| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 1083-1965
| 精密六角螺拴、螺釘與螺母(B.S.W和B.S.F 螺紋)規范
| Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
|
| BS 1127-1-1990
| 螺絲板牙和螺母狀板牙.第1部分:手用和機用圓形螺絲板牙和手用板牙柄規范
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks
|
| BS 1127-2-1990
| 螺絲板牙和螺母狀板牙.手用和機用錐形管螺紋用圓形螺絲板牙規范;R系列
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series
|
| BS 1127-3-1990
| 螺絲板牙和螺母狀板牙.手用和機器操作平行管螺紋用圓形螺絲板牙規范;G系列
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series
|
| BS 1127-4-1990
| 螺絲板牙和螺母狀板牙.圓形螺絲板牙術語
| Screwing dies and dienuts - Terminology for circular screwing dies
|
| BS 1127-5-1990
| 螺絲板牙和螺母狀板牙.六角形螺母狀板牙尺寸規范
| Screwing dies and dienuts - Specification for dimensions of hexagon dienuts
|
| BS 1768-1963
| 統一精密六角頭螺栓、螺釘和螺母(UNC與UNF螺紋)規范.標準系列
| Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads) - Normal series
|
| BS 1981-1991
| 統一機用螺釘與機用螺母規范
| Specification for unified machine screws and machine screw nuts
|
| BS 2485-1987
| T形槽、T形螺栓、T形螺母與榫舌規范
| Specification for tee slots, tee bolts, tee nuts and tenons
|
| BS 2827-1957
| 機用壓制螺母(Ｂ.Ａ與惠氏螺紋)規范
| Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)
|
| BS 2A 110-1962
| 飛行器用抗剪鋼螺栓的鋼制螺母(統一六角形和統一螺紋)規范
| Specification for steel nuts (Unified hexagons and Unified threads) for shear bolts for aircraft
|
| BS 2A 122, 2A 123, 2A 124-1981
| 飛行器用防松螺母(統一螺紋)規范
| Specification for clinch nuts (Unified threads) for aircraft
|
| BS 2A 122-1981
| 飛行器用壓扁螺母(統一螺紋)規范
| Specification for clinch nuts (Unified threads) for aircraft
|
| BS 2A 204, 2A 206 [...]-1963
| 航空用<1/4>英寸以下的機器螺釘和螺母(統一螺紋)規范
| Specifications for machine screws and nuts (Unified threads) below <1/4> inch for aeronautical purposes
|
| BS 2A 204, 2A 206, 2A 208 and A 217 to A 225-1963
| 航空用1/4英寸以下的設備螺釘和螺母(統一螺紋)規范
| Specifications for machine screws and nuts (Unified threads) below <1/4> inch for aeronautical purposes
|
| BS 2A 204-1963
| 航空用小于1/4英寸的機器螺釘和螺母(統一螺紋)規范
| Specifications for machine screws and nuts (Unified threads) below 1/4 inch for aeronautical purposes
|
| BS 2A 210-1962
| 飛行器用黃銅螺母(統一六角形和統一螺紋)規范
| Specification for brass nuts (Unified hexagons and Unified threads) for aircraft
|
| BS 2A 24-1962
| 飛行器用抗蝕鋼六角螺母(B.A和B.S.F螺紋)(普通形、薄形、槽形、槽頂形)規范
| Specification for corrosion-resisting steel hexagonal nuts (B.A and B.S.F. threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 2A 27-1962
| 飛行器用鋼制六角螺母(B.A和B.S.F螺紋)(普通形.薄形.槽形和槽頂形)規范
| Specification for steel hexagonal nuts (B.A. and B.S.F threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 2A 29-1962
| 飛行器用鋁合金六角螺母(B.A和B.S.F螺紋)(普通和開槽的)規范
| Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft
|
| BS 2A 293-2005
| 帶有非金屬鎖緊元件的自鎖螺母的采購.米制系列.規格
| Procurement of self-locking nuts with non-metallic locking elements - Metric series - Specification
|
| BS 2A 295-2000
| 最大工作溫度低于或等于425℃的自鎖螺母.試驗方法
| Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C - Test methods
|
| BS 2A 302-2000
| 最大工作溫度低于或等于425℃的自鎖螺母.采購規范
| Nuts, self-locking, with maximum operating temperatures less than or equal to 425 °C - Procurement specification
|
| BS 2A 58-1962
| 飛行器用抗剪螺栓的鋼制六角頭螺母(B.S.F螺紋)規范
| Specification for steel hexagonal nuts (B.S.F. threads) for shear bolts for aircraft
|
| BS 2L 87-1971
| 用于制造螺母、聯軸節和機加工中空零部件的鋁-銅(4.4)-鎂(0.5)-硅(0.7)-錳(0.8)合金六角棒材規范(固溶處理
| Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
| BS 2S 112-1964
| 飛機材料規范.易切削碳素鋼、光亮冷拔棒(40-50噸力/平方英寸;最大直徑或最小斷面尺寸1/2英寸)(主要用于制造
| Specification for aircraft material - Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size 1/2 inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts)
|
| BS 2S 113-1964
| 飛機材料規范.機械制造用40號碳素鋼光亮冷拔棒(45-55噸力/平方英寸;限定等圓斷面1英寸)(主要用于制造螺母)
| Specification for aircraft material - '40' carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts)
|
| BS 2S 147-1976
| 鍛制螺栓、螺母用的含0.5%鎳-鉻-鉬鋼棒規范
| Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
| BS 2S 149-1976
| 鍛制螺栓、螺母用的含1.75%鎳-鉻-鉬鋼棒規范
| Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
