| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 12053-2001 | 工業卡車的安全 噪聲發射測量的試驗方法 | Safety of industrial trucks - Test methods for measuring noise emissions |
| EN 12545-2000 | 鞋類、皮革和人造革制品的加工機械 噪聲試驗規則 通用要求 | Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
| EN 12549-1999 | 聲學 緊固件驅動工具的噪聲試驗規則 工程法 | Acoustics - Noise test code for fastener driving tools - Engineering method |
| EN 12736-2001 | 電動道路車輛 用車載充電器充電過程中車輛的在空中噪聲 聲功率級的測定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
| EN 13023-2003 | 印刷、紙張吹煉、造紙機械及附屬設備的噪聲測量法 2類和3類準確度 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy categories 2 and 3 |
| EN 1547-2001 | 工業熱處理設備 工業熱處理設備及輔助設備的噪聲試驗規則 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| EN 1746-1998 | 機械安全 安全標準的噪聲條款編寫指南 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| EN 1793-1-1997 | 道路交通噪聲減低裝置 測定聲學性能的試驗方法 第1部分：聲音吸收的本征特性 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption |
| EN 1793-2-1997 | 道路交通噪聲減低裝置 聲學性能測定的試驗方法 第2部分：氣載聲音絕緣的固有特性 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation |
| EN 1793-3-1997 | 道路交通噪聲減低裝置 聲學性能測定的試驗方法 第3部分：標準化交通噪聲頻譜 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
| EN 1794-1-2003 | 道路交通噪聲降低裝置 非聲學性能 第1部分：機械性能和穩定性要求 | Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements |
| EN 1794-2-2003 | 道路交通噪聲降低裝置 非聲學性能 第2部分：一般安全和環境要求 | Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements |
| EN 27574-1-1988 | 聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第1部分：一般考慮和定義 | Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 1: General considerations and definitions (ISO 7574-1:1985) |
| EN 27574-2-1988 | 聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第2部分：用于單個機械的方法 | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines (ISO 7574-2:1985) |
| EN 27574-3-1988 | 聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第3部分：用于機組的簡易（傳遞）法 | Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985) |
| EN 27574-4-1988 | 聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第4部分：用于機組的方法 | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985) |
| EN 28960-1993 | 冷藏箱 家用和類似用途冷凍食品儲藏柜和食品冷凍柜空氣噪聲的測量 | Refrigerators, frozen-food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991) |
| EN 29295-1991 | 聲學 計算機和辦公室設備噪聲發射的高頻噪聲的測量 | Acoustics; Measurement of high-frequency noise emitted by computer and business equipment (identical with ISO 9295:1988) |
| EN 352-5-2002 | 聽力保護器 安全要求和測試 第5部分：主動噪聲降低耳套 | Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs |
| EN 60034-9-1997 | 旋轉電機 第9部分：噪聲限值 | Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:1997) |
| EN 60534-8-1-2000 | 工業過程控制閥 第8部分：噪聲的考慮 第1節：氣動流流徑控制閥產生的噪聲的實驗室測量 | Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986) |
| EN 60534-8-2-1993 | 工業過程控制閥 第8部分 噪聲考慮 第2節通過控制閥的流體產生的噪聲的實驗室測量報法 | Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991) |
| EN 60534-8-3-2000 | 工業流程控制閥 .第8-3部分 噪聲問題 通過控制閥的動力噪聲預測法 | Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000) |
| EN 60534-8-4-1994 | 工業過程控制閥 第8部分：噪聲問題 第4節：流動產生的噪聲的預測 | Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994) |
| EN 60704-1-1997 | 家用和類似用途電器 測定空中傳播噪聲的試驗規范 第1部分：一般要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements (IEC 60704-1:1997) |
| EN 60704-2-1-2001 | 測定家用和類似電器發出的空氣傳播的噪聲的試驗規則 第2-1部分：真空吸塵器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners (IEC 60704-2-1:2000) / Note: Applies only in conjunction with EN 60704-1 (1997) |
| EN 60704-2-11-1999 | 測定家用和類似用途電器輻射氣載噪聲的試驗規范 第2－11部分：電動食品加工機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances (IEC 60704-2-11:1998) |
