| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| A 211-1961 | 飛行器用100°沉頭鋼螺栓規范(統一螺紋和十字槽)規范 | Specification for 100 countersunk head steel bolts (Unified threads and cruciform recesses) for aircraft |
| BS 10-1962 | 管子、閥門和配件用法蘭和螺栓連接規范 | Specification for flanges and bolting for pipes, valves, and fittings |
| BS 1473-1972 | 一般工程用可鍛鋁和鋁合金規范.鉚釘、螺栓和螺釘坯料 | Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock |
| BS 1768-1963 | 統一精密六角頭螺栓、螺釘和螺母(UNC與UNF螺紋)規范.標準系列 | Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads) - Normal series |
| BS 2485-1987 | T形槽、T形螺栓、T形螺母與榫舌規范 | Specification for tee slots, tee bolts, tee nuts and tenons |
| BS 2693-1-1956 | 雙頭螺栓.第1部分:通用雙頭螺拴 | Specification for screwed studs - General purpose studs |
| BS 2693-2-1964 | 雙頭螺栓規范.第2部分:高級雙頭螺拴(美國標準ASA B1.12 5級干涉配合螺紋)推薦規范 | Specification for screwed studs - Recommendations for high grade studs (with Class 5 interference fit threads to American Standard ASA B1.12) |
| BS 2A 110-1962 | 飛行器用抗剪鋼螺栓的鋼制螺母(統一六角形和統一螺紋)規范 | Specification for steel nuts (Unified hexagons and Unified threads) for shear bolts for aircraft |
| BS 2A 173-1962 | 飛行器用100°埋頭鋼螺栓(統一螺紋)規范 | Specification for 100 ° countersunk head steel bolts (Unified threads) for aircraft |
| BS 2A 174-1962 | 飛行器用100°埋頭耐腐蝕鋼螺栓(統一螺紋)規范 | Specification for 100 ° countersunk head corrosion-resisting steel bolts (Unified threads) for aircraft |
| BS 2A 175-1962 | 飛行器用100°埋頭鋁合金螺栓(統一螺紋)規范 | Specification for 100 ° countersunk head aluminium alloy bolts (Unified threads) for aircraft |
| BS 2A 229-1972 | 160,000磅力/平方英寸(1100MPa)六角頭鋼螺栓規范 | Specification for hexagonal head steel bolts 160000 lbf/in2 (1100/MPa) |
| BS 2A 230-1974 | 100°埋頭鋼螺栓(1100MPa,具有高扭矩高速旋入槽)規范 | Specification for 100 ° countersunk head steel bolts [1100 MPa with Hi-torque speed drive recesses] |
| BS 2A 231-1993 | 螺栓用滾壓螺紋.螺紋引導和收尾要求 | Rolled threads for bolts - Lead and runout requirements |
| BS 2A 241-2005 | 拉伸強度為1250MPa(180000 lbf/英寸<上標2>)或更大的突頭鋼制螺栓的一般要求.規范 | General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater - Specification |
| BS 2A 25-1962 | 飛行器用鋼制六角頭螺栓(B.A和B.S.F螺紋)規范 | Specification for steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft |
| BS 2A 26-1962 | 飛行器用耐蝕鋼六角頭螺栓(B.A和B.S.F螺紋)規范 | Specification for corrosion-resisting steel hexagonal-headed bolts (B.A and B.S.F. threads) for aircraft |
| BS 2A 296-1995 | 米制螺栓和螺釘.形位公差 | Bolts and screws, metric - Tolerances of form and position |
| BS 2A 30-1962 | 飛行器用緊公差螺桿的鋼制六角頭螺栓(B.A和B.S.F螺紋)規范 | Specification for steel hexagonal-headed bolts (B.A. and B.S.F threads) with close tolerance shanks for aircraft |
| BS 2A 57-1962 | 飛行器用鋼制六角頭抗剪螺栓(B.S.F螺紋)規范 | Specification for steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft |
| BS 2A 58-1962 | 飛行器用抗剪螺栓的鋼制六角頭螺母(B.S.F螺紋)規范 | Specification for steel hexagonal nuts (B.S.F. threads) for shear bolts for aircraft |
| BS 2A 59-1962 | 飛行器用緊公差螺桿的鋼制鍍鎘六角頭螺栓(B.A和B.S.F螺紋)規范 | Specification for cadmium-plated steel hexagonal-headed bolts (B.A. and B.S.F. threads) with close tolerance shanks for aircraft |
| BS 2A 60-1962 | 飛行器用鋼制鍍鎘六角頭抗剪螺栓(B.S.F螺紋)規范 | Specification for cadmium-plated steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft |
| BS 2A 61-1962 | 飛行器用鋁合金制六角頭螺栓(B.A和B.S.F螺紋)規范 | Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft |
| BS 2S 116-1964 | 飛機材料規范.機械制造用40號碳素鋼光亮冷棒(55-65噸力/平方英寸;限定等圓斷面1/4英寸)(主要用于制造螺栓) | Specification for aircraft material - '40' carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section 3/4 inch) (primarily intended for the manufacture of machined bolts) |
| BS 2S 147-1976 | 鍛制螺栓、螺母用的含0.5%鎳-鉻-鉬鋼棒規范 | Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts |
| BS 2S 149-1976 | 鍛制螺栓、螺母用的含1.75%鎳-鉻-鉬鋼棒規范 | Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts |
| BS 3454-1995 | 煤礦用的1.9/3.3kV、300A螺栓連接防火電纜連接器和適配器規范(包括380/660V和640/1100V,300A適配器)規范 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
| BS 3905-1995 | 煤礦用3.8/6.6 KV、300 A螺栓連接防火電纜連接器和適配器規范 | Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines |
| BS 3A 108-1962 | 飛行器用帶緊公差螺桿的鋼螺栓(統一六角頭和統一螺紋)規范 | Specification for steel bolts (Unified hexagons and Unified threads) with close tolerance shanks for aircraft |
| BS 3A 109-1985 | 鋼制抗剪螺栓(統一六角和統一螺紋)規范 | Specification for steel shear bolts (Unified hexagons and Unified threads) |
| BS 3A 116-1962 | 飛行器用盤頭鋼螺栓(統一螺紋)規范 | Specification for steel pan head bolts (Unified threads) for aircraft |
| BS 3A 117-1962 | 飛行器用盤頭耐腐蝕鋼螺栓(統一螺紋)規范 | Specification for corrosion-resisting steel pan head bolts (Unified threads) for aircraft |
| BS 3A 171-1962 | 飛行器鋁合金盤頭螺栓(統一螺紋)規范 | Specification for aluminium alloy pan head bolts (Unified threads) for aircraft |
| BS 3A 212-1993 | 55/65 tonf/in m*m 鍍隔鋼螺栓(六角形、3A統一螺紋和緊公差螺桿) | Specification for cadmium-plated steel bolts, 55/65 tonf/in2 (Unified hexagons, 3A Unified threads and close tolerance shanks) |
| BS 3S 102-1969 | 碳鉬鋼(僅供鍛造螺栓用的棒材)規范 | Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only) |
| BS 3S 105-1969 | 碳素鋼(僅供鍛造螺栓用的棒材)規范 | Specification for carbon steel (bar for the manufacture of forged bolts only) |
| BS 4604-1-1970 | 結構鋼制構件高強度摩擦緊固螺栓應用規范,米制系列.第1部分:普通螺拴 | Specification for the use of high strength friction grip bolts in structural steelwork - Metric series - General grade |
| BS 4604-2-1970 | 結構鋼制構件中高強度摩擦緊固螺栓應用規范,米制系列.第2部分:高級螺拴(標準桿) | Specification for the use of high strength friction grip bolts in structural steelwork - Metric series - Higher grade (parallel shank) |
| BS 4882-1990 | 法蘭和保持壓力用螺栓連接規范 | Specification for bolting for flanges and pressure containing purposes |
| BS 4A 100-2003 | 航空航天系列.抗拉強度不超過1249MPa的螺栓和空轉螺母的一般要求規范 | Aerospace series - Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 4A 102-2002 | 航空器用鋼制螺栓(統一六角形和統一螺紋) | Specification for steel bolts (Unified hexagons and Unified threads) for aircraft |
| BS 4A 104-2002 | 飛行器用耐腐蝕鋼螺栓(統一六角形和統一螺紋) | Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads) for aircraft |
| BS 4A 111-1993 | 具有緊公差桿的鍍隔鋼螺栓規范(統一六角形和統一螺紋) | Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks |
| BS 4A 112-1992 | 鍍隔鋼抗剪螺栓規范(統一六角形和統一螺紋) | Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads) |
| BS 4A 113-1999 | 鍍鎘蘑菇頭統一螺紋開槽螺栓規范 | Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive, bolts |
| BS 4A 114-1999 | 耐腐蝕鋼制蘑菇頭開槽螺栓規范(強度等級880/1080) | Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength class 880/1080) |
| BS 4A 169-2002 | 飛行器用鋁合金螺栓(統一六角形和統一螺紋) | Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft |
| BS 4A 170-1999 | 鋁合金蘑菇頭開槽螺栓(統一螺紋)規范 | Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread) |