| BS 3692-2001
| ISO 米制精密六角螺拴、螺釘和螺母規范
| ISO metric precision hexagon bolts, screws and nuts - Specification
|
| BS 3A 103-1962
| 飛行器用鋼螺母(統一六角形、統一螺紋)(普通形、薄形、槽形和槽頂形)規范
| Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 3A 105-1962
| 飛行器用耐蝕鋼螺母(統一六角形、統一螺紋)(普通形、薄形、槽形和槽頂形)規范
| Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 3A 107-1962
| 飛行器用鋁合金螺母(統一六角形和統一螺紋)(普通和開槽的)規范
| Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft
|
| BS 3A 125 to 3A 132, 3A 136 to 3A 143, 3A 147 to 3A 168, 3A 180, 3A 181, 3A 186, 3A 187, 3A 192, 3A
| 航天器用系緊螺母(統一螺紋)規范
| Specification for stiffnuts (Unified threads) for aircraft
|
| BS 3A 125 to 3A 132-1981
| 飛行器用剛性螺母(統一螺紋)規范
| Specification for stiffnuts (Unified threads) for aircraft
|
| BS 4183-1967
| 機用螺釘和螺母規范.米制系列
| Specification for machine screws and machine screw nuts - Metric series
|
| BS 4185-1-1967
| 機床零件.第1部分:防松螺母("c"型,凹頭緊固螺釘鎖緊)
| Machine tool components - Locknuts ('C' type, socket set screw locking)
|
| BS 4185-9-1976
| 機床零件.第9部分:整平螺釘、螺母及基座板
| Specification - Machine tool components - Levelling screws, nuts and seating plates
|
| BS 4190-2001
| ISO 米制的粗制六角螺拴、螺釘和螺母規范
| ISO metric black hexagon bolts, screws and nuts - Specification
|
| BS 450-1958
| 機用螺釘與機用螺母(B.S.W和 B.S.F螺紋)規范
| Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
|
| BS 4790-1987
| 小點火源對鋪地織物的影響的測定方法(熱金屬螺母法)
| Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
|
| BS 4929-1-1973
| 常作用扭矩式鋼質六角螺母規范.第1部分:米制尺寸
| Specification for steel hexagon prevailing-torque type nuts - Metric series
|
| BS 4929-2-1973
| 常扭矩式鋼質六角螺母規范.第2部分:統一英制系列
| Specification for steel hexagon prevailing-torque type nuts - Unified (inch) series
|
| BS 4933-1973
| ISO 米制粗制帽罩頭和沉頭螺拴、螺釘和六角螺母規范
| Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
|
| BS 4A 100-2003
| 航空航天系列.抗拉強度不超過1249MPa的螺栓和空轉螺母的一般要求規范
| Aerospace series - Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
|
| BS 6040-1981
| 螺栓、螺釘、螺母和附件的名命
| Nomenclature for bolts, screws, nuts and accessories
|
| BS 6101-6-1990
| 機床滾珠絲杠.第6部分:絲杠用球狀螺母和基本尺寸規范
| Machine tool ball screws - Specification for ball nuts and principal dimensions of ball screws
|
| BS 6356-13-1997
| 農作物保護噴霧設備.第13部分:氣動噴霧器:噴嘴旋軸螺母尺寸
| Spraying equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts
|
| BS 64-1992
| 鐵路魚尾板用的標準和高強度鋼螺栓和螺母規范
| Specification for normal and high strength steel bolts and nuts for railway rail fishplates
|
| BS 6416-1983
| 螺釘與螺母裝配工具術語
| Nomenclature for assembly tools for screws and nuts
|
| BS 7644-2-1993
| 直接拉力指示器.螺母面和螺栓面墊圈規范
| Direct tension indicators - Specification for nut face and bolt face washers
|
| BS 7670-1-1993
| 電阻凸焊用鋼螺母和螺栓.第1部分:尺寸和性能規范
| Steel nuts and bolts for resistance projection welding - Specification for dimensions and properties
|
| BS 7670-2-1997
| 電阻凸焊的鋼螺母和螺栓.焊接螺母和螺栓的焊接規范
| Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld bolts
|
| BS 7764-1994
| 六角形開槽螺母和槽頂螺母規范
| Specification for hexagon slotted nuts and castle nuts
|
| BS 7786-2006
| 航空航天系列.MoS2潤滑的耐熱鋼制自鎖六角螺母.等級1100 MPa (環境溫度)315℃
| Specification for unsintered PTFE tapes for general use
|
| BS 856-1969
| 翼形螺母規范
| Specification for wing nuts
|
| BS A 233-236-1971
| 普通六角薄螺母(3B類,UNF螺紋)規范
| Specification for plain hexagonal thin nut (of Class 3B UNJ thread)
|
| BS A 237-240-1971
| 普通六角螺母(3B類,UNF螺紋)規范
| Specification for plain hexagonal nut (of Class 3B UNJ thread)
|
| BS A 242, A 243, A 244, A 245-1974
| 六角形槽頂螺母規范（3B級 UNJ螺紋）
| Specification for hexagonal castle nuts (of Class 3B UNJ thread)
|
| BS A 242-1974
| 六角槽頂螺母(3B類UNF螺紋)規范
| Specification for hexagonal castle nuts (of Class 3B UNJ thread)
|
| BS A 246, A 247, A 248, A 249-1974
| 六角形開槽厚螺母規范(3B級 UNJ螺紋)
| Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)
|
| BS A 246-1974
| 一字槽六角厚型螺母(3B類UNF螺紋)規范
| Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)
|
| BS A 250, A 251, A 252, A 253-1974
| 六角形開槽抗剪螺母規范(3B級 UNJ螺紋)
| Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)
|
| BS A 250-1974
