| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI A10.12-1998
| 挖土的安全要求
| Safety Requirements for Excavation
|
| ANSI A10.13-2001
| 鋼結構安裝的安全要求
| Safety Requirements for Steel Erection
|
| ANSI A10.15-1995
| 建筑施工和拆除工作.挖泥作業的安全要求
| Construction and Demolition Operations - Dredging, Safety Requirements for
|
| ANSI A10.16-1995
| 建筑施工和拆除工作.隧道、豎井和藻井的安全要求
| Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons
|
| ANSI A10.18-1996
| 建筑施工和拆除工作.臨時腳踏板和墻口、樓梯和其他無保護邊緣的安全要求
| Construction and Demolition Operations - Safety Requirements for Temporary Floor Holes, Wall Openings, Stairways and Other Unprotected Edges
|
| ANSI A10.20-2005
| 瓷磚、水磨石和大理石作業的安全要求
| Safety Requirements for Ceramic Tile, Terrazo, and Marble Work
|
| ANSI A10.22-1990
| 帶導向繩索和非導向繩索的載人用升降機.安全要求
| Rope-Guided and Nonguided Worker's Hoists - Safety Requirements
|
| ANSI A10.24-2006
| 屋面材料.低斜坡屋面的安全要求
| Roofing - Safety Requirements for Low-Sloped Roofs
|
| ANSI A10.27-1998
| 熱混瀝青設備的安全要求
| Safety Requirements for Hot Mix Asphalt Facilities
|
| ANSI A10.28-1998
| 起重機或轉臂起重機的懸吊工作平臺.安全要求
| Work Platforms Suspended from Cranes or Derricks - Safety Requirements
|
| ANSI A10.32-2004
| 建設和拆毀工作中防人員跌落的安全要求
| Personal Fall Protection Safety Requirements for Construction, Demolition Operations
|
| ANSI A10.4-2004
| 載人升降機和雇員用電梯的安全要求
| Safety Requirements for Personnel Hoists and Employee Elevators
|
| ANSI A10.7-1998
| 建筑施工和拆除.商業炸藥和起爆劑.運輸、存儲、裝卸和使用的安全要求
| Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use
|
| ANSI A10.8-2001
| 腳手架的安全要求
| Safety Requirements for Scaffolding
|
| ANSI A14.1-2000
| 樓梯.便攜式木梯的安全要求
| Ladders - Portable Wood, Safety Requirements for
|
| ANSI A14.2-2000
| 便攜式金屬梯的安全要求
| Portable Metal Ladders, Safety Requirements for
|
| ANSI A14.3-2002
| 木梯.固定安全要求
| Ladders - Fixed - Safety Requirements
|
| ANSI A14.4-2002
| 工地用木梯的安全要求
| Job-Made Wooden Ladders, Safety Requirements for
|
| ANSI A14.5-2000
| 樓梯.便攜式增強塑料的安全要求
| Ladders - Portable Reinforced Plastic - Safety Requirements
|
| ANSI A14.9-2004
| 吊裝暗式爬高系統的安全要求
| Safety Requirements for Ceiling Mounted Disappearing Climbing Systems
|
| ANSI ASBZ 50.1-2006
| 面包店設備.安全要求
| Bakery Equipment - Safety Requirements
|
| ANSI ATIS0300276.a-2005
| 操作、管理、維護和保障.公共通信網絡的安全要求:作為阻止有害通信的包過濾附加要求的管理平面用安全要求基
| Operations, Administration, Maintenance, and Provisioning - Security Requirements for the Public Telecommunications Network: A Baseline of Security Requirements for the Management Plane, to add requirements to support Packet Filtering for the Prevention of Unwanted Traffic