| BS 4A 228-1997 | 飛機用1250MPa(180,000lbf/in)鋼雙六角頭螺栓規范 | Specification for steel double hexagon bolts - 1250 MPa (180,000 lbf/in2) for aircraft |
| BS 5125-1990 | 煤礦用50A 650V阻燃、保險和螺栓連接插頭和插座規范 | Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines |
| BS 5268-4.2-1990 | 建筑用木材.第4部分:木結構耐火性.第2節:木螺栓墻和格柵地板結構耐火性計算推薦標準 | Structural use of timber - Fire resistance of timber structures - Recommendations for calculating fire resistance of timber stud walls and joisted floor constructions |
| BS 5380-1984 | 用O 型圈密封及G 系列緊固螺紋的液壓系流入口及連接螺栓規范 | Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads |
| BS 5620-1995 | 礦山用1100V、200A安全防火與螺栓連接的插頭與插座規范 | Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines |
| BS 5655-8-1983 | 電梯與服務電梯.第8部分:電梯懸吊用有眼螺栓 | Lifts and service lifts - Part 8: Specification for eyebolts for lift suspension |
| BS 6040-1981 | 螺栓、螺釘、螺母和附件的名命 | Nomenclature for bolts, screws, nuts and accessories |
| BS 64-1992 | 鐵路魚尾板用的標準和高強度鋼螺栓和螺母規范 | Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
| BS 6487-1984 | 螺拴、螺釘和雙頭螺栓的開口銷孔與保險孔規范 | Specification for split pin holes and wire holes in bolts, screws and studs |
| BS 6490-1984 | 運土機械的防松螺栓頭外形和尺寸(不包括螺紋尺寸)規范 | Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery |
| BS 7345-1990 | 螺栓、螺釘和螺柱標稱長度和通用螺栓螺紋長度規范 | Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts |
| BS 7419-1991 | 壓緊螺栓規范 | Specification for holding down bolts |
| BS 7644-2-1993 | 直接拉力指示器.螺母面和螺栓面墊圈規范 | Direct tension indicators - Specification for nut face and bolt face washers |
| BS 7670-1-1993 | 電阻凸焊用鋼螺母和螺栓.第1部分:尺寸和性能規范 | Steel nuts and bolts for resistance projection welding - Specification for dimensions and properties |
| BS 7670-2-1997 | 電阻凸焊的鋼螺母和螺栓.焊接螺母和螺栓的焊接規范 | Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld bolts |
| BS 7715-1994 | 具有非金屬常用扭矩元件螺紋的流行式扭矩型螺栓、螺釘及螺柱規范 | Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread |
| BS 7793-1-1995 | 螺栓固定鋼板的瓷釉涂層.農業用泥漿罐的螺栓固定鋼板的涂層規范 | Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in agricultural slurry tanks |
| BS 7795-1995 | 預加微囊包封化學粘合件內裝螺紋的螺栓、螺釘和螺柱規范 | Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread |
| BS 7814-1995 | 裝有既可以頭下鎖緊又可以防止?jié)L動功能的螺栓和螺釘規范 | Specification for bolts and screws incorporating either underhead locking or anti-rotation features |
| BS 7842-1996 | 具有預作用的螺紋密封特性的安裝在螺紋上的螺栓、螺釘和螺柱 | Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread |
| BS 7861-2-1997 | 煤礦用地層支撐系統部件.鳥籠式電纜螺栓連接規范 | Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting |
| BS 826-1978 | 鋼制螺栓連接的單層擱板(立式角型) | Specification for steel single tier bolted shelving (angle upright type) |
| BS A 101-1969 | 鈦螺栓一般要求規范 | Specification for general requirements for titanium bolts |
| BS A 226-1965 | 六角頭鋼螺栓規范(短螺紋:3A類) | Specification for steel hexagon head bolts (short thread: Class 3A) |
| BS A 227-1965 | 鋼鍋頭螺栓規范(3A類短螺紋) | Specification for steel pan head bolts (short thread: Class 3A) |
| BS A 232-1968 | 100°埋頭鋼螺栓(160000磅力/平方英寸(110 hbar),規定扭矩槽)規范 | Specification for 100 ° countersunk head steel bolts (160 000 lbf/in2 (110 hbar) with Torq-set recesses) |
| BS A 254, A 255 [...]-1976 | 規范.六角頭鈦合金螺栓160 000 lbf/inUP2 (1100 MPa) | Specification - Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) |
| BS A 254, A 255, A 256, A 257, A 258, A 259-1976 | 規范.六角頭鈦合金螺栓160 000 磅力/英寸(上標2)(1100MPa) | Specification - Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) |
