| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A05-202-1977 | 離子交換樹脂分離法.樹脂類型、芯桿的制造和使用 | (APPLICATION OF SEPARATIONS ON ION-EXCHANGE RESINES. RESIN TYPES,COLUMN MAKING AND UTILISATION.) |
| NF A21-106-1979 | 鉻礦石的化學分析.鉛的測定.離子交換樹脂分離后的原子吸收光譜法 | (CHEMICAL ANALYSIS OF CHROMIUM ORES. DETERMINATION OF LEAD . ATOMIC ABSORPTION SPECTROMETRIC METHOD AFTER SEPARATION ON ION-EXCHANGE RESIN.) |
| NF A47-251-4-2002 | 鋼絲繩接線端.安全.第4部分:金屬和樹脂套接 | (Terminations for steel wire ropes - Safety - Part 4 : metal and resin socketing.) |
| NF A49-706-1988 | 鋼管.環氧樹脂外涂層.應用.檢驗和試驗 | (STEEL TUBES. EPOXY RESIN POWDER EXTERNAL COATING. APPLICATION. INSPECTION AND TEST.) |
| NF A49-707-1992 | 鋼管.環氧樹脂粉末內表面涂敷層.涂敷.檢查和試驗 | (STEEL TUBES. EPOXY RESIN POWDER INTERNAL COATING. APPLICATION. INSPECTION AND TESTING.) |
| NF A49-708-1-2002 | 近岸和海上管線用鋼管和配件.環氧樹脂及環氧樹脂改良外涂層 | (Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings.) |
| NF A49-712-1993 | 鋼管.帶二層環氧樹脂聚丙烯涂層的外包履層.用擠壓法涂施 | (STEEL TUBES. EXTERNAL COATING WITH TWO RESIN EPOXY-POLYPROPYLENE LAYER COATING. APPLICATION BY EXTRUSION.) |
| NF A49-713-1993 | 鋼管.帶有環氧樹脂及聚酰胺基涂層的外部和/或內部雙層覆層 | (STEEL TUBES. EXTERNAL AND/OR INTERNAL TWO LAYERS COATING WITH EPOXY RESIN AND POLYAMIDE BASED COATING.) |
| NF A49-714-1997 | 鋼管.帶有酚醛樹脂或環氧樹脂及聚酰胺基涂層的內部雙層覆層 | (STEEL TUBES. INTERNAL TWO LAYERS COATING WITH PHENOL RESIN OR EPOXY RESIN AND POLYAMIDE BASED COATING.) |
| NF B51-282-1992 | 蜜胺樹脂飾面的木屑板.耐磨性的測定 | (MELAMINE FACED PARTICLEBOARDS. DETERMINATION OF RESISTANCE TO ABRASION.) |
| NF C26-011-1-2003 | 絕緣材料.電工用工業剛性模制矩形和六邊形橫截面的熱固性樹脂基層壓管材和棒材.第1部分:定義、名稱與符號和 | (Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1 : definitions, des) |
| NF C26-113-4-1995 | 云母基絕緣材料規范.第3部分:單項材料規范.第4活頁:用B級環氧樹脂粘合劑粘結的聚酯薄膜襯底云母紙 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 4 : polyester film-backed mica paper with a B-stage epoxy resin binder.) |
| NF C26-113-5-1995 | 云母基絕緣材料規范.第3部分:單項材料規范.第5活頁:用環氧樹脂粘合劑粘結的待浸漬處理的玻璃纖維織物襯底云 | (Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).) |
| NF C26-113-6-1995 | 云母基絕緣材料規范.第3部分:單項材料規范.第6活頁:用B級環氧樹脂粘合劑粘結的玻璃纖維織物襯底云母紙 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.) |
| NF C26-113-7-1996 | 云母基絕緣材料規范.第3部分:單項材料規范.第7活頁:單導體膠帶用帶環氧樹脂粘結劑的聚酯薄膜云母紙 | (Insulating materials based on mica. Part 3 : specification of individual materials. Sheet 7 : polyester film mica paper with an expoxy resin binder for single conductor taping.) |
| NF C26-148-6-1998 | 電氣用壓力敏感粘接帶.第3部分:個體材料規范.第6節:帶丙烯酸樹脂熱塑粘接的多聚碳膜 | (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : polycarbonate film tapes with acrylic thermoplastic adhesive.) |
| NF C26-161-1999 | 電絕緣用樹脂基活性化合物.第1部分:定義和一般要求(EN 60455-1) | (Resin based reactive compounds used for electrical insulation. Part 1 : definitions and general requirements.) |
| NF C26-162-1999 | 電絕緣用的樹脂類化合物.第2部分:試驗方法 | (Resin based reactive compounds used for electrical insulation. Part 2 : methods of test.) |
| NF C26-163-1-2003 | 電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第1活頁:未加填料的環氧樹脂化合物 | (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : unfilled epoxy resinous compounds.) |
| NF C26-163-11-1993 | 電氣絕緣用無溶劑可聚合樹脂化合物規范.第3部分:單項材料規范.第11活頁:環氧樹脂基粉末涂料 | (Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 11 : epoxy resin-based coating powders.) |
| NF C26-163-2-2003 | 電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第2活頁:石英填充的環氧樹脂化合物 | (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : quartz filled epoxy resinous compounds.) |
| NF C26-163-3-2003 | 電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第3活頁:未加填料的聚氨酯化合物 | (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 3 : unfilled polyurethane compounds.) |
| NF C26-163-4-2003 | 電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第4活頁:加填料的聚氨酯化合物 | (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 4 : filled polyurethane compounds.) |
| NF C26-163-5-1993 | 電氣絕緣用無溶劑可聚合樹脂化合物規范.第3部分:單項材料規范.第5活頁:不飽和聚酯填充性樹脂 | (Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 5 : unsaturated polyester impregnating resins.) |