| 一字槽六角抗剪螺母(3B類UNF螺紋)規范
| Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)
|
| BS A 275, A 276 [...]-1981
| 帶非金屬鎖緊墊片的六角自鎖螺母規范.米制系列
| Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 275, A 276, A 277, A 278, A 279, A 280-1981
| 帶非金屬鎖緊插件的六角頭自鎖螺母規范.公制系列
| Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 275-1981
| 具有非金屬鎖緊片的六角自鎖螺母規范.公制系列
| Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 281, A 282 [...]-1981
| 帶非金屬鎖緊墊片的(薄)六角自鎖螺母規范.米制系列
| Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 281, A 282, A 283, A 284, A 285, A 286-1981
| 帶非金屬鎖緊插件的六角頭(薄)自鎖螺母規范.公制系列
| Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 281-1981
| 具有非金屬鎖緊片的六角(薄型)自鎖螺母規范.公制系列
| Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 298-1988
| 最大工作溫度大于425℃的自鎖螺母的試驗方法
| Methods of test for self-locking nuts with maximum operating temperature greater than 425 °C
|
| BS A 31-54-1951
| 航空用英國協會低抗拉強度螺釘和螺母規范
| Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
|
| BS A 314-1997
| 航空航天.帶MJ螺紋的高度降低和標準交叉平面的平六角頭螺母分類:450 MPa(室溫)/120℃、450 MPa(室溫)/235℃
| Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/600 °C - Dimension"
|
| BS A 315-1997
| 航空航天.帶MJ螺紋的高度降低和標稱交叉平面的有槽(齒形)六角頭螺母分類:450MPa(室溫)/120℃、450MPa(室溫)
| Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/60"
|
| BS A 316-1997
| 帶MJ螺紋的標稱高度和標稱交叉平面的有槽(槽頂)六角頭螺母分類:600MPa(室溫)/120℃、600MPa(室溫)/235℃、9
| Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications - 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient temperature)/600 °C - Di"
|
| BS A 317-1997
| 帶MJ螺紋的標稱高度和標稱交叉平面的平六角頭螺母分類:600MPa(室溫)/120℃、600MPa(室溫)/235℃、900MPa(室
| Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications - 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 318-1997
| 帶MJ螺紋的高度降低和減縮交叉平面的有槽(槽頂)六角頭螺母分類:450MPa(室溫)/425℃、600MPa(室溫)/235℃、6
| Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications - 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temperature)/650 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/730 °C and 1100 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 319-1997
| 帶MJ螺紋的高度降低和減縮交叉平面的平六角頭螺母分類:400MPa(室溫)/425℃、600MPa(室溫)/235℃、600MPa(室
| Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temperature)/650 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/730 °C and 1100 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 320-1997
| 雙耳浮動自鎖緊自調整MJ螺紋固定螺母分類:900MPa(室溫)/235℃、900MPa(室溫)/315℃、900MPa(室溫)/425℃.尺
| Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 321-1997
| 單耳浮動自鎖緊自調整MJ螺紋固定螺母分類:900MPa(室溫)/235℃、900MPa(室溫)/315℃、900MPa(室溫)/425℃.尺
| Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 324-1998
| 自鎖緊十二角MJ螺紋分類螺母:1100MPa(室溫)/425℃、1100MPa(室溫)/650°C、1210MPa(室溫)/425°C、1210MPa(
| Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/425 °C and 1550 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 327-1998
| 自鎖緊十二角埋頭孔MJ螺紋分類螺母:1100MPa(室溫)/425℃、1100MPa(室溫)/650°C、1210MPa(室溫)/425°C、12
| Nuts, bihexagonal, self-locking, with counterbore and MJ threads , classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/425 °C and 1550 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 329-1999
| MJ螺紋的承窩安裝的單耳固定自鎖托板螺母.等級:1100MPa(室溫)/235℃、 1100MPa(室溫)/315℃和1100MPa(室溫)
| Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 330-1999
| MJ螺紋的增大承窩安裝的雙耳游動自鎖托板螺母.等級:900MPa(室溫)/235℃、900MPa(室溫)/315℃、900MPa(室溫)
| Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 333-1999
| MJ螺紋的承窩安裝的雙耳游動自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/
| Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 334-1999
| MJ螺紋的承窩安裝的90°倒角固定自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室
| Nuts, anchor, self-locking, fixed, 90 ° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 335-1999
| MJ螺紋的承窩安裝的小尺寸系列封閉倒角固定自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和
| Nuts, anchor, self-locking, fixed, closed corner, reduced series , with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 336-1999