| BS A 254-1976 | 160,000磅力/平方英寸(1100MPa)六角頭鈦合金螺栓規范 | Specification - Hexagonal head titanium alloy bolts 160 000 lbf/in2 (1100 MPa) |
| BS A 266, A 267 [...]-1977 | 帶高轉距速度驅動凹槽的100 沉頭鈦合金螺栓160 000 lbf/inUP2 (1100 MPa)規范 | Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) with Hi-torque speed drive recesses |
| BS A 266, A 267, A 268, A 269, A 270, A 271-1977 | 有高轉矩快速旋入凹槽的160000lbf/in<上標2>(1100MPa)的100°埋頭鈦合金螺栓規范 | Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) with Hi-torque speed drive recesses |
| BS A 266-1977 | 具有高扭矩速度引導槽的抗拉強度為160,000磅力/平方英寸(1100MPa)的100°沉頭鈦合金螺栓規范 | Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/in2 (1100 MPa) with Hi-torque speed drive recesses |
| BS A 299-1989 | 抗拉強度為1250MPa和具有MJ螺紋的合金鋼凸頭螺栓采辦規范 | Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads |
| BS A 300-1989 | 抗拉強度為1100MPa和具有MJ螺紋的合金鋼螺栓采辦規范 | Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads |
| BS A 301-1989 | 抗拉強度為1100MPa和具有MJ螺紋的耐熱抗腐蝕螺栓采辦規范 | Procurement of corrosion and heat-resisting steel bolts with strength classification 1100 MPa and MJ threads |
| BS A 303-1994 | 強度等級小于或等于1100 MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱12角螺栓頭標稱桿 | Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 304-1994 | 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋的由金屬材料制成的標稱12角螺栓頭標稱或節徑桿螺 | Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 305-1994 | 螺栓. 試驗方法 | Bolts - Test methods |
| BS A 307-1994 | 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋由金屬材料制成的標稱花鍵頭、標稱或節徑桿螺栓. | Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 308-1994 | 強度等級小于或等于1100 MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱花鍵頭標稱桿螺栓 | Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 309-1994 | 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋的由金屬材料制成的大六角頭標稱或節徑桿螺栓.尺 | Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 310-1995 | 強度等級小于或等于1250MPa-1800MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱大12角螺 | Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions |
| BS A 332-1999 | 航空航天用1100MPa強度的MJ螺紋鈦合金螺栓.采購規范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa - Procurement specification |
| BS A 358-2-2000 | MJ螺紋.螺栓和螺母的極限尺寸 | MJ threads - Limit dimensions for bolts and nuts |
| BS A 363-2000 | 強度等級為1550MPa耐熱鎳基合金MJ螺紋螺栓.采購規范 | Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification |
| BS AU 190-1983 | 拖載達2000kg的掛車三角形拉桿上超限裝置安裝面尺寸和固定螺栓規范 | Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg |
| BS AU 50-2.3-1994 | 輪胎和車輪.第2部分:車輪和輪輞.第3節:商用車輛的道路車輪螺母、雙頭螺栓和螺栓規范 | Tyres and wheels - Wheels and rims - Specification for road-wheel nuts, studs and bolts for commercial vehicles |
| BS DD CEN/TS 1591-4-2007 | 法蘭及其連接件.帶墊圈圓形法蘭連接件的設計原則.符合壓力設備指令的螺栓連接件裝配職工能力的合格鑒定 | Flanges and their joints - Design rules for gasketed circular flange connections - Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive |
| BS EN 10319-2-2006 | 金屬材料.拉伸應力松弛測試.螺栓連接模型用程序 | Metallic materials - Tensile stress relaxation testing - Procedure for bolted joint models |
| BS EN 13411-5-2003 | 鋼絲繩接線端.安全.U形螺栓鋼絲繩夾具 | Terminations for steel wire ropes - Safety - U-bolt wire rope grips |
| BS EN 14219-2003 | 米制細牙螺紋六角法蘭面螺栓.小系列 | Hexagon bolts with flange with metric fine pitch thread - Small series |
