| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 14424-2005
| 消防設備.帶電動機的防爆可攜式傳送泵.要求、類型和驗收試驗
| Firefighting equipment - Explosion-proof portable transfer pump with electric motor - Requirements, type and acceptance test
|
| DIN 15030-1977
| 提升裝置.起重設備的驗收試驗.原則
| Lifting Equipment; Acceptance Testing of Crane Installations; Principles
|
| DIN 16901-1982
| 塑料模壓件:線性尺寸的公差和驗收條件
| Plastics mouldings; Tolerances and acceptance conditions for linear dimensions
|
| DIN 1943-1975
| 汽輪機熱驗收試驗(VDI汽輪機規則)
| Thermal acceptance tests of steam turbines
|
| DIN 1945-1-1980
| 容積式壓縮機.第1部分:熱工驗收及性能試驗
| Displacement compressor; thermodynamic acceptance and performance test
|
| DIN 1946-6-1998
| 通風和空調.第6部分:居住建筑物的通風.要求、性能和驗收(VDI通風實施規程)
| Ventilation and air conditioning - Part 6: Ventilation for residential buildings; requirements, performance, acceptance (VDI ventilation code of practice)
|
| DIN 2302-2005
| 焊接消耗品.非合金和細粒鋼的水下高壓濕焊用焊接消耗品.水下高壓濕焊用焊接消耗品的試驗和鑒定的驗收規范
| Welding consumables - Welding consumables for underwater hyperbaric wet welding of unalloyed and fine grain steels - Acceptance specifications for testing and qualification of welding consumables for underwater hyperbaric wet welding
|
| DIN 28411-1976
| 真空技術.質譜儀式檢漏器的驗收規范.術語
| Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms
|
| DIN 28426-1-1983
| 真空技術.近似真空和中等真空范圍用旋轉柱塞真空泵、葉片式旋轉真空泵和旋轉式活塞真空泵驗收規范
| Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum
|
| DIN 28426-2-1976
| 真空技術.中等級真空范圍用羅茨真空泵的驗收規范
| Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum
|
| DIN 28427-1983
| 真空技術.流體蒸氣壓低于1mbar的擴散泵和蒸氣噴射真空泵的驗收規范
| Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar
|
| DIN 28428-1978
| 真空技術.渦輪分子泵的驗收規則
| Vacuum technology; acceptance specifications for turbomolecular pumps
|
| DIN 28429-2003
| 真空技術.濺射離子泵驗收規范
| Vacuum technology - Acceptance specifications for getter ion pumps
|
| DIN 28431-1987
| 真空技術.液體環式真空泵的驗收規范
| Vacuum technology; acceptance specifications for liquid ring vacuum pumps
|
| DIN 28432-1996
| 真空技術.膜片真空泵驗收規范
| Vacuum technology - Acceptance specifications for diaphragm vacuum pumps
|
| DIN 3321-1987
| 消防栓的要求和驗收試驗
| Requirements and acceptance tests for hydrants
|
| DIN 3771-4-1984
| 液壓系統.Ｏ型密封圈.質量驗收準則
| Fluid systems; O-rings; quality acceptance criteria
|
| DIN 4325-1971
| 蓄水泵的現場驗收試驗
| Field acceptance tests of storage pumps
|
| DIN 4341-1-1979
| 燃?xì)廨啓C(jī).驗收試驗
| Gas turbines; acceptance tests
|
| DIN 4341-2-1986
| 燃?xì)廨啓C(jī)驗收試驗.第2部分:評價范例
| Gas turbines; acceptance tests; examples for evalution
|
| DIN 51774-1-1975
| 液體燃料的檢驗.第1部分:用溴驗收值大于 0.5g/100g (BB) 的試樣通過電測完全停止法對溴驗收值的測定
| Testing of liquid fuels; determination of bromine acceptance by electrometric Dead-Stop-method of samples with a bromine acceptance of more than 0,5 g/100 g (BA)
|
| DIN 51774-2-1975
| 液體燃料的檢驗.第2部分:用溴驗收值最高可達 0.5g/100g (BB) 的試樣通過電測完全停止法對溴驗收值的測定
| Testing of liquid fuels; determination of bromine acceptance by electrometric Dead-Stop-method of samples with a bromine acceptance up to 0,5 g/100 g (BB)
|
| DIN 55222-2-1980
| 機床.第2部分:壓力機制動器.驗收條件
| Machine Tools; Press Brakes; Acceptance Conditions
|
| DIN 55350-31-1985
| 質量管理和統計學概念.取樣驗收檢驗的概念
| Concepts of quality management and statistics; concepts of acceptance sampling inspection
