| 編號 | 中文名稱 | 英文名稱 |
|---|
| BIP 2064-2004
| 建筑物規則2000.驗收文獻B
| Building Regulations 2000 - Approved Document B
|
| BIP 2065-2003
| 建筑物規則2000.驗收文獻M
| Building Regulations 2000 - Approved Document M
|
| BS 1571-2-1975
| 容積式壓縮機與排氣機的試驗.第2部分:空氣壓縮機與排氣機的簡化驗收方法
| Specification for testing of positive displacement compressors and exhausters - Methods for simplified acceptance testing for air compressors and exhausters
|
| BS 3135-1989
| 燃?xì)廨啓C(jī)驗收試驗規范
| Specification for gas turbine acceptance test
|
| BS 3S 500-1996
| 鋼板和鋼帶檢驗、試驗及驗收程序
| Procedure for inspection, testing and acceptance of steel sheet and strip
|
| BS 4L 100-1993
| 鍛鋁和鋁合金的檢驗、試驗和驗收程序
| Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
|
| BS 4L 101-1990
| 鋁基和鎂基鑄錠和鑄件的檢驗、試驗和驗收程序
| Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
|
| BS 4T 100-1997
| 無縫鋼管和管材的檢驗、試驗和驗收程序
| Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
|
| BS 5947-1992
| 包括驗收條件的農用輪式拖拉機保護駕駛室及機架的靜負荷試驗方法
| Method of test for static loading of protective cabs and frames for agricultural wheeled tractors, including acceptance conditions
|
| BS 5964-1-1990
| 建筑放樣和測量.第1部分:測量、計劃和組織方法與驗收準則
| Building setting out and measurement - Methods of measuring, planning and organization and acceptance criteria
|
| BS 5S 100-1993
| 鍛鋼制品(鋼板、薄鋼板、鋼帶和鋼管除外)檢驗、試驗和驗收程序
| Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
|
| BS 6001-7-2006
| 計數檢驗抽樣程序.基于控制出廠質量用的信用原則的驗收零抽樣系統
| Acceptance sampling procedures for inspection by attributes - Part 7: Accept-zero sampling system based on credit principle for controlling outgoing quality
|
| BS 6001-9-2002
| 計數取樣檢驗程序.分批檢驗時控制出廠質量的以信任為基礎的零抽樣驗收計劃
| Sampling procedures for inspection by attributes - Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
|
| BS 6065-1981
| 成型耐火材料制品的取樣和驗收試驗方法
| Methods for sampling and acceptance testing of shaped refractory products
|
| BS 6434-1984
| BS 6065"成形耐火材料制品取樣和驗收方法" 使用指南
| Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
|
| BS 6587-1985
| 緊固件的驗收檢驗方法
| Method of acceptance inspection for fasteners
|
| BS 7121-2-2003
| 起重機安全操作實用規程.驗收、試驗和檢查
| Code of practice for safe use of cranes - Inspection, testing and examination
|
| BS 7676-2-1993
| 齒輪驗收法規.驗收試驗期間齒輪機構機械振動的測定
| Acceptance code for gears - Determination of mechanical vibrations of gear units during acceptance testing
|
| BS 7783-1994
| 驗收控制圖
| Acceptance control charts
|
| BS 7910-2005
| 金屬結構裂紋驗收評定方法指南
| Guide to methods for assessing the acceptability of flaws in metallic structures
|
| BS B 100-1992
| 鍛造銅合金的檢測,試驗和驗收程序
| Procedure for inspection, testing and acceptance of wrought copper alloys
|
| BS DD ENV 1317-4-2002
| 道路路障系統.安全路障的終端和過渡端的性能等級、沖擊試驗驗收標準和試驗方法
| Road restraint systems - Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
|
| BS DD IEC/TS 62257-6-2006
| 農村電氣化用小型可再生能源和混合系統的推薦.驗收、操作、維護和替換
| Recommendations for small renewable energy and hybrid systems for rural electrification - Acceptance, operation, maintenance and replacement
