| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 18005-1-2002 | 城鎮規劃的噪聲控制.第1部分:規劃的基本原則和指導 | Noise abatement in town planning - Part 1: Fundamentals and directions for planning |
| DIN 25475-1-2004 | 核設施.操作監控.第1部分:松動部件檢測用結構噪聲監測 | Nuclear facilities - Operational monitoring - Part 1: Monitoring of structure-borne sound for loose parts detection |
| DIN 44402-19-1973 | 電子管電氣性能測量.第19部分:由于機械或聲激勵引起的噪聲測量 | Measurement of the electrical properties of electronic tubes; measurement of noises due to mechanical or acoustic excitations |
| DIN 44402-6-1972 | 電子管電氣性能測試.第6部分:噪聲系數的測量方法 | Measurement of the electrical properties of electronic tubes and valves; methods of measuring noise factor |
| DIN 44402-8-1973 | 電子管電氣性能測量.第8部分:當量噪聲電阻的測量 | Measurements of the electrical properties of electronic tubes; measurement of equivalent noise resistance |
| DIN 44899-6-1986 | 電熱水器.額定容量為1000升以內.低噪聲水平設計的要求 | Electrical water heaters; rated capacity up to 1000 litres; requirements for low-noice level design |
| DIN 45405-1983 | 音響系統中的噪聲級測量 | Noise level measurement in sound systems |
| DIN 45635 Bb.1-1979 | 機器發出噪聲的測量.空氣中噪聲測量.包面法.包面法試驗（試驗記錄）報告表 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Test report (test record) form for enveloping surface method |
| DIN 45635-1-1984 | 機器噪聲測量.空氣載聲測量.包面法.分成３級精度的基本測量法 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; basic method, divided into 3 grades of accuracy |
| DIN 45635-11-1987 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.內燃機 | Measurement of noise emitted by machines; airborne noise emission, enveloping surface method; internal combustion engines |
| DIN 45635-12-1978 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.電氣開關裝置和控制裝置 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Electrical switchgear and control gear |
| DIN 45635-14-1980 | 機器噪聲的測量.空氣噪聲測量.包絡面法.空氣冷熱交換器（空氣冷卻器） | Noise Measurement on Machines; Airborne Noise Measurement, Enveloping Surface Method, Air-cooled Heat Exchangers (Air Coolers) |
| DIN 45635-15-1987 | 機器空氣噪聲的測量.包絡面法.熱電站用的渦輪發電機組 | Measurement of airborne noise emitted by machines; enveloping surface method; turbogenerator sets for use in thermal power stations |
| DIN 45635-16-1978 | 機器排放的空氣傳播噪聲的測量.第16部分:包洛面法.機床 | Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method, Machine Tools |
| DIN 45635-1601-1978 | 機器空氣噪聲的測量.包絡面法.金屬加工機床、特殊工具、車床的規定 | Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine, Tools Special, Stipulations for Lathes |
| DIN 45635-1602-1978 | 機器排放的空氣傳播噪聲的測量.第1602部分:包洛面法.金屬加工機床.落鍛錘的特殊規定 | Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Drop Forging Hammers |
| DIN 45635-1603-1978 | 機器排放的空氣傳播噪聲的測量.第1603部分:包洛面法.金屬加工機床.通用壓力機的特殊規定 | Measurements of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Universal Presses |
| DIN 45635-1605-1981 | 機器空氣噪聲的測量.包絡面法.金屬加工機床.銑床 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines; milling machines |
| DIN 45635-1606-1984 | 機器空氣噪聲的測量.包絡面法.金屬加工機床.鉆床 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines, drilling machines |
| DIN 45635-1607-1984 | 機器空氣噪聲的測量.包絡面法.金屬加工機床.滾齒機的特殊規定 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines, gear hobbing machines |
| DIN 45635-1609-1984 | 機器排放的空氣傳播噪聲測量.包絡面法.金屬加工機床.圓形鋸床 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines, circular sawing machines |
| DIN 45635-1610-1984 | 機器空氣噪聲的測量.包絡面法.金屬加工機床.磨床的特殊規定 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines grinding machines |
| DIN 45635-1650-1978 | 機器排放的空氣傳播噪聲的測量.第1650部分:包洛面法.木材加工機床.刨床 | Measurement of airborne noise emitted by machines; enveloping surface method, woodworking machines, planing machines |
| DIN 45635-1651-1990 | 機器空氣噪聲的測量.包絡面法.木工機床.臺式單鋸片圓盤鋸的特殊規定 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single blade circular saw benches |
| DIN 45635-1652-1978 | 機器排放的空氣傳播噪聲的測量.第1652部分:包洛面法.單面造型機木材加工機床 | Measurement of airborne noise emitted by machines; enveloping surface method, woodworking machines, one side moulding machines |
