| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN ISO 5667-13-1997 | 水質 采樣 第13部分：生活污水和水處理廠污水采樣指南 | Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997) |
| EN 1055-1996 | 塑料管道系統 建筑物內糞便和污水排放用熱塑管道系統 抗周期性升溫的試驗方法 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
| EN 1054-1995 | 塑料管道系統 糞便和污水排放用熱塑管道系統 連接件氣密性試驗方法 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
| EN 1401-1-1998 | 非壓力地下雨水管和污水管用塑料管道系統未增塑聚氯乙烯(PVC-U) 管道 第1部分：配件和系統規范 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| ENV 1046-2001 | 塑料管道和導管系統 運輸水或污水用建筑結構外系統 地上和地下安裝用規程 | Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground |
| ENV 1451-2-2001 | 建筑物結構內污物和污水排出(低和高溫)用塑料管道系統 聚丙烯(PP ) 第2部分：合格評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| ENV 1519-2-2001 | 建筑物結構內污物和污水排放(低和高溫)塑料管道系統 聚已烯(PE) 第2部分：合格評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity |
| ENV 1852-2-2000 | 無壓地下排水和污水用塑料管道系統 聚丙烯(PP) 第2部分：合格評定指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| EN 1636-5-1997 | 無壓力排水和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第5部分：針對接頭 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints |
| EN 598-1994 | 污水工程用球墨鑄鐵管、配件、附件和其它接頭 要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods |
| EN 1636-3-1997 | 無壓力排水和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第3部分：管件 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings |
| EN 588-1-1996 | 污水管和排水管用纖維水泥管 第1部分：重力系統用管道、管連接件和管配件 | Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems |
| EN 1989-2000 | 熱塑性管道系統 埋地?zé)o壓污水用接頭 通過估計密封壓力對熱塑彈性塑料(TPE)密封接頭的長時間密封性能的試 | Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
| prEN 14457-2002 | 專門為無溝排放污水設備而設計的部件的一般要求 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
| prEN 13566-2-2002 | 用于修復非壓力排水和污水網的塑料管道系統 第2部分：帶連續管的襯套 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes |
| prEN 1519-5-1994 | 建筑物結構內污物和污水排放(低和高溫)塑料管道系統.聚已烯(PE) 第5部分：針對系統用途的適合性 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
| prEN ISO 15749-2-2001 | 船舶和造船技術 船和海上構筑物上排水系統 第2部分：生活污水排水、排水管道的自流系統 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system (ISO/DIS 15749-2:2001) |
| prEN ISO 15749-1-2001 | 船舶和造船技術 船和海上構筑物上排水系統 第1部分：生活污水排水系統的設計 | Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design (ISO/DIS 15749-1:2001) |
| prEN 1852-5-1995 | 無壓地下排水和污水用塑料管道系統 聚炳烯(PP) 第5部分：對系統配合的適宜性 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 5: Fitness for purpose of the system |
| ENV 13801-2000 | 建筑物中用于糞便和污水排放（低溫和高溫）的塑料管道系統 熱塑性塑料 推薦的安裝規范 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation |
| EN 773-1999 | 液壓排放管、排水管和污水管構件的一般要求 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| EN 12889-2000 | 排水管和污水管非開槽結構和測試 | Trenchless construction and testing of drains and sewers |
| EN 588-2-2001 | 污水管和排水管用纖維水泥管 第2部分：檢修孔和檢查室 | Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers |
| EN 13380-2001 | 建筑物外排水和污水系統組件的清理和修復的一般要求 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| prEN 1519-3-1994 | 建筑物結構內污物和污水排放(低和高溫)塑料管道系統 聚已烯(PE) 第3部分：管件 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 3: Fittings |
| EN 1636-6-1997 | 無壓力排水和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第6部分：安裝實踐 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 6: Practices for installation |
| prEN 1636-2-1996 | 無壓力排水道和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第2部分：帶有撓 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| prEN 1636-1-1996 | 無壓力排水和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第1部分：總則 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General |
| prEN 1636-4-1994 | 無壓力排水和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第4部分：輔助設備 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 4: Ancillary equipment |
| prEN 1451-3-1994 | 建筑物結構內用于污物和污水排放（高/低溫）的塑料管道系統 聚丙烯（PP） 第3部分：管件 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 3: Fittings |
| prEN 1455-3-1994 | 建筑物結構內用于污物和污水排放（高/低溫）的塑料管道系統 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第3部分 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 3: Fittings |