|
| DIN 55802-1979
| 機床.折邊機.驗收條件
| Machine Tools; Folding Machines; Acceptance Conditions
|
| DIN 55803-1979
| 機床.旋壓機和碾平機.驗收條件
| Machine Tools; Spinning and Planishing Lathes; Acceptance Conditions
|
| DIN 58959-2 Bb.1-1997
| 醫療微生物學質量管理.第2部分:試樣采集、運輸及驗收要求.專用試樣特性
| Quality management in medical microbiology - Part 2: Requirements for sample collection, transport and acception of specimens; characteristics for special specimens
|
| DIN 58959-2-1997
| 醫療微生物學質量管理.第2部分:試樣采集、運輸和驗收要求
| Quality management in medical microbiology - Part 2: Requirements for sample collection, transport and acceptance of specimens
|
| DIN 65152-1984
| 航空和航天.提升夾具.計算和驗收條件
| Aerospace; lift fixtures; conditions for computation and acceptance
|
| DIN 65153-1997
| 航空航天.等離子弧焊機驗收試驗
| Aerospace - Acceptance testing of plasma arc welding equipment
|
| DIN 65171-1984
| 航空和航天.熔焊夾具的驗收檢驗.和控制及移動的輔助設備精度
| Aerospace; acceptance testing of fusion welding jigs; and auxiliary equipment accuracy of control and movement
|
| DIN 65233-1986
| 航空航天.電阻焊機和滾縫焊機的驗收
| Aerospace; acceptance test of resistance spot and roller seam welding machines
|
| DIN 6868-56-1997
| Ｘ光診斷照片質量保證.第56部分:照片拷貝系統驗收試驗
| Image quality assurance in X-ray diagnosis - Part 56: Acceptance testing for hard copy cameras
|
| DIN 69051-3-1989
| 機床.球形螺釘.驗收條件及驗收試驗
| Machine tools; ball screws; acceptance conditions and acceptance tests
|
| DIN 7738-1959
| 層壓材料制品.硬化纖維板.驗收.檢驗方法
| Laminated Products; Vulcanized Fibre, Acceptance, Test Methods
|
| DIN 8242-3-1987
| 表盤.第3部分:驗收試驗
| Dials for watches; acceptance test
|
| DIN 8301-1987
| 鐘表用外殼.驗收試驗
| Cases for clocks; acceptance test
|
| DIN 8605-1976
| 機床.高精度車床.旋轉直徑至500mm.車床中心距至1500mm.驗收條件
| Machine Tools; Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions
|
| DIN 8606-1976
| 機床.標準精度車床.旋轉直徑至800mm.驗收條件
| Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions
|
| DIN 8607-1976
| 機床.旋轉直徑800 至1600mm標準精度車床.驗收條件
| Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions
|
| DIN 8609-1-1979
| 機床.立式車床鏜床.驗收條件.一般介紹
| Machine tools; vertical turning and boring lathes, acceptance conditions, general introduction
|
| DIN 8609-2-1979
| 機床.單柱立式車鏜床.驗收條件
| Machine tools; vertical turning and boring lathes with one column, acceptance conditions
|
| DIN 8609-3-1979
| 機床.第3部分:立式車床和雙柱式車床.驗收條件
| Machine tools; vertical turning and boring lathes with two columns, acceptance conditions
|
| DIN 8611-1-1976
| 機床.臥式單軸自動車床.驗收條件
| Machine Tools; Horizontal Single-spindle Automatic Lathes; Acceptance Conditions
|
| DIN 8611-2-1976
| 機床.正面裝載的臥式自動車床.驗收條件
| Machine Tools; Horizontal Automatic Lathes; Front-loaded; Acceptance Conditions
|
| DIN 8611-3-1976
| 機床.臥式自動車床.瑞士型自動車床.驗收條件
| Machine Tools; Horizontal Automatic Lathes; Swiss-Type Automatic Lathes; Acceptance Conditions
|
| DIN 8613 Bb.-1970
| 機床的驗收條件.旋轉工件加工用臥式多軸自動車床.試驗結果表格
| Acceptance Conditions for Machine Tools; Multi-spindle Automatic Lathes; Horizontal Type for Rotating Workpieces; Form for Test Results
|
| DIN 8615-3-1979
| 機床.臥軸固定工作臺銑床.驗收條件
| Machine Tools; Milling Machines with Horizontal Spindle and Fixed Table; Acceptance Conditions
|
| DIN 8615-4-1979
| 機床.帶立軸和固定工作臺的銑床.驗收條件
