| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 13411-5-2003 | 鋼絲繩終端設備 安全性 第5部分：U型螺栓絲夾 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| EN 1450-1996+A1-1998 | 塑料管道系統 玻璃增強熱固塑料(GRP)組件 螺栓法蘭連接的設計查驗試驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints |
| EN 1515-1-1999 | 法蘭和其連接件 螺栓連接 第1部分：螺栓連接的選擇 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
| EN 1515-2-2001 | 法蘭和其連接件 螺栓連接 第2部分：PN鋼法蘭用螺栓材料的分類 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
| EN 1665-1997+AC-1998 | 六角法蘭螺栓 重型系列 | Hexagon bolts with flange - Heavy series |
| EN 20225-1991 | 緊固件 螺栓、螺柱和螺母 尺寸代號和標注 | Fasteners; Bolts, screws, studs and nuts; Symbols and designation of dimensions (ISO 225:1983) |
| EN 20273-1991 | 緊固件 螺栓和螺釘用通孔 | Fasteners; Clearance holes for bolts and screws (ISO 273:1979) |
| EN 20898-7-1995 | 緊固件機械性能 第7部分：螺栓與螺釘?shù)呐ぞ卦囼?yàn)和最小扭矩公稱直徑1MM—10MM | Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm (ISO 898-7:1992) |
| EN 2357-1988 | 航空航天系列 操縱纜繩上鍛制耐腐蝕鋼柱頭螺栓端 尺寸和負載 | Aerospace series - Stud-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads |
| EN 24015-1991 | 六角頭螺栓 產品等級B級 細桿(桿徑近似等于中徑) | Hexagon head bolts; Product grade B; Reduced shank (shank diameter = pitch diameter) (ISO 4015:1979) |
| EN 2413-1995 | 航空航天系列 鍍鎘合金鋼制肩薄六角頭高精度公差柄短螺紋螺栓 分類：1100MPa(在環境溫 度下)/235℃ | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 2549-1995 | 航空航天系列 陽極氧化MOS2潤滑的鈦合金制普通六角頭緊公差標準柄短螺紋螺栓 等級：1100MPa（環境溫度）/ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 2583-1997 | 航空航天系列 NI-PH2601(鉻鎳鐵合金718)耐熱鎳基合金MJ螺紋螺栓 等級：1275MPa( 環境溫度)/650℃ 技術規 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ - Technical specification |
| EN 26157-1-1991 | 緊固件 表面缺陷 第1部分：螺栓、螺釘和螺柱一般要求 | Fasteners; surface discontinuities; Part 1: Bolts, srews and studs for general requirements (ISO 6157-1:1988) |
| EN 26157-3-1991 | 緊固件 表面缺陷 第3部分：螺栓、螺釘和螺柱的特殊要求 | Fasteners; surface discontinuities; part 3: bolts, srews and studs for special requirements (ISO 6157-3:1988) |
| EN 2859-1995 | 航空航天系列 鍍鎘合金鋼制標準六角頭緊公差普通柄短螺紋螺栓 等級：1100 MPa (環境溫度)/235℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 2870-1996+AC-1996 | 航空航天系列 陽極氧化鈦合金標準雙六角頭緊公差普通柄MoS2潤滑的短螺紋螺栓 等級：1100MPa(環境溫度)/31 | Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 2874-1996+AC-1996 | 航空航天系列 鈍化、耐熱鎳基合金制雙六角頭緊公差普通柄中長螺紋螺栓 等級：1550MPa(環境溫度)/315℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315℃ |
| EN 28839-1991 | 緊固件機械性能 有色金屬制造螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986) |
| EN 2887-1995 | 航空航天系列 鈍化耐腐蝕鋼標準六角頭螺全紋頭螺栓 等級： 600 MPa( 環境溫度)/425 ℃ | Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ℃ |
| EN 2888-1995 | 航空航天系列 鈍純化耐腐蝕鋼標準六角頭緊公差普通柄短螺紋螺栓 等級： 600 MPa(環境溫度)/425 ℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
| EN 2889-1995 | 航空航天系列 鍍鎘合金鋼標準六角頭緊公差普通柄短螺紋螺栓 等級：900MPa (環境溫度)/235℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ℃ |
