| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 1892-3-2003
| 體育館器械.運動墊.體操用墊子、排墊和落地墊的安全要求規范
| Gymnasium equipment - Sports mats - Specification for fire safety requirements for mats, mattresses and landing areas
|
| BS 4533-102.19-1990
| 燈具.第102部分:專門要求.第19節:空氣調節燈具(安全要求)規范
| Luminaires - Part 102: Particular requirements - Section 102.19 Specification for air-handling luminaires (safety requirements)
|
| BS 5667-11-1979
| 連續式機械裝卸設備規范.安全要求.第11部分:成組貨件:帶臥式軸的固定金屬或木質板條輸送機
| Specification for continuous mechanical handling equipment - safety requirements - Unit loads: fixed slat conveyors (metal or wood) with horizontal shafts
|
| BS 5667-19-1980
| 連續式機械搬運設備規范.安全要求.帶式輸送機.嚙合點保護示例
| Specification for continuous mechanical handling equipment - safety requirements - Belt conveyors - examples for guarding of nip points
|
| BS 5667-1980
| 連續式機械裝卸設備規范.安全要求.第19部分:帶式輸送機-嚙合點保護示例
| Specification for continuous mechanical handling equipment - safety requirements. Belt conveyors - examples for guarding of nip points
|
| BS 7173-1989
| 通用照明設備安全要求的自鎮流燈具規范
| Specification for self-ballasted lamps for general lighting services safety requirements
|
| BS 7423-1999
| 床身長度不小于900mm的兒童旅行帆布床安全要求規范
| Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
|
| BS 7972-2001
| 家用兒童床護欄的安全要求和試驗方法
| Safety requirements and test methods for children's bedguards for domestic use
|
| BS CWA 14167-1-2003
| 電子簽名用可靠系統管理認證的安全要求.系統安全要求
| Security requirements for trustworthy systems managing certificates for electronic signatures - System security requirements
|
| BS CWA 14170-2004
| 簽名生成安全要求
| Security requirements for signature creation applications
|
| BS CWA 14174-3-2004
| 金融交易IC卡閱讀器(FINREAD).安全要求
| Financial transactional IC card reader (FINREAD) - Security requirements
|
| BS CWA 14842-3-2003
| 電子商務.商店的展示和交易.ICT安全要求
| Electronic commerce - Shop presentation and transactions - ICT security requirements
|
| BS DD CEN/TS 13778-2005
| 移動式拆除機械.安全要求
| Mobile demolition machinery - Safety requirements
|
| BS DD IEC/PAS 62267-2006
| 鐵路設施.自動城市制導運輸(AUGT).安全要求
| Railway applications - Automated Urban Guided Transport (AUGT) safety requirements
|
| BS DD ISO/TS 22559-1-2004
| 升降機(電梯)的安全要求.升降機(電梯)全球安全要求(GESR's)
| Safety requirements for lifts (elevators) - Global safety requirements (GESR's) for lifts (elevators
|
| BS EN 1010-1-2004
| 機械安全.印刷和紙加工機械的設計和建造的安全要求.通用要求
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Common requirements
|
| BS EN 1010-2-2006
| 機械安全性.印刷機和換紙機的設計和建造的安全要求.包括預壓機械的印刷機和涂漆機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Printing and varnishing machines including pre-press machinery
|
| BS EN 1010-3-2003
| 機械安全.印刷和紙加工機械的設計和制造的安全要求.切紙機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines
|
| BS EN 1010-4-2004
| 機械安全.設計和生產打印機和紙加工機的安全要求.裝訂機、紙加工機和裝飾機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Bookbinding, paper converting and finishing machines
|
| BS EN 1034-14-2005
| 機械安全.紙張制造和整飾機械設計和建造的安全要求.卷紙切紙機
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter
|
| BS EN 1034-22-2005
| 機械安全.紙張制造和整飾機械設計和建造的安全要求.碎木機
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Woodgrinders
|
| BS EN 1034-6-2005
| 機械安全.紙張制造和整飾機械設計和建造的安全要求.砑光機
| Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender
|
| BS EN 1035-1999
| 鞣皮機.移動臺板機.安全要求
| Tannery machines - Moving platen machinery - Safety requirements
|
| BS EN 1095-1998
| 游艇上用的甲板安全帶狀裝置和安全索.安全要求和試驗方法
| Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods
|
| BS EN 1114-2-1998
| 橡膠和塑料機械.擠出機和擠出生產線.模具表面造粒機的安全要求
| Rubber and plastics machines - Extruders and extrusion lines - Safety requirements for die face pelletizers
|
| BS EN 1176-1-1998
| 游樂場器材.一般安全要求和試驗方法
| Playground equipment - General safety requirements and test methods
|
| BS EN 1176-5-1999
| 游樂場器材.圓盤傳送帶的附加特殊安全要求和試驗方法
| Playground equipment - Additional specific safety requirements and test methods for carousels
|
| BS EN 1176-6-1998
| 游樂場器材.搖擺設備的附加特殊安全要求和試驗方法
| Playground equipment - Additional specific safety requirements and test methods for rocking equipment
|
| BS EN 1177-1998
| 沖擊減震游樂場表面修整.安全要求和試驗方法
| Impact absorbing playground surfacing - Safety requirements and test methods
|
| BS EN 12001-2004
| 混凝土和灰漿用傳送機、噴射機和澆筑機.安全要求
| Conveying, spraying and placing machines for concrete and mortar - Safety requirements
|
| BS EN 12012-2-2001
| 橡膠和塑料機.粒度減小機.多芯鉸線的安全要求
| Rubber and plastics machines - Size reduction machines - Safety requirements for strand pelletisers
|
| BS EN 12012-3-2001
| 橡膠和塑料機械.粉碎機.粉碎機的安全要求
| Rubber and plastics machines - Size reduction machines - Safety requirements for shredders
|
| BS EN 12013-2000
| 橡膠和塑料機械.內混式.安全要求
| Rubber and plastics machines - Internal mixers - Safety requirements
|
| BS EN 12077-2-1999
| 起重機安全.衛生和安全要求.限動及指示設備
| Cranes safety - Requirements for health and safety - Limiting and indicating devices
|
| BS EN 12110-2002
| 隧道掘進機.氣閘.安全要求
| Tunnelling machines - Air locks - Safety requirements
|
| BS EN 12111-2002
| 隧道掘進機.巷道掘進機、聯合采礦機和沖擊式挑頂機.安全要求
| Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
|
| BS EN 12128-1998