| Machine Tools; Milling Machines with Vertical Spindle and Fixed Table; Acceptance Conditions
|
| DIN 8620-3-1980
| 機床.水平主軸式帶旋轉工作臺的鏜銑床.第3部分:驗收條件
| Machine Tools; Boring and Millung Machines with Horizontal Spindle; Table-Type Machines; Rotary Tables; Acceptance Conditions
|
| DIN 8625-1-1976
| 機床.可調臂搖臂鉆床.驗收條件
| Machine Tools; Radial Drilling Machines with Adjustable Arm; Acceptance conditions
|
| DIN 8626-1-1976
| 機床.立式鉆床.箱式鉆床.驗收條件
| Machine Tools; Vertical Drilling Machines; Box Type Drilling Machines; Acceptance Conditions
|
| DIN 8626-2-1976
| 機床.立式鉆床.柱式鉆床.驗收條件
| Machine Tools; Vertical Drilling Machines; Pillar Type Drilling Machines; Acceptance Conditions
|
| DIN 8630-1988
| 機床.帶活動工作臺的外圓磨床.驗收條件
| Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions
|
| DIN 8632-1-1989
| 機床.臥式活動矩形臺平面磨床.驗收條件
| Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions
|
| DIN 8632-3-1976
| 機床.帶臥式磨輪軸的平面磨床.驗收條件
| Machine Tools; Surface Grinding Machines with Horizontal Grinding Wheel Spindle, with Round Table; Acceptance Conditions
|
| DIN 8632-4-1978
| 機床.平面磨床.雙立柱平面磨床.導軌磨床.驗收條件
| Machine Tools; Surface Grinding Machines; Surface Grinding Machines with Two Columns; Grinding-machines for Grinding Slideways; Acceptance Conditions
|
| DIN 8633-3-1977
| 機床.立式砂輪回轉和圓形工作臺的平面磨床.驗收條件
| Machine Tools; Surface Grinding Machines with Vertical Grinding Wheel Spindle and Round Table; Acceptance Conditions
|
| DIN 8634-1994
| 機床.無心外圓磨床.驗收條件
| Machine tools; external cylindrical centreless grinding machines; acceptance conditions
|
| DIN 8635-1971
| 機床驗收條件.行程500mm以下的立式珩磨機
| Acceptance Conditions for Machine Tools; Vertical Honing Machines up to 500 mm Length of Stroke
|
| DIN 8637-1990
| 機床.夾頭直徑在200mm以下的砂輪軸.驗收條件
| Machine tools; grinding spindles with cartridge diameters up to 200 mm; acceptance conditions
|
| DIN 8650-1985
| 機床.前開式機械能壓力機.驗收條件
| Machine tools; open front mechanical power presses; acceptance conditions
|
| DIN 8651-1990
| 機床.雙柱偏心壓力機.驗收條件
| Machine tools; straight sided power presses; acceptance conditions
|
| DIN 8660-1-1981
| 機床.刨床.單立柱刨床.驗收條件
| Machine tools; Planing machines; Single-column planing machines; Acceptance conditions
|
| DIN 8660-2-1981
| 機床.刨床.雙立柱刨床.驗收條件
| Machine tools; Planing machines; Two-column planing machines; Acceptance conditions
|
| DIN 8665-1983
| 機床.立式表面型拉床.驗收條件
| Machine tools; vertical surface type broaching machines; acceptance conditions
|
| DIN 8666-1983
| 機床.臥式外型拉床.驗收條件
| Machine tools; horizontal external type broaching machines; acceptance conditions
|
| DIN 8667-1983
| 機床.立式內型拉床.驗收條件
| Machine tools; vertical internal type broaching machines; acceptance conditions
|
| DIN 8668-1983
| 機床.臥式內型拉床.驗收條件
| Machine tools; horizontal internal broaching machines; acceptance conditions
|
| DIN EN 12266-1-2003
| 工業用閥門.閥門試驗.第1部分:壓力試驗、試驗程序和驗收準則.強制性要求
| Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003
|
| DIN EN 12266-2-2003
| 工業用閥門.閥門測試.第2部分:試驗、試驗規程和驗收標準.補充要求
| Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements; German version EN 12266-2:2002
|
| DIN EN 12484-4-2003
| 灌溉技術.草坪自動灌溉系統.第4部分:安裝和驗收; 德文版本 EN 12484-4:2002
| Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance; German version EN 12484-4:2002
