| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2S 136-1977 | 含1%碳-鉻鋼(真空電弧再熔化的)方坯、棒材、鍛件及零件規范.(限定等圓斷面25mm) | Specification for 1% carbon-chromium steel (vacuum arc remelted) billets, bars, forgings and parts (limiting ruling section 25 mm) |
| BS 2S 146-1976 | 含4%鎳-鉻-鉬空氣冷淬硬鋼(真空電弧重熔)方坯、棒材、鍛件及零件規范(1760-1960MPa;限定等圓斷面100mm) | Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm) |
| BS 3423-1986 | 實驗室用玻璃真空器(包括干燥器)的設計推薦規范 | Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use |
| BS 3711-1964 | 鐵路用滾圈式真空制動氣缸規范 | Specification for railway vacuum brake cylinders, rolling ring type |
| BS 4479-9-1990 | 層覆物品設計.第9部分:低壓和真空淀積覆層推薦標準 | Design of articles that are to be coated - Recommendations for low pressure and vacuum deposited coatings |
| BS 5415-2.2 Supplement No. 1-1986 | 電動工商業清潔設備的安全性.特殊要求.清除危害健康的灰塵用H型工業真空吸塵器的規范 | Safety of electrical motor-operated industrial and commercial cleaning appliances - Particular requirements - Specification for type H industrial vacuum cleaners for dusts hazardous to health |
| BS 5543-1978 | 真空技術-圖形符號 | Vacuum technology - graphical symbols |
| BS 6134-1992 | 壓力和真空開關規范 | Specification for pressure and vacuum switches |
| BS 6280-1982 | 用水裝置真空試驗方法(后虹吸作用) | Method of vacuum (backsiphonage) test for water-using appliances |
| BS 998-1990 | 食用真空鹽規范 | Specification for vacuum salt for food use |
| BS DD ENV 737-6-2003 | 醫用氣體管道系統.壓縮醫用氣體終端設備和真空終端設備用探針的尺寸和定位 | Medical gas pipeline systems - Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| BS EN 1012-1-1997 | 壓縮機和真空泵.安全性要求.壓縮機 | Compressors and vacuum pumps - Safety requirements - Compressors |
| BS EN 1012-2-1997 | 壓縮機和真空泵.安全性要求.真空泵 | Compressors and vacuum pumps - Safety requirements - Vacuum pumps |
| BS EN 1091-1997 | 建筑物外真空排水系統 | Vacuum sewerage systems outside buildings |
| BS EN 1123-3-2004 | 污水系統用帶插接套的縱向焊接熱浸鍍鋅鋼管及配件.真空排水系統以及造船用排水系統的尺寸和特殊要求 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| BS EN 1124-4-2005 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.真空排水系統和船上排水系統用部件 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| BS EN 12109-1999 | 建筑物內真空排水道系統 | Vacuum drainage systems inside buildings |
| BS EN 12294-2000 | 塑料管道系統.熱水和冷水系統.真空滲漏性試驗方法 | Plastic piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
| BS EN 1251-1-2000 | 低溫容器.不超過1000升容積的可運輸?shù)恼婵崭魺崛萜?基本要求 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Fundamental requirements |
| BS EN 1251-2-2000 | 低溫容器.不超過1000升容積的可運輸?shù)恼婵崭魺崛萜?設計、制造、檢驗和試驗 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Design, fabrication, inspection and testing |
| BS EN 1251-3-2000 | 低溫容器.不超過1000升容積的可運輸?shù)恼婵崭魺崛萜?使用要求 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Operational requirements |
| BS EN 12546-1-2000 | 與食品接觸的材料和器具.家用保溫容器.真空器皿、保溫瓶和保溫壺規范 | Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for vacuum ware, insulated flasks and jugs |