| BS EN 14399-1-2005 | 預加負荷用高強度結構螺栓組件.一般要求 | High-strength structural bolting assemblies for preloading - General requirements |
| BS EN 14399-2-2005 | 預加負荷用高強度結構螺栓組件.預加負荷的適合性試驗 | High-strength structural bolting assemblies for preloading - Suitability test for preloading |
| BS EN 14399-3-2005 | 預加負荷用高強度結構螺栓組件.系統HR.六角螺栓和螺母組件 | High-strength structural bolting for preloading - System HR - Hexagon bolt and nut assemblies |
| BS EN 14399-4-2005 | 預負載用高強度結構螺栓連接組件.系統HV.六螺栓和螺母組件 | High-strength structural bolting assemblies for preloading - System HV - Hexagon bolt and nut assemblies |
| BS EN 14399-5-2005 | 預負載用高強度結構螺栓連接組件.平墊圈 | High-strength structural bolting assemblies for preloading - Plain washers |
| BS EN 14399-6-2005 | 預負載用高強度結構螺栓連接組件.平倒角墊圈 | High-strength structural bolting assemblies for preloading - Plain chamfered washers |
| BS EN 15048-1-2007 | 非預加負荷結構的螺栓連接組件.一般要求 | Non-preloaded structural bolting assemblies - General requirements |
| BS EN 15048-2-2007 | 非預加負荷結構的螺栓連接組件.適宜性試驗 | Non-preloaded structural bolting assemblies - Suitability test |
| BS EN 1515-1-2000 | 法蘭及其接頭.螺栓連接.螺栓連接的選擇 | Flanges and their joints - Bolting - Selection of bolting |
| BS EN 1515-2-2002 | 法蘭及其連接件.螺栓連接. PN 標識的鋼法蘭用的螺栓材料分類 | Flanges and their joints - Bolting - Classification of bolt materials for steel flanges, PN designated |
| BS EN 1515-3-2005 | 法蘭及其連接件.螺栓連接.等級標注的鋼法蘭用螺栓材料的分類 | Flanges and their joints - Bolting - Classification of bolt materials for steel flanges, class designated |
| BS EN 15282-2007 | 釉層和搪瓷.儲水、處理水、市政或工業排水和污水用螺栓連接鋼罐的設計 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| BS EN 1662-1998 | 帶法蘭的六角螺栓.小型系列 | Hexagon bolts with flange - Small series |
| BS EN 1665-1997 | 帶法蘭緣的六角頭螺栓.重型系列 | Hexagon bolts with flange - Heavy series |
| BS EN 20225-1992 | 緊固件.螺栓、螺柱和螺母.圖形符號和尺寸 | Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions |
| BS EN 20273-1992 | 緊固件.螺栓和螺釘自由尺寸孔 | Fasteners - Clearance holes for bolts and screws |
| BS EN 20898-7-1995 | 緊固件機械性能.標稱直徑為1MM到10MM的螺栓和螺釘?shù)呐まD(zhuǎn)試驗和最小扭矩 | Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| BS EN 24015-1992 | 六角頭螺栓.B級產品.減縮桿(桿徑近似中徑) | Hexagon head bolts - Product grade B. Reduced shank (shank diameter pitch diameter) |
| BS EN 2413-1995 | 鍍鎘的合金鋼短螺紋緊公差薄六角頭帶肩螺栓.等級:1100MPa(室溫)/235℃ | Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C |
| BS EN 2549-2006 | 航空航天系列.二硫化鉬潤滑陽極處理的鈦制短螺紋緊公差標準螺桿標準六角頭螺栓.等級:1100MPa(室溫)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 2583-1997 | 耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)MJ螺紋螺栓.等級:1275MPa(室溫)/650℃.技術規范 | Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C - Technical specification |
| BS EN 26157-1-1992 | 緊固件的表面不均勻性.第1部分:一般要求的螺栓、螺釘和螺柱 | Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements |
| BS EN 26157-3-1992 | 緊固件的表面不均勻性.第3部分:有特殊要求的螺栓、螺釘和螺柱 | Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements |
| BS EN 2859-2006 | 航空航天系列.鍍鎘合金鋼短螺紋緊公差標準螺桿標準六角頭螺栓.等級:1100MPa(室溫)/235℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C |
| BS EN 2870-1996 | 二硫化鉬潤滑的陽極化的鈦合金短螺紋緊公差標準螺桿標準雙六角頭螺栓.等級:1100MPa(室溫)/315℃ | Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) /315 °C |
| BS EN 2874-1996 | 鈍化處理的耐熱鎳基合金中長度螺紋緊公差標準螺桿的大雙六角頭螺栓.等級:1550MPa(室溫)/315℃ | Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature) /315 °C |