| NF C26-167-1996 | 電氣用基于熱固性樹脂的工業硬質圓形層壓管和棒材.第2部分:試驗方法 | (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 2 : methods of test.) |
| NF C26-168-1-1995 | 電工用工業剛性圓熱固樹脂層壓管和棒材-第3部分:專用材料規范-活頁1:圓層壓軋制管 | (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for indivudual materials. Sheet 1 : round laminated rolled tubes.) |
| NF C26-168-2-1995 | 電工用工業剛性圓熱固樹脂層壓管和棒材-第3部分:專用材料規范-活頁2:圓層壓壓制管 | (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : round laminated moulded tubes.) |
| NF C26-168-3-1995 | 電工用工業剛性圓熱固樹脂層壓管和棒材-第3部分:專用材料規范-活頁3:圓層壓壓制桿 | (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : round laminated moulded rods.) |
| NF C26-181-1994 | 以熱固性樹脂為基的電工用工業剛性層壓板規范.第1部分:定義、標記和一般要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 1 : definitions, designations and general requirements.) |
| NF C26-182-1994 | 電氣用基于熱固性樹脂的工業硬質層壓板材規范.第2部分:試驗方法 | (Specification for industrial rigide laminated sheets based on thermosetting resins for electrical purposes. Part 2 : methods of test.) |
| NF C26-183-1-1994 | 電工用熱固性樹脂基工業剛性層壓板規范.第3部分:單項材料規范.第1篇:工業剛性層壓板的型號 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : types of industrial rigid laminated sheets.) |
| NF C26-183-2-1995 | 電工用熱固性樹脂基工業剛性層壓板規范.第3部分:單項材料規范.第2篇:環氧樹脂基剛性層壓板的要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminated sheets based on epoxyde resins.) |
| NF C26-183-2/A1-2000 | 電氣工業用熱固性樹脂基的剛性層壓薄板規范.第3部分:單項材料規范.第2節:環氧樹脂基的剛性層壓薄板要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminate) |
| NF C26-183-3-1995 | 電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第3活頁:密胺樹脂基剛性層壓板的要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for rigid laminated sheets based on melamine resins.) |
| NF C26-183-4-1995 | 電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第4活頁:酚醛樹脂基剛性層壓板的要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : requirements for rigid laminated sheets based on phenolic resins.) |
| NF C26-183-5-1995 | 電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第5活頁:聚酯樹脂基剛性壓板的要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : requirements for rigid laminated sheets based on polyester resins.) |
| NF C26-183-6-1995 | 電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第6活頁:硅氧烷樹脂基剛性層壓板的要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : requirements for rigid laminated sheets based on silicone resins.) |
| NF C26-183-7-1995 | 電工用熱固性樹脂基工業剛性層壓板規范.第3部分:專用材料規范規范.第7活頁:聚酰亞胺樹脂基剛性層壓板的要求 | (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for rigid laminated sheets based on polyimide resins.) |
| NF C26-191-1995 | 電工用工業剛性圓熱固樹脂層壓管和棒材 | (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 1 : general requirements.) |
| NF C31-004-2000 | 特種繞組線規范.第0部分:一般要求.第4節:玻璃纖維繞組樹脂或清漆浸漬的裸銅線或漆包扁銅線 | (Specifications for particular types of winding wires - Part 0 : general requirements - Section 4 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-004/A1-2001 | 特種繞組線規范.第0-4部分:一般要求.玻璃纖維繞組樹脂或清漆浸漬裸銅線或漆包扁銅線 | (Specifications for particular types of winding wires - Part 0-4 : general requirements Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-005-2000 | 特種繞組線規范.第0部分:一般要求.第5節:帶玻璃纖維保護層的樹脂或清漆浸漬的裸的或漆包扁銅線 | (Specifications for particular types of winding wires - Part 0 : general requirements - Section 5 : glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-006-2002 | 特種繞組線規范.第0-6部分:一般要求.玻璃絲繞包樹脂或漆浸漬裸或漆包圓銅線 | (Specifications for particular types of winding wires - Part 0-6 : general requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire.) |
| NF C31-681-2000 | 特種繞組線規范.第31部分:玻璃纖維繞制樹脂或清漆浸漬的裸的或漆包扁銅繞組線.溫度指數180 | (Specifications for particular types of winding wires - Part 31 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.) |
| NF C31-682-2000 | 特種繞組線規范.第32部分:玻璃纖維繞制樹脂或清漆浸漬的裸的或漆包扁銅繞組線.溫度指數155 | (Specifications for particular types of winding wires - Part 32 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155.) |
| NF C31-683/A1-2000 | 特種繞組線規范.第33部分:玻璃纖維環繞樹脂或清漆浸漬的裸的或漆包扁銅線.溫度指數200 | (Specifications for particular types of winding wires - Part 33 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200.) |
