| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 10235-1999 | 胡椒和胡椒油樹脂.胡椒堿含量的測定.高效液相色譜法 | Pepper an pepper oleoresins - Determination of piperine content - Method using high-performance liquid chromatography (HPLC) |
| DIN 16867-1982 | 化工管路用玻璃纖維增強式聚酯樹脂管道、配件和接頭.交貨技術條件 | Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions |
| DIN 16868-1-1994 | 玻璃纖維增強式不飽和聚酯樹脂(UP-GF)管材.第1部分:纏繞式和填充式.尺寸 | Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Wound, filled; dimensions |
| DIN 16868-2-1994 | 玻璃纖維增強式不飽和聚酯樹脂(UP-GF)管材.第2部分:纏繞式和填充式.一般質量要求、檢驗 | Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled; General quality requirements, testing |
| DIN 16869-1-1995 | 離心澆注玻璃纖維增強聚脂樹脂管(VP-GF).第1部分:尺寸 | Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions |
| DIN 16869-2-1995 | 離心澆注玻璃纖維增強聚脂樹脂管(VP-GF).第2部分:一般質量要求、檢驗 | Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing |
| DIN 16870-1-1987 | 紡織玻璃纖維增強環氧樹脂管.尺寸 | Wound glass fibre reinforced epoxy resin pipes; dimensions |
| DIN 16871-1982 | 離心鑄塑玻璃纖維增強環氧樹脂管.尺寸 | Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions |
| DIN 16872-1993 | 熱塑性塑料管道用管接頭組件.玻璃纖維增強的聚酯樹脂(UP-GE)法蘭.尺寸 | Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions |
| DIN 16944-1988 | 玻璃纖維增強的反應型樹脂模塑材料.試驗方法 | Glass fibre reinforced reaction resin moulding materials; test methods |
| DIN 16945-1989 | 樹脂、硬化劑、加速劑和催化樹脂的試驗. | Testing of resins, hardeners and accelerators, and catalyzed resins |
| DIN 16946-1-1989 | 凝固注塑樹脂.第1部分:檢驗方法 | Cured casting resins; testing |
| DIN 16946-2-1989 | 凝固注塑樹脂.第2部分:類型 | Cured casting resins; types |
| DIN 16964-1988 | 繞制玻璃纖維增強聚酯樹脂管.一般質量要求和試驗 | Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing |
| DIN 16965-1-1982 | 繞制玻璃纖維增強聚酯樹脂管(UP-GF).A型管.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A pipes, dimensions |
| DIN 16966-1-1988 | 玻璃纖維增強聚酯樹脂(UP-GF)異型件和連接件.第1部分:一般質量要求和檢驗 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing |
| DIN 16966-2-1982 | 玻璃纖維增強式聚酯樹脂管道配件和接頭.彎管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions |
| DIN 16966-4-1982 | 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.三通噴管嘴尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions |
| DIN 16966-5-1982 | 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.縮徑管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions |
| DIN 16966-7-1995 | 玻璃纖維增強聚酯樹脂管道連接件及其組件.第7部分:套筒、法蘭、法蘭連接和對接件.一般質量要求和試驗方法 | Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods |
| DIN 16967-2-1982 | 玻璃纖維增強環氧樹脂(EP-GF)管件和接頭.彎管、三通管、尺寸 | Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions |
| DIN 16978-1975 | 聚縮醛樹脂圓截面空心棒.尺寸 | Polyacetale hollow rods of circular cross-section; dimensions |
| DIN 18157-3-1986 | 第3部分:采用環氧樹脂粘合劑的稀灰漿工藝陶瓷襯砌的應用 | Application of ceramic tiling by the thin bed method using epoxy resin adhesives |
| DIN 18159-2-1978 | 建筑中現場發泡用泡沫塑料.絕熱用脲-甲醛樹脂現場發泡的泡沫塑料.應用、性能、制作、檢驗 | Cellular Plastics as in-situ Foam in Building; In-situ Foam Produced from Urea-formaldehyde (UF) Resin for Thermal Insulation; Application, Properties, Execution, Testing |
| DIN 18556-1985 | 合成樹脂灰漿涂層材料和合成樹脂灰漿的檢驗 | Testing of coating material for synthetic resin plasters and of synthetic resin plasters |
| DIN 18558-1985 | 合成樹脂灰漿.術語、要求、用途 | Synthetic resin plasters; terminology, requirements, application |
| DIN 18820-1-1991 | 承載構件用玻璃纖維增強非飽和聚酯樹脂和苯甲酰甲基樹脂制層壓塑料(GF-UP、GF-PHA).第1部分:結構、制造和特 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); structure, manufacture and characteristics |
| DIN 18820-2-1991 | 承載構件用玻璃纖維增強式非飽和聚酯和苯酚樹脂制層壓塑料(GF-UP.GF-PHA).第2部分:標準層壓塑料的物理參數 | Laminates of textile glass-reinforced unsaturared polyester and phenolic resins for load-bearing structural members (GF-UP, GF-PHA); physical parameters for standard laminates |
| DIN 18820-3-1991 | 承載構件用玻璃纖維增強非飽和聚酯樹脂和苯甲酰甲基樹脂制層壓塑料(GF-UP、GF-PHA).第3部分:承載層壓塑料的 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); protective measures for load-bearing laminates |
