| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 10236-2001 | 香料和調味品分析.真空爐干燥法測定辣椒和洋蔥類及干燥蔬菜質量損失 | Analysis of spices and condiments - Determination of loss in mass of capsicum and allium species and of dried vegetables by vacuum oven drying |
| DIN 10304-2-1969 | 葡萄糖漿的水分含量和干物質的測定.真空干燥法 | Determination of moisture content and dry substance of glucose syrup; vacuum oven method |
| DIN 10764-2-2007 | 咖啡和咖啡制品的檢驗.溶解咖啡質量缺失測定.第2部分:真空爐法 | Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 2: Method using vacuum oven (routine method) |
| DIN 12491-1998 | 實驗室玻璃器具.真空干燥器 | Laboratory glassware - Vacuum desiccators |
| DIN 12492-1998 | 實驗室玻璃儀器.帶有真空套管隔離層的儀器 | Laboratory glassware - Instruments with vacuum-jacket insulation |
| DIN 12545-1977 | 玻璃實驗儀器.真空旋塞 | Laboratory glassware; vacuum stopcocks |
| DIN 13260-2-2004 | 醫用供氣系統.第2部分:醫用壓縮氣體和真空終端裝置用探測器和氣體特定連接點的尺寸和位置 | Supply systems for medical gases - Part 2: Dimensions and allocation of probes and gas-specific connection points for terminal units for compressed medical gases and vacuum |
| DIN 14420-2002 | 消防泵.消防離心泵.消防車在安裝真空面和壓力面組件后的試驗要求 | Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle |
| DIN 25630-2-2001 | 鐵路車輛部件術語.衛生設備.第2部分:真空抽水馬桶和洗臉盆 | Terms for railway vehicle parts - Sanitary installation - Part 2: Vacuum toilet and wash basin |
| DIN 28400 Bb.1-1982 | 真空技術.術語和定義.字母順序索引 | Vacuum technology, terms and definitions; alphabetical index |
| DIN 28400-1-1990 | 真空技術.術語和定義.通用術語 | Vacuum technology; terms and definitions; general terms |
| DIN 28400-2-1980 | 真空技術.真空泵的術語和定義 | Vacuum technology; terms and definitions, vacuum pumps |
| DIN 28400-3-1992 | 真空技術.術語和定義.真空計 | Vacuum technology; terms and definitions; vacuum gauges |
| DIN 28400-5-1981 | 真空技術.術語和定義.真空干燥和升華干燥 | Vacuum technology; terms and definitions; vacuum drying and lyophilisation |
| DIN 28400-6-1980 | 真空技術.表面分析技術的術語和定義 | Vacuum technology; terms and definitions, surface analysis techniques |
| DIN 28400-7-1978 | 真空技術.第7部分:真空冶金學術語和定義 | Vakuum technology; terms and definitions, vacuum metallurgie |
| DIN 28400-8-1997 | 真空技術.術語定義.第8部分:真空系統.部件和附件 | Vacuum technology - Terms and definitions - Part 8: Vacuum systems, components and accessories |
| DIN 28401-1976 | 真空技術.圖形符號.綜述 | Vacuum technology; graphical symbols, summary |
| DIN 28402-1976 | 真空技術.參數、符號、單位、綜述 | Vacuum technology; quantities, symbols, units, summary |
| DIN 28403-1986 | 真空技術.快速松脫離合器.對殼式聯軸節 | Vacuum technology; quick release couplings; clamped type couplings |
| DIN 28404-1986 | 真空技術.法蘭.尺寸 | Vacuum technology; flanges; dimensions |
| DIN 28410-1968 | 真空技術.質譜分壓量規.定義、特性、工作條件 | Vacuum Technology; Mass Spectrometer Partial Pressure Gauges; Definitions, Characteristics, Operating Conditions |
| DIN 28411-1976 | 真空技術.質譜儀式檢漏器的驗收規范.術語 | Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms |
| DIN 28416-1976 | 真空技術.10(-3)至10(-7)mbar范圍內真空計的校準.一般方法:通過連續不斷的流動降低壓力 | Vaccum technology; calibration of vacuum gauges within the range of 10<(hoch)-3> to 10<(hoch)-7> mbar, general method: pressure reduction by continuous flow |
| DIN 28417-1976 | 真空技術.在恒定壓力下用容積法測量抽氣量 | Vacuum technology; measurement of throughput by the volumetric method at constant pressure |
| DIN 28418-1-1976 | 真空技術.通過直接與標準真空規的比較對真空計校準的標準方法. | Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge |
| DIN 28418-2-1978 | 真空技術.用參比測量儀直接比較校準真空計的標準方法.第2部分:電離真空計 | Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge |
| DIN 28418-3-1980 | 真空技術.通過與標準真空規的直接比較校準真空計的標準方法.熱導真空計 | Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge, thermal conductivity gauges |
| DIN 28426-1-1983 | 真空技術.近似真空和中等真空范圍用旋轉柱塞真空泵、葉片式旋轉真空泵和旋轉式活塞真空泵驗收規范 | Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum |
| DIN 28426-2-1976 | 真空技術.中等級真空范圍用羅茨真空泵的驗收規范 | Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum |
| DIN 28427-1983 | 真空技術.流體蒸氣壓低于1mbar的擴散泵和蒸氣噴射真空泵的驗收規范 | Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar |
| DIN 28428-1978 | 真空技術.渦輪分子泵的驗收規則 | Vacuum technology; acceptance specifications for turbomolecular pumps |
| DIN 28429-2003 | 真空技術.濺射離子泵驗收規范 | Vacuum technology - Acceptance specifications for getter ion pumps |
| DIN 28430-1984 | 真空技術.以蒸汽作為驅動介質的蒸汽噴射真空泵和蒸汽噴射壓縮機的測量規則 | Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid |
| DIN 28431-1987 | 真空技術.液體環式真空泵的驗收規范 | Vacuum technology; acceptance specifications for liquid ring vacuum pumps |
| DIN 28432-1996 | 真空技術.膜片真空泵驗收規范 | Vacuum technology - Acceptance specifications for diaphragm vacuum pumps |
| DIN 44402-14-1971 | 電子管電氣性能測試.第14部分:高真空電子管加熱陰極的放射電流的測試方法 | Measurements of electrical properties of electronic tubes; methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves |
| DIN 44402-16-1972 | 電子管和真空管的電氣性能測量.第16部分:亂真電極電流和有害電極電流的測量方法 | Measurements of the electrical properties of electronic tubes and valves; methods of measurement of spurious and unwanted electrode currents |
| DIN 44402-7-1973 | 電子管和真空管的電氣性能測量.第7部分:咝咝聲和交流聲的測量方法 | Measurements of the electrical properties of electronic tubes and valves; methods of measuring hiss and hum |
| DIN 51935-1993 | 炭素材料試驗.用空氣作實驗氣體的真空衰減法測定透氣系數.固體材料 | Testing of carbon materials; determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas; solid matters |
| DIN 58739-1-2002 | 光學加工.光學加工工件夾具.第1部分:真空夾頭 | Production in optical engineering - Workpiece receptions for optics - Part 1: Vacuum chucks |
| DIN 6618-2-1989 | 地上存儲易燃和不易燃水污染液體的帶真空基滲漏檢測系統雙壁立式鋼儲罐 | Vertical double-wall steel tanks with vacuum-based leak detection system, for the above ground storage of flammable and non-flammable water polluting liquids |
| DIN EN 1012-1-1996 | 壓縮機和真空泵.安全性要求.第1部分:壓縮機 | Compressors and vacuum pumps, safety requirements - Part 1: Compressors; German version EN 1012-1:1996 |
| DIN EN 1012-2-1996 | 壓縮機和真空泵.安全性要求.第2部分:真空泵 | Compressors and vacuum pumps, safety requirements - Part 2: Vacuum pumps; German version EN 1012-2:1996 |
| DIN EN 1091-1997 | 建筑物外真空排污系統 | Vacuum sewerage systems outside buildings; German version EN 1091:1996 |
| DIN EN 1123-3-2005 | 廢水系統用帶插接套的長焊縫焊接熱浸鍍鋅鋼管制管道和管件.第3部分:真空排水系統和船上排水系統的尺寸和特 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004 |
| DIN EN 1124-4-2005 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.第4部分:真空排水系統和船用排水系統用元件 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2005 |
| DIN EN 12109-1999 | 建筑物內的真空排水系統 | Vacuum drainage systems inside buildings; German version EN 12109:1999 |
| DIN EN 12294-1999 | 塑料管道系統.熱水和冷水系統.真空密封性的檢驗方法 | Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999 |