| MJ螺紋的承窩安裝的雙耳固定自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/
| Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 337-1999
| MJ螺紋的承窩安裝的單耳游動自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/
| Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 338-1999
| MJ螺紋的承窩安裝的小尺寸系列雙耳固定自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100
| Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 339-1999
| MJ螺紋的承窩安裝的小尺寸系列雙耳游動自鎖托板螺母..等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和110
| Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 340-1999
| MJ螺紋的承窩安裝的小尺寸系列90°倒角固定自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和
| Nuts, anchor, self-locking, fixed, 90 ° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 342-1999
| 普通或帶槽(槽頂)螺母.采購規格
| Nuts, plain or slotted (castellated) - Procurement specification
|
| BS A 343-1999
| 普通或開槽（槽頂）螺母.試驗方法
| Nuts, plain or slotted (castellated) - Test methods
|
| BS A 344-1999
| MJ螺紋的承窩安裝的小尺寸系列單耳固定自鎖托板螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100
| Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperatures)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 345-1999
| MJ螺紋的承窩安裝和帶強制鎖緊墊圈的自鎖六角螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MP
| Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 353-2000
| 涂覆或未涂覆的金屬材料制的MJ螺紋游動自鎖螺母的襯套.尺寸
| Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions
|
| BS A 358-2-2000
| MJ螺紋.螺栓和螺母的極限尺寸
| MJ threads - Limit dimensions for bolts and nuts
|
| BS A 359-2000
| MJ螺紋游動自鎖圓筒形螺母.等級:900MPa(室溫)/235℃、1100MPa(室溫)/235℃、1250MPa(室溫)/235℃和1550MPa(
| Nuts, barrel, self-locking, floating, with MJ threads, classifications - 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/235 °C - Dimensions
|
| BS A 360-2000
| 筒形自鎖螺母用金屬薄板彈簧承座.尺寸
| Retainers, spring, sheet metal, for self-locking barrel nuts - Dimensions
|
| BS AU 50-2.3-1994
| 輪胎和車輪.第2部分:車輪和輪輞.第3節:商用車輛的道路車輪螺母、雙頭螺栓和螺栓規范
| Tyres and wheels - Wheels and rims - Specification for road-wheel nuts, studs and bolts for commercial vehicles
|
| BS EN 14218-2003
| 六角法蘭面螺母.細牙螺紋
| Hexagon nuts with flange - Fine pitch thread
|
| BS EN 14399-3-2005
| 預加負荷用高強度結構螺栓組件.系統HR.六角螺栓和螺母組件
| High-strength structural bolting for preloading - System HR - Hexagon bolt and nut assemblies
|
| BS EN 14399-4-2005
| 預負載用高強度結構螺栓連接組件.系統HV.六螺栓和螺母組件
| High-strength structural bolting assemblies for preloading - System HV - Hexagon bolt and nut assemblies
|
| BS EN 1661-1998
| 帶法蘭的六角螺母
| Hexagon nuts with flange
|
| BS EN 1663-1998
| 帶法蘭(非金屬嵌入件)的流行扭矩型六角螺母
| Prevailing torque type hexagon nuts with flange (with non-metallic insert)
|
| BS EN 1664-1998
| 帶法蘭的流行扭矩型全金屬六角螺母
| Prevailing torque type all-metal hexagon nuts with flange
|
| BS EN 1666-1998
| 帶公制小螺距螺紋法蘭(非金屬嵌入件)的流行扭矩型六角螺母
| Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread
|
| BS EN 1667-1998
| 帶公制小螺距螺紋法蘭的流行全金屬扭矩型六角螺母
| Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
|
| BS EN 20225-1992
| 緊固件.螺栓、螺柱和螺母.圖形符號和尺寸
| Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions
|
| BS EN 20898-2-1994
| 緊固件機械性能.第2部分:有規定檢驗載荷值的螺母.粗牙螺紋
| Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread
|
| BS EN 2264-1996
| 二硫化鉬潤滑的鍍鎘合金鋼加大承窩安裝的雙耳浮動自鎖托板螺母.等級:900MPa(室溫)/235℃
| Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS2 lubricated - Classification: 900 MPa (at ambient temperature) /235 °C
|
| BS EN 2680-2006
| 航空航天系列.MoS2潤滑鎘鍍層鋁合金雙耳游動自調自鎖托板螺母.等級:900MPa(室溫)/235℃
| Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
|
| BS EN 2752-1990
| 帶承窩的小尺寸系列的雙耳固定自鎖托板螺母規范.分類:1100MPa/235℃
| Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification: 1100 MPa/235 °C
|
| BS EN 2753-1996
| 二硫化鉬潤滑的鍍鎘合金鋼的承窩安裝的單耳固定自鎖托板螺母.等級:1100MPa(室溫)/235℃
| Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification - 1100 MPa (at ambient temperature) / 235 °C
|
| BS EN 2754-2006
| 航空航天系列.沉頭不固定雙耳自鎖防松螺母.分類:1100 MPa/235℃
| Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1100 MPa/235 °C
|
| BS EN 2809-2001
| 航空航天系列.鍍銀的耐熱鋼制公稱對邊底高度的開槽/槽頂六角螺母.分級.900MPa(室溫)/650℃