|
| ANSI B11.1-2001
| 機床.機械動力壓力機.制造、維護和使用的安全要求
| Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care, and Use
|
| ANSI B11.10-2003
| 金屬鋸床的制造、維護和使用的安全要求
| Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of
|
| ANSI B11.11-2001
| 齒輪切割機的制造、維護和使用的安全要求
| Gear Cutting Machines, Safety Requirements for the Construction, Care, and Use of
|
| ANSI B11.12-2005
| 機床.滾軋成型和滾軋彎曲機床.制造、維護和使用的安全要求
| Machine Tools - Roll-Forming and Roll-Bending Machines - Safety Requirements for the Construction, Care, and Use
|
| ANSI B11.13-1992
| 機床.單軸、多軸自動棒材、卡盤機床.制造、維護和使用的安全要求
| Machine Tools - Single- and Multiple-Spindle Automatic Bar and Chucking Machines - Safety Requirements for Construction, Care and Use
|
| ANSI B11.14-1996
| 機床.卷材縱向切分機的制造、維護和使用的安全要求
| Machine Tools - Coil-Slitting Machines Safety Reqirements for Construction, Care, and Use
|
| ANSI B11.15-2001
| 管道和型材彎曲機的制造、維護和使用的安全要求
| Pipe, Tube, and Shape Bending Machines, Safety Requirements for Construction, Care, and Use
|
| ANSI B11.16-2003
| 粉末/金屬壓力機的安全要求
| Safety Requirements for Powder / Metal Compacting Presses
|
| ANSI B11.17-2004
| 機床.臥式液力擠壓機的制造、維護和使用的安全要求
| Machine Tools - Horizontal Hydraulic Extrusion Presses,- Safety Requirements for Construction, Care, and Use
|
| ANSI B11.20-2004
| 機床.生產系統/元件.制造、維護和使用的安全要求
| Machine Tools - Manufacturing Systems/Cells - Safety Requirements for Construction, Care, and Use
|
| ANSI B11.22-2001
| 旋轉中心和自動數控旋轉機器的安全要求
| Safety Requirements for Turning Centers and Automatic Numerically Controlled Turning Machines
|
| ANSI B11.23-2001
| 組合加工中心機床和自動數控銑床、鉆床和鏜床的安全要求
| Safety Requirements for Machining Centers and Automatic Numerically Controlled Milling, Drilling and Boring Machines
|
| ANSI B11.24-2001
| 轉印機的安全要求
| Safety Requirements for Transfer Machines
|
| ANSI B11.3-2002
| 動力壓力制動器的制造、維護和使用的安全要求
| Power Press Brakes, Safety Requirements for the Construction, Care, and Use of
|
| ANSI B11.4-2003
| 機床.剪床的安全要求
| Machine Tools - Safety Requirements for Shears
|
| ANSI B11.5-1988
| 機床.鋼鐵制品.制造、維護和使用的安全要求
| Machine Tools - Ironworkers - Safety Requirements for Construction, Care and Use
|
| ANSI B11.6-2001
| 車床的制造、維護和使用的安全要求
| Lathes, Safety Requirements for the Construction, Care, and Use of
|
| ANSI B11.8-2001
| 鉆床、銑床和鏜床的制造、維護和使用的安全要求
| Drilling, Milling, and Boring Machines, Safety Requirements for the Construction, Care, and Use of
|
| ANSI B11.9-1975
| 機床.磨床的制造、維護和使用的安全要求
| Safety Requirements for the Construction, Care and Use of Grinding Machines