| 生物技術.研究、開發和分析實驗室.微生物實驗室的抑制等級,風險區,選點,物理安全要求
| Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
|
| BS EN 12162-2001
| 液體泵.安全要求.液壓靜態試驗程序
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing
|
| BS EN 12196-2004
| 體操設備.跳馬和鞍馬.功能和安全要求、試驗方法
| Gymnasium equipment - Horses and bucks - Functional and safety requirements, test methods
|
| BS EN 12197-1997
| 體操設備.單杠.安全要求和試驗方法
| Gymnastic equipment - Horizontal bars - Safety requirements and test methods
|
| BS EN 12203-2003
| 鞋靴、皮革和人造革商品生產機械.鞋和皮革壓具.安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
|
| BS EN 12215-2004
| 涂覆設備.有機液體涂覆材料噴灑室.安全要求
| Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
|
| BS EN 12221-1-2000
| 家用更換部件.安全要求
| Changing units for domestic use - Safety requirements
|
| BS EN 12227-1-1999
| 家用嬰兒圍欄.安全要求
| Playpens for domestic use - Safety requirements
|
| BS EN 12254-1999
| 激光工作場所用屏幕.安全要求和試驗
| Screens for laser working places - Safety requirements and testing
|
| BS EN 12270-1998
| 登山設備.輪擋.安全要求和試驗方法
| Mountaineering equipment - Chocks - Safety requirements and test methods
|
| BS EN 12275-1998
| 登山設備.連接器.安全要求和試驗方法
| Mountaineering equipment - Connectors - Safety requirements and test methods
|
| BS EN 12277-1998
| 登山運動器材.挽具.安全要求和試驗方法
| Mountaineering equipment - Harnesses - Safety requirements and test methods
|
| BS EN 12278-1998
| 登山設備.皮帶輪.安全要求和試驗方法
| Mountaineering equipment - Pulleys - Safety requirements and test methods
|
| BS EN 12301-2000
| 橡膠和塑料機械.砑光機.安全要求
| Rubber and plastics machines - Calenders - Safety requirements
|
| BS EN 12321-2003
| 地下采礦機械.鎧裝輸送機的安全要求規范
| Underground mining machinery - Specification for the safety requirements of armoured face conveyors
|
| BS EN 12336-2005
| 隧道掘進機.盾構機、止推鉆孔機、螺旋鉆探機、襯里安裝設備.安全要求
| Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
|
| BS EN 12346-1999
| 體操器材.球棒,格梯,爬架.安全要求和試驗方法
| Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods
|
| BS EN 12387-2005
| 鞋靴、皮革和人造革商品生產機械.按標準型式設計的鞋修理設備.安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
|
| BS EN 12397-2004
| 載人用索道裝置的安全要求.操作
| Safety requirements for Cableway installations designed to carry persons - Operation
|
| BS EN 12408-2004
| 載人用索道裝置的安全要求.質量控制
| Safety requirements for cableways installations designed to carry person - Quality control
|
| BS EN 12409-1999
| 橡膠和塑料機械.熱成形機.安全要求
| Rubber and plastics machines - Thermoforming machines - Safety requirements
|
| BS EN 12413-1999
| 粘合磨料制品的安全要求
| Safety requirements for bonded abrasive products
|
| BS EN 12432-1998
| 體操器材.平衡木.功能和安全要求.試驗方法
| Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods
|
| BS EN 1247-2004
| 鑄造機械.鑄勺、傾倒設備、離心鑄造機、連續和半連續鑄造機的安全要求
| Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi-continuous casting machines
|
| BS EN 12491-2001
| 滑翔降落設備.緊急降落傘.安全要求和試驗方法
| Paragliding equipment - Emergency parachutes - Safety requirements and test methods
|
| BS EN 12492-2000
| 登山設備.登山頭盔.安全要求和試驗方法
| Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
|
| BS EN 12503-1-2001
| 運動墊.體操運動墊.安全要求
| Sports mats - Gymnastic mats, safety requirements
|
| BS EN 12503-2-2001
| 運動墊.撐桿跳和跳高墊安全要求
| Sports mats - Pole vault and high jump mats, safety requirements
|
| BS EN 12503-3-2001
| 運動墊.柔道墊安全要求
| Sports mats - Judo mats, safety requirements
|
| BS EN 12547-1999
| 離心機.通用安全要求
| Centrifuges - Common safety requirements
|
| BS EN 12586-1999
| 兒童護理物品.安慰奶嘴夾.安全要求和試驗方法
| Child care articles - Soother holder - Safety requirements and test methods
|
| BS EN 12621-2006
| 壓力下覆層材料的供應和循環用機器.安全要求
| Machinery for the supply and circulation of coating materials under pressure - Safety requirements
|
| BS EN 12628-1999
| 潛水裝置附件.組合浮力及救生設備.功能和安全要求及試驗方法
| Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods
|
| BS EN 12653-2000
| 鞋靴,皮革和仿皮革生產機床.釘接機.安全要求
| Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
|
| BS EN 12655-1998
| 體操設備.吊環.功能和安全要求,試驗方法
| Gymnastic equipment - Hanging rings - Functional and safety requirements, test methods
|
| BS EN 12675-2001
| 交通信號控制器.功能安全要求
| Traffic signal controllers - Functional safety requirements
|
| BS EN 1270-2005
| 運動場設備.籃球設備.功能和安全要求、試驗方法
| Playing field equipment — Basketball equipment — Functional and safety requirements, test methods
|
| BS EN 1271-2004
| 運動場設備.排球設備.功能和安全要求及試驗方法
| Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods
|
| BS EN 12753-2005
| 表面處理設備廢氣的熱清潔系統.安全要求
| Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
|
| BS EN 12779-2005
| 木工機械安全.帶固定裝置的碎屑和灰塵排放裝置.安全相關性能和安全要求
| Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements
|
| BS EN 12927-1-2004
| 載人用索道裝置的安全要求.繩索.繩索及其端裝置的選擇標準
| Safety requirements for cableways installation designed to carry persons - Ropes - Selection criteria for ropes and their end fixing
|
| BS EN 12927-2-2004
| 載人用索道裝置的安全要求.繩索.安全因素
| Safety requirements for cableway installations designed to carry persons - Ropes - Safety factors
|
| BS EN 12927-3-2004
| 載人用索道裝置的安全要求.繩索.6股牽引鋼絲繩、輸送繩和牽引繩索的長插接繩法
| Safety requirements for cableways installation designed to carry persons - Ropes - Long splicing of 6 strand hauling, carrying hauling and towing ropes
|
| BS EN 12927-4-2004
