| 編號 | 中文名稱 | 英文名稱 |
|---|
| CR 14302-2002
| 健康信息學 間歇連接設備的安全要求框架
| Health informatics - Framework for security requirements for intermittently connected devices
|
| CWA 14167-1-2003
| 用于電子簽名的可靠系統管理認證的安全要求 第1部分：系統安全要求
| Security requirements for trustworthy systems managing certificates for electronic signatures - Part 1: System security requirements
|
| CWA 14167-2-2002
| 用于電子簽名的可靠系統管理認證的安全要求 第2部分：CSP簽字操作密碼模塊 防護框架（MCSO-PP）
| Security requirements for Trustworthy Systems Managing Certificates for Electronic Signatures - Part 2: Cryptographic Module for CSP Signing Operations; Protection Profile (MCSO-PP)
|
| CWA 14170-2001
| 簽名生成應用軟件的安全要求
| Security requirements for signature creation applications
|
| CWA 14174-3-2001
| 金融交易IC卡讀卡機（FINREAD） 第3部分：安全要求
| Financial transactional IC card reader (FINREAD) - Part 3: Security requirements
|
| CWA 14842-3-2003
| 電子商務 商店描述和處理 第3部分：ICT安全要求
| Electronic commerce - Shop presentation and transactions - Part 3: ICT security requirements
|
| EN 1010-3-2002
| 機械安全 印刷和紙張轉換機的設計和結構的安全要求 第3部分：切割機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
|
| EN 1012-1-1996
| 壓縮機和真空泵 安全要求 第1部分：壓縮機
| Compressors and vacuum pumps - Safety requirements - Part 1: Compressors
|
| EN 1012-2-1996
| 壓縮機和真空泵 安全要求 第2部分：真空泵
| Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
|
| EN 1023-2-2000
| 辦公家具 屏風 第2部分：機械安全要求
| Office furniture - Screens - Part 2: Mechanical safety requirements
|
| EN 1028-1-2002
| 消防泵 帶起動器的消防離心泵 第1部分：分類 一般和安全要求
| Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification; General and safety requirements
|
| EN 1028-2-2002
| 消防泵 帶起動器的消防離心泵 第2部分：一般和安全要求的驗證
| Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
|
| EN 1034-1-2000
| 機械安全 造紙機械和精整機的設計和建造安全要求 第1部分：通用要求
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
|
| EN 1034-3-1999
| 機械安全 造紙機械和精整機的設計和建造安全要求 第3部分：卷紙機、縱切機和絞合機
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines
|
| EN 1035-1998
| 鞣皮機 移動平整機 安全要求
| Tannery machines - Moving platen machinery - Safety requirements
|
| EN 1069-1-2000
| 高度在2m以上的水滑道 第1部分：安全要求和試驗方法
| Water slides of 2 m height and more - Part 1: Safety requirements and test methods
|
| EN 1083-2-1997
| 電刷 第2部分：安全要求
| Power-driven brushes- Part 2: Safety requirements
|
| EN 1095-1998
| 游艇上用的甲板安全帶狀裝置和安全索 安全要求和試驗方法
| Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods
|
| EN 1114-1-1996
| 橡膠和塑料機械 擠壓機和擠壓工作線 第1部分：擠壓的安全要求
| Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
|
| EN 1114-2-1998
| 橡膠和塑料機械 擠壓機和擠壓工作線 第2部分：沖模表面造粒機的安全要求
| Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
|
| EN 1114-3-2001
| 橡膠和塑料機械 擠壓機和擠壓工作線 第3部分：壓出機的安全要求
| Rubber and plastics machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
|
| EN 1129-1-1995
| 家具 折疊床 安全要求和測試 第1部分：安全要求
| Furniture - Foldaway beds - Safety requirements and testing - Part 1: Safety requirements
|
| EN 1129-2-1995
| 家具 折疊床 安全要求和測試 第2部分：試驗方法
| Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods
|
| EN 1130-1-1996
| 家具 家用嬰兒床和搖籃 第1部分：安全要求
| Furniture - Cribs and cradles for domestic use - Part 1: Safety requirements
|
| EN 1153-1995+AC-1996
| 廚房家具 固定和活動廚柜和工作頂柜的安全要求和試驗方法
| Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops / Note: To be replaced by prEN 14749 (2003-08).
|
| EN 1176-1-1998+A1-2002 +AC-1998+A2-2002
| 運動場設備 第1部分：一般安全要求和試驗方法
| Playground equipment - Part 1: General safety requirements and test methods
|
| EN 1176-2-1998+A1-2003
| 運動場設備 第2部分：秋千試驗方法和附加特殊安全要求
| Playground equipment - Part 2: Additional specific safety requirements and test methods for swings
|
| EN 1176-3-1998+A1-2003
| 運動場設備 第3部分：滑梯試驗方法和附加特殊安全要求
| Playground equipment - Part 3: Additional specific safety requirements and test methods for slides
|
| EN 1176-4-1998+A1-2003
| 運動場設備 第4部分：跑道試驗方法和附加特殊安全要求
| Playground equipment - Part 4: Additional specific safety requirements and test methods for runways
|
| EN 1176-5-1998+A1-2002 +AC-1998+A2-2003
| 運動場設備 第5部分：圓盤傳送帶試驗方法和附加特殊安全要求
| Playground equipment - Part 5: Additional specific safety requirements and test methods for carousels
|
| EN 1176-6-1998+A1-2002
| 運動場設備 第6部分：擺動設備試驗方法和附加特殊安全要求
| Playground equipment - Part 6: Additional specific safety requirements and test methods for rocking equipment
|
| EN 1177-1997+A1-2001
| 沖擊減震運動場表面修整 安全要求和試驗方法
| Impact absorbing playground surfacing - Safety requirements and test methods
|
| EN 12012-1-2000
| 橡膠和塑料加工機械 粉碎機 第1部分：對刀片式制粒機的安全要求
| Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators
|
| EN 12012-2-2001
| 橡膠和塑料加工機械 粉碎機 第2部分：帶式成球機的安全要求
| Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
|
| EN 12012-3-2001
| 橡膠和塑料加工機械 粉碎機 第3部分：對撕碎機的安全要求
| Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders
|
| EN 12013-2000
| 橡膠和塑料加工機械 內部混合機 安全要求
| Rubber and plastics machines - Internal mixers - Safety requirements
|
| EN 12077-2-1998
| 起重機安全 衛生和安全要求 第2部分：限制和指示裝置
| Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
|
| EN 12110-2002
| 隧道開鑿機械 氣塞 安全要求
| Tunnelling machines - Air locks - Safety requirements
|
| EN 12111-2002
| 隧道開鑿機械 道路鐓鍛機、連續開采機和掘進機 安全要求
| Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
|
| EN 12128-1998
| 生物學 研究、開發和分析用實驗室 微生物實驗室的遏制水平、危險區域、地點和物理安全要求
| Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
|
| EN 12162-2001
| 液體泵 安全要求 流體靜壓試驗程序
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing
|
| EN 12196-2003
| 體操設備 跳馬和鞍馬 功能和安全要求 試驗方法
| Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods
|
| EN 12197-1997
| 體操設備 單杠 安全要求和試驗方法
| Gymnastic equipment - Horizontal bars - Safety requirements and test methods
|
| EN 12203-2003
| 鞋襪、皮革和人造革制品加工機械 鞋和皮革模壓機 安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
|
| EN 12221-1-1999
| 家用更換部件 第1部分：安全要求
| Changing units for domestic use - Part 1: Safety requirements
|
| EN 12227-1-1999
| 家用嬰兒圍欄 第1部分：安全要求
| Playpens for domestic use - Part 1: Safety requirements
|
| EN 12254-1998+A1-2002
| 激光工作場所屏蔽 安全要求和試驗
| Screens for laser working places - Safety requirements and testing
|
| EN 12270-1998
| 登山設備 楔子 安全要求和試驗方法
| Mountaineering equipment - Chocks - Safety requirements and test methods
|
| EN 12275-1998
| 登山設備 連接器 安全要求和試驗方法
| Mountaineering equipment - Connectors - Safety requirements and test methods
|
| EN 12276-1998+AC-2000
| 登山設備 摩擦固定器 安全要求和試驗方法
| Mountaineering equipment - Frictional anchors - Safety requirements and test methods
|
| EN 12277-1998
| 登山設備 吊帶 安全要求和試驗方法
| Mountaineering equipment - Harnesses - Safety requirements and test methods
|
| EN 12278-1998
| 登山設備 滑輪 安全要求和試驗方法
| Mountaineering equipment - Pulleys - Safety requirements and test methods
|
| EN 12301-2000
| 橡膠和塑料機械 砑光機 安全要求
| Rubber and plastics machines - Calenders - Safety requirements
|
| EN 12321-2003
| 地下采礦機械 鎧裝刮板運輸機安全要求規范
| Underground mining machinery - Specification for the safety requirements of armoured scraper conveyors
|
| EN 12346-1998
| 體操器械 肋木、格梯和爬架 安全要求和試驗方法
| Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods
|
| EN 12409-1999
| 橡膠和塑料機械 熱成形機 安全要求
| Rubber and plastics machines - Thermoforming machines - Safety requirements
|
| EN 12413-1999
| 粘合磨料制品的安全要求
| Safety requirements for bonded abrasive products
|
| EN 12432-1998
| 體操器械 平衡木 功能和安全要求、試驗方法
| Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods
|
| EN 1248-2001
| 鑄造機械 噴砂設備的安全要求
| Foundry machinery - Safety requirements for abrasive blasting equipment
|
| EN 12491-2001
| 滑翔傘設備 緊急時用降落傘 安全要求和試驗方法