| NF C31-689/A1-2000 | 特種繞組線規范.第39部分:玻璃纖維編織的樹脂的或清漆浸漬的裸的或漆包扁銅線.溫度指數180 | (Specifications for particular types of winding wires - Part 39 : Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.) |
| NF C31-690/A1-2000 | 特種繞組線規范.第40部分:玻璃纖維編織的樹脂的或清漆浸漬的裸的或漆包扁銅線.溫度指數200 | (Specifications for particular types of winding wires - Part 40 : Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200.) |
| NF C31-698-2001 | 特種繞組線規范.第48部分:玻璃絲繞包樹脂或清漆浸漬裸銅線或漆包圓銅線.溫度指數155 | (Specifications for particular types of winding wires - Part 48 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire temperature index 155.) |
| NF C31-699-2001 | 特種繞阻線規范.第49部分:玻璃纖維繞阻線樹脂或包漆裸露圓銅線溫度指數180 | (Specifications for particular types of winding wires - Part 49 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire temperature index 180.) |
| NF C31-700-2001 | 特種繞組線規范.第50部分:玻璃絲繞包樹脂或清漆浸漬裸銅線或漆包圓銅線.溫度指數200 | (Specifications for particular types of windings wires - Part 50 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200.) |
| NF C64-455-1993 | 金屬封閉氣體填充的高壓開關和控制設備的鑄造樹脂分隔部分(歐洲標準EN 50089) | (Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear.) |
| NF C93-714-1975 | 電子元件.印制電路.多層印制電路板用環氧樹脂浸潤的玻璃纖維織物.一般規定 | (Components for electronic equipment. Printed circuits. Woven glass fabric impregnated with expoxid resin for printed boards.) |
| NF C93-762/A1-2001 | 印制電路用基材.第2-12部分:規范.多層電路板制作用規定易燃性的薄銅涂覆環氧樹脂層壓玻璃布板 | (Base materials for printed circuits - Part 2-12 : specifications : thin epoxyde wowen glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed) |
| NF C96-013-6-2-2002 | 半導體器件的機械標準化.第6-2部分:繪制表面安裝半導體器件封裝外形圖的一般規則.1.5mm、1.27mm和1.00mm 樹 | (Mechnical standardization of semiconductor devices - Part 6-2 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27) |
| NF D63-002-1999 | 成卷墻紙.精制墻紙,墻面用乙烯樹脂和塑料墻面飾層規范. | (Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings.) |
| NF E29-260-1987 | 工業管道.涂PTFE-FEP-PFA碳氟化樹脂的管道構件 | (Industrial pipes. Pipe components with PTFE - FEP - PFA fluorocarbon resin.) |
| NF F19-211-1990 | 鐵路車輛.機車部件鑒定用的醇酸樹脂 | (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS FOR MARKING PARTS OF ROLLING STOCK.) |
| NF F19-220-1992 | 鐵路車輛.環氧樹脂涂料.涂二層的保護和裝飾體系 | (RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. TWO-COAT PROTECTION AND DECORATION SYSTEM.) |
| NF F19-222-1992 | 鐵路車輛.醇酸樹脂涂料.單層保護體系 | (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS. MONOCOAT PROTECTION SYSTEM.) |
| NF F19-223-1992 | 鐵路車輛.環氧樹脂漆.應力條件下防腐保護裝置 | (RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. PROTECTION SYSTEM TO PREVENT THE CORROSION UNDER STRESS.) |
| NF F19-283-1990 | 鐵路車輛.二層保護系統用的醇酸樹脂漆 | (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS USED TO PROVIDE A TWO-COAT PROTECTION.) |
| NF F19-477-1991 | 鐵路車輛.聚酯樹脂熱固性粉末涂料 | (RAILWAY ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF POLYESTER RESINS.) |
| NF F19-478-1989 | 鐵路車輛.熱固性環氧樹脂漆粉 | (ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF EPOXY RESINS.) |
| NF F31-447-1989 | 鐵路車輛.表面用熱固性樹脂裝潢的膠合板 | (ROLLING STOCK. LAMINATED PANELS WITH DECORATED SURFACE,MADE OF THERMOSETTING RESINS.) |
| NF J95-046-1-2001 | 小型飛行器.殼的構造和建材尺寸.第1部分:材料.玻璃纖維增強參考層壓熱固樹脂 | (Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.) |
| NF L17-021-1998 | 航空航天系列.非金屬材料.樹脂,粘接劑,增強塑料,預浸漬.用液相色譜測定特性 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.) |
| NF L17-250-3-1996 | 航空和航天.硅樹脂橡膠(VMQ).硬度:60 IRHD | (Aerospace series. Silicone rubber (vmq). Hardness 60 irhd.) |
| NF L17-250-4-1996 | 航空和航天.硅樹脂橡膠(VMQ).硬度:70 IRHD | (Aerospace series. Silicone rubber (vmq). Hardness 70 irhd.) |
| NF L17-413-1998 | 航空航天系列.碳素纖維層壓材料.纖維.樹脂和空隙量的測定 | (AEROSPACE SERIES. CARBON FIBRE LAMINATES. DETERMINATION OF THE FIBRE, RESIN AND VOID CONTENTS. (EUROPEAN STANDARD EN 2564).) |
| NF L17-422-1997 | 航天航空系列.碳纖維增強保混劑.樹脂、纖維含量和每單位面積纖維質量的測定(歐洲標準EN 2559) | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2559).) |