| BS EN 12596-2007 | 瀝青和瀝青粘合劑.真空毛細管測定動力粘度 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| BS EN 13160-2-2003 | 檢漏系統.壓力和真空系統 | Leak detection systems - Pressure and vacuum systems |
| BS EN 13348-2001 | 銅和銅合金.醫用氣體或真空用無縫圓銅管 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| BS EN 13458-1-2002 | 低溫容器.靜態真空絕緣容器.基本要求 | Cryogenic vessels - Static vacuum insulated vessels - Fundamental requirements |
| BS EN 13458-2-2002 | 低溫容器.靜止的真空絕緣容器.設計、制造、檢驗和試驗 | Cryogenic vessels - Static vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 13458-3-2003 | 低溫容器.靜態真空絕緣容器.操作要求 | Cryogenic vessels - Static vacuum insulated vessels - Operational requirements |
| BS EN 13530-1-2002 | 低溫容器.大型可運輸真空隔熱容器.功能要求 | Cryogenic vessels - Large transportable vacuum insulated vessels - Fundamental requirements |
| BS EN 13530-2-2002 | 低溫容器.大型可運輸真空隔熱容器.設計、制造、檢驗和測試 | Cryogenic vessels - Large transportable vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 13530-3-2002 | 低溫容器.大型可運輸真空隔熱容器.操作要求 | Cryogenic vessels - Large transportable vacuum insulated vessels - Operational requirements |
| BS EN 13604-2002 | 銅和銅合金.電子管、半導體器件和真空設備用高電導率銅的制品 | Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
| BS EN 14091-2002 | 航天產品保證.航天材料篩選的熱真空除氣試驗 | Space product assurance - Thermal vacuum outgassing test for the screening of space materials |
| BS EN 14197-1-2003 | 低溫容器.靜態非真空絕緣容器.基本要求 | Cryogenic vessels - Static non-vacuum insulated vessels - Fundamental requirements |
| BS EN 14197-2-2003 | 低溫容器.靜態非真空絕緣容器.設計、制造、檢查和試驗 | Cryogenic vessels - Static non-vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 14197-3-2004 | 低溫容器.靜態非真空絕緣容器.操作要求 | Cryogenic vessels - Static non-vacuum insulated vessels - Operational requirements |
| BS EN 14398-1-2003 | 低溫容器.大型可運輸?shù)姆钦婵战^緣容器.基本要求 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Fundamental requirements |
| BS EN 14398-2-2003 | 低溫容器.大型可運輸?shù)姆钦婵战^緣容器.設計、制造、檢查和試驗 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 14398-3-2003 | 低溫容器.大型可運輸?shù)姆钦婵战^緣容器.操作要求 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Operational requirements |
| BS EN 14451-2005 | 防飲用水回流污染的裝置.直通反真空閥DN 8至DN 80. A型D系列 | Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A |
| BS EN 14595-2005 | 危險物品運輸罐.罐的輔助設備.壓力和真空通氣口 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent |
| BS EN 3475-409-2002 | 航空航天系列.飛行器用電纜.試驗方法.真空老化試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing |
| BS EN 3531-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型鋼.真空感應熔煉和真空電弧再熔煉.固溶處理和沉淀處理.薄板材和 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1750 MPa Rm 2000 MPa |
| BS EN 3532-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型鋼.真空感應熔煉和真空電弧再熔煉.固溶處理和沉淀處理.厚板材.6m | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm $3Q a 40 mm - 1750 MPa Rm 2000 MPa |
| BS EN 60312-1998 | 家用真空吸塵器.性能測量方法 | Vacuum cleaners for household use - Methods of measuring the performance |