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification - 900 MPa (at ambient temperature)/650 °C
|
| BS EN 2810-2001
| 航空航天系列.鈍化處理的耐熱鋼制標準對邊低高度的開槽/槽頂六角螺母.等級:900MPa(室溫)/650℃
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C
|
| BS EN 2881-2006
| 航空航天系列.耐蝕鋼制鈍化MoS2潤滑雙耳游動沉孔密封耐燃料性自鎖托板螺母.等級:900MPa(室溫)/120℃
| Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C
|
| BS EN 2882-2006
| 航空航天系列.MoS2潤滑的鎘厚板鋼制沉頭自鎖六角螺母和附屬墊圈.等級1100 MPa (環境溫度)235℃
| Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 235℃
|
| BS EN 28839-1992
| 緊固件機械性能.有色金屬制螺栓、螺釘、螺柱和螺母
| Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals
|
| BS EN 2906-1994
| FE-PA92HT(A 286)耐熱鋼雙六角頭自鎖螺母.等級:1100MPa(室溫)/650℃
| Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2907-1996
| 鍍銀的FE-PA92HT(A286)耐熱鋼雙六角頭自鎖螺母.等級:1100MPa(室溫)/650℃
| Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C
|
| BS EN 2908-1994
| FE-PA92HT(A286)耐熱鋼深承窩雙六角頭自鎖螺母.等級:1100MPa(室溫)/650℃
| Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2909-1995
| 鍍銀的FE-PA92HT(A286)耐熱鋼制的深承窩的雙六角頭自鎖螺母.等級:1100MPa(室溫)/650C°
| Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2910-1994
| FE-PA92HT(A286)耐熱鋼制自鎖螺母.等級:1100MPa(室溫)/650℃
| Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2911-1995
| 鍍銀的FE-PA92HT(A286)耐熱鋼制的自鎖桿螺母.等級:1100MPa(室溫)/650℃
| Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2997-004-2006
| 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard
|
| BS EN 2997-006-2006
| 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
|
| BS EN 3004-1997
| FE-PA2601(A286)耐熱鋼制MJ螺紋自鎖螺母.等級:1100 MPa(室溫)/650℃.技術規范
| Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C - Technical specification
|
| BS EN 3005-2005
| 航空航天系列.自鎖緊、MJ螺紋、NI-PH1302耐熱鎳基合金(沃斯帕洛尹合金)制鍍銀或不鍍銀螺母.等級:1210MPa (
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature) / 730 °C - Technical specification
|
| BS EN 3012-1996
| 耐熱鎳基合金HI-P101HT(沃斯帕洛尹合金)雙六角頭自鎖螺母.等級:1210 MPa(室溫)/730℃
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
|
| BS EN 3013-1996
| 鍍銀的耐熱鎳基合金HI-P101HT(沃斯帕洛尹合金)雙六角頭自鎖螺母.等級:1210 MPa(室溫)/730℃
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C
|
| BS EN 3014-2001
| 航空航天系列.FE-PA2601(A286)耐熱鋼制鋸齒形自鎖帶柄螺母.等級:1100MPa(室溫)/650℃
| Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 3015-2001
| 航空航天系列.鍍銀的FE-PA2601(A286)耐熱鋼制鋸齒形自鎖緊帶柄螺母.等級:1100MPa(室溫)/650℃
| Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 3064-1996
| 細齒形的螺桿自鎖螺母.安裝程序
| Shank nuts, self-locking, serrated - Installation procedure
|
| BS EN 3065-1996
| 細齒螺桿自鎖螺母的安裝孔.設計標準
| Installation holes for self-locking, serrated shank nuts - Design standard
|
| BS EN 3080-2006
| 鈦合金8°30'管連接件.帶止推金屬絲螺母的縮短三通
| Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut
|
| BS EN 3149-1997
| 桿螺母 60度型鍛法蘭安裝孔.設計標準
| Shank nuts - Installation holes, 60 ° swage, flanges - Design standard
|
| BS EN 3152-2005
| 航空航天系列.自鎖緊、MJ螺紋、FE-PA2601(A286)耐熱鋼制鍍銀或不鍍銀螺母.分類:1100MPa (環境溫度下)/425
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification
|
| BS EN 3196-1994
| 鍍銀的FE-PA92HT(A286)耐熱鋼六角自鎖螺母.等級:1100 MPa(室溫)/425℃
| Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3230-2001
| 航空航天系列.鍍鎘的鋼制標準對邊低高度的開槽/槽頂六角螺母.等級:900MPa(室溫)/235℃
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classificaiton: 900 MPa (at ambient temperature)/235 °C
|
| BS EN 3239-1996
| HI-P101HT型耐熱鎳基合金(沃斯帕洛尹合金)制螺紋鍍銀的自鎖十二角頭螺母.等級:1210 MPa(室溫)/730℃型
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730 °C
|
| BS EN 3264-2001
| 航空航天系列.鈦合金8°30管連接件’.止推金屬絲螺母
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Thrust wire nut
|
| BS EN 3266-2001
| 航空航天系列.鈦合金管連接件.悶頭螺母
| Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut
|
| BS EN 3299-2007
| 航空航天系列.鍍銀、右或左旋MJ螺紋、自鎖緊、FE-PA2601(A286)耐熱鋼軸螺母和螺環.技術規范
| Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
|
| BS EN 3372-009-2007
| 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, jam nut mounting - Product standard
|
| BS EN 3377-1996
| 耐熱鋼FE-PA92HT(A286)制自鎖六角螺母.等級:1100 MPa(室溫)/425℃
| Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3536-2006