| prEN ISO 15749-4-2001 | 船舶和造船技術 船和海上構筑物上排水系統 第4部分：生活污水排水、污物處理排出管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO/DIS 15749-4:2001) |
| prEN ISO 15749-3-2001 | 船舶和造船技術 船和海上構筑物上排水系統 第3部分：生活污水排水、排水管的真空抽吸系統 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO/DIS 15749-3:2001) |
| prEN 1451-6-1994 | 建筑物結構內用于污物和污水排放（高/低溫）的塑料管道系統 聚丙烯（PP) 第6部分：推薦的安裝實踐 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building - Polypropylene (PP) - Part 6: Recommended practice for installation |
| prEN 1519-6-1995 | 建筑物結構內污物和污水排放(低和高溫)塑料管道系統 聚已烯(PE) 第6部分：推薦的安裝實踐 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 6: Recommanded practice for installation |
| prEN 1455-5-1994 | 建筑物結構內用于污物和污水排放（高/低溫）的塑料管到系統 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第5部分 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 5: Fitness for purpose of the system |
| prEN 1455-6-1994 | 建筑物結構內用于污物和污水排放（高/低溫）的塑料管道系統 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第6部分 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building - Acrylonitrile-butadiene-styrene (ABS) - Part 6: Recommended practice for installation |
| prEN 1566-5-1994 | 建筑物結構內污物和污水排放(低和高溫)用塑料管道系統 氯化已烯(聚氯已烯)(PVC-C) 第5部分：針對系統用途 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system |
| EN 1437-2002 | 塑料管道系統 地下排水和污水用管道系統 耐溫度循環和外部負荷綜合作用的試驗方法 | Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
| EN 13244-1-2002 | 地上和地下給排水和污水壓力系統用塑料管道 聚已烯（PE） 第1部分：總則 | Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
| EN 13244-2-2002 | 地上和地下給排水和污水壓力系統用塑料管道 聚已烯（PE） 第2部分：管道 | Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
| EN 13244-4-2002 | 地上和地下給排水和污水壓力系統用塑料管道 聚已烯（PE） 第4部分：閥門 | Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves |
| EN 13244-5-2002 | 地上和地下給排水和污水壓力系統用塑料管道 聚已烯（PE） 第5部分：系統適用度 | Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
| EN 13244-3-2002 | 地上和地下給排水和污水壓力系統用塑料管道 聚已烯（PE） 第3部分：配件 | Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings |
| EN 13566-1-2002 | 用于修復非壓力排水和污水網的塑料管道系統 第1部分：總則 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| EN 13566-3-2002 | 用于修復非壓力排水和污水網的塑料管道系統 第3部分：帶密裝配管的襯套 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes |
| EN 13566-4-2002 | 用于修復非壓力排水和污水網的塑料管道系統 第4部分：帶現場固化管的襯套 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes |
| EN 1852-1-1997+A1-2001 | 無壓地下排水和污水用塑料管道系統 聚丙烯(PP)、 第一部分：管材、管件及系統規范 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| EN 13598-1-2003 | 非壓力底下排水和污水塑料管道系統 非增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE） 第1部分：包括 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| prEN 13508-1-2003 | 建筑物外排水和污水管系統狀況的確定 第1部分：一般要求 | Condition of drain and sewer systems outside buildings - Part 1: General requirements |
| prEN 13476-1-2002 | 非壓力地下排水和污水熱塑性塑料管道系統 聚氯乙烯（PVC-U）、聚丙烯（PP）)和聚已烯（PE）的結構墻管道系 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for pipes, fittings and the syste |
| EN ISO 9509-1995 | 水質 評價化學藥品和污水對活性污泥中微生物硝化抑制作用的方法 | Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water (ISO 9509:1989) |
| prEN 1451-5-1994 | 建筑物結構內用污物和污水排放（高/低溫）的塑料管道系統 聚丙烯（PP） 第5部分：系統用途的適合性 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 5: Fitness for purpose of the system |
| EN 1501-1-1998 | 垃圾車及其相關提升設備 一般要求和安全要求 第1部分：后部裝載的垃圾車 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles |
| prEN 14414-2002 | 土工合成織物 測定垃圾掩埋應用的耐化學腐蝕用篩選試驗方法 | Geosynthetics - Screening test method for determining chemical resistance for landfill applications |
| prEN 474-11-2001 | 土方機械 安全 第11部分：土地和垃圾掩埋夯土機要求 | Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
| EN 474-11-1998 | 土方機械 安全 第11部分：土地和垃圾掩埋夯土機要求 | Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
| prEN 1501-2-2000 | 垃圾車及其相關提升設備 一般要求和安全要求 第2部分：邊側裝載的垃圾車 | Refuse collection vehicles and their associated lifting device - General requirements and safety requirements - Teil 2: Side loaded refuse collection vehicles |
| 編號 | 中文名稱 | 英文名稱 |
|---|