| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2782-10 Method 1006-1978 | 塑料試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1006:合成樹脂浸漬玻璃纖維織物中揮發物和樹脂含量測定 | Methods of testing plastics - Glass reinforced plastics - Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric |
| BS 2782-4 Method 432A-1991 | 塑料試驗方法.第4部分:化學性能.試驗方法432A:不飽和聚酯樹脂基增強塑料殘余苯乙烯單體含量測定 | Methods of testing plastics - Chemical properties - Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins |
| BS 2782-4 Method 432D-1995 | 塑料試驗方法.第4部分:化學性能.試驗方法432D:不飽和聚酯樹脂蒸發苯值測定 | Methods of testing plastics - Chemical properties - Determination of styrene evaporation from unsaturated polyester resins |
| BS 2782-4 Method 433A-1979 | 塑料試驗方法.第4部分:化學性能.試驗方法433A:環氧樹脂與縮水甘油脂無機氯測定 | Methods of testing plastics - Chemical properties - Determination of inorganic chlorine in epoxide resins and glycidyl esters |
| BS 2782-6 Method 621D-1978 | 塑料試驗方法.第6部分:尺寸特性.聚氯乙烯樹脂壓實表觀體積密度測定 | Methods of testing plastics - Dimensional properties - Determination of compacted apparent bulk density of PVC resins |
| BS 2782-7 Method 721A-1988 | 塑料試驗方法. 第7部分:流變性能.試驗方法721A:樹脂浸漬玻璃纖維測定樹脂流失量 | Methods of testing plastics - Rheological properties - Determination of resin flow from resin impregnated glass fabric |
| BS 2782-8 Method 835A-1980 | 塑料的試驗方法.其他特性.酚醛樹脂膠凝時間的測定 | Methods of testing plastics - Other properties - Determination of gelation time of phenolic resins |
| BS 2782-8 Method 835B-1980 | 塑料的試驗方法.其他特性.聚酯樹脂膠凝時間的測定(手工方法) | Methods of testing plastics - Other properties - Determination of gelation time of polyester resins (manual method) |
| BS 2782-8 Method 835D-1980 | 塑料試驗方法.第8部分:其他性能.試驗方法835D:用熱板測定熱固性樹脂膠凝時間 | Methods of testing plastics - Other properties - Determination of gelation time of thermosetting resins using a hot plate |
| BS 3396-3-1987 | 塑料增強用機織玻璃纖維織物.第3部分:聚酯樹脂系統用成品布規范 | Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems |
| BS 3532-1990 | 絕緣不飽和聚酯樹脂系的規范方法 | Method of specifying unsaturated polyester resin systems |
| BS 3749-1991 | 聚酯和環氧樹脂裝置增強用的E形玻璃纖維粗紗織物規范 | Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems |
| BS 3816-1989 | 電源頻率的電氣絕緣用環氧樹脂澆鑄系統規范 | Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies |
| BS 3953-1990 | 合成樹脂粘結的機織玻璃纖維布層壓板規范 | Specification for synthetic resin bonded woven glass fabric laminated sheet |
| BS 4154-1-1985 | 熱固性聚酯樹脂半透明玻璃纖維增強塑料波紋板.第1部分:材料和性能要求規范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for material and performance requirements |
| BS 4154-2-1985 | 熱固性聚酯樹脂半透明玻璃纖維增強塑料波紋板.第2部分:外形和尺寸規范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for profiles and dimensions |
| BS 4549-1-1997 | 增強塑料模塑件質量控制要求槽則.第1部分:玻璃纖維增強聚酯樹脂模塑件質量控制方案制定指南 | Guide to quality control requirements for reinforced plastics mouldings - Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings |
| BS 5664-2.2-1988 | 電絕緣用不溶聚合樹脂化合物.試驗方法.涂覆粉末 | Solventless polymerisable resinous compounds used for electrical insulation - Methods of test - Coating powders |
| BS 5664-3.11-1995 | 電絕緣不溶可聚合樹脂化合物.第3部分:各型材料規范.第11節:環氧樹脂基涂層粉末 | Solventless polymerisable resinous compounds used for electrical insulation - Specification for individual materials - Epoxy resin-based coating powders |
| BS 5689-3.2-1995 | 電工用浸漆織物.第3部分:各型材料規范.第2節:用環氧樹脂、聚氨基甲酸乙酯、有機硅樹脂、聚酯、瀝青或油性樹 | Varnished fabrics for electrical purposes - Specifications for individual materials - Glass fabric based varnished fabrics with epoxy, polyurethane, silicone, polyester, bituminous or oleoresinous varnish |