| NF L17-451-1988 | 航空和航天.熱固性樹脂預浸材料.差示熱切析.試驗方法 | (Aerospace. Fabrics pre-impregnated with thermosetting resin. Differential scanning calorimetry. Test method.) |
| NF L17-452-1988 | 航空和航天.熱固性樹脂預浸織物.耐垂直拉伸強度試驗 | (Aerospace. Fabric pre-impregnated with thermosetting resin. Perpendicular tensile resistance test.) |
| NF L17-454-1998 | 航空航天系列.預浸漬碳素纖維.樹脂流測定 | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2560).) |
| NF L17-455-1988 | 航空和航天.熱固性樹脂預浸合成材料.耐剝離強度試驗 | (Aerospace. Thermosetting resins, prepreg based composite materials. Peel strength.) |
| NF L17-702-1992 | 航空航天系列.樹脂預浸漬材料.生產批抽樣程序 | (AEROSPACE SERIES. RESIN PREIMPREGNATED MATERIALS. PRODUCTION BATCH SAMPLING PROCEDURE. (EUROPEAN STANDARD EN 2375).) |
| NF L17-723-1993 | 航空航天系列.紡織玻璃纖維預浸漬.測定樹脂和橡膠含量及單位面積纖維質量的試驗方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN AND FIBRE CONTENT AND MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2331).) |
| NF L17-724-1993 | 航空航天系列.紡織玻璃纖維預浸漬.測定樹脂流的試驗方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2332).) |
| NF L19-031-1993 | 航空航天系列.管狀單元,六角形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-032-1993 | 航空航天系列.管狀單元,矩形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-033-1993 | 航空航天系列.管狀單元,撓性,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-034-1992 | 航空航天系列.蜂窩狀材料.六方管腔.聚酰胺芳族紙,酚醛樹脂浸漬的.標準產品 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-035-1993 | 航空航天系列.管狀單元、矩形、聚酰胺芳族紙和酚醛樹脂浸漬的蜂窩型材料.產品標準 | (AREOSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-036-1993 | 航空航天系列.管狀單元、撓性、聚酰胺芳族紙和酚醛樹脂浸漬的蜂窩型材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-037-1993 | 航空航天系列.管狀單元,六角形,碳纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL CARBON FABRIC, PHENOLIC RESIN IMPREGNATED ORIENTED AT PLUS OVER MINUS. PRODUCT STANDARD.) |
| NF L19-040-1993 | 航空航天系列.管狀單元,六角形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-041-1993 | 航空航天系列.管狀單元,矩形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-043-1993 | 航空航天系列.管狀單元,六角形,牛皮紙,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, KRAFT PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-046-1993 | 航空航天系列.管狀單元,六角形,玻璃纖維,聚酰亞胺樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, POLYMIMIDE RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF M07-013-1982 | 液體燃料油.航空燃料的氧化穩定性.電位樹脂法 | (Liquid fuels and lubricating oils. Oxidation stability of aviation fuels. Potential residue method.) |
| NF M81-450-1989 | 煤礦器材.樹脂地腳螺栓.規格和試驗方法 | (MINING EQUIPMENT. RESIN ANCHOR BOLTS. SPECIFICATIONS AND TEST METHODS.) |
| NF P16-361-3-1997 | 無壓地下排水系統用塑料管道系統.不飽和聚酯樹脂(UP)基礎上的玻璃增強熱固塑料(GRP).第3部分:配件 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.) |
| NF P16-361-5-1997 | 無壓地下排水系統用塑料管道系統.不飽和聚酯樹脂(UP)基礎上的玻璃增強熱固塑料(GRP).第5部分:接頭的適用性 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.) |
| NF P16-361-6-1997 | 無壓地下排水系統用塑料管道系統.不飽和聚酯樹脂(UP)基礎上的玻璃增強熱固塑料(GRP).第6部分:安裝實施規程 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.) |
| NF P18-806-1989 | 水硬性混凝土建筑用的特殊產品.粘結料產品或合成樹脂基產品.灰末粒度尺寸的分析 | (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. BINDER- OR SINTHETIC RESIN BASED PRODUCTS. PARTICLE SIZE ANALYSIS OF POWDERS.) |
| NF P18-807-1989 | 水硬性混凝土建筑用的特殊產品.合成樹脂或水凝基制品.+450℃時燒失和+950℃灰份含量 | (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN OR HYDRAULIC BINDER BASED PRODUCTS. FIRE LOSS AT + 450 DEGREES CELSIUS AND ASH CONTENT AT + 950 DEGREES CELSIUS.) |
| NF P18-810-1989 | 水硬性混凝土建筑用的特殊產品.合成樹脂基產品.使用期限的確定 | (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN BASED PRODUCTS. DETERMINATION OF USUAL PRACTICE TIME.) |
| NF P18-927-1-2000 | 混凝土結構的保護和修復用產品和系統.試驗方法.與環氧樹脂有關的重活化功能.第1部分:環氧樹脂等同物的測定 | (Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1 : determination of epoxy equivalent.) |
| NF P18-927-2-2000 | 混凝土結構的保護和修復用產品和系統.試驗方法.與環氧樹脂有關的重活化功能.第2部分:用總基數對胺功能的測 | (Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2 : determination of amine functions using the total basici) |
| NF P61-609-1997 | 瓷磚和板塊用灰漿和膠粘劑.反應性樹脂膠粘劑的抗剪強度的測定 | (Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives.) |
