| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI A224.1-1990
| 鋼門和門框涂底漆的鋼材表面的試驗程序和驗收標準
| Test procedure and acceptance criteria for prime painted steel surfaces for steel doors and frames
|
| ANSI A250.10-1998
| 鋼門和門框的鋼表面底漆的試驗程序和驗收標準
| Steel Surfaces for Steel Doors and Frames, Test Procedure and Acceptance Criteria for Prime Painted
|
| ANSI A250.3-1999
| 工廠用鋼門和門框的鋼表面飾面漆的試驗程序和驗收標準
| Test Procedure and Acceptance Criteria for Factory-Applied Finish Painted Steel Surfaces for Steel Doors and Frames
|
| ANSI A250.4-2001
| 鋼門和五金加強件的物理耐久性的試驗程序和驗收標準
| Test Procedure and Acceptance Criteria for Physical Endurance for Steel Doors and Hardware Reinforcings
|
| ANSI/ASAE S522.1 (ISO 5674-2004)-2005
| 農林用拖拉機和機械.動力輸出軸護罩.強度和磨損試驗及驗收標準
| Tractors and machinery for agricultural and forestry - Guards for power take-off (PTO) drive shafts - Strength and wear tests and acceptance criteria
|
| ANSI/ASME B1.3M-1992
| 英制和米制(UN, UNR,UNJ, M, and MJ)螺紋的尺寸驗收用測量系統
| Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
|
| ANSI/ASTM D585-1997
| 單批紙、紙板、纖維紙板和相關產品的取樣和驗收慣例
| Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Products
|
| ANSI/ASTM E141-1997
| 根據概率取樣結果進行數據驗收的慣例
| Practice for Acceptance of Evidence Based on the Results of Probability Sampling
|
| ANSI/ASTM F1417-1996
| 使用低壓空氣對塑料自流排水管道進行安裝驗收的試驗方法
| Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air
|
| ANSI/ASTM F940-2000
| 海上建筑物及造船用保護性涂料的質量控制驗收檢驗程序的標準操作規程
| Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| ANSI/AWS C2.21M/C 2.21-2003
| 熱噴涂設備驗收檢驗規范
| Specification for Thermal Spray Equipment Acceptance Inspection
|
| ANSI/EIA 276-A-1980
| 電動揚聲器的動態驗收檢驗
| Loudspeakers, Acceptance Testing of Dynamic
|
| ANSI/EIA 555-1988
| 驗證符合規定質量等級（PPM）批量驗收程序
| Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Level (SQL) in PPM
|
| ANSI/EIA 584-1991
| 按連續制造過程的屬性進行檢驗用零驗收數取樣的程序和表格
| Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process
|
| ANSI/EIA 585-1991
| 按隔批屬性進行檢驗用零驗收數取樣的程序和表格
| Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
|
| ANSI/EIA-555-1988
| 驗證符合規定質量水平(SQL)PPM量級的批量驗收程序
| Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Level (SQL) in PPM
|
| ANSI/IEEE C57.106-2002
| 設備絕緣油驗收和維護指南
| Guide for Acceptance and Maintenance of Insulating Oil in Equipment
|
| ANSI/IEEE C57.111-1995
| 硅絕緣液體驗收指南和在變壓器中的維護
| Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers
|
| ANSI/IESNA LM-73-2004
| 使用白熾燈或者高強度放電燈的娛樂照明燈具的光度試驗的IESNA驗收方法
| IESNA Approved Method for Photometric Testing of Entertainment Lighting Luminaires Using Incandescent Filament Lamp or High Intensity Discharge Lamps
|
| ANSI/IPC WHMA-A-620-2002
| 電纜和導線護皮組件的要求和驗收
| Requirements and Acceptance for Cable and Wire Harness Asssemblies
|
| ANSI/NCCLS GP17-A 2-2004
| 臨床實驗室安全.驗收導則
| Clinical Laboratory Safety; Approved Guideline
|
| ANSI/NFPA 140-2004
| 移動圖片和電視制作工作室發聲場所和已驗收的防護設備