| DIN EN 1251-1-2000 | 低溫容器.容量不超過1000升的可移動的真空絕緣容器.第1部分:基本要求.德文版本EN 1251-1:2000 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000 |
| DIN EN 1251-2 Berichtigung 1-2007 | 低溫容器.容積≤1000L的可運輸真空隔熱容器.第2部分:設計、制造、檢驗和測試.DIN EN 1251-2-2000 技術勘誤 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000, Corrigenda to DIN EN 1251-2:2000-03; German version EN 1251-2:2000/AC:2006 |
| DIN EN 1251-2-2000 | 低溫容器.容量不超過1000升的可移動的真空絕緣容器.第2部分:設計,制造,檢驗和試驗.德文版本EN1251-2-2000 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000 |
| DIN EN 1251-3-2000 | 低溫容器.容量不超過1000升的可移動的真空絕緣容器.第3部分:操作要求.德文版本EN1251-3-2000 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; German version EN 1251-3:2000 |
| DIN EN 12546-1 Berichtigung 1-2005 | 與食品接觸的材料和物品.家用保溫容器.第1部分:真空器皿、保溫瓶和保溫壺規范 | Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; German version EN 12546-1:2000, Corrigenda to DIN EN 12546-1:2000-09; German version EN 12546-1:2000/AC:2005 |
| DIN EN 12546-1-2000 | 與食品接觸的材料和物品.家用保溫容器.第1部分:真空器皿、保溫瓶和保溫壺規范 | Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; German version EN 12546-1:2000 |
| DIN EN 12596-2007 | 瀝青和瀝青粘合劑.用真空毛細管測定動態粘滯度 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary; German version EN 12596:2007 |
| DIN EN 13160-2-2003 | 檢漏系統.第2部分:壓力和真空系統 | Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003 |
| DIN EN 13348-2005 | 銅和銅合金.醫用氣體或真空用無縫圓形銅管 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum; German version EN 13348:2001 + A1:2005 |
| DIN EN 13458-1-2002 | 冷凍容器.靜態真空絕緣容器.第1部分:基本要求; 德文版本 EN 13458-1:2002 | Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 13458-1:2002 |
| DIN EN 13458-2 Berichtigung 1-2007 | 低溫容器.靜壓真空絕緣容器.第2部分:設計、制造、檢驗和測試.DIN EN 13458-2-2003技術勘誤 | Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002, Corrigenda to DIN EN 13458-2:2003-02; German version EN 13458-2:2002/AC:2006 |
| DIN EN 13458-2-2003 | 低溫容器.靜壓真空絕緣容器.第2部分:設計、制造、檢驗和測試 | Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002 |
| DIN EN 13458-3-2005 | 低溫容器.靜態真空絕熱容器.第3部分:操作要求 | Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements; German version EN 13458-3:2003 + A1:2005 |
| DIN EN 13530-1-2002 | 低溫容器.大體積可運輸?shù)恼婵战^緣容器.第1部分:基本要求; 德文版本 EN 13530-1:2002 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 13530-1:2002 |
| DIN EN 13530-2 Berichtigung 1-2007 | 低溫容器.大型可運輸真空絕緣容器.第2部分:設計、制造、檢驗和測試.DIN EN 13530-2-2003技術勘誤 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002, Corrigenda to DIN EN 13530-2:2003-01; German version EN 13530-2:2002/AC:2006 |
| DIN EN 13530-2-2003 | 低溫容器.大容量可運輸真空絕緣容器.第2部分:設計、制造、檢驗和試驗 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002 |
| DIN EN 13530-2/A1-2004 | 低溫容器.大體積、可運輸、真空絕緣容器.第2部分:設計、制作、檢查和試驗 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002/A1:2004 |
| DIN EN 13530-3-2005 | 低溫容器.大型可運輸真空絕緣容器.第3部分:操作要求 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements; German version EN 13530-3:2002 + A1:2005 |
| DIN EN 13604-2002 | 銅和銅合金.電子管、半導體器件和真空設施用高電導率銅制品 | Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications; German version EN 13604:2002 |
| DIN EN 14091-2003 | 航空航天.航天產品保證.航天材料熱真空除氣篩選試驗 | Aerospace - Space product assurance - Thermal vacuum outgassing test for the screening of space materials; German and English version EN 14091:2002 |