| DIN 45635-1653-1982 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.木工機床.雙頭刨床的特殊規定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for double end shaping machines |
| DIN 45635-1654-1982 | 機器空氣噪聲的測量.空氣噪聲測量.包面法.木工機床.多工部邊條機和線腳機的特殊規定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for multistage edge lipping and banding machines |
| DIN 45635-1655-1982 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.木工機床.最終修整機、邊角加工機和鑲邊機的特殊規定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for final trimming machines and edge lipping and banding machines |
| DIN 45635-1656-1982 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.木工機床.雙面及多面刨銑床的特殊規定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for two-side and multi-side planing and milling machine |
| DIN 45635-1657-1983 | 機器空氣噪聲的測量.包絡面法.木工機床.雙定尺圓鋸床的特殊規定 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double dimensions circular sawing machines |
| DIN 45635-1658-1986 | 機器排放的空氣傳播噪聲的測量.第1658部分:包洛面法.橫切單沖程圓鋸木材加工機床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single blade stroke circular sawing machines for cross-cutting |
| DIN 45635-1659-1986 | 機器排放的空氣傳播噪聲的測量.第1659部分:包洛面法.板材成形機木材加工機床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; panel sizing machines |
| DIN 45635-1660-1986 | 機器排放的空氣傳播噪聲的測量.第1660部分:包洛面法.造模銑切機木材加工機床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; routing machines |
| DIN 45635-1661-1986 | 機器排放的空氣傳播噪聲的測量.第1661部分:包洛面法.臺式帶鋸木材加工機床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; table band sawing machines |
| DIN 45635-1662-1986 | 機器排放的空氣傳播噪聲的測量.第1662部分:包洛面法.多軸單端開榫機木材加工機床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single-end tenoning machines with several spindles |
| DIN 45635-1663-1987 | 機器排放的空氣傳播噪聲的測量.第1663部分:包洛面法.木材加工機床打磨機 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines sanding machines |
| DIN 45635-1664-1987 | 機器排放的空氣傳播噪聲的測量.第1664部分:包洛面法.木材加工機床.多鋸條圓形鋸床 | Measurement of airborne noise emitted by maschines; enveloping surface method; woodworking machines; multi-blade circular sawing machines |
| DIN 45635-1665-1988 | 機器空氣噪聲的測量.包絡面法.木工機床.雙頭開榫機 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double end tenoning machines |
| DIN 45635-1666-1988 | 機器空氣噪聲的測量.包絡面法.木工機床.粗切割用雙刃圓鋸床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double edging circular sawing machines for rough cutting |
| DIN 45635-1667-1988 | 機器空氣噪聲的測量.包絡面法.木工機床.鋸片雙向行程橫向鋸切環形鋸床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double blade stroke circular sawing machines for cross cutting |
| DIN 45635-22-1985 | 機器空氣噪聲的測量.空氣噪聲傳播.包絡面法.照明彈 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; flares |
| DIN 45635-23-2003 | 機器噪聲測量.空氣噪聲發射包絡面法.第23部分:齒輪傳動 | Measurement of noise emitted by machines - Airborne noise emission enveloping surface method - Part 23: Gear transmisson |
| DIN 45635-25-1980 | 機器排放的空氣傳播噪聲的測量.第25部分:包洛面法.氣焊及等離子焊噴嘴和機器 | Measurement of airborne noise emitted by machines; enveloping surface method, oxy-fuel gas and plasma torches and machines |
| DIN 45635-26-1979 | 機器空氣噪聲的測量.包絡面法.液壓泵 | Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps |
| DIN 45635-28-1980 | 機器空氣噪聲的測量.包絡面法.包裝和類似機器 | Measurement of airborne noise emitted by machines; enveloping surface method; packaging and allied machinery |
| DIN 45635-29-1980 | 機器空氣噪聲的測量.包絡面法.食品、飲料和類似機器 | Measurement of airborne noise emitted by machines; enveloping surface method; food, drink and allied machinery |
| DIN 45635-31 Bb.1-1984 | 機器空氣噪聲的測量.包絡面法.測量報告表.粉碎機 | Measurement of airborne noise emitted by machines; enveloping surface method; form for measurement report, comminuting machines |
| DIN 45635-31-1980 | 機器排放的空氣傳播噪聲的測量.第31部分:包洛面法.粉碎機 | Measurement of airborne noise emitted by machines; enveloping surface method, comminuting machines |
| DIN 45635-33-1979 | 機器空氣噪聲的測量.包絡面法.建筑設備 | Measurement of airborne noise emitted by machines; enveloping surface method, construction equipment |
| DIN 45635-34-1984 | 機器排放的空氣傳播噪聲的測量.第34部分:包洛面法.卡盤操作式裝配工具 | Measurement of airborne noise emitted by machines; enveloping surface method; cartridge-operated fixing tools |
