| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 103-5-1972
| ISO 米制梯形螺紋.標稱直徑8～100mm螺母螺紋的極限尺寸
| ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
|
| DIN 103-6-1972
| ISO 米制梯形螺紋.標稱直徑105～300mm螺母螺紋的極限尺寸
| ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
|
| DIN 1478-2005
| 鋼管材或鋼棒材制套筒螺母
| Turnbuckles made from steel tubes or round steel bars
|
| DIN 15413-1983
| 起重機的下滑車.提升吊鉤螺母
| Bottom blocks for lifting appliances; lifting hook nuts
|
| DIN 1587-2000
| 高型六角蓋螺母
| Hexagon domed cap nuts, high type
|
| DIN 16262-2004
| 壓力表用帶調節螺母和軸套式連接的PN 6和PN 16旋塞
| PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
|
| DIN 16263-2004
| 壓力表用帶調節螺母、軸套式連接和試驗連接的PN 16旋塞
| PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
|
| DIN 16283-2004
| 壓力表及其附件用調整螺母
| Adjusting nuts for pressure gauges and their accessories
|
| DIN 16903-1-1974
| 塑料模塑件用開口螺母鑲件
| Open Insert Nuts for Plastics Mouldings
|
| DIN 16903-2-1974
| 塑料模塑件用盤閉口螺母鑲件
| Closed Insert Nuts with Disc for Plastics Mouldings
|
| DIN 16903-3-1974
| 塑料模塑用、帶有固定孔的嵌件螺母
| Closed Insert Nuts with Dead Hole for Plastics Mouldings
|
| DIN 16903-4-1991
| 嵌入螺母.第4部分:塑料模制件和壓鑄件用重型閉式螺紋件
| Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole
|
| DIN 1804-1971
| 鉤形扳手用開槽圓螺母.ISO米制細牙螺紋
| Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread
|
| DIN 1816-1971
| 內部有固定銷孔的圓螺母.米制ISO細螺紋
| Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread
|
| DIN 1988-7-2004
| 鋼管和圓鋼棒制作套筒螺母
| Turnbuckles made from steel tubes or round steel bars
|
| DIN 20033-1990
| 軟管連接件.帶壓緊螺母的錐形管嘴
| Hose fittings; tapered nozzle with clamping nut
|
| DIN 2082-1-1979
| 第1部分:銑床心軸用螺母
| Nuts for Milling Machine Arbors
|
| DIN 22425-1990
| 礦山預防潛在性爆炸氣體的電氣設備.三角頭螺母
| Triangular nuts for use with electrical equipment in mining
|
| DIN 2510-5-1971
| 帶縮徑桿的螺栓連接件.六角螺母
| Bolted Connections with Reduced Shank; Hexagon Nuts
|
| DIN 2510-6-1974
| 帶減縮刀柄的螺栓連接件.第8部分:螺母
| Bolted Connections with Reduced Shank; Cap Nuts
|
| DIN 25200-1997
| 鐵路車輛用螺釘、螺栓和螺母.一覽表
| Screws, bolts and nuts for rail vehicles - Summary
|
| DIN 267-24-2007
| 緊固件.交貨技術條件.第24部分:不帶規定驗證載荷值的螺母用硬度等級
| Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values
|
| DIN 28129-1990
| 蓋板用壓緊螺母
| Clamp nuts; for covers
|
| DIN 28602-2000
| 球墨鑄鐵管及管件.栓接壓蓋密封接頭.組件、套管、中間環、密封圈、螺栓和螺母
| Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
|
| DIN 29638-2-1988
| 航空和航天.自鎖壓緊螺母.結構和安裝說明
| Aerospace; press nuts, self-locking; directions for design and installation
|
| DIN 29639-2-1988
| 航空和航天.自鎖、浮動、壓緊螺母.結構和安裝說明
| Aerospace; press nuts, self-locking, floating; directions for design and installation
|
| DIN 30386-2007
| 六角螺母.倒圓梯形螺紋
| Hexagonal nuts - Rounded acme thread
|
| DIN 30387-2007
| 帶肩螺母.米制細牙螺紋、倒圓梯形螺紋
| Shouldered nuts - Metric fine thread, rounded acme thread
|
| DIN 30389-2007
| 動力裝置螺旋扣和牽引掛鉤用帶圓螺紋的六角螺母和槽頂螺母
| Hexagon and castle nuts with knuckle thread - For motive power units turnbuckles and drawbars
|
| DIN 3118-2007
| 螺母扳手.C系列的試驗扭矩
| Flare nut wrenches - Test torques series C
|
| DIN 314-1999
| 翼型螺母.帶邊的翼型
| Wing nuts - Edged wings
|
| DIN 315-1998
| 圓形翼的蝶形螺母
| Wing nuts, rounded wings
|
| DIN 3238-2001
| 壓縮空氣匹配件.爪狀匹配件,帶安全螺母內部寬度42mm,具有凸或凹軟管連接末端的匹配件連接環
| Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring
|
| DIN 3292-1-1984
| 家用安裝設備配件.有色金屬活接頭螺母
| Fittings for domestic installation; nonferrous metal union nuts
|
| DIN 3292-2-1984
| 家用安裝設備配件.可鍛鑄鐵活接頭螺母
| Fittings for domestic installation; malleable cast iron union nuts
|
| DIN 34814-1999
| 塑料制六角螺母
| Plastic hexagon nuts
|
| DIN 34818-2002
| 帶攻絲螺紋的薄彈簧螺母
| Sheet spring nuts with tappping screw thread
|
| DIN 3489-2001
| 壓縮空氣匹配件.爪狀匹配件,無安全螺母的42mm內寬,凸形凹形匹配件,軟管和封閉連接末端旋轉匹配件,連接環
| Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
|
| DIN 357-1998
| 米制粗螺距ISO螺紋M3至M68的機器螺母絲錐
| Machine nut taps for coarse pitch metric ISO-threads M3 to M68
|
| DIN 3853-2001
| 非釬焊和釬焊壓合接頭.與管接螺母使用的雙頭螺栓端部.設計圖
| Non-soldering and soldering compression fittings - Stud ends for use with union nut; Design sheet
|
| DIN 3870-2001
| 非釬焊和釬焊壓合接頭.管接螺母系列LL
| Non-soldering and soldering compression fittings - Union nuts series LL
|
| DIN 3872-2003
| 非焊接壓緊聯軸節.對接結構活接頭螺母
| Non-soldering compression couplings - Union nuts for butt joints
|
| DIN 4000-151-2005
| 特性表.第151部分:螺釘和螺母用手動和機動裝配工具的連接部件
| Tabular layouts of properties - Part 151: Connecting parts for hand- and machine-operated assembly tools for screws and nuts
|
| DIN 4000-2 Bb.1-1999
| 零件特性圖表.第2部分:螺釘和螺母.螺釘?shù)募夹g(shù)標準
| Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on screws
|
| DIN 4000-2 Bb.2-1999
| 零件特性圖表.第2部分:螺釘和螺母.螺母的技術標準
| Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on nuts
|
| DIN 431-2000
| 帶DIN ISO 228-1螺紋的管螺母
| Pipe nuts with thread according to DIN ISO 228-1
|
| DIN 44879-1985
| 帶金屬護罩的管狀電加熱器的連接管用的扁平六角螺母和螺釘頭
| Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated
|
| DIN 462-1973
| 機床.按DIN 1804鉤形扳手用開槽圓螺母的內舌墊圈
| Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804
|
| DIN 466-2006
| 滾花長形螺母
| Knurled nuts, high type
|
| DIN 467-2006
| 短型滾花螺母
| Knurled nuts, low type
|
| DIN 48324-1959
| 1KV以下通信線路和電力架空線.系桿.墻板和吊耳螺母
| Telecommunication and power current overhead lines below 1 kV; tie bar, wall plate, lifting eye nut
|
| DIN 48351-2-1967
| A形天線桿.第2部分:螺栓、螺母、墊圈
| A-masts; bolts, nuts, washers
|
| DIN 49778-7-1990
| 照明燈柱.安裝裝置用帶滑動螺母的托架
| Lighting columns; brackets with sliding nuts for mounting of devices
|
| DIN 508-2002
| T型槽用螺母
| Nuts for T-slots
|
| DIN 5290-1-1983
| 有鎖緊螺母的輕金屬彈簧鉤.尺寸、要求、檢驗
| Snap hook from light metal; with setting nut; dimensions, requirements and testing
|
| DIN 5290-2-1977
| 無定位螺母的輕金屬彈簧箍.第2部分:尺寸、交貨技術條件
| Light metal spring hook without setting nut; dimensions, technical conditions of delivery
|
| DIN 546-1986
| 開槽圓螺母
| Slotted round nuts
|
| DIN 547-2006
| 一端鉆孔的圓螺母
| Round nuts with drilled holes in one face
|
| DIN 548-2007
| 側面帶銷釘?shù)膱A螺母
| Round nuts with set pin holes in side
|
| DIN 557-1994
| 方螺母.C級產品
| Square nuts; product grade C
|
| DIN 562-2000
| 方扁螺母.產品等級 B級
| Square thin nuts - Product grade B
|
| DIN 56926-1997
| 劇場和舞臺方位布景.帶鎖緊螺母的快速連接件.尺寸、要求和試驗
| Theatre engineering, stage directions scenery - Quick links with screw caps - Dimensions, requirements and testing
|
| DIN 582-2003
| 吊環螺母
| Eye nuts
|
| DIN 58521-1994
| 繪圖儀器用滾花螺母
| Knurled nuts for drawing instruments
|
| DIN 6303-2006
| 滾花螺母
| Knurled nuts
|
| DIN 6305-2002
| 帶固定卡式螺栓的螺絲旋桿螺母
| Tommy nuts with fixed clamping bolt
|
| DIN 6307-2002
| 帶移動卡式螺栓的螺絲旋桿螺母
| Tommy nuts with movable clamping bolt
|
| DIN 6327-4-1981
| 莫氏錐柄刀具的可調轉接器.轉接器的調整螺母
| Adjustable adaptors for tools with morse taper shanks; adjustment nuts for adaptors
|
| DIN 6330-2003
| 1.5d厚六角頭螺母
| Hexagon nuts with a height of 1,5 d
|
| DIN 6331-2003
| 1.5d厚六角頭環形螺母
| Hexagon collar nuts with a height of 1,5 d
|
| DIN 6379-2003
| 與T型槽螺母共用的螺柱
| Studs for use with tee nuts
|
| DIN 65121-1992
| 航空航天.螺栓、螺釘、螺母和有關零件.供車間查看的產品一覽表和選用.不適用于新設計
| Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
|
| DIN 65220-2002
| 航空航天.固定式或可選擇式鋁槽螺母間距帶MJ螺紋自鎖螺母的成組槽形螺母組件.分類:1100MPa/120℃
| Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 °C
|
| DIN 65238-2002
| 航空航天.自鎖非浮動鋼制角緣帶MJ螺紋深埋頭錨定螺母.分類:1100MPa/235℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C
|
| DIN 65239-2006
| 航空航天.深沉孔、不浮動、帶角、耐腐蝕鋼制的MJ螺紋自鎖托板螺母.等級:1100MPa/315℃/425℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
|
| DIN 65240-2002
| 航空航天.自鎖浮動鋼制雙耳帶MJ螺紋深埋頭錨定螺母.分類:1100MPa/235℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C
|
| DIN 65242-2006
| 航空航天.帶深沉孔、浮動、雙耳、帶MJ螺紋的耐腐蝕鋼制自鎖托板螺母.等級:1100MPa/315℃/425℃
| Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
|
| DIN 65243-2002
| 航空航天.單耳浮動自鎖深埋頭帶MJ螺紋的鋼制錨定螺母.分類:1100MPa/235℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 °C
|
| DIN 65244-2006
| 航空航天.帶圓柱形深沉孔、浮動、單耳、帶MJ螺紋耐腐蝕鋼制自鎖托板螺母.等級:1100MPa/315℃/425℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
|
| DIN 65245-1984
| 航空和航天.鋼制、帶MJ螺紋的六角自鎖螺母.等級:1100MPa/120℃
| Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C
|
| DIN 65246-1984
| 航空和航天.鋼制、帶MJ螺紋、有槽/槽頂六角自鎖螺母.等級:1100MPa/120℃
| Aerospace; nuts, hexagon, slotted/castellated, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C
|
| DIN 65247-1989
| 航空航天.耐蝕鋼制MJ螺紋的薄型槽形/冠狀的六角頭螺母.等級:公稱抗拉強度110MPa/使用溫度425℃以下
| Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 °C
|
| DIN 65249-1987
| 航空航天.銅合金制的MJ螺紋自鎖六角頭螺母.等級:400MPa/120℃
| Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 °C
|
| DIN 65270-1992
| 航空航天.帶MJ螺紋的、開槽/槽頂開槽耐腐蝕鋼制自鎖螺母.等級:1100MPa/120℃
| Aerospace; nuts, hexagon, slotted/castellated, with MJ thread self-locking, corrosion-resisting steel; classification: 1100 MPa/120 °C
|
| DIN 65281-2005
| 航空航天系列.MJ螺紋、耐腐蝕鋼制薄型六角螺母.等級:1100MPa/315℃/425℃
| Aerospace series - Nuts, hexagon, thin, with MJ thread, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
|
| DIN 65342-2005
| 航空航天系列.耐腐蝕鋼制自鎖緊帶深沉孔、雙耳、縮徑、MJ螺紋地腳螺母.等級:1100MPa/315℃/425℃
| Aerospace series - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
|
| DIN 65343-2002
| 航空航天.雙耳減縮自鎖深埋頭帶MJ螺紋的鋼制錨定螺母.分類:1100MPa/235℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 °C
|
| DIN 65344-2005
| 航空航天.耐腐蝕鋼制帶深沉孔、雙耳、MJ螺紋自鎖緊地腳螺母.等級:1100MPa/315℃/425℃
| Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
|
| DIN 65345-1986
| 航空航天.帶圓柱形深沉孔、雙耳、具有MJ螺紋的鋼制自鎖托板螺母.等級:1100MPa/235℃
| Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 °C
|
| DIN 65346 Berichtigung 1-2007
| 航空航天系列.等級為:1100MPa/315℃/425℃、耐腐蝕鋼單耳自鎖深沉孔帶MJ螺紋的托板螺母.DIN 65346-2006技術
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C, Corrigenda to DIN 65346:2006-11
|
| DIN 65346-2006
| 航空航天.帶圓柱形深沉孔、單耳、帶MJ螺紋的耐腐蝕鋼制自鎖托板螺母.等級:1100MPa/315℃/425℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