|
| BS EN 10222-4-1999
| 壓力容器用鋼鍛件.具有高驗收強度的可焊接細晶粒鋼
| Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength
|
| BS EN 12266-1-2003
| 工業用閥門.閥門試驗.壓力試驗、試驗規程和驗收標準.強制要求
| Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements
|
| BS EN 12266-2-2002
| 工業用閥門.閥門試驗.試驗、試驗規程和驗收標準.補充要求
| Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
|
| BS EN 12484-4-2002
| 灌溉技術.自動草坪灌溉系統.設備安裝和驗收
| Irrigation techniques - Automatic turf irrigation systems - Installation and acceptance
|
| BS EN 12517-1-2006
| 焊縫的無損檢驗.用放射線照相術評定鋼、鎳、鈦及其合金的焊接接縫.驗收等級
| Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
|
| BS EN 1289-1998
| 焊接的無損檢驗.焊接的超聲波探檢驗.驗收等級
| Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels
|
| BS EN 1291-1998
| 焊縫的無損檢驗.焊縫的磁粉檢驗.驗收等級
| Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
|
| BS EN 12952-15-2003
| 水管鍋爐和輔助設備.驗收試驗
| Water-tube boilers and auxiliary installations - Acceptance tests
|
| BS EN 12953-11-2003
| 火管鍋爐.驗收試驗
| Shell boilers - Acceptance tests
|
| BS EN 13121-1-2003
| 地面用玻璃鋼槽罐和容器.原材料.技術條件和驗收條件
| GRP tanks and vessels for use above ground - Raw materials - Specification conditions and acceptance conditions
|
| BS EN 1317-2-1998
| 道路防護體系.安全柵欄的性能等級、沖擊試驗、驗收標準和試驗方法
| Road restraint systems - Performance classes, impact test acceptance criteria and test methods for safety barriers
|
| BS EN 1317-3-2000
| 道路防護系統.防撞緩沖物的性能等級、沖擊試驗驗收標準和試驗方法
| Road restraint systems - Performance classes, impact test acceptance criteria and test methods for crash cushions
|
| BS EN 13231-1-2006
| 鐵路設施.軌道.作業驗收.有碴軌道的作業.平原線
| Railway applications - Track - Acceptance of works - Part 1:Works on ballasted track - Plain line
|
| BS EN 13231-2-2006
| 鐵路設施.軌道.作業驗收.有碴軌道的作業.道岔和交叉口
| Railway applications - Track - Acceptance of works - Part 2:Works on ballasted track - Switches and crossings
|
| BS EN 13231-3-2006
| 鐵路設施.軌道.作業驗收.鋼軌打磨、銑削和軌道計劃作業驗收
| Railway applications - Track - Acceptance of works - Part 3:Acceptance of rail grinding, milling and planing works in track
|
| BS EN 13432-2000
| 包裝.通過合成及生物降解規定包裝可回收性的求.試驗計劃和包裝最終驗收評定標準
| Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
|
| BS EN 13741-2003
| 機械通風系列濕式冷卻塔的熱性能驗收試驗
| Thermal performance acceptance testing of mechanical draught series wet cooling towers
|
| BS EN 1395-1996
| 熱噴涂.熱噴涂設備的驗收檢驗
| Thermal spraying - Acceptance inspection of thermal spraying equipment
|
| BS EN 13975-2003
| 體外診斷用醫療裝置的驗收試驗用取樣規程.統計特性
| Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects
|
| BS EN 13979-1-2004
| 鐵路設施.輪副和轉向架.整輪.技術驗收程序.鍛制和軋制輪
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval - Forged and rolled wheels
|
| BS EN 14343-2005
| 旋轉容積泵.驗收性能試驗
| Rotary positive displacement pumps — Performance tests for acceptance
|
| BS EN 14363-2005
| 鐵路設施.鐵路車輛運行特性的驗收試驗.運行性能試驗和穩定性試驗
| Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests
|
| BS EN 14584-2005
| 無損檢驗.聲學輻射.驗收試驗過程中金屬壓力設備的檢查.AE源的平面位置
| Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