| BS 5X 17-1998 | 航空航天用油基樹脂清漆規范 | Specification for oleoresinous varnish for aerospace purposes |
| BS 6319-1-1983 | 建筑用合成樹脂膠料試驗.第1部分:試驗樣品制備方法 | Testing of resin and polymer/cement compositions for use in construction - Method for preparation of test specimens |
| BS 6319-10-1987 | 建筑用合成樹脂膠料試驗..第10部分:撓曲應力作用下反射溫度測量方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement of temperature of deflection under a bending stress |
| BS 6319-11-1993 | 建筑用樹脂和聚合膠料成分測試.第11部分:壓縮和拉伸塑性變形測定方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for determination of creep in compression and in tension |
| BS 6319-12-1992 | 建筑用樹脂和聚合膠料成分測試.第12部分:熱膨脹系數和無限制線性收縮量測量方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion |
| BS 6319-2-1983 | 建筑用合成樹脂膠料試驗.第2部分:抗壓強度測量方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement of compressive strength |
| BS 6319-3-1990 | 建筑用合成樹脂膠料試驗.第3部分:撓曲和撓曲強度彈性模量測量方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength |
| BS 6319-5-1984 | 建筑用合成樹脂膠料試驗.第5部分:固化合成樹脂成分密度測定方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for determination of density of hardened resin compositions |
| BS 6319-6-1984 | 建筑用合成樹脂膠料試驗.第6部分:壓縮彈性模數測定方法 | Testing of resin and polymer/cement compositions for use in construction - Method for determination of modulus of elasticity in compression |
| BS 6319-7-1985 | 建筑用合成樹脂膠料試驗.第7部分:拉伸強度測試方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement of tensile strength |
| BS 6319-8-1984 | 建筑用合成樹脂膠料試驗.第8部分:耐液體性評定方法 | Testing of resin and polymer/cement compositions for use in construction - Method for the assessment of resistance to liquids |
| BS 6319-9-1987 | 建筑用合成樹脂膠料試驗..第9部分:最大放熱溫度分類和測量方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement and classification of peak exotherm temperature |
| BS 6374-3-1984 | 加工工業用聚合材料設備襯套.第3部分:烘干熱固性樹脂襯套規范 | Lining of equipment with polymeric materials for the process industries - Specification for lining with stoved thermosetting resins |
| BS 6374-4-1984 | 加工工業用聚合材料設備襯套.第4部分:冷固化處理的熱固性樹脂制襯套規范 | Lining of equipment with polymeric materials for the process industries - Specification for lining with cold curing thermosetting resins |
| BS 6747-1987 | 聚丙烯酸酯制樹脂規范 | Specification for orthodontic resins |
| BS 6782-10-1998 | 涂料粘合劑.聚二異氰酸酯樹脂單體二異氰酸鹽的測定 | Binders for paints - Determination of monomeric diisocyanates in polyisocyanate resins |
| BS 6782-13-1998 | 涂料粘合劑.氯化聚二異氰酸鹽酯樹脂試驗的一般方法 | Binders for paints. General methods of test for chlorinated polymerization resins |
| BS 6782-16.1-2000 | 涂料用粘合劑.醇酸樹脂的試驗方法.常規方法 | Binders for paints - Methods of test for alkyd resins - General methods |
| BS 6782-16.2-2000 | 涂料用粘合劑.醇酸樹脂的試驗方法.鄰苯二甲酸酐含量的測定 | Binders for paints - Methods of test for alkyd resins - Determination of phthalic anhydride content |
| BS 6782-16.3-2000 | 涂料用粘合劑.醇酸樹脂的試驗方法.非皂化物質含量的測定 | Binders for paints - Methods of test for alkyd resins - Determination of unsaponifiable matter content |
| BS 6782-16.4-2000 | 涂料用粘合劑.醇酸樹脂的試驗方法.脂肪酸含量的測定 | Binders for paints - Methods of test for alkyd resins - Determination of fatty acid content |
| BS 6910-1-1988 | 電壓范圍為交流1000V 和直流1500V 的冷澆注樹脂復合物和熱縮電纜接頭.第1部分:材料規范 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials |
| BS 6910-2-1989 | 電壓范圍為交流1000V和直流1500Vd.c.的低溫澆注樹脂復合物和熱縮電纜接頭.第2部分:現場安裝實用規程 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 7332-1990 | 基于熱固性樹脂的裝飾性連續疊層板材規范 | Specification for decorative continuous laminates (DCL) based on thermosetting resins |