| DIN 18820-4-1991 | 承載構件用玻璃纖維增強非飽和聚脂樹酯和苯甲酰甲基樹脂制層壓塑料(GF-UP、GF-PHA).第4部分:試驗和質量控制 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); tests and quality control |
| DIN 19633-1986 | 水處理用離子交換樹脂.交貨技術條件 | Ion exchange resins for water treatment; technical delivery conditions |
| DIN 29502-1-1986 | 航空航天.織物增強的丙烯酸類樹脂的飛機窗玻璃的邊緣加強材料.設計指令 | Aerospace; edge reinforcements for aircraft glazings of fabric reinforced acrylic resins; directives for design |
| DIN 29970-1998 | 航空航天.酚醛樹脂涂層的聚酰胺紙制蜂窩芯.技術規范 | Aerospace - Honeycomb cores of polyamide paper, phenolic resin coated - Technical specification |
| DIN 29971-1991 | 航空航天.不定向碳纖維環氧樹脂薄板和預浸漬帶.技術規范 | Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification |
| DIN 46264-1988 | 澆注樹脂絕緣子的高壓引線端子 | High-voltage feed-through terminals with cast resin insulator |
| DIN 46449-1970 | 電工絕緣漆和絕緣樹脂材料.涂飾漆.試驗方法 | Insulating Varnishes and Insulating Resin Materials for Electrical Purposes; Finishing Varnishes, Test Methods |
| DIN 51290-1-1991 | 機器工程用聚合物混凝土(反應性樹脂混凝土)的檢驗.第1部分:術語 | Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; terminology |
| DIN 51290-2-1991 | 機器工程用反應性樹脂混凝土的檢驗.第2部分:粘合劑、填充劑和反應性樹脂混合物的檢驗 | Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds |
| DIN 51290-3-1991 | 機器工程用反應性樹脂混凝土的檢驗.第3部分:分別制作試樣的檢驗 | Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens |
| DIN 51290-4-1991 | 機器工程用反應性樹脂混凝土的檢驗.第4部分:生產過程中和成品部件的檢驗 | Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; in-process testing and testing of final parts |
| DIN 53164 Bb.1-1988 | 顏料和填充料的試驗.白色顏料的相對擴散力的測定.背底法、程序、實施示例、試驗介質醇酸樹脂 | Testing of pigments and extenders; determination of relative scattering power of white pigments; black-ground method, procedure, example, test medium alkyd resin |
| DIN 53177-2002 | 涂料和清漆用粘合劑.液態樹脂動態粘度的測量.根據烏貝羅德(Ubbelohde)法采用等溫型毛細管粘度計測量樹脂溶 | Binders for paints and varnishes - Measurement of the dynamic viscosity of liquid resins; Resin solutions and oils by the capillary viscosimeter of isocelses type according to Ubbelohde |
| DIN 53180-1996 | 漆和類似涂料的粘結劑.樹脂軟化溫度測定 | Binders for paints and varnishes - Determination of the softening temperature of resins |
| DIN 53181-1991 | 漆油漆、清漆和類似涂料的粘結劑.用毛細方法測定樹脂溶化間隔時間 | Binders for paints, varnishes and similar coating materials; determination of the melting interval of resins by the capillary method |
| DIN 53238-30-1995 | 顏料和稀釋劑.色散性能的評估方法.第30部分:低黏度試驗介質醇酸樹脂系統.氧化干燥法 | Pigments and extenders - Method of assessment of ease of dispersion - Part 30: Test medium alkyd resin system, low viscous, hardening by air oxidation |
| DIN 53238-34-2002 | 顏料和填充劑.易分散性的評估方法.第34部分:低粘度烘干式試驗介質醇酸樹脂/三聚氰胺樹脂系統 III | Pigments and extenders - Method of assessment of ease of dispersion - Part 34: Test medium alkyd-/melamine resin system III, low viscous, stoving type |
| DIN 53394-1974 | 塑料的試驗.在模塑狀態下不飽和聚酯樹脂模塑材料中單體苯乙的百分比量的測定.用Wijs溶液法測定 | Testing of plastics; determination of the percentage of styrene in unsaturated polyester resin moulding material in the moulded state, test method with Wijs-solution |
| DIN 53394-2-1993 | 塑料的檢驗.以不飽合聚脂樹脂為基的反應模塑材料中苯乙烯百分含量的測定.氣相色譜法 | Testing of plastics; determination of the percentage of styrene in reaction moulding materials based on unsaturated polyester resins; gaschromatography method |
| DIN 53748-1970 | 酚醛-甲醛樹脂的化學分析.酚醛塑料模塑材料和模制材料 | Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials |
| DIN 54407-2003 | 離子交換樹脂的試驗.樹脂珠粒粒度分布的測定 | Testing of ion exchange resins - Determination of bead size distribution |
| DIN 54411-2004 | 離子交換器的檢驗.離子交換器和聚合物吸附樹脂的循環檢驗方法 | Testing of ion exchangers - Recycling method for testing ion exchangers and polymer adsorption resins |
| DIN 54813-1994 | 塑料檢驗.紡織玻璃纖維增強的聚酯樹脂塑料的連接試驗.用彎曲剪切試驗測定斷裂負荷 | Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test |
| DIN 54815-1-1998 | 填充聚酯樹脂模塑材料的管材.第1部分:尺寸、材料和標識 | Pipes of filled polyester resin moulding materials - Part 1: Dimensions, materials, designation |