| BS EN 28839-1992 | 緊固件機械性能.有色金屬制螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals |
| BS EN 2887-1995 | 鈍化處理的耐蝕鋼的螺紋至螺栓頭的標準六角頭螺栓.等級:600MPa(室溫)/425℃ | Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| BS EN 2888-2006 | 鈍化耐蝕鋼制短螺紋粗公差標準螺桿標準六角頭米制螺栓.分類:600MPa(室溫)/425℃ | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 °C |
| BS EN 2925-1994 | FE-PA92HT(A286)耐熱鋼制長螺紋減荷螺桿的雙六角頭螺栓.等級:900MPa(室溫)/650℃ | Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286) - Classification: 900 MPa (at ambient temperature)/650 °C |
| BS EN 2926-1996 | 鍍銀的FE-FA92HT(A286)耐熱鋼長螺紋減荷螺桿的雙六角頭螺栓.等級:900MPa(室溫)/650℃ | Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C |
| BS EN 2927-1996 | NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿雙六角頭螺栓.等級:1275MPa(室溫)/650℃ | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C |
| BS EN 2928-1996 | 鍍銀的NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿的雙六角頭螺栓.等級:1275MPa(室溫)/650℃ | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C |
| BS EN 2929-1996 | NI-P101HT(Waspaloy)型耐熱鎳基合金制長螺紋安全柄十二角頭螺栓.等級:1210MPa(室溫)/730℃ | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C |
| BS EN 2930-1996 | 鍍銀的NI-P101HT(沃斯帕洛尹)耐熱鎳基合金長螺紋減荷螺桿的雙六角頭螺栓.等級:1210MPa(室溫)/730℃ | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 °C |
| BS EN 2931-1994 | FE-PA92HT(A286)耐熱鋼制的長螺紋減荷螺桿的T型頭螺栓.等級:900MPa(室溫)/650℃ | Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C |
| BS EN 2932-1996 | 鍍銀FE-PA92HT(A286)耐熱鋼制長螺紋安全柄T型頭螺栓.等級:900MPa(室溫)/650℃ | Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C |
| BS EN 2933-1996 | NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿的T型頭螺栓.等級:1275MPa(室溫)/650℃ | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C |
| BS EN 2934-1996 | 鍍銀的NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿的T型頭螺栓.等級:1275MPa(室溫)/650℃ | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification:1275 MPa (at ambient temperature)/650 °C |
| BS EN 2935-1996 | NI-P101HT(沃斯帕洛尹)耐熱鎳基合金長螺紋減荷螺桿的T型頭螺栓.等級:1210MPa(室溫)/730℃ | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification:1210 MPa (at ambient temperature)/730 °C |
| BS EN 2936-1996 | 鍍銀的NI-P101HT(沃斯帕洛尹)耐熱鎳基合金長螺紋減荷螺桿的T型頭螺栓.等級:1210MPa(室溫)/730℃ | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C |
| BS EN 3006-1994 | FE-PA92HT(A286)耐熱鋼長螺紋減荷螺桿的六角頭螺栓.等級:900 MPa(室溫)/650℃ | Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C |
| BS EN 3007-1996 | 鍍銀的FE-PA92HT(A286)耐熱鋼長螺紋減荷螺桿的六角頭螺栓.等級:900 MPa(室溫)/650℃ | Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), Silver plated - Classification: 900 MPa (at ambient temperature)/650 °C |
| BS EN 3008-1998 | 耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制薄柄長螺紋六角頭螺栓.等級:1275 MPa(室溫)/650℃ | Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C |
| BS EN 3009-1998 | 鍍銀耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制薄柄長螺紋六角頭螺栓.等級:1275 MPa(室溫)/650℃ | Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification - 1275 MPa (at ambient temperature)/650 °C |
| BS EN 3010-1998 | 耐熱鎳基合金NI-P101HT(沃斯帕洛尹合金)薄柄長螺紋六角頭螺栓.等級:1210 MPa(室溫)/730℃ | Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C |
| BS EN 3011-1998 | 鍍銀耐熱鎳基合金NI-P101HT(沃斯帕洛尹合金)薄柄長螺紋六角頭螺栓.等級:1210 MPa(室溫)/730℃ | Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 °C |
| BS EN 3052-1994 | 鈍化處理的耐熱耐蝕鋼制短螺紋緊公差標準螺桿標準六角頭螺栓.等級:1100 MPa(室溫)/425℃ | Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C |