| BS 7383-1990 | 煤礦用電壓不超過11KV的作為外殼內連接電纜填充劑的冷澆樹脂基化合物規范 | Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines |
| BS 7933-1-1998 | 電纜.附件.材料特性.在加工處理狀態和處理前的樹脂化合物 | Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state |
| BS 8204-6-2001 | 找平層、底基和就地鋪裝的地板材料.合成樹脂地板材料.實施規程 | Screeds, bases and in-situ floorings - Synthetic resin floorings - Code of practice |
| BS DD 88-1983 | 土木工程用的非流動性樹脂膠料的適用期評估方法 | Method for the assessment of pot life of non-flowing resin compositions for use in civil engineering |
| BS DD CEN/TS 14578-2003 | 給水或排水和下水道用塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GPR).安裝的推薦實施 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation |
| BS DD CEN/TS 14632-2006 | 排水、排污和供水、壓力和非壓力用塑料管道系統.基于聚酯樹脂(UP)玻璃纖維增強熱固性塑料(GPR).合格評定指 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Guidance for the assessment of conformity |
| BS DD ISO/TS 10465-1-2007 | 基于非飽和聚酯樹脂(GRP-UP)撓性玻璃加強管的地下裝置.安裝規程 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Installation procedures |
| BS EN 1013-2-1999 | 單層屋面用透光成型塑料薄板.玻璃纖維增強的聚酯樹脂薄板的試驗方法和特殊要求 | Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) |
| BS EN 12003-1998 | 地磚膠粘劑.反應樹脂粘接劑的剪切粘接強度的測定 | Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives |
| BS EN 12808-1-1999 | 面磚用膠粘劑和灌漿.反應樹脂灰漿耐化學性測定 | Adhesives and grouts for tiles - Determination of chemical resistance of reaction resin mortars |
| BS EN 12873-3-2006 | 材料對人類用水的影響.由遷移造成的影響.離子交換和吸附樹脂的試驗方法 | Influence of materials on water intended for human consumption - Influence due to migration - Test method for ion exchange and adsorbent resins |
| BS EN 13366-2001 | 肥料.測定微生物肥料鏊合功能用陽離子交換樹脂的處理 | Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients |
| BS EN 13411-4-2002 | 鋼絲繩索的接頭.安全性.金屬和樹脂套節連接 | Terminations for steel wire ropes - Safety - Metal and resin socketing |
| BS EN 14364-2006 | 地下壓力排水和排污水塑料管道系統.未飽和聚酯樹脂(UP)玻璃纖維增強的熱固性塑料(GRP).管道、配件和連接件 | Plastic piping systems for drainage and sewerage with or without pressure - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 1544-2006 | 混凝土結構的保護和修整用產品和設備.試驗方法.鋼筋條固定用合成樹脂產品(PC)持續拉伸荷載下蠕變的測定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars |
| BS EN 1877-1-2000 | 混凝土結構保護和維修用產品和系統.試驗方法.與環氧樹脂相關的活性功能.環氧當量的測定 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Determination of epoxy equivalent |
| BS EN 1877-2-2000 | 混凝土結構保護和維修用產品和系統.試驗方法.與環氧樹脂相關的活性功能.通過總堿值測定氨功能 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Determination of amine functions using the total basicity number |
| BS EN 2259-1995 | 硅樹脂橡膠(VMQ).硬度:50 IRHD(國際橡膠硬度標度) | Silicone rubber (VMQ) - Hardness 50 IRHD |
| BS EN 2260-1995 | 硅樹脂橡膠(VMQ).硬度:60 IRHD(國際橡膠硬度標度) | Silicone rubber (VMQ) - Hardness 60 IRHD |
| BS EN 2261-1995 | 硅樹脂橡膠(VMQ).硬度:70 IRHD(國際橡膠硬度標度) | Silicone rubber (VMQ) - Hardness 70 IRHD |
| BS EN 2331-1993 | 紡織玻璃纖維預浸漬.測定單位面積樹脂、纖維含量和纖維質量的試驗方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area |
| BS EN 2332-1993 | 紡織玻璃纖維預浸漬.測定樹脂流動的試驗方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin flow |
| BS EN 2375-1992 | 樹脂預浸漬材料.生產批次抽樣程序 | Resin preimpregnated materials - Production batch sampling procedure |
| BS EN 2559-1997 | 碳素纖維預浸織物.樹脂成份,纖維成份以及單位面積纖維質量測定 | Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area |
| BS EN 2560-1998 | 炭纖維預浸漬物.樹脂流量的測定 | Carbon fibre preimpregnates - Determination of the resin flow |
| BS EN 2564-1998 | 碳纖維層壓板材.纖維、樹脂含量和空隙率的測定 | Carbon fibre laminates - Determination of the fibre, resin and void contents |
