| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 4119-1967 | 固定電阻器電流噪聲測量方法 | Method of measurement of current noise generated in fixed resistors |
| BS 4142-1997 | 評定工業噪聲對住宅和工業混合地區的影響的定方法 | Method for rating industrial noise affecting mixed residential and industrial areas |
| BS 5228-1-2009 | 結構和開口點噪聲和振動控制規程.噪聲 | Code of practice for noiseand vibration control onconstruction and open sites –Part 1: Noise |
| BS 5228-2-2009 | 建筑和露天場地的噪聲和振動控制用實施規程.振動 | Code of practice for noiseand vibration control onconstruction and open sites –Part 2: Vibration |
| BS 5330-1976 | 估計噪聲造成聽覺障礙風險的試驗方法 | Method of test for estimating the risk of hearing handicap due to noise exposure |
| BS 5502-32-1990 | 農用建筑物和構筑物.第32部分:噪聲衰減指南 | Buildings and structures for agriculture - Guide to noise attenuation |
| BS 5721-1979 | 飛機噪聲測量用頻率加權(D加權)規范 | Specification for frequency weighting for the measurement of aircraft noise (D-weighting) |
| BS 5944-1-1992 | 液壓動力系統和部件氣動噪聲測量.第1部分:液壓泵試驗方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps |
| BS 5944-2-1992 | 液壓動力系統和部件氣動噪聲測量.第2部分:電動機試驗方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors |
| BS 5944-6-1992 | 液壓動力系統和部件氣動噪聲測量.第6部分:平行六面體傳聲器陣列測試液壓泵噪聲 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array |
| BS 6086-1981 | 汽車內噪聲的測量方法 | Method of measurement of noise inside motor vehicles |
| BS 6805-1-1987 | 測定和檢驗機械和設備固定噪聲傳播值的統計方法.第1部分:術語詞匯 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Glossary of terms |
| BS 6805-2-1987 | 測定和檢驗機械和設備設定噪聲傳播值的統計方法.第2部分:測定及檢驗專用機器設定值的方法 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Method for determining and verifying stated values for individual machines |
| BS 6805-3-1987 | 測定和檢驗機械和設備設定噪聲傳播值的統計方法.第3部分:采用簡易法(瞬間)對成批機器設定值的測定和檢驗方 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Method for determining and verifying stated values for batches of machines using a simple (transition) method |
| BS 6805-4-1987 | 測定和檢驗機械和設備固定噪聲傳播值的統計方法.第4部分:檢定和驗證多批機器設定價值的方法 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Methods for determining and verifying stated values for batches of machines |
| BS 7135-2-1989 | 計算機和業務設備輻射的噪聲.第2部分:高頻噪聲的測量方法 | Noise emitted by computer and business equipment - Method of measurement of high-frequency noise |
| BS 7135-3-1989 | 計算機和業務設備輻射的噪聲.第3部分:測定和核實申報噪聲輻射值的方法 | Noise emitted by computer and business equipment - Method for determining and verifying declared noise emission values |
| BS 7140-1995 | 木材加工機床發出的空氣傳播噪聲.木材加工機床的操作條件 | Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines |
| BS 7445-1-2003 | 環境噪聲的描述和測量.量值和程序指南 | Description and measurement of environmental noise - Guide to quantities and procedures |
| BS 7445-2-1991 | 環境噪聲的描述和測量.陸地用數據采集指南 | Description and measurement of environmental noise - Guide to the acquisition of data pertinent to land use |
| BS 7445-3-1991 | 環境噪聲的描述和測量.噪聲極限應用指南 | Description and measurement of environmental noise - Guide to application to noise limits |