| DIN 54815-2-1998 | 填充聚酯樹脂模塑材料的管材.第2部分:要求和試驗 | Pipes of filled polyester resin moulding materials - Part 2: Requirements, testings |
| DIN 55984 Bb.1-1989 | 顏料的試驗.白色和淺灰色介質的遮蓋力值的測定.使用白色醇酸樹脂漆的工藝過程實例 | Testing of pigments; determination of a hiding power value of white and light grey media; example for the procedure using a white alkyd paint |
| DIN 57291-2-1979 | 電纜配件用的化合物.在固化前和固化狀態時的澆注樹脂化合物(VDE規范) | Compounds for use in cable accessories; casting resinous compounds before cure and in the cured state [VDE Specification] |
| DIN 65065-1979 | 航空航天.纖維增強樹脂.技術規范 | Aerospace; resins for fiber reinforced, technical specification |
| DIN 65146-2-1991 | 航空航天.預浸漬的碳纖維長絲織物和環氧樹脂.技術規范 | Aerospace; preimpregnated woven fabric of carbon filament yarn and epoxy resin; technical specification |
| DIN 65383-1997 | 航空航天.結構用熱固環氧樹脂紡織玻璃纖維長絲織物預浸漬品.技術規范 | Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification |
| DIN 65426-2-1989 | 航空航天.芳族聚酰胺.第2部分:由高模數長絲紗線和環氧樹脂制成的長絲織物預浸漬體的技術規范 | Aerospace; aromatic polyamide (aramid); woven filament fabric prepreg from high-modulus filament yarn and epoxy resin; technical specification |
| DIN 65453-1993 | 航空航天.碳纖維和雙馬來酰亞胺樹脂或聚酰亞胺樹脂制的預浸漬不定向薄板材 | Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification |
| DIN 65467-1999 | 航空航天.帶和不帶增強物的熱固化樹脂系統的試驗.DSC方法 | Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method |
| DIN CEN/TS 14578-2003 | 給水或排水排污用塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GRP).安裝的推薦性實施規 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2003 |
| DIN CEN/TS 14807-2005 | 塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GRP).地下GRP-UP管道的結構分析指南 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004 |
| DIN EN 1013-2-1999 | 單層屋頂反光塑料型板.第2部分:玻璃纖維增強聚酯樹脂板(GF-UP)特殊要求和試驗方法 | Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP); German version EN 1013-2:1998 |
| DIN EN 12003-1997 | 瓷磚膠粘劑.反應性樹脂膠粘劑抗剪強度測定 | Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives; German version EN 12003:1997 |
| DIN EN 12808-1-1999 | 瓷磚膠粘劑和接縫灰漿.第1部分:反應性樹脂灰漿耐化學腐蝕性測定 | Adhesives and grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars; German version EN 12808-1:1999 |
| DIN EN 12873-3-2006 | 材料對人類生活用水的影響.離子遷移的影響.第3部分:離子交換和吸附樹脂的試驗方法 | Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins English version of DIN EN 12873-3:2006-06 |
| DIN EN 13366-2001 | 肥料.螯合的微量養料含量和微量養料的螯合系數測定用陽離子交換樹脂處理 | Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients; German version EN 13366:2001 |
| DIN EN 13411-4-2002 | 鋼絲繩接線端.安全性.第4部分:金屬和樹脂套接; 德文版本 EN 13411-4:2002 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing; German version EN 13411-4:2002 |
| DIN EN 14364-2006 | 壓力和無壓力排水和排污塑料管道系統.基于不飽和聚酯樹脂的玻璃增強熱固性塑料(GRP)系統.管件、配件和連接 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints English version of DIN EN 14364:2006-07 |
| DIN EN 1544-2007 | 保護和修復混凝土結構的產品和系統.試驗方法.測定用于加固鋼筋的合成樹脂產品(PC)在長期張力荷載下的蠕變 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars; English version of DIN EN 1544:2007-01 |
| DIN EN 1877-1-2000 | 混凝土結構保護和維修用產品和系統.試驗方法.與環氧樹脂相關的活性函數.第1部分:環氧基當量測定 | Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent; German version EN 1877-1:2000 |
| DIN EN 1877-2-2000 | 混凝土結構保護和維修用產品和系統.試驗方法.與環氧樹脂相關的活性成分.第2部分:通過總堿值測定氨成分 | Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; German version EN 1877-2:2000 |
| DIN EN 2259-1995 | 航空航天系列.硅樹脂橡膠(VMQ).硬度為 50 國際橡膠硬度標度; 德文版本 EN 2259:1995 | Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995 |
| DIN EN 2260-1995 | 航空航天系列.硅樹脂橡膠(VMQ).硬度為:60 國際橡膠硬度標度; 德文版本 EN 2260:1995 | Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995 |
| DIN EN 2261-1995 | 航空航天系列.硅樹脂橡膠(VMQ).硬度為:70 國際橡膠硬度標度; 德文版本 EN 2261:1995 | Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995 |
| DIN EN 2262-1995 | 航空航天系列.高撕裂強度的硅樹脂橡膠(VMQ/PVMQ).硬度為:50 國際橡膠硬度標度; 德文版本 EN 2262:1995 | Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995 |