|
| DIN 65347-2002
| 航空航天.單耳自鎖深埋頭帶MJ螺紋的鋼制錨定螺母.分類:1100MPa/235℃
| Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C
|
| DIN 65349-2001
| 航空航天.米制螺紋螺母和相關螺釘部件鎖扭矩試驗.試驗方法
| Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods
|
| DIN 65391-2002
| 航空航天.自鎖耐腐蝕鋼制帶MJ螺紋的加壓螺母.分類:1100MPa/315℃/435℃
| Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
|
| DIN 65392-2002
| 航空航天.浮動自鎖帶MJ螺紋的鋼制加壓螺母.分類:1100 MPa/235℃
| Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 °C
|
| DIN 65477-2003
| 航空航天.耐腐蝕鋼制自鎖緊封閉型壓緊螺母.等級:1100 MPa/315 鳦/425 鳦
| Aerospace - Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
|
| DIN 65480-1989
| 航空航天.帶凸緣和MJ螺紋耐腐蝕鋼制自鎖六角螺母.等級:1100MPa/315℃
| Aerospace; hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel; class: 1100 MPa/315 °C
|
| DIN 65500-1984
| 航空和航天.帶MJ螺紋鋁合金扁六角螺母
| Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy
|
| DIN 65501-2001
| 航空和航天.帶MJ螺紋鉚接螺母墊片
| Aerospace - Shims for anchor nuts with MJ-thread
|
| DIN 65505-2003
| 航空航天.自鎖、氣密、雙耳、鋼制帶MJ螺紋地腳螺母.等級900MPa、耐-55℃至+230℃空氣
| Aerospace - Anchor nuts, with MJ-thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, air resistant from -55 °C to 230 °C
|
| DIN 65507-1986
| 航空航天.帶附加墊圈和沉頭孔、自鎖、MJ螺紋的六角螺母.等級:1100MPa/235
| Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel; class: 1100 MPa/235 °C
|
| DIN 65508-1986
| 航空航天.帶凸緣墊片和埋頭孔、自鎖、耐腐蝕鋼帶MJ螺紋的六角螺母.等級:1100MPa/315℃/425℃
| Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel; class: 1100 MPa/315 °C/425 °C
|
| DIN 65509-1984
| 航空和航天.帶MJ螺紋、等級:1100MPa/235℃鋼制六角螺母
| Aerospace; nuts, hexagon, with MJ-thread, steel, class: 1100 MPa/235 °C
|
| DIN 65510-1984
| 航空和航天.帶MJ螺紋、等級:1100MPa/235℃鋼制扁六角螺母
| Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C
|
| DIN 65528-2005
| 航空航天系列.鋼制自鎖緊、帶深沉孔、凸緣和MJ螺紋的十二角螺母.等級:1550MPa/1800MPa/235℃
| Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1550 MPa/1800 MPa/235 °C
|
| DIN 65529-2005
| 航空航天系列.鋼制自鎖緊、帶深沉孔、凸緣和MJ螺紋的十二角螺母.等級:1250MPa/235℃
| Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1250 MPa/235 °C
|
| DIN 65530-2006
| 航空航天.耐腐蝕剛制自鎖緊深埋頭孔的帶凸緣和MJ螺紋的十二角螺母.等級:1550 MPa/315℃/425℃
| Aerospace - Nuts, bihexagonal with flange and MJ thread, deep counterbore, self-locking, corrosion-resisting steel, classification: 1550 MPa/315 °C/425 °C
|
| DIN 65531-2005
| 航空航天系列.耐腐蝕鋼制自鎖緊、帶深沉孔、凸緣和MJ螺紋的十二角螺母.等級:1250 MPa/315 鳦/425 鳦
| Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting, steel, class: 1250 MPa/315 °C/425 °C
|
| DIN 65533-1987
| 航空航天.螺栓、螺釘和螺母.材料的分配及表面處理.推薦性選擇
| Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
|
| DIN 65534-1992
| 航空航天.耐蝕鋼制MJ螺紋的六角頭螺母.等級:1100/650℃
| Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 °C
|
| DIN 65535-1986
| 航空航天.耐腐蝕鋼制帶MJ螺紋的自鎖螺母多槽螺母組件.螺母間距為固定的或可選的.等級:1100MPa/315℃
| Aerospace; gang channel nut assembly, with self-locking nuts with MJ thread, nut spacing fixed or optional, in corrosion-resisting steel; class: 1100 MPa/315 °C
|
| DIN 65546-2005
| 航空航天系列.耐腐蝕鋼制自鎖緊、帶深沉孔、凸緣和MJ螺紋的十二角螺母.等級:1100 MPa/315 鳦/425 鳦
| Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting steel, class: 1100 MPa/315 °C/425 °C
|
| DIN 65553-2001
| 航空航天.MJ螺紋鉚接螺母用無孔金屬墊片，不適用于新設計
| Aerospace - Shims, without hole, for anchor nuts with MJ thread; Not to be used for new designs
|
| DIN 6796-1987
| 螺栓和螺母用螺旋彈簧墊圈
| Conical spring washers for bolt/nut assemblies
|
| DIN 69051-5-2002
| 機床.球形螺釘.第5部分:球形螺母的安裝尺寸
| Machine tools - Ball screws - Part 5: Mounting dimensions for ball nuts
|
| DIN 69895-2006
| HSK中央冷卻供應.DIN 69893-5的E類和DIN 69893-1的A類的錐形空心柄的螺紋螺母冷卻管.尺寸
| Central coolant supply for HSK - Coolant pipe with threaded nut for hollow taper shanks, type A according to DIN 69893-1 and type E according to DIN 69893-5 - Dimensions
|
| DIN 70615-1990
| 汽車工程用的帶小寬度對邊的六角螺母(不準備用于新設計)
| Hexagon nuts with small widths across flats for use in automotive engineering (not intended for new designs)
|
| DIN 70616-1990
| 汽車制造.帶小開口度的扁六角螺母(不適于新設計)
| Hexagon thin nuts with small widths across flats for use in automotive engineering (not intended or new designs)
|
| DIN 70617-1990
| 汽車制造工業用帶寬度對邊的六角頭開槽螺母(不適于新設計)
| Hexagon slotted nuts with small widths across flats for use in automotive engineering (not intended for new designs)
|
| DIN 70618-1990
| 汽車制造.帶小開口度的扁冠狀螺母(不適于新設計)
| Hexagon thin slotted nuts with small widths across flats for use in automotive engineering (not intended for new designs)
|
| DIN 70810-1-1971
| 第1部分:開口型方形螺母用螺母夾具
| Nut holders for square nuts, open type
|
| DIN 70810-2-1971
| 第2部分:封閉型方形螺母用螺母夾具
| Nut holders for square nuts, closed type
|
| DIN 70852-1989
| 開槽螺母.尺寸
| Groove nuts; dimensions
|
| DIN 70952-1976
| DIN 70852 開槽螺母的鎖緊片
| Locking plates for groove nuts DIN 70852
|
| DIN 71428-1989
| 橢圓形壓接連接的管接頭.用聯管螺母連接的圓柱形螺紋旋入連接管
| Compression couplings with olives; cylindrical thread nipples for use with union nuts
|