| BS 8233-1999 | 建筑物的隔音和噪聲降低.實施規范 | Sound insulation and noise reduction for buildings - Code of practice |
| BS DD ISO/TS 15666-2003 | 聲學.用社會和社會聲學測量法評定噪聲干擾 | Acoustics - Assessment of noise annoyance by means of social and socio-acoustic surveys |
| BS DD ISO/TS 4869-5-2006 | 聲學.聽力保護.與新的試驗?zāi)繕?biāo)對應的噪聲消減估算方法 | Acoustics - Hearing protectors - Method for estimation of noise reduction using fitting by inexperienced test subjects |
| BS EN 12053-2001+A1-2008 | 工業卡車安全.噪聲排放測量用試驗方法 | Safety of industrialtrucks — Test methodsfor measuring noiseemissions |
| BS EN 12354-5-2009 | 建筑聲學.從構件性能評估建筑物的聲學性能.第5部分:服務設備產生的噪聲等級 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the serviceequipment |
| BS EN 12545-2000+A1-2009 | 鞋類、皮革和人造革制品生產機械.噪聲試驗規程.通用要求 | Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
| BS EN 12549-1999+A1-2008 | 聲學.緊固件旋擰工具的噪聲試驗規范.工程法 | Acoustics - Noise test code for fastener driving tools - Engineering method |
| BS EN 12736-2002 | 電力驅動的道路車輛.用運載工具車上帶的充電器充電過程中車輛在空中發出的噪聲.聲功率水平的測定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
| BS EN 13023-2003+A1-2010 | 打印、紙張加工、造紙機械和輔助設備的噪聲測量.準確度等級為2級和3級 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
| BS EN 14366-2004 | 廢水裝置噪聲的實驗室測量 | Laboratory measurement of noise from waste water installations |
| BS EN 14375-2003 | 廢水裝置噪聲的實驗室測量 | Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
| BS EN 14462-2005+A1-2009 | 表面處理設備.包括其輔助操作裝置在內的表面處理設備的噪聲試驗規程.精度等級2和3 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
| BS EN 1501-4-2007 | 垃圾收集車及其相關提升裝置.一般要求和安全性要求.垃圾收集車的噪聲試驗規范 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Noise test code for refuse collection vehicles |
| BS EN 15036-1-2006 | 加熱鍋爐.熱產生器發出空氣噪聲的試驗規則.熱產生器的空氣噪聲 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators |
| BS EN 15036-2-2006 | 加熱鍋爐.熱產生器空氣噪聲發射的試驗規則.熱產生器出口發出的燃?xì)庠肼? | Heating boilers. Test regulations for airborne noise emissions from heat generators. Flue gas noise emissions at the outlet of the heat generator |
| BS EN 15461-2008+A1-2010 | 鐵路應用設施.噪聲排放.火車經過時噪聲測量用軌道部件的動態功能特性 | Railway applications. Noise emission. Characterization of the dynamic properties of track selections for pass by noise measurements |
| BS EN 15610-2009 | 鐵路應用設施.噪聲發射與火車經過時噪聲產生相關的鐵軌粗糙度測量 | Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
| BS EN 1746-1999 | 機械安全.安全標準噪聲條款編寫指南 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| BS EN 1915-4-2004+A1-2009 | 地勤支援設備.一般要求.第4部分:噪聲測量方法和減振 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methodsand reduction |
| BS EN 352-5-2002 | 護聽器.安全要求和試驗.有源噪聲降低型耳套 | Hearing protectors - Safety requirements and testing - Active noise reduction ear muffs |
| BS EN 415-9-2009 | 包裝機械的安全性.精度2和3級包裝生產線及相關設備,包裝機械噪聲測量方法 | Safety of packagingmachinesPart 9: Noise measurement methodsfor packaging machines, packaginglines and associated equipment, gradeof accuracy 2 and 3 |