|
| DIN EN 1289-2002
| 焊縫的無損檢驗.焊縫的滲透檢驗.驗收標準; 德文版本 EN 1289:1998 + A1:2002
| Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels; German version EN 1289:1998 + A1:2002
|
| DIN EN 1291-2002
| 焊縫的無損檢驗.焊縫的磁性粒子檢驗.驗收標準; 德文版本 EN 1291:1998 + A1:2002
| Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels; German version EN 1291:1998 + A1:2002
|
| DIN EN 12952-15-2004
| 水管鍋爐和輔助設備.第15部分:驗收試驗
| Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003
|
| DIN EN 12953-11-2003
| 火管鍋爐.第11部分:驗收試驗
| Shell boilers - Part 11: Acceptance tests; German version EN 12953-11:2003
|
| DIN EN 13121-1-2003
| 地上用GRP槽罐和容器.第1部分:原材料.技術條件和驗收條件
| GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions; German version EN 13121-1:2003
|
| DIN EN 1317-2-2006
| 道路限制系統.第2部分:安全障壁的性能等級、沖撞驗收試驗準則和試驗方法
| Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers; German version EN 1317-2:1998 + A1:2006
|
| DIN EN 1317-3-2000
| 道路限制系統.第3部分:事故緩沖器的性能分類、沖擊試驗的驗收標準和試驗方法:德文版本 EN 1317-3:2000
| Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions; German version EN 1317-3:2000
|
| DIN EN 13231-1-2006
| 鐵路設施.軌道.作業驗收.第1部分:有碴軌道的作業.平原線
| Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line; German version EN 13231-1:2006
|
| DIN EN 13231-2-2006
| 鐵路設施.軌道.作業驗收.第2部分:有碴軌道的作業.道岔和交叉口
| Railway applications - Track - Acceptance of works - Part 2: Works on ballasted track - Switches and crossings; German version EN 13231-2:2006
|
| DIN EN 13231-3-2006
| 鐵路設施.軌道.作業驗收.第3部分:鋼軌打磨、銑削和軌道計劃作業驗收
| Railway applications - Track - Acceptance of works - Part 3: Acceptance of rail grinding, milling and planing work in track; German version EN 13231-3:2006
|
| DIN EN 13432 Berichtigung 1-2005
| 包裝.通過合成及生物降解規定包裝可回收性的要求.包裝最終驗收的測試計劃和評定標準
| Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000, Corrigenda to DIN EN 13432:2000-12; German version EN 13432:2000/AC:2005
|
| DIN EN 13432-2000
| 包裝.通過合成和生物降解評定包裝可回收性的要求.試驗計劃和包裝最后驗收標準的評定
| Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000
|
| DIN EN 13741-2004
| 機械干燥系列潮濕冷卻塔的熱性能驗收試驗
| Thermal performance acceptance testing of mechanical draught series wet cooling towers; German version EN 13741:2003
|
| DIN EN 1395-1996
| 熱噴鍍.熱噴鍍?cè)O(shè)備驗收檢驗
| Thermal spraying - Accpetance inspection of thermal spraying equipment; German version EN 1395:1996
|
| DIN EN 13975-2003
| 體外診斷用醫療裝置的驗收試驗用取樣規程.統計特性
| Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects; German version EN 13975:2003, German and English texts
|
| DIN EN 13979-1-2004
| 鐵路設施.輪副和行車機構.整體式車輪.技術驗收程序.第1部分:鍛造和軋制輪
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels; German version EN 13979-1:2003
|
| DIN EN 1434-4-2003
| 量熱計.第4部分:結構類型驗收試驗(包括修改件A1:2002)
| Heat meters - Part 4: Pattern approval tests (includes amendment A1:2002); German version EN 1434-4:1997 + A1:2002
|
| DIN EN 14363-2005
| 鐵路設施.鐵路車輛運行特性的驗收試驗.運行性能試驗和穩態試驗
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests; German version EN 14363:2005
|
| DIN EN 14612-2004
| 航天產品保證.自動機器波釬焊的檢驗和驗收
| Space product assurance - Verification and approval of automatic machine wave soldering; German version EN 14612:2003
|
| DIN EN 1712-2002
| 焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收標準; 德文版本 EN 1712:1997 + A1:2002
| Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels; German version EN 1712:1997 + A1:2002
|
| DIN EN 28206-1992
| 氧氣割機的驗收試驗.復驗結果的準確性.操作特性
| Acceptance testing for oxygen cutting machines; testing the accuracy and operational characteristics (ISO 8206:1991); german version EN 28206:1992
|
| DIN EN 301366-2001
| 通用個人通信(UPT).UPT階段2.UPT集成電路卡(ICC)和驗卡設備接口的功能規范.UPT卡驗收雙音多頻(DTMF)設備.一
| Universal Personal Telecommunication (UPT) - UPT phase 2 - Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device; Conformance test specification (Endorsement of the English version EN 301366 V 1.1.2 (1999-05) as German Standard)
|
| DIN EN 603-1-1996
| 鋁和鋁合金.擠壓鍛坯料.第1部分:驗收和交貨技術條件
| Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery; German version EN 603-1:1996
|
| DIN EN 60383-1-1997
| 公稱電壓高于1000V的架空線路絕緣子.第1部分:交流系統用陶瓷或玻璃絕緣子的定義、試驗方法和驗收準則
| Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-1:1993); German version EN 60383-1:1996
|
| DIN EN 60383-2-1995
| 公稱電壓高于1000V的架空線路絕緣子.第2部分:交流電路系統絕緣子串和絕緣子裝置.試驗方法和驗收準則
| Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-2:1993); German version EN 60383-2:1995
|
| DIN EN 60514-1995
| 2級交流電度表驗收檢驗
| Acceptance inspection of class 2 alternating-current watt-hour meters (IEC 60514:1975, modified); German version EN 60514:1995
|
| DIN EN 60747-16-10-2005
| 半導體器件.第16-10部分:單片微波集成電路的技術驗收計劃
| Semiconductor devices - Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits (IEC 60747-16-10:2004); German version EN 60747-16-10:2004
|
| DIN EN 61223-3-1-2001
| 醫院放射科評定和常規試驗.第3-1部分:驗收試驗.輻射照相和輻射顯微照相系統用X射線設備成像性能
| Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests; Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999); German version EN 61223-3-1:1999
|
| DIN EN 61223-3-2-2001
| 醫療放射科的評定和定期檢驗.第3-2部分:驗收試驗.X-射線設備乳腺成像性能
| Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests; Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996); German version EN 61223-3-2:1996
|
| DIN EN 61223-3-3-2000
| 醫院放射科評定和常規試驗.第3-3部分:驗收試驗.數字減法血管造影術(DSA)用X射線透視設備成像性能
| Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests; Imaging performance of X-ray equipment for digital subtraction angiography (IEC 61223-3-3:1996); German version EN 61223-3-3:1996
|
| DIN EN 61223-3-4-2001
| 醫療放射科評定和常規試驗.第3-4部分:驗收試驗.牙科X射線設備的成像性能
| Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000
|
| DIN EN 61223-3-5-2005
| 醫療成像部門的評價和常規檢驗.第3-5部分:驗收試驗.計算機斷層攝影X射線設備的成像性能
| Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2004); German version EN 61223-3-5:2004
|
| DIN EN 61325-1996
| 額定電壓1000V以上架空線絕緣子.直流系統陶瓷或玻璃絕緣子.定義、試驗方法和驗收準則
| Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995); German version EN 61325:1995
|
| DIN EN 61358-1996
| 直接連接交流電有功瓦時計的驗收方法(1級和2級)
| Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) (IEC 61358:1996); German version EN 61358:1996
|
| DIN EN 61943-2001
| 集成電路.生產線驗收應用指南
| Integrated circuits - Manufacturing line approval application guideline (IEC 61943:1999); German version EN 61943:1999
|
| DIN EN 818-1-1996
| 起重用短鏈鎖.安全性.第1部分:一般驗收條件
| Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance; German version EN 818-1:1996
|
| DIN EN ISO 10360-1-2003
| 產品幾何量規范(GPS).坐標測量?jī)x(CMM)驗收和再檢定試驗.第1部分:術語