| DIN 71429-1989
| 橢圓形壓接連接的管接頭.用聯螺母連接的悶頭壓接聯接器的小螺柱和肘節管接頭
| Compression couplings with olives; bulkhead compression couplings small stud and elbow fittings for use with union nuts
|
| DIN 71430-1989
| 橢圓形壓接連接的管接頭.用聯管螺母旋轉連的管接頭
| Compression couplings with olives; swiveling fittings for use with union nuts
|
| DIN 71433-1989
| 橢圓形壓接連接的管接頭.用聯螺母連接的的三通管接頭和肘節管接頭
| Compression couplings with olives; T-fittings and elbow fittings for use with union nuts
|
| DIN 74233-2-1991
| 液壓制動系統.制動管道配件.第2部分:制動管道管接螺母
| Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes
|
| DIN 7968-2007
| 鋼結構用帶六角螺母的六角頭配合螺栓
| Hexagon fit bolts with hexagon nut for steel structures
|
| DIN 7969-2007
| 鋼結構用帶六角螺母的帶槽沉頭螺栓
| Slotted countersunk head bolts with hexagon nut for steel structures
|
| DIN 7990-2007
| 鋼結構用帶六角螺母的六角頭螺栓
| Hexagon head bolts with hexagon nut for steel structures
|
| DIN 806-1971
| 無拔出器螺母的60°車床頂尖
| 60° lathe centres without extractor nut
|
| DIN 8063-4-1983
| 未增塑聚氯乙烯壓力管道用管連接組件和接頭.內外螺母、法蘭盤、密封件.尺寸
| Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
|
| DIN 807-1966
| 帶拔出器螺母的60°車床頂尖
| Lathe centres 60° with extractor nut
|
| DIN 80701-1991
| 肘節螺母
| Toggle nuts
|
| DIN 80704-1968
| 弓形螺母.米制螺紋
| Bow Nuts; Metric Screw Thread
|
| DIN 80705-1990
| 帶小開口度、粗牙螺紋和細牙螺紋的扁螺母
| Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
|
| DIN 82013-1976
| 圓螺母
| Round Nuts
|
| DIN 8537-1970
| 氣動工具.錐形噴氣管嘴、連接螺母、連接管
| Pneumatic tools; cone nozzle tips, connection nuts, connection nipples
|
| DIN 86056-2001
| 鋼管和銅或銅合金管用鎖緊螺母和密封圈的引入管套筒
| Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
|
| DIN 8912-1990
| 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭用的接頭螺母和螺紋堵塞
| Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems
|
| DIN 898-1995
| 螺釘和螺母的裝配工具.概述、術語和定義
| Assembly tools for screws and nuts - Survey, terms and definitions
|
| DIN 917-2000
| 低型六角頭蓋螺母
| Hexagon cap nuts, low type
|
| DIN 928-2000
| 方形焊接螺母
| Square weld nuts
|
| DIN 929-2000
| 六角焊接螺母
| Hexagon weld nuts
|
| DIN 935-1-2000
| 六角開槽螺母和槽形螺母.第1部分:米制粗牙和細牙螺紋.產品等級A和B
| Hexagon slotted and castle nuts - Part 1: Metric coarse and fine pitch thread; Product grades A and B
|
| DIN 935-3-2000
| 六角開槽螺母.第3部分:米制粗牙螺紋.產品等級C
| Hexagon slotted nuts - Part 3: Metric coarse pitch thread; Product grade C
|
| DIN 962-2001
| 螺栓、螺釘、雙頭螺栓和螺母.標識、型號和精整
| Bolts, screws, studs and nuts - Designation, types and finishes
|
| DIN 974-2-1991
| 六角螺栓、螺釘和螺母用沉頭孔直徑.制造尺寸
| Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
|
| DIN 979-2000
| 六角開槽薄螺母和槽形螺母.米制粗牙和細牙螺紋.產品等級A和B
| Hexagon thin slotted and castle nuts - Metric coarse and fine pitch thread - Product grades A and B
|
| DIN 981-1993
| 滾動軸承.鎖緊螺母
| Rolling bearings; locknuts
|
| DIN 986-2000
| 帶非金屬嵌件的長規扭矩式六角蓋螺母
| Prevailing torque type hexagon domed cap nuts with non-metallic insert
|
| DIN 987-1960
| 鋼芯帶鉚接凸緣自鎖螺母
| Plate nuts with steel core, self-locking
|
| DIN EN 14218-2003
| 六角法蘭面螺母.細牙螺紋
| Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified); German version EN 14218:2003
|
| DIN EN 14399-3-2006
| 預加負荷用高強度結構螺栓組件.第3部分:系統HR.六角螺栓和螺母組件
| High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies English version of DIN EN 14399-3:2006-06
|
| DIN EN 14399-4-2006
| 預加負荷用高強度結構螺栓組件.第4部分:系統HV.六角螺栓和螺母組件
| High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies English version of DIN EN 14399-4:2006-06
|
| DIN EN 1661-1998
| 帶法蘭的六角螺母
| Hexagon nuts with flange (ISO/DIS 4161:1996, modified); German version EN 1661:1997
|
| DIN EN 1663-1998
| 帶有法蘭的經常施用扭矩型六角螺母(帶非金屬鑲嵌件)
| Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified); German version EN 1663:1997
|
| DIN EN 1664-1998
| 經常施用扭矩型帶法蘭的全金屬六角螺母
| Prevailing torque type - All-metal hexagon nuts with flange (ISO 7044:1997, modified); German version EN 1664:1997
|
| DIN EN 1666-1998
| 米制小螺距螺紋的帶法蘭(帶有非金屬鑲嵌件)的經常作用的扭矩型六角頭螺母
| Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125:1997, modified); German version EN 1666:1997
|
| DIN EN 1667-1998
| 米制小螺距螺紋的帶法蘭的經常作用的扭矩型全六角頭螺母
| Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread (ISO 12126:1997, modified); German version EN 1667:1997
|
| DIN EN 20225-1992
| 緊固件.螺釘、螺柱和螺母.尺寸符號和標示(ISO 225-83)
| Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
|
| DIN EN 20898-2-1994
| 緊固件的機械性能.第2部分:有規定檢驗載荷值的螺母.粗牙螺紋
| Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993
|
| DIN EN 2264-1996
| 航空航天系列.合金鋼鍍鎘MoS2潤滑帶各種深度圓柱形沉頭孔雙面法蘭活動式自鎖鉚接螺母.等級:900MPa(室溫)/23
| Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996
|
| DIN EN 2647-2007
| 航空航天系列.鍍隔合金鋼加 MoS<下標2> 潤滑劑的球形座自鎖六角螺母.等級:900MPa(環境溫度)/235℃
| Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2647:2006
|
| DIN EN 2680-2007
| 航空和航天系列.米制系列MOS2潤滑的鈍化鍍鎘合金鋼雙耳自準、鎖緊浮動地腳螺母.等級:900MPa/235℃
| Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006
|
| DIN EN 2752-1990
| 航空航天.帶圓柱形劃孔雙面截短法蘭自鎖式鉚接螺母.等級1100MPa/223℃