| DIN EN 2331-1993 | 航空航天.紡織玻璃纖維預浸帶.測定樹脂含量、纖維含量以及單位面積纖維質量的試驗方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993 |
| DIN EN 2332-1993 | 航空航天.紡織玻璃纖維預浸帶.測定樹脂流動的試驗方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993 |
| DIN EN 2375-1992 | 航空航天.樹脂浸漬材料.產品的批取樣程序 | Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992 |
| DIN EN 2559-1997 | 航空航天系列.碳纖維預浸帶.樹脂成份、纖維成份以及單位面積纖維重量測定 | Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997 |
| DIN EN 2560-1998 | 航空航天系列.碳纖維預浸漬.樹脂流的測定 | Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998 |
| DIN EN 2564-1998 | 航空航天系列.碳纖維層壓塑料.纖維含量、樹脂含量和氣孔的測定 | Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998 |
| DIN EN 438-1-2005 | 裝飾用高壓層壓板(HPL).熱固性樹脂基板材(一般稱為層壓板).第1部分:說明和一般信息 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information; German version EN 438-1:2005 |
| DIN EN 438-2-2005 | 裝飾用高壓層壓板(HPL).熱固性樹脂基板材(一般稱為層壓板).第2部分:性能測定 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2005 |
| DIN EN 438-3-2005 | 裝飾用高壓層壓制件(HPL).基于熱固性樹脂的薄板材(通常稱為層壓制件).第3部分:用于粘結支撐基質的不足2毫米 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates; German version EN 438-3:2005 |
| DIN EN 438-4-2005 | 裝飾用高壓層壓制件(HPL).基于熱固性樹脂的薄板材(通常稱為層壓制件).第4部分:厚度為2毫米和大于2毫米的壓 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater; German version EN 438-4:2005 |
| DIN EN 438-5-2005 | 裝飾用高壓層壓制件(HPL).基于熱固性樹脂的薄板材(通常稱為層壓制件).第5部分:用于粘結支撐基質的厚度不足2 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates; German version EN 438-5:2005 |
| DIN EN 438-6-2005 | 裝飾用高壓層壓制件(HPL).基于熱固性樹脂的薄板材(通常稱為層壓制件).第6部分:大于和等于2毫米厚的外部用壓 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater; German version EN 438-6:2005 |
| DIN EN 438-7-2005 | 裝飾用高壓層壓制件(HPL).基于熱固性樹脂的薄板材(通常稱為層壓制件).第7部分:內墻、外墻和天棚用壓實層壓 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 50089-1994 | 金屬外殼充氣高壓開關設備和控制裝置用鑄造樹脂隔板; 德文版本 EN 50089:1992 | Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear; German version EN 50089:1992 |
| DIN EN 50089/A1-1995 | 金屬外殼充氣高壓開關設備和控制裝置用澆鑄樹脂隔板.修改件 A1; 德文版本 EN 50089:1992/A1:1994 | Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear; Amendment A1; German version EN 50089:1992/A1:1994 |
| DIN EN 60317-0-4-2006 | 特種繞組線規范.第0-4部分:一般要求.玻璃纖維繞組浸樹脂或浸清漆裸扁銅線或漆包扁銅線 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-4:1997 + A1:1999 + A2:2005); German version EN 60317-0-4:1998 + A1:2000 + A2:2005 |
| DIN EN 60317-0-5-2007 | 特種繞組線規范.第0-5部分:一般要求.玻璃纖維編織樹脂或浸漆的裸或漆包扁銅線 | Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-5:2006); German version EN 60317-0-5:2007 |
| DIN EN 60317-0-6-2007 | 特種繞組線規范.第0-6部分:一般要求.玻璃纖維包浸樹脂或浸清漆的裸圓銅線或漆包圓銅線 | Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001 + A1:2006); German version EN 60317-0-6:2001 + A1:2006 |
| DIN EN 60317-48-2000 | 特種繞組線規范.第48部分:溫度指數155的玻璃纖維纏繞樹脂或清漆浸漬裸圓銅線或漆包圓銅線 | Specification for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999); German version EN 60317-48:2000 |
| DIN EN 60317-49-2000 | 特種繞組線規范.第49部分:溫度指數180的玻璃纖維繞包樹脂或漆浸漬裸或漆包圓銅線 | Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:1999); German version EN 60317-49:2000 |
| DIN EN 60317-50-2000 | 特種繞組線規范.第50部分:溫度指數200的玻璃纖維繞包樹脂或漆浸漬裸或漆包圓銅線 | Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); German version EN 60317-50:2000 |
| DIN EN 60371-3-4-2007 | 云母基絕緣材料規范.第3部分:各型材料規范.第4節:用B級環氧樹脂粘合劑粘結的聚酯薄膜襯底云母紙(IEC 60371- | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-4:1992 + A1:2006); German version EN 60371-3-4:1995 + A1:2006 |
| DIN EN 60371-3-5 Berichtigung 1-2007 | 以云母為基材的絕緣材料.第5部分:單項材料規范.活頁5:后浸漬用環氧樹脂粘合玻璃布云母紙 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:2005); German version EN 60371-3-5:2006, Corrigenda to DIN EN 60371-3-5 (VDE 0332-3-5):2006-08; CENELEC-Corrigendum November 2006 to EN 60371-3-5:2006 |
| DIN EN 60371-3-5-2006 | 以云母為基材的絕緣材料.第3部分:單項材料規范.活頁5:后浸漬用玻璃布補強環氧樹脂粘合云母紙 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:2005); German version EN 60371-3-5:2006 |