| Paragliding equipment - Emergency parachutes - Safety requirements and test methods
|
| EN 12492-2000+A1-2002
| 登山設備 登山者頭盔 安全要求和試驗方法
| Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
|
| EN 12503-1-2001
| 運動墊 第１部分：體操墊 安全要求
| Sports mats - Part 1: Gymnastic mats, safety requirements
|
| EN 12503-2-2001
| 運動墊 第２部分：撐桿跳高和跳高墊 安全要求
| Sports mats - Part 2: Pole vault and high jump mats, safety requirements
|
| EN 12503-3-2001
| 運動墊 第３部分：柔道墊 安全要求
| Sports mats - Part 3: Judo mats, safety requirements
|
| EN 12514-1-2000
| 燃油咀爐供油系統用的裝置 第1部分：安全要求和試驗 零部件、輸油泵、控制和安全裝置、油罐
| Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks
|
| EN 12514-2-2000
| 燃油爐供油系統用的裝置 第２部分：安全要求和試驗 零部件、閥門、管道、濾油器、油氣分離器、油量指示表
| Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
|
| EN 12547-1999
| 離心機 通用安全要求
| Centrifuges - Common safety requirements
|
| EN 12586-1999
| 兒童用品 橡皮奶頭嘴夾 安全要求和試驗方法
| Child care articles - Soother holder - Safety requirements and test methods
|
| EN 12626-1997
| 機械安全 激光加工機械 安全要求
| Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)
|
| EN 12628-1999+AC-2000
| 潛水輔助設備 組合式浮力和救護設備 功能和安全要求、試驗方法
| Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods
|
| EN 1263-1-2002
| 安全網 第1部分：安全要求 試驗方法
| Safety nets - Part 1: Safety requirements, test methods
|
| EN 1263-2-2002
| 安全網 第2部分：定位區域的安全要求
| Safety nets - Part 2: Safety requirements for the positioning limits
|
| EN 12653-1999
| 鞋類 皮革和人造革加工機械 釘釘機 安全要求
| Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
|
| EN 12653/prA1-2001
| 鞋類 皮革和人造革加工機械 釘釘機 安全要求 修改Ａ１
| Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements; Amendment A1
|
| EN 12655-1998
| 體操設備 吊環 功能和安全要求、試驗方法
| Gymnastic equipment - Hanging rings - Functional and safety requirements, test methods
|
| EN 12675-2000
| 交通信號控制器 功能安全要求
| Traffic signal controllers - Functional safety requirements
|
| EN 1270-1998+A1-2000
| 運動場設備 籃球設備 功能和安全要求 試驗方法
| Playing field equipment - Basketball equipment - Functional and safety requirements, test methods
|
| EN 1271-1998+A1-2000
| 運動場設備 排球設備 功能和安全要求 試驗方法
| Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods
|
| EN 1272-1998
| 兒童保育產品 連椅桌 安全要求和試驗方法
| Child care articles - Table mounted chairs - Safety requirements and test methods
|
| EN 1273-2001
| 兒童保育產品 嬰兒助行架 安全要求和試驗方法
| Child care articles - Baby walking frames - Safety requirements and test methods
|
| EN 12882-2001
| 常用傳輸帶 電氣和可燃性安全要求
| Conveyor belts for general purpose use - Electrical and flammability safety requirements
|
| EN 13019-2001
| 路面清潔機械 安全要求
| Machines for road surface cleaning - Safety requirements
|
| EN 13021-2003
| 冬季服務機械 安全要求
| Winter service machines - Safety requirements
|
| EN 13035-3-2003
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第3部分：裁剪機
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
|
| EN 13035-4-2003
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第4部分：傾斜臺
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
|
| EN 13042-5-2003
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第5部分：沖壓機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses
|
| EN 13049-2003
| 窗 軟物和重物撞擊 試驗方法、安全要求和分類
| Windows - Soft and heavy body impact - Test method, safety requirements and classification
|
| EN 13089-1999
| 登山設備 攀冰工具 安全要求和試驗方法
| Mountaineering equipment - Ice-tools - Safety requirements and test methods
|
| EN 13112-2002
| 制革機械 分離機和帶刀剪切機 安全要求
| Tannery machines - Splitting and bandknife shearing machines - Safety requirements
|
| EN 13113-2002
| 制革機械 滾筒涂敷機 安全要求
| Tannery machines - Roller coating machines - Safety requirements
|
| EN 13114-2002
| 制革機械 旋轉工藝容器 安全要求
| Tannery machines - Rotating process vessels - Safety requirements
|
| EN 13138-1-2003
| 游泳訓練用漂浮救生設備 第1部分：穿著漂浮救生設備的 安全要求和試驗方法
| Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
|
| EN 13138-2-2002
| 游泳訓練用漂浮救生設備 第2部分：手持漂浮救生設備的 安全要求和試驗方法
| Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for bouyant aids to be held
|
| EN 13138-3-2003
| 游泳訓練用漂浮救生設備 第3部分：穿著漂浮救生設備的 浮椅 安全要求和試驗方法
| Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worm
|
| EN 13150-2001
| 實驗室工作臺 尺寸、安全要求和試驗方法
| Workbenches for laboratories - Dimensions, safety requirements and test methods
|
| EN 13219-2001
| 體操設備 蹦床 功能和安全要求 試驗方法
| Gymnastic equipment - Trampolines - Functional and safety requirements, test methods
|
| EN 13236-2001
| 超級磨料的安全要求
| Safety requirements for superabrasives
|
| EN 13281-2000
| 內河航行船舶 人行道和工作區的安全要求
| Inland navigation vessels - Safety requirements for walkways and working places
|
| EN 13319-2000
| 潛水附件 深度計和深度、時間組合測量設備 功能和安全要求、試驗方法
| Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods
|
| EN 1335-2-2000
| 辦公設備 辦公椅 第2部分：安全要求
| Office furniture - Office work chair - Part 2: Safety requirements
|
| EN 13443-1-2002
| 建筑物內水調節設備 機械過濾器 第1部分：顆粒級80μm-150μm 性能和安全要求
| Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80μm to 150μm; Requirements for performances, safety and testing
|
| EN 13451-1-2001
| 泳池設備 第1部分：一般安全要求和試驗方法
| Swimming pool equipment - Part 1: General safety requirements and test methods
|
| EN 13451-2-2001+AC-2003
| 泳池設備 第2部分：階梯、活梯和手柄彎頭的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends
|
| EN 13451-3-2001
| 泳池設備 第3部分：水處理用泳池配件的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for pool fittings for water treatment purposes
|
| EN 13451-4-2001
| 泳池設備 第4部分：起跳臺的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
|
| EN 13451-5-2001
| 泳池設備 第5部分：泳道的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines
|
| EN 13451-6-2001
| 泳池設備 第6部分：轉板的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards
|
| EN 13451-7-2001
| 泳池設備 第7部分：水球球門的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals
|
| EN 13451-8-2001
| 泳池設備 第8部分：備用水部件的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features
|
| EN 13524-2003
| 公路養護機械 安全要求
| Highway maintenance machines - Safety requirements
|
| EN 13613-2001
| 滾軸運動器械 滑板 安全要求和試驗方法
| Roller sports equipment - Skateboards - Safety requirements and test methods
|
| EN 13711-2002
| 內河航運船舶 船舶作業用絞盤 安全要求
| Inland navigation vessels - Winches for ship operation - Safety requirements
|
| EN 13743-2001
| 砂紙安全要求
| Safety requirements for coated abrasives
|
| EN 13843-2003
| 滾軸運動器材 直列式溜冰鞋 安全要求和試驗方法
| Roller sports equipment - Inline-skates - Safety requirements and test methods
|
| EN 13869-2002
| 打火機 兒童禁用的打火機 安全要求和試驗方法
| Lighters - Child-resistance for lighters - Safety requirements and test methods
|
| EN 13899-2003
| 滾軸運動器材 滾軸滑冰鞋 安全要求和試驗方法
| Roller sports equipment - Roller skates - Safety requirements and test methods
|
| EN 13951-2003
| 液泵 安全要求 糧食加工設備 保證使用中的衛生保健設計規程
| Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
|
| EN 1400-1-2002
| 兒童用品和保育品 嬰兒和兒童用橡皮奶頭 第1部分：一般安全要求及產品信息
| Child use and care articles - Soothers for babies and young children - Part 1: General safety requirements and product information
|
| EN 14036-2003
| 嬰兒用護理品 嬰兒蹦床 安全要求和試驗方法
| Child use and care articles - Baby bouncers - Safety requirements and test methods
|
| EN 14059-2002
| 裝飾油燈 安全要求和試驗方法
| Decorative oil lamps - Safety requirements and test methods
|
| EN 1417-1996
| 橡膠和塑料加工機器 雙輥式破碎機 安全要求
| Rubber and plastics machines - Two roll mills - Safety requirements
|
| EN 1466-1998+AC-1998
| 兒童保育品 便攜式帆布床和支撐物 安全要求和試驗方法
| Child care articles - Carry cots and stands - Safety requirements and test methods / Note: To be replaced by prEN 1466 (2003-06).