| Aerospace; nuts, anchor, self locking, fixed, two lug, reduced series, with counterbore; classification: 1100 MPa/235 °C; german version EN 2752:1989
|
| DIN EN 2753-1996
| 航空航天系列.合金鋼鍍鎘MoS(角注2)潤滑帶圓柱形沉頭孔單面法蘭自鎖鉚接螺母.等級 1100MPa(室溫)/235℃
| Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996
|
| DIN EN 2809-2001
| 航空航天系列.耐熱鋼制鍍銀標稱對邊高度降低的槽頭/齒形頭六角螺母.等級:900MPa(室溫)/650℃; 德文版本 EN
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2809:2001
|
| DIN EN 2810-2001
| 航空航天系列.耐熱鋼制鈍化標稱對邊高度降低的槽頭/齒形頭六角螺母.等級:900MPa(室溫)/650℃; 德文版本 EN
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2810:2001
|
| DIN EN 2856-2007
| 航空和航天系列.自鎖固定式銳角縮徑有沉孔的地腳螺母.分類:1100MPa/235℃
| Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 °C; German and English version EN 2856:2006
|
| DIN EN 2881-2007
| 航空和航天系列.米制系列MOS2潤滑的鈍化耐腐蝕、耐燃鋼沉頭雙耳密封鎖緊浮動地腳螺母.等級:900MPa/120℃
| Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006
|
| DIN EN 28839-1991
| 緊固件的機械性能.有色金屬制造的螺栓、螺釘、螺柱和螺母
| Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
|
| DIN EN 2906-1994
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 自鎖十二角螺母.等級:1100 MPa (室溫) 攝氏 650 度; 德文版本 EN 2
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2906:1994
|
| DIN EN 2907-1995
| 航空航天系列.鍍銀耐高溫鋼FE-PA92HT(A286)自鎖十二角螺母.等級:1100MPa(室溫)/650℃; 德文版本 EN 2907:19
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2907:1995
|
| DIN EN 2908-1994
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 深埋頭孔自鎖十二角螺母.等級:1100 MPa 室溫)攝氏 650 度 ; 德文版
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2908:1994
|
| DIN EN 2909-1995
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 深沉孔自鎖鍍銀十二角螺母.等級:1100 MPa (室溫) 攝氏 650 度; 德
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2909:1995
|
| DIN EN 2910-1994
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 自鎖鉚釘體螺母.等級:1100 MPa (室溫) 攝氏 650 度; 德文版本 EN 2
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2910:1994
|
| DIN EN 2911-1995
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 自鎖鍍銀鉚釘體螺母.等級:1100 MPa (室溫) 攝氏 650 度; 德文版本
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2911:1995
|
| DIN EN 2997-4-1997
| 航空航天.工作溫度常數為175℃、200℃極值為260℃耐火或不耐火螺紋連接圓形電氣插接件.第4部分:帶鎖緊螺母
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 4: Jam-nut mounted receptacle; product standard; German version EN 2997-4:1997
|
| DIN EN 2997-6-1997
| 航空航天.工作溫度常數為175℃、200℃極值為260℃耐火或不耐火螺紋連接圓形電氣插接件.第6部分:帶鎖緊螺母
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German version EN 2997-6:1997
|
| DIN EN 3004-1997
| 航空航天系列.耐高溫鋼FE-PA2601(A286)MJ螺紋自鎖螺母.等級:1100MPa/650℃.交貨技術條件
| Aerospace series - Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997
|
| DIN EN 3005-2005
| 航空航天系列.鍍銀或未涂覆的耐熱鎳基合金NI-PH1302制MJ螺紋自鎖緊螺母.等級:1210 MPa(室溫)/730 鳦.技術規
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 °C - Technical specification; German and English version EN 3005:2004
|
| DIN EN 3012-1995
| 航空航天系列.耐高溫鎳基合金HI-P101HT自鎖十二角螺母.等級:1210Mpa(室溫)/730℃; 德文版本 EN 3012:1995
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995
|
| DIN EN 3013-1995
| 航空航天系列.鍍銀耐高溫鎳基合金(NI-P101HT)自鎖十二角螺母.等級:1210MPa(室溫下)/730℃; 德文版本 EN 301
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3013:1995
|
| DIN EN 3014-2001
| 航空航天系列.耐熱鋼FE-PA2601(A286)制鋸齒形自鎖緊帶柄螺母.等級:1100MPa(室溫)/650℃; 德文版本 EN 3014:
| Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3014:2001
|
| DIN EN 3015-2001
| 航空航天系列.耐熱鋼FE-PA2601(A286)制鋸齒形鍍銀自鎖緊帶柄螺母.等級:1100MPa(室溫)/650℃; 德文版本 EN 3
| Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3015:2001
|
| DIN EN 3064-1996
| 航空航天系列.鋸齒形自鎖鉚接螺母.安裝程序
| Aerospace series - Shank nuts, self-locking, serrated - Installation procedure; German version EN 3064:1996
|
| DIN EN 3065-1996
| 航空航天系列.自鎖嚙合鉚接螺母安裝孔.設計標準
| Aerospace series - Installation holes for self-locking, serrated shank nuts; design Standard; German version EN 3065:1996
|
| DIN EN 3080-2007
| 航空航天系列.鈦合金8°30'管接頭.帶有推力線螺母的縮短三通
| Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006
|
| DIN EN 3149-1996
| 航空航天系列.鉚接螺母.60度擴徑安裝孔法蘭.設計標準
| Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996
|
| DIN EN 3152-2005
| 航空航天系列.鍍銀或未涂覆的耐熱鋼FE-PA2601 (A286)制MJ螺紋自鎖緊螺母.等級:1100 MPa(室溫)/425 鳦.技術
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification; German and English version EN 3152:2004
|
| DIN EN 3196-1994
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 鍍銀自鎖六角頭螺母.等級:1100 MPa (室溫)攝氏 425 度; 德文版本 E
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3196:1994
|
| DIN EN 3230-2001
| 航空航天系列.鋼制鍍鎘標稱對邊高度降低的槽頭/齒形頭六角螺母.等級:900MPa(室溫)/235℃; 德文版本 EN 3230
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3230:2001
|
| DIN EN 3239-1995
| 航空航天系列.鍍銀螺紋耐高溫鎳基合金NI-P101HT(沃斯帕洛尹合金)自鎖十二角螺母.等級:1210MPa(室溫)/730℃;
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 °C; German version EN 3239:1995
|
| DIN EN 3264-2002
| 航空航天系列.鈦合金8°30'管連接件.推力金屬絲螺母; 德文版本 EN 3264:2001