| BS EN 438-1-2005 | 裝飾用高壓層壓板(HPL).熱固性樹脂基板材(一般稱為層壓板).說明和一般信息 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Introduction and general information |
| BS EN 438-2-2005 | 裝飾用高壓層壓板(HPL).熱固性樹脂基板材(一般稱為層壓板).性能測定 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Determination of properties |
| BS EN 438-3-2005 | 裝飾用高壓層壓制件(HPL).基于熱固性樹脂的薄板材(通常稱為層壓制件).第3部分:用于粘結支撐基質的不足2毫米 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for laminates less than 2mm thick intended for bonding to supporting substrates |
| BS EN 438-4-2005 | 裝飾用高壓層壓制件(HPL).基于熱固性樹脂的薄板材(通常稱為層壓制件).第4部分:厚度為2毫米和大于2毫米的壓 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for compact laminates of thickness 2mm and greater |
| BS EN 438-5-2005 | 裝飾用高壓層壓板材(HPL).基于熱固性樹脂的薄板材(通常稱為層壓板材).用于粘結支撐基質的厚度不足2毫米的樓 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for flooring grade laminates less than 2mm thick intended for bonding to supporting substrates |
| BS EN 438-6-2005 | 基于熱固性樹脂的裝飾用高壓層壓(HPL)薄板材.大于和等于2mm厚的外部用壓實層壓板材的分類和規范 | Decorative high-pressure laminates (HPL) sheets based on thermosetting resins - Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater - Classification and specifications for exterior-grade compact laminates of thickness 2mm and greater |
| BS EN 438-7-2005 | 裝飾用高壓層壓板材(HPL).基于熱固性樹脂的薄板材(通常稱為層壓板材).內墻、外墻和天花板終飾用壓實層壓板 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 50089-1992 | 金屬外殼充氣高壓開關裝置和控制裝置用的澆鑄樹脂分隔板規范 | Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear |
| BS EN 60191-6-2-2002 | 半導體裝置的機械標準化.表面安裝的半導體裝置封裝外形圖繪制的一般規則.1.5mm、1.27mm和1.00mm樹脂球和引 | Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages |
| BS EN 60317-0-4-1998 | 特種繞組線規范.一般要求.樹脂或清漆浸漬玻璃纖維繞制、裸或漆包矩形銅線 | Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-0-5-2007 | 繞組線的特殊類型用規范.一般要求.玻璃纖維編制樹脂或浸漬清漆的裸露或涂瓷釉的矩形銅線 | Specifications for particular types of winding wires - General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-0-6-2001 | 特種繞組線規范.一般要求.玻璃絲繞包浸樹脂或浸清漆的裸圓銅線或漆包圓銅線 | Specifications for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire |
| BS EN 60317-48-2000 | 特種繞組線規范.玻璃纖維纏繞樹脂或清漆浸漬的裸露或漆包圓銅線,溫度指數為155 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 |
| BS EN 60317-49-2000 | 特種繞組線規范.玻璃纖維纏繞樹脂或清漆浸漬的裸露或漆包圓銅線,溫度指數為180 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 |
| BS EN 60317-50-2000 | 特種繞組線規范.玻璃纖維纏繞樹脂或清漆浸漬的裸露或漆包圓銅線,溫度指數為200 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 |
| BS EN 60371-3-4-1996 | 云母基絕緣材料規范.第3部分:單項材料規范.第4節:用B級環氧樹脂粘合劑粘結的聚酯薄膜襯底云母紙 | Specification for insulating materials based on mica - Specifications for individual materials - Polyester film-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60371-3-5-2006 | 云母基絕緣材料.單項材料規范.用環氧樹脂粘合劑粘結的待浸漬(VPI)的玻璃襯底云母紙 | Insulating materials based on mica - Specifications for individual materials - Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) |
| BS EN 60371-3-6-1996 | 云母基絕緣材料規范.第3部分:單項材料規范.第6節:用B級環氧樹脂粘合劑粘結的玻璃纖維織物襯底云母紙 | Specification for insulating materials based on mica - Specifications for individual materials - Gloss-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60371-3-7-1996 | 云母基絕緣材料規范.第3部分:單項材料規范.單根導線膠帶用帶有環氧樹脂粘結劑的聚脂薄膜云母紙 | Specification for insulating materials based on mica - Specifications for individual materials - Polyester film mica paper with an epoxy resin binder for single conductor taping |
| BS EN 60454-3-11-2007 | 電工用壓敏粘帶.單項材料規范.涂有玻璃長絲、纖維素皺紋紙、聚酯非織布、環氧樹脂和壓敏粘合劑的聚酯薄膜化 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