| DIN 45635-35-1986 | 機器噪聲測量.空氣載聲測量.包面法.帶電動壓縮機的熱泵 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; heat pump units with electrically driven compressors |
| DIN 45635-37-1980 | 機器空氣噪聲的測量.包絡面法.塑料和橡膠加工機器 | Measurement of airborne noise emitted by machines; enveloping surface method; machinery for the processing of plastic and rubber |
| DIN 45635-38-1986 | 機器排放的噪聲測量.空氣傳播的噪聲.第38部分:包洛面法、混響室法及通道法.排風扇 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method, reverberation room method and in-duct method; fans |
| DIN 45635-40-1987 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.水力發電站機組和水泵設備 | Measurement of airborne noise emitted by machines; enveloping surface method; machine sets in hydroelectric power stations and water pumping plants |
| DIN 45635-41 Bb.1-1986 | 機器排放的噪聲測量.空氣傳播的噪聲.第41 Bb.1部分:包洛面法.液壓組件(試驗報告樣表) | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form) |
| DIN 45635-41-1986 | 機器排放的噪聲測量.空氣傳播的噪聲.第41部分:包洛面法.液壓組件 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies |
| DIN 45635-45-1988 | 機器排放的空氣傳播噪聲的測量.第45部分:包洛面法.連續輸送機 | Measurement of airborne noise emitted by machines; enveloping surface method; continuous handling equipment |
| DIN 45635-46-1985 | 機器空氣噪聲的測量.空氣噪聲傳播.包絡面法.冷卻塔 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; cooling towers |
| DIN 45635-47-1985 | 機器空氣噪聲的測量.空氣噪聲傳播.包絡面法.煙囪 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; chimneys |
| DIN 45635-50-1987 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.閥門 | Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves |
| DIN 45635-51-1988 | 機器空氣噪聲的測量.包絡面法.電影攝影機 | Measurement of airborne noise emitted by machines; enveloping surface method; motion picture cameras |
| DIN 45635-52-1986 | 機器排放的空氣傳播噪聲的測量.第52部分:包洛面法.礦山柴油機車和礦山軌道車 | Measurement of airborne noise emitted by machines; enveloping surface method; mine diesel locomotives and mine road railers |
| DIN 45635-53-1986 | 機器排放的空氣傳播噪聲的測量.第53部分:包洛面法.柴油牽引車 | Measurement of airborne noise emitted by machines; enveloping surface method; diesel traction trolleys |
| DIN 45635-54-1986 | 機器排放的空氣傳播噪聲的測量.第54部分:包洛面法.礦山無軌車輛 | Measurement of airborne noise emitted by machines; enveloping surface method; mine trackless vehicles |
| DIN 45635-55-1986 | 機器排放的空氣傳播噪聲的測量.第55部分:包洛面法.磨擦輪和/或齒輪傳動調軌車 | Measurement of airborne noise emitted by machines; enveloping surface method; shunting trolleys with friction-wheel and/or gearwheel drive |
| DIN 45635-56-1986 | 機器排放的噪聲測量.空氣傳播的噪聲.第56部分:包洛面法和通道法.風扇輔助熱風發生器、風扇輔助空氣加熱器和 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method and in-duct method; fan-assisted warm air generators, fan-assisted air heaters and fan units of air handling devices |
| DIN 45635-57-1986 | 機器排放的噪聲測量.空氣傳播的噪聲.第57部分:包洛面法.外側馬達 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; outboard motors |
| DIN 45635-60-1989 | 機器排放的空氣傳播噪聲的測量.第60部分:包洛面法.靜止圖象和動態圖象放映機 | Measurement of airborne noise emitted by machines; enveloping surface method; still picture and motion-picture projectors |
| DIN 45635-61-1990 | 機器噪音測量.氣載噪聲測量.包面法.起重機 | Measurement of airborne noise emitted by machines; enveloping surface method; cranes |
| DIN 45635-62-1989 | 機器排放的空氣傳播噪聲的測量.第62部分:包洛面法.混凝土磚塊、板條、管道和預制件生產用機器和設備 | Measurement of airborne noise emitted by machines; enveloping surface method; machines and equipment for the manufacture of concrete blocks, slabs, pipes and prefabricated elements |
| DIN 45635-8-1985 | 機器空氣噪聲的測量.結構噪聲的測量.基本要求 | Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements |
| DIN 45640-2-1993 | 內河和碼頭船舶發出的噪聲.測定聲功率級的包絡面法 | Noise emitted by vessels on inland water-ways and harbours; enveloping surface method for the determination of the sound power level |
| DIN 45643-2011 | 飛機噪聲的測量和評定.德文和英文文本 | Measurement and assessment of aircraft sound; Text in German and English |
| DIN 45645-1-1996 | 從測量數據中算出額定聲級.鄰近區域發出的噪聲 | Determination of rating levels from measurement data - Part 1: Noise immission in the neighbourhood |