| 航空航天系列.MoS2潤滑的耐熱鋼制自鎖緊六角螺母.分類:1100 MPa(環境溫度)/315℃
| Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
|
| BS EN 3645-009-2006
| 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第009部分:防松螺母安裝圓
| Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 009: Receptacle, round flange, jam nut mounting — Product standard
|
| BS EN 3645-010-2006
| 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第010部分:防松螺母安裝圓
| Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 010: Receptacle, hermetic, round flange, jam nut mounting — Product standard
|
| BS EN 3646-004-2006
| 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電連器.第004部分:鎖緊螺母安裝密封插件.產品標準
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 004: Receptacle, jam-nut mounting - Product standard
|
| BS EN 3646-006-2006
| 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電器連器.第006部分:鎖緊螺母安裝密封插座.產品標準
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 006: Receptacle, hermetic jam-nut mounting - Product standard
|
| BS EN 3660-003-2006
| 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.EN 2997和EN 4067中A型不穿孔螺母的產品標準
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067: Product standard |
| BS EN 3720-1995
| 二硫化鉬涂覆的耐熱鋼FE-PA92HT(A286)制自鎖雙六角頭螺母.等級:1100 MPa(室溫)/425℃
| Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3721-1995
| 二硫化鉬涂覆的FE-PA92HT(A286)耐熱鋼制的深承窩的雙六角頭自鎖螺母.等級:1100 MPa(室溫)/425℃
| Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3722-1995
| 二硫化鉬涂覆的FE-PA92HT(A286)耐熱鋼制的自鎖桿螺母.等級:1100 MPa(室溫)/425℃
| Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3723-1996
| 二硫化鉬涂覆的FE-PA92HT(A286)型耐熱鋼制自鎖六角頭螺母.等級:1100 MPa(室溫)/425℃
| Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3726-2005
| 航空航天系列.耐熱鋼FE-PA2601 (A286)制MoS2涂覆的自鎖夾緊螺母.等級: 1100 MPa(室溫)/425 鳦
| Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3741-2005
| 航空航天系列.米制夾緊螺母.安裝孔和組件
| Aerospace series - Nuts, clip, metric - Installation holes and assembly
|
| BS EN 3752-2005
| 航空航天系列.耐熱鋼FE-PA2601(A286)制MoS2涂覆的自鎖MJ螺紋螺母.等級: 1100 MPa(室溫)/425 鳦.技術規范
| Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature) / 425 °C - Technical specification
|
| BS EN 3856-2002
| 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.止推金屬線用轉動螺母
| Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire
|
| BS EN 4011-2005
| 航空航天系列.十二角頭自鎖緊的鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/600 鳦
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C
|
| BS EN 4012-2004
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MoS2涂覆的自鎖緊雙六角頭螺母.等級:1550MPa(室溫)/4
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
|
| BS EN 4013-2005
| 航空航天系列.自鎖緊鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制帶柄螺母.等級:1550MPa(室溫)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4018-2001
| 航空航天系列.鈦合金管連接件8°30'.帶止推金屬絲螺母的90°彎頭
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° with thrust wire nut
|
| BS EN 4020-2001
| 航空航天系列.鈦合金8°30'管連接件.帶止推金屬絲螺母(thrust wire nut)的90°彎頭焊接端
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded end with thrust wire nut
|
| BS EN 4024-2001
| 航空航天系列.鈦合金管連接件8°30'.帶止推金屬絲螺母的45°彎頭焊接端頭
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° welded end with thrust wire nut
|
| BS EN 4027-2001
| 航空航天系列.鈦合金管連接件8°30'.帶止推金屬絲螺母的三通管分支
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees branch with thrust wire nut
|
| BS EN 4028-2001
| 航空航天系列.鈦合金管連接件8°30'.在使用的帶止推金屬絲螺母的三通管
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees with thrust wire nut on run
|
| BS EN 4031-2001
| 航空航天系列.鈦合金管連接件8°30'.焊接活接頭用螺母
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union
|
| BS EN 4047-2004
| 航空航天系列.自鎖緊MJ螺紋鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/600 鳦.技術
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550MPa (at ambient temperature)/600 °C - Technical specification
|
| BS EN 4048-2004
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MoS2涂覆的自鎖、帶MJ螺紋的螺母.等級:1550MPa(室溫)