| 載人用索道裝置的安全要求.繩索.端裝置
| Safety requirements for cableway installations designed to carry person - Ropes - End fixings
|
| BS EN 12927-5-2004
| 載人用索道裝置的安全要求.繩索.儲存、運輸、安裝和拉緊
| Safety requirements for cableway installations designed to carry person - Ropes - Storage, transportation, installation and tensioning
|
| BS EN 12927-6-2004
| 載人用索道裝置的安全要求.繩索.報廢標準
| Safety requirements for cableway installations designed to carry persons - Ropes - Discard criteria
|
| BS EN 12927-7-2004
| 載人用索道裝置的安全要求.繩索.檢查、修理和維護
| Safety requirments for cableways installations designed to carry persons - Ropes - Inspection, repair and maintenance
|
| BS EN 12927-8-2004
| 載人用索道裝置的安全要求.繩索.磁性繩索試驗(MRT)
| Safety requirements for cableways installation designed to carry persons - Ropes - Magnetic rope testing (MRT)
|
| BS EN 12929-1-2004
| 載人用索道裝置的安全要求.一般要求.所有裝置的要求
| Safety requirements for cableways installation designed to carry persons - General requirements - Requirements for all installations
|
| BS EN 12929-2-2004
| 載人用索道裝置的安全要求.一般要求.不帶重貨運輸車式剎車的雙向雙線架空索道的附加要求
| Safety requirments for cableways installations designed to carry persons - General requirements - Additional reqirments for reversible bicable aerial ropeways without carrier truck brakes
|
| BS EN 12930-2004
| 載人用索道裝置的安全要求.計算
| Safety requirements for cableway installations designed to carry persons - Calculations
|
| BS EN 12981-2005
| 涂層設備.噴涂有機粉末涂層材料的噴涂室.安全要求
| Coating plants - Spray booths for application of organic powder coating material - Safety requirements
|
| BS EN 13019-2001
| 路面清潔機.安全要求
| Machines for road surface cleaning - Safety requirements
|
| BS EN 13020-2005
| 道路表面處理機器.安全要求
| Road surface treatment machines - Safety requirements
|
| BS EN 13021-2003
| 冬季使用機械.安全要求
| Winter service machines - Safety requirements
|
| BS EN 13035-3-2003
| 平板玻璃的制造、處理和加工用機械和設備.安全要求.切割機
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines
|
| BS EN 13035-4-2003
| 平板玻璃的制造、處理和加工用機械和設備.安全要求.傾斜臺
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Tilting tables
|
| BS EN 13042-2-2004
| 空心玻璃生產、處理和加工用機械和設備.安全要求.給料用搬運機械
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Handling machines for feeding
|
| BS EN 13042-5-2003
| 空心玻璃生產、處理和加工用機械和設備.安全要求.壓力機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Presses
|
| BS EN 13049-2003
| 窗.軟物體和重物體沖擊.試驗方法、安全要求和分類
| Windows - Soft and heavy body impact - Test method, safety requirements and classification
|
| BS EN 13089-1999
| 登山設備.攀冰工具.安全要求和試驗方法
| Mountaineering equipment - Ice tools - Safety requirements and test methods
|
| BS EN 13107-2004
| 載人用索道裝置的安全要求.民用工程設施
| Safety requirements for cableway installations designed to carry persons - Civil engineering works
|
| BS EN 13138-1-2004
| 游泳教學用浮力輔助設備.可穿戴的浮力輔助設備的安全要求和試驗方法
| Buoyant aids for swimming instruction - Safety requirements and test methods for buoyant aids to be worn
|
| BS EN 13138-2-2004
| 游泳教學用浮力輔助設備.可握住的浮力輔助設備的安全要求和試驗方法
| Buoyant aids for swimming instruction - Safety requirements and test methods for buoyant aids to be held
|
| BS EN 13138-3-2004
| 教授游泳用浮力輔助設備.可穿戴的游泳椅的安全要求和試驗方法
| Buoyant aids for swimming instruction - Safety requirements and test methods for swim seats to be worn
|
| BS EN 13209-1-2004
| 兒童使用和護理用品.嬰兒運載工具.安全要求和檢驗方法.后向有框架的運載工具
| Child use and care articles - Baby carriers - Safety requirements and test methods - Framed back carriers
|
| BS EN 13209-2-2005
| 兒童使用和護理用品.嬰兒運載工具.安全要求和檢驗方法.軟式運載工具
| Child use and care articles - Baby carriers - Safety requirements and test methods - Soft carrier
|
| BS EN 13210-2004
| 兒童護理用品.兒童安全背帶、學步繩和類似物品.安全要求和試驗方法
| Child care articles - Children's safety harnesses, reins and similar type articles - Safety requirements and test methods
|
| BS EN 13219-2001
| 體操設備.蹦床.功能和安全要求及試驗方法
| Gymnastic equipment - Trampolines - Functional and safety requirements, test methods
|
| BS EN 13223-2004
| 載人用索道裝置的安全要求.驅動設備和其他機械設備
| Safety requirements for cableways installations designed to carry persons - Drive systems and other mechanical equipment
|
| BS EN 13236-2001
| 超級磨料的安全要求
| Safety requirements for superabrasives
|
| BS EN 13243-2004
| 載人用索道裝置的安全要求.驅動系統以外的電氣設備
| Safety requirements for cableway installation designed to carry persons - Electrical equipment other than for drive systems
|
| BS EN 13281-2000
| 內河航行船舶.水道和工作場所安全要求
| Inland navigation vessels - Safety requirements for walkways and working places
|
| BS EN 13355-2005
| 涂覆設備.混合室.安全要求
| Coating plants - Combined booths - Safety requirements
|
| BS EN 13418-2004
| 橡膠和塑料機械.薄膜和薄板的卷切機.安全要求
| Rubber and plastics machines - Winding machines for film or sheet - Safety requirements
|
| BS EN 13451-1-2001
| 游泳池設備.一般安全要求和試驗方法
| Swimming pool equipment - General safety requirements and test methods
|
| BS EN 13451-10-2004
| 游泳池設備.跳水平臺、跳水跳板和相關設備的附加專用安全要求和試驗方法
| Swimming pool equipment - Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
|
| BS EN 13451-11-2004
| 游泳池設備.第11部分:可移動游泳池地板和護岸的附加專用安全要求和試驗方法
| Swimming pool equipment - Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
|
| BS EN 13451-2-2001
| 游泳池設備.梯子,腳踏梯和手拉帶專門安全要求和試驗方法.