| DIN 45681 Berichtigung 2-2006 | 聲學.噪聲音調組成測定和噪聲輻射評定用音調調整測定.對CD的DIN 45681:2005-03的勘誤 | Acoustics - Determination of tonal components of noise and determination of a tone adjustment for the assessment of noise immissions, Corrigenda to DIN 45681:2005-03, with CD |
| DIN 45681-2005 | 聲學.噪聲音調組成測定和噪聲輻射評定用音調調整測定 | Acoustics - Determination of tonal components of noise and determination of a tone adjustment for the assessment of noise immissions |
| DIN 45684-1-2006 | 聲學.飛機場飛機發射噪聲的測定.第1部分:計算方法 | Acoustics - Determination of aircraft noise exposure at airfields - Part 1: Calculation method |
| DIN 45684-2-2007 | 聲學.飛機場飛機發射噪聲的測定.第2部分:聲學和飛機操作參數的測定 | Acoustics - Determination of aircraft noise exposure at airfields - Part 2: Determination of acoustic and aircraft operational parameters |
| DIN 45688-2005 | 排放控制區噪聲和振動檢驗的實驗室的能力的特定要求 | Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control |
| DIN 52210-6-1989 | 建筑物聲學檢驗.氣載噪聲和隔音.第6部分:噪聲級差測量 | Testing of acoustics in buildings; airborne impact and sound insulation; measurement of level difference |
| DIN 52221-2006 | 建筑聲學試驗.建筑物內技術裝備產生的結構噪聲的測量 | Tests in building acoustics - Measurements of structure-borne sound produced by technical appliances in buildings |
| DIN 5426-1-1995 | 滾動軸承.滾動軸承的振動噪聲.第1部分:結構載振動噪聲的測量方法 | Rolling bearings - Rolling bearing vibration and noise - Part 1: Methods for measurement of structure-borne noise |
| DIN CEN/TS 1793-4-2004 | 道路交通噪聲降低裝置.聲學性能測定的試驗方法.第4部分:固有特征.聲音衍射的現場測定值 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In-situ values of sound diffraction; German version CEN/TS 1793-4:2003 |
| DIN CEN/TS 1793-5-2003 | 道路交通減噪裝置.聲音性能測試方法.第5部分:內在特性.聲音反射和氣載噪聲隔絕現場測定值 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics; In situ values of sound reflection and airborne sound insulation; German version CEN/TS 1793-5:2003 |
| DIN EN 12053-2009 | 工業卡車的安全.噪聲輻射測量的試驗方法(包括修改件A1:2008),DIN EN 12053:2009-07的英文版本 | Safety of industrial trucks - Test methods for measuring noise emissions (includes Amendment A1:2008); English version of DIN EN 12053:2009-07 |
| DIN EN 12102-2008 | 空間加熱和制冷用帶電力驅動壓縮機的空調、液體冷卻組件、熱泵和減濕器.空氣噪聲的測量.聲功率級的測定 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level; English version of DIN EN 12102:2008-09 |
| DIN EN 1265-2009 | 機械安全性.鑄造機械和設備用噪聲試驗規范(包括修改件A1-2008).英文版本DIN EN 1265-2009-07 | Safety of machinery - Noise test code for foundry machines and equipment (includes Amendment A1:2008); English version of DIN EN 1265:2009-07 |
| DIN EN 12736-2003 | 電力推動道路車輛.運載工具上充電器充電過程中車輛發出的空氣噪聲.聲功率級測定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level; German version EN 12736:2001 |
| DIN EN 13023-2010 | 印刷、紙張加工、造紙機與設備的噪聲測量方法.準確度等級2和3.德文版本EN 13023-2003+A1-2010 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3; German version EN 13023:2003+A1:2010 |
| DIN EN 14366-2005 | 廢水裝置發出噪聲的實驗室測量 | Laboratory measurement of noise from waste water installations; German version EN 14366:2004 |
| DIN EN 14462-2010 | 表面處理設備. 包括其輔助操作裝置在內的表面處理設備的噪聲試驗規程. 精度等級2和3; 德文版本EN 14462: 2 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3; German version EN 14462:2005+A1:2009 |
| DIN EN 1501-4-2008 | 垃圾收集車及其相關提升裝置.一般要求和安全性要求.第4部分:垃圾收集車的噪聲試驗規范 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles; English version of DIN EN 1501-4:2008-01 |
| DIN EN 15036-1-2006 | 加熱鍋爐.熱產生器產生空氣噪聲的試驗規則.第1部分:熱產生器產生的空氣噪聲 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators; English version of DIN EN 15036-1:2006-12 |
| DIN EN 15036-2-2006 | 加熱鍋爐.熱產生器空氣噪聲發射的試驗規則.第2部分:熱產生器出口發出的燃?xì)庠肼? | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator; English version of DIN EN 15036-2:2006-12 |
| DIN EN 15610-2009 | 鐵路應用.噪聲排放.關于轉動噪聲產生的軌道粗糙度測量,DIN EN 15610:2009-08的英文版本 | Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation; English version of DIN EN 15610:2009-08 |
| DIN EN 27574-1-1989 | 聲學.測定和檢驗機器和設備規定噪聲排放值的統計方法.第1部分:一般考慮和定義:(等同采用 ISO 7574-1:1985); | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 1: general considerations and definitions; (identical with ISO 7574-1:1985); german version EN 27574-1:1988 |
