| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 12266-1-2003
| 工業閥門 閥門試驗 第1部分：壓力試驗、試驗程序和驗收標準、強制要求
| Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria; Mandatory requirements
|
| EN 12266-2-2002
| 工業閥門 閥門試驗 第2部分：試驗、試驗程序和驗收標準 補充要求
| Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements
|
| EN 12484-4-2002
| 灌溉技術 自動草坪灌溉系統 第4部分：驗收和安裝
| Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance
|
| EN 12517-1998
| 焊縫的無損檢驗 焊接接頭放射線檢驗 驗收等級
| Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels
|
| EN 1289-1998+A1-2002
| 焊接的無損檢驗 焊接的熔深試驗 驗收等級
| Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels
|
| EN 1291-1998+A1-2002
| 焊接的無損檢驗 焊接的磁性粒子試驗 驗收等級
| Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels
|
| EN 12952-15-2003
| 水管鍋爐及附屬設備 第15部分：驗收試驗
| Water-tube boilers and auxiliary installations - Part 15: Acceptance tests
|
| EN 12953-11-2003
| 殼式鍋爐 第11部分：驗收試驗
| Shell boilers - Part 11: Acceptance tests
|
| EN 13121-1-2003
| 地上使用的GRP罐和容器 第1部分：原材料 驗收條件和規格條件
| GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
|
| EN 1317-2-1998
| 道路防護系統 第2部分：安全屏障的性能等級、碰撞試驗、驗收標準和試驗方法
| Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers
|
| EN 1317-2/prA1-2002
| 道路防護系統 第2部分：安全屏障的性能等級、碰撞試驗、驗收標準和試驗方法 修改A1
| Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers; Amendment A1
|
| EN 1317-3-2000
| 道路防護系統 第3部分：碰撞防護墊的性能等級、碰撞試驗、驗收標準和試驗方法
| Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
|
| EN 1395-1996
| 熱噴涂 熱噴涂設備的驗收檢驗
| Thermal spraying - Acceptance inspection of thermal spraying equipment
|
| EN 13975-2003
| 體外診斷用醫療設備驗收試驗的取樣方法 統計法
| Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects
|
| EN 1712-1997
| 焊接無損檢驗 焊接接頭超聲波檢測 驗收水平
| Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
|
| EN 28206-1992
| 氧氣切割機的驗收試驗 重復精度 工作特性
| Acceptance tests for oxygen cutting machines- Reproducible accuracy- Operational characteristics (ISO 8206:1991)
|
| EN 60041-1994
| 測定水輪機、蓄能泵和水泵-水輪機水力性能的現場驗收試驗
| Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines (IEC 60041:1991, modified) |
| EN 60193-1999
| 水輪機、蓄能泵和水泵水輪機 模型驗收試驗
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (IEC 60193:1999)
|
| EN 60383-1-1996+A11-1999
| 標稱電壓1KV以上的架空線用絕緣子 第1部分：交流系統用陶瓷或玻璃絕緣子單元定義、試驗方法和驗收準則
| Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria (IEC 60383-1:1993)
|
| EN 60383-2-1995
| 標稱電壓高于1000V以上的架空線路用絕緣子 第2部分：交流電路系統絕緣子串和絕緣子組 定義、試驗方法和驗
| Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria (IEC 60383-2:1993)
|
| EN 60514-1995
| 2級交流電度表的驗收方法
| Acceptance inspection of class 2 alternating-current watthour meters (IEC 60514:1975, modified)
|
| EN 60953-1-1995
| 汽輪機熱力驗收試驗規范 第１部分：方法Ａ 適用于大容量凝汽式汽輪機的高精度規范
| Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines (IEC 60953-1:1990)
|
| EN 60953-2-1995
| 汽輪機熱力驗收試驗規范 第２部分：方法Ｂ 適用于各種類型和容量汽輪機的較寬精度和規范
| Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines (IEC 60953-2:1990)
|
| EN 60953-3-2002
| 汽輪機熱力驗收試驗規范 第３部分：
| Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines (IEC 60953-3:2001)
|
| EN 61064-1993
| 汽輪機速度控制系統驗收試驗
| Acceptance tests for steam turbine speed control systems (IEC 61064:1991)
|
| EN 61223-3-1-1999
| 醫用成像部門的評定及例行試驗 第3-1部分：驗收試驗 X-射線攝影和X射線透視設備的圖像性能
| Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999)
|
| EN 61223-3-2-1996
| 醫用成像部門的評定及例行試驗 第3-2部分：驗收試驗 乳腺攝影X-射線設備圖像性能
| Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996)
|
| EN 61223-3-3-1996
| 醫用成像部門的評定及例行試驗 第3-3部分：驗收試驗 數字減影血管造影X-射線設備的圖像性能
| Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA) (IEC 61223-3-3:1996)
|
| EN 61223-3-4-2000
| 醫用成像部門的評定及例行試驗 第3-4部分：驗收試驗 牙科X射線設備的圖像性能
| Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance test- Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000)
|
| EN 61325-1995
| 標稱電壓1000V以上的架空線用絕緣子 直流系統用陶瓷或玻璃絕緣子單元 定義、試驗方法和驗收準則
| Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995)
|
| EN 61358-1996
| 直接接入靜止式交流有功瓦時計(1級和2級)的驗收檢驗
| Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) (IEC 61358:1996)
|
| EN 818-1-1996+AC-1996
| 提升用短節鏈條 安全 第1部分：一般驗收條件
| Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
|
| EN ISO 10360-1-2000+AC-2002
| 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第1部分：詞匯
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000)
|
| EN ISO 10360-2-2001
| 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第2部分：所用的坐標測量機械或測量尺寸
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used or measuring size (ISO 10360-2:2001)
|
| EN ISO 10360-3-2000
| 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第3部分：旋轉臺的軸線作為第四軸線的坐標測
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with a axis of a rotary table as the fourth axis (ISO 10360-3:2000)
|
| EN ISO 10360-4-2000+AC-2002
| 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第4部分：用于掃描型坐標機
| Geometrical Product Specifications (GPS) - Aceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000)
|
| EN ISO 10360-5-2000
| 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第5部分：使用多觸針探測系統的坐標測量機
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems (ISO 10360-5:2000)
|
| EN ISO 10360-6-2001
| 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第6部分：計算高斯相關特性中誤差的評估
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
|
| EN ISO 10545-1-1997
| 陶瓷磚 第1部分：抽樣和驗收條件
| Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)
|
| EN ISO 11546-2-1995
| 聲學 隔聲罩隔聲性能的測定 第2部分：現場測量(驗收和鑒定用)
| Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
|
| EN ISO 14744-1-2000
| 焊接 電子束焊接機的驗收檢驗 第1部分：原理和驗收條件
| Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000)
|
| EN ISO 14744-2-2000
| 焊接 電子束焊接機的驗收檢驗 第2部分：加速電壓特性的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)
|
| EN ISO 14744-3-2000
| 焊接 電子束焊接機的驗收檢驗 第3部分：電子束電流特性的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000)
|
| EN ISO 14744-4-2000
| 焊接 電子束焊接機的驗收檢驗 第4部分：焊接速度的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000)
|
| EN ISO 14744-5-2000
| 焊接 電子束焊接機的驗收檢驗 第5部分：偏轉精度的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000)
|
| EN ISO 14744-6-2000
| 焊接 電子束焊接機的驗收檢驗 第6部分：焊點位置穩定性的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000)
|
| EN ISO 14982-1998
| 農林機械 電磁兼容性 試驗方法和驗收標準
| Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
|
| EN ISO 15609-2-2001
| 金屬焊接工藝的規范和驗收 焊接工藝規范 第2部分：氣焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001)
|
| EN ISO 15614-11-2002
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第11部分：電子和激光束焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
|
| EN ISO 15614-8-2002
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第8部分：管對管板接頭焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)
|
| EN ISO 15616-1-2003
| 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第1部分：一般原則、驗收條件
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
|
| EN ISO 15616-2-2003
| 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第2部分：靜止及動態精度的測量
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
|
| EN ISO 15616-3-2003
| 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第3部分：氣流量及氣壓測量儀的校正
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
|
| EN ISO 3269-2000
| 緊固件 驗收檢查
| Fasteners - Acceptance inspection (ISO 3269:2000)
|
| EN ISO 9906-1999
| 回轉動力泵 液壓性能驗收試驗 等級1和2
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999)
|
| ENV 1317-4-2001
| 道路防護系統 第4部分：安全屏障的終端和過度性能等級、碰撞試驗、驗收標準和試驗方法
| Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
|
| prEN 12266-3-1995
| 工業閥門 交貨技術條件 第3部分：試驗程序和驗收標準
| Industrial valves - Technical conditions of delivery - Part 3: Test procedures and acceptance criteria
|
| prEN 13231-1-2003
| 鐵路設備 軌道 工程驗收 第1部分：軌道工程