|
| BS EN 14612-2004
| 航天產品保險.自動機械波焊的檢定和驗收
| Space product assurance - Verification and approval of automatic machine wave soldering
|
| BS EN 1610-1998
| 排水管和下水道的施工和驗收
| Construction and testing of drains and sewers
|
| BS EN 168100-1995
| 電子元器件質量評定協調體系.石英晶體器件的分規范.(性能驗收)
| Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (capability approval)
|
| BS EN 1712-1997
| 焊接無損檢驗.焊點超聲檢測.驗收水平
| Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
|
| BS EN 28206-1992
| 氧氣切割機的驗收試驗.可重復準確度.操作特性
| Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
|
| BS EN 60041-1995
| 水輪機,現場驗收試驗測定蓄水泵和渦輪泵液壓性能
| Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
|
| BS EN 60193-1999
| 水輪機、蓄水泵和泵輪機.模型驗收試驗
| Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests |
| BS EN 60383-1-1998
| 標稱電壓1000V以上的架空線用絕緣子.交流系統用陶瓷或玻璃絕緣子裝置.定義、試驗方法和驗收準則
| Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
|
| BS EN 60383-2-1995
| 標稱電壓高于1000V的架空線路用絕緣子.第2部分:交流電路系統絕緣子串和絕緣子裝置.定義、試驗方法和驗收標
| Insulators for overhead lines with a nominal voltage above 1000 V. Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
|
| BS EN 60514-1995
| 2級交流電度表驗收檢驗
| Acceptance inspection of class 2 alternating-current watthour meters
|
| BS EN 60747-16-10-2004
| 半導體器件.單片微波集成電路的技術驗收程序(TAS)
| Semiconductor devices - Technology Approval Schedule (TAS) for monolithic microwave integrated circuits
|
| BS EN 60953-1-1996
| 汽輪機熱驗收試驗規程.大型冷凝汽輪機的高精度規范
| Rules for steam turbine thermal acceptance tests - High accuracy for large condensing steam turbines
|
| BS EN 60953-3-2002
| 汽輪機熱力驗收試驗規則.改裝的汽輪機的熱性能驗證試驗
| Rules for steam turbine thermal acceptance tests - Thermal performance verification tests of retrofitted steam turbines
|
| BS EN 61064-1993
| 汽輪機速度控制系統驗收試驗指南
| Guide to acceptance tests for steam turbine speed control systems
|
| BS EN 61223-3-1-1999
| 醫療成像部門的評定及常規試驗.驗收試驗.輻射照相和輻射顯微照相系統用X射線設備的成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for radiographic and radiscopic systems
|
| BS EN 61223-3-3-1997
| 醫用成像部門常規試驗評定.驗收檢驗.數字減法血管造影術(DSA)用X射線成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiograp
|
| BS EN 61223-3-4-2000
| 醫療成像部門的評定及常規試驗.驗收試驗.牙科X射線設備成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests
|
| BS EN 61223-3-5-2004
| 醫療成像部門的評價及常規試驗.驗收試驗.計算機斷層攝影X射線設備的成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of computed tomography X-ray equipment
|
| BS EN 61325-1996
| 標稱電壓高于1000V以上高架線的絕緣.直流裝置陶瓷或玻璃絕緣件.定義,試驗方法和驗收規則
| Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems - Definitions, test methods and acceptance criteria
|
| BS EN 61358-1996
| 電力系統(1和2類)用直接連接的交流電流靜態瓦特表的驗收檢驗
| Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
|
| BS EN 818-1-1996
| 提升用的短節鏈條.安全性.一般驗收條件
| Short link chain for lifting purposes - Safety - General conditions of acceptance
|
| BS EN ISO 1-2002
| 產品幾何量技術規范(GPS).產品幾何量技術規范和驗收的標準溫度
| Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification
|
| BS EN ISO 10360-1-2001