|
| EN 1501-1-1998
| 垃圾車及其相關提升設備 一般要求和安全要求 第1部分：后部裝載的垃圾車
| Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles
|
| EN 1509-1996
| 運動場設備 羽毛球設備 功能和安全要求 試驗方法
| Playing field equipment - Badminton equipment - Functional and safety requirements, test methods
|
| EN 1510-1996
| 運動場設備 網球設備 功能和安全要求 試驗方法
| Playing field equipment - Tennis equipment - Functional and safety requirements, test methods
|
| EN 1539-2000
| 釋放可燃物質量 烘干機和烤箱 安全要求
| Dryers and ovens, in which flammable substances are released - Safety requirements
|
| EN 1550-1997
| 機床安全 操作夾具的設計和構造的安全要求
| Machine-tools safety - Safety requirements for the design and construction of work holding chucks
|
| EN 1552-2003
| 地下采礦機械 采掘面上移動采掘機器 安全要求 開辟采掘面機械和刨煤機系統
| Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
|
| EN 1553-1999
| 農業機械 自行式、懸掛式、半懸掛式和牽引式機械 通用安全要求
| Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements
|
| EN 1570-1998
| 升降臺的安全要求
| Safety requirements for lifting tables
|
| EN 1612-1-1997
| 橡膠和塑料機械 反應模塑機械 第1部分：測量和混合裝置的安全要求
| Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units
|
| EN 1612-2-2000
| 橡膠和塑料機械 反應模塑機械 第2部分：反應模壓車間的安全要求
| Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
|
| EN 1651-1999
| 滑翔設備 背帶 安全要求和強度試驗
| Paragliding equipment - Harnesses - Safety requirements and strength tests
|
| EN 1725-1998
| 家用家具 床和床墊 安全要求和試驗方法
| Domestic furniture - Beds and mattresses - Safety requirements and test methods
|
| EN 1727-1998
| 家用家具 儲物家具 安全要求和試驗方法
| Domestic furniture - Storage furniture - Safety requirements and test methods
|
| EN 1756-1-2001
| 后置升降裝置 安裝在用輪子行駛的車輛上的平臺式升降裝置 安全要求 第1部分：貨物用后置升降裝置
| Tail lifts - Platform lifts for mounting on wheeled vehicles; Safety requirements - Part 1: Tail lifts for goods
|
| EN 1804-1-2001
| 地下采礦機械 水壓坑道頂棚支架的安全要求 第1部分：支撐單位和一般要求
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
|
| EN 1804-2-2001
| 地下采礦機械 水壓坑道頂棚支架的安全要求 第2部分：動力調整支架和活塞
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
|
| EN 1808-1999
| 懸浮通道設備的安全要求 設計計算 穩定性準則 結構試驗
| Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests
|
| EN 1809-1997
| 潛水附件 浮力補償器 功能和安全要求 試驗方法
| Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods
|
| EN 1834-1-2000
| 往復式內燃發動機 用在潛在爆炸環境下發動機設計結構和安全要求 第1部分：用在可燃?xì)怏w和蒸氣環境的II組
| Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
|
| EN 1834-2-2000
| 往復式內燃發動機 用在潛在爆炸環境下發動機設計結構和安全要求 第2部分：對沼氣和/或可燃性塵土敏感地下
| Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
|
| EN 1834-3-2000
| 往復式內燃發動機 用在潛在爆炸環境下發動機設計結構和安全要求 第3部分：用在可燃灰塵環境下的II組發動
| Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
|
| EN 1845-1998
| 鞋類制造機械 鞋模機 安全要求
| Footwear manufacturing machines - Footwear moulding machines - Safety requirements
|
| EN 1864-1997
| 內河航運輸船舶 舵手室和控制位置 型號和安全要求
| Inland navigation vessels - Wheelhouse and control position - Types, safety requirements
|
| EN 1888-2003
| 兒童保育品 輪式童車 安全要求和試驗方法
| Child care articles - Wheeled child conveyances - Safety requirements and test methods
|
| EN 1915-1-2001
| 航行器的地面支撐設備 一般要求 第1部分：基本安全要求
| Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
|
| EN 1930-2000
| 兒童保育品 安全障礙 安全要求和試驗方法
| Child care articles - Safety barriers - Safety requirements and test methods
|
| EN 1953-1998
| 涂覆材料的霧化和噴涂設備 安全要求
| Atomising and spraying equipment for coating materials - Safety requirements
|
| EN 201-1997+A1-2000
| 橡膠和塑料機械 注模機 安全要求
| Rubber and plastics machines - Injection moulding machines - Safety requirements
|
| EN 203-1-1992+A1-1995+A2-1999
| 氣體加熱供膳設備 第1部分：安全要求
| Gas heated catering equipment; part 1: safety requirements
|
| EN 264-1991
| 采用液體燃料的燃燒設備用安全關閉裝置 安全要求和測試
| Safety shut-off devices for combustion plants using liquid fuels; safety requirements and testing
|
| EN 289-1993
| 橡膠和塑料機械 壓制和傳遞模制壓力機 設計的安全要求
| Rubber and plastics machinery; compression and transfer moulding presses; safety requirements for the design
|
| EN 352-4-2001
| 聽力保護器 安全要求和測試 第4部分：電平依賴的耳套
| Hearing protectors - Safety requirements and testing - Part 4: Level -dependent ear-muffs
|
| EN 352-5-2002
| 聽力保護器 安全要求和測試 第5部分：主動噪聲降低耳套
| Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
|
| EN 352-6-2002
| 聽力保護器 安全要求和測試 第6部分：帶電的音頻輸入耳套
| Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input
|
| EN 352-7-2002
| 聽力保護器 安全要求和測試 第7部分：與水平相關的耳塞
| Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs
|
| EN 41003-1998
| 電信網絡連接設備的特殊安全要求
| Particular safety requirements for equipment to be connected to telecommunication networks
|
| EN 50063-1989
| 電阻焊和相關工藝用設備的制造和安裝的安全要求
| Safety requirements for the construction and the installation of equipment for resistance welding and allied processes
|
| EN 50065-4-2-2001+A1-2003
| 頻率范圍為3kHz-148.5KHZ的低壓電氣設備的信號裝置 第4-2部分：低壓去耦濾波器 安全要求
| Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-2: Low-voltage decoupling filters; Safety requirements
|
| EN 50083-1-1993+A1-1997+A2-1997
| 電視和聲音信號及交互式服務用電纜網絡 第1部分：安全要求
| Cable networks for television signals, sound signals and interactive services - Part 1: Safety requirements
|
| EN 50165-1997+A1-2001
| 家用和類似用途的非電子器具用電子設備的安全要求
| Electrical equipment of non-electric appliances for household and similar purposes - Safety requirements
|
| EN 50272-2-2001
| 對次級蓄電池和安裝蓄電池的安全要求 第2部分：固定蓄電池
| Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
|
| EN 50272-3-2002
| 對次級蓄電池和安裝蓄電池的安全要求 第3部分：牽引蓄電池
| Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries
|
| EN 527-2-2002
| 辦公家具 工作臺和辦公桌 第2部分：機械安全要求
| Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
|
| EN 536-1999
| 筑路機械 瀝青攪拌設備 安全要求
| Road construction machines - Asphalt mixing plants - Safety requirements
|
| EN 564-1997
| 登山設備 輔助繩索 安全要求和試驗方法
| Mountaineering equipment - Accessory cord - Safety requirements and test methods
|
| EN 565-1997+AC-1997
| 登山設備 帶子 安全要求和試驗方法
| Mountaineering equipment - Tape - Safety requirements and test methods
|
| EN 566-1997
| 登山設備 吊索 安全要求和試驗方法
| Mountaineering equipment - Slings - Safety requirements and test methods
|
| EN 567-1997
| 登山設備 繩夾 安全要求和試驗方法
| Mountaineering equipment - Rope clamps - Safety requirements and test methods
|
| EN 568-1997
| 登山設備 冰錨 安全要求和試驗方法
| Mountaineering equipment - Ice anchors - Safety requirements and test methods
|
| EN 569-1997
| 登山設備 巖釘 安全要求和試驗方法
| Mountaineering equipment - Pitons - Safety requirements and test methods
|
| EN 581-1-1997
| 戶外家具 野營、家用和訂做的座椅和桌子 第1部分：一般安全要求
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements
|
| EN 581-3-1999
| 戶外家具 野營、家用和訂做的座椅和桌子 第3部分：桌子的機械安全要求和試驗方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables
|
| EN 60065-2002
| 音頻、視頻及類似電子設備 安全要求
| Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:2001, modified) / Note: Endorsement notice
|
| EN 60143-1-1993
| 電力系統用串聯電容器 第1部分：總則 性能、試驗及定額 安全要求 安裝導則
| Series capacitors for power systems - Part 1: General; Performance, testing and ratin; Safety requirements; Guide for installation
|
| EN 60215-1989
| 無線電發射設備的安全要求
| Safety requirements for radio transmitting equipment (IEC 60215:1987)
|
| EN 60252-1-2001
| 交流電動機電容器 第1部分：總則 性能、試驗和定額 安全要求 安裝和運行指南
| A.C. motor capacitors - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation (IEC 60252-1:2001)
|
| EN 60491-1995
| 攝影用電子閃光裝置的安全要求