| BS EN 60454-3-6-1998 | 電氣用壓敏膠帶規范.單個材料規范.帶丙烯酸類樹脂熱塑膠粘劑的聚碳酸酯膜帶. | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polycarbonate film tapes with acrylic thermoplastic adhesive |
| BS EN 60455-1-1998 | 電氣絕緣用樹脂基電抗復合物.定義和一般要求 | Resin based reactive compounds used for electrical insulation - Definitions and general requirements |
| BS EN 60455-2-1999 | 電氣絕緣用樹脂基電抗復合物.試驗方法 | Resin based reactive compounds used for electrical insulation - Methods of test |
| BS EN 60455-3-1-2003 | 電氣絕緣用樹脂基反應性復合物.單項材料規范.未加填料的環氧樹脂復合物.第1活頁:未加填料的環氧樹脂復合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unfilled epoxy resinous compounds - Sheet 1: Unfilled epoxy resinous compounds |
| BS EN 60455-3-2-2003 | 電氣絕緣用樹脂基反應性復合物.單項材料規范.填石英的環氧樹脂復合物.第2活頁:填石英的環氧樹脂復合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Quartz filled epoxy resinous compounds - Sheet 2: Quartz filled epoxy resinous compounds |
| BS EN 60455-3-3-2003 | 電氣絕緣用樹脂基反應性復合物.單項材料規范.未加填料的聚氨酯復合物.第3活頁:未加填料的聚氨酯復合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unfilled polyurethane compounds - Sheet 3: Unfilled polyurethane compouds |
| BS EN 60455-3-4-2003 | 電氣絕緣用樹脂基反應性復合物.單項材料規范.加填料的聚氨酯復合物.第4部分:加填料的聚氨酯復合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Filled polyurethane compounds - Sheet 4: Filled polyurethane compounds |
| BS EN 60455-3-5-2006 | 電氣絕緣用樹脂基活性化合物.單項材料規范.不飽和聚酯基填充性樹脂 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unsaturated polyester based impregnating resins |
| BS EN 60893-1-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.定義、標記和一般要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Definitions, designations and general requirements |
| BS EN 60893-2-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.試驗方法 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test |
| BS EN 60893-3-1-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.工業硬質層壓薄板類型要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for types of industrial rigid laminated sheets |
| BS EN 60893-3-2-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.環氧樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins |
| BS EN 60893-3-3-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.三聚氰胺樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins |
| BS EN 60893-3-4-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.酚醛樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins |
| BS EN 60893-3-5-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.聚酯樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins |
| BS EN 60893-3-6-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.硅酮樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins |
| BS EN 60893-3-7-2004 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.各種材料規范.對聚酰亞胺樹脂基剛性層壓薄板的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins |
| BS EN 61212-2-2006 | 絕緣材料.電器用基于熱固樹脂的工業型剛性壓層圓管和棒材.第2部分:試驗方法 | Insulating materials — Industrial rigid round laminated tubes androds based on thermosetting resins for electrical purposes —Part 2: Methods of test |
| BS EN 61212-3-2-2006 | 電工用工業剛性圓熱固樹脂層壓管和棒材.各種材料規范.第2部分:圓層壓摸制管 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes |
| BS EN 61212-3-3-2006 | 電工用工業剛性圓熱固樹脂層壓管和棒材.第3部分:各種材料規范.圓層壓壓制桿 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods |
| BS EN 62011-1-2002 | 絕緣材料.基于熱固樹脂材料的矩形和六角形截面的工業用剛性模塑的疊層管材和棒材.定義、符號和名及一般要求 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Definitions, designations and general requirements |