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C - Technical specification
|
| BS EN 4069-1996
| 鈍化處理的耐熱鋼小尺寸對邊低高度普通六角頭螺母.等級:600 MPa(室溫)/650℃
| Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600MPa (at ambient temperature)/650 °C
|
| BS EN 4116-2004
| 航空航天系列.耐熱鋼FE-PA2601 (A286)制自鎖、帶鍍銀螺紋的六角螺母.等級:1100MPa(室溫)/425℃
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 425 °C
|
| BS EN 4117-2004
| 航空航天系列.十二角頭自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH 2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/60
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4118-2004
| 航空航天系列.耐熱鋼FE-PA2601(A286)制自鎖、帶鍍銀螺紋的十二角螺母.等級:1100MPa(室溫)/650℃
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 650 °C
|
| BS EN 4119-2004
| 航空航天系列.耐熱鋼FE-PA2601(A286)制自鎖、深沉頭孔的、帶鍍銀螺紋的十二角螺母.等級:1100MPa(室溫)/650
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 650 °C
|
| BS EN 4120-2004
| 十二角、自鎖緊、NI-PH1302耐熱鎳基合金(沃斯帕洛尹合金)、螺紋鍍銀的螺母.分類:1210MPa(環境溫度下)/730
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread - Classification - 1 210 MPa (at ambient temperature) / 730 °C
|
| BS EN 4121-2004
| 航空航天系列.耐熱鋼FE-A2601(A286)制自鎖、鋸齒、帶鍍銀螺紋的有柄螺母.等級:1100MPa(室溫)/650℃
| Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE- A2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) /650 °C
|
| BS EN 4122-2004
| 航空航天系列.耐熱鋼FE-PA2601(A286)制自鎖、帶鍍銀螺紋的有柄螺母.等級:1100MPa(室溫)/650℃
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature)/650 °C
|
| BS EN 4123-2004
| 航空航天系列.自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH 2601(鉻鎳鐵合金718)帶柄螺母.等級:1550MPa(室溫)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4124-2004
| 航空航天系列.60 型模用自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH1302(一種耐高熱鎳基合金)帶柄螺母.等級:1210MP
| Aerospace series - Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60 ° swage - Classification - 1 210 MPa (at ambient temperature) / 730 °C
|
| BS EN 4590-2005
| 航空航天系列.耐腐蝕鋼制鈍化、自鎖盤頭螺母用金屬片彈簧固定器
| Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
|
| BS EN 4591-2005
| 航空航天.耐高溫鎳基合金鋼制MOS2潤滑的自調準筒形游動自鎖螺母.等級為:1550 MPa (環境溫度) / 315 °C
| Aerospace series - Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated - Classification: 15 50 MPa (at ambient temperature) / 315 °C
|
| BS EN 4610-2005
| 航空航天系列.8°30'鈦合金管接頭.帶推進線螺母的45°彎頭
| Pipe coupling 8°30' in titanium alloy — Elbows 45°, with thrust wire nut
|
| BS EN ISO 10484-1997
| 螺母的擴孔試驗
| Widening test on nuts
|
| BS EN ISO 10485-2004
| 螺母錐形保證載荷試驗
| Cone proof load test on nuts
|
| BS EN ISO 10511-1998
| 通用扭矩型六角薄螺母(用非金屬墊圈)
| Prevailing torque type hexagon thin nuts (with non-metallic insert)
|
| BS EN ISO 10512-1998
| 帶米制細牙螺紋的1型常用扭矩型六角螺母(帶有非金屬插入物).性能等級6、8和10
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10
|
| BS EN ISO 10513-1998
| 帶米制細牙螺紋的2型常用扭矩型六角螺母.性能等級8、10和12
| Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread - Property classes 8, 10 and 12
|
| BS EN ISO 21670-2003
| 法蘭六角焊接螺母
| Hexagon weld nuts with flange
|
| BS EN ISO 2320-1998
| 常用扭矩式鋼質六角螺母.機械和性能要求
| Prevailing torque type steel hexagon nuts - Mechanical and performance requirements
|
| BS EN ISO 3506-2-1998
| 耐腐蝕不銹鋼緊固件的機械特性.螺母
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Nuts
|
| BS EN ISO 4032-2001
| 六角頭螺母.1型.產品等級A和B
| Hexagon nuts, style 1. Product grades A and B
|
| BS EN ISO 4033-2001
| 六角頭螺母.2型.產品等級A和B
| Hexagon nuts, style 2. Product grades A and B
|
| BS EN ISO 4034-2001
| 六角頭螺母.產品等級C級
| Hexagon nuts - Product grade C
|
| BS EN ISO 4035-2001
| 六角頭薄螺母(倒角).產品等級A和B級
| Hexagon thin nuts (chamfered) - Product grades A and B
|
| BS EN ISO 4036-2001
| 六角頭薄螺母(無倒角).產品等級B級
| Hexagon thin nuts (unchamfered) - Product grade B
|
| BS EN ISO 4759-1-2001
| 緊固件公差.螺栓、螺釘、螺柱和螺母.產品等級A、B和C級
| Tolerances for fasteners - Bolts, screws, studs and nuts - Product grades A, B and C
|
| BS EN ISO 4759-3-2000
| 緊固件公差.螺栓、螺釘和螺母用平墊圈.產品等級A和C
| Tolerances for fasteners - Plain washers for bolts, screws and nuts - Product grades A and C
|
| BS EN ISO 6157-2-2004
| 緊固件.表面缺陷.螺母
| Fasteners - Surface discontinuities - Nuts
|