| EN 60704-2-13-2000 | 家用和類似用途電器 測定空中傳播噪聲的試驗規范 第2－13部分：排油煙機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods (IEC 60704-2-13:2000) |
| EN 60704-2-2-1994 | 測定家用和類似電器發出的空氣傳播的噪聲的試驗規范 第２－２部分：強制對電流加熱器的特殊要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2-2: Particular requirements for forced draught convection heaters (IEC 60704-2-2:1985) |
| EN 60704-2-3-2002 | 測定家用和類似用途電器輻射氣載噪聲的試驗規范 第2－3部分：洗碗機特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers (IEC 60704-2-3:2001) |
| EN 60704-2-4-2001 | 測定家用和類似用途電器輻射氣載噪聲的試驗規范 第2－4部分：洗衣機和離心式脫水機的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors (IEC 60704-2-4:2001) / Note: Applies only in conjunction with EN 60704 |
| EN 60704-2-5-1994 | 測定家用和類似用途電器具輻射噪聲的試驗規范 第２－５部分：儲熱式房間電暖器的特殊要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2-5: Particular requirements for room heaters of the storage type (IEC 60704-2-5:1989) |
| EN 60704-2-6-1995 | 測定家用和類似用途電器輻射氣載噪聲的試驗規范 第2－6部分：滾筒式干衣機的特殊要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2: Particular requirements for tumble-dryers (IEC 60704-2-6:1994) |
| EN 60704-2-7-1998 | 測定家用和類似用途電器輻射氣載噪聲的試驗規范 第2－7部分：電風扇的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans (IEC 60704-2-7:1997) |
| EN 60704-2-8-1997 | 家用及類似用途電氣裝置發出空氣噪聲測定的試驗規范 第2－8部分：電動剃須刀的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers (IEC 60704-2-8:1997) |
| EN 60704-2-9-2003 | 家用和類似用途電器 測定噪聲的試驗方法 第2-9部分：電護發器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances (IEC 60704-2-9:2003) / Note: Endorsement notice |
| EN 60704-3-1994 | 家用和類似用途電器輻射氣載噪聲的測定用試驗規范 第3部分：測量和檢驗宣稱噪聲發出值的規程 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 3: Procedure for determining and verifying declared noise emission values (IEC 60704-3:1992) |
| EN 60749-16-2003 | 半導體器件 機械和氣候試驗方法 第16部分：粒子碰撞噪聲檢測 | Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) (IEC 60749-16:2003) / Note: Endorsement notice |
| EN 60835-3-4-1995 | 數字微波無線電發射系統使用設備的測量方法 第3部分：衛星地面站的測量 第4節：低噪聲放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 4: Low noise amplifier (IEC 60835-3-4:1993) |
| EN 61265-1995 | 電聲學 航空噪聲測量儀器 在運輸機噪聲鑒定中測量三分之一寬帶倍頻聲壓級裝置的性能要求 | Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes (IEC 61265:1995) |
| EN 61280-2-9-2002 | 光纖通信子系統試驗程序 第2-9部分：數字系統 稠密波長分割度多路系統光學信號-噪聲系數測量 | Fibre optic communication subsystem test procedures - Part 2-9: Digital systems; Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems (IEC 61280-2-9:2002) / Note: Endorsement notice |
| EN 61290-3-2-2003 | 光學放大器 第3-2部分：噪聲數字參數的試驗方法 電光譜分析儀法 | Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method (IEC 61290-3-2:2003) / Note: Endorsement notice*Applies only in conjunction with EN 61290-3 and EN 61291-1 |
| EN ISO 11200-1995+AC-1997 | 聲學 機器和設備發射的噪聲 工作位置和其他指定位置發射聲壓級的測量的基本標準的使用導則 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995) |
| EN ISO 11201-1995+AC-1997 | 聲學 機器和設備發射的噪聲 工作位置和其他指定位置發射聲壓級的測量 一個反射面上方近似自由場的工程法 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) |
| EN ISO 11202-1995+AC-1997 | 聲學 機器和設備發射的噪聲 工作位置和其他指定位置發射聲壓級的測量 現場簡易法 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995) |
| EN ISO 11203-1995 | 聲學 機器和設備發射的噪聲 從聲功率級測定工作位置和其他指定位置發射聲壓級 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| EN ISO 11204-1995+AC-1997 | 聲學 機器和設備發射的噪聲 工作位置和其他指定位置發射聲壓級的測量 要求作環境校準的方法 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995) |
| EN ISO 11688-1-1998+AC-1998 | 聲學 低噪聲機器和設備設計的推薦實用規程 第1部分：計劃 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN ISO 11688-2-2000 | 聲學 低噪聲機器和設備設計的推薦實用規程 第2部分：低噪聲設計的物理工程說明 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN ISO 11689-1996 | 聲學 機器和設備發射噪聲數據的比較方法 | Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996) |