|
| ANSI B151.15-1985
| 塑料機械.擠注吹塑機.制造,維護和使用的安全要求
| Plastics Machinery - Extrusion Blow Molding Machines - Safety Requirements for Construction, Care and Use
|
| ANSI B154.1-2004
| 鉚接設備制造、維護和使用的安全要求
| Rivet Setting Equipment, Safety Requirements for Construction, Care, and Use of
|
| ANSI B165.1-2005
| 電動工具.電驅動涂刷工具.設計、保養和使用的安全要求
| Power Tools - Power-Driven Brushing Tools - Safety Requirements for Design, Care, and Use
|
| ANSI B175.1-2000
| 汽油動力鏈鋸的安全要求
| Gasoline Powered Chain Saws, Safety Requirements for
|
| ANSI B175.4-2006
| 便攜式、手持式、內燃機驅動切割機的安全要求
| Portable, Handheld, Internal Combustion Engine Driven Cut-Off Machines - Safety Requirements
|
| ANSI B65.2-2005
| 圖形技術.裝訂及精整系統和設備的安全要求
| Graphic technology - Safety requirements for binding and finishing systems and equipment
|
| ANSI B7.7-2003
| 涂磨料的研磨材料的安全要求
| Safety Requirements for Abrading Materials with Coated Abrasives Systems
|
| ANSI B71.4-2004
| 商用草皮維護設備.安全要求
| Commercial Turf Care Equipment - Safety Specifications
|
| ANSI B77.2-2004
| 纜車.安全要求
| Funiculars - Safety Requirements
|
| ANSI K61.1-1999
| 無水氨存儲和搬運的安全要求
| Safety Requirements for the Storage and Handling of Anhydrous Ammonia
|
| ANSI MH29.2-2000
| 工業用傾斜架的安全要求
| Safety Requirements for Industrial Tilters
|
| ANSI O1.1-2004
| 木工機械.安全要求
| Woodworking Machinery - Safety Requirements
|
| ANSI PH3.61-1974
| 消費者用攝影幻燈片放映機的安全要求
| Safety Requirements for Photographic Slide Projectors for Consumer Use
|
| ANSI SNT 101-2002
| 動力工具.便攜式壓縮空氣驅動的緊固件旋入工具的安全要求
| Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for
|
| ANSI SNT-101-1993
| 動力工具.便攜式壓縮空氣驅動的緊固驅動工具.安全要求
| Power Tools - Portable, Compressed-Air-Actuated, Fastener Driving Tools - Safety Requirements for
|
| ANSI SNT101-2002
| 動力工具.便攜式壓縮空氣驅動的緊固件旋鋸安全要求
| Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for
|
| ANSI T1.276-2003
| 操作、管理、維護和保障.公用電信網的安全要求:管理面的安全要求基線
| Operations, Administration, Maintenance, and Provisioning - Security Requirements for the Public Telecommunications Network: A Baseline of Security Requirements for the Management Plane
|
| ANSI Z117.1-2003
| 有限空間的安全要求
| Safety Requirements for Confined Spaces
|
| ANSI Z244.1-2003
| 能源的切斷/警告標記的安全要求
| Lock Out/Tag Out of Energy Sources, Safety Requirements for the
|
| ANSI Z245.1-1999
| 垃圾的收集、處理和處置設備.移動式垃圾收集和壓實設備.安全要求
| Refuse Collection, Processing, and Disposal Equipment - Mobile Refuse Collection and Compaction Equipment - Safety Requirements
|
| ANSI Z245.2-1997
| 廢物和可循環材料用設備技術和運行.固定式壓縮機.安全要求.