| BS EN 62011-2-2004 | 絕緣材料.電工用熱固性樹脂基矩形和六邊形截面的工業硬質模塑層壓管材和桿材.試驗方法 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Methods of test |
| BS EN 62011-3-1-2004 | 絕緣材料.電工用熱固性樹脂基矩形和六邊形截面的工業硬質模塑層壓管材和桿材.矩形和六邊形橫截面的管材和桿 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical puroposes - Tubes and rods of rectangular and hexagonal cross-section |
| BS EN 650-1997 | 彈性地面覆蓋物.有黃麻襯或聚酯氈襯或聚酯樹脂和聚氯乙烯襯的聚氯乙烯地面覆蓋物.規范 | Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing - Specification |
| BS EN ISO 10082-2000 | 塑料.酚醛樹脂.分類和試驗方法 | Plastics - Phenolic resins - Classification and test methods |
| BS EN ISO 10283-2007 | 涂料和清漆用粘合劑.異氰酸酯樹脂中單節顯性二異氰酸鹽的測定 | Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins |
| BS EN ISO 1060-1-1999 | 塑料.氯乙烯的均聚物和共聚物樹脂.標示體系和基礎規范 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Designation system and basis for specifications |
| BS EN ISO 1060-2-1999 | 塑料.氯乙烯的均聚物和共聚物樹脂.試樣的制備和性能的測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Preparation of test samples and determination of properties |
| BS EN ISO 10618-2004 | 碳纖維.樹脂浸漬紗拉伸性能的測定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn |
| BS EN ISO 11401-1998 | 塑料.酚醛樹脂.用液體色譜法分離 | Plastics - Phenolic resins - Separation by liquid chromatography |
| BS EN ISO 11402-2005 | 酚醛樹脂、氨基樹脂和縮合樹脂.游離甲醛含量的測定 | Phenolic, amino and condensation resins - Determination of free-formaldehyde content |
| BS EN ISO 11409-1998 | 塑料.酚醛樹脂.差示掃描量熱法測定反應熱和反應溫度 | Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry |
| BS EN ISO 11667-2000 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強的纖維和礦物填料含量的測定.溶解方法 | Fibre reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforcement-fibre and mineral-filler content - Dissolution methods |
| BS EN ISO 11668-2001 | 涂料和清漆用粘結劑.含氯聚合樹脂.通用試驗方法 | Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test |
| BS EN ISO 11908-1996 | 色漆和清漆用粘合劑.胺基樹脂.一般試驗法 | Binders for paints and varnishes - Amino resins - General methods of test |
| BS EN ISO 11909-2007 | 涂料和清漆用粘合劑.聚亞安酯樹脂.一般試驗法 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test |
| BS EN ISO 12215-1-2000 | 小艇.船體結構和船材尺寸.材料：玻璃纖維增強熱固性樹脂標準層壓板材 | Small craft - Hull construction and scantlings - Materials - Thermosetting resins, glass-fibre reinforcement, reference laminate |
| BS EN ISO 1264-1997 | 塑料.氯乙烯的均聚物和共聚物樹脂.水萃物的pH值測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract |
| BS EN ISO 1265-2007 | 塑料.聚氯乙烯樹脂.雜質和外來雜質數的測定 | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles |
| BS EN ISO 1269-2006 | 塑料.氯乙烯均聚物和共聚物樹脂.揮發性物質(包括水)的測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) |
| BS EN ISO 15252-1-2000 | 塑料.環氧樹脂模塑化合物(EP-PMCs).命名系統和基本規范 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Designation system and basis for specifications |
| BS EN ISO 15252-2-2000 | 塑料.環氧樹脂模塑化合物(EP-PMCs).試樣制備和特性測定 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Preparation of test specimens and determination of properties |
| BS EN ISO 1624-2002 | 塑料.氯乙烯均聚物和共聚物樹脂.水濾篩析 | Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water |
| BS EN ISO 1628-2-2000 | 塑料.用毛細粘度計測定稀釋溶液中聚合物的粘度值.聚氯乙烯樹脂 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vinyl chloride) resins |
| BS EN ISO 1675-1998 | 塑料.液態樹脂.比重計法測定密度 | Plastics - Liquid resins - Determination of density by the pyknometer method |
| BS EN ISO 2114-2000 | 塑料(聚酯樹脂)、涂料和清漆(粘合劑).部分酸值和總酸值的測定 | Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value |