| Safety requirements for electronic flash apparatus for photographic purposes (IEC 60491:1984, modified)
|
| EN 60598-2-19-1989+A2-1998
| 燈具 第2部分：特殊要求 第19節：通風式燈具（安全要求）
| Luminaires; part 2: particular requirements; section 19: air-handling luminaires (safety requirements) (IEC 60598-2-19:1981 + AMD 1:1987, modified)
|
| EN 60601-1-1-2001
| 醫用電氣設備 第1－1部分：安全通用要求 并列標準：醫用電氣系統的安全要求
| Medical electrical equipment - Part 1-1: General requirements for safety; Collateral standard: Safety requirements for medical electrical systems (IEC 60601-1-1:2000)
|
| EN 60601-2-10-2000+A1-2001
| 醫用電器設備 第2－10部分：神經和肌肉刺激器安全專用要求
| Medical electrical equipment - Part 2-10: Particular requirements for the safety of nerve and muscle stimulators (IEC 60601-2-10:1987)
|
| EN 60601-2-11-1997
| 醫療電氣設備 第2-11部分：γ射束治療設備安全專用要求
| Medical electrical equipment - Part 2-11: Particular requirements for the safety of gamma beam therapy equipment (IEC 60601-2-11:1997)
|
| EN 60601-2-17-1996+A1-1996
| 醫療電氣設備 第2-17部分:遙控自動驅動式γ射線后裝設備安全專用要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment (IEC 60601-2-17:1989)
|
| EN 60601-2-18-1996+A1-2000
| 醫療電氣設備 第2－18部分：內窺鏡設備安全專用要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopic equipment (IEC 60601-2-18:1996)
|
| EN 60601-2-19-1996+A1-1996
| 醫療電氣設備 第2－19部分：嬰兒培養箱安全專用要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of baby incubators (IEC 60601-2-19:1990)
|
| EN 60601-2-2-2000
| 醫療電氣設備 第2－2部分： 高頻手術設備安全專用要求
| Medical electrical equipment - Part 2-2: Particular requirements for the safety of high frequency surgical equipment (IEC 60601-2-2:1998)
|
| EN 60601-2-20-1996
| 醫療電氣設備 第2－20部分：運輸培養箱安全專用要求
| Medical electrical equipment - Part 2-20: Particular requirements for safety of transport incubators (IEC 60601-2-20:1990 + A1:1996)
|
| EN 60601-2-21-1994+A1-1996
| 醫療電氣設備 第2－21部分：嬰兒輻射保暖箱安全專用要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of infant radiant warmers (IEC 60601-2-21:1994)
|
| EN 60601-2-23-2000
| 醫療電氣設備 第2－23部分：經皮分壓監測設備的安全專用要求
| Medical electrical equipment - Part 2-23: Particular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment (IEC 60601-2-23:1999)
|
| EN 60601-2-24-1998
| 醫療電氣設備 第2－24部分：輸液泵和控制器的特殊安全要求
| Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998)
|
| EN 60601-2-25-1995+A1-1999
| 醫療電氣設備 第2－25部分：心電圖機安全專用要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of electrocardiographs (IEC 60601-2-25:1993)
|
| EN 60601-2-26-2003
| 醫用電氣設備 第2－26部分：腦電圖機安全專用要求
| Medical electrical equipment - Part 2-26: Particular requirements for the safety of electroencephalographs (IEC 60601-2-26:2002) / Note: Endorsement notice
|
| EN 60601-2-3-1993+A1-1998
| 醫療電氣設備 第2－3部分：短波治療設備安全專用要求
| Medical electrical equipment; part 2: particular requirements for the safety of short-wave therapy equipment (IEC 60601-2-3:1991)
|
| EN 60601-2-30-2000
| 醫療電器設備 第2-30部分：自動循環間接血壓監視設備和特殊安全要求
| Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment (IEC 60601-2-30:1999)
|
| EN 60601-2-31-1995+A1-1998
| 醫療電器設備 第2－31部分：具有內部能源的體外心臟起搏器安全專用要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of external cardiac pacemakers with internal power source (IEC 60601-2-31:1994)
|
| EN 60601-2-39-1999
| 醫療電氣設備 第2－39部分：腹膜透析設備安全專用要求
| Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment (IEC 60601-2-39:1999)
|
| EN 60601-2-40-1998
| 醫療電氣設備 第2－40部分：電子機動描記器及誘發反映設備安全專用要求
| Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromygraphs and evoked response equipment (IEC 60601-2-40:1998)
|
| EN 60601-2-41-2000
| 醫療電氣設備 第2－41部分：外科手術燈和診斷用燈光的安全專用要求
| Medical electrical equipment - Part 2-41: Particular requirements for the safety of surgical luminaires and luminaires for diagnosis (IEC 60601-2-41:2000)
|
| EN 60601-2-43-2000
| 醫療電氣設備 第2－43部分：介入過程用Ｘ射線設備安全專用要求
| Medical electrical equipment - Part 2-43: Particular requirements for the safety of X-ray equipment for interventional procedures (IEC 60601-2-43:2000)
|
| EN 60601-2-45-2001
| 醫用電氣設備 第2－45部分：乳腺X射線攝影設備和乳腺攝影立體定位器安全專用要求
| Medical electrical equipment - Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices (IEC 60601-2-45:2001)
|
| EN 60601-2-46-1998
| 醫用電氣設備 第2－46部分：手術臺安全專用要求
| Medical electrical equipment - Part 2-46: Particular requirements for the safety of operating tables (IEC 60601-2-46:1998)
|
| EN 60601-2-5-2000
| 醫療電氣設備 第2－5部分：超聲治療設備安全專用要求
| Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment (IEC 60601-2-5:2000)
|
| EN 60601-2-50-2002
| 醫用電氣設備 第2－50部分：嬰兒光治療設備安全專用要求
| Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment (IEC 60601-2-50:2000 + Corrigendum March 2001)
|
| EN 60601-2-7-1998
| 醫療電氣設備 第2－7部分：診斷X射線發生裝置的高壓發生器安全專用要求
| Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators (IEC 60601-2-7:1998)
|
| EN 60601-2-8-1997+A1-1997
| 醫療電氣設備 第2－8部分：在10 kV至1 MV治療X射線發生裝置安全專用要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of therapeutic X-ray equipment operating in the range 10 kV to 1 MV (IEC 60601-2-8:1987)
|
| EN 60601-2-9-1996
| 醫用電器設備 第2－9部分：放射治療中與患者接觸的計量?jī)x與輻射探測器連接的安全專用要求
| Medical electrical equipment - Part 2-9: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors (IEC 60601-2-9:1996)
|
| EN 60831-1-1996+A2-2003
| 額定電壓1000V及以下交流電系統用自動恢復功能型分流電力電容器 第1部分：總則 性能、試驗及評定 安全要
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60831-1:1996)
|
| EN 60871-1-1997
| 額定電壓超過1kV的交流電力系統用并聯電容器 第1部分：總則 性能、試驗和額定 安全要求 安裝和運行指南
| Shunt capacitors for a.c. power systems having a rated voltage above 1kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60871-1:1997)
|
| EN 60931-1-1996+A1-2003
| 額定電壓1000V(包括1000V)以下的交流系統用非自動恢復型并聯電力電容器 第1部分：概述 性能、試驗和測定
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60931-1:1996)
|
| EN 60947-7-3-2002
| 低壓開關裝置和控制裝置 第7-3部分：輔助設備 引線接線板的安全要求
| Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment; Safety requirements for fuse terminal blocks (IEC 60947-7-3:2002) / Note: Endorsement notice
|
| EN 60968-1990+A1-1993+A2-1999
| 普通照明用自鎮流燈 安全要求
| Self-ballasted lamps for general lighting services; safety requirements (IEC 60968:1988, modified)
|
| EN 60999-1-2000
| 連接器件 銅導線 有螺紋式和無螺紋式夾緊裝置的安全要求 第1部分：從0.2－35mm2(包括35mm2)導線用的夾緊
| Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2
|
| EN 60999-2-2003
| 連接器件 電銅導體 有螺釘和無螺釘型的線夾裝置的安全要求 第2部分：35mm至300mm導線線夾裝置的特殊要求
| Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm<(hoch)2> up to 300 mm<(hoch)2> (included) (IEC 60999-2
|
| EN 61010-031-2002
| 測量、控制和實驗室用電氣設備的安全要求 第3-031部分：電氣測量和試驗用手持探針組件
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002)
|
| EN 61010-1-2001
| 測量、控制和實驗室用電子設備的安全要求 第1部分：一般要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements (IEC 61010-1:2001) / Note: Includes Corrigendum of June 2002
|
| EN 61010-2-010-1994
| 測量、控制和試驗室用電氣設備的安全要求 第2-010部分：材料加熱 用實驗室設備的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:1992, modified)
|
| EN 61010-2-020-1994
| 測量、控制和試驗室用電氣設備的安全要求 第2-020部分：實驗室離心機的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020, modified)
|
| EN 61010-2-032-2002
| 測量、控制和實驗室用電氣設備的安全要求 第2-032部分：電氣測量和試驗用手持和手操作電流傳感器的特殊要
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002) / Note: Endorsem
|
| EN 61010-2-041-1996
| 測量、控制和實驗室用電氣設備的安全要求 第２－４１部分：醫療材料處理及實驗室加工用蒸壓器的的特殊要求