| EN ISO 11690-1-1996 | 聲學 低噪聲機器工作間設計的推薦實用規程 第1部分：噪聲控制策略 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
| EN ISO 11690-2-1996 | 聲學 低噪聲機器工作間設計的推薦實用規程 第2部分：噪聲控制措施 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996) |
| EN ISO 11690-3-1998 | 聲學 低噪聲機器工作間設計的推薦實用規程 第3部分：工作室中的聲傳播和噪聲預測 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997) |
| EN ISO 11819-1-2001 | 聲學 路面對交通噪聲影響的測量 第1部分：統計旁路法 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997) |
| EN ISO 11904-1-2002 | 聲學 耳朵接收到的來自封閉噪聲源的噪聲量的測定 第1部分：真耳中使用拾音器的技術(MIRE技術) | Acoustics - Determination of sound immissions from sound sources placed closed to the ear - Part 1: Technique using a microphone in real ear (MIRE-technique) (ISO 11904-1:2002) |
| EN ISO 12001-1996+AC-1997 | 聲學 機器和設備發射的噪聲 噪聲試驗規程的介紹和起草規則 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN ISO 140-8-1997 | 聲學 建筑物和建筑構件的隔聲測量 第8部分：重型標準地板上敷設面層使傳遞的撞擊噪聲減低的實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997) |
| EN ISO 14163-1998 | 聲學 采用消聲器的噪聲控制指南 | Acoustics - Guidelines for noise control by silencers (ISO 14163:1998) |
| EN ISO 14509-2000 | 小艇 由機動游艇所發出空氣噪聲的測定 | Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000) |
| EN ISO 15667-2000 | 聲學 采用隔聲罩和隔聲小室的噪聲控制指南 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| EN ISO 15744-2002 | 手持非電動工具 噪聲測量規則 工程法(2級) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
| EN ISO 3740-2000 | 聲學 噪聲源的聲功率級的測定 基本標準使用導則 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000) |
| EN ISO 3741-1999 | 聲學 聲壓法測定噪聲源的聲功率級 混響室精密法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999) |
| EN ISO 3743-1-1995 | 聲學 噪聲源的聲功率級的測定 混響聲場中小型可移動聲源的工程法 第1部分：硬壁試驗室中的比較法 | Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) |
| EN ISO 3743-2-1996 | 聲學 噪聲源的聲功率級的測定 混響聲場中小型可移動聲源的工程法 第2部分：專用混響試驗室法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| EN ISO 3744-1995 | 聲學 聲壓法測定噪聲源的聲功率級 一個反射面上方近似自由場中的工程法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) |
| EN ISO 3746-1995 | 聲學 聲壓法測定噪聲源的聲功率級 采用包絡測面積的簡易法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) |
| EN ISO 3747-2000 | 聲學 聲壓法測定噪聲源的聲功率級 現場比較法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000) |
| EN ISO 389-4-1998 | 聲學 校正聽力設備的基準零級 第4部分：窄帶掩蔽噪聲基準級 | Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994) |
| EN ISO 4871-1996 | 聲學 機器和設備噪聲輻射值的確定和檢測 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN ISO 5135-1998 | 聲學 在混響室中測定空調終端設備、空調終端單元、阻尼器和調節閥門的噪聲功率級 | Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
| EN ISO 7235-2003 | 聲學 管道消音器和氣端裝置的實驗室測量步驟 插入損失、流動噪聲和總壓損失 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| EN ISO 7779-2001+A1-2003 | 聲學 信息技術和遠程通訊設備發射的空氣噪聲的測量 | Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:1999) |
| EN ISO 9614-1-1995 | 聲學 聲強法測定噪聲源聲功率級 第1部分：離散點測量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN ISO 9614-2-1996 | 聲學 聲強法測定噪聲源聲功率級 第2部分：掃描測量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN ISO 9614-3-2002 | 聲學 聲強法測定噪聲源聲功率級 第3部分：掃描測量的精確方法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| EN ISO 9902-1-2001 | 紡織機械 噪聲試驗規范 第1部分：通用要求 | Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) |
| EN ISO 9902-2-2001 | 紡織機械 噪聲試驗規范 第2部分：紡紗準備機和紡紗機械 | Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
| EN ISO 9902-3-2001 | 紡織機械 噪聲試驗規范 第3部分：無紡機械 | Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) |
| EN ISO 9902-4-2001 | 紡織機械 噪聲試驗規范 第4部分：紗線加工機和制繩機 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-3:2001) |
| EN ISO 9902-5-2001 | 紡織機械 噪聲試驗規范 第5部分：編織和針織準備機 | Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