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Thrust wire nuts; German version EN 3264:2001
|
| DIN EN 3266-2002
| 航空航天系列.鈦合金管連接件.悶頭螺母; 德文版本 EN 3266:2001
| Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut; German version EN 3266:2001
|
| DIN EN 3377-1996
| 航空航天系列.高溫鋼FE-PA92HT(A286)自鎖六角螺母.等級:1100 MPa(室溫下)/425℃
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3377:1996
|
| DIN EN 3379-1996
| 航空航天系列.高溫鎳基合金NI-P101HT(沃斯帕落伊合金)厚螺母用中螺紋十二角配合螺栓.等級:1210 MPa(室溫)/7
| Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996
|
| DIN EN 3536-2007
| 航空航天系列.MoS<(指數)2>潤滑的自鎖耐熱鋼六角螺母.等級:1100MPa(室溫)/315℃
| Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006
|
| DIN EN 3626-2007
| 航空航天系列.MoS<(指數)2>潤滑的鍍鎘鋼制自鎖六角螺母.等級:1100MPa(室溫)/235℃
| Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006
|
| DIN EN 3646-004-2007
| 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第004部分:鎖緊螺母安裝插座.產品標準
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard; German and English version EN 3646-004:2006
|
| DIN EN 3646-006-2007
| 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第006部分:鎖緊螺母安裝密封插座.產品
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard; German and English version EN 3646-006:2006
|
| DIN EN 3660-003-2007
| 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.第003部分:EN 2997和EN 4067中A型穿孔螺母.產品標準
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard; German and English version EN 3660-003:2006
|
| DIN EN 3712-2007
| 航空航天系列.MoS2潤滑的鍍鎘鋼制沉孔縮徑固定式單耳自鎖緊系緊螺母.分類:1100MPa(室溫)/235℃
| Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3712:2007
|
| DIN EN 3720-1995
| 航空航天系列.加 MoS<下標2> 涂層的耐高溫鋼 FE-PA92HT(A286) 自鎖十二角螺母.等級:1100 MPa (室溫)/425℃;
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3720:1995
|
| DIN EN 3721-1995
| 航空航天系列.加 MoS<下標2> 涂層的耐高溫鋼 FE-PA92HT(A286) 深沉孔自鎖十二角螺母.等級:1100 MPa (室溫)/
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3721:1995
|
| DIN EN 3722-1995
| 航空航天系列.加 MoS<下標2> 涂層的耐高溫鋼FE-PA92HT(A286)自鎖鉚釘體螺母.等級:1100MPa(室溫)/425℃; 德
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3722:1995
|
| DIN EN 3723-1996
| 航空航天系列.高溫鋼FE-PA92HT(A286)MoS2涂覆自鎖六角螺母.等級:1100 MPa(室溫下)/425℃
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3723:1996
|
| DIN EN 3726-2005
| 航空航天系列.MoS2耐熱鋼FE-PA2601 (A286)制自鎖緊夾緊螺母.強度等級:1100 MPa(室溫)/425鳦
| Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3726:2004
|
| DIN EN 3741-2005
| 航空航天系列.米制夾緊螺母.安裝孔及組件
| Aerospace series - Nuts, clip, metric - Installation holes and assembly; German and English version EN 3741:2004
|
| DIN EN 3752-2005
| 航空航天系列.MoS2涂覆的耐熱鋼FE-PA2601 (A286)制MJ螺紋自鎖緊螺母.等級:1100 MPa(室溫)/425 鳦.技術規范
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification; German and English version EN 3752:2004
|
| DIN EN 4011-2006
| 航空航天系列.十二角頭自鎖緊鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/600 °C
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4011:2004
|
| DIN EN 4012-2006
| 航空航天系列.NI-PH2601(鉻鎳鐵合金718)型耐熱鎳基合金制,鍍MoS<上標2>的自鎖、十二角螺母.分類:1550MPa(室
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS coated - Classification: 1550 MPa (at ambient temperature)/425 °C; German and English version EN 4012:2004
|
| DIN EN 4013-2006
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制鍍銀的自鎖緊帶柄螺母.等級:1550MPa(室溫)/600℃
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4013:2004
|
| DIN EN 4018-2002
| 航空航天系列.鈦合金管連接件 8°30'.帶止推金屬絲螺母的 90°彎頭; 德文版本 EN 4018:2001
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbow 90°, with thrust wire nut; German version EN 4018:2001
|
| DIN EN 4020-2006
| 航空航天系列. 8°30'鈦合金管接頭.帶推進線螺母的90°彎頭焊接端
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end with thrust wire nut; German and English version EN 4020:2001
|
| DIN EN 4024-2002
| 航空航天系列.鈦合金管連接件 8°30'.帶止推金屬絲螺母的焊接端 45°彎頭; 德文版本 EN 4024:2001
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 45°, welded end with thrust wire nut; German version EN 4024:2001
|
| DIN EN 4027-2002
| 航空航天系列.鈦合金管連接件 8°30'.帶止推金屬絲螺母的三通管分支; 德文版本 EN 4027:2001
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, branch, with thrust wire nut; German version EN 4027:2001
|
| DIN EN 4028-2006
| 航空航天系列.8°30'鈦合金管接頭.端部帶推進線螺母的三通
| Aerospace series - Pipe coupling 8°30′ in titanium alloy - Tees with thrust wire nut on run; German and English version EN 4028:2001
|
| DIN EN 4031-2002
| 航空航天系列.鈦合金管連接件 8°30'.焊接金屬箍用螺母; 德文版本 EN 4031:2001
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Nuts for welded ferrule; German version EN 4031:2001
|
| DIN EN 4047-2006
| 航空航天系列.鍍銀耐高溫鎳基合金NI-PH2601(鉻鎳鐵合金718)自鎖螺母.等級:1 550 MPa(室溫)/600℃.技術規范
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C - Technical specification; German and English version EN 4047:2004
|
| DIN EN 4048-2006
| 航空航天系列.NI-PH2601(鉻鎳鐵合金718)耐熱鎳基合金制MJ螺紋自鎖緊的鍍銀螺母.分類:1550MPa(室溫)/425 ℃
