| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS EN 752-1-1996 | 室外建筑物的排水和污水系統.概述和定義 | Drain and sewer systems outside buildings - Generalities and definitions |
| BS 6297-1983 | 小型污水處理工程和污水池設計及安裝實用規程 | Code of practice for design and installation of small sewage treatment works and cesspools |
| BS EN 598-1995 | 污水工程用球墨鑄鐵管、接頭、配件及其連接件.要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| BS EN 295-6-1996 | 排水管和污水管用陶制管、管件及管接頭.陶制管人孔的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes |
| BS EN 295-7-1996 | 排水管和污水管用陶制管、管件及管接頭.陶制管和管插接接頭的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking |
| BS EN 681-1-1996 | 彈性密封件.水和污水排放設施用管聯接密封件的材料要求.硫化橡膠 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Vulcanized rubber |
| BS EN 1054-1996 | 塑料管道系統.建筑物內糞水和污水排放下水道用熱塑管道系統.連接件的氣密性試驗方法 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
| BS EN 1306-1996 | 內河航運船只.污水排放用連接件 | Inland navigation vessels - Connections for the discharge of waste water |
| BS EN 752-3-1997 | 室外建筑物的排水和污水系統.計劃 | Drain and sewer systems outside buildings - Planning |
| BS EN 752-2-1997 | 室外建筑物的排水和污水系統.性能要求 | Drain and sewer systems outside buildings - Performance requirements |
| BS EN 1671-1997 | 建筑物外壓力污水系統 | Pressure sewerage systems outside buildings |
| BS EN ISO 5667-13-1998 | 水質.采樣.第13部分:生活污水和水處理廠的污泥采樣指南 | Water quality - Sampling - Guidance on sampling of sludges from sewage and water treatment works |
| BS EN 752-5-1998 | 建筑物外的排水和污水系統.修復 | Drain and sewer systems outside buildings - Rehabilitation |
| BS EN 752-6-1998 | 室外建筑物的排水和污水系統.泵抽排裝置 | Drain and sewer systems outside buildings - Pumping installations |
| BS EN 12889-2000 | 排水管和污水管的非挖溝施工和試驗 | Trenchless construction and testing of drains and sewers |
| BS EN 752-4-1998 | 建筑物外的排水和污水系統.水工設計和環境考慮 | Drain and sewer systems outside buildings - Hydraulic design and environmental considerations |
| BS EN 1401-1-1998 | 不承壓地下雨水管和污水管用塑料管道系統.未增塑聚氯乙烯(PVC-U).管道、配件和系統規范 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system |
| BS EN 752-7-1998 | 室外建筑物的排水和污水系統.維修和使用 | Drain and sewer systems outside buildings - Maintenance and operations |
| BS EN 1123-1-1999 | 污水系統用插接管的縱向焊接熱浸鍍鋅鋼管及配件.要求、試驗和質量控制 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
| BS EN 1124-1-1999 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.要求、測試和質量控制 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
| BS EN 1124-3-1999 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.系統X、尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions |
| BS EN 1293-1999 | 氣壓排氣管、排水管和污水道中使用部件的一般要求 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 773-1999 | 液壓壓力排氣管、排水管和污水管道中使用部件的一般要求 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS EN 1123-2-1999 | 污水系統用帶套管和孔座的縱向焊接的熱浸鍍鋅鋼管和配件.尺寸 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions |
| BS EN 12255-11-2001 | 污水處理廠.要求的一般數據 | Wastewater treatment plants - General data required |
| BS EN 1989-2000 | 熱塑管道系統.地下埋裝的非承壓污水設施用連接件.通過對密封壓力的估計對帶熱塑彈力密封件的連接件的長期密 | Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
| BS EN 12255-3-2000 | 污水處理廠.預處理 | Wastewater treatment plants - Preliminary treatment |
| BS EN 12255-1-2002 | 污水處理工廠.一般建造原則 | Wastewater treatment plants - General construction principles |
| BS EN 13566-3-2003 | 地下無壓排水管網和污水管網翻新用塑料管道系統.緊密配合管加襯 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with close fit pipes |
| BS EN 12255-4-2002 | 污水處理廠.初次澄清 | Wastewater treatment plants - Primary settlement |
| BS EN 13566-1-2003 | 地下無壓排水管網和污水管網翻新用塑料管道系統.總則 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - General |
| BS EN 13566-4-2003 | 地下無壓排水管網和污水管網翻新用塑料管道系統.現場加工管襯里 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes |
| BS DD ENV 1852-2-2001 | 非承壓地下排放和污水用塑料管道系統.聚丙烯（PP).符合性評定指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity |
| BS EN 12255-9-2002 | 污水處理廠.氣味控制和通風 | Wastewater treatment plants - Odour control and ventilation |
| BS EN 12255-6-2002 | 污水處理廠.活性污泥處理法 | Wastewater treatment plants - Activated sludge processes |