| BS EN ISO 21627-1-2003 | 塑料.環氧樹脂.氯含量測定.無機氯 | Plastics - Epoxy resins - Determination of chlorine content - Inorganic chlorine |
| BS EN ISO 21627-2-2003 | 塑料.環氧樹脂.氯含量測定.易皂化氯 | Plastics - Epoxy resins - Determination of chlorine content - Easily saponifiable chlorine |
| BS EN ISO 21627-3-2003 | 塑料.環氧樹脂.氯含量測定.氯總量 | Plastics - Epoxy resins - Determination of chlorine content - Total chlorine |
| BS EN ISO 2535-2002 | 塑料.未飽和的聚酯樹脂.室溫時的膠凝時間的測量 | Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature |
| BS EN ISO 2554-1999 | 塑料.不飽和聚酯樹脂.羥基值的測定 | Plastics - Unsaturated polyester resins - Determination of hydroxyl value |
| BS EN ISO 2555-2000 | 塑料.液態或象乳膠或分散體一樣的樹脂.用布洛克菲文德試驗法測定視粘度 | Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method |
| BS EN ISO 308-1998 | 塑料.酚制模材料.丙酮可溶性物質測定(非制模狀態下樹脂含量) | Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) |
| BS EN ISO 3219-1994 | 塑料.液態或乳狀態或分散劑作用的聚合物/樹脂.用具有規定剪切率的旋轉式粘度計測定粘度 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate |
| BS EN ISO 3521-2000 | 塑料.不飽和聚酯和環氧樹脂.總體積收縮量的測定 | Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage |
| BS EN ISO 3672-1-2001 | 塑料.不飽和聚酯樹脂.名稱與符號系統 | Plastics - Unsaturated-polyester resins (UP-R) - Designation system |
| BS EN ISO 3672-2-2001 | 塑料.不飽和聚酯樹脂.試樣的制備和性能的測定 | Plastics - Unsaturated-polyester resins (UP-R) - Preparation of test specimens and determination of properties |
| BS EN ISO 3673-1-2000 | 塑料.環氧樹脂.名稱與符號 | Plastics - Epoxy resins - Designation |
| BS EN ISO 3673-2-2000 | 塑料.環氧樹脂.試樣的制備和特性的測量 | Plastics - Epoxy resins - Preparation of test specimens and determination of properties |
| BS EN ISO 4597-1-1998 | 塑料.環氧樹脂的硬化劑和促進劑.名稱與牌號 | Plastics - Hardeners and accelerators for epoxide resins - Designation |
| BS EN ISO 4608-1998 | 塑料.一般用途的氯乙烯均聚物和共聚物樹脂.室溫下增塑劑吸收性的測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature |
| BS EN ISO 4610-2001 | 塑料.氯乙烯均聚物和共聚物樹脂.用噴氣式的篩濾器的篩析 | Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus |
| BS EN ISO 4615-1999 | 塑料.未飽和聚酯和環氧樹脂.氯的總含量的測定 | Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content |
| BS EN ISO 4895-2000 | 塑料.液態環氧樹脂.結晶傾向的測定 | Plastics - Liquid epoxy resins - Determination of tendency to crystallize |
| BS EN ISO 584-1998 | 塑料.不飽和聚酯樹脂.80℃時的反應性測定(常規方法) | Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) |
| BS EN ISO 6401-2004 | 塑料.氯乙烯均聚物和共聚物樹脂.剩余氯乙烯單體的測定.氣相色譜法 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method |
| BS EN ISO 6744-1-2000 | 涂料和清漆用粘合劑.醇酸樹脂.一般方法 | Binders for paints and varnishes - Alkyd resins - General methods |
| BS EN ISO 6744-2-2000 | 涂料和清漆用粘合劑.醇酸樹脂.鄰苯二甲酸酐含量的測定 | Binders for paints and varnishes - Alkyd resins - Determination of phthalic anhydride content |
| BS EN ISO 6744-3-2000 | 涂料和清漆用粘合劑.醇酸樹脂.非皂化物質含量的測定 | Binders for paints and varnishes - Alkyd resins - Determination of unsaponifiable matter content |
| BS EN ISO 6744-4-2000 | 涂料和清漆用粘合劑.醇酸樹脂.脂肪酸含量的測定 | Binders for paints and varnishes - Alkyd resins - Determination of fatty acid content |
| BS EN ISO 7142-2007 | 涂料和清漆用粘合劑.環氧樹脂.一般試驗方法 | Binders for paints and varnishes - Epoxy resins - General methods of test |
| BS EN ISO 7327-1996 | 塑料.環氧樹脂用固化劑和促進劑.酸酐中游離酸測定 | Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride |
| BS EN ISO 8619-2005 | 塑料.酚醛樹脂粉.在加熱的玻璃板上流動距離的測定 | Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate |
| BS EN ISO 8974-2002 | 塑料.酚醛樹脂.用氣相色譜法測定殘余酚含量 | Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography |
| BS EN ISO 8975-1995 | 塑料.酚醛樹脂.pH值的測定 | Plastics - Phenolic resins - Determination of pH |