| DIN EN 27574-2-1989 | 聲學.測定和檢驗機器和設備規定噪聲排放值的統計方法.第2部分:單機規定值方法:(等同采用 ISO 7574-2:1985); | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines; (identical with ISO 7574-2:1985); german version EN 27574-2:1988 |
| DIN EN 27574-3-1989 | 聲學.測定和檢驗機器和設備規定噪聲排放值的統計方法.第3部分:批量機器規定的簡易(過渡)方法:(等同采用 ISO | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 3: simple (transition) method for stated values for batches of machines; (identical with ISO 7574-3:1985); german version EN 27574-3:1988 |
| DIN EN 27574-4-1989 | 聲學.測定和檢驗機器和設備規定噪聲排放值的統計方法.第4部分:批量機器規定的簡易:(等同采用 ISO 7574-4:19 | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines; (identical with ISO 7574-4:1985); german version EN 27574-4:1988 |
| DIN EN 28960-1993 | 家用和類似用途冰箱、冷凍食品儲藏柜和食品冷凍柜.空氣噪聲測量 | Refrigerators, frozen food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991); German version EN 28960:1993 |
| DIN EN 29295-1991 | 聲學.計算機及商務設備發出的高頻率噪聲的測量(ISO 9295-89) | Acoustics; measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1989); german version EN 29295:1991 |
| DIN EN 301247-2003 | 數字蜂窩式電信系統(相位2).增強全速率語音通信信道的適度噪聲狀況 | Digital cellular telecommunications system (Phase 2) - Comfort noise aspects for Enhanced Full Rate (EFR) speech traffic channels (GSM 06.62 version 4.0.1) (Endorsement of the English version EN 301247 V 4.0.1 (1997-12) as German standard) |
| DIN EN 301705-2004 | 數字蜂窩式遠程通信系統(2+相位).自適應多速率(AMR)語音話務信道用丟失幀的替換和噪聲抑制 | Digital cellular telecommunications system (Phase 2+) - Substitution and muting of lost frames for Adaptive Multi Rate (AMR) speech traffic channels (GSM 06.91 version 7.1.1 Release 1998) (Endorsement of the English version EN 301705 V7.1.1 (2000-04) as German standard) |
| DIN EN 60034-9 Berichtigung 1-2008 | 旋轉電機.第9部分:噪聲極限(IEC 60034-9-2003、修改件 + A1-2007).勘誤表DIN EN 60034-9(VDE 0530-9)-2008- | Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified + A1:2007); German version EN 60034-9:2005 + A1:2007, Corrigenda to DIN EN 60034-9 (VDE 0530-9):2008-01 |
| DIN EN 60034-9-2008 | 旋轉電機.第9部分:噪聲極限值 | Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified + A1:2007); German version EN 60034-9:2005 + A1:2007 |
| DIN EN 60534-8-1-2006 | 工業過程控制閥.第8-1部分:噪聲的考慮.氣動流流經控制閥產生的噪聲的實驗室測量 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:2005); German version EN 60534-8-1:2005 |
| DIN EN 60534-8-2-1994 | 工業過程控制閥.第8部分:噪聲.第2節:控制閥液流噪聲的實驗室測量 | Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993 |
| DIN EN 60534-8-3-2001 | 工業過程控制閥.第8-3部分:噪聲.控制閥氣動噪聲預測法 | Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000 |
| DIN EN 60534-8-4-2006 | 工業過程控制閥.第8-4部分:噪聲考慮.氣流噪聲預測 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:2005 + Corrigendum 1:2006); German version EN 60534-8-4:2005 |
| DIN EN 60704-2-10-2005 | 家用和類似用途電器.測定空中傳播噪聲的試驗規范.第2-10部分:電爐灶、烤爐、爐架和微波爐及其任意組合的特 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these (IEC 60704-2-10:2004); German version EN 60704-2-10:2004 |
| DIN EN 60704-2-11-2000 | 家用和類似電氣裝置.測定空氣噪聲的試驗規范.第2-11部分:電動食品加工機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances (IEC 60704-2-11:1998); German version EN 60704-2-11:1999 |
| DIN EN 60704-2-3-2006 | 家用和類似用途電器.測定空中傳播的噪聲的試驗規程.第2-3部分:洗碗機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers (IEC 60704-2-3:2001 + A1:2005); German version EN 60704-2-3:2002 + A1:2005 |
| DIN EN 60704-2-4-2002 | 家用和類似用途電器.空中傳播噪聲測定的試驗規程.第2-4部分:洗衣機和離心式脫水機的特殊要求 (IEC 60704-2- | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors (IEC 60704-2-4:2001); German version EN 60704-2-4:2001 |
| DIN EN 60704-2-5-2006 | 家用和類似電器氣.測定空氣傳播噪聲的試驗規程.第2-5部分:儲熱式房間電加熱器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters (IEC 60704-2-5:2005); German version EN 60704-2-5:2005 |
| DIN EN 60704-2-6-2004 | 家用和類似用途的電器.空中傳播噪聲測定的試驗規范.第2-6部分:滾筒式干衣機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers (IEC 60704-2-6:2003, modified); German version EN 60704-2-6:2004 |
| DIN EN 60704-2-7-2000 | 家用及類似用途電器.空氣噪聲測定的試驗規程.第2部分:風扇的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for fans (IEC 60704-2-7:1997); German version EN 60704-2-7:1998 |