| NF P61-611-1-1999 | 瓷磚用膠粘劑和灰漿.第1部分:反應性樹脂灰漿的耐化學腐蝕性的測定 | (Adhesives and grouts for tiles. Part 1: determination of chemical resistance of reaction resin mortars.) |
| NF P62-301-1996 | 彈性覆面層.黃麻或聚酯襯乙烯樹脂和乙烯樹脂襯聚酯基乙烯樹脂的規范 | (Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing. Specification.) |
| NF P98-623-1991 | 路面橫標記.路面上使用的標記.聚乙烯樹脂軟化的分析 | (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF SLIGHTLY OR NON POLAR PLASTICIZERS OF POLYDIENIC RESINS.) |
| NF P98-625-1991 | 路面橫標記.道路上使用的標記.用氣相色譜法對醇酸樹脂的分析 | (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF ALKYD RESINS BY GAS PHASE CHROMATOGRAPHY.) |
| NF S91-209-2000 | 牙科.假牙用樹脂 | (Dentistry - Denture base polymers.) |
| NF S91-215-2000 | 牙科.樹脂填充的、可修復的嵌入材料 | (Dentistry - Polymer-based filling, restorative and luting materials.) |
| NF T30-400-2002 | 涂料和清漆用粘結劑.含氯聚合樹脂.通用試驗方法 | (Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test.) |
| NF T30-405-1998 | 涂料和清漆用粘合劑.氨基樹脂.試驗的一般方法 | (Binders for paints and varnishes. Amino resins. General methods of test.) |
| NF T30-406-1998 | 涂料和清漆用粘合劑.聚異氰酸鹽樹脂.試驗的一般方法 | (Binders for paints and varnishes. Polyisocyanate resins. General methods of test.) |
| NF T51-013-1969 | 塑料液狀聚氯乙烯樹脂粘性指數的常規測定 | (PLASTICS. CONVENTIONAL DETERMINATION OF VISCOSITY NUMBER OF PVC RESINS IN SOLUTION.) |
| NF T51-023-1999 | 塑料.密胺甲醛樹脂模制件.可提取甲醛含量的測定 | (Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.) |
| NF T51-030-1986 | 塑料.在沸水中由6型聚酰胺樹脂中提取物質的百分比測定 | (Plastics. Determination of the percentage of extractable materials by boilling water in polyamide 6 (refractometric method).) |
| NF T51-032-1976 | 塑料.濃縮溶液中聚酰胺樹脂的粘度比測定 | (PLASTICS. DETERMINATION OF VISCOSITY RATIO OF POLYAMIDE RESINS IN CONCENTRATED SOLUTION.) |
| NF T51-042-1967 | 塑料.聚氯乙烯樹脂.壓制產品松散密度的測定 | (PLASTICS. PVC RESINS. DETERMINATION OF COMPACTED APPARENT BULK DENSITY.) |
| NF T51-043-2003 | 塑料.氯乙烯均聚物和共聚物樹脂.水中篩析 | (Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water.) |
| NF T51-044-1970 | 塑料.聚氯乙烯樹脂.硫酸灰分的測定 | (PLASTICS. PVC RESINS. DETERMINATION OF SULPHATED ASH.) |
| NF T51-049-1969 | 塑料.聚酰胺樹脂.熔點的測定.毛細管法 | (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. SO-CALLED CAPILLARY TUBE METHOD.) |
| NF T51-050-1969 | 塑料.聚酰胺樹脂.“熔點”的測定.凹凸鏡法 | (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. MENISCUS METHOD.) |
| NF T51-083-1999 | 塑料.液態或象乳膠或分散體一樣的樹脂.用布洛克菲文德試驗方法測定表面粘度 | (Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield test method.) |
| NF T51-175-1998 | 塑料.未飽和的聚酯樹脂.80℃時的反應性測定(常規方法) | (Plastics. Unsaturated polyester resins. Determination of reactivity at 80 degrees celsius (conventional method) . (EUROPEAN standard en iso 584).) |
| NF T51-177-1998 | 塑料.環氧樹脂的硬化劑和促進劑.第1部分:標識 | (Plastics. Hardeners and accelerators for epoxide resins. Part 1 : designation.) |
| NF T51-201-1998 | 塑料.液態樹脂.比重計法測定比重 | (Plastics. Liquid resins. Determination of density by the pyknometer method.) |
| NF T51-211-1994 | 塑料.乳濁態或分散態聚合物/樹脂.用確定的切變速率梯度旋轉粘度計測量粘度 | (Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate.) |
| NF T51-301-1998 | 塑料.酚醛鑄模材料.丙酮溶物質的測定(非鑄模狀態內材料中的大致樹脂含量) | (Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state).) |
| NF T51-403-1998 | 塑料.酚醛樹脂.差示掃描量熱法測定反應熱和溫度 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY. (EUROPEAN STANDARD EN ISO 11409).) |
| NF T51-404-1998 | 塑料.酚醛樹脂.通過液相色譜法的分離 | (PLASTICS. PHENOLIC RESINS. SEPARATION BY LIQUID CHROMATOGRAPHY. (EUROPEAN STANDARD EN ISO 11401).) |
| NF T51-405-1998 | 塑料.縮合樹脂.游離甲醛的測定 | (PLASTICS. CONDENSATION RESINS. DETERMINATION OF FREE FORMALDEHYDE. (EUROPEAN STANDARD EN ISO 11402).) |
| NF T51-421-1998 | 塑料.酚醛樹脂粉.在加熱玻璃板上流動距離的測定 | (Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate.) |
| NF T51-422-1995 | 塑料.酚醛樹脂粉.用空氣噴射的篩濾器械的篩分析 | (Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus.) |
| NF T51-423-1998 | 塑料.液體酚醛樹脂.水溶混性的測定 | (Plastics. Liquid phenolic resins. Determination of water miscibility.) |
| NF T51-425-1983 | 塑料.固態和液態酚樹脂.密度的測定 | (PLASTICS. LIQUID AND SOLID PHENOLIC RESINS. MEASUREMENT OF DENSITY.) |