| BS EN 60335-2-2-2003 | 家用和類似用途電器.安全.真空吸塵器和吸水清潔器的特殊要求 | Household and similar electrical appliances - Safety - Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| BS EN 60335-2-69-2003 | 家用和類似用途電器的安全規范.工業和商業用濕式和干式真空吸塵器(包括電動刷)的特殊要求 | Specification for safety of household and similar electrical appliances - Particular requirements - Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use |
| BS EN 60704-2-1-2001 | 測定家用和類似用途電器氣載噪聲排放試驗規程.專門要求.真空吸塵器專門要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Particular requirements for vacuum cleaners |
| BS EN 60704-2-2-1995 | 家用和類似電器氣載噪聲測試規程.真空吸塵器專門要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Forced draught convection heaters |
| BS EN 737-1-1998 | 醫療氣體管道系統.壓縮醫療氣體用和真空用終端設備 | Medical gas pipeline systems - Terminal units for compressed medical gases and vacuum |
| BS EN 737-3-2000 | 醫療用氣體管道系統.壓縮醫療氣體和真空管道 | Medical gas pipeline systems - Pipelines for compressed medical gases and vacuum |
| BS EN 993-17-1999 | 成形密實耐火制品的試驗方法.真空汞法對顆粒狀材料體積密度的測定 | Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum |
| BS EN 993-18-2002 | 成形致密耐火制品的試驗方法.真空汞法測定顆粒狀材料體積密度 | Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum |
| BS EN ISO 10079-3-2000 | 醫療吸引設備.真空或壓力吸引設備 | Medical suction equipment - Suction equipment powered from a vacuum or pressure source |
| BS EN ISO 13710-2004 | 石油、石化和天然氣工業.往復式變?nèi)菡婵毡? | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps |
| BS EN ISO 15364-2000 | 船舶與海上技術.散貨船真空/壓力閥 | Ships and marine technology - Pressure/vacuum valves for cargo tanks |
| BS EN ISO 15749-3-2004 | 船舶和海上技術.船舶和海上結構物的排水系統.真空系統用衛生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, drain piping for vacuum system |
| BS EN ISO 1741-1995 | 葡萄糖.干燥處理重量損失測定.真空法 | Dextrose - Determination of loss in mass on drying - Vacuum oven method |
| BS EN ISO 2151-2004 | 聲學.壓縮機和真空泵的噪聲試驗規范.工程法(2級) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
| BS EN ISO 7396-1-2007 | 醫用氣體管道系統.壓縮醫用氣體和真空用管道系統 | Medical gas pipeline systems - Pipeline systems for compressed medical gases and vacuum |
| BS EN ISO 9100-1-2005 | 玻璃容器.真空凸緣瓶口.總則 | Glass containers - Vacuum lug finishes - General |
| BS EN ISO 9100-10-2005 | 玻璃容器.真空凸緣瓶口.普通規格77 | Glass containers - Vacuum lug finishes - 77 regular |
| BS EN ISO 9100-11-2005 | 玻璃容器.真空凸緣瓶口.普通規格82 | Glass containers - Vacuum lug finishes - 82 regular |
| BS EN ISO 9100-12-2005 | 玻璃容器.真空凸緣瓶口.普通規格89 | Glass containers - Vacuum lug finishes - 89 regular |
| BS EN ISO 9100-13-2007 | 玻璃容器.真空凸緣瓶口.普通規格100 | Glass containers - Vacuum lug finishes - 100 regular |
| BS EN ISO 9100-14-2007 | 玻璃容器.真空凸緣瓶口.普通規格100 | Glass containers - Vacuum lug finishes - 110 regular |
| BS EN ISO 9100-2-2006 | 玻璃容器.真空凸緣瓶口.中型33 | Glass containers - Vacuum lug finishes - 33 medium |
| BS EN ISO 9100-3-2006 | 玻璃容器.真空凸緣瓶口.普通規格38 | Glass containers - Vacuum lug finishes - 38 regular |