| DIN EN 60371-3-6-2007 | 云母基絕緣材料規范.第3部分:各型材料規范.第6節:用B級環氧樹脂粘合劑粘結的玻璃襯底云母紙(IEC 60371-3-6: | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-6:1992 + A1:2006); German version EN 60371-3-6:1995 + A1:2006 |
| DIN EN 60371-3-7-2007 | 云母基絕緣材料規范.第3部分:各型材料規范.第7節:單導體膠帶用帶有環氧樹脂粘合劑的聚脂薄膜云母紙(IEC 603 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping (IEC 60371-3-7:1995 + A1:2006); German version EN 60371-3-7:1995 + A1:2006 |
| DIN EN 60455-1-1999 | 電器絕緣用以反應性化合物為基的樹脂.第1部分:定義和一般要求 | Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements (IEC 60455-1:1998); German version EN 60455-1:1998 |
| DIN EN 60455-2-2000 | 電器絕緣用樹脂基反應化合物.第2部分:試驗方法 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (IEC 60455-2:1998); German version EN 60455-2:1999 |
| DIN EN 60455-3-1-2004 | 電絕緣用樹脂基反應性復合物.第3部分:單項材料規范.活頁1:未填充環氧樹脂復合物 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds (IEC 60455-3-1:2003); German version EN 60455-3-1:2003 |
| DIN EN 60455-3-2-2004 | 電氣絕緣用樹脂基反應性復合物.第3部分:單項材料規范.活頁2:填石英的環氧樹脂復合物 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds (IEC 60455-3-2:2003); German version EN 60455-3-2:2003 |
| DIN EN 60455-3-3-2004 | 電氣絕緣用樹脂基反應性復合物.第3部分:單項材料規范.活頁3:未加填料的聚氨酯復合物 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds (IEC 60455-3-3:2003); German version EN 60455-3-3:2003 |
| DIN EN 60455-3-4-2004 | 電絕緣用樹脂基反應性復合物.第3部分:單項材料規范.活頁4:加填料的聚氨酯復合物 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds (IEC 60455-3-4:2003); German version EN 60455-3-4:2003 |
| DIN EN 60455-3-5-2006 | 電工絕緣用樹脂基反應性化合物.第3部分:專用材料規范:第5頁:不飽和聚酯基浸漬樹脂(IEC 60455-3-5:2006) | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins (IEC 60455-3-5:2006); German version EN 60455-3-5:2006 |
| DIN EN 60893-1-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第1部分:定義、名稱和一般要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 60893-1:2004); German version EN 60893-1:2004 |
| DIN EN 60893-2-2005 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第2部分:試驗方法 | Insulating materials - Industrial laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2003); German version EN 60893-2:2004 |
| DIN EN 60893-3-1 Bb.1-1996 | 電工用熱固性樹脂基工業剛性層壓板規范.類型比較 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Comparison of types |
| DIN EN 60893-3-1-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-1部分:專用材料規范.對工業硬質層壓片類型的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets (IEC 60893-3-1:2003); German version EN 60893-3-1:2004 |
| DIN EN 60893-3-2-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-2部分:專用材料規范.對環氧樹脂硬質層壓片的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003); German version EN 60893-3-2:2004 |
| DIN EN 60893-3-3-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-3部分:專用材料規范.對三聚氰胺樹脂硬質層壓片的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003); German version EN 60893-3-3:2004 |
| DIN EN 60893-3-4-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-4部分:專用材料規范.對酚醛樹脂硬質層壓片的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003); German version EN 60893-3-4:2004 |
| DIN EN 60893-3-5-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-5部分:專用材料規范.對聚酯樹脂硬質層壓片的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003); German version EN 60893-3-5:2004 |
| DIN EN 60893-3-6-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-6部分:專用材料規范.對硅樹脂硬質層壓片的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003); German version EN 60893-3-6:2004 |
| DIN EN 60893-3-7-2004 | 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-7部分:專用材料規范.對聚酰亞胺樹脂基硬質層壓片的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003); German version EN 60893-3-7:2004 |
| DIN EN 61212-1-2007 | 基于熱固樹脂的電氣用工業剛性圓形層壓管和棒材.第1部分:定義、名稱和一般要求 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 61212-1:2006); German version EN 61212-1:2006 |
| DIN EN 61212-2-2007 | 絕緣材料.電工用基于熱固樹脂的工業型剛性層壓圓管和棒材.第2部分:試驗方法(IEC 61212-2-2006) | Insulating Materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:2006); German version EN 61212-2:2006 |
