| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI B18.2.4.4M-1982
| 米制六角法蘭螺母
| Nuts, Metric Hex Flange
|
| ANSI/ASME B107.12-2004
| 螺母旋具(旋轉型旋具夾緊器)(英制)
| Nut Drivers (Spin Type, Screwdriver Grip) (Inch Series)
|
| ANSI/ASME B107.40-2002
| 喇叭式螺母扳手(英制和米制系列)
| Flare Nut Wrenches (Inch and Metric Series)
|
| ANSI/ASME B107.9-2002
| 盒式、開端式、組合式和喇叭式螺母扳手(米制系列)
| Wrenches, Box, Open End, Combination, and Flare Nut (Metric Series)
|
| ANSI/ASME B107.9M-1994
| 套筒、開口端組合扳手和錐形螺母(米制系列)
| Wrenches, Box, Open End, Combination, and Flare Nut (Metric Series)
|
| ANSI/ASME B18.10-2006
| 軌道螺栓及螺母
| Track Bolt and Nuts
|
| ANSI/ASME B18.16M-2004
| 經常作用的扭矩型鋼制米制六角螺母和六角法蘭螺母
| Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts
|
| ANSI/ASME B18.2.2-1987
| 英制系列四角和六角螺母
| Square and Hex Nuts (Inch Series)
|
| ANSI/ASME B18.2.4.1M-2002
| 1型米制六角螺母
| Metric Hex Nuts, Style 1
|
| ANSI/ASME B18.2.4.2M-2005
| 六角型螺母,2型,米制
| Hex Nuts, Style 2, Metric
|
| ANSI/ASME B18.2.4.3M-1979
| 米制有槽六角形型螺母
| Hex Nuts, Slotted, Metric
|
| ANSI/ASME B18.2.4.5M-1979
| 六角卡住螺母,米制
| Hex Jam Nuts, Metric
|
| ANSI/ASME B18.2.4.6M-1979
| 重型六角螺母,米制
| Hex Nuts, Heavy, Metric
|
| ANSI/ASME B18.6.3-2003
| 有槽和凹槽頭機器螺釘和機器螺母
| Slotted and Recessed Head Machine Screws and Machine Screw Nuts
|
| ANSI/ASME B5.1M-1985
| T型槽.T型槽螺栓、螺母和榫舌
| T-Slots - Their Bolts, Nuts, and Tongues
|
| ANSI/ASTM A194/A 194M-2001
| 高壓和高溫設備用碳素鋼與合金鋼螺栓和螺母規范
| Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service
|
| ANSI/IEEE C135.1-1999
| 架空線結構用鍍鋅鋼螺栓和螺母標準
| Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
|
| ANSI/IEEE C135.2-1999
| 架空線結構用加螺紋鍍鋅鐵絞線孔眼緊固桿和螺母標準
| Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction
|
| ANSI/SAE J122-1998
| 螺母表面不連續性
| Surface Discontinuities on Nuts
|
| ANSI/SAE J123-1994
| 螺栓、螺紋、螺母表面斷續疲勞試驗
| Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
|
| ANSI/SAE J1965-1997
| 道路車輛.商用車輛和多用途載客車輛用車輪.固定螺母.試驗方法
| Road Vehicles - Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles - Fixing Nuts - Test Methods
|
| ANSI/SAE J2295-1998
| 緊固件.零件標準帽螺釘、六角頭螺栓和六角螺母
| Fasteners - Part Standard Cap Screws, Hex Bolts, and Hex Nuts
|
| ANSI/SAE J2315-1998
| 輪螺母座強度
| Wheel Nut Seat Strength
|
| ANSI/SAE J2316-1998
| 乘用車和輕型卡車輪螺母座系統試驗程序和性能要求
| Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks
|
| ANSI/SAE J238-1998
| 螺母和錐形彈簧墊圈配件
| Nut and Conical Spring Washer Assemblies
|
| ANSI/SAE J482-1998
| 六角高螺母
| Hexagon High Nuts
|
| ANSI/SAE J483-1998
| 槽頂(盲孔、帽形)螺母
| Crown (Blind, Acorn) Nuts
|
| ANSI/SAE J485-1998
| 扁銷用螺栓孔與螺母螺桿尾和槽
| Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins
|
| ANSI/SAE J891-1998
| 彈簧螺母
| Spring Nuts
|
| ASME B107.35M-1997
| 螺母旋具動器(旋轉型旋具)(米制系列)
| (Nut drivers (spin type, screwdriver grip) (Metric series))
|
| ASME B107.6-1994
| 組合開端套筒扳手和聯接螺母(英制系列)
| (Wrenches, box, angled, open end, combination, flare nut, and tappet (Inch series))
|
| ASME B107.9M Errata-1996
| 錐形螺母和螺桿組合成的開口斜角開口扳手.勘誤
| (Wrenches, box, angled, open end, combination, flare nut and tappet (Metric series); Errata)
|
| ASME B16.14-1991
| 帶有管螺紋的鐵管塞、管套、鎖緊螺母
| (Ferrous pipe plugs, bushings, and locknuts with pipe threads)
|
| ASME B18.10-1982
| 道軌用螺栓和螺母
| (Track bolts and nuts)
|
| ASME B18.16.1M Errata-1979
| 有效力矩型米制鋼六角螺母和六角法蘭螺母機械和性能要求.勘誤表