| DIN EN 60704-2-9-2004 | 家用和類似用途電器.測定空氣噪聲的試驗規程.第2-9部分:電動理發器具的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances (IEC 60704-2-9:2003); German version EN 60704-2-9:2003 |
| DIN EN 60749-16-2003 | 半導體器件.機械和氣候試驗方法.第16部分:粒子碰撞噪聲探測(PIND) | Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) (IEC 60749-16:2003); German version EN 60749-16:2003 |
| DIN EN 60835-3-4-1995 | 數字微波無線電發射系統設備測量方法.第3部分:衛星地面站測量.第4節:低噪聲放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations; section 4: Low noise amplifier (IEC 60835-3-4:1993); German version EN 60835-3-4:1995 |
| DIN EN 62150-4-2010 | 光學纖維有源元件和器件.試驗和測量方法.第4部分:采用時域光學探測系統的相對強度噪聲(IEC 62150-4-2009). | Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system (IEC 62150-4:2009); German version EN 62150-4:2010 |
| DIN EN 62333-1-2007 | 數字器件和設備用噪聲抑制片.第1部分:定義和一般性能 | Noise suppression sheet for digital devices and equipment - Part 1: Definitions and general properties (IEC 62333-1:2006); German version EN 62333-1:2006 |
| DIN EN 62333-2-2007 | 數字器件和設備用噪聲抑制片.第2部分:測量方法 | Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods (IEC 62333-2:2006); German version EN 62333-2:2006 |
| DIN EN 62333-3-2010 | 數字裝置和設備用噪聲抑制片.第3部分:噪聲抑制片參數的特征描述(IEC 62333-3-2010).德文版本EN 62333-3-201 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet (IEC 62333-3:2010); German version EN 62333-3:2010 |
| DIN EN ISO 11200-2010 | 聲學.機械和設備發射的噪聲.在工作位置和其他特定位置測發射聲壓級定基本標準導則(ISO 11200-1995,含Cor 1- | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997); German version EN ISO 11200:2009 |
| DIN EN ISO 11201-2010 | 聲學.機器和設備發射的噪聲.在一個反射平面上方可忽略環境校正條件下進行工作位置和其他指定位置的發射聲壓 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010); German version EN ISO 11201:2010 |
| DIN EN ISO 11202-2010 | 聲學.機器和設備發射的噪聲.應用近似環境修正法對工作站和其他指定位置發射聲壓級進行測定(ISO 11202-2010) | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010); German version EN ISO 11202:2010 |
| DIN EN ISO 11203-2010 | 聲學.機械裝置及設備發射的噪聲.根據聲功率級測定工作位置和其它指定位置的發射聲壓級(ISO 11203-1995).德 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN ISO 11203:2009 |
| DIN EN ISO 11204-2010 | 聲學.機器和設備發射的噪聲.應用精確環境校準在工作位置和其他指定位置的發射聲壓級測量(ISO 11204-2010). | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010); German version EN ISO 11204:2010 |
| DIN EN ISO 11688-1-2009 | 聲學.低噪聲機器和設備設計,推薦指南.第1部分:規劃(ISO/TR 11688-1:1995),德文版本 EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995); German version EN ISO 11688-1:2009 |
| DIN EN ISO 11688-2-2001 | 聲學.低噪聲機械和設備推薦設計慣例.第2部分:低噪聲設計的物理學說明 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000 |
| DIN EN ISO 11819-1-2002 | 聲學.路面對交通噪聲影響的測量.第1部分:車流統計法 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997); German version EN ISO 11819-1:2001 |
| DIN EN ISO 14163-1999 | 聲學.消音器控制噪聲指南 | Acoustics - Guidelines for noise control by silencers (ISO 14163:1998); German version EN ISO 14163:1998 |
| DIN EN ISO 14509-1-2009 | 小型船.動力娛樂船發出的氣載噪聲.第1部分:經過測量程序 | Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008); English version of DIN EN ISO 14509-1:2009-01 |
| DIN EN ISO 14509-2-2007 | 小型船舶.動力娛樂船排放空氣噪聲測定 | Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft (ISO 14509-2:2006); English version of DIN EN ISO 14509-2:2007-02 |
| DIN EN ISO 14509-3-2009 | 小艇.由機動游艇所發出空氣噪聲.第3部分:使用計算和測量規程評估噪聲(ISO 14509-3:2009),德文版本 EN ISO 1 | Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009); English version of DIN EN ISO 14509-3:2009-11 |
| DIN EN ISO 15667-2001 | 聲學.采用隔音罩和隔音室的噪聲控制指南 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000); German version EN ISO 15667:2000 |
| DIN EN ISO 15744-2008 | 手持非電動工具.噪聲測量代碼.工程法(2級) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002); English version of DIN EN ISO 15744:2008-11 |
| DIN EN ISO 1680-2000 | 聲學.測量旋轉電機發射的空氣噪聲的試驗規程 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); German version EN ISO 1680:1999 |
| DIN EN ISO 17201-1 Berichtigung 1-2009 | 聲學.射程內噪聲.第1部分:槍口炸震的測定(ISO 17201-1:2005),DIN EN ISO 17201-1:2005-11勘誤表,德文版本 E | Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005), Corrigendum to DIN EN ISO 17201-1:2005-11; German version EN ISO 17201-1:2005/AC:2009 |