| Swimming pool equipment - Additional specific safety requirements and test methods for ladders, stepladders and handle bends
|
| BS EN 13451-3-2001
| 游泳池設備.水處理用游泳池配件專門安全要求和試驗方法.
| Swimming pool equipment - Additional specific safety requirements and test methods for pool fittings for water treatment purposes
|
| BS EN 13451-4-2001
| 游泳池設備.跳臺專門安全要求和試驗方法.
| Swimming pool equipment - Additional specific safety requirements and test methods for starting platforms
|
| BS EN 13451-5-2001
| 游泳池設備.泳道線專門安全要求和試驗方法.
| Swimming pool equipment - Additional specific safety requirements and test methods for lane lines
|
| BS EN 13451-6-2001
| 游泳池設備.回轉板專門安全要求和試驗方法.
| Swimming pool equipment - Additional specific safety requirements and test methods for turning boards
|
| BS EN 13451-7-2001
| 游泳池設備.水球球門專門安全要求和試驗方法
| Swimming pool equipment - Additional specific safety requirements and test methods for water polo goals
|
| BS EN 13451-8-2001
| 游泳池設備.休閑設備要素專門安全要求和試驗方法.
| Swimming pool equipment - Additional specific safety requirements and test methods for leisure water features
|
| BS EN 13457-2004
| 鞋靴、皮革和仿皮貨物的生產機械.片皮機、剖革機、裁切機、擦膠機和干膠機.安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
|
| BS EN 13524-2003
| 公路維護設備.安全要求
| Highway maintenance machines - Safety requirements
|
| BS EN 13617-1-2004
| 加油站.計量泵、分配器和遙控泵送裝置的性能和建造的安全要求
| Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
|
| BS EN 13617-2-2004
| 加油站.計量泵和配油器上安全制動器的建造和性能的安全要求
| Petrol filling stations - Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
|
| BS EN 13617-3-2004
| 加油站.剪切閥的結構和性能的安全要求
| Petrol filling stations - Safety requirements for constuction and performance of shear valves
|
| BS EN 13675-2004
| 機械安全.管道成型和軋制機及其精整作業線設備的安全要求
| Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
|
| BS EN 13743-2002
| 涂敷磨料的安全要求
| Safety requirements for coated abrasives
|
| BS EN 13796-2-2005
| 載人用索道裝置的安全要求.運載裝置.夾緊裝置的防滑試驗
| Safety requirements for cableway installations designed to carry persons - Carriers - Slipping resistance tests for grips
|
| BS EN 13796-3-2005
| 載人用索道裝置的安全要求.運載裝置.疲勞試驗
| Safety requirements for cableway installations designed to carry persons - Carriers - Fatigue tests
|
| BS EN 13843-2003
| 滾軸運動設備.單排輪滑冰鞋.安全要求和試驗方法
| Roller sports equipment - Inline-skates - Safety requirements and test methods
|
| BS EN 13899-2003
| 滾軸運動設備.旱冰鞋.安全要求和試驗方法
| Roller sports equipment - Roller skates - Safety requirements and test methods
|
| BS EN 13951-2003
| 液泵.安全要求.農產食品設備.使用中衛生保證的設計原則
| Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use
|
| BS EN 13977-2005
| 鐵路設施.軌道.建造和維修用便攜式機械和手搖車的安全要求
| Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
|
| BS EN 14036-2003
| 兒童使用及看護用品.嬰兒吊椅.安全要求及試驗方法
| Child use and care articles - Baby bouncers - Safety requirements and test methods
|
| BS EN 14073-2-2004
| 辦公家具.儲存用家具.安全要求
| Office furniture - Storage furniture - Part 2: Safety requirements
|
| BS EN 14344-2004
| 兒童使用和護理用品.自行車用兒童座椅.安全要求和試驗方法
| Child use and care articles - Child seats for cycles - Safety requirements and test methods
|
| BS EN 14372-2004
| 兒童使用和護理用品.刀叉和喂養工具.安全要求和試驗
| Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests
|
| BS EN 14413-1-2004
| 娛樂潛水服務.水肺潛水教員培訓的相關最低安全要求.等級1
| Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Level 1
|
| BS EN 14413-2-2004
| 娛樂潛水服務.水肺潛水教員培訓的相關最低安全要求.等級2
| Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Level 2
|
| BS EN 14434-2005
| 教育部門用寫字板.人類工效學、技術和安全要求及其試驗方法
| Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods
|
| BS EN 14468-1-2005
| 乒乓球.乒乓球臺功能、安全要求和試驗方法
| Table tennis - Table tennis tables, functional and safety requirements, test methods
|
| BS EN 14619-2005
| 滾輪運動設備.腳蹬踏板車.安全要求和試驗方法
| Roller sports equipment - Kick scooters - Safety requirements and test methods
|
| BS EN 1466-2004
| 兒童用品.便攜式帆布床和支架.安全要求和試驗方法
| Child care articles - Carry cots and stands - Safety requirements and test methods
|
| BS EN 14710-1-2005
| 消防泵.無起動注油器的消防離心泵.分類、一般要求和安全要求
| Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Classification, general and safety requirements
|
| BS EN 14710-2-2005
| 消防泵.無起動注油器的消防離心泵.一般要求和安全要求的驗證
| Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Verification of general and safety requirements
|
| BS EN 14749-2006
| 家具和廚房貯藏設備和櫥柜臺面.安全要求和試驗方法
| Domestic and kitchen storage units and worktops - Safety requirements and test methods
|
| BS EN 14764-2005
| 城市和遠足自行車.安全要求和試驗方法
| City and trekking bicycles - Safety requirements and test methods
|
| BS EN 14861-2005
| 林業機械.自行式機械.安全要求
| Forest machinery - Self propelled machinery - Safety requirements
|
| BS EN 1509-2004
| 運動場設備.羽毛球設備.功能和安全要求及試驗方法
| Playing field equipment - Badminton equipment - Functional and safety requirements, test methods
|
| BS EN 1510-2004
| 運動場設備.網球設備.功能和安全要求及試驗方法
| Playing field equipment - Tennis equipment - Functional and safety requirements, test methods
|
| BS EN 1552-2003
| 地下采礦機械.工作面上的移動式采掘機械.截裝機和開溝機系統的安全要求
| Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
|
| BS EN 1570-1999
| 升降臺的安全要求
| Safety requirements for lifting tables
|
| BS EN 1709-2004
| 載人用索道裝置的安全要求.試運行檢查、維修、操作檢查和檢驗
| Safety requirements for cableways for cableway installations designed to carry persons - Precommissioning inspection, maintenance and operational inspection and checks
|
| BS EN 1725-1998
| 家具.床和床墊.安全要求和試驗方法
| Domestic furniture - Beds and mattresses - Safety requirements and test methods
|
| BS EN 1756-2-2004
| 尾部提升機.輪式運載工具上安裝的平臺提升機.安全要求.客用尾部提升機
| Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Tail lifts for passengers
|
| BS EN 1777-2004
| 防火和救援服務用液壓升降平臺.安全要求和試驗
| Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
|
| BS EN 1804-2-2002
| 地礦機械.液壓礦頂支撐物的安全要求.動力裝置支腳和沖壓件
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Power set legs and rams
|
| BS EN 1804-3-2006
| 地礦機械.液壓礦頂支撐物的安全要求.液壓控制系統
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Hydraulic control systems
|
| BS EN 1809-1998
| 潛水附件.浮力補償器.功能和安全要求.試驗方法
| Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods
|
| BS EN 1834-1-2000
| 往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計安全要求.用于可燃?xì)怏w和蒸氣環境的II組發動機.
| Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable gas and vapour atmospheres - Part 1 : Group II engines for use in flammable gas and vapour atmospheres
|
| BS EN 1834-2-2000
| 往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計安全要求.用于地下工作時對沼氣和/或可燃性塵土
| Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group I engines for use in underground workings susceptible to firedamp and/or combustible dust - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
|
| BS EN 1834-3-2000
| 往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計安全要求.用于可燃灰塵環境下的II組發動機.第3部
| Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable dust atmospheres - Part 3 : Group II engines for use in flammabel dust atmospheres
|
| BS EN 1845-1999
| 制靴機械.靴模機.安全要求
| Footwear manufacturing machines - Footwear moulding machines - Safety requirements
|
| BS EN 1864-1997
| 內河航運船舶.輪機房和控制位置.型號和安全要求
| Inland navigation vessels - Wheelhouse and control position - Types, safety requirements
|
| BS EN 1888-2003
| 護理兒童用品.輪式兒童車輛.安全要求和試驗方法
| Child care articles - Wheeled child conveyances - Safety requirements and test methods
|
| BS EN 1907-2005
| 載人纜索裝置的安全要求.術語
| Safety requirements for cableway installations designed to carry persons - Terminology
|
| BS EN 1908-2004
| 載人用索道裝置的安全要求.拉緊設備
| Safety requirements for cableways installations designed to carry person - Tensionong Devices
|
| BS EN 1909-2004
| 載人用索道裝置的安全要求.恢復和撤離
| Safety requirements for cableway installations designed to carry persons - Recovery and evacuation
|
| BS EN 1915-1-2001
| 飛行器地面保障設備.一般要求.基本安全要求
| Aircraft ground support equipment - General requirements - Basic safety requirements
|
| BS EN 1930-2000
| 兒童護理用品.安全護欄.安全要求和試驗方法
| Child care articles - Safety barriers - Safety requirements and test methods
|
| BS EN 1953-1999
| 涂覆材料的霧化和噴霧設備.安全要求
| Atomizing and spraying equipment for coating materials - Safety requirements
|
| BS EN 1987-1-1997
| 電車.特殊安全要求.儲能板
| Electrically propelled road vehicles - Specific requirements for safety - On board energy storage
|
| BS EN 1987-2-1997
| 電車.特殊安全要求.功能安全措施和失效防護
| Electrically propelled road vehicles - Specific requirements for safety - Functional safety means and protection against failures
|
| BS EN 1987-3-1998
| 電車.特殊安全要求.乘客電傷害防護措施
| Electrically propelled road vehicles - Specific requirements for safety - Protection of users against electrical hazards
|
| BS EN 264-1991
| 采用液體燃料的成套燃燒設備用安全斷路裝置的安全要求和試驗規范
| Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels
|
| BS EN 282-1997
| 雪崩警報信報標機.發送/接收系統.安全要求和試驗
| Avalanche beacons - Transmitter/receiver systems - Safety requirements and testing
|
| BS EN 289-2004
| 塑料和橡膠機械.壓力機.安全要求
| Plastics and rubber machines - Presses - Safety requirements
|
| BS EN 352-1-2002
| 護聽器.安全要求和試驗.耳套
| Hearing protectors - Safety requirements and testing - Ear-muffs
|
| BS EN 352-2-2002
| 護聽器.安全要求和試驗.耳塞
| Hearing protectors - Safety requirements and testing - Ear-plugs
|
| BS EN 352-3-2002
| 護聽器.安全要求和試驗.工業安全頭盔的耳套
| Hearing protectors - Safety requirements and testing - Ear-muffs attached to an industrial safety helmet
|
| BS EN 352-4-2001
| 聽力保護器.安全要求和試驗.依據聲強的耳套
| Hearing protectors - Safety requirements and testing - Level-dependent ear-muffs
|
| BS EN 352-5-2002
| 護聽器.安全要求和試驗.有源噪聲降低型耳套
| Hearing protectors - Safety requirements and testing - Active noise reduction ear muffs
|
| BS EN 352-6-2002
| 護聽器.安全要求和試驗.帶音頻輸入的耳機套
| Hearing protectors - Safety requirements and testing - Ear-muffs with electrical audio input
|
| BS EN 352-7-2002
| 聽力保護器.安全要求和試驗.依附電平耳塞
| Hearing protectors - Safety requirements and testing - Level-dependent ear-plugs
|
| BS EN 41003-1999
| 電信網絡連接設備特殊安全要求
| Particular safety requirements for equipment to be connected to telecommunications networks
|
| BS EN 50065-4-2-2002
| 頻率范圍為3kHz至148.5kHz的低壓電氣設備的信號傳輸.低壓去耦濾波器.安全要求
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Low voltage decoupling filters - Safety requirements
|
| BS EN 50065-4-7-2005
| 頻率范圍3KHz至148.5KHz和1.6 MHz至30 MHz的低壓電氣設備的信號傳輸.便攜式低壓退耦過濾器.安全要求
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements
|
| BS EN 50090-2-3-2005
| 家用和建筑物電子系統(HBES).系統綜述.集成于HBES中的產品的一般功能安全要求
| Home and building electronic systems (HBES) - System overview - General functional safety requirements for products intended to be integrated in HBES
|
| BS EN 50165-1997
| 家用和類似用途的非電器用電器設備安全要求
| Electrical equipment of non-electric appliances for household and similar purposes - Safety requirements
|
| BS EN 50272-2-2001
| 二次蓄電池和電池裝置的安全要求.二次蓄電池
| Safety requirements for secondary batteries and battery installations - Stationary batteries
|
| BS EN 50402-2005
| 易燃或有毒氣體或蒸氣或氧氣的探測和測量用電氣設備.混合氣體探測系統的功能安全要求
| Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
|
| BS EN 527-2-2003
| 辦公家具.工作臺和寫字臺.機械安全要求
| Office furniture - Work tables and desks - Mechanical safety requirements
|
| BS EN 564-1997
| 登山設備.輔助繩索.安全要求和試驗方法
| Mountaineering equipment - Accessory cord - Safety requirements and test methods