| BS EN 60534-8-1-2005 | 工業過程控制閥.第8-1部分:噪聲問題.空氣動力流流經控制閥產生噪聲的實驗室測量 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| BS EN 60534-8-2-1993 | 工業過程控制閥.噪聲的考慮.流動液流經控制閥產生噪聲的實驗室測量 | Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| BS EN 60534-8-3-2000 | 工業流程控制閥.噪聲.控制閥氣動噪聲預測法 | Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method - Control valve aerodynamic noise prediction method |
| BS EN 60534-8-4-2005 | 工業過程控制閥.第8-4部分:噪聲考慮.液體動力流產生噪聲的預測 | Industrial-processcontrol valves —Part 8-4: Noise considerations —Prediction of noise generated byhydrodynamic flow |
| BS EN 60704-1-1997 | 測定家用和類似用途電氣設備發出的氣載噪聲的試驗規程.一般要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - General requirements |
| BS EN 60704-1-2010 | 家用和類似用途電器.空氣噪聲測定的試驗規程.一般要求 | Household and similar electrical appliances - Test code for the determination of airborne noise - General requirements |
| BS EN 60704-2-1-2001 | 測定家用和類似用途電器氣載噪聲排放試驗規程.專門要求.真空吸塵器專門要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Particular requirements for vacuum cleaners |
| BS EN 60704-2-10-2004 | 家用和類似用途電器.測定空中傳播噪聲的試驗規范.電灶、烤爐、烤架、微波爐和任何其他這類電器組合的特殊要 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these |
| BS EN 60704-2-11-1999 | 測定家用和類似用途電器輻射氣載噪聲的試驗規程.專門要求.電動食品制備用具 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Electrically operated food preparation appliances |
| BS EN 60704-2-13-2000+A2-2008 | 家用及類似用途電器.氣載噪聲測定的試驗規程.第2-13部分:抽油煙機的詳細要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13:Particular requirements for range hoods |
| BS EN 60704-2-2-2010 | 家用和類似電器.氣載噪聲測試規程.暖風機的詳細要求 | Household and similar appliances - Test code for the determination of airborne acoustical noise - Particular requirements for fan heaters |
| BS EN 60704-2-3-2002 | 家用和類似電器.測定空氣傳播噪聲的試驗規程.洗碗機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Particular requirements for dishwashers |
| BS EN 60704-2-4-2001 | 家用和類似用途電器.測定氣載噪聲試驗規程.洗衣機和旋轉脫水機詳細要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Particular requirements for washing machines and spin extractors |
| BS EN 60704-2-5-2005 | 家用和類似用途電器.空中傳播噪聲測定的試驗規程.蓄熱式房間電暖器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Particular requirements for electric thermal storage room heaters |
| BS EN 60704-2-6-2004 | 家用和類似用途電器.氣載噪聲測定的試驗規則.滾筒式干燥機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Particular requirements for tumble dryers |
| BS EN 60704-2-7-1998 | 測定家用和類似用途電器輻射氣載噪聲的試驗規則.專門要求.風扇專門專門要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Particular requirements for fans |
| BS EN 60704-2-8-1997 | 家用和類似用途電器.測定氣載噪聲的試驗規程.電動剃須刀專門要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Particular requirements for electric shavers |
| BS EN 60704-2-9-2003 | 家用和類似用途電器.測定空中傳播噪聲的試驗規范.電動頭發護理器具的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Particular requirements for electric hair care appliances |
| BS EN 60704-3-2006 | 家用和類似用途電器.氣載噪聲的測定用試驗規則 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Procedure for determining and verifying declared noise emission values |
| BS EN 60835-3-4-1993 | 數字微波無線電傳輸系統使用設備的測量方法.衛星地面站的測量.低噪聲放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Measurements on satellite earth stations - Low noise amplifier |