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1550 MPa (at ambient temperature) / 425 °C - Technical specification; German and English version EN 4048:2004
|
| DIN EN 4069-1996
| 航空航天系列.鈍化耐高溫鋼制小板手開口度平面六角螺母.等級:600MPa(室溫)/650℃
| Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996
|
| DIN EN 4116-2006
| 航空航天系列.耐熱鋼FE-PA2601 (A286)制自鎖、螺紋鍍銀的六角螺母.等級:1100MPa(室溫)/425℃
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4116:2004
|
| DIN EN 4117-2006
| 航空航天系列.十二角頭自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/ 60
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1550 MPa (at ambient temperature) / 600 °C; German and English version EN 4117:2004
|
| DIN EN 4118-2006
| 航空航天系列.螺紋鍍銀的耐熱鋼FE-PA2601 (A286)制雙六角頭自鎖螺母.等級：1100MPa(室溫)/ 650 °C
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4118:2004
|
| DIN EN 4119-2006
| 航空航天系列.螺紋上鍍銀的耐熱鋼FE-PA2601 (A286)制深沉頭孔自鎖緊十二角螺母.等級:1100 MPa(室溫)/650 °
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4119:2004
|
| DIN EN 4120-2006
| 十二角、自鎖緊、NI-PH1302耐熱鎳基合金(沃斯帕洛尹合金)、螺紋鍍銀的螺母.分類:1210MPa(環境溫度下)/730
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread - Classification: 1210 MPa (at ambient temperature)/730 °C; German and English version EN 4120:2004
|
| DIN EN 4121-2006
| 航空航天系列.螺紋上鍍銀的耐熱鋼FE-PA2601(A286)制自鎖緊、鋸齒狀帶柄螺母.等級:1100MPa(環境溫度)/650℃
| Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 4121:2004
|
| DIN EN 4122-2006
| 航空航天系列.螺紋鍍銀的耐熱鋼FE-PA2601(A286)制自鎖緊帶柄螺母.等級:1100MPa(室溫)/650℃
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 4122:2004
|
| DIN EN 4123-2006
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制鍍銀的自鎖緊帶柄螺母.等級:1550MPa(室溫)/600℃
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4123:2004
|
| DIN EN 4124-2006
| 航空航天系列.耐熱鎳基合金NI-PH1302(沃斯帕洛尹合金)制60°連接模鍍銀的自鎖緊帶柄螺母.等級:1210MPa(室溫
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1210 MPa (at ambient temperature) / 730 °C; German and English version EN 4124:2004
|
| DIN EN 4590-2007
| 航空航天系列.耐腐蝕鋼制鈍化、自鎖圓柱形螺母用、彈性金屬片固定器
| Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated; German and English version EN 4590:2005
|
| DIN EN 4591-2007
| 航空航天系列.MoS2潤滑的耐高溫鎳基合金不固定式自準自鎖緊圓筒螺母.分類:1550MPa(室溫)/315℃
| Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS<(Index)2> lubricated - Classification: 1550 MPa (at ambient temperature)/315 °C; German and English version EN 4591:2005
|
| DIN EN 4610-2007
| 航空航天系列.鈦合金8°30'管連接件.帶有推力線螺母的45°彎頭
| Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut; German and English version EN 4610:2005
|
| DIN EN ISO 10484-2004
| 螺母的擴孔試驗
| Widening test on nuts (ISO 10484:1997); German version EN ISO 10484:2004
|
| DIN EN ISO 10485-2004
| 螺母的錐形保證載荷試驗
| Cone proof load test on nuts (ISO 10485:1991); German version EN ISO 10485:2004
|
| DIN EN ISO 10511-1998
| 經常作用的扭矩型六角薄型螺母(帶非金屬墊片)
| Prevailing torque type hexagon, thin nuts (with non-metallic insert) (ISO 10511:1997); German version EN ISO 10511:1997
|
| DIN EN ISO 10512-1998
| 公制小螺距螺紋的1型經常作用的扭矩型六角頭螺母六角螺母(帶非金屬墊片).特性等級6,8和10
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:1997); German version EN ISO 10512:1997
|
| DIN EN ISO 10513-1998
| 公制細螺距螺紋的2型經常施用扭矩型全金屬六角頭螺母. 8,10 和 12 級特性
| Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:1997); German version EN ISO 10513:1997
|
| DIN EN ISO 21670-2004
| 帶法蘭的六角頭螺母
| Hexagon weld nuts with flange (ISO 21670:2003); German version EN ISO 21670:2003
|
| DIN EN ISO 2320-1998
| 經常作用的扭矩式鋼制六角螺母.機械和功能特性
| Prevailing torque type steel hexagon nuts - Mechanical and performance properties (ISO 2320:1997); German version EN ISO 2320:1997
|
| DIN EN ISO 3506-2-1998
| 耐蝕鋼緊固件的機械特性.第2部分:螺母
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997
|
| DIN EN ISO 4032-2001
| 1型六角螺母.產品等級A和B
| Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999); German version EN ISO 4032:2000
|
| DIN EN ISO 4033-2001
| 2型六角螺母.產品等級A和B
| Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999); German version EN ISO 4033:2000
|
| DIN EN ISO 4034-2001
| 六角螺母.產品等級C
| Hexagon nuts - Product grade C (ISO 4034:1999); German version EN ISO 4034:2000
|
| DIN EN ISO 4035-2001
| 六角薄螺母(倒角).產品等級A和B
| Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999); German version EN ISO 4035:2000
|
| DIN EN ISO 4036-2001
| 六角薄螺母(不倒角).產品等級B
| Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999); German version EN ISO 4036:2000
|
| DIN EN ISO 4759-1-2001
| 緊固件公差.第1部分:螺栓、螺釘和墊圈和螺母.產品等級A、B和C
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
|
| DIN EN ISO 4759-3-2000
| 緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.產品等級A和C
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
|
| DIN EN ISO 6157-2-2004
| 緊固件.表面缺陷.第2部分:螺母
| Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
|
| DIN EN ISO 6789-2003
| 螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003); German version EN ISO 6789:2003
|
| DIN EN ISO 7040-1998