| DIN EN 14197-1-2003 | 低溫容器.靜壓非真空絕熱容器.第1部分:基本要求 | Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 14197-1:2003 |
| DIN EN 14197-2 Berichtigung 1-2007 | 低溫容器.靜態非真空絕緣容器.第2部分:設計、制造、檢驗和測試.DIN EN 14197-2-2006技術勘誤 | Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 14197-2:2003 + A1:2006, Corrigenda to DIN EN 14197-2:2006-11; German version EN 14197-2:2003/AC:2006 |
| DIN EN 14197-2-2006 | 低溫容器.靜壓非真空絕熱容器.第2部分:設計、生產、檢查和試驗(包括修改件A1-2006) | Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing (includes Amendment A1:2006); English version of DIN EN 14197-2:2006-11 |
| DIN EN 14197-3-2005 | 低溫容器.靜壓非真空絕熱容器.第3部分:操作要求 | Cryogenic vessels - Static non vacuum insulated vessels - Part 3: Operational requirements; German version EN 14197-3:2004 + A1:2005 |
| DIN EN 14398-1-2004 | 低溫容器.大型可運輸?shù)姆钦婵战^緣容器.第1部分:基本要求 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 14398-1:2003 |
| DIN EN 14398-2-2004 | 低溫容器.大型可運輸?shù)姆钦婵战^緣容器.第2部分:設計、制造、檢查和試驗 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 14398-2:2003 |
| DIN EN 14398-2/A1-2007 | 低溫容器.大型可運輸非真空絕緣容器.第2部分:設計、制造、檢查和試驗 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; English version of DIN EN 14398-2/A1:2007-02 |
| DIN EN 14398-3-2005 | 低溫容器.大型可運輸?shù)姆钦婵战^緣容器.第3部分:操作要求 | Cryogenic vessels - Large transportable non vacuum insulated vessels - Part 3: Operational requirements; German version EN 14398-3:2003 + A1:2005 |
| DIN EN 14595-2005 | 危險物品運輸罐.罐的輔助設備.壓力和真空通氣口 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent; German version EN 14595:2005 |
| DIN EN 3359-2007 | 航空航天系列.FE-PM1503(X3CrNiMoAl13-8-2)型鋼.真空感應熔化和自耗電極重熔的軟化鍛坯.a或D≤300mm | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3359:2007 |
| DIN EN 3475-409-2002 | 航空航天系列.航空用電纜.試驗方法.第409部分:真空老化; 德文版本 EN 3475-409:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing; German version EN 3475-409:2002 |
| DIN EN 3531-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型鋼.真空感應熔煉和真空電弧再熔煉.溶解處理和沉淀處理.薄板材和 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1 750 MPa R<(Index)m> 2 000 MPa; German and English version EN 3531:2007 |
| DIN EN 3532-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型鋼.真空感應熔煉和真空電弧再熔煉.溶解處理和沉淀處理.厚板材.6m | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm a 40 mm - 1 750 MPa R<(Index)m> 2 000 MPa; German and English version EN 3532:2007 |
| DIN EN 4461-2007 | 航空航天系列.鋼 FE-PM1506 (X5CrNiMoAI13-8-2).真空感應熔煉和自耗電極再溶煉的.固溶處理和時效處理的.棒 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1 200 MPa; German and English version EN 4461:2007 |
| DIN EN 4462-2007 | 航空航天系列.鋼 FE-PM1506 (X5CrNiMoAI13-8-2).真空感應熔煉和自耗電極再溶煉的.固溶處理和時效處理的.棒 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4662:2007 |
| DIN EN 4463-2007 | 航空航天系列.鋼 FE-PM1506 (X5CrNiMoAI13-8-2).真空感應熔煉和自耗電極再溶煉的.固溶處理和時效處理的.棒 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4463:2007 |
| DIN EN 4464-2007 | 航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀處理.鍛件.a | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4464:2007 |
| DIN EN 4465-2007 | 航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀處理.鍛件.a | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4465:2007 |
| DIN EN 4466-2007 | 航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀處理.鍛件.a | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4466:2007 |