| EN 2925-1994 | 航空航天系列 FE-PA92HT(A286)耐高溫鋼制長螺紋細柄雙六角頭螺栓 等級：900MPa(環境溫度)650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 2931-1994 | 航空航天系列 FE-PA92HT(A286)耐熱鋼制長螺紋細柄T形頭螺栓 等級：900MPa(環境溫度)650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ℃ |
| EN 2932-1996 | 航空航天系列 FE-PA92HT(A286)耐熱鋼鍍銀長螺紋細螺柄T形頭螺栓 級等： 900 MPa(環境溫度)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃ |
| EN 2933-1996 | 航空航天系列 NI-P100HT718)耐熱鎳基合金鍍銀長螺紋細螺柄T形頭螺栓 等級：1275 MPa(環境溫度)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
| EN 2934-1996 | 航空航天系列 合金NI-P100HT((鉻鎳鐵合金718)耐熱鎳基鍍銀長螺紋細螺柄T形頭螺栓 等級：1275 MPa(環境溫 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
| EN 2935-1996 | 航空航天系列 NI-P101HT(沃斯帕洛尹合金)耐熱鎳基合金鍍銀長螺紋細螺柄T形頭螺栓 等級：1210 MPa(環境溫 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 2936-1996 | 航空航天系列 合金NI-P101HT(沃斯帕洛尹合金)耐熱鎳基鍍銀長螺紋細螺柄T形頭螺栓 等級：1210 MPa(環境溫 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3006-1994 | 航空航天系列 FE-PA92HT(A286)耐熱鋼制細柄長螺紋六角頭螺栓 等級：900MPa（環境溫 度）650 ℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 3008-1998 | 航空航天系列 NI-P100HT(鉻鎳鐵合金718) 耐熱鎳基合金長螺紋細柄六角頭螺栓 等級：1275MPa(環境溫度)/650 | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ |
| EN 3010-1998 | 航空航天系列 NI-P101HT(沃斯帕洛尹合金)耐熱鎳基合金長螺紋細柄六角頭螺栓 等級：1210MPa(環境溫度)/730 | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3011-1998 | 航空航天系列 鍍銀NI-P101HT(沃斯帕洛尹合金)耐熱鎳基合金長螺紋細柄六角頭螺栓 等級：1210MPa(環境溫度) | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3052-1993 | 航空航天系列 鈍化耐熱及耐腐蝕鋼標準六角頭緊公差普通桿短螺紋螺栓 等級：1100MPa(環境溫度)/425℃ | Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425℃ (includes amendment A1:1993) |
| EN 3063-1994 | 航空航天系列 NI-P101HT耐熱鋼鎳基合金制中螺紋緊公差柄雙六角頭螺栓 等級： 1210MPa(環境溫度)730℃ | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3112-1995 | 航空航天系列 鍍鎘合金鋼全螺紋頭標準六角頭螺栓 分級：大氣壓為900 MPa（環境溫度） 235 ℃ | Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 3202-1995 | 航空航天系列 T形頭螺栓的孔和阱 設計標準 | Aerospace series - Holes and traps for T-head bolts - Design standard |
| EN 3379-1996 | 航空航天系列 合金NI-P101HT(Waspaloy 一種耐高溫?zé)徭嚮辖?耐熱鎳基中長螺紋緊公差柄雙六角螺栓 等級： | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3724-2003 | 航空航天系列 鈦合金TI-P64001 MoS2潤滑細柄長螺紋雙六邊頭螺栓 等級： 1100 MPa (環境溫度) | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient temperature) / Note: To be replaced by prEN 3724 (2003-05). |
| EN 3725-2003 | 航空航天系列 鈦合金 TI-P640001 MoS2潤滑盤頭六瓣槽普通柄長螺紋螺栓 等級：1100 MPa（環境溫度） | Aerospace series - Bolts, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient temparature) / Note: To be replaced by prEN 3725 (2003-05). |
| EN 3740-1996 | 航空航天系列 陽極氧化MoS2潤滑鈦合金短螺紋緊公差柄薄六角頭帶肩螺栓、等級：1100MPa(環境溫度）/315℃ | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 3818-2003 | 航空航天系列 TI-P640001鈦合金帶MJ螺紋用螺栓 等級： 1100 MPa（環境溫度） 技術規范 | Aerospace series - Bolts with MJ threads, in titanium alloy TI-P64001 - Classification: 1 100 MPa (at ambient temperature); Technical specification / Note: To be replaced by prEN 3818 (2003-05). |