| 1型經常作用的扭矩型六角螺母(用非金屬墊圈).性能等級5,8和10
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997); German version EN ISO 7040:1997
|
| DIN EN ISO 7042-1998
| 2型經常作用的扭矩型六角螺母(用全金屬螺母).性能等級5,8,10和12
| Prevailing torque type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 (ISO 7042:1997); German version EN ISO 7042:1997
|
| DIN EN ISO 7719-1998
| 1型經常作用的扭矩型六角螺母(全金屬螺母). 性能等級5,8和10
| Prevailing torque type (all-metal hexagon nuts), style 1 - Property classes 5, 8 and 10 (ISO 7719:1997); German version EN ISO 7719:1997
|
| DIN EN ISO 8673-2001
| 米制細牙螺紋1型六角螺母.產品等級A和B
| Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999); German version EN ISO 8673:2000
|
| DIN EN ISO 8674-2001
| 米制細牙螺紋2型六角螺母.產品等級A和B
| Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999); German version EN ISO 8674:2000
|
| DIN EN ISO 8675-2001
| 米制細牙螺紋六角薄螺母(倒角).產品等級A和B
| Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000
|
| DIN EN ISO 887-2006
| 通用米制螺栓、螺釘和螺母用的平墊圈.一般示意圖(ISO 887:2000 + Cor. 1:2006)
| Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07
|
| DIN EN ISO 898-6-1996
| 緊固件機械性能.第6部分:帶規定試驗負荷的螺母.細牙螺紋
| Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995
|
| DIN ISO 1085-2007
| 螺釘和螺母用裝配工具.雙頭扳手.尺寸組配
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing (ISO 1085:1999) English version of DIN ISO 1085:2007-04
|
| DIN ISO 10897-2006
| 刀具夾用1:10錐度的夾頭.夾頭、夾柄和螺母
| Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (ISO 10897:1996)
|
| DIN ISO 13754-2000
| 紡織機械和附件.紡紗和加捻錠子用六角螺母和開槽螺母
| Textiles machinery and accessories - Hexagon nuts and slotted nuts for spinning and twisting spindles (ISO 13754:1999)
|
| DIN ISO 14710-1999
| 農用機械和拖拉機.作物保護設備.空氣輔助的噴灑器.噴嘴旋轉螺母的尺寸
| Agricultural machinery and tractors - Equipment for crop protection - Air-assisted sprayers; dimensions of nozzle swivel-nuts (ISO 14710:1996)
|
| DIN ISO 15488-2006
| 刀具柄用8°調整角的夾頭.夾頭、螺母和配合尺寸
| Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003)
|
| DIN ISO 1711-1-2007
| 螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒(ISO 1711-1-2007)
| Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2007)
|
| DIN ISO 1891-1979
| 緊固件.螺栓、螺釘、螺母和附件.術語和名稱
| Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
|
| DIN ISO 2351-1-2007
| 螺釘和螺母用裝配工具.電動螺絲起子.第1部分:一字槽螺絲用螺絲起子
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
|
| DIN ISO 2351-2-2006
| 螺絲和螺母用裝配工具.機器操作旋具頭.第2部分:十字凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
|
| DIN ISO 2351-3-2006
| 螺絲和螺母用裝配工具.機器操作旋具頭.第3部分:六角凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
|
| DIN ISO 2380-1-2006
| 螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第1部分:手動或者機動旋具工作部
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004)
|
| DIN ISO 2380-2-2006
| 螺絲和螺母用裝配工具.一字槽螺釘?shù)男?第2部分:手動旋具的一般要求、刀刃長度和標記
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
|
| DIN ISO 262-1999
| ISO一般用途米制螺紋.螺釘、螺栓和螺母的選用尺寸（ISO 262-
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
|
| DIN ISO 2936-2001
| 螺釘和螺母用裝配工具.內六角螺釘扳手
| Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2001)
|
| DIN ISO 5855-2-1989
| 航空航天.MJ螺紋.第2部分:螺栓和螺母的極限尺寸; 等同采用 ISO 5855-2:1988
| Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988
|
| DIN ISO 691-2007
| 螺栓和螺母用裝配工具.扳手和套筒扳手開口.通用公差
| Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005) English version of DIN ISO 691:2007-04
|
| DIN ISO 8764-1-2006
| 螺釘和螺母用裝配工具.十字槽頭螺釘用旋具.第1部分:驅動頭
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips (ISO 8764-1:2004)
|
| DIN ISO 8764-2-2006
| 螺絲和螺母用裝配工具.十字槽頭螺釘用旋具.第2部分:手動旋具的一般要求、刀刃長度和標記
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
|
| DIN ISO 8788-1988
| 航空航天.緊固件.螺母的形狀和位置公差
| Aerospace; fasteners; tolerances of form and position for nuts; identical with ISO 8788, edition 1987
|
| DIN ISO 8992-2005
| 緊固件.螺栓、螺釘、螺柱和螺母的一般要求
| Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
|
| DIN V 4001-206-1991
| 計算機輔助設計標準件文檔.第206部分:幾何和參數規范.用特殊工具驅動的獨立螺母
| CAD standard parts file; specification of geometry and parameters; nuts, separate, drive with special-tool
|
| DIN V 4001-29-1989
| 計算機輔助設計標準件文檔.第29部分:幾何和參數規范.用工具驅動的獨立螺母
| CAD standard parts file; specifications of geometry and parameters; nuts, separate, with drive by tool
|
| DIN V 65900-15-1999
| 航空航天系列.溫度等級≤425℃用自鎖螺母,螺紋鑲嵌件的材料
| Aerospace series - Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes 425 °C (AECMA Technical Report TR 3791:1999)
|
| DIN V 65900-16-1998
| 航空航天系列.用塑料環自鎖的帶槽普通六角頭螺母的材料
| Aerospace series - Materials for plain, slotted and self-locking by plastic ring hexagonal nuts (AECMA Technical Report TR 3823:1998)
|
| DIN V 65900-18-2001
| 航空航天.雙六角自鎖螺母.技術規范扭矩.基本計算
| Aerospace series - Nuts, bihexagonal, self-locking - Torque for technical specifications - Basic calculations (AECMA Technical Report TR 4597:2000)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|