| Motion Picture and Television Production Studio Soundstages and Approved Protection Facilities
|
| ANSI/RIA R15.05-3-1992
| 工業機器人和自動控制系統.可靠性驗收試驗.指南
| Industrial Robots and Robot Systems - Reliability Acceptance Testing - Guidelines
|
| ANSI/RVIA UPA-1-2000
| 統一計劃驗收
| Uniform Plan Approval
|
| ANSI/SCTE 25-4-2002
| 混合光纖/同軸電纜室外狀態監視.第4部分:發射機應答器接口驗收試驗用HMS電源
| Hybrid Fiber/Coax Outside Plant Status Monitoring Part 4: HMS Power Supply to Transponder Interface Acceptance Test
|
| ASME N45.2.6-1978
| 核電廠的檢驗,驗收和測試人員的資格鑒定
| (Qualifications of inspection, examination, and testing personnel for nuclear power plants)
|
| ASTM A 802/A 802M-1995
| 鋼鑄件外觀檢驗的表面驗收標準的標準操作規程
| Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
|
| ASTM A 903/A 903M-1999
| 鋼鑄件磁性粒子和液體滲透檢驗的表面驗收標準的標準規范
| Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
|
| ASTM A 997-1998
| 熔模鑄件表面驗收標準外觀檢驗的標準實施規程
| Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
|
| ASTM C 1010-1983
| 核燃料再加工設備的驗收、檢測和操作前試驗
| Acceptance, Checkout and Pre-Operational Testing of a Nuclear Fuels Reprocessing Facility
|
| ASTM C 1103-2003
| 已安裝的預制混凝土污水管線的接頭驗收試驗的標準規程
| Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
|
| ASTM C 1103M-2003
| 已安裝的預制混凝土污水管線的接頭驗收標準規程(米制)
| Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
|
| ASTM C 929-1994
| 奧氏體不銹鋼上用絕熱材料的加工、運輸、海運、貯藏、驗收和應用的標準實施規程
| Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
|
| ASTM C 969-2002
| 安裝的預制混凝土污水管道的表面滲入和滲出的驗收檢驗的標準實施規程
| Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
|
| ASTM C 969M-2002
| 安裝的預制混凝土污水管道的表面滲入和滲出的驗收檢驗的標準實施規程(米制)
| Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
|
| ASTM D 4418-2000
| 燃?xì)廨啓C(jī)用燃料的驗收、貯存和搬運的標準操作規程
| Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
|
| ASTM D 4678-2004
| 橡膠的標準規程.標準物質的制備、試驗、驗收、文獻工作和使用
| Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
|
| ASTM D 585-1997
| 紙張、紙板、纖維板和相關產品的單批取樣和驗收標準實施規程
| Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
|
| ASTM D 6346-1998
| 通過家庭有害廢物處理收集的驗收,隔離和包裝材料的標準指南
| Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
|
| ASTM E 141-1991
| 根據概率取樣結果所得數據驗收的標準實施規范
| Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
|
| ASTM E 2427-2005
| 用美國標準試驗篩的性能測試進行驗收用標準試驗方法
| Standard Test Method for Acceptance by Performance Testing of U.S. Standard Test Sieves |
| ASTM F 1417-1992
| 使用低壓空氣對塑料自流排水管道安裝驗收方法
| Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
|
| ASTM F 2242-2005
| 動力傘降飛行器的生產驗收試驗系統的標準規范
| Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
|
| ASTM F 2356a-2005
| 輕于空氣的輕型運動飛機的產品驗收試驗系統的標準規范
| Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
|
| ASTM F 2447-2005
| 重量轉移控制飛行器的生產驗收試驗程序的標準實施規程
| Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
|
| ASTM F 940-1999
| 海上建筑物及造船用保護性涂料的質量控制驗收檢驗程序的標準操作規程
| Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| 編號 | 中文名稱 | 英文名稱 |
|---|