| EN 3832-2003 | 航空航天系列 NI-P100HT (Inconel 718)耐熱鎳基合金、 雙六角頭細柄長螺紋螺栓 等級：1550 MPa（環境溫 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 3832 (2003-05). |
| EN 3833-2003 | 航空航天系列 NI-PH2601 (Inconel 718)耐熱鎳基合金、 MJ螺紋螺栓 等級：1550 MPa（環境溫度）650 ℃ | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃; Technical specification / Note: To be replaced by prEN 3833 (2003-05). |
| EN 3907-2003 | 航空航天系列 鈦合金TI-P640001, MoS2潤滑、雙六角頭普通柄長螺紋螺栓 等級：1100 MPa (環境溫度)/350℃ | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient temperature)/350℃ / Note: To be replaced by prEN 3907 (2003-05). |
| EN 4009-2003 | 航空航天系列 耐熱鎳基合金 NI-P100HT (Inconel 718) 雙六角頭緊公差柄中長螺紋螺栓 等級：1550 MPa (常 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4009 (2003-0 |
| EN 4321-2003 | 航空航天系列 鍍銀耐熱鎳基合金 NI-PH2601 (Inconel 718)制 帶安全鎖線孔的細柄長螺紋雙六角頭螺栓 等級 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by |
| EN 4322-2003 | 航空航天系列 TI-P640001陽極氧化 MoS<(Index)2>涂層制鈦合金、帶安全鎖線孔的細柄長螺紋雙六角頭螺栓 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 100 MPa (at ambient temperature) / Note: To be replaced by prEN 4322 (2003-05). |
| EN 4352-2003 | 航空航天系列 MoS<(Index)2> 涂層制耐熱鎳基合金 NI-PH2601 (Inconel 718)、帶安全鎖線孔的細柄長螺紋雙六 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature)/425℃ / Note: To be rep |
| EN ISO 10664-1999 | 螺栓和螺釘用內板擰的六角花形 | Hexalobular internal driving feature for bolts and screws (ISO 10664:1999) |
| EN ISO 13918-1998 | 焊接 電弧螺栓焊用螺栓和陶瓷箍套 | Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998) |
| EN ISO 14555-1998 | 焊接 金屬材料的電弧螺栓焊 | Welding - Arc stud welding of metallic materials (ISO 14555:1998) |
| EN ISO 3506-1-1997 | 耐腐蝕不銹鋼緊固件的機械性能 第1部分：螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997) |
| EN ISO 4014-2000 | 六角頭螺栓 產品等級A和B級 | Hexagon head bolts - Product grades A and B (ISO 4014:1999) |
| EN ISO 4016-2000 | 六角頭螺栓 產品等級C級 | Hexagon head bolts - Product grade C (ISO 4016:1999) |
| EN ISO 4759-1-2000 | 緊固件公差 第1部分：螺栓、螺釘、螺柱和螺母 產品等級A、B和C級 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; product grades A, B and C (ISO 4759-1:2000) |
| EN ISO 4759-3-2000 | 緊固件公差 第3部分：螺栓、螺釘和螺母用平墊圈 產品等級A和C級 | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C (ISO 4759-3:2000) |
| EN ISO 8765-2000 | 米制細牙六角頭螺栓 產品等級A和B級 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999) |
| EN ISO 887-2000 | 米制普通螺栓、螺釘和螺母用平墊圈 總方案 | Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000) |
| EN ISO 898-1-1999 | 碳鋼和鑄鋼鑄造的緊固件機械性能 第1部分：螺栓、螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999) |
| EN ISO 9974-1-2000 | 通用和液壓傳動用聯接件 帶ISO 261 彈性螺紋或金屬 金屬密封的氣門和雙頭螺栓端頭 第1部分：螺紋氣門 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996) |