| BS EN 61265-1995 | 電聲學.航空噪聲測量.運輸機噪聲檢定測量三分之一帶寬倍頻聲壓級裝置性能要求 | Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft |
| BS EN 62150-4-2010 | 纖維光學有源元件和器件.試驗和測量規程.用于時域光學檢測系統的相對強度噪聲 | Fibre optic active components and devices - Test and measurement procedures - Relative intensity noise using a time-domain optical detection system |
| BS EN 62333-1-2006 | 數字裝置和設備用噪聲抑制片.定義和一般性能 | Noise suppression sheet for digital devices and equipment - Definitions and general properties |
| BS EN 62333-2-2006 | 數字裝置和設備用噪聲抑制片.測量方法 | Noise suppression sheet for digital devices and equipment - Measuring methods |
| BS EN 62333-3-2010 | 數字裝置和設備用噪聲抑制片.噪聲抑制片的參數特性 | Noise suppression sheet for digital devices and equipment - Characterization of parameters of noise suppression sheet |
| BS EN ISO 11200-2009 | 聲學.機械設備發出的噪聲.在操作工位和其它指定地點測定聲壓級的基礎標準用導則 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| BS EN ISO 11201-2010 | 聲學.機器和設備發射的噪聲.在一個反射平面上方可忽略環境校正條件下進行工作位置和其他指定位置的發射聲壓 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| BS EN ISO 11202-2010 | 聲學.機械裝置及設備發出的噪聲.應用近似環境更正法進行工作地點和其它試驗場所聲壓級的測量 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| BS EN ISO 11203-2009 | 聲學.機械設備發出的噪聲.根據聲功率級測定工作站和其他指定位置的發射聲壓級 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| BS EN ISO 11204-2010 | 聲學.機械裝置及設備發出的噪聲.用精確環境修正測定工作地點和其它試驗場所聲壓級 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| BS EN ISO 11205-2009 | 聲學.機械設備發出的噪聲.用聲強法測定工作現場和其它特定位置發出的噪聲聲壓級用工程法 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| BS EN ISO 11688-1-2009 | 聲學.低噪聲機器和設備設計的推薦實用規程.計劃 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Planning |
| BS EN ISO 11689-1996 | 聲學.機械和設備發射噪聲數據的比較方法 | Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment |
| BS EN ISO 11690-1-1997 | 聲學.低噪聲機器工作間設計的推薦實施規程.噪聲控制策略 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Noise control strategies |
| BS EN ISO 11690-2-1997 | 聲學.低噪聲機器工作間設計的推薦實施規程.噪聲控制測量 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Noise control measures |
| BS EN ISO 11690-3-1999 | 聲學.低噪聲機械工作間設計的推薦實施規程.工作室中聲傳播和噪聲預測 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Sound propagation and noise prediction in workrooms |
| BS EN ISO 11819-1-2000 | 聲學.路面對交通噪聲影響力的測量.旁路統計法 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Statistical pass-by method |
| BS EN ISO 12001-2009 | 聲學.機械設備發射的噪聲.噪聲測試規范起草和表述的準則 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code |
| BS EN ISO 14163-1998 | 聲學.消音器噪聲控制指南 | Acoustics. Guidelines for noise control by silencers |
| BS EN ISO 14509-1-2008 | 小型船.動力娛樂船排放的空氣噪聲.經過測量程序 | Small craft - Airborne sound emitted by powered recreationalcraft - Part 1: Pass-by measurement procedures |
| BS EN ISO 14509-2-2006 | 小艇.動力娛樂艇空氣噪聲測定.利用參考艇作聲評估 | Small craft - Airborne sound emitted by powered recreational craft - Sound assessment using reference craft |
| BS EN ISO 15744-2008 | 手持式非電類動力工具.噪聲測量方法.工程法(2級) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