| BS EN ISO 9100-4-2006 | 玻璃容器.真空凸緣瓶口.中型38 | Glass containers - Vacuum lug finishes - 38 medium |
| BS EN ISO 9100-5-2005 | 玻璃容器.真空凸緣瓶口.普通規格43和48 | Glass containers - Vacuum lug finishes - 43 and 48 regular |
| BS EN ISO 9100-6-2005 | 玻璃容器.真空凸緣瓶口.普通規格53和58 | Glass containers - Vacuum lug finishes - 53 and 58 regular |
| BS EN ISO 9100-7-2005 | 玻璃容器.真空凸緣瓶口.深度58 | Glass containers - Vacuum lug finishes - 58 deep |
| BS EN ISO 9100-8-2005 | 玻璃容器.真空凸緣瓶口.普通規格63、66和70 | Glass containers - Vacuum lug finishes - 63, 66 and 70 regular |
| BS EN ISO 9100-9-2005 | 玻璃容器.真空凸緣瓶口.深度63、66和70 | Glass containers - Vacuum lug finishes - 63, 66 and 70 deep |
| BS ISO 10086-2-2004 | 煤.選煤用絮凝劑評價方法.旋轉真空過濾設備中作為助濾劑的絮凝劑 | Coal - Methods for evaluating flocculants for use in coal preparation - Flocculants as filter aids in rotary vacuum filtration systems |
| BS ISO 11424-1997 | 內燃機氣動系統和真空系統用橡膠軟管和導管.規范 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| BS ISO 15364-2000 | 船舶技術.貨槽用壓力/真空閥 | Ships and marine technology. Pressure/vacuum valves for cargo tanks |
| BS ISO 20421-1-2006 | 低溫容器.大型可運輸真空隔熱容器.設計、制作、檢測和試驗 | Cryogenic vessels - Large transportable vacuum-insulated vessels - Design, fabrication, inspection and testing |
| BS ISO 21358-2007 | 真空技術.直角閥.氣動傳動裝置尺寸和接口 | Vacuum technology - Right-angle valve - Dimensions and interfaces for pneumatic actuator |
| BS ISO 21360-2007 | 真空技術.測量真空泵性能的標準方法.一般描述 | Vacuum technology - Standard methods for measuring vacuum-pump performance - General description |
| BS ISO 4409-2007 | 液壓流體傳動.變?nèi)菡婵毡谩ⅠR達和整體傳動裝置.測試和呈現基本穩態態性能的方法 | Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance |
| BS ISO 9803-1-2007 | 真空技術.管道配件的安裝尺寸.非刀口法蘭型 | Vacuum technology - Mounting dimensions of pipeline fittings - Non knife-edge flange type |
| BS ISO 9803-2-2007 | 真空技術.管道配件的安裝尺寸.刀口法蘭型 | Vacuum technology - Mounting dimensions of pipeline fittings - Knife-edge flange type |
| BS PAS 60-3-2004 | 含石棉材料的受控清除設備.H類真空吸塵器的操作、清潔和保養.實施規程 | Equipment used in the controlled removal of asbestos-containing materials - Operation, cleaning and maintenance of class H vacuum cleaners - Code of practice |
| BS S 138-1967 | 3%鉻-鉬-釩鋼規范(真空重熔-空氣淬火)[157公斤力/平方毫米(100噸力/平方英寸)];限定等圓斷面30毫米(9/8英寸 | Specification for 3 per cent chromium-molybdenum-vanadium steel (vacuum remelted - air hardening) (157 kgf/mm2 (100 tonf/in2): limiting ruling section 30 mm (11/8 in)) |
| BS S 155-1976 | 鎳-硅-鉻-鉬-釩鋼(真空電弧重熔)坯、棒材、鍛件及零件規范(1900-2100MPa;限定控制剖面75mm) | Specification for nickel-silicon-chromium-molybdenum-vanadium steel (vacuum arc remelted) billets, bars, forgings and parts (1900-2100 MPa: limiting ruling section 75 mm) |
| BS S 156-1976 | 4%鎳-鉻-鉬表面硬化鋼(真空電弧重熔)坯、棒材、鍛件及零件規范(1320-1520MPa) | Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa) |
| BS S 162-1990 | 鍛坯、鍛件、棒材和零件用18%鎳-鈷-鉬馬氏體時效鋼(1800MPa:雙倍真空熔化)規范 | Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted) |
| 編號 | 中文名稱 | 英文名稱 |