| BS EN ISO 8987-2006 | 塑料.酚醛樹脂.aB-轉換離子試驗板上的活性測定 | Plastics - Phenolic resins - Determination of reactivity on aB-transformat ion test plate |
| BS EN ISO 8988-2006 | 塑料.酚醛樹脂.六亞甲基四胺含量的測定.凱氏法、過氯酸法和鹽酸法 | Plastics - Phenolic resins - Determination of hexamethylene-tetramine content - Kjeldahl method, perchloric acid method and hydrochloric acid method |
| BS EN ISO 8989-1998 | 塑料.液體酚醛樹脂.水混溶性的測定 | Plastics - Liquid phenolic resins - Determination of water miscibility |
| BS EN ISO 9396-2001 | 塑料.酚醛樹脂.用自動裝置測定在給定溫度下的凝膠時間 | Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus |
| BS EN ISO 9771-1997 | 塑料.酚醛樹脂.測定可溶酚醛樹脂在酸性條件下凝固時假絕熱溫升 | Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions |
| BS EN ISO 9944-1995 | 塑料.酚醛樹脂.樹脂萃取物電導率的測定 | Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts |
| BS ISO 11376-1997 | 塑料.環氧樹脂和環氧丙基酯.無機氯的測定 | Plastics. Epoxy resins and glycidyl esters. Determination of inorganic chlorine |
| BS ISO 11667-1997 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量測定.溶解方法 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS ISO 1268-7-2001 | 纖維增強塑料.試驗板的生產方法.樹脂轉換模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Resin transfer moulding |
| BS ISO 14654-2000 | 混凝土增強用環氧樹脂涂覆鋼 | Epoxy-coated steel for the reinforcement of concrete |
| BS ISO 14656-2000 | 混凝土加筋鋼涂層用環氧樹脂粉末和密封材料 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| BS ISO 14848-1998 | 塑料制品.不飽和聚酯樹脂.130℃下反應性測定 | Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 °C |
| BS ISO 15034-1999 | 復合材料.預浸料坯.樹脂流動的測定 | Composites - Prepregs - Determination of resin flow |
| BS ISO 15840-2006 | 船舶和海上技術.海上設備用熱固性樹脂纖維玻璃管和管件的標準規范 | Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| BS ISO 21318-2007 | 塑料.環氧樹脂.水樹脂浸漬物電導性測定 | Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts |
| BS ISO 22498-2006 | 塑料.氯乙烯均聚物和共聚物樹脂.采用機械篩分法進行的粒度測定 | Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving |
| BS ISO 3597-1-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.棒的一般考慮和制備 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - General considerations and preparation of rods |
| BS ISO 3597-2-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.彎曲強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength |
| BS ISO 3597-3-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.壓縮強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength |
| BS ISO 3597-4-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.表觀層間剪切強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of apparent interlaminar shear strength |
| BS ISO 3672-1-2000 | 塑料.未飽和聚酯樹脂(UP-R).標記系統 | Plastics. Unsaturated-polyester resins (UP-R). Designation system |
| BS ISO 3672-2-2000 | 塑料.未飽和聚酯樹脂(UP-R).試樣制備和性能測定 | Plastics. Unsaturated-polyester resins (UP-R). Preparation of test specimens and determination of properties |
| BS ISO 5833-2002 | 外科植入物.丙烯酸樹脂粘接劑 | Implants for surgery - Acrylic resin cements |
| BS PL 4-2005 | 高強度纖維增強復合物的低壓層壓用不飽和聚酯樹脂的特性.規范 | Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Specification |
| BS PL 5-2005 | 高強度纖維增強復合物的低壓層壓用不飽和聚酯樹脂.試驗方法 | Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Test methods |
| BS PL 7-2005 | 玻璃纖維增強疊層制品的低壓層壓用不飽和聚酯樹脂.試驗方法 | Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates - Test methods |
| DD 88-1983 | 土木工程用不流動樹脂成分坩堝壽命評定方法 | Method for the assessment of pot life of non-flowing resin compositions for use in civil engineering |
| 編號 | 中文名稱 | 英文名稱 |