| BS EN 3063-1994 | 耐熱鎳基合金NI-P101HT(沃斯帕洛尹合金)制的中長度螺紋緊公差螺桿雙六角頭螺栓.等級:1210 MPa(室溫)/730℃ | Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C |
| BS EN 3112-1995 | 鍍鎘的合金鋼的螺紋至螺栓頭的標準六角頭螺栓.等級:900 MPa(室溫)/235℃ | Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
| BS EN 3379-1996 | 鍍銀的NI-P101HT(沃斯帕洛尹)耐熱鎳基合金中長度螺紋緊公差螺桿的雙六角頭螺栓.等級:1210 MPa(室溫)/730℃ | Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C |
| BS EN 3444-2006 | 航空航天系列.鈍化鎳合金制耐熱、標準柄、緊公差中長螺紋大直徑十二沉頭螺栓.等級:1250MPa(室溫)/650℃ | Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature) / 650 ℃ |
| BS EN 3724-2004 | 細桿長螺紋雙六角頭鍍MoS2的鈦合金TI-P64001螺栓.強度等級:1100MPa(室溫) | Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strength class: 1100 MPa (at ambient temperature) |
| BS EN 3740-1997 | 二硫化鉬潤滑的陽極化的鈦合金短螺紋緊公差螺桿薄六角頭帶肩螺栓.等級:1100 MPa(室溫)/315℃ | Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C |
| BS EN 3818-2005 | 航空航天系列.MJ螺紋的鈦合金TI-P64001螺栓.強度等級:1100MPa(室溫).技術規范 | Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification |
| BS EN 3832-2005 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制長螺紋、細桿、十二角螺栓.等級:1550MPa(室溫)/650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature) / 650 °C |
| BS EN 3833-2005 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MJ螺紋螺栓.等級:1550MPa(室溫)/650℃.技術規范 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature) / 650 °C - Technical specification |
| BS EN 3907-2004 | 航空航天系列.標準桿長螺紋雙六角頭鍍MoS2的鈦合金TI-P64001螺栓.等級:1100MPa(室溫)/350 鳦 | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1100MPa (at ambient temperature)/350 °C |
| BS EN 3912-2007 | 航空航天系列.鍍銀FE-PA2601(FE-PA92HT,A286)型長螺紋細桿六瓣凹槽平頭螺栓耐熱鋼.分類:1100MPa(環境溫度)/ | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1100 MPa (at ambient temperature) / 650 °C |
| BS EN 4009-2005 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制中長螺紋、緊公差柄、十二角頭螺栓.等級:1550MPa(室 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature) |
| BS EN 4172-2006 | 航空航天系列.緊公差TI-P64001陽極電鍍的米制鈦合金桿沉頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 °C（周圍溫 | Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 4173-2006 | 航空航天系列.緊公差TI-P64001陽極電鍍的米制鈦合金桿１００°正常頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 | Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4176-2005 | 航空航天系列.緊公差TI-P64001鈦合金制陽極電鍍或鋁質有色覆層１００°正常或沉頭緊固/凹頭鎖緊螺栓.TI-P99 | Aerospace series - Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification |
| BS EN 4321-2004 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制的帶安全鎖線孔、細桿、長螺紋、鍍銀的雙六角頭螺栓 | Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification - 1 550 Mpa (at ambient temperature)/650 °C |
| BS EN 4322-2004 | 航空航天系列.鈦合金TI-P64001制的帶安全鎖線孔、細桿、長螺紋、陽極氧化、鍍MoS2的雙六角頭螺栓.強度等級. | Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in titanium alloy TI-P64001, anodized , MoS2 coated - Strength class - 1 100 MPa (at ambient temperature) |
| BS EN 4352-2004 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制帶安全鎖線孔、細桿、長螺紋、鍍MoS2 的雙六角頭螺 | Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C |