| DIN EN 4467-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀處理.棒材. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4467:2007 |
| DIN EN 4468-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀硬化.棒材. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Bar - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4468:2007 |
| DIN EN 4469-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀硬化.棒材. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Bar - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4469:2007 |
| DIN EN 4470-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀處理.鍛件. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4470:2007 |
| DIN EN 4471-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀硬化.鍛件. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4471:2007 |
| DIN EN 4472-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型鋼.真空感應熔煉和自耗電極再熔煉.溶解處理和沉淀硬化.鍛件. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4472:2007 |
| DIN EN 60312-2005 | 家用真空吸塵器.性能測量方法 | Vacuum cleaners for household use - Methods of measuring the performance (IEC 60312:1998 + A1:2000 + A2:2004); German version EN 60312:1998 + A1:2000 + A2:2004 |
| DIN EN 60335-2-2-2007 | 家用和類似用途電器.安全性.第2-2部分:真空吸塵器和吸水清潔器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2:2002, modified + A1:2004 + A2:2006, modified); German version EN 60335-2-2:2003 + A1:2004 + A2:2006 |
| DIN EN 60335-2-69-2004 | 家用和類似用途電器的安全.第2-69部分:工業和商用帶電動刷的濕式和干式真空吸塵器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002, modified); German version EN 60335-2-69:2003 |
| DIN EN 60335-2-69/A1-2005 | 家用和類似用途電器的安全.第2-69部分:工業和商業用濕式和干式真空吸塵器(包括電動刷)的特殊要求 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002/A1:2004); German version EN 60335-2-69:2003/A1:2004 |
| DIN EN 60704-2-1-2001 | 家用和類似用途電氣設備.氣載噪測試規程.第2-1部分:真空吸塵器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners (IEC 60704-2-1:2000); German version EN 60704-2-1:2001 |
| DIN EN 737-1-1998 | 醫療氣體管道系統.第1部分:醫療壓縮氣體和真空的管端裝置 | Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum; German version EN 737-1:1998 |
| DIN EN 993-17-1999 | 密實成型耐火制品的試驗方法.第17部分:用水銀真空排出法測定顆粒材料的散密度 | Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998 |
| DIN EN 993-18-2002 | 密封成形耐火制品試驗方法.第18部分:用真空濕法測定顆粒物體積密度 | Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002 |
| DIN EN ISO 10079-3-2000 | 醫用吸引設備.第3部分:真空或用壓力驅動的吸引設備 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999); German version EN ISO 10079-3:1999 |
| DIN EN ISO 11140-3-2007 | 衛生保健產品的滅菌.化學指示劑.第3部分:真空滅菌鍋殘余空氣蒸汽滲透試驗用的2級指示劑體系 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007); German version EN ISO 11140-3:2007 |
| DIN EN ISO 11140-4-2007 | 衛生保健產品的滅菌.化學指示劑.第4部分:蒸汽滲透檢測用可代替真空滅菌鍋殘余空氣試驗的指示劑 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007); German version EN ISO 11140-4:2007 |
| DIN EN ISO 13710-2005 | 石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡? | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004); English version EN ISO 13710:2004 |
| DIN EN ISO 15364-2002 | 船舶和航海技術.油輪用壓力/真空閥 (ISO 15364:2000); 德文版本 EN ISO 15364:2001 | Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001 |
| DIN EN ISO 15749-3-2004 | 船舶和海上技術.船舶和海上建筑物排水系統.第3部分:真空系統用衛生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004); German version EN ISO 15749-3:2004 |