| NF T51-426-1995 | 塑料.液態酚醛樹脂或酚醛樹脂溶液粘度的測定 | (Plastics. Phenolic resins in the liquid state of in solution. Determination of viscosity.) |
| NF T51-428-1998 | 塑料.酚醛樹脂.B-變化測試板上反應性能的測定 | (Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate.) |
| NF T51-429-2001 | 塑料.酚醛樹脂.用自動設備測定特殊條件下的膠凝時間 | (Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus.) |
| NF T51-430-1983 | 塑料.酚樹脂.水含量測定.卡爾·費休法 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF WATER CONTENT. KARL FISCHER METHOD.) |
| NF T51-431-1997 | 塑料.酚醛樹脂.六亞甲基四胺含量的測定.基氏定氮法和高氯酸法(歐洲標準EN ISO 8988) | (Plastics. Phenolic resins. Determination of hexamethylenetetramine content. Kjeldahl method and perchloric acid method.) |
| NF T51-432-1984 | 塑料.酚樹脂.過氯酸法測定HMTA含量 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HMTA CONTENT BY PERCHLORIC ACID METHOD.) |
| NF T51-434-1997 | 塑料.酚醛樹脂.游離甲醛含量的測定鹽酸胲法(歐洲標準EN ISO 9397) | (Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method.) |
| NF T51-435-1985 | 塑料.固態酚樹脂.毛細管法測定熔化范圍 | (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF MELTING RANGE BY THE CAPILLARY TUBE METHOD.) |
| NF T51-436-2002 | 塑料.酚醛樹脂.用氣體色譜法測定殘余酚的含量 | (Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.) |
| NF T51-437-1985 | 塑料.固態酚樹脂.軟化點的測定.珠環法 | (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF SOFTENING POINT. “BALL AND RING“ METHOD.) |
| NF T51-438-1998 | 塑料.液態酚醛樹脂.非揮發性物質的常規測定 | (Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter.) |
| NF T51-440-2000 | 塑料.酚醛樹脂.分類和試驗方法 | (Plastics - Phenolic resins - Classification and test methods.) |
| NF T51-441-1997 | 塑料.酚醛樹脂.測定可溶酚醛樹脂在酸性條件下的反應性(歐洲標準EN ISO 9771) | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS. (EUROPEAN STANDARD EN ISO 9771).) |
| NF T51-442-1995 | 塑料.酚醛樹脂.樹脂萃取物電導率的測定 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF ELECTRICAL CONDUCTIVITY OF RESIN EXTRACTS. (EUROPEAN STANDARD EN ISO 9944).) |
| NF T51-501-1999 | 塑料.不飽和聚酯樹脂和環氧樹脂.體積總收縮率的測定 | (Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.) |
| NF T51-510-1-2002 | 塑料.不飽和聚酯樹脂(UP-R).第1部分:名稱與符號系統 | (Plastics - Unsaturated-polyester resins (UP-R) - Part 1 : designation system.) |
| NF T51-510-2-2002 | 塑料.不飽和聚酯樹脂(UP-R).第2部分:試樣的制備和性能的測定 | (Plastics - Unsaturated-polyester resins (UP-R) - Part 2 : preparation of test specimens and determination of properties.) |
| NF T51-511-2000 | 塑料(聚脂樹脂)、涂料和清漆(粘合劑).部分酸值和全部酸值的測定 | (Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value.) |
| NF T51-512-2003 | 塑料.不飽和聚酯樹脂.室溫條件下膠凝時間的測量 | (Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.) |
| NF T51-513-1998 | 塑料.不飽和聚酯樹脂.羥基值的測定 | (Plastics. Unsaturated polyester resins. Determination of hydroxyl value.) |
| NF T51-515-1979 | 塑料.不飽和非聚合聚酯樹脂.揮發物測定 | (PLASTICS. UNSATURATED UNPOLYMERIZED POLYESTERS RESINS. DETERMINATION OF VOLATILE MATTER.) |
| NF T51-519-1999 | 塑料.不飽和聚酯和環氧樹脂.氯總含量的測定 | (PLASTICS. UNSATURATED POLYESTERS AND EPOXIDE RESINS. DETERMINATION OF TOTAL CHLORINE CONTENT. (EUROPEAN STANDARD EN ISO 4615).) |
| NF T51-520-1978 | 塑料.環氧樹脂.名稱 | (EPOXY RESINS. DESIGNATION.) |
| NF T51-523-1976 | 塑料.環氧樹脂和縮水甘油酸酯.無機氯的測定.直接滴定法 | (PLASTICS. EPOXY RESINS AND GLYCIDIC ESTERS. DETERMINATION OF INORGANIC CHLORINE. DIRECT TITRATION METHOD.) |
| NF T51-524-1998 | 塑料.環氧樹脂和相關材料.易皂化氯的測定 | (Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine.) |
| NF T51-525-1979 | 塑料.液態或固態未聚合環氧樹脂.揮發物質常規含量的測定 | (PLASTICS. SOLID OR LIQUID UNPOLYMERIZED EPOXY RESINS. DETERMINATION OF VOLATILE MATTER.) |
| NF T51-527-1985 | 塑料.環氧樹脂.性能的測定 | (PLASTICS. EPOXIES. DETERMINATION OF PROPERTIES.) |
| NF T51-530-1997 | 塑料.環氧樹脂用硬化劑和促凝劑.酸酐中自由酸的測定(歐洲標準EN ISO 7327) | (PLASTICS. HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS. DETERMINATION OF FREE ACID IN ACID ANHYDRIDE. (EUROPEAN STANDARD EN ISO 7327).) |
| NF T51-701-2002 | 塑料.氯乙烯均聚物和共聚物樹脂.使用噴氣式篩濾器械的篩析 | (Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus.) |
| NF T51-706-1986 | 塑料.氯乙烯均聚物和共聚物樹脂.殘余氯乙烯單體測定.氣相色譜法 | (PLASTICS. HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORID. DETERMINATION OF RESIDUAL VINYL CHLORID MONOMER. GAS CHROMATOGRAPHIC METHOD.) |