| 產品幾何量規范(GPS).坐標測量機(CMM)的驗收和復檢試驗.詞匯
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Vocabulary
|
| BS EN ISO 10360-2-2002
| 產品幾何量技術規范(GPS).坐標式測量機(CMM)的驗收和再驗證試驗.測量尺寸用坐標式測量機
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring size
|
| BS EN ISO 10360-3-2001
| 產品幾何量規范(GPS).坐標測量機(CMM)的驗收和復檢試驗.旋轉臺的軸線作為第四條軸線的坐標測量機
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs with the axis of the rotary table as the fourth axis
|
| BS EN ISO 10360-4-2001
| 產品幾何量規范(GPS).坐標測量機(CMM)的驗收和復檢試驗.用于掃描測量模式的坐標測量機
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used in scanning measuring mode
|
| BS EN ISO 10360-5-2001
| 產品幾何量規范(GPS).坐標式測量設備(CMM)的驗收和復檢試驗.帶多觸針探測系統的坐標測量機
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs using multiple stylus probing systems
|
| BS EN ISO 10360-6-2002
| 產品幾何量技術規范(GPS).坐標測量機(CMM)的驗收和復驗試驗.計算高斯相關特性誤差的估計
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features
|
| BS EN ISO 10545-1-1997
| 瓷磚.抽樣和驗收依據
| Ceramic tiles - Sampling and basis for acceptance
|
| BS EN ISO 11546-2-1996
| 聲學.隔音罩隔聲性能的測定.現場測定(驗收和鑒定用)
| Acoustics - Determination of sound insulation performances of enclosures - Measurements in situ (for acceptance and verification purposes)
|
| BS EN ISO 14744-1-2001
| 焊接.電子束焊接機的驗收檢驗.原理和驗收條件
| Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions
|
| BS EN ISO 14744-2-2001
| 焊接.電子束焊接機的驗收檢驗.加速電壓特性測量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of accelerating voltage characteristics
|
| BS EN ISO 14744-3-2001
| 焊接.電子束焊接機的驗收檢驗.電子束電流特性的測量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of beam current characteristics
|
| BS EN ISO 14744-4-2001
| 焊接.電子束焊接機的驗收檢驗.焊接速度的測量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of welding speed
|
| BS EN ISO 14744-5-2001
| 焊接.電子束焊接機的驗收檢驗.偏轉精度的測量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of run-out accuracy
|
| BS EN ISO 14744-6-2001
| 焊接.電子束焊接機的驗收檢驗.電焊位置穩定性的測量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of stability of spot position
|
| BS EN ISO 14982-1998
| 農業和林業機械.電磁兼容性.試驗方法和驗收標準
| Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
|
| BS EN ISO 15616-1-2003
| 高質量焊接和切割用CO2激光束機的驗收試驗.通用原則和驗收條件
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
|
| BS EN ISO 15616-2-2003
| 高質量焊接和切割用CO2激光束機的驗收試驗.靜態和動態精確度的測定
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
|
| BS EN ISO 15616-3-2003
| 高質量焊接和切割用CO2激光束機的驗收試驗.氣體流量和壓力測量儀的校正
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
|
| BS EN ISO 22827-1-2006
| Nd:YAG激光束焊接機器的驗收試驗.帶光纖送的機器.激光裝配
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
|
| BS EN ISO 22827-2-2006
| Nd:YAG激光束焊接機器的驗收試驗.帶光纖傳送的機器.移動機理
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
|
| BS EN ISO 3269-2001
| 緊固件.驗收檢驗
| Fasteners - Acceptance inspection
|
| BS EN ISO 5674-2004
| 農林用拖拉機和機械.動力輸出軸護罩(PTO).強度和磨損試驗及驗收標準
| Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria
|
| BS EN ISO 9906-2000
| 渦輪式泵.液壓性能驗收試驗.1和2級
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