| DIN EN ISO 17201-1-2005 | 聲學.射程內噪聲.第1部分:槍口炸震的測定 | Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005); English version of DIN EN ISO 17201-1 |
| DIN EN ISO 17201-2-2006 | 聲學.射程內噪聲.第2部分:通過計算發射噪音和槍口炸震的評定(ISO 17201-2:2006) | Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006); English version of DIN EN ISO 17201-2:2006-10 |
| DIN EN ISO 17201-3-2010 | 聲學. 射擊場的噪聲. 第3部分: 噪聲傳輸計算指南（ISO 17201-3: 2010）; 德文版本EN ISO 17201-3: 2010 | Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations (ISO 17201-3:2010); German version EN ISO 17201-3:2010 |
| DIN EN ISO 17201-4-2006 | 聲學.射程內噪聲.第4部分:發射噪音預報(ISO 17201-4:2006) | Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO 17201-4:2006); English version of DIN EN ISO 17201-4:2006-07 |
| DIN EN ISO 17201-5-2010 | 聲學. 射擊場噪聲. 第5部分: 噪聲管理（ISO 17201-5: 2010）; 德文版本EN ISO 17201-5: 2010 | Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010); German version EN ISO 17201-5:2010 |
| DIN EN ISO 17624-2005 | 聲學.利用聲屏蔽法對辦公室和工作間進行噪聲控制的指南 | Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO 17624:2004); German version EN ISO 17624:2004 |
| DIN EN ISO 2151-2009 | 聲學.壓縮機和真空泵的噪聲試驗規范.工程方法(2級) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004); English version of DIN EN ISO 2151:2009-01 |
| DIN EN ISO 22868-2009 | 林業機械.帶內燃機的便攜手持式機械的噪聲試驗規范.工程法(2級準確度) | Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005); English version of DIN EN ISO 22868:2009-01 |
| DIN EN ISO 2922-2001 | 聲學.內河航道和港灣船舶氣載噪聲測量 | Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000); German version EN ISO 2922:2000 |
| DIN EN ISO 3095-2005 | 鐵路設施.聲學.有軌車輛發出噪聲的測量 | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO 3095:2005); English version of DIN EN ISO 3095 |
| DIN EN ISO 3740-2001 | 聲學.噪聲源聲功率級測定.基礎標準使用指南 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000); German version EN ISO 3740:2000 |
| DIN EN ISO 3743-2-2009 | 聲學.聲壓法測定噪聲源聲功率級.混響聲場中小型可移動聲源的工程檢測法.第2部分:專用混響試驗室法(ISO 3743 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994); English version of DIN EN ISO 3743-2:2009-11 |
| DIN EN ISO 3744-2011 | 聲學.聲壓法測定噪聲源的聲功率級.反射面上近似自由場的工程法(ISO 3744-2010).德文版本EN ISO 3744-2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010); German version EN ISO 3744:2010 |
| DIN EN ISO 3745-2009 | 聲學,噪聲源聲功率級的測定.消聲室和半聲室精密測定(ISO 3745:2003),德文版本 EN ISO 3745:2009 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms (ISO 3745:2003); English version of DIN EN ISO 3745:2009-11 |
| DIN EN ISO 3822-3-2010 | 聲學.供水設施的裝置和設備發射的噪聲的實驗室測試.第3部分:管線閥門和管件的安裝和工作條件(ISO 3822-3-19 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997 + Amd 1:2009); German version EN ISO 3822-3:1997 + A1:2009 |
| DIN EN ISO 389-4-1999 | 聲學.音響設備校正零點參考基準.第4部分:窄帶遮敝噪聲用參考聲級 | Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994); German version EN ISO 389-4:1998 |
| DIN EN ISO 4871-2009 | 聲學.機器和設備噪聲發射值的標示和驗證(ISO 4871:1996),德文版本 EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996); English version of DIN EN ISO 4871:2009-11 |
| DIN EN ISO 7235-2010 | 聲學.管道消音器和空氣界面裝置的實驗室測量規程.插入損失、流動噪聲和總壓損失(ISO 7235-2003).德文版本EN | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2009 |
| DIN EN ISO 9612-2009 | 聲學.職業性噪聲暴露的測定.工程法(ISO 9612-2009).英文版本DIN EN ISO 9612-2009-09 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009); English version of DIN EN ISO 9612:2009-09 |
| DIN EN ISO 9614-1-2009 | 聲學.聲壓法測定噪聲源聲功率級使用聲音強度法,第1部分:離散點測試(ISO 9614-1:1993),德文版本 EN ISO 9614 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993); English version of DIN EN ISO 9614-1:2009-11 |
| DIN EN ISO 9614-2-1996 | 聲學.利用聲音強度測定噪聲源功率級.第2部分:掃描測量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996); German version EN ISO 9614-2:1996 |
| DIN EN ISO 9614-3-2009 | 聲學,聲強法測定噪聲源的聲功率級,第3部分:掃描測量法(ISO 9614-3:2002),EN ISO 9614-3:2009的德文版本 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002); German version EN ISO 9614-3:2009 |