| DIN EN ISO 16330-2004 | 往復運動變?nèi)菡婵毡煤捅醚b置.技術要求 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003); German version EN ISO 16330:2003 |
| DIN EN ISO 1741-1994 | 葡萄糖.干燥后質量損失的測定.真空烘箱法 (ISO 1741:1980); 德文版本 EN ISO 1741:1994 | Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980); German version EN ISO 1741:1994 |
| DIN EN ISO 2151-2004 | 聲學.壓縮機和真空泵用噪音試驗規程.工程法(2級) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004); German version EN ISO 2151:2004 |
| DIN EN ISO 7396-1-2007 | 醫用氣體管道系統.第1部分:壓縮醫療氣體和真空用管道系統 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2007); German version EN ISO 7396-1:2007 |
| DIN EN ISO 8028-2000 | 真空噴漆用橡膠和/或塑料軟管組件.規范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000 |
| DIN EN ISO 9100-1-2005 | 玻璃容器.真空凸緣瓶口.第1部分:總則 | Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005); German version EN ISO 9100-1:2005 |
| DIN EN ISO 9100-10-2005 | 玻璃容器.真空凸緣瓶口.第10部分:普通規格77 | Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005); German version EN ISO 9100-10:2005 |
| DIN EN ISO 9100-11-2005 | 玻璃容器.真空凸緣瓶口.第11部分:普通規格82 | Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005); German version EN ISO 9100-11:2005 |
| DIN EN ISO 9100-12-2005 | 玻璃容器.真空凸緣瓶口.第12部分:普通規格89 | Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005); German version EN ISO 9100-12:2005 |
| DIN EN ISO 9100-13-2005 | 玻璃容器.真空凸緣瓶口.第13部分:普通規格100 | Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005); German version EN ISO 9100-13:2005 |
| DIN EN ISO 9100-14-2005 | 玻璃容器.真空凸緣瓶口.第14部分:普通規格110 | Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005); German version EN ISO 9100-14:2005 |
| DIN EN ISO 9100-2-2006 | 玻璃容器.真空凸緣瓶口.第2部分:中型33(ISO 9100-2-2005).德文版本 EN ISO 9100-2-2005 | Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005); German version EN ISO 9100-2:2005 |
| DIN EN ISO 9100-3-2006 | 玻璃容器.真空凸緣瓶口.第3部分:普通規格38 | Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005); German version EN ISO 9100-3:2005 |
| DIN EN ISO 9100-4-2006 | 玻璃容器.真空凸緣瓶口.第4部分:中型38(ISO 9100-4-2005).德文版本 EN ISO 9100-4-2005 | Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005); German version EN ISO 9100-4:2005 |
| DIN EN ISO 9100-5-2005 | 玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 | Glass containers - Vacuum lug finishes - Part 5 :43 and 48 regular (ISO 9100-5:2005); German version EN ISO 9100-5:2005 |
| DIN EN ISO 9100-6-2005 | 玻璃容器.真空凸緣瓶口.第6部分:普通規格53和58 | Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular (ISO 9100-6:2005); German version EN ISO 9100-6:2005 |
| DIN EN ISO 9100-7-2005 | 玻璃容器.真空凸緣瓶口.第7部分:深度為58 | Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005); German version EN ISO 9100-7:2005 |
| DIN EN ISO 9100-8-2005 | 玻璃容器.真空凸緣瓶口.第8部分:普通規格63、66和70 | Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular (ISO 9100-8:2005); German version EN ISO 9100-8:2005 |
| DIN EN ISO 9100-9-2005 | 玻璃容器.真空凸緣瓶口.第9部分:深度為63、66和70 | Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005); German version EN ISO 9100-9:2005 |
| DIN V ENV 737-6-2003 | 醫用氣體管道系統.第6部分:醫用壓縮氣體和真空終端裝置用探針的尺寸和定位 | Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum; German version ENV 737-6:2003 |
| 編號 | 中文名稱 | 英文名稱 |