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002
|
| DIN EN ISO 10360-2-2002
| 幾何產品技術規范(GPS).坐標測量?jī)x(CMM)驗收和復檢試驗.第2部分:測量尺寸使用的坐標測量?jī)x (ISO 10360-2:20
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size (ISO 10360-2:2001); German version EN ISO 13060-2:2001
|
| DIN EN ISO 10360-3-2000
| 產品幾何量規范(GPS).坐標測量機(CMM)的驗收和復檢試驗.第3部分:旋轉臺的軸線作為第四軸線的坐標測量機
| Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000); German version EN ISO 10360-3:2000
|
| DIN EN ISO 10360-4-2003
| 產品幾何量規范(GPS).坐標測量?jī)x(CMM)驗收和再檢定試驗.第4部分:掃描型坐標測量?jī)x
| Geometrical Product Specifications (GPS) - Acceptance test and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning mode (ISO 10360-4:2000 + Cor. 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-4:2000 + AC:2002
|
| DIN EN ISO 10360-5-2001
| 幾何產品規范(GPS).坐標測量設備(CMM)的驗收和再鑒定試驗.第5部分:多針筆探測坐標測量設備
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple stylus probing systems (ISO 10360-5:2000); German version EN ISO 10360-5:2000
|
| DIN EN ISO 10360-6-2002
| 幾何產品技術規范(GPS).坐標測量機(CMM)的驗收和復檢試驗.第6部分:計算高斯相關特性誤差的估計 (ISO 10360-
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001); German version EN ISO 10360-6:2001
|
| DIN EN ISO 10545-1-1997
| 瓷磚.第1部分:抽樣和驗收條件
| Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995); German version EN ISO 10545-1:1997
|
| DIN EN ISO 11546-2-1996
| 聲學.密封罩隔聲性能測定.第2部分:驗收和驗證現場測量
| Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:1995
|
| DIN EN ISO 14744-1-2000
| 焊接.電子束焊接機的驗收檢驗.第1部分:規則和驗收條件
| Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000); German version EN ISO 14744-1:2000
|
| DIN EN ISO 14744-2-2000
| 焊接.電子束焊接機的驗收檢驗.第2部分:加速電壓特性的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of acceleration voltage characteristics (ISO 14744-2:2000); German version EN ISO 14744-2:2000
|
| DIN EN ISO 14744-3-2000
| 焊接.電子束焊接機的驗收檢驗.第3部分:電子束電流特性的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000); German version EN ISO 14744-3:2000
|
| DIN EN ISO 14744-4-2000
| 焊接.電子束焊接機的驗收檢驗.第4部分:焊接速度的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000); German version EN ISO 14744-4:2000
|
| DIN EN ISO 14744-5-2000
| 焊接.電子束焊接機驗收檢驗.第5部分:偏轉精度的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000); German version EN ISO 14744-5:2000
|
| DIN EN ISO 14744-6-2000
| 焊接.電子束焊接機驗收檢驗.第6部分:焊點位置穩定性的測量
| Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000); German version EN ISO 14744-6:2000
|
| DIN EN ISO 14982-1998
| 農業和林業機械.電磁兼容性.檢驗方法和驗收標準
| Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998); German version EN ISO 14982:1998
|
| DIN EN ISO 15616-1-2003
| 高質量焊接和切割用CO2激光機驗收試驗.第1部分:通則和驗收條件
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003); German version EN ISO 15616-1:2003
|
| DIN EN ISO 15616-2-2003
| 高質量焊接和切割用CO2激光機驗收試驗.第2部分:靜態和動態精度測定
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003); German version EN ISO 15616-2:2003
|
| DIN EN ISO 15616-3-2003
| 高質量焊接和切割用CO2激光機驗收試驗.第3部分:氣體流量和壓力測量?jī)x校正
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
|
| DIN EN ISO 3269-2000
| 緊固件.驗收檢查
| Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000
|
| DIN EN ISO 5674-2004
| 農林業用拖拉機和機械.動力輸出軸護罩.強度和磨損試驗及驗收標準
| Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004); German version EN ISO 5674:2004
|
| DIN EN ISO 7500-1 Bb.3-1999
| 金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.疲勞試驗機的要求、驗
| Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing machines
|
| DIN EN ISO 9906-2002
| 旋轉式動力泵.液壓性能驗收試驗.等級1和2 (ISO 9906:1999); 德文版本 EN ISO 9906:1999
| Rotodynamic pumps - Hydraulic performance acceptance test - Grades 1 and 2 (ISO 9906:1999); German version EN ISO 9906:1999
|
| DIN IEC 61178-3-1-1995
| 石英晶體單元.IEC電子元器件質量評定體系規范(IECQ).第3部分:分規范:合格驗收.第1節:空白詳細規范
| A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 3: Sectional specification, qualification approval; section 1: Blank detail specification; identical with IEC 61178-3-1:1993
|
| DIN IEC/TS 60034-18-42-2006
| 旋轉電機.第18-42部分:由電壓轉換器饋電的旋轉電機用II類電絕緣系統的鑒定和驗收試驗(IEC 2/1385/NP-2006)
| Rotating electrical machines - Part 18-42: Qualification and acceptance tests for Type II electrical insulation systems used in rotating electrical machines fed from voltage converters (IEC 2/1385/NP:2006)
|
| DIN ISO 16622-2003
| 氣象學.聲吶風速計/溫度計.平均風速計驗收試驗方法
| Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements (ISO 16622:2002)
|
| DIN ISO 6545-1997
| 機床.滾齒機驗收條件.精度檢測
| Acceptance conditions for gear hobbing machines - Testing of the accuracy (ISO 6545:1992)
|
| DIN V 55391-2003
| 合格評定結果的認可和驗收協議
| Arrangements for the recognition and acceptance of conformity assessment results (ISO/IEC Guide 68:2002)
|
| DIN V 65352 Bb.1-1987
| 航空航天.纖維復合物的合格鑒定和驗收試驗結果的統計評價方法.計算實例
| Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites; example of calculation
|
| DIN V 65352-1987
| 航空航天.纖維復合物的合格鑒定和驗收試驗結果的統計評價方法
| Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites
|
| DIN V 6868-151-2002
| X光片質量保證.第151部分:牙科X射線設備驗收檢驗.安裝、維護和修整后照片質量的檢查原則
| Image quality assurance in X-ray diagnostics - Part 151: Acceptance testing of dental radiographic equipment; Rules for the inspection of image quality after installation, maintenance and modification
|
| DIN V 6868-152-2005
| X光診斷部門的圖像質量保證.第152部分:乳腺X射線攝影設備的驗收檢驗
| Image quality assurance in diagnostic X-ray departments - Part 152: Acceptance testing of mammographic X-ray equipment
|
| DIN V 6868-55-1996
| X光診斷照片質量保證.第55部分:X射線設備的驗收檢驗.膠片處理功能檢驗
| Image quality assurance in X-ray diagnosis - Part 55 Acceptance testing in direct radiographic and fluoroscopic X-ray-systems including film processing
|
| DIN V 6868-57-2001
| X光診斷圖像的質量保證.第57部分:圖像顯示裝置的驗收試驗
| Image quality assurance in diagnostic X-ray departments - Part 57: Acceptance testing for image display devices
|
| DIN V 6868-58-2001
| X光診斷部門圖像的質量保證.第58部分:帶數字圖像接收器的X射線投影系統的驗收試驗
| Image quality assurance in diagnostic X-ray departments - Part 58: Acceptance testing of projection radiography systems with digital image receptors
|
| DIN V ENV 1317-4-2002
| 道路限制系統.第4部分:安全屏障終端和過渡帶的性能等級、沖擊試驗驗收標準和試驗方法; 德文版本 ENV 1317-4
| Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers; German version ENV 1317-4:2001
|
| DIN VDE 0119-207-14-2005
| 鐵路車輛狀況.控制和測量?jī)x表技術.第207-14部分:已驗收車輛上的軟件更改程序
| State of the railway vehicles - Control and instrumentation technology - Part 207-14: Procedure for changing the software on approved vehicles
|
| 編號 | 中文名稱 | 英文名稱 |
|---|