| NF T51-750-1981 | 塑料.氯乙烯均聚物和共聚物樹脂.揮發物質（色拾水）的測定 | (Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water).) |
| NF T51-770-1979 | 塑料.漿狀聚氯乙烯樹脂.漿的制備 | (PLASTICS. PVC RESINS FOR PASTES. PREPARATION OF A PASTE.) |
| NF T51-782-1998 | 塑料.一般應用的聚氯乙烯的均聚物和共聚物樹脂.室溫下增塑劑吸收的測定 | (Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature.) |
| NF T51-783-1978 | 塑料.一般用聚氯乙烯樹脂.加溫時增塑劑凝固的測定 | (PVC RESINS FOR GENERAL APPLICATIONS ; DETERMINATION OF ABSORPTION OF PLASTICIZER IN THE HOT STATE.) |
| NF T51-914-2002 | 塑料.環氧樹脂和環氧丙基酯.無機氯的測定 | (Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine.) |
| NF T54-301-1-1991 | 飾面用高壓層壓板(HPL).熱固性樹脂板.第1部分:規格(歐洲標準 EN 438-1) | (DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 1 : SPECIFICATIONS. (EUROPEAN STANDARD EN 438-1).) |
| NF T54-301-2-1991 | 飾面用高壓層壓板(HPL).熱固性樹脂板.第2部分:特性測定.(歐洲標準 EN 438-2) | (DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 2 : DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN 438-2).) |
| NF T54-701-1988 | 塑料.熱固樹脂基層壓板.規范 | (PLASTICS. INDUSTRIAL LAMINATED SHEETS BASED ON THERMOSETTING RESINS. SPECIFICATION.) |
| NF T57-110-1994 | 不飽和聚合樹脂基增強塑料.殘留的苯乙烯單體含量的測定 | (Reinforced plastics based on unsaturated polyester resins. Determination of residual styrene monomer content.) |
| NF T57-151-1978 | 玻璃織物增強塑料.熱固性樹脂拉力試件單向增強塑料板的制備 | (GLASS TEXTILE REINFORCED PLASTICS. PREPARATION OF SHEETS OF THERMOSETTING RESINS WITH UNIDIRECTIONAL REINFORCEMENT FOR TENSILE TEST SPECIMENS.) |
| NF T57-153-7-2002 | 纖維增強塑料.試驗板的生產方法.第7部分:樹脂壓鑄法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 7 : resin transfer moulding.) |
| NF T57-160-1-1994 | 玻璃織物增強塑料.浮法增強樹脂棒機械性能的測定.第1部分:樹脂棒的準備 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 1 : GENERAL CONSIDERATIONS AND PREPARATION OF RODS.) |
| NF T57-160-2-1994 | 玻璃織物增強塑料.浮法增強樹脂棒機械性能的測定.第2部分:樹脂棒柔性強度的測定 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 2 : DETERMINATION OF FLEXURAL STRENGTH.) |
| NF T57-160-3-1994 | 玻璃織物增強塑料.浮法增強樹脂棒機械性能的測定.第3部分:樹脂棒耐壓強度的測定 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 3 : DETERMINATION OF COMPRESSIVE STRENGTH.) |
| NF T57-160-4-1994 | 玻璃織物增強塑料.浮法增強樹脂棒機械性能的測定.第4部分:樹脂棒外觀線性分層剪切強度的測定 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 4 : DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH.) |
| NF T57-214-1-1998 | 地下排水系統和壓力下污水排放的塑料管道系統.基于不飽和聚酯 樹脂(UP)的玻璃增強熱固塑料.第1部分:一般性( | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.) |
| NF T57-214-3-1996 | 壓力下地下排水系統用塑料管道系統.不飽和聚酯樹脂基玻璃增強熱固塑料.第3部分:配件 | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.) |
| NF T57-214-5-1996 | 壓力下地下排水系統用塑料管道系統.不飽和聚酯樹脂基玻璃增強熱固塑料.第5部分:接頭的適用性 | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.) |
| NF T57-513-1973 | 玻璃織物增強塑料.聚酯樹脂預浸墊.塑性的測定 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. PLASTICITY.) |
| NF T57-514-1973 | 玻璃織物增強塑料.聚酯樹脂預浸墊.可模制性 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. MOULDABILITY.) |
| NF T57-515-1973 | 玻璃織物增強塑料.聚酯樹脂預浸墊.膨脹性測定 | (PRE-IMPREGNATED PRODUCTS BASED ON MATS MADE OF GLASS AND POLYESTER RESINS. MEASUREMENT OF EXPANSION.) |
| NF T57-555-1973 | 玻璃織物增強塑料.環氧樹脂預浸織物.拉力和剪力方法測定對銅的附著力 | (PRE-IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS : DETERMINATION OF ADHESION ON COPPER BY A METHOD INVOLVING SHEARING UNDER TRACTION.) |
| NF T57-559-1975 | 玻璃織物增強塑料.環氧樹脂預浸玻璃織物.粘合時間 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS - PRE IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS - BINDING TIME.) |
| NF T57-608-1999 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量的測定.溶解方法 | (Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforced-fibre and mineral-filler content. Dissolution methods.) |
| NF T57-616-2001 | 復合材料.預浸料坯.樹脂流測定 | (Composites - Prepregs - Determination of resin flow.) |
| NF T60-176-1994 | 暫時防蝕產品.斑痕試驗.短期樹脂化成疊板材 | (TEMPORARY PROTECTION AGAINST CORROSION. STAIN TEST. SHORT-TERM RESINIFICATIONON STACKED PANELS.) |