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes (IEC 61010-2-041:1996)
|
| EN 61010-2-042-1997
| 測量、控制和實驗室用電氣設備的安全要求 第2－042部分：醫用材料處理及實驗室加工用毒性氣體蒸壓器和消毒
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010)
|
| EN 61010-2-043-1997
| 測量、控制和實驗室用電氣設備的安全要求 第2－043部分：醫用材料處理及實驗室加工用熱空氣或熱惰性氣體干
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory proc
|
| EN 61010-2-045-2000
| 測量、控制和實驗室用電氣設備的安全要求 第2－045部分：醫療、制藥、獸醫和試驗室用洗滌器消毒的特殊要求
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields (IEC 61010-2-045:2000)
|
| EN 61010-2-051-1995
| 測量、控制和實驗室用電氣設備的安全要求 第２－５１部分：機械攪拌用實驗室設備的特殊要求
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mechanical mixing and stirring (IEC 61010-2-051:1995)
|
| EN 61010-2-061-1996
| 測量、控制和實驗室用電氣設備的安全要求 第２－６１部分：具有熱原子化和離子化的試驗室用原子能譜儀的特
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:1995)
|
| EN 61010-2-081-2002
| 測量、控制和實驗室用電氣設備的安全要求 第２－８１部分：分析和其他用途的自動及半自動試驗室設備的特殊
| Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001) / Note: Endorsemen
|
| EN 61010-2-081/prA1-2003
| 測量、控制和實驗室用電氣設備的安全要求 第２－８１部分：分析和其他用途的自動及半自動試驗室設備的特殊
| IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
|
| EN 61010-2-101-2002
| 測量、控制和實驗室用電氣設備的安全要求 第2-101部分：生物體外診斷(IVD)醫療設備的特殊要求
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment (IEC 61010-2-101:2002, modified)
|
| EN 61011-1-1992
| 與供電干線連接的電池供電的電牧欄增能器的安全要求
| Electric fence energizers; safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains (IEC 61011-1:1989, modified)
|
| EN 61011-1992
| 電牧欄增能器 電網供電的電牧欄增能器的安全要求
| Electric fence energizers; safety requirements for mains-operated electric fence energizers (IEC 61011:1989, modified)
|
| EN 61011-2-1992
| 不與供電干線連接的電池供電的電牧欄增能器的安全要求
| Electric fence energizers; safety requirements for battery-operated electric fence energizers not for connection to the supply mains (IEC 61011-2:1990, modified)
|
| EN 61048-1993+A1-1996+A2-1999
| 管形熒光燈和其它放電電燈電路用電容器的一般要求和安全要求規范
| Capacitors for use in tubular fluorescent and other discharge lamp circuits; general and safety requirements (IEC 61048:1991, modified + corrigendum 1992)
|
| EN 61050-1992+A1-1995
| 空載輸出電壓超過1000V的管形放電用變壓器規范(一般叫做氖管變壓器) 一般要求和安全要求
| Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers); general and safety requirements (IEC 61050:1991 + corrigendum 1992, modified)
|
| EN 61204-1995+A1-2001
| 直流輸出的低壓電源裝置 性能特性和安全要求
| Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements (IEC 61204:1993, modified)
|
| EN 61210-1995
| 連接器件 銅導線用扁型速接端子 安全要求
| Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified)
|
| EN 61293-1994
| 電氣設備電源額定值的標記 安全要求
| Marking of electrical equipment with ratings related to electrical supply - Safety requirements (IEC 61293:1994)
|
| EN 61347-1-2001
| 燈的控制裝置 第1部分：一般要求和安全要求
| Lamp controlgear - Part 1: General and safety requirements (IEC 61347-1:2000)
|
| EN 61347-1/prA1-2003
| 燈的控制裝置 第1部分：一般要求和安全要求 修改prA1
| IEC 61347-1, Am. 1: Lamp controlgear - Part 1: General and safety requirements
|
| EN 61800-5-1-2003
| 可調速電力傳動系統 第5-1部分：安全要求 電氣、熱量和能量
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy (IEC 61800-5-1:2003) / Note: Endorsement notice
|
| EN 61984-2001
| 連接器 安全要求和試驗
| Connectors - Safety requirements and tests (IEC 61984:2001)
|
| EN 62040-1-1-2003
| 不間斷電源(UPS)規范 第1-1部分 操作區域使用的UPS的一 般要求和安全要求
| Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas (IEC 62040-1-1:2002 + Corrigendum 2002) / Note: Endorsement notice
|
| EN 62083-2001
| 醫用電氣設備 放射治療計劃系統的安全要求
| Medical electrical equipment - Requirements for the safety of radiotheraphy treatment planning systems (IEC 62083:2000)
|
| EN 62133-2003
| 含堿性或其它非酸性電解液的二次電池和電池組 便攜式密封二次電池和由它們組成的便攜式電池組的安全要求
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications (IEC 62133:2002) / Note: Endorsement notice
|
| EN 710-1997
| 鑄模、制蕊機械、工廠及相關設備的安全要求
| Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
|
| EN 716-1-1995
| 家具 家用兒童帆布床和折疊床 第1部分：安全要求
| Furniture - Childrens cots and folding cots for domestic use - Part 1: Safety requirements
|
| EN 741-2000
| 連續處理設備和系統 散裝材料氣動處理用系統及其元件的安全要求
| Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
|
| EN 746-1-1997
| 工業熱處理設備 第1部分：工業熱處理設備通用安全要求
| Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
|
| EN 746-2-1997
| 工業熱處理設備 第2部分：燃燒和燃料處理系統的安全要求
| Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
|
| EN 746-3-1997
| 工業熱處理設備 第3部分：環境氣體產生和使用的安全要求
| Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
|
| EN 746-4-2000
| 工業熱處理設備 第4部分：熱浸電鍍熱處理設備的特殊安全要求
| Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
|
| EN 746-5-2000
| 工業熱處理設備 第5部分：鹽浴熱處理設備的特殊安全要求
| Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment
|
| EN 746-8-2000
| 工業熱處理設備 第8部分：淬火設備的特殊安全要求
| Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment
|
| EN 747-1-1993
| 家具 家用床具 第1部分：安全要求
| Furniture; bunk beds for domestic use; part 1: safety requirements
|
| EN 747-1/prA1-2000
| 家具 家用床具 第1部分：安全要求 修改A1
| Furniture - Bunk beds for domestic use - Part 1: Safety requirements; Amendment A1
|
| EN 748-1998+A1-1998
| 運動場設備 足球球門 功能和安全要求、試驗方法（包括修改A1）
| Playing field equipment - Football goals - Functional and safety requirements, test methods (including Amendment 1:1998)
|
| EN 749-1998+A1-1998
| 運動場設備 手球球門 功能和安全要求、試驗方法（包括修改A1）
| Playing field equipment - Handball goals - Functional and safety requirements, test methods (including Amendment 1:1998)
|
| EN 750-1998+A1-1998
| 運動場設備 曲棍球球門 功能和安全要求、試驗方法（包括修改A1）
| Playing field equipment - Hockey goals - Functional and safety requirements, test methods (including Amendment 1:1998)
|
| EN 792-1-2000
| 手持式非電動工具 安全要求 第1部分：非螺紋機械緊固件用組裝動力工具
| Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
|
| EN 792-10-2000
| 手持式非電動工具 安全要求 第10部分：壓縮動力工具
| Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
|
| EN 792-11-2000
| 手持式非電動工具 安全要求 第11部分：毛坯下料機和剪切機
| Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
|
| EN 792-12-2000
| 手持式非電動工具 安全要求 第12部分：小循環、小振蕩和往復式鋸
| Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
|
| EN 792-13-2000
| 手持式非電動工具 安全要求 第13部分：緊固件傳動工具
| Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
|
| EN 792-2-2000
| 手持式非電動工具 安全要求 第2部分：切割和卷邊動力工具
| Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
|
| EN 792-3-2000
| 手持式非電動工具 安全要求 第3部分：鉆孔機和攻絲機
| Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
|
| EN 792-4-2000
| 手持式非電動工具 安全要求 第4部分：非旋轉沖擊動力工具
| Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
|
| EN 792-5-2000
| 手持式非電動工具 安全要求 第5部分：旋轉式?jīng)_擊鉆孔機
| Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
|
| EN 792-6-2000
| 手持式非電動工具 安全要求 第6部分：螺紋緊固件用組裝動力工具
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
|
| EN 792-7-2001
| 手持式非電動工具 安全要求 第7部分：研磨機
| Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
|
| EN 792-8-2001
| 手持式非電動工具 安全要求 第8部分：拋光機和磨沙機
| Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
|
| EN 792-9-2001
| 手持式非電動工具 安全要求 第9部分：硬模研磨機
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
|
| EN 809-1998+AC-2002
| 液體用泵和泵元件 一般安全要求
| Pumps and pump units for liquids - Common safety requirements
|
| EN 847-1-1997+AC-1997
| 木工工具 安全要求 第1部分：銑工具和圓鋸刀片
| Tools for woodworking - Safety requirements - Part 1: Milling tools and circular saw blades / Note: To be replaced by prEN 847-1 (2003-05).