| DIN EN 61212-3-1-2007 | 絕緣材料.基于熱固樹脂的電氣用工業剛性圓形層壓管和棒材.第3部分:單項材料規范.活頁1:圓形層壓液壓管(IEC | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:2006); German version EN 61212-3-1:2006 |
| DIN EN 61212-3-3-2007 | 絕緣材料.電工用工業剛性熱固樹脂層壓管和棒材.第3部分:各型材料規范.第3節:圓型模壓棒(IEC 61212-3-3:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006); German version EN 61212-3-3:2006 |
| DIN EN 61249-2-10-2004 | 印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.規定了易燃性的包銅的改良或未改良的氰酸酯 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-10:2003); German version EN 61249-2-10:2003 |
| DIN EN 61249-2-12-1999 | 印制板和其它互連結構用材料.第2-12部分:涂覆或未涂覆增強基材分規范集.規定可燃性的銅包被環氧樹脂非編織 | Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad; epoxide non-woven aramid laminate of defined flammability, copper-clad (IEC 61249-2-12:1999); German version EN 61249-2-12:1999 |
| DIN EN 61249-2-8-2004 | 印制板和其它互連結構用材料.第2-8部分:包被和非包被增強基材.規定了易燃性的包銅的改良溴化環氧樹脂編織玻 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-8:2003); German version EN 61249-2-8:2003 |
| DIN EN 61249-2-9-2004 | 印制板和其它互連結構用材料.第2-9部分:包被和非包被增強基材.規定了易燃性的包銅的二順丁烯二酰亞胺/三嗪 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-9:2003); German version EN 61249-2-9:2003 |
| DIN EN 62011-1-2003 | 絕緣材料.電氣設備用工業剛性模制矩形和六邊形橫截面熱固性樹脂基層壓管材和桿材.第1部分:定義、命名及一般 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 62011-1:2002); German version EN 62011-1:2002 |
| DIN EN 62011-2-2004 | 絕緣材料.電氣用途工業剛性模制矩形和六邊形橫截面的熱固性樹脂基層壓管材和桿材.第2部分:試驗方法 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 62011-2:2004); German version EN 62011-2:2004 |
| DIN EN 62011-3-1-2004 | 絕緣材料.電工用熱固性樹脂基矩形和六邊形橫截面的工業剛性模制層壓管材和桿材.第3-1部分:單項材料規范.矩 | Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section (IEC 62011-3-1:2003); German version EN 62011-3-1:2003 |
| DIN EN ISO 10082-2000 | 塑料.酚醛樹脂.分類和試驗方法 | Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999); German version EN ISO 10082:1999 |
| DIN EN ISO 10283-2007 | 涂料和清漆用粘合劑.異氰酸酯樹脂中二異氰酸酯單體的測定 | Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins (ISO 10283:2007); German version EN ISO 10283:2007 |
| DIN EN ISO 1060-1-2000 | 塑料.氯乙烯的均聚物和共聚物樹脂.第1部分:命名體系和規范基礎 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system and basis for specifications (ISO 1060-1:1998); German version EN ISO 1060-1:1999 |
| DIN EN ISO 1060-2-2000 | 塑料.氯乙烯的均聚物和共聚物樹脂.第2部分:試驗樣品的制備和性能的測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998); German version EN ISO 1060-2:1999 |
| DIN EN ISO 10618-2004 | 碳纖維.樹脂浸漬紗拉伸性能的測定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004); German version EN ISO 10618:2004 |
| DIN EN ISO 11401-1998 | 塑料.酚醛樹脂.用液相色譜法分離 | Plastics - Phenolic resins - Separation by liquid chromatography (ISO 11401:1993); German version EN ISO 11401:1998 |
| DIN EN ISO 11402 Berichtigung 1-2006 | 酚醛樹脂、氨基樹脂和縮合樹脂.游離甲醛含量的測定 | Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version EN ISO 11402:2005, Corrigenda to DIN EN ISO 11402:2005-09; German version EN ISO 11402:2005/AC:2006 |
| DIN EN ISO 11402-2005 | 酚醛樹脂、氨基樹脂和縮合樹脂.游離甲醛含量的測定 | Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version of EN ISO 11402:2005 |
| DIN EN ISO 11409-1998 | 塑料.酚醛樹脂.用差示掃描量熱法測定反應熱和溫度 | Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998 |
| DIN EN ISO 11667-1999 | 纖維增強塑料.模塑化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量的測定.溶解方法 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999 |
| DIN EN ISO 11668-2001 | 涂料和清漆用粘粘劑.氯化聚合樹脂.通用試驗方法 | Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997); German version EN ISO 11668:2001 |
| DIN EN ISO 11908-1998 | 油漆和清漆用粘合劑.胺樹脂.一般試驗法 | Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996); German version EN ISO 11908:1998 |
| DIN EN ISO 11909-2007 | 涂料和清漆用粘合劑.聚亞安酯樹脂.通用試驗方法 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007); German version EN ISO 11909:2007 |
| DIN EN ISO 12215-1-2001 | 小型船舶.船體建造和草圖.第1部分:材料.玻璃纖維增強熱固樹脂標準層壓板 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000 |