| NF T76-151-1992 | 承重木結構用苯酚樹脂系列和氦基塑料系列粘合劑:分類及性能要求 | (ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD BEARING TIMBER STRUCTURES : CLASSIFICATION AND PERFORMANCE REQUIREMENTS. (EUROPEAN STANDARD EN 301).) |
| NF T77-101-1985 | 工業硅樹脂.密度的測定 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF DENSITY.) |
| NF T77-103-1986 | 工業硅樹脂.一定溫度下凝膠時間的測定.薄板法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. PLATE METHOD.) |
| NF T77-105-1985 | 工業硅樹脂.水含量的測定.卡爾．費休法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF WATER CONTENT. KARL FISCHER METHOD.) |
| NF T77-106-1987 | 工業硅樹脂.粘度、擠壓度（流動率）和ＣＡＳＳＯＮ粘度的測定.標準擠壓噴嘴法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF EXTRUDABILITY (FLUIDITY) AND OF VISCOSITY “CASSON“. METHOD USING STANDARD EXTRUSION NOZZLE.) |
| NF T77-107-1986 | 工業硅樹脂.一定溫度下凝膠時間的測定.往復運動自動儀法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. METHOD USING AUTOMATIC EQUIPMENT WITH ALTERNATE MOTION.) |
| NF T77-108-1986 | 工業硅樹脂.乳劑.貯存和離心穩定性的測定 | (BASIC SILICONES FOR INDUSTRIAL USE. EMULSIONS. DETERMINATION OF STABILITY DURING STORING AND TO CENTRIFUGATION.) |
| NF T77-109-1986 | 工業硅樹脂.一定溫度下凝膠時間的測定.自動轉動儀法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. METHOD USING AUTOMATIC EQUIPMENT WITH ROTARY MOTION.) |
| NF T77-110-1986 | 工業硅樹脂.乳劑.稀釋后穩定性的測定 | (BASIC SILICONES FOR INDUSTRIAL USE. EMULSIONS. DETERMINATION OF STABILITY AFTER DILUTION.) |
| NF T77-111-1988 | 工業硅樹脂.閃點的測定 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF FLASH POINTS.) |
| NF T77-112-1988 | 工業硅樹脂.泡沫抑制使用的測定.拍打法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF ANTI-FOAMING POWER. BEATING METHOD.) |
| NF T77-150-1986 | 工業硅樹脂.羥基含量測定.氫化鋁鋰還原法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF HYDROXYL GROUPS. METHODS BY REDUCTION WITH LITHIUM-ALUMINIUM HYDRIDE.) |
| NF T77-151-1986 | 工業硅樹脂.烷氧基含量的測定.氣相色譜法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF ALCOXY RADICALS. GAS CHROMATOGRAPHIC METHOD.) |
| NF T77-152-1987 | 工業硅樹脂.硅含量的測定（硅含量小與百分之一（m ／m ）.原子吸收分光光度法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF SILICON CONTENT (SILICON CONTENT LESS THAN 1 PER CENT (M/M)). METHOD BY ATOMIC ABSORPTION SPECTROMETRY.) |
| NF T77-153-1987 | 工業硅樹脂.硅含量的測定（硅含量大于百分之一（m/m）.重量法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINAION OF SILICON CONTENT (SILICON CONTENT MORE THAN 1 PER CENT (M/M)). GRAVIMETRIC METHOD.) |
| NF T77-154-1987 | 工業硅樹脂.硅烷三醇基的含量測定（硅烷三醇含量小于百分之０．５（m／m）.氣量計法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF SILINETRIYL RADICALS (SILANETRIYL CONTENT MORE THAN 0,5 PER CENT (M/M)). GASVOLUMETRIC METHOD.) |
| NF T77-155-1987 | 工業硅樹脂.乙烯基的含量的測定（含量大于百分之０．１（m/m）.近紅外線分光光度法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF VINYL GROUPS (CONTENT MORE THAN 0,1 PER CENT (M/M)). NEAR INFRA-RED SPECTROMETRIC METHOD.) |
| NF T77-156-1987 | 工業硅樹脂.過氧化物含量的測定.紅外線分光光度法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF INTRODUCED PEROXYDES CONTENT. INFRA-RED SPECTROMETRIC METHOD.) |
| NF T77-157-1987 | 工業硅樹脂.氨基含量的測定電位滴定法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF AMINO GROUPE. POTENTIOMETRIC METHOD.) |
| NF T77-161-1988 | 工業硅樹脂.聚二甲基硅氧烷.硅烷三醇基的含量(硅烷三醇含量于0.01%cm/m).氣相色譜法 | (SILICONES. POLYDIMETHYLSILOXANES. DETERMINATION OF SILANETRIYL RADICALS (SILANETRIYL CONTENT LESS THEN 0,01 PER CENT (M/M)). GASCHROMATOGRAPHIC METHOD.) |
| NF T77-162-1988 | 工業硅樹脂.苯基/硅和苯基/甲基的關系的測定.近紅外線分光光度法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF RATIOS PHENYL/SILICIUM AND PHENYL/METHYL. NEAR INFRARED SPECTROMETRIC METHOD.) |
| NF U42-607-2001 | 肥料.螯合的微量養料含量和微量養料的螯合系數測定用陽離子交換樹脂處理 | (Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients.) |
| NF V32-070-1-1995 | 辣椒及其含油樹脂.用液壓色譜分析法測定總辣椒素 | (Chillies and chilli oleoresins. Determination of total capsaicinoid content. Part 1 : spectrometric method.) |
| NF V32-079-1990 | 香料和佐料.整個胡椒或胡椒粉和含油樹脂.用高性能液相色譜法測定胡椒的含量 | (SPICES AND CONDIMENTS. WHOLE OR GROUND PEPPER AND PEPPER OLEORESIN. DETERMINATION OF PIPERINE CONTENT BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY.) |
| 編號 | 中文名稱 | 英文名稱 |