|
| EN 847-2-2001+AC-2003
| 木工工具 安全要求 第2部分：裝配手柄的銑工具的手柄的要求
| Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools
|
| EN 869-1997
| 高壓金屬壓模鑄造器件的安全要求
| Safety requirements for high pressure metal diecasting units
|
| EN 892-1996
| 登山設備 動態登山繩索 安全要求和試驗方法
| Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
|
| EN 893-1999
| 登山設備 鞋底釘 安全要求和試驗方法
| Mountaineering equipment - Crampons - Safety requirements and test methods
|
| EN 913-1996
| 體操器材 一般安全要求和試驗方法
| Gymnastic equipment - General safety requirements and test methods
|
| EN 914-1996
| 體操器材 雙杠和組合式高低杠 功能及安全要求、試驗方法
| Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Functional and safety requirements, test methods
|
| EN 915-1996
| 體操器材 高低杠 功能及安全要求、試驗方法
| Gymnastic equipment - Asymmetric bars - Functional and safety requirements, test methods
|
| EN 930-1997
| 鞋、皮革和仿皮革產品制造機械 固定、刷洗、上光和整理機械 安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
|
| EN 930/prA1-2001
| 鞋、皮革和仿皮革產品制造機械 固定、刷洗、上光和整理機械 安全要求 修改A1
| Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements; Amendment A1
|
| EN 931-1997
| 鞋制造機械 拉伸機械 安全要求
| Footwear manufacturing machines - Lasting machines - Safety requirements
|
| EN 931/prA1-2001
| 鞋制造機械 拉伸機械 安全要求 修改A1
| Footwear manufacturing machines - Lasting machines - Safety requirements; Amendment A1
|
| EN 957-1-1998+A1-1998
| 固定的訓練器材 第1部分：一般安全要求和試驗方法（包括修改A1：1998）
| Stationary training equipment - Part 1: General safety requirements and test methods (including Amendment 1:1998)
|
| EN 957-2-2003
| 固定的訓練器材 第2部分：體力訓練器材 附加的特殊安全要求和試驗方法
| Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods
|
| EN 957-4-1996
| 固定的訓練器材 第4部分：體力訓練長椅 附加的特殊安全要求和試驗方法
| Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods
|
| EN 957-5-1996
| 固定的訓練器材 第5部分：踏板轉動訓練器材 附加的特殊安全要求和試驗方法
| Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
|
| EN 957-6-2001
| 固定的訓練器材 第6部分：踏車 附加的特殊安全要求和試驗方法
| Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
|
| EN 957-7-1998
| 固定的訓練器材 第7部分：劃艇機械 附加的特殊安全要求和試驗方法
| Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods
|
| EN 957-8-1998
| 固定的訓練器材 第8部分：跑步機、踏步器和登山器 附加的特殊安全要求和試驗方法
| Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods
|
| EN 957-9-2003
| 固定的訓練器材 第9部分：橢圓形教練器 附加的特殊安全要求和試驗方法
| Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods
|
| EN 958-1996
| 登山設備 Klettersteig攀登用能量吸收系統 安全要求和試驗方法
| Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
|
| EN 959-1996
| 登山設備 巖石錨栓 安全要求和試驗方法
| Mountaineering equipment - Rock anchors - Safety requirements and test methods
|
| EN 972-1998
| 制革機械 往復滾柱機械 安全要求
| Tannery machines - Reciprocating roller machines - Safety requirements
|
| EN 982-1996
| 機械的安全 流體動力系統及其元件的安全要求 液壓裝置
| Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
|
| EN 983-1996
| 機械安全 流體動力系統及其元件的安全要求 氣壓裝置
| Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
|
| EN 996-1995
| 打樁設備 安全要求
| Piling equipment - Safety requirements
|
| EN ISO 10079-1-1999
| 醫療吸引設備 第1部分：電動吸引設備 安全要求
| Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements (ISO 10079-1:1999)
|
| EN ISO 10472-1-1997
| 工業洗衣機安全要求 第1部分：通用要求
| Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
|
| EN ISO 10472-2-1997
| 工業洗衣機安全要求 第2部分：洗衣機和洗滌脫水機
| Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)
|
| EN ISO 10472-3-1997
| 工業洗衣機安全要求 第3部分：管道式洗滌(聯合)機及相關機械
| Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)
|
| EN ISO 10472-4-1997
| 工業洗衣機安全要求 第4部分：空氣干燥機
| Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
|
| EN ISO 10472-5-1997
| 工業洗衣機安全要求 第5部分：織物熨燙機、進布機和折布機
| Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)
|
| EN ISO 10472-6-1997
| 工業洗衣機安全要求 第6部分：熨燙及熔壓機
| Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)
|
| EN ISO 11102-1-1997
| 往復式內燃機 手柄起動裝置 第1部分：安全要求和試驗
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)
|
| EN ISO 11111-1995
| 紡織機械的安全要求
| Safety requirements for textile machinery (ISO 11111:1995)
|
| EN ISO 11442-1-1996
| 技術產品文件 計算機技術信息處理 第1部分：安全要求
| Technical product documentation - Handling of computer-based technical information - Part 1: Security requirements (ISO 11442-1:1993)
|
| EN ISO 11680-1-2000
| 林業機械 動力桿式修枝鋸的安全要求和試驗 第1部分：側掛式桿式修枝鋸
| Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
|
| EN ISO 11680-2-2000
| 林業機械 動力桿式修枝鋸的安全要求和試驗 第2部分：攜背負式桿式修枝鋸
| Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)
|
| EN ISO 11681-2-1998
| 林業機械 便攜式鏈鋸的安全要求和試驗 第2部分：修枝鋸
| Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:1998)
|
| EN ISO 11681-2/prA1-2003
| 林業機械 便攜式鏈鋸的安全要求和試驗 第2部分：修枝鋸 修改A1
| Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 2: Chain-saws for tree service; Amendment A1 (ISO 11681-2:1998/FDAM 1:2003) / Note: Intended as an amendment to EN ISO 11681-2 (1998-04).
|
| EN ISO 14620-1-2002
| 航天系統 安全要求 第1部分：安全系統
| Space systems - Safety requirements - Part 1: System safety (ISO 14620-1:2002)
|
| EN ISO 15615-2002
| 氣焊設備 焊接、切割及相關工藝用多種乙炔發生器 高壓裝置中的安全要求
| Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002)
|
| EN ISO 15641-2001
| 高速切削機床用銑刀 安全要求
| Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
|
| EN ISO 8230-1997
| 使用全氯乙烯的干洗機的安全要求
| Safety requirements for dry-cleaning machines using perchloroethylene (ISO 8230:1997)
|
| EN ISO 8359-1996
| 醫用氧氣濃縮器 安全要求
| Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996)
|
| ENV 1178-1-1994
| 家具 家用兒童高椅 第1部分：安全要求
| Furniture - Childrens high chairs for domestic use - Part 1: Safety requirements (ISO 9221-1, modified)
|
| ENV 12520-2000
| 家具 座椅 機械和結構安全要求
| Domestic furniture - Seating - Mechanical and structural safety requirements
|
| ENV 12521-2000
| 家具 桌子 機械和結構安全要求
| Domestic furniture - Tables - Mechanical and structural safety requirements
|
| ENV 1729-2-2001
| 家具 教育部門使用的桌椅 第2部分：安全要求和試驗方法
| Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods
|
| ENV 1907-1999
| 用繩索運送乘客的安全要求 術語
| Safety requirements for passenger transportation by rope - Terminology
|
| ENV 581-2-2000
| 戶外家具 野營、家用和訂做的座椅和桌子 第2部分：樣品的機械安全要求和試驗方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for sampling
|
| ENV 61400-1-1995
| 風輪發電機系統 第1部分：安全要求
| Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1994)
|
| HD 1000-1988
| 預制組件制成的服務用和施工用腳手架 材料、尺寸、設計荷載和安全要求
| Service and working scaffolds made of prefabricated elements; materials, dimensions, design loads and safety requirements
|
| HD 1004-1992
| 預制組件制成的移動通道和工作塔 材料、尺寸、設計荷載和安全要求
| Mobile access and working towers made of prefabricated elements; materials, dimensions, design loads and safety requirements
|
| HD 280.2 S1-1990
| 電扇和穩壓器的安全要求 第2部分：船用電扇和穩壓器
| Safety requirements for electric fans and regulators; Part 2: Fans and regulators for use in ships
|
| prEN 1010-1993
| 印刷和紙張轉換機的設計和結構的技術安全要求
| Technical safety requirements for the design and construction of printing and paper converting machines
|
| prEN 1178-1-2000
| 家具 家用兒童高椅 第1部分：安全要求
| Furniture - High chairs for domestic use - Part 1: Safety requirements
|
| prEN 12001-2002
| 用于混凝土和砂漿輸送、噴射和布料的機械 安全要求
| Conveying, spraying and placing machines for concrete and mortar - Safety requirements
|
| prEN 12044-1998
| 鞋類、皮革及仿皮革制品制造機械 切割及沖壓機械安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
|
| prEN 12151-1995
| 混凝土和灰漿拌制機械與設備 安全要求
| Machinery and plant for the preparation of concrete and mortar - Safety requirements
|
| prEN 12215-1995
| 涂覆設備 有機液體涂料的噴霧室應用 安全要求
| Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
|
| prEN 12336-1996
| 隧道機械 盾構、水平推進機和內層安裝設備 安全要求
| Tunneling machines - Shield machines, horizontal thrustboring machines, lining erection equipment - Safety requirements
|
| prEN 12387-1996
| 鞋、皮革和人造革制品加工機械 標準尺寸鞋修理設備 安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
|
| prEN 12397-1996
| 索道乘運安全要求 運行
| Safety requirements for passenger transportation by rope - Operation
|
| prEN 12408-1996
| 乘運索道的安全要求 質量控制
| Safety requirements for cableways for passenger transportation by rope - Quality control
|
| prEN 1247-2003
| 鑄造機械 鐵水色澆鑄設備 離心鑄造機械 連續和半連續鑄造機械的安全要求
| Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
|
| prEN 12581-1996
| 涂敷設備 有機液體涂料涂敷用浸漬和電泳涂敷機械 安全要求
| Coating plants - Dip and electrophoretic coating machinery for application of organic liquid coating materials - Safety requirements
|
| prEN 12609-1996
| 混凝土攪拌車 安全要求
| Truck mixers - Safety requirements
|
| prEN 12621-1996
| 涂料壓力輸送和或供給機械 安全要求
| Machinery for the supply and/or circulation of coating materials under pressure - Safety requirements
|
| prEN 12649-1996
| 混凝土壓實機械和抹平機械 安全要求
| Concrete compactors and floating machines - Safety requirements
|
| prEN 12757-1-1997
| 涂層材料的攪拌機械 安全要求 第1部分：整修車輛表面用涂料的攪拌機械
| Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
|
| prEN 12779-1997
| 木工機械 固定式木屑和粉塵排除裝置 安全相關性能和安全要求
| Woodworking machines - Chips- and dust extraction systems with fixed installation - Safety related performance and safety requirements
|
| prEN 12866-1997
| 天然石料開采和加工機械和設備 金剛石線鋸安全要求
| Machines and plants for mining and tooling of natural stone - Safety requirements for diamond wire saws