| Equipment Technology and Operations for Wastes and Recyclable Materials -Stationary Compactors - Safety Requirements
|
| ANSI Z245.30-1999
| 垃圾的收集、處理和處置設備.垃圾箱.安全要求
| Refuse Collection, Processing, and Disposal Equipment - Waste Containers - Safety Requirements
|
| ANSI Z245.41-1997
| 廢物和可循環材料的設備技術和運行.混合可再循環材料的加工設施.安全要求
| Equipment Technology and Operations for Wastes and Recyclable Materials - Facilities for the Processing of Commingled Recyclable Materials - Safety Requirements
|
| ANSI Z245.5-1997
| 廢物和可循環材料的設備技術和運行.打包設備.安全要求
| Equipment Technology and Operations for Wastes and Recyclable Materials - Baling Equipment - Safety Requirements
|
| ANSI Z8.1-1996
| 商業洗衣房和干洗操作.安全要求
| Commercial laundry and drycleaning operations - Safety requirements
|
| ANSI/ALI ALIS-2001
| 自動提升機.安裝和運行的安全要求
| Automotive Lifts - Safety Requirements for Installation and Service
|
| ANSI/ALI ALOIM-2000
| 自動電梯.操作、檢測和維護的安全要求
| Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance
|
| ANSI/ALI B153.1-1990
| 自動升降機.建造、保養和使用的安全要求
| Automotive Lifts - Safety Requirements for the Construction, Care, and Use
|
| ANSI/ASME B107.41M-2004
| 釘錘.安全要求
| Nail Hammers - Safety Requirements
|
| ANSI/ASME B107.42M-1997
| 手斧.安全要求
| Hatchets - Safety Requirements
|
| ANSI/ASME B107.43M-1998
| 木材劈裂楔.安全要求
| Wood Splitting Wedges - Safety Requirements
|
| ANSI/ASME B107.44M-2002
| 玻璃匠鑿和木工鑿.安全要求
| Glaziers' Chisels and Wood Chisels - Safety Requirements
|
| ANSI/ASME B107.45M-2002
| 細長鑿和地板/電工用鑿.安全要求
| Ripping Chisels and Flooring/Electricians' Chisels - Safety Requirements
|
| ANSI/ASME B107.46M-2004
| 螺柱、螺釘和管取出器.安全要求
| Stud, Screw and Pipe Extractors - Safety Requirements
|
| ANSI/ASME B107.48-2005
| 金屬鑿、鑿孔機和沖釘:安全要求
| Metal Chisels, Punches, and Drift Pins: Safety Requirements
|
| ANSI/ASME B107.49M-2004
| 釘子.安全要求
| Nail Sets - Safety Requirements
|
| ANSI/ASME B107.50M-1998
| 手工工具.磚鑿和劈磚枕墊.安全要求
| Hand Tools - Brick Chisels and Brick Sets - Safety Requirements
|
| ANSI/ASME B107.51-2001
| 星形鉆頭.安全要求
| Star Drills - Safety Requirements
|
| ANSI/ASME B107.52M-1998
| 拔釘器棒.安全要求
| Nail-Puller Bars - Safety Requirements
|
| ANSI/ASME B107.53M-2004
| 手工工具.圓頭錘.安全要求
| Hand Tools - Ball Peen Hammers - Safety Requirements
|
| ANSI/ASME B107.54-2001
| 重?fù)艄ぞ?安全要求
| Heavy Striking Tools - Safety Requirements
|
| ANSI/ASME B107.56-1999
| 殼體修理錘和墊塊:安全要求
| Body Repair Hammers and Dolly Blocks: Safety Requirements
|
| ANSI/ASME B107.58M-1998
| 鉚錘、敲除水垢用錘和錫工用小錘.安全要求
| Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements
|
| ANSI/ASSE A10.5-2006
| 物料升降機安全要求
| Safety Requirements for Material Hoists
|
| ANSI/ASTM F2173-2002
| 監測病人呼吸混合物的氧監測器.安全要求
| ISO 7767, Oxygen Monitors for Monitoring Patient Breathing Mixtures - Safety Requirements
|
| ANSI/ASTM F2265-2003
| 醫用抽吸設備.第1部分:電動抽吸設備.安全要求
| Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements
|
| ANSI/HTI B173.4-1991
| 斧子.安全要求
| Axes - Safety Requirements
|
| ANSI/HTI B173.8-1991
| 鉚接、定標和白鐵工鉚釘錘.安全要求
| Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements
|
| ANSI/HTI B209.2-1991
| 手工工具.金屬沖頭和尖沖釘.安全要求
| Hand Tools - Metal Punches and Drift Pins - Safety Requirements
|
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005
| 測量、控制和實驗室用電氣設備的安全要求.第1部分:一般要求