| DIN EN ISO 1264-1997 | 塑料.氯乙烯的均聚物和共聚物樹脂.水萃物的pH值測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980); German version EN ISO 1264:1997 |
| DIN EN ISO 1265-2007 | 塑料.聚氯乙烯樹脂.雜質和雜質粒子數量的測定 | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007); German version EN ISO 1265:2007 |
| DIN EN ISO 1269-2007 | 塑料.氯乙烯均聚物和共聚物樹脂.揮發性物質(包括水)的測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006); English version of DIN EN ISO 1269:2007-02 |
| DIN EN ISO 15252-1-2000 | 塑料.環氧樹脂模塑化合物(EP-PMCs).第1部分:命名系統和基本規范 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999 |
| DIN EN ISO 15252-2-2000 | 塑料.環氧樹脂粉末模塑化合物(EP-PMCs).第2部分:試樣的制備和特性的測定 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999 |
| DIN EN ISO 15252-3-2000 | 塑料.環氧樹脂粉末模塑化合物(EP-PMCs).第3部分:對所選模塑化合物的要求 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999 |
| DIN EN ISO 1624-2002 | 塑料制品.氯乙烯均聚物和共聚物樹脂.水濾篩析 (ISO 1624:2001); 德文版本 EN ISO 1624:2001 | Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001); German version EN ISO 1624:2001 |
| DIN EN ISO 1628-2-1999 | 塑料.用毛細管粘度計測定稀釋溶液中聚合物的粘度.第2部分:聚氯乙烯樹脂 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998); German version EN ISO 1628-2:1998 |
| DIN EN ISO 1675-1998 | 塑料.液態樹脂.用比重計法測定濃度 | Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985); German version EN ISO 1675:1998 |
| DIN EN ISO 2114 Berichtigung 1-2006 | 塑料制品(聚脂樹脂)、涂料和清漆(粘合劑).部分酸值和總酸值的測定(ISO 2114:2000) | Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000, Corrigenda to DIN EN ISO 2114:2002-06; German version EN ISO 2114:2000/AC:2005 |
| DIN EN ISO 2114-2002 | 塑料制品(聚酯樹脂)和涂料清漆(粘合劑).局部和全部酸值的測定 (ISO 2114:2000); 德文版本 EN ISO 2114:2000 | Plastics (polyester resins) and paints varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000 |
| DIN EN ISO 21627-1-2004 | 塑料.環氧樹脂.氯含量的測定.第1部分:無機氯 | Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2002); German version EN ISO 21627-1:2003 |
| DIN EN ISO 21627-2-2004 | 塑料.環氧樹脂.氯含量的測定.第2部分:易皂化的氯 | Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2002); German version EN ISO 21627-2:2003 |
| DIN EN ISO 21627-3-2004 | 塑料.環氧樹脂.氯含量的測定.第3部分:總氯量 | Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2002); German version EN ISO 21627-3:2003 |
| DIN EN ISO 2535-2003 | 塑料.不飽和聚酯樹脂.室溫膠凝時間測量 | Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002 |
| DIN EN ISO 2554-1998 | 塑料.不飽和聚酯樹脂.羥基值的測定 | Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998 |
| DIN EN ISO 2555-2000 | 塑料.液態或乳態或分散狀的樹脂.用布洛克非爾德試驗測定表面粘度 | Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method (ISO 2555:1989); German version EN ISO 2555:1999 |
| DIN EN ISO 308-1998 | 塑料.酚醛樹脂模塑材料.丙酮可溶物質的測定(未模塑材料的表面樹脂含量) | Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997 |
| DIN EN ISO 3219-1994 | 塑料制品.液態或乳液或漂移的聚合物/樹脂.使用規定剪切率的旋轉式粘度計測定粘度 (ISO 3219:1993); 德文版 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993); German version EN ISO 3219:1994 |
| DIN EN ISO 3521-1999 | 塑料.不飽和聚酯和環氧樹脂.體積的總收縮量的測定 | Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999 |
| DIN EN ISO 3672-1-2002 | 塑料制品.不飽和的聚酯樹脂.第1部分:標識體系 (ISO 3672-1:2000); 德文版本 EN ISO 3672-1:2001 | Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000); German version EN ISO 3672-1:2001 |
| DIN EN ISO 3672-2-2002 | 塑料制品.不飽和的聚酯樹脂.第2部分:試樣制備和性能測定 (ISO 3672-2:2000); 德文版本 EN ISO 3672-2:2001 | Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001 |
| DIN EN ISO 3673-1-1999 | 塑料.環氧樹脂.第1部分:命名 | Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999 |
| DIN EN ISO 3673-2-2000 | 塑料.環氧樹脂.第2部分:試驗樣品的制備和特性的測定 | Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999 |
| DIN EN ISO 4597-1-1998 | 塑料.環氧樹脂的固化劑和促進劑.第1部分:命名 | Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983); German version EN ISO 4597-1:1997 |
| DIN EN ISO 4608-1998 | 塑料.一般用途的氯乙烯均聚物和共聚物樹脂.室溫下增塑劑吸收性的測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998); German version EN ISO 4608:1998 |