| BS EN 4401-2006 | 航空航天系列.緊公差TI-P64001鋁制有色覆層的米制鈦合金桿沉頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 °C（周 | Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4402-2006 | 航空航天系列.緊公差TI-P64001鋁制有色覆層的米制鈦合金桿１００°正常頭、凹頭鎖緊螺栓.分類:1100 MPa / 3 | Lockbolts, 100 °countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4498-2005 | 航空航天系列.有色鋁涂層、鈍化的、耐熱鎳基合金、中等長度螺紋、緊公差標稱桿、大雙六角頭螺栓.等級:1550M | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| BS EN 4501-2006 | 航空航天系列.帶鍍鋁涂層的陽極電鍍鈦合金短螺紋緊公差標準柄正六角頭螺栓、米制系列.等級:1100MPa(室溫)/3 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN ISO 10434-2004 | 石油、石化和相關工業用螺栓帽狀鋼閘閥 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| BS EN ISO 10664-2005 | 螺栓和螺釘用內板擰的六角花形 | Hexalobular internal driving feature for bolts and screws |
| BS EN ISO 13918-1998 | 焊接.弧螺栓焊用螺栓和陶瓷箍套 | Welding - Studs and ceramic ferrules for arc stud welding |
| BS EN ISO 14555-2006 | 焊接.金屬材料的電弧螺栓焊 | Welding - Arc stud welding of metallic materials |
| BS EN ISO 3506-1-1998 | 耐腐蝕不銹鋼緊固件的機械特性.螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs |
| BS EN ISO 4014-2001 | 六角頭螺栓.產品等級A和B級 | Hexagon head bolts - Product grades A and B |
| BS EN ISO 4016-2001 | 六角頭螺栓.產品等級C級 | Hexagon head bolts - Product grade C |
| BS EN ISO 4759-1-2001 | 緊固件公差.螺栓、螺釘、螺柱和螺母.產品等級A、B和C級 | Tolerances for fasteners - Bolts, screws, studs and nuts - Product grades A, B and C |
| BS EN ISO 4759-3-2000 | 緊固件公差.螺栓、螺釘和螺母用平墊圈.產品等級A和C | Tolerances for fasteners - Plain washers for bolts, screws and nuts - Product grades A and C |
| BS EN ISO 8765-2001 | 米制細牙螺紋六角頭螺栓.產品等級A和B級 | Hexagon head bolts with metric fine pitch thread - Product grades A and B |
| BS EN ISO 887-2000 | 通用米制螺栓、螺釘和螺母用平墊圈.總方案 | Plain washers for metric bolts, screws and nuts for general purposes - General plan |
| BS EN ISO 898-1-1999 | 碳鋼和合金鋼制的緊固件的機械特性.螺栓、螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
| BS EN ISO 9974-1-2000 | 普通和液壓傳動用聯接件.用ISO 261彈性螺紋或金屬與金屬間密封的氣門和雙頭螺栓端頭.螺紋氣門 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Threaded ports |
| BS EN ISO 9974-2-2000 | 普通和液壓傳動用聯接件.用ISO 261彈性螺紋或金屬與金屬間密封的氣門和雙頭螺栓端頭.(E型)彈性密封的雙頭螺 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E) |
| BS EN ISO 9974-3-2000 | 普通和液壓用聯接結件.用ISO 261螺紋的彈性或金屬與金屬間密封的氣門和雙頭螺栓端頭.(B型)金屬與金屬間密封 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B) |
| BS HR 650-1972 | 制造螺栓、螺柱、定位螺釘和螺母用耐熱高膨脹鋼棒材和線材(Ni25.5、Cr15、Ti2、Mn1.5、Mo1.25、Si0.7、V0.3 | Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm) |
| BS ISO 15072-2000 | 公制細牙螺紋法蘭盤六角螺栓.小型系列.A級產品 | Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
| BS ISO 262-1999 | ISO普通米制螺紋.螺釘,螺栓和螺母的選用尺寸 | ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts |
| BS ISO 5894-2000 | 船舶與海上技術.用螺栓緊固蓋子的人孔 | Ships and marine technology - Manholes with bolted covers |
| BS ISO 8820-6-2007 | 道路車輛.熔斷體.單螺栓熔斷體 | Road vehicles - Fuse-links - Single-bolt fuse-links |
| BS ISO 885-2000 | 一般用途螺栓和螺釘.米制系列.頭下圓角半徑 | General purpose bolts and screws - Metric series - Radii under the head |
| BS ISO 8992-2005 | 緊固件.螺栓、螺釘、螺柱和螺母通用要求 | Fasteners - General requirements for bolts, screws, studs and nuts |
| BS M 85-1995 | 空運貨物設備.全向額定載荷容量為2225N(5000 1bf)或以上的雙頭螺栓系緊配件標識 | Air cargo equipment - Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22 250 N (5 000 lbf) or above |
| BS S 148-1969 | 僅用于鍛制螺栓的低鎳-鉻鋼棒規范 | Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only) |
| BS S 158-1977 | 鍛制螺栓和螺母的含1%鉻-鉬鋼棒規范 | Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts |
| BS SP 114-1955 | 航空用有眼螺栓(統一螺紋)規范 | Specification for eye bolts (Unified threads) for aircraft |
| 編號 | 中文名稱 | 英文名稱 |