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements
|
| ANSI/ISA S82.02.02-1996
| 測量、控制和實驗室用電氣設備的安全要求
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use
|
| ANSI/ISA S82.02.04-1996
| 測量、控制和實驗室用電氣設備的安全要求.第2-032部分:電測量和試驗用手持電流線夾的特殊要求
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test
|
| ANSI/NFPA 70E-2004
| 員工工作場所的電氣安全要求
| Electrical Safety Requirements for Employee Workplaces
|
| ANSI/SPI B151.1-1997
| 塑料機械.臥式注射成型機.制造、維護和使用的安全要求
| Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use
|
| ANSI/SPI B151.27-2003
| 塑料機械.與臥式注射成型機一起使用的機器人.集成、維護和使用的安全要求
| Plastics Machinery - Robots Used with Horizontal Injection Molding Machines - Safety Requirements for the Integration, Care, and Use
|
| ANSI/SPI B151.29-2002
| 垂直夾緊注模機的制造、保養和使用安全要求
| Safety Requirements for the Manufacture, Care and Use of Vertical Clamp Injection Molding Machines
|
| ANSI/TIA-102AACA-1-2002
| 項目25.數字無線電發射密鑰更換(OTAR)協議.修改件1.第3類分組加密算法的密鑰管理安全要求
| Project 25 - Digital Radio Over the Air Rekeying (OTAR) Protocol - Addendum 1 - Key Management Security Requirements for Type 3 Block Encryption Algorithms
|
| ANSI/TIA/EIA 102AACA-1-2002
| 項目25.數字無線電遠程再加密(OTAR)協議.附錄1.類型3塊加密算法的密鑰管理安全要求
| Project 25 - Digital Radio Over the Air Rekeying (OTAR) Protocol - Addendum 1 - Key Management Security Requirements for Type 3 Block Encryption Algorithms
|
| ANSI/UL 1709-2005
| 結構鋼防護材料的快速升溫燃燒試驗的安全要求
| Standard for Safety for Rapid Rise Fire Tests of Protection Materials for Structural Steel
|
| ANSI/UL 60065-2006
| 音頻、視頻與類似電子儀器.安全要求
| Audio, Video and Similar Electronic Apparatus - Safety Requirements
|
| ASME A120.1-2001
| 建筑物維修用電動升降平臺的安全要求
| (Safety requirements for powered platforms for building maintenance)
|
| ASME A39.1 Interpretations-199
| 窗戶清洗的安全要求.說明
| (Interpretations: Safety requirements for window cleaning)
|
| ASME A39.1-1995
| 窗戶清洗的安全要求
| (Safety requirements for window cleaning)
|
| ASME A39.1b Addenda-1997
| 窗戶清洗的安全要求.附錄
| (Safety requirements for window cleaning; Addenda)
|
| ASME B107.51-2001
| 星形鉆頭.安全要求
| (Star drills - Safety requirements)
|
| ASME B107.55-2002
| 斧子.安全要求
| (Axes - Safety Requirements)
|
| ASTM ANS/ISO 10079-1-1999
| 醫療吸引設備.第1部分:電動吸引設備.與美國國家標準有偏差的ASTM國際標準認可的安全要求
| Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements Approved as an American National Standard with Deviations by ASTM International
|
| ASTM ANS/ISO 7767-1997
| 與美國國家標準有偏差的ASTM國際標準認可的監視病人呼吸混合物的氧氣監視器的安全要求
| Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements Approved as an American National Standard with Deviations by ASTM International
|
| ASTM E 2349-2005
| 金屬鑄造操作中安全要求的標準實施規程:型砂制備、制模和制型心;熔化和灌注;清潔和精整
| Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
|
| ASTM F 1208-1989
| 麻醉呼吸系統的最低性能和安全要求用標準規范
| Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems
|
| ASTM F 920-1993
| 人用復蘇器的最低性能和安全要求
| Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans
|
| ASTM/ISO 10079-1-1999
| 醫療抽吸設備.第1部分:電動抽吸設備.安全要求
| Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements
|
| ASTM/ISO 7767-1997
| 監控病人呼吸混合物的氧分析儀的安全要求
| Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements
|
| UL 60065-2003
| 音頻、視頻及類似電子設備.安全要求
| (Audio, video and similar electronic apparatus - Safety requirements)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|