| DIN EN ISO 9902-1-2009 | 紡織機械.噪聲測試標準.第1部分:通用標準(ISO 9902-1:2001 + 修改件1:2009),德文版本EN ISO 9902-1:2001 + | Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001 + Amd 1:2009); German version EN ISO 9902-1:2001 + A1:2009 |
| DIN EN ISO 9902-2-2009 | 紡織機械.噪聲測試標準.第2部分:紡前預處理機械和紡紗機械 (ISO 9902-2:2001 + 修該件1:2009);德文版本EN I | Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001 + Amd 1:2009); German version EN ISO 9902-2:2001 + A1:2009 |
| DIN EN ISO 9902-3-2009 | 紡織機械.噪聲測試標準.第3部分:無紡機械(ISO 9902-3:2001+修改件 1:2009),德文版本EN ISO 9902-3:2001 + A | Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001 + Amd 1:2009); German version EN ISO 9902-3:2001 + A1:2009 |
| DIN EN ISO 9902-4-2009 | 紡織機械.噪聲測試標準.第4部分:紗線加工,繩索加工機械(ISO 9902-4:2001+修改件1:2009),德文版本EN ISO 990 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001 + Amd 1:2009); German version EN ISO 9902-4:2001 + A1:2009 |
| DIN EN ISO 9902-5-2009 | 紡織機械.噪聲測試標準.第5部分:織造和針織用機械(ISO 9902-5:2001 + 修改件1:2009),德文版本EN ISO 9902-5 | Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001 + Amd 1:2009); German version EN ISO 9902-5:2001 + A1:2009 |
| DIN EN ISO 9902-6-2009 | 紡織機械.噪聲測試標準.第6部分:織造機械(ISO 9902-6:2001+修改件1:2009),修改件EN ISO 9902-6:2001 + A1:2 | Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001 + Amd 1:2009); German version EN ISO 9902-6:2001 + A1:2009) |
| DIN ETS 300580-3-2001 | 數字移動電話遠程通信系統(階段2).全價話務.第3部分:全價話務通道損失范圍的替換和噪聲抑制 (英文版本核準 | Digital cellular telecommunications system (Phase 2) - Full rate speech - Part 3: Substitution and muting of lost frames for full rate speech channels (Endorsement of the English version ETS 300580-3:1998-03 as German standard) |
| DIN ETS 300580-4-1995 | 歐洲數字移動電話遠程通信系統(階段2).第4部分:全價話務通道用噪聲緩解特性; 英文版本 ETS 300580-4:1994 | European digital cellular telecommunications system (Phase 2) - Part 4: Comfort noise aspects for full rate speech traffic channels; English version ETS 300580-4:1994 |
| DIN ETS 300581-3-1996 | 歐洲數字移動電話遠程通信系統.半價話務.第3部分:半價話務通道用損失范圍的替換和噪聲抑制; 英文版本 ETS 3 | European digital cellular telecommunications system - Half rate speech - Part 3: Substitution and muting of lost frames for half rate speech traffic channels; English version ETS 300581-3:1995 |
| DIN ETS 300581-4-1996 | 歐洲數字移動電話遠程通信系統.半價話務.第4部分:半價話務通道用噪聲緩解特性; 英文版本 ETS 300581-4:1995 | European digital cellular telecommunications system - Half rate speech - Part 4: Comfort noise aspects for the half rate speech traffic channel; English version ETS 300581-4:1995 |
| DIN ETS 300753-1998 | 設備工程.電信設備產生的噪聲 | Equipment Engineering (EE) - Acoustic noise emitted by telecommunications equipment; English version ETS 300753:1997 |
| DIN IEC 60510-1-5-1991 | 衛星地面站無線電設備測量方法.第1部分:分系統和分系統組合件通用測量.第5節:噪聲溫度測量 | Methods of measurement for radio equipment used in satellite earth stations; measurement common to sub-systems and combinations of sub-systems; noise temperature measurements; identical with IEC 60510-1-5:1988 |
| DIN IEC 60510-2-3-1993 | 衛星地面站無線電設備的測量方法.分系統測量.低噪聲放大器 | Methods of measurement for radio equipment used in satellite earth-stations; measurement for sub-systems; low-noise amplifier; identical with IEC 60510-2-3:1989 |
| DIN IEC 60883-1989 | 錄象帶色度信號與隨機噪聲之比的測定方法 | Measuring method for chrominance signal-to-random noise ratio for video tape recorders; identical with IEC 60883:1987 |
| DIN ISO 2923-2003 | 聲學.船艙噪聲測量 | Acoustics - Measurement of noise on board vessels (ISO 2923:1996 + Corrigendum 1:1997) |
| DIN ISO 362-1-2009 | 道路車輛加速產生的噪聲測量.工程學方法.第1部分:M和N類 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories (ISO 362-1:2007 + Cor. 1:2009) |
| DIN ISO 5130-2008 | 聲學.固定機動車輛產生的噪聲聲壓級的測量 | Acoustics - Measurements of sound pressure level emitted by stationary road vehicles (ISO 5130:2007);English version of DIN ISO 5130:2008-06 |
| DIN VDE 0873 Bb.3-1991 | 架空電力線和高壓設備的無線電干擾特性.第3部分:使無線電噪聲產生減小到最低程度的實施規程.與CISPR 18-3:1 | Radio interference characteristics of overhead power lines and high-voltage equipment; part 3: code of practice for minimizing the generation of radio noise; identical with CISPR 18-3:1986 |
| DIN-Fachbericht 72-1998 | 汽車附加傳動裝置用電動機噪聲質量的錄入與文獻加工 | () |
| 編號 | 中文名稱 | 英文名稱 |