|
| BS ISO 10099-2001
| 氣壓液動.氣液缸.最終檢驗和驗收標準
| Pneumatic fluid power - Cylinders - Final examination and acceptance criteria
|
| BS ISO 10100-2001
| 液壓傳動.液壓缸.驗收試驗
| Hydraulic fluid power - Cylinders - Acceptance tests
|
| BS ISO 10425-2003
| 石油和天然氣工業用鋼絲繩.最低要求和驗收條件
| Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
|
| BS ISO 10725-2001
| 散裝材料檢驗的驗收取樣計劃和程序
| Acceptance sampling plans and procedures for the inspection of bulk materials
|
| BS ISO 1217-1997
| 位移式壓縮機.驗收試驗
| Displacement compressors - Acceptance tests
|
| BS ISO 13448-1-2005
| 基于優先分配原則的驗收取樣規程(APP).APP法指南
| Acceptance sampling procedures based on the allocation of priorities principle (APP) - Guidelines for the APP approach
|
| BS ISO 13448-2-2004
| 基于優先分配原則(APP)的驗收抽樣過程.按照屬性驗收抽樣用協調單個抽樣計劃
| Acceptance sampling procedures based on the allocation of priorities principles (APP) - Coordinated single sampling plans for acceptance sampling by attributes
|
| BS ISO 14560-2004
| 根據屬性驗收抽樣程序.每百萬非合格樣品中規定的質量等級
| Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
|
| BS ISO 15394-2000
| 包裝.航運、運輸和驗收標簽的兩維符號和條形碼
| Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
|
| BS ISO 17101-2004
| 農用機械.轉式和甩刀式割草機.拋擲物體試驗和驗收標準
| Agricultural machinery - Rotary and flail mowers - Thrown-object test and acceptance criteria
|
| BS ISO 1834-1999
| 起重用短環鏈.驗收總則
| Short link chain for lifting purposes - General conditions of acceptance
|
| BS ISO 1986-1-2001
| 臥軸矩臺平面磨床的驗收條件.精度檢驗.工作臺長度達到1600mm的機床
| Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm
|
| BS ISO 21247-2005
| 產品驗收用組合驗收零取樣系統和過程控制程序
| Combined accept-zero sampling systems and process control procedures for product acceptance
|
| BS ISO 23079-2005
| 鎂和鎂合金.回爐料.要求、分類和驗收
| Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
|
| BS ISO 3070-3-1999
| 臥式鏜銑床的驗收條件.精度試驗.第3部分:帶獨立固定工作臺的落地式機床
| Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Floor type machines with detached, stationary work-holding table
|
| BS ISO 3070-4-1999
| 臥式鏜銑床的驗收條件.精度試驗.第4部分:可移動床身的多刀刨床
| Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Planer type machines with movable column
|
| BS ISO 3601-3-2005
| 液壓流體動力.O型環.質量驗收標準
| Fluid power systems - O-rings - Quality acceptance criteria
|
| BS ISO 4094-2005
| 紙、紙板和紙漿.試驗儀器的國際間校準.標準化和授權實驗室的驗收和任命
| Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories
|
| BS ISO 4703-2001
| 雙柱式平面磨床的驗收條件.導軌磨床.精度試驗
| Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy
|
| BS ISO 8579-1-2002
| 齒輪裝置驗收規程.空氣中噪聲試驗規程
| Acceptance code for gear units - Test code for airborne sound
|
| DD ENV 1317-4-2002
| 道路減震系統.安全屏障的接線端與過渡配件的性能等級、 沖擊試驗驗收標準和試驗方法
| Road restraint systems. Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
|
| DD ENV 1402-3-1999
| 不定型耐火產品.驗收特性
| Unshaped refractory products. Characterization as received
|
| PD CR 13909-2002
| 識別卡系統.部門間用柔性薄卡.驗收準則
| Identification card systems. Intersector thin flexible cards. Acceptance criteria
|
| 編號 | 中文名稱 | 英文名稱 |
|---|