| Railway applications - Track; Acceptance of works - Part 1: Work on track; Plain line
|
| prEN 13231-2-2003
| 鐵路設備 軌道 工程驗收 第2部分：道岔和通口工程
| Railway applications - Track; Acceptance of works - Part 2: Work on switches and crossings
|
| prEN 13231-3-2003
| 鐵路設備 軌道 工程驗收 第3部分：鐵軌磨光、銑削和軌道噴鍍工程驗收
| Railway applications - Track; Acceptance of works - Part 3: Acceptance of rail grinding, milling and plaining work in track
|
| prEN 1358-1993
| 木地板(包括拼花地板)和木鑲板及包層木板 一般驗收、標志和交貨規則
| Wood flooring (including parquet) and wood pannelling and cladding; general acceptance; marking and delivery rules
|
| prEN 13741-2003
| 機械通風管組水冷塔的熱能驗收試驗
| Thermal performance acceptance testing of mechanical draught series wet cooling towers
|
| prEN 13979-1-2003
| 鐵路設備 輪副及轉向架，輪子，技術驗收程序 第1部分：鍛制輪和軋制輪
| Railway applications - Wheelsets and bogies, Monobloc wheels; Technical approval procedure - Part 1: Forged and rolled wheels
|
| prEN 14343-2003
| 容積泵 驗收性能試驗
| Rotary positive displacement pumps - Performance tests for acceptance
|
| prEN ISO 15607-2003
| 金屬焊接工藝的規范及驗收 一般規則
| Specification and qualification of welding procedures for metallic materials - General rules (ISO/FDIS 15607:2003)
|
| prEN ISO 15609-1-2000
| 金屬焊接工藝的規范和驗收 焊接工藝規范 第1部分：電弧焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO/DIS 15609-1:2000)
|
| prEN ISO 15609-3-2000
| 金屬焊接工藝的規范和驗收 焊接工藝規范 第3部分：電子束焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO/DIS 15609-3:2000)
|
| prEN ISO 15609-4-2000
| 金屬焊接工藝的規范和驗收 焊接工藝規范 第4部分：激光束焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000)
|
| prEN ISO 15609-5-2000
| 金屬焊接工藝的規范和驗收 焊接工藝規范 第5部分：電阻焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO/DIS 15609-5:2000)
|
| prEN ISO 15610-2003
| 金屬焊接工藝的規范和驗收 用經批準的焊接消耗材料驗收
| Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO/FDIS 15610:2003)
|
| prEN ISO 15611-2003
| 金屬焊接工藝的規范和驗收 用焊接經驗進行驗收
| Specification and qualification of welding procedures for metallic materials - AQualification based on previous welding experience (ISO/FDIS 15611:2003)
|
| prEN ISO 15612-2000
| 金屬焊接工藝的規范和驗收 用標準焊接工藝進行驗收
| Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure (ISO/DIS 15612:2000)
|
| prEN ISO 15613-2003
| 金屬焊接工藝的規范和驗收 用試生產試驗進行驗收
| Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO/FDIS 15613:2003)
|
| prEN ISO 15614-1-2003
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第1部分：鋼的電弧焊和氣焊及鎳和鎳合金的焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/FDIS 15614-1:2003)
|
| prEN ISO 15614-10-2000
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第10部分：超基干焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbasic dry welding (ISO/DIS 15614-10:2000)
|
| prEN ISO 15614-12-2000
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第12部分：點焊、縫焊及凸焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, sean and projection welding (ISO/DIS 15614-12:2000)
|
| prEN ISO 15614-2-2000
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第2部分：鋁及其合金的電弧焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000)
|
| prEN ISO 15614-5-2003
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第5部分：鈦、鋯及其合金的電弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2003)
|
| prEN ISO 15614-9-2000
| 金屬焊接工藝的規范和驗收 焊接工藝試驗 第9部分：水下超基濕焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 9: Underwater hyperbasic wet welding (ISO/DIS 15614-9:2000)
|
| prEN ISO 19840-2003
| 油漆和清漆 用防護漆對鋼結構粗表面進行防腐 干膜厚度的測量及驗收標準
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness of coatings on rough surfaces (ISO/FDIS 19840:2003)
|
| prENV 14033-1-2001
| 鐵路設備 軌道裝置 維修和鋪設機械的驗收條件 第1部分：軌道車輛的運行
| Railway applications - Track - Approval conditions for construction and maintenance machines - Part 1: Running of railbound machines
|
| SY/T 4103-2006
| 鋼質管道焊接及驗收
| Welding and acceptance standard for steel Pipings and pipelines
|
| 編號 | 中文名稱 | 英文名稱 |
|---|