|
| BS EN 565-1997
| 登山設備.帶子.安全要求和試驗方法
| Mountaineering equipment - Tape - Safety requirements and test methods
|
| BS EN 566-1997
| 登山設備.吊索.安全要求和試驗方法
| Mountaineering equipment - Slings - Safety requirements and test methods
|
| BS EN 567-1997
| 登山設備.繩夾.安全要求和試驗方法
| Mountaineering equipment - Rope clamps - Safety requirements and test methods
|
| BS EN 568-1997
| 登山設備.冰錨.安全要求和試驗方法
| Mountaineering equipment - Ice anchors - Safety requirements and test methods
|
| BS EN 569-1997
| 登山設備.楔.安全要求和試驗方法
| Mountaineering equipment - Pitons - Safety requirements and test methods
|
| BS EN 60065-2002
| 音像設備和類似電器.安全要求
| Audio, video and similar electronic apparatus - Safety requirements
|
| BS EN 60215-1990
| 無線電發射設備的安全要求
| Safety requirements for radio transmitting equipment
|
| BS EN 60252-1-2002
| 交流電動機的電容器.總則.性能、試驗和額定值.安全要求.安裝和操作指南
| A.C. motor capacitors - General - Performance, testing and rating - Safety requirements - Guide for installation and operation
|
| BS EN 60601-2-24-1998
| 醫療電氣設備.特殊安全要求.輸液泵和控制器的特殊安全要求.
| Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of infusion pumps and controllers
|
| BS EN 60601-2-4-2003
| 醫療電氣設備.安全的特殊要求.心臟去纖顫器的特殊安全要求
| Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of cardiac defibrillators
|
| BS EN 60601-2-40-1998
| 醫療電氣設備.特殊安全要求.筋骨電流計和誘發反應設備規范
| Medical electrical equipment - Particular requirements for safety - Specification for electromyographs and evoked response equipment
|
| BS EN 60601-2-43-2001
| 醫用電氣設備.安全性特殊要求.介入過程用X射線設備安全專用要求X射線設備界入過程特殊安全要求.第2-43部分:
| Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of X-ray equipment for interventional procedures - Part 2-43: Particular requirements for the safety of X-ray equipment for interventional procedures
|
| BS EN 60601-2-43-2001
| 醫用電氣設備.安全性特殊要求.介入過程用X射線設備安全專用要求X射線設備界入過程特殊安全要求.第2-43部分:
| Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of X-ray equipment for interventional procedures - Part 2-43: Particular requirements for the safety of X-ray equipment for interventional procedures
|
| BS EN 60601-2-47-2001
| 醫用電氣設備.安全性專門要求.流動心電圖測試系統特定安全要求(包括基本性能)
| Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems
|
| BS EN 60831-1-1998
| 額定電壓小于等于1000V的交流電系統用自動恢復功能型分流電力電容器.總則.性能、試驗及評定.安全要求.安裝
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1kV - General - Performance , testing and rating - Safety requirements - Guide for installation and operation
|
| BS EN 60871-1-1998
| 額定電壓超過1kV的交流電力系統用并聯電容器.第1部分:總則、試驗和額定值.安全要求.安裝和運行指南
| Shunt capacitors for a.c. power systems having a rated voltage above 1 kV - General, testing and rating - Safety requirements - Guide for installation and operation
|
| BS EN 60947-7-3-2002
| 低壓開關設備和控制設備規范.輔助設備.保險絲接線盒的安全要求
| Specification for low-voltage switchgear and controlgear - Ancillary equipment - Safety requirements for fuse terminal blocks
|
| BS EN 60999-2-2003
| 連接器件.銅導線.有螺紋式和無螺紋式夾緊裝置的安全要求.導體截面為35平方毫米至300平方毫米的夾緊裝置的特
| Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
|
| BS EN 61010-2-010-2003
| 測量、控制和實驗室用電氣設備的安全要求.材料加熱用實驗室設備的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material
|
| BS EN 61010-2-032-2003
| 測量、控制和試驗室用電氣設備的安全要求.電氣測量和試驗用手持和手控電流感應器的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
|
| BS EN 61010-2-051-2003
| 測量、控制和實驗室用電氣設備的安全要求.混合和攪拌用實驗室設備的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for mixing and stirring
|
| BS EN 61010-2-061-2003
| 測量、控制和實驗室用電氣設備的安全要求.具有熱原子化和離子化的實驗室原子光譜測定儀的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
|
| BS EN 61010-2-101-2002
| 測量、控制和實驗室用電氣設備的安全要求.實驗室診斷(IVD)醫療設備的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for in vitro diagnostic (IVD) medical equipment
|
| BS EN 61050-1992
| 空載輸出電壓超過1000V的管形放電燈用變壓器規范(一般稱為氖管變壓器).一般要求和安全要求
| Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements
|
| BS EN 61210-1995
| 連接裝置.銅電導體的扁型速接終端的安全要求
| Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
|
| BS EN 61800-5-1-2003
| 可調速的電驅動系統.安全要求.電、熱及能量
| Adjustable speed electrical power drive systems - Safety requirements - Electrical, thermal and energy
|
| BS EN 61810-1-2004
| 機電式初等繼電器.一般和安全要求
| Electromechanical elementary relays - General and safety requirements
|
| BS EN 62040-1-1-2003
| 不間斷電源系統(UPS).操作人員訪問區使用的UPS的一般要求和安全要求
| Uninterruptible power systems (UPS) - General and safety requirements for UPS used in operator access areas
|
| BS EN 62040-1-2-2003
| 不間斷電源系統(UPS).限制訪問區使用的UPS的一般要求和安全要求
| Uninterruptible power systems (UPS) - General and safety requirements for UPS used in restricted access locations
|
| BS EN 62133-2003
| 含堿性或其它非酸性電解液的副電池和蓄電池.便攜式密封副電池和由它們制成的便攜式蓄電池的安全要求
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
|
| BS EN 62310-1-2005
| 靜態傳送系統(STS).一般和安全要求
| Static transfer systems (STS) - General and safety requirements
|
| BS EN 710-1998
| 鑄造用制模、制芯機械、裝置及相關設備的安全要求
| Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
|
| BS EN 746-2-1997
| 工業熱加工設備.第2部分:燃燒和燃料處理系統的安全要求
| Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