| BS EN ISO 6789-2003
| 螺釘和螺母用裝配工具.手動扭具.設計合格檢驗、質量合格檢驗和再校準程序的要求和試驗方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
|
| BS EN ISO 7040-1998
| 1型通用扭矩六角螺母(用非金屬墊圈).性能類別5、8和10
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10
|
| BS EN ISO 7042-1998
| 常用扭矩式全金屬六角螺母.性能等級5、8、10和12
| Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12
|
| BS EN ISO 7719-1998
| 扭矩型全金屬六角螺母.1型:5，8和10級特性
| Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10
|
| BS EN ISO 8662-7-1997
| 便攜式手提動力工具.手柄振動測量.扳手,旋具與具有沖擊,推力和棘齒作用的螺母旋具
| Hand-held portable power tools - Measurement of vibrations at the handle - Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
|
| BS EN ISO 8673-2001
| 1型六角頭螺母.米制細牙螺紋.產品等級A和B級
| Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B
|
| BS EN ISO 8674-2001
| 2型六角頭螺母.米制細牙螺紋.產品等級A和B級
| Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B
|
| BS EN ISO 8675-2001
| 米制細牙螺紋六角頭薄螺母（倒角）.產品等級A和B級
| Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B
|
| BS EN ISO 887-2000
| 通用米制螺栓、螺釘和螺母用平墊圈.總方案
| Plain washers for metric bolts, screws and nuts for general purposes - General plan
|
| BS EN ISO 898-6-1996
| 緊固件的機械特性.具有規定檢驗荷載值的螺母.細牙螺紋
| Mechanical properties of fasteners - Nuts with specified proof load values - Fine pitch thread
|
| BS HR 650-1972
| 制造螺栓、螺柱、定位螺釘和螺母用耐熱高膨脹鋼棒材和線材(Ni25.5、Cr15、Ti2、Mn1.5、Mo1.25、Si0.7、V0.3
| Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm)
|
| BS ISO 10102-2001
| 螺釘和螺母用裝配工具.工程用雙頭呆扳手.扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10103-2001
| 螺釘和螺母用裝配工具.雙頭直頸和彎頸套筒扳手.扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10104-2001
| 螺釘和螺母用裝配工具.雙頭高頸和矮頸套筒扳手.扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10484-1997
| 螺母的加寬試驗
| Widening test on nuts
|
| BS ISO 10663-1999
| 六角法蘭面螺母.細牙螺紋
| Hexagon nuts with flange - Fine pitch thread
|
| BS ISO 1085-2000
| 螺釘和螺母用裝配工具.雙頭扳手.尺寸配對
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
|
| BS ISO 10897-1998
| 錐度比為1:10的刀架夾頭.夾頭、刀架和螺母
| Collets for tool holders with taper ratio 1:10 - Collets, holders , nuts
|
| BS ISO 10914-1998
| 螺釘和螺母用安裝工具.開鍵槽用套管扳手
| Assembly tools for screws and nuts - Sockets and wrenches for spline drive
|
| BS ISO 1173-2001
| 螺釘和螺母用裝配工具.機動和手動旋具類的驅動端和連接部件.尺寸和扭矩試驗
| Assembly tools for screws and nuts - Drive ends for hand and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing
|
| BS ISO 2351-1-2007
| 螺釘和螺母用裝配工具.機器驅動旋具頭.一字槽頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for slotted head screws
|
| BS ISO 2351-2-2002
| 螺釘和螺母的裝配工具.機器控制的改錐.十字槽凹頭螺釘用改錐
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for cross-recessed head screws
|
| BS ISO 2351-3-2002
| 螺釘和螺母用裝配工具.機器控制的改錐.六角內孔螺絲用改錐
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for hexagon socket screws
|
| BS ISO 262-1999
| ISO普通米制螺紋.螺釘,螺栓和螺母的選用尺寸
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
|
| BS ISO 2725-3-2001
| 螺釘和螺母用裝配工具.方形傳動套筒.機用套筒(無沖擊).尺寸
| Assembly tools for screws and nuts - Square drive sockets - Machine-operated sockets ("non-impact") - Dimensions
|
| BS ISO 2982-2-2001
| 滾動軸承.附件.防松螺母和鎖緊裝置.尺寸
| Rolling bearings - Accessories - Locknuts and locking devices - Dimensions
|
| BS ISO 4161-1999
| 帶法蘭的六角螺母.粗螺紋
| Hexagon nuts with flange - Coarse thread
|
| BS ISO 6787-2001
| 螺釘和螺母用裝配工具.可調扳手
| Assembly tools for screws and nuts - Adjustable wrenches
|
| BS ISO 7041-2002
| 2型常用扭矩式六角螺母(使用非金屬墊圈).性能類別9和12
| Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
|
| BS ISO 7720-1998
| 2型常用扭矩全金屬六角螺母.性能9級
| Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
|
| BS ISO 7738-2001
| 螺釘和螺母用組合工具.組合扳手.扳手長度和頭部最大厚度
| Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
|
| BS ISO 8788-2000
| 航空航天.米制螺母.形位公差
| Aerospace - Nuts, metric - Tolerances of form and position
|
| BS ISO 8992-2005
| 緊固件.螺栓、螺釘、螺柱和螺母通用要求
| Fasteners - General requirements for bolts, screws, studs and nuts
|
| BS S 158-1977
| 鍛制螺栓和螺母的含1%鉻-鉬鋼棒規范
| Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
| 編號 | 中文名稱 | 英文名稱 |
|---|