| (Mechanical and performance requirements for prevailing-torque type steel metric hex nuts and hex flange nuts; Errata)
|
| ASME B18.16.1M-1979
| 有效力矩型米制鋼六角螺母和六角法蘭螺母的機械和性能要求
| (Mechanical and performance requirements for prevailing-torque type steel metric hex nuts and hex flange nuts)
|
| ASME B18.16.2M-1979
| 有效力矩型米制鋼六角螺母和六角法蘭螺母的轉矩應力試驗要求
| (Torque-tension test requirements for prevailing-torque type steel metric hex nuts and hex flange nuts)
|
| ASME B18.16.3M-1998
| 有效力矩型米制鋼六角螺母和六角法蘭螺母的尺寸要求
| (Dimensional requirements for prevailing-torque type steel metric hex nuts and hex flange nuts)
|
| ASME B18.2.2-1987
| 英制四角和六角形螺母
| (Square and hex nuts (Inch series))
|
| ASME B18.2.4.1M-2002
| 米制1型六角螺母
| (Metric hex nuts, style 1)
|
| ASME B18.2.4.2M Errata-1982
| 米制2型六角螺母,正誤表
| (Metric hex nuts, style 2; Errata)
|
| ASME B18.2.4.2M-1979
| 米制2型六角螺母
| (Metric hex nuts, style 2)
|
| ASME B18.2.4.3M Errata-1981
| 米制六角頭開槽螺母,正誤表
| (Metric slotted hex nuts; Errata)
|
| ASME B18.2.4.3M-1979
| 米制六角開槽螺母
| (Metric slotted hex nuts)
|
| ASME B18.2.4.4M-1982
| 米制六角法蘭螺母
| (Metric hex flange nuts)
|
| ASME B18.2.4.5M Errata-1981
| 米制六角頭鎖緊螺母,正誤表
| (Metric hex jam nuts; Errata)
|
| ASME B18.2.4.5M-1979
| 米制六角頭鎖緊螺母
| (Metric hex jam nuts)
|
| ASME B18.2.4.6M Errata-1981
| 米制重型六角頭螺母正誤表
| (Metric heavy hex nuts; Errata)
|
| ASME B18.2.4.6M-1979
| 米制重型六角螺母
| (Metric heavy hex nuts)
|
| ASME B5.1M-1985
| T型槽及其螺栓.螺母和榫舌
| (T-slots, their bolts, nuts, and tongues)
|
| ASTM A 183-2003
| 碳素鋼制軌條螺栓和螺母的標準規范
| Standard Specification for Carbon Steel Track Bolts and Nuts
|
| ASTM A 194/A 194Ma-2007
| 高壓或高溫設備或高壓高溫設備的螺栓用碳素鋼與合金鋼螺母的標準規范
| Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
|
| ASTM A 563-2007
| 碳和合金鋼螺母標準規范
| Standard Specification for Carbons and Alloy Steel Nuts
|
| ASTM A 563M-2006
| 碳素鋼和合金鋼螺母(米制)用標準規范
| Standard Specification for Carbon and Alloy Steel Nuts (Metric)
|
| ASTM F 1852-2005
| 120/105KSI最小抗張強度的熱處理鋼制"擰松式"張力控制結構螺栓/螺母/墊圈配件的標準規范
| Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength |
| ASTM F 2280-2006
| 150ksi最低拉伸強度的熱螺紋鋼制"扭開"型拉伸控制結構螺栓/螺母/襯墊組件的標準規范
| Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
|
| ASTM F 2328-2005
| 淬火和回火的螺紋鋼螺栓、螺母和螺柱的脫碳和滲碳性測定的標準試驗方法
| Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
|
| ASTM F 2329-2005
| 碳鋼和合金鋼螺栓、螺釘、墊圈、螺母和特殊螺紋緊固件用熱浸鍍鋅覆層的標準規范
| Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
|
| ASTM F 467a-2006
| 一般用途有色金屬螺母用標準規范
| Standard Specification for Nonferrous Nuts for General Use
|
| ASTM F 467Ma-2006
| 一般用途有色金屬螺母標準規范(米制)
| Standard Specification for Nonferrous Nuts for General Use [Metric]
|
| ASTM F 594-2002
| 不銹鋼螺母標準規范
| Standard Specification for Stainless Steel Nuts
|
| ASTM F 812/F 812M-2003
| 英制和米制系列螺母的表面不均勻性用標準規范
| Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
|
| ASTM F 836M-2002
| 1型不銹鋼米制螺母標準規范
| Standard Specification for Style 1 Stainless Steel Metric Nuts
|
| ASTM F 901-1997
| 鋁制傳輸塔用螺栓及螺母
| Standard Specification for Aluminum Transmission Tower Bolts and Nuts
|
| IEEE C 135.1-1999
| 架空線結構用鍍鋅鋼螺栓和螺母
| (Zinc-coated steel bolts and nuts for overhead line construction)
|
| IEEE C 135.2-1999
| 架空線結構用加螺紋鍍鋅鐵絞線孔眼緊固桿和螺母
| (Threaded zinc-coated ferrous strand-eye anchor rods and nuts for overhead line construction)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|