| EN ISO 9902-6-2001 | 紡織機械 噪聲試驗規范 第6部分：織物制造機 | Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
| EN ISO 9902-7-2001 | 紡織機械 噪聲試驗規范 第7部分：印染機及精整機 | Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
| IEEE 473-1985 | 電磁現場測量(10kHz-10GHz)無線電噪聲的推薦規程 | (Recommended practice for an electromagnetic site survey (10 kHz to 10 Ghz)) |
| prEN 12076-1995 | 壓縮機和真空汞的噪聲發射的測量（工程法） | Measurement of noise emission from compressors and vacuum pumps (engineering method) |
| prEN 12366-1996 | 聲學 手持式非電動工具噪聲測試規程 工程法（二級） | Acoustics - Noise test code for hand-held non-electric power tools - Engineering method (grade 2) |
| prEN 14366-2002 | 廢水裝置噪聲的實驗室的測量 | Laboratory measurement of noise from waste water installations |
| prEN 14462-2002 | 表面處理設備 表面處理設備包含它的輔助處理設備的噪聲試驗規范 2和3級精確度 | Surface teatment equipment - Noise test code for surface treatment equipment including its ancilliary handling equipment - Accuracy grades 2 and 3 |
| prEN 1915-4-2002 | 航行器的地面支撐設備 一般要求 第4部分：噪聲測量方法 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods |
| prEN 55021-1999 | CISPR 21：脈沖噪聲對移動無線電通信的騷擾 評定其性能暫降的方法和提高性能的措施 | CISPR 21: Interference to mobile radiocommunications in the presence of impulsive noise - Methods of judging degradation and measures to improve performance |
| prEN 60704-2-6-2003 | 測定家用和類似用途電器輻射氣載噪聲的試驗規范 第2－6部分：滾筒式干衣機的特殊要求 草案 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers (IEC 60704-2-6:2003, modified) / Note: Intended as replacement for EN 60704-2-6 (1995-01). |
| prEN 61280-3-2-1998 | 光纖通信子系統基本試驗程序 第3-2部分：模擬系統試驗程序 視頻系統的載波-噪聲系數測量 | IEC 61280-3-2: Fibre optic communication subsystem basic test procedures - Part 3-2: Test procedures for analogue systems - Carrier-to-noise ratio measurements for video systems |
| prEN 61280-3-4-1998 | 光纖通信子系統基本試驗程序 第3-4部分：模擬系統試驗程序 視頻系統用合成三重差拍次噪聲測量 | IEC 61280-3-4: Fibre optic communication subsystem basic test procedures - Part 3-4: Test procedures for analogue systems - Composite triple-beat noise measurement for video systems |
| prEN ISO 10052-2000 | 聲學 空中噪聲和碰撞聲隔音及設備噪聲的現場測量 測量法 | Acoustics - Field measurements of airborne and impact sound insulation and of equipment sound - Survey method (ISO/DIS 10052:2000) |
| prEN ISO 10848-1-1999 | 聲學 毗連房間之間沖擊噪聲和空氣中噪聲沿側面?zhèn)鬟f的實驗測量 第1部分：框架文件 | Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 1: Frame document |
| prEN ISO 10848-2-2001 | 聲學 毗連房間之間沖擊噪聲和空氣中噪聲沿側面?zhèn)鬟f的實驗測量 第2部分：接合處有小影響的輕質元件的應用 | Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 2: Application to light elements when the junction has a small influence (ISO/DIS 10848-2:2001) |
| prEN ISO 10848-3-2001 | 聲學 毗連房間之間沖擊噪聲和空氣中噪聲沿側面?zhèn)鬟f的實驗測量 第3部分：接合處有實質性影響的輕質元件的 | Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence (ISO/DIS 10848-3:2001) |
| prEN ISO 11205-2003 | 聲學 機器和設備發出的噪聲 用聲強法測定工作現場和其它特定位置發出的噪聲聲壓級用 工程法 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO/FDIS 11205:2003) |
| prEN ISO 11904-2-2001 | 聲學 耳朵接收到的來自封閉噪聲源的噪聲量的測定 第2部分：使用人體模型技術(人體模型技術) | Acoustics - Determination of sound immissions from sound sources placed closed to the ear - Part 2: Technique using a manikin (manikin-technique) (ISO/DIS 11904-2:2001) |
| prEN ISO 17624-2001 | 聲學 用聲屏法控制辦公室及工作間噪聲的指南 | Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO/DIS 17624:2001) |
| prEN ISO 3095-2001 | 鐵路應用 聲學 有軌車輛發射的噪聲的測量 | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO/DIS 3095:2001) |
| prEN ISO 3745-2003 | 聲學 聲壓法測定噪聲源的聲功率級 消聲室和半消聲室精密法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms (ISO/FDIS 3745:2003) |
| prHD 53.9 S2-1992 | 旋轉電機 第9部分：噪聲限值 | Rotating electrical machines; part 9: noise limits (IEC 60034-9:1990, modified) |
| 編號 | 中文名稱 | 英文名稱 |