|
| BS EN 746-3-1997
| 工業熱加工設備.環境氣體產生和使用的安全要求
| Industrial thermoprocessing equipment - Safety requirements for the generation and use of atmosphere gases
|
| BS EN 747-1-1993
| 家具.家用床具.安全要求
| Furniture - Bunk beds for domestic use - Safety requirements
|
| BS EN 748-2004
| 運動場設備.足球球門.功能和安全要求及試驗方法
| Playing field equipment - Football goals - Functional and safety requirements, test methods
|
| BS EN 749-2004
| 運動場設備.手球球門.功能和安全要求及試驗方法
| Playing field equipment - Handball goals - Functional and safety requirements, test methods
|
| BS EN 750-2004
| 運動場設備.曲棍球球門.功能和安全要求及試驗方法
| Playing field equipment - Hockey goals - Functional and safety requirements, test methods
|
| BS EN 847-3-2004
| 木工工具.安全要求.夾緊裝置
| Tools for woodworking - Safety requirements - Clamping devices
|
| BS EN 869-1998
| 高壓金屬壓模鑄造組件的安全要求
| Safety requirements for high pressure metal diecasting units
|
| BS EN 892-2004
| 登山設備.動力登山繩.安全要求和試驗方法
| Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
|
| BS EN 916-2003
| 體操器材.跳箱.安全要求和試驗方法
| Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety
|
| BS EN 930-1997
| 鞋類、皮革和仿皮革產品生產機械.粗加工、刷洗、上光和整理機械.安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
|
| BS EN 957-10-2005
| 固定的訓練器材.帶固定輪或無活動輪的訓練用自行車的附加特定安全要求和試驗方法
| Stationary training equipment - Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods
|
| BS EN 957-2-2004
| 固定式訓練器材.力量訓練器材的補充特殊安全要求和試驗方法
| Stationary training equipment - Strength training equipment ,additional specific safety requirements and test methods
|
| BS EN 957-5-1997
| 固定的訓練器材.踏板曲柄訓練器材.補充的特定安全要求和試驗方法
| Stationary training equipment - Pedal crank training equipment - Additional specific safety requirements and test methods
|
| BS EN 957-6-2001
| 固定的訓練器材.踏車.補充特殊安全要求和試驗方法
| Stationary training equipment - Treadmills, additional specific safety requirements and test methods
|
| BS EN 957-9-2004
| 固定的訓練器材.橢圓訓練器材.附加的特殊安全要求和試驗方法
| Stationary training equipment - Elliptical trainers, additional specific safety requirements and test methods
|
| BS EN 959-1997
| 登山設備.巖石錨栓.安全要求和試驗方法
| Mountaineering equipment - Rock anchors - Safety requirements and test methods
|
| BS EN ISO 10079-1-2000
| 醫用吸引設備.電驅動吸引設備.安全要求
| Medical suction equipment - Electrically powered suction equipment - Safety requirements
|
| BS EN ISO 10472-1-1998
| 工業洗衣機的安全要求.第1部分:通用要求
| Safety requirements for industrial laundry machinery - Common requirements
|
| BS EN ISO 10472-2-1998
| 工業洗衣機的安全要求.第2部分:洗衣機和洗滌脫水機
| Safety requirements for industrial laundry machinery - Washing machines and washer-extractors
|
| BS EN ISO 10472-3-1998
| 工業洗衣機的安全要求.第3部分：管道式洗滌線及組合機械
| Safety requirements for industrial laundry machinery - Washing tunnel lines including component machines
|
| BS EN ISO 10472-4-1998
| 工業洗衣機的安全要求.第4部分:空氣干燥器
| Safety requirements for industrial laundry machinery - Air dryers
|
| BS EN ISO 10472-5-1998
| 工業洗衣機的安全要求.第5部分:熨燙衣機、進布機和折布機
| Safety requirements for industrial laundry machinery - Flatwork ironers, feeders and folders
|
| BS EN ISO 10472-6-1998
| 工業洗衣機的安全要求.第6部分:熨燙及熔壓機
| Safety requirements for industrial laundry machinery - Ironing and fusing presses
|
| BS EN ISO 10821-2005
| 工業縫紉機械.縫紉機械、設備和系統的安全要求
| Industrial sewing machines - Safety requirements for sewing machines, units and systems
|
| BS EN ISO 11102-1-1997
| 內燃機.手柄起動裝置.安全要求和檢驗
| Reciprocating internal combustion engines - Handle starting equipment - Safety requirements and tests
|
| BS EN ISO 11111-1-2005
| 紡織機械.安全要求.通用要求
| Textile machinery - Safety requirements - Common requirements
|
| BS EN ISO 11111-2-2005
| 紡織機械.安全要求.紡紗準備和紡紗機
| Textile machinery - Safety requirements - Spinning preparatory and spinning machines
|
| BS EN ISO 11111-3-2005
| 紡織機械.安全要求.無紡機械
| Textile machinery - Safety requirements - Nonwoven machinery
|
| BS EN ISO 11111-4-2005
| 紡織機械.安全要求.紗線處理、纜索和繩索生產機器
| Textile machinery - Safety requirements - Yarn processing, cordage and rope manufacturing machinery
|
| BS EN ISO 11111-5-2005
| 紡織機械.安全要求.織造和針織用預梳機
| Textile machinery - Safety requirements - Preparatory machinery to weaving and knitting
|
| BS EN ISO 11111-6-2005
| 紡織機械.安全要求.織物織造機械
| Textile machinery - Safety requirements - Fabric manufacturing machinery
|
| BS EN ISO 11111-7-2005
| 紡織機械.安全要求.染色和精整機
| Textile machinery - Safety requirements - Dyeing and finishing machinery
|
| BS EN ISO 11442-1-1996
| 技術產品文獻.計算機技術信息處理.第1部分:安全要求
| Technical product documentation - Handling of computer-based technical information - Security requirements
|
| BS EN ISO 11553-1-2005
| 機械安全.激光加工機械.一般安全要求
| Safety of machinery - Laser processing machines - General safety requirements
|
| BS EN ISO 11680-1-2001
| 林業機械.動力桿驅動的修枝鋸的安全要求和試驗.帶有整體內燃機的裝置
| Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Units fitted with an integral combustion engine
|
| BS EN ISO 11680-2-2001
| 林業機械.動力桿驅動的修枝鋸的安全要求和試驗.用于背負式電源的裝置
| Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Units for use with a back-pack power source