| DIN EN ISO 4610-2002 | 塑料制品.氯乙烯均聚物和共聚物樹脂.使用氣噴式篩濾器械的篩選分析 (ISO 4610:2001); 德文版本 EN ISO 4610 | Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001); German version EN ISO 4610:2001 |
| DIN EN ISO 4615-2000 | 塑料.不飽和聚酯和環氧樹脂.氯總含量的測定 | Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979); German version EN ISO 4615:1999 |
| DIN EN ISO 4895-1999 | 塑料.液態環氧樹脂.結晶趨向的測定 | Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997); German version EN ISO 4895:1999 |
| DIN EN ISO 584-1998 | 塑料.未飽和的聚酯樹脂.80℃時反應性的測定(常規方法) | Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982); German version EN ISO 584:1997 |
| DIN EN ISO 6401-2005 | 塑料.氯乙烯均聚物和共聚物樹脂.剩余氯乙烯單體的測定.氣相色譜法 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method (ISO 6401:1985); German version EN ISO 6401:2004 |
| DIN EN ISO 6744-1-2004 | 色漆和清漆用粘合劑.醇酸樹脂.第1部分:通用試驗方法 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999); German version EN ISO 6744-1:2004 |
| DIN EN ISO 6744-2-2004 | 色漆和清漆用粘合劑.醇酸樹脂.第2部分:鄰苯二甲酸酐含量的測定 | Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999); German version EN ISO 6744-2:2004 |
| DIN EN ISO 6744-3-2004 | 色漆和清漆用粘合劑.醇酸樹脂.第3部分:非皂化物含量的測定 | Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999); German version EN ISO 6744-3:2004 |
| DIN EN ISO 6744-4-2004 | 色漆和清漆用粘合劑.醇酸樹脂.第4部分:脂肪酸含量的測定 | Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999); German version EN ISO 6744-4:2004 |
| DIN EN ISO 6874-2005 | 牙科學.樹脂基窩溝和裂紋封閉劑 | Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2005); German version EN ISO 6874:2005 |
| DIN EN ISO 7142-2007 | 涂料和清漆用粘合劑.環氧樹脂.通用試驗方法 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007); German version EN ISO 7142:2007 |
| DIN EN ISO 7327-1997 | 塑料.環氧樹脂固化劑和催化劑.酸酐中游離酸測定 | Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997 |
| DIN EN ISO 8619-2005 | 塑料.酚醛樹脂粉.在加熱玻璃板上流動距離的測定 | Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:2003); German version EN ISO 8619:2004 |
| DIN EN ISO 8974-2002 | 塑料制品.酚醛樹脂.采用氣相色譜法對殘余酚含量的測定 (ISO 8974:2002); 德文版本 EN ISO 8974:2002 | Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002); German version EN ISO 8974:2002 |
| DIN EN ISO 8987-2005 | 塑料.酚醛樹脂.在B轉變?cè)囼?yàn)板上的活化性能的測定 | Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005); German version EN ISO 8987:2005 |
| DIN EN ISO 8988-2006 | 塑料.酚醛樹脂.六亞甲基四胺含量測定.基耶達斯法、高氯酸法和氯化氫酸法(ISO 8988-2006) | Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method, perchloric acid method and hydrochloric acid method (ISO 8988:2006); English version of DIN EN ISO 8988:2006-11 |
| DIN EN ISO 8989-1998 | 塑料.酚醛樹脂.水溶物的測定 | Plastics - Phenolic resins - Determination of water miscibility (ISO 8989:1995); German version EN ISO 8989:1998 |
| DIN EN ISO 9396-2001 | 塑料.酚醛樹脂.用自動裝置在規定條件下對酚醛樹脂膠凝時間的測定 | Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000 |
| DIN EN ISO 9771-1997 | 塑料.酚醛樹脂.酸性條件處理時液體酚醛樹脂假絕熱溫升測定 | Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997 |
| DIN ISO 8975-1992 | 塑料.酚醛樹脂.pH值的測定 | Plastics; phenolic resins; determination of pH; identical with ISO 8975:1989 |
| DIN ISO 9944-1992 | 塑料.酚醛樹脂.樹脂萃取物電導率的測定 | Plastics; phenolic resins; determination of electrical conductivity of resin extracts; identical with ISO 9944:1990 |
| DIN VDE 0250-502-1985 | 電力設施用電纜、電線和絕緣導線.耐熱硅樹脂燈頭接線 | Cables, wires and flexible cords for power installation; heat-resistant silicone wire |
| DIN VDE 0278-629-2-2007 | 額定電壓范圍為3.6/6(7.2)kV～20.8/36(42)kV的電力電纜用配件的試驗要求.第2部分:樹脂浸漬紙絕緣電纜 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation; German version HD 629.2 S2:2006 |
| DIN VDE 0278-631-1-1999 | 材料特性.第1部分;電纜附件中用的混合料.固化前和固化狀態下的樹脂狀混合料 | Material characterisation - Part 1: Compounds for use in cable accessories: Resinous compounds before cure and in the cured state; German version HD 631.1.S1:1998 |
| DIN VDE 0291-2-1979 | 電纜附件用的化合物.在固化前和固化狀態時的澆注樹脂化合物 | Compounds for use in cable accessories; casting resinous compounds before cure and in the cured state VDE Specification |
| 編號 | 中文名稱 | 英文名稱 |