|
| prEN 12867-1997
| 天然石料開采和加工機械的設備 鏈?zhǔn)胶蛶搅⑴俅舶踩? | Machines and plants for mining and tooling of natural stone - Safety requirements for chain and belt slotting machines
|
| prEN 12921-1-1997
| 使用液體或蒸氣的對工業品進行表面清潔和預處理的機器 第1部分：通用安全要求
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 1: Common safety requirements
|
| prEN 12927-1-1997
| 索道客運的安全要求 鋼索 第1部分：鋼索及其端部接頭的選擇準則
| Safety requirements for passenger transport by rope - Ropes - Part 1: Selection criteria for ropes and their end fixings
|
| prEN 12927-2-1999
| 索道客運的安全要求 鋼索 第2部分：安全系數
| Safety requirements for passenger transportation by rope - Ropes - Part 2: Safety factors
|
| prEN 12927-3-1997
| 索道客運的安全要求 鋼索 第3部分：六股牽引、承載-牽引和拖拉鋼索的長絞接
| Safety requirements for passenger transport by rope - Ropes - Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes
|
| prEN 12927-4-2001
| 索道客運的安全要求 鋼索 第4部分：端部接頭
| Safety requirements for passenger transportation by rope - Ropes - Part 4: End fixing
|
| prEN 12927-5-1997
| 索道客運的安全要求 鋼索 第5部分：貯存、運輸、安裝和拉伸
| Safety requirements for passenger transportation by rope - Ropes - Part 5: Storage, transportation, installation and tensioning
|
| prEN 12927-6-1999
| 索道客運的安全要求 鋼索 第6部分：報廢標準
| Safety requirements for passenger transport by rope - Ropes - Part 6: Discard criteria
|
| prEN 12927-7-1998
| 索道客運的安全要求 鋼索 第7部分：計算、修理和維護
| Safety requirements for passenger transportation by rope - Ropes - Part 7: Calculation, repair and maintenance
|
| prEN 12927-8-1998
| 索道客運的安全要求 鋼索 第8部分：無損檢測
| Safety requirements for passenger transportation by rope - Ropes - Part 8: Non-destructive testing
|
| prEN 12929-1-1997
| 索道客運的安全要求 總則 第1部分：對所有設備的要求
| Safety requirements for passenger transportation by rope - General provisions - Part 1: Requirements for all installations
|
| prEN 12929-2-1998
| 索道客運的安全要求 總則 第2部分：不帶運輸車制動器的可反向雙線架空索道的附加要求
| Safety requirements for passenger transportation by rope - General provisions - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
|
| prEN 12930-1997
| 索道客運的安全要求 計算
| Safety requirements for passenger transportation by rope - Calculations
|
| prEN 12981-1997
| 噴鍍?cè)O(shè)備 有機粉狀涂料噴鍍間 安全要求
| Coating plants - Spray booths for application of organic powder coating material - Safety requirements
|
| prEN 13020-1997
| 路面處理機械 安全要求
| Road-surface-treatment machines - Safety requirements
|
| prEN 13035-10-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第10部分：研磨和拋光機
| Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 10: Grinding and polishing machines
|
| prEN 13035-11-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第11部分：鉆機
| Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
|
| prEN 13035-13-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第13部分：層壓玻璃生產用機械
| Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 13: Machines for the production of laminated glass
|
| prEN 13035-14-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第14部分：鏡面噴鍍?cè)O(shè)備
| Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 14: Mirror coating plant
|
| prEN 13035-5-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第5部分：堆卸機械裝置
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and destacking
|
| prEN 13035-6-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第6部分：卸貨機
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break out
|
| prEN 13035-7-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第7部分：層壓玻璃裁切機
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
|
| prEN 13035-8-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第8部分：生產保溫玻璃用的機械和設備
| Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 8: Machines and plants for production of insulating glass
|
| prEN 13035-9-1997
| 平板玻璃制造、處理和加工用機械和設備 安全要求 第9部分：洗滌裝置
| Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
|
| prEN 13042-1-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第1部分：供料機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
|
| prEN 13042-10-1999
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第10部分：實驗室玻璃裁切機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 10: Machines for cutting laboratory glass
|
| prEN 13042-11-1999
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第11部分：實驗室玻璃熱處理機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 11: Machines for thermal processing of laboratory glass
|
| prEN 13042-2-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第2部分：供料操縱機械
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding
|
| prEN 13042-3-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第3部分：IS機械
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
|
| prEN 13042-4-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第4部分：多臺位車床
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 4: Multi-station rotating machines
|
| prEN 13042-6-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第6部分：多臺位多級檢驗機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 6: Multi-station multi-inspection machines
|
| prEN 13042-7-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第7部分：移動探頭檢驗機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 7: Travelling head inspection machine
|
| prEN 13042-8-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第8部分：固定探頭檢驗機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 8: Fixed head inspection machines
|
| prEN 13042-9-1997
| 空心玻璃制造、處理和加工用機械和設備 安全要求 第9部分：撞擊試驗機
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 9: Impact testing machines
|
| prEN 13107-1997
| 索道客運的安全要求 土木工程
| Safety requirements for passenger transportation by rope - Civil engineering works
|
| prEN 13209-1-2001
| 兒童使用和看護用品 嬰兒車 安全要求和試驗方法 第1部分：框背車
| Child use and care articles - Child carriers; Safety requirements and test methods - Part 1: Framed back carriers
|
| prEN 13209-1998
| 兒童看護用品 嬰兒車 安全要求和試驗方法
| Child care articles - Baby carriers - Safety requirements and test methods
|
| prEN 13210-2001
| 兒童使用和看護用品 兒童馬具、韁繩及類似物品 安全要求和試驗方法
| Child use and care articles - Childrens harnesses, reins and similar type articles - Safety requirements and test methods
|
| prEN 13223-1998
| 索道客運的安全要求 機械
| Safety requirements for passenger transportation by rope - Mechanics
|
| prEN 13243-1998
| 索道客運的安全要求 電氣設備
| Safety requirements for passenger transportation by rope - Electrical devices
|
| prEN 13355-1998
| 噴鍍?cè)O(shè)備 合成間 安全要求
| Coating plants - Combines booths - Safety requirements
|
| prEN 13386-1998
| 液泵 潛水泵和泵部件 特殊安全要求
| Liquid pumps - Submersible pumps and pump units - Particular safety requirements
|
| prEN 13418-1999
| 橡膠和塑料機械 薄膜或板材卷繞機 安全要求
| Rubber and plastics machines - Winding machines for film or sheet - Safety requirements
|
| prEN 13443-2-2002
| 建筑物內水調節設備 機械過濾器 第2部分：顆粒級1μm到80μm以下 性能和安全要求
| Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 micrometre to less than 80 micrometres - Requirements for performance, safety and testing
|
| prEN 13451-10-2001
| 泳池設備 第10部分：跳臺、跳板和相關設備的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
|
| prEN 13451-11-2003
| 泳池設備 第11部分：可移動池地板和池壁的附加特殊安全要求和試驗方法
| Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
|
| prEN 13457-1999
| 制鞋、皮革和人造革用機械 分離、切片、修整、膠合及膠合烘干機械 安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, trimming, cementing and cement drying machines - Safety requirements
|
| prEN 13675-1999
| 機械安全性 軋管和滾軋機及線材加工設備的安全要求
| Safety of machinery - Safety requirements for tube forming and rolling mills and finishing line equipment
|
| prEN 13796-1-2002
| 索道客運的安全要求 承載器 第1部分：手柄、座艙、椅子、T形條和小底板
| Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier truks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
|
| prEN 13796-3-2002
| 索道客運的安全要求 承載器 第3部分：疲勞試驗
| Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue testing
|
| prEN 13954-2000
| 食品加工機械 面包切片機 衛生和安全要求
| Food processing machinery - Bread slicers - Safety and hygiene requirements
|
| prEN 14344-2001
| 兒童用品 童車座椅 試驗方法和安全要求
| Child care articles - Child seats for cycles - Safety requirements and test methods
|
| prEN 14372-2002
| 兒童用品 餐具和喂食器具 試驗和安全要求
| Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests
|
| prEN 14413-1-2003
| 娛樂潛水服務 自帶潛水呼吸器的指導訓練的最低安全要求 第1部分：1級
| Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Part 1: Level 1
|
| prEN 14413-2-2003
| 娛樂潛水服務 自帶潛水呼吸器的指導訓練的最低安全要求 第2部分：2級
| Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Part 2: Level 2
|
| prEN 14434-2002
| 公共教育用寫字臺 人類工效學技術和安全要求和其試驗方法
| Writing board for educational institutions - Ergonomic, technical and safety requirements and their test methods
|
| prEN 14461-2002
| 工業風扇 安全要求
| Industrial fans - Safety requirements
|
| prEN 14468-1-2003
| 乒乓球 第1部分：乒乓球臺 試驗方法和、功能和安全要求
| Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods
|
| prEN 1466-2003
| 兒童保育品 便攜式帆布床和支撐物 安全要求和試驗方法
| Child care and use articles - Carry cots and stands - Safety requirements and test methods / Note: Intended as replacement for EN 1466 (1998-01).