| BS EN 12255-7-2002 | 污水處理廠.生物固定薄膜反應器 | Wastewater treatment plants - Biological fixed-film reactors |
| BS DD ENV 1401-2-2001 | 非承壓地下排放和污水用塑料管道系統.未增塑的聚氯乙烯(PVC-U).符合性評定指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for assessment of conformity |
| BS DD ENV 13801-2001 | 建筑物內污物污水排放(低溫和高溫)用塑料管道系統.熱塑管.推薦的安裝實施規程 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation |
| BS DD ENV 1566-2-2001 | 建筑物內污物污水排放(高、低溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).符合性評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Guidance for the assessment of conformity |
| BS DD ENV 1455-2-2001 | 建筑物內污物污水排放(高、低溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物(ABS).符合性評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene- styrene (ABS) - Guidance for the assessment of conformity |
| BS DD ENV 1519-2-2001 | 建筑物內污物污水排放(高、低溫)用塑料管道系統.聚乙烯(PE).符合性評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS DD ENV 1329-2-2001 | 建筑內污物污水排放(高、低溫)用塑料管道系統.未增塑的聚氯乙烯(PVC-U).符合性評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity |
| BS DD ENV 1401-3-2001 | 非承壓地下排放和污水用塑料管道系統.未增塑的聚氯乙烯(PVC-U).安裝指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for installation |
| BS DD ENV 1451-2-2001 | 建筑物內污物和污水排放(高、低溫)用塑料管道系統.聚丙烯(PP).符合性評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Guidance for the assessment of conformity |
| BS ISO 9631-2004 | 橡膠密封件.溫度為110℃及以下的熱水供給、排水和污水管道用連接環.材料規范 | Rubber seals - Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C - Specifications for the material |
| BS EN ISO 15083-2003 | 小艇.艙底污水抽吸系統 | Small craft - Bilge-pumping systems |
| BS EN 13508-1-2003 | 建筑物外部排水和污水道系統的條件.一般要求 | Condition of drain and sewer systems outside buildings - General requirements |
| BS EN 13244-2-2003 | 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.管道 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Pipes |
| BS EN 13244-1-2003 | 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.總則 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - General |
| BS EN 12255-15-2003 | 污水處理廠.活性污泥處理廠曝氣池清水中充氧量的測量 | Wastewater treatment plants - Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants |
| BS EN 13244-5-2003 | 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.系統目的的適合性 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fitness for purpose of the system |
| BS EN 13244-4-2003 | 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.閥門 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves |
| BS EN 13244-3-2003 | 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.配件 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fittings |
| BS DD CEN/TS 13244-7-2004 | 排水和污水處理通用地下和地上壓力設備用塑料管道系統.聚乙烯(PE).符合性評定指南 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS EN ISO 15749-4-2004 | 船舶和海上技術.船舶和海上結構物的排水系統.衛生排水和污水處理管 | Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, sewage disposal pipes |
| BS EN 1123-3-2004 | 污水系統用帶插接套的縱向焊接熱浸鍍鋅鋼管及配件.真空排水系統以及造船用排水系統的尺寸和特殊要求 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| BS EN 295-10-2005 | 排水和污水管道用陶土管、配件及管連接件.性能要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Performance requirements |
| BS EN 13508-2-2003 | 建筑物外部排水和污水道系統的條件.目視檢驗編碼系統 | Conditions of drain and sewer systems outside buildings - Visual inspection coding system |
| BS DD CEN/TS 12666-2-2006 | 非承壓地下排放和污水用塑料管道系統.聚乙烯(PE).符合性評定指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS 3495-1972 | 鋁垃圾箱規范 | Specification for aluminium refuse storage containers |
| BS 792-1973 | 低碳鋼垃圾箱規范 | Specification for mild steel dustbins |
| BS 1136-1972 | 低碳鋼垃圾箱規范 | Specification for mild steel refuse storage containers |
| BS 6642-1985 | 一次使用的聚乙烯塑料垃圾袋規范 | Specification for disposable plastics refuse sacks made from polyethylene |
| BS EN 1501-1-1998 | 垃圾收集車及其相關提升裝置.一般要求和安全性要求.后部裝載的垃圾收集車 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Rear-end loaded refuse collection vehicles |
| BS 1703-2005 | 垃圾道和垃圾斗規范 | Refuse chutes and hoppers - Specification |
| 編號 | 中文名稱 | 英文名稱 |
|---|