|
| BS EN ISO 11681-1-2004
| 林業機械.便攜式鏈鋸的安全要求和試驗.林業專用鏈鋸
| Machinery for forestry - Portable chain-saw safety requirements and testing - Chain-saws for forest service
|
| BS EN ISO 14314-2004
| 往復式內燃機.反沖起動設備.一般安全要求
| Reciprocating internal combustion engines - Recoil starting equipment - General safety requirements
|
| BS EN ISO 14620-1-2003
| 航天系統.安全要求.系統安全
| Space systems - Safety requirements - System safety
|
| BS EN ISO 15641-2001
| 高速切削機床用銑刀.安全要求
| Milling cutters for high speed machining - Safety requirements
|
| BS EN ISO 6218-2005
| 內河航行船只.頂推船手控連接裝置.安全要求和主要尺寸
| Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions
|
| BS EN ISO 8230-1998
| 采用全氯乙烯干洗機的安全要求
| Safety requirements for dry-cleaning machines using perchloroethylene
|
| BS EN ISO 8359-1997
| 醫療電氣設備.醫用氧氣濃縮器的安全要求
| Medical electrical equipment - Oxygen concentrators for medical use - Safety requirements
|
| BS IEC 61010-3-010-1999
| 測量、控制和實驗室用電氣設備的安全要求.滿足IEC 61010-2-010：.材料加熱用實驗室設備的特殊要求的合格鑒
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
|
| BS IEC 61010-3-020-1999
| 測量、控制和實驗室用電氣設備的安全要求.滿足IEC 61010-2-020:1992：實驗室離心機的特殊要求的合格鑒定報
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
|
| BS IEC 61010-3-051-1999
| 測量、控制和實驗室用電氣設備的安全要求.IEC 61010-2-051的合格鑒定報告.混合和攪拌用實驗室設備的特殊要
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
|
| BS IEC 61010-3-061-1999
| 測量、控制和實驗室用電氣設備的安全要求.IEC 61010-2-061的合格鑒定報告.帶有熱霧化和電離的實驗室原子分
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
|
| BS IEC 61010-3-1-1997
| 測量、控制和實驗室用電氣設備安全要求.IEC 61010-1的一致性驗證報告
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-1
|
| BS IEC 61010-3-1997
| 測量、控制和實驗室用電氣設備的安全要求.IEC 61010系列的一致性驗證報告的起草協議
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Protocol for the preparation of conformity verification reports for the IEC 61010 series
|
| BS ISO 11850-2003
| 林業機械.自行式機械.安全要求
| Machinery for forestry - Self-propelled machinery - Safety requirements
|
| BS ISO 12648-2006
| 圖形技術.印刷機系統的安全要求
| Graphic technology - Safety requirements for printing press systems
|
| BS ISO 14740-1998
| 林業用機械.灌木切割機、剪草機、桿材切割機及類似設備用背包式電動裝置.安全要求和試驗
| Forestry machinery - Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances - Safety requirements and testing
|
| BS ISO 14865-1998
| 林業用機械.背包式內燃機電源便攜式手持灌木切割機和剪草機.安全要求和試驗
| Machinery for forestry - Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source - Safety requirements and testing
|
| BS ISO 15190-2003
| 醫學實驗室.安全要求
| Medical laboratories - Requirements for safety
|
| BS ISO 15817-2005
| 土方機械.遠程駕駛員控制裝置的安全要求
| Earth-moving machinery - Safety requirements for remote operator control
|
| BS ISO 16156-2004
| 機床安全.工件夾盤的設計和建造的安全要求
| Machine-tools safety - Safety requirements for the design and construction of work holding chucks
|
| BS ISO 20957-1-2006
| 固定式培訓器材.一般安全要求和試驗方法
| Stationary training equipment - General safety requirements and test methods
|
| BS ISO 20957-2-2006
| 固定式培訓器材.力量培訓器材.附加特殊安全要求和試驗方法
| Stationary training equipment - Strength training equipment - Additional specific safety requirements and test methods
|
| BS ISO 9462-1994
| 高山雪撬緊固繃帶.安全要求和試驗方法
| Alpine ski-bindings - Safety requirements and test methods
|
| CWA 14174-3-2001
| 金融交易IC讀卡機.安全要求
| Financial transactional IC card reader (FINREAD). Security requirements
|
| DD ENV 12520-2000
| 家用家具.座椅.機械和結構安全要求
| Domestic furniture. Seating. Mechanical and structural safety requirements
|
| DD ENV 12521-2000
| 家用家具.桌子.機械和結構安全要求
| Domestic furniture. Tables. Mechanical and structural safety requirements
|
| DD ENV 1729-2-2001
| 家具.教育機構用的椅子和桌子.安全要求和試驗方法
| Furniture. Chairs and tables for educational institutions. Safety requirements and test methods
|
| DD ENV 581-2-2000
| 戶外家具.野營、家用和訂做的座椅和桌子.座椅的機械安全要求和試驗方法
| Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for seating
|
| PD 60065-2001
| BS EN 60065:1998的說明.音頻、視頻以及類似電子裝置.安全要求
| Interpretation sheets for BS EN 60065:1998. Audio, video and similar electronic apparatus. Safety requirements
|
| PD IEC TR 61010-3-032-2002
| 測量、控制和實驗室用電氣設備的安全要求.IEC 61010-2-032:1994<電氣測量和試驗用手持式電流夾的特殊要求>
| Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-032:1994. Particular requirements for hand-held current clamps for electrical measurement and test
|
| PD IEC TR 61010-3-041-2002
| 測量、控制和實驗室用電氣設備的安全要求.IEC 61010-2-041:1995的合格評定報告.醫療材料處理和實驗室試驗用
| Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-041:1995. Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
|
| PD IEC TR 61010-3-042-2002
| 測量、控制和實驗室用電氣設備的安全要求.IEC 61010-2-042:1997.醫療材料處理和實驗室處理用蒸壓器和消毒器
| Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-042:1997, particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes
|
| PD IEC TR 61010-3-043-2002
| 測量、控制和實驗室用電氣設備的安全要求.IEC 61010-2-043:1997<醫療材料處理和實驗室試驗用熱空氣或熱惰性
| Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-043:1997. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for treatment of medical materials and for laboratory processes
|
| 編號 | 中文名稱 | 英文名稱 |
|---|