|
| prEN 1501-2-2000
| 垃圾車及其相關提升設備 一般要求和安全要求 第2部分：邊側裝載的垃圾車
| Refuse collection vehicles and their associated lifting device - General requirements and safety requirements - Teil 2: Side loaded refuse collection vehicles
|
| prEN 1672-1-2000
| 食品加工機械 基本設計原理 第1部分：安全要求
| Food processing machinery - Basic concepts - Part 1: Safety requirements
|
| prEN 1709-1994
| 輸送旅客的纜車安全要求 試運轉前的檢驗 維護和操作試驗
| Safety requirements for cableways for passenger transport - Precommissioning inspection, maintenance and operational tests
|
| prEN 1710-2003
| 地下采礦機械 具有沼氣危險采礦區域的應用條件 安全要求
| Equipment and components intended for use in potentially explosive atmospheres in mines
|
| prEN 1743-1-1994
| 家具 野營家用和承包用戶外餐桌 家用和公共場所 第1部分：一般安全要求
| Furniture - Outdoor tables for camping, domestic and contract use - Part 1: General safety requirements
|
| prEN 1743-2-1994
| 家具 家用、承包和野營用戶外餐桌 第2部分：機械安全要求和試驗
| Furniture - Outdoor tables for domestic, contract and camping use - Part 2: Mechanical safety requirements and test methods
|
| prEN 1756-2-1997
| 后置升降裝置 安裝在用輪子行駛的車輛上的平臺式升降裝置 安全要求 第2部分：乘客用后置升降裝置
| Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
|
| prEN 1777-1994
| 防火設備用水壓平臺 安全要求和測試
| Hydraulic platforms (HPs) for fire services - Safety requirements and testing
|
| prEN 1804-3-2000
| 地下采礦機械 水壓坑道頂棚支架的安全要求 第3部分：水壓控制系統
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
|
| prEN 1829-1-2003
| 高壓清洗器 高壓水噴射機 安全要求
| High pressure cleaners - High pressure water jet machines - Safety requirements; Part 1: General description
|
| prEN 1887-2001
| 兒童保育品 可變高度椅子 安全要求和試驗方法
| Child care articles - Convertible high chairs - Safety requirements and test methods
|
| prEN 1908-1995
| 用繩索運送乘客的安全要求 緊系裝置
| Safety requirements for passenger transportation by rope - Tensioning devices
|
| prEN 1909-1995
| 用繩索運送乘客的安全要求 救險與疏散
| Safety requirements for passenger transportation by rope - Recovery and evacuation
|
| prEN 203-1-2002
| 氣體加熱供膳設備 第1部分：安全要求
| Gas heated catering equipment - Part 1: safety requirements
|
| prEN 289-2000
| 橡膠和塑料機械 壓力機 安全要求
| Rubber and plastics machines - Presses - Safety requirements
|
| prEN 45545-5-2003
| 鐵路應用 鐵路車輛的防火 第5部分：包括母線電器設備防火安全要求和磁懸浮列車
| Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
|
| prEN 50115-1995
| 醫用電氣設備 第2部分：手術臺的特殊的安全要求
| Medical electrical equipment - Part 2: Particular safety requirements for operating tables
|
| prEN 50158-1993
| 信息技術設備中供電的安全要求
| Safety requirements for power feeding in information technology installations
|
| prEN 50188-1994
| 電動工具 環行鋸工作臺 安全要求和測試
| Electric motor-operated tools; tables for circular saws; safety requirements and tests
|
| prEN 50276-1997
| 牽引蓄電池產生的氣體發射 封閉式充電區的通風和安全要求
| Gaseous emissions produced by traction batteries - Ventilation and general safety requirements for closed charging areas
|
| prEN 50280-1997
| 小的發射/接收天線系統 安全要求
| Small transmitting/receiving antenna systems - Safety requirements
|
| prEN 50331-1-1999
| 建筑物內的光電系統 第1部分：安全要求
| Photovoltaic systems in buildings - Part 1: Safety requirements
|
| prEN 61010-2-010-2003
| 測量、控制和試驗室用電氣設備的安全要求 第2-010部分：材料加熱 用實驗室設備的特殊要求 草案
| IEC 61010-2-010, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material
|
| prEN 61010-2-041-1996
| 測量、控制和實驗室用電氣設備的安全要求 第2－41部分：醫療材料處理及實驗室加工用蒸壓器的的特殊要求
| Draft IEC 1010-2-041: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
|
| prEN 61010-2-051-2003
| 測量、控制和實驗室用電氣設備的安全要求 第２－５１部分：機械攪拌用實驗室設備的特殊要求 草案
| IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
|
| prEN 61010-2-061-2003
| 測量、控制和實驗室用電氣設備的安全要求 第２－６１部分：具有熱原子化和離子化的試驗室用原子能譜儀的特
| IEC 61010-2-061, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
|
| prEN 61010-2-071-1998
| 測量、控制和實驗室用電氣設備的安全要求 第2－71部分：
| IEC 61010-2-071: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-071: Particular requirements for equipment used in extended environments
|
| prEN 61048-2001
| 管形熒光燈和其它放電電燈電路用電容器的一般要求和安全要求規范 草案
| Draft IEC 61048, Ed. 2: Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
|
| prEN 61400-1-2003
| 風輪發電機系統 第1部分：安全要求
| Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1999, modified) / Note: Intended as replacement for ENV 61400-1 (1995-02).
|
| prEN 616-1991
| 連續操作設備和系統 設計、制造、安裝和試運轉階段的通用安全要求
| Continuous handling equipment and systems; common safety requirements for design, manufacturing, erection and commissioning stages
|
| prEN 61814-1997
| 人體接觸電極器具 沒有醫療監督條件下使用的安全要求
| IEC 61814: Appliances with human body contact electrodes - Safety requirements for use without medical supervision
|
| prEN 716-3-2000
| 家具 家用兒童帆布床和折疊床 第3部分：折疊床的附加安全要求和試驗方法
| Furniture - Childrens cots and folding cots for domestic use - Part 3: Additional safety requirements and test methods for folding cots
|
| prEN 746-6-1994
| 工業熱處理設備 第6部分：液態處理熱處理設備的特殊安全要求
| Industrial thermoprocessing equipment - Part 6: Particular safety requirements for liquid phase treatment thermoprocessing equipment
|
| prEN 746-7-1994
| 工業熱處理設備 第7部分：真空熱處理設備的特殊安全要求
| Industrial thermoprocessing equipment - Part 7: Special safety requirements for vacuum thermoprocessing equipment
|
| prEN 792-14-1995
| 手持式非電動工具 安全要求 第14部分：非螺紋機械緊固件用組裝動力工具
| Hand-held non electric power tools - Safety requirements - Part 14: Assembly power tools for non-threaded mechanical fasteners
|
| prEN 792-15-1995
| 手持式非電動工具 安全要求 第15部分：切割和卷邊動力工具
| Hand-held non electric power tools - Safety requirements - Part 15: Cutting-off and crimping power tools
|
| prEN 847-3-2001
| 木工工具 緊固裝置 第3部分：安全要求
| Tools for woodworking - Clamping devices - Part 3: Safety requirements
|
| prEN 892-2002
| 登山設備 動態登山繩索 安全要求和試驗方法
| Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
|
| prEN ISO 10821-1998
| 工業縫紉機 縫紉機、裝置和系統的安全要求
| Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO/DIS 10821:1998)
|
| prEN ISO 11111-1-2002
| 紡織機械 安全要求 第1部分：一般要求
| Textile machinery - Safety requirements - Part 1: Common requirements (ISO/DIS 11111-1:2002)
|
| prEN ISO 11111-2-2002
| 紡織機械 安全要求 第2部分：紡紗準備機和紡紗機
| Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO/DIS 11111-2:2002)
|
| prEN ISO 11111-3-2002
| 紡織機械 安全要求 第3部分：無紡紗機
| Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO/DIS 11111-3:2002)
|
| prEN ISO 11111-4-2002
| 紡織機械 安全要求 第4部分：紗線加工機及制繩機
| Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO/DIS 11111-4:2002)
|
| prEN ISO 11111-5-2002
| 紡織機械 安全要求 第5部分：編織和針織準備機
| Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO/DIS 11111-5:2002)
|
| prEN ISO 11111-6-2002
| 紡織機械 安全要求 第6部分：織物制造機
| Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO/DIS 11111-6:2002)
|
| prEN ISO 11111-7-2002
| 紡織機械 安全要求 第7部分：印染機和精整機
| Textile machinery - Safety requirements - Part 7: Dyeing and finishing machines (ISO/DIS 11111-7:2002)
|
| prEN ISO 11553-1-2002
| 機械安全 激光加工機械 安全要求
| Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02).
|
| prEN ISO 11681-1-2002
| 林業機械 便攜式鏈鋸的安全要求和試驗 第1部分：林業專用鏈鋸
| Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 1: Chain-saws for nomal forest work (ISO/DIS 11681-1:2002)
|
| prEN ISO 12402-1-2003
| 個人救生裝置 第1部分：A級(SOLAS救生衣)的安全要求
| Personal flotation devices - Part 1: Lifejackets for seagoing ships; Safety requirements (ISO/DIS 12402-1:2003)
|
| prEN ISO 12402-2-2003
| 個人救生裝置 第2部分：B級(海邊救生衣、極限條件275牛頓)的安全要求
| Personal flotation devices - Part 2: Lifejackets for extreme offshore conditions (level 275); Safety requirements (ISO/DIS 12402-2:2003)
|
| prEN ISO 12402-3-2003
| 個人救生裝置 第3部分：C級(近海救生衣、150牛頓)的安全要求
| Personal flotation devices - Part 3: Lifejackets for offshore conditions (level 150); Safety requirements (ISO/DIS 12402-3:2003)
|
| prEN ISO 12402-4-2003
| 個人救生裝置 第4部分：D級(內陸/海邊救生衣、100牛頓)的安全要求
| Personal flotation devices - Part 4: Lifejackets for inland/close to shore conditions (level 100); Safety requirements (ISO/DIS 12402-4:2003)
|
| prEN ISO 12402-5-2003
| 個人救生裝置 第5部分：E級(飄浮裝置、50牛頓)的安全要求
| Personal flotation devices - Part 5: Buoyancy aids (level 50); Safety requirements (ISO/DIS 12402-5:2003)
|
| prEN ISO 12402-8-2003
| 個人救生裝置 第8部分：附屬裝置的安全要求及試驗方法
| Personal flotation devices - Part 8: Accessories; Safety requirements and test methods (ISO/DIS 12402-8:2003)
|
| prEN ISO 6218-2002
| 內河船舶 推拖用手操作連接設備 安全要求與主要尺寸
| Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (ISO/DIS 6218:2002)
|
| prHD 25395.1-1986
| 電動草坪割草機、草坪用拖拉機、帶割草附件的草坪用及花園用拖拉機 安全要求和試驗程序 第1部分：定義
| Power lawn mowers, lawn tractors, and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 1: definitions
|
| prHD 25395.2-1986
| 電動草坪割草機、草坪用拖拉機、帶割草附件的草坪用及花園用拖拉機 安全要求和試驗程序 第2部分：基本要
| Power lawn mowers, lawn tractors and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 2: basic requirements
|
| prHD 25395.3-1986
| 電動草坪割草機、草坪用拖拉機、帶割草附件的草坪用及花園用拖拉機 安全要求和試驗程序 第3部分：旋轉割
| Power lawn mowers, lawn tractors and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 3: requirements for rotary mowers
|
| prHD 25395.4-1986
| 電動草坪割草機、草坪用拖拉機、帶割草附件的草坪用及花園用拖拉機 安全要求和試驗程序 第4部分：滾筒(卷
| Power lawn mowers, lawn tractors and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 4: requirements for cylinder (reel) mowers
|
| 編號 | 中文名稱 | 英文名稱 |
|---|