| BS EN ISO 1680-2000 | 聲學.旋轉電機發出的空氣噪聲的測量試驗規范 | Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machinery |
| BS EN ISO 17201-1-2005 | 聲學.射擊范圍內噪聲.槍口炸震的測定 | Acoustics - Noise from shooting ranges - Part 1:Determination of muzzle blast by measurement |
| BS EN ISO 17201-2-2006 | 聲學.射程內噪聲.通過計算估計槍口炸震和射彈噪音 | Acoustics - Noise from shooting ranges - Estimation of muzzle blast and projectile sound by calculation |
| BS EN ISO 17201-3-2010 | 聲學.射擊場的噪聲.噪聲傳輸計算用指南 | Acoustics - Noise from shooting ranges - Guidelines for sound propagation calculations |
| BS EN ISO 17201-4-2006 | 聲學.射擊范圍內噪聲.發射噪音預報 | Acoustics - Noise from shooting ranges - Prediction of projectile sound |
| BS EN ISO 17201-5-2010 | 聲學.射擊范圍內噪聲.噪聲管理 | Acoustics - Noise from shooting ranges - Noise management |
| BS EN ISO 2151-2008 | 聲學.壓縮機和真空泵的噪聲試驗規程.工程法(2級) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
| BS EN ISO 22868-2008 | 林用機械.帶內燃機的便攜手持式機械的噪聲試驗規范.工程法(2級準確度) | Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy) |
| BS EN ISO 2922-2001 | 聲學.內河航道和港灣船舶發出空氣噪聲的測量 | Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours |
| BS EN ISO 3381-2006 | 鐵路設施.聲學.有軌車內噪聲的測量 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles |
| BS EN ISO 3740-2001 | 聲學.噪聲源的聲壓級的測定.基礎標準使用導則 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
| BS EN ISO 3741-2010 | 聲學.聲壓法測定噪聲源聲功率級.混響室精密法 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms |
| BS EN ISO 3743-1-2010 | 聲學.利用聲壓的噪聲源聲功率級和聲能級的測定.專用混響現場內小型可移動聲源的工程方法.硬質圍墻試驗室用 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fields. Comparison method for a hard-walled test room |
| BS EN ISO 3743-2-2009 | 聲學.聲壓法測定噪聲源的聲功率級.混響聲場中小聲源和移動聲源的工程測量方法.特殊混響試驗間用方法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms |
| BS EN ISO 3744-2010 | 聲學.使用聲壓測定噪聲源的聲功率級和聲能級.反射面上方近似自由場的工程法 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane |
| BS EN ISO 3745-2009 | 聲學.用聲壓法測定噪聲源聲功率級.消聲室和半消聲室精密法 | Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for anechoic and semi-anechoic rooms |
| BS EN ISO 3746-2010 | 聲學.聲壓法測定噪聲源的聲功率級和聲能級.反射面上采用包絡測面積的調查法 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane |
| BS EN ISO 3747-2010 | 聲學.用聲壓測定噪聲源的聲功率級和聲能量級.混響環境中現場用工程測量法 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment |
| BS EN ISO 389-4-1999 | 聲學.測聽設備的校準參照區.掩蔽噪聲的參考等級 | Acoustics - Reference zero for the calibration of audiometric equipment - Reference levels for narrow-band masking noise |
| BS EN ISO 7235-2009 | 聲學.風道消音裝置和風道末端裝置的實驗室測量程序.插入損失、流動噪聲和總壓力損失 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss |
| BS EN ISO 7779-2010 | 聲學.信息技術和通訊設備排放的空氣噪聲的測量 | Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment |
| BS EN ISO 9612-2009 | 聲學.職業噪聲暴露的測定.工程法(ISO 9612-2009) | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
| BS EN ISO 9614-1-2009 | 聲學.利用聲音強度測定噪聲源功率級.離散點測量 | Acoustics.Determination ofsound power levels of noisesources using sound intensity.Part 1: Measurement at discrete points |
| BS EN ISO 9614-2-1997 | 聲學.利用聲強度對噪聲源聲功率級別的測定.使用掃描測量法 | Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement by scanning |
