編號 | 中文名稱 日本語標題 |
英文名稱 |
---|---|---|
JIS B2290-1998 | 真空技術.法蘭尺寸 真空裝置用フランジ |
Vacuum technology -- Flange dimensions |
JIS B2293-2000 | 真空技術.管道配件.裝配尺寸 真空配管継手の取付け寸法 |
Vacuum technology -- Pipeline fittings -- Mounting dimensions |
JIS B8316-1-1999 | 容積真空泵.性能特性的測定.第1部分:容積流量的測定(泵速) 容積移送式真空ポンプ ― 性能試験方法 ― 第1部:體積流量(排気速度)の測定 |
Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed) |
JIS B8316-2-1999 | 容積真空泵.性能特性的測定.第2部分:極限壓力的測定 容積移送式真空ポンプ ― 性能試験方法 ― 第2部:到達圧力の測定 |
Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure |
JIS B8317-1-1999 | 蒸氣真空泵.性能特性的測定.第1部分:容積流量的測定(泵速) 蒸気噴射真空ポンプ ― 性能試験方法 ― 第1部:體積流量(排気速度)の測定 |
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed) |
JIS B8317-2-1999 | 蒸氣真空泵.性能特性測量.第2部分:臨界托持壓力的測量 蒸気噴射真空ポンプ ― 性能試験方法 ― 第2部:臨界背圧の測定 |
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure |
JIS B8323-2003 | 水環真空泵 水封式真空ポンプ |
Water ring vacuum pumps |
JIS B8365-1988 | 夾緊型真空聯接器的尺寸 真空裝置用クランプ形継手の形狀及び寸法 |
Dimensions of clamped-type vacuum couplings |
JIS B8417-2000 | 真空式熱水器 真空式溫水発生機 |
Vacuum type hot water generator |
JIS C9108-2007 | 電動真空吸塵器 電気掃除機 |
Electric vacuum cleaners |
JIS C9335-2-2-2004 | 家用和類似用途電氣設備的安全.第2-2部分:真空吸塵器和水吸清潔設備的特殊要求 家庭用及びこれに類する電気機器の安全性-第2-2部:真空掃除機及び吸水式掃除機の個別要求事項 |
Household and similar electrical appliances -- Safety -- Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
JIS C9335-2-100-2007 | 家用和類似電器.安全.第2-100部分:花園用手持式電動真空鼓風機和真空鼓風機的特殊要求 家庭用及びこれに類する電気機器の安全性―第2-100部:手持形のガーデンブロワ,バキューム及びブロワバキュームの個別要求事項 |
Household and similar electrical appliances -- Safety -- Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
JIS C9802-1999 | 家用和類似用途真空吸塵器性能的測定方法 家庭用電気掃除機の性能測定方法 |
Methods of measurement of performance of vacuum cleaners for household and similar use |
JIS D2607-1999 | 汽車部件.真空制動橡膠軟管 自動車部品―バキュームブレーキゴムホースアセンブリ |
Automotive parts -- Vacuum brake rubber hose |
JIS D5814-1988 | 汽車用真空壓力開關 自動車用バキュームスイッチ |
Vacuum pressure switches for automobiles |
JIS K5101-1-5-2004 | 顏料試驗方法.第1部分:分散特性評估的分散方法.第5節:真空自動研磨機 顔料試験方法-第1部:分散性評価のための分散方法-第5節:フーバーマラー |
Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 5: A Hoover automatic muller |
JIS S3200-5-1997 | 供水服務設備.用真空壓力法破壞測試方法 水道用器具 ― 負圧破壊性能試験方法 |
Equipment for water supply service -- Test methods of destruction by vacuum pressure |
JIS T3233-2005 | 靜脈血樣采集用一次性真空容器 真空採血管 |
Evacuated single-use containers for venous blood specimen collection |
JIS Z3268-1998 | 真空用銅焊貴金屬焊料 真空用貴金屬ろう |
Precious brazing filler metals for vacuum service |
JIS Z8126-1-1999 | 真空技術.詞匯.第1部分:一般術語 真空技術 ― 用語 ― 第1部:一般用語 |
Vacuum technology -- Vocabulary -- Part 1: General terms |
JIS Z8126-2-1999 | 真空技術.詞匯.第2部分:真空泵和相關術語 真空技術 ― 用語 ― 第2部:真空ポンプ及び関連用語 |
Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms |
JIS Z8126-3-1999 | 真空技術.詞匯.第3部分:真空計和相關術語 真空技術 ― 用語 ― 第3部:真空計及び関連用語 |
Vacuum technology -- Vocabulary -- Part 3: Vacuum gauges and related terms |
JIS Z8207-1999 | 真空技術.圖形符號 真空裝置用図記號 |
Vacuum technology -- Graphical symbols |
JIS Z8750-1994 | 真空計校準方法 真空計校正方法 |
Methods of calibration for vacuum gauges |
JIS Z8751-1994 | 通過液體靜壓力壓頭差讀取真空計的方法 液柱差を使う真空計による真空度測定方法 |
Reading methods of the vacuum gauges by means of the head difference in the hydrostatic pressure |
JIS Z8752-1989 | 用熱陰極和冷陰極電離真空規測量低壓的方法 熱陰極及び冷陰極電離真空計による圧力測定方法 |
Measuring methods of low pressures by hot cathode and cold cathode ionization gauges |
JIS Z8753-1989 | 用熱傳導真空計測量低壓的方法 熱伝導真空計による圧力測定方法 |
Measuring methods of low pressures by thermal conductivity gauge |
JIS Z8754-1999 | 真空技術.質譜型泄漏檢測儀的校正 真空技術 ― 質量分析計形リークディテクター校正方法 |
Vacuum technology -- Mass-spectrometer-type leak-detector calibration |
編號 | 中文名稱 日本語標題 |
英文名稱 |