| BS EN ISO 9614-3-2009 | 聲學.用聲強測定噪聲源的聲功率級.掃描測量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Precision method for measurement by scanning |
| BS EN ISO 9902-1-2001+A1-2009 | 紡織機械.噪聲試驗規程.通用要求 | Textile machinery - Noise test code - Common requirements |
| BS EN ISO 9902-2-2001+A1-2009 | 紡織機械.噪聲試驗規程.紡紗前紡及紡紗機械 | Textile machinery - Noise test code - Spinning preparatory and spinning machinery |
| BS EN ISO 9902-3-2001+A1-2009 | 紡織機械.噪聲試驗規程.非紡織機械 | Textile machinery - Noise test code - Nonwoven machinery |
| BS EN ISO 9902-4-2001+A1-2009 | 紡織機械.噪聲試驗規程.紗的加工、纜索及繩制造機械 | Textile machinery - Noise test code - Yarn processing, cordage and rope manufacturing machinery |
| BS EN ISO 9902-5-2001+A1-2009 | 紡織機械.噪聲試驗規程.織造和針織前紡機械 | Textile machinery - Noise test code - Weaving and knitting preparatory machinery |
| BS EN ISO 9902-6-2001+A1-2009 | 紡織機械.噪聲試驗規程.織物制造機械 | Textile machinery - Noise test code - Fabric manufacturing machinery |
| BS EN ISO 9902-7-2001+A1-2009 | 紡織機械.噪聲試驗規程.第7部分:染色和精整設備 | Textile machinery - Noise test code - Part 7:Dyeing and finishing machines |
| BS EN ISO/TR 11688-2-2001 | 聲學.低噪聲機械和設備的設計推薦規程.低噪聲設計的物理學說明 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Introduction to the physics of low-noise design |
| BS ISO 13332-2001 | 往復式內燃機.在發動機底座處測量的由高速和中速往復式內燃機產生的結構噪聲的試驗規程 | Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| BS ISO 13472-1-2002 | 聲學.施工現場路面對噪聲吸收性能的測量.擴大表面法 | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Extended surface method |
| BS ISO 15664-2001 | 聲學.露天設備噪聲控制設計程序 | Acoustics - Noise control design procedures for open plant |
| BS ISO 20283-3-2006 | 機械振動.測量船上機械振動.船上設備預安裝振動噪聲測量 | Mechanical vibration - Measurement of vibration on ships - Pre-installation vibratory noise measurement of shipboard equipment |
| BS ISO 20906-2010 | 聲學.機場附近飛機噪聲的無人監測 | Acoustics. Unattended monitoring of aircraft sound in the vicinity of airports |
| BS ISO 230-5-2000 | 機床測試規范.噪聲輻射的測定 | Test code for machine tools. Determination of the noise emission |
| BS ISO 6798-1996 | 往復式內燃機.空氣傳播噪聲的測量.工程法和測量法 | Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method |
| BS ISO 8297-1995 | 聲學.聲壓級環境評估用多源工廠噪聲強度測定.工程法 | Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method |
| BS ISO 8525-2008 | 機械工具發出的空氣噪聲.金屬切割機的運行條件 | Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines |
| BS ISO 8579-1-2002 | 齒輪裝置驗收規程.空氣中噪聲試驗規程 | Acceptance code for gear units - Test code for airborne sound |
| BS ISO 9568-1996 | 電影技術.影院、審片室及配音室的背景噪聲級 | Cinematography - Background acoustic noise levels in the theatres, review rooms and dubbing rooms |
| BS ISO 9611-1996 | 聲學.關于由連接結構產生噪聲輻射的結構載振動噪聲源的特性描述.機械裝置彈性連接接觸點聲速測量 | Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted |
| BS PD CEN/TR 15068-2009 | 氣焊設備.焊接、切割、加熱、釬焊和錫焊用吹管發出的噪聲的測量.測量方法 | Gas welding equipment— Measurement ofnoise emitted byblowpipe for welding,cutting, heating,brazing and soldering— Measurementmethod |
| 編號 | 中文名稱 | 英文名稱 |