| EN ISO 9974-2-2000 | 通用和液壓傳動用聯接件 帶ISO 261 彈性螺紋或金屬 金屬密封的氣門和雙頭螺栓端頭 第2部分：彈性密封的 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN ISO 9974-3-2000 | 通用和液壓傳動用聯接件 帶ISO 261 彈性螺紋或金屬 金屬密封的氣門和雙頭螺栓端頭 第3部分：金屬 金屬 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
| prEN 10108-2000 | 冷成型螺母和螺栓用圓鋼棒 尺寸和公差 | Round steel rod for cold formed nuts and bolts - Dimensions and tolerances |
| prEN 14399-1-2002 | 預加載高強度結構螺栓 第1部分：一般要求 | High-strength structural bolting for preloading - Part 1: General requirements |
| prEN 14399-2-2002 | 預加載高強度結構螺栓 第2部分：預加載適用性試驗 | High-strength structural bolting for preloading - Part 2: Suitability test for preloading |
| prEN 14399-3-2002 | 預加載高強度結構螺栓 第3部分：HR系統 六角螺栓和螺母裝配件 | High-strength structural bolting for preloading - Part 3: System HR; Hexagon bolt and nut assemblies |
| prEN 14399-4-2002 | 預加載高強度結構螺釘 第4部分：HV系統 六角螺栓和螺母的裝配件 | High-strength structural bolting for preloading - Part 4: System HV; Hexagon bolt and nut assemblies |
| prEN 14420-3-2002 | 帶夾具的軟管配件 第3部分：銷式或螺栓式夾具 | Hose fittings with clamp units - Part 3: Clamp units, pinned or bolted |
| prEN 2549-1999 | 航空航天系列 潤滑電鍍鈦合金制的短螺紋精密配合公差標定柄標定六角頭螺栓 等級：大氣壓為1100 MPa/（環 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 2859-1999 | 航空航天系列 鍍鎘合金鋼標準六角頭緊公差普通柄短螺紋螺栓 等級：1100MPa(環境溫度)/235℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| prEN 2888-1999 | 航空航天系列 鈍化耐腐蝕鋼普通六角頭緊公差普通柄短螺紋螺栓 等級：600MPa (環境溫度)/425℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
| prEN 2889-1999 | 航空航天系列 鍍鎘合金鋼標準六角頭緊公差普通柄短螺紋螺栓 等級：900 MPa（環境溫度）235 ℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| prEN 3052-1999 | 航空航天系列 鈍化耐熱及耐腐蝕鋼標準六角頭緊公差普通桿短螺紋螺栓 等級：1100MPa(環境溫度)/425℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 3757-1998 | 航空航天系列 MoS2潤滑耐熱鋼、自鎖浮動自對中雙耳系緊螺栓螺母 等級： 900 MPa(環境溫度)/315℃ | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/315℃ |
| prEN 3820-1999 | 航空航天系列 陽極氧化MoS2潤滑的鈦合金、 標準六角頭松公差普通柄短螺紋螺栓 等級：1100 MPa（環境溫度 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4071-1999 | 航空航天系列 鋁 IVD涂層鈦合金標準六角頭緊公差普通柄短螺紋螺栓 等級：1100 MPa(環境溫度) /425℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4127-1999 | 航空航天系列 鈦合金鋁 IVD涂層、標準六角頭松公差普通柄短螺紋螺栓 等級：1100 MPa (環境溫度)/425 ℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4128-1999 | 航空航天系列 耐熱鎳基合金鋁 IVD涂層、標準六角邊頭松公差普通柄短螺紋螺栓 等級：1250 MPa (環境溫度)/ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425℃ |
| prEN 4172-1999 | 航空航天系列 陽極氧化耐鈦合金TI-P64001制突出頭剪式緊公差鎖緊螺栓 米制 等級：：1100 MPa (環境溫度) | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4173-1999 | 航空航天系列 陽極氧化耐鈦合金TI-P64001、100°埋頭孔普通頭剪式緊公差鎖緊螺栓 米制 等級：：1100 MPa | Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4176-1999 | 航空航天系列 陽極氧化或有鋁色涂層鈦合金TI-P64001、100°埋頭標準頭或突出頭的張力剪式緊公差鎖緊螺栓、 | Aerospace series - Lockbolts, 100?countersunk normal head or protruding head, tension-sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric |
| prEN 4312-1999 | 航空航天系列 帶鋁色涂層制 耐熱和耐腐蝕鋼、松公差異徑柄中等長度螺紋的雙頭螺栓 等級：1100 MPa (常溫 | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4401-1999 | 航空航天系列 米制有鋁色涂層鈦合金TI-P64001緊公差剪式突頭鎖緊螺栓 等級：1100 MPa (常溫)/315℃ | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4402-1999 | 航空航天系列 米制有鋁色涂層鈦合金TI-P64001緊公差剪式100度埋頭標準頭鎖緊螺栓 等級：1100 MPa (常溫)/ | Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4407-1997 | 航空航天系列 有IVD鋁涂層的鈦合金全螺紋頭標準六角螺栓 等級：1100 MPa(常溫)/315度 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4421-2000 | 航空航天系列 帶有耐腐鋼齒形鎖緊環的涂MoS2，TI-P64001鈦合金雙頭螺栓 強度等級：1100 MPa(環境溫度下) | Aerospace series - Studs, in titanum alloy TI-P64001, MoS<(Index)2> coated, with serrated locking ring, in corrosion resisting steel - Strength class: 1100 MPa (at ambient temperature) |
| prEN 4458-2000 | 航空航天系列 帶有耐腐鋼齒形鎖緊環的涂MoS2TI-P64001鈦合金、MJ螺紋雙頭螺栓 強度等級：1100 MPa(環境溫 | Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS<(Index)2> coated, with serrated locking ring in corrosion resisting steel - Strength class: 1100 MPa (at ambient temperature); Technical specification |
| prEN 4459-2000 | 航空航天系列 帶有耐腐鋼齒形鎖緊環的TI-P64001鈦合金雙頭螺栓 設計標準 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard |
| prEN 4460-2000 | 航空航天系列 帶有耐腐鋼齒形鎖緊環的TI-P64001鈦合金雙頭螺栓 安裝和拆卸程序 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure |
| prEN 4495-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋 標準六角頭螺栓 等級：1100 MPa (環境溫度下)/31 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4498-1999 | 航空航天系列 鋁涂層鈍化耐熱鎳基合金緊公差標準體中長螺紋大雙頭六角頭螺栓 等級：1550 MPa (環境溫度下 | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1550 MPa (at ambient temperature)/315℃ |
| prEN 4501-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋帶肩薄六角頭螺栓 等級：1100 MPa (環境溫度下)/31 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4506-1999 | 航空航天系列 規定條件下螺栓和螺帽間摩擦系數的測定 | Aerospace series - Determination of coefficients of friction of bolts and nuts under specified conditions |
| prEN 6110-2000 | 航空航天系列 不銹鋼100 平頭盲螺栓 | Aerospace series - Bolts, blind, 100?flush head, stainless steel |
| prEN 780-1992 | 寬平頭高強度結構螺栓用六角螺母 產品等級B 性能級別8和10 | Hexagon nuts for high-strength structural bolting with large width across flats; product grade B; property classes 8 and 10 |
| prEN 781-1992 | 寬平頭高強度結構螺栓用六角螺母（螺紋長度遵照ISO 888） 產品等級C 性能級別8.8和10.9 | Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888); product grade C; property classes 8.8 and 10.9 |
| prEN 782-1992 | 寬平頭高強度結構螺栓用六角螺母（短螺紋長度） 產品等級C 性能級別10.9 | Hexagon bolts for high-strength structural bolting with large width across flats (short thread length); product grade C; property class 10.9 |
| prEN 783-1992 | 寬平頭結構螺栓用六角螺母 類型1 產品等級B 性能級別10 | Hexagon nuts for structural bolting with large width across flats, style 1; product grade B; property class 10 |
| prEN 784-1995 | 高強度結構螺栓用平墊圈、硬度和韌度 | Plain washers for high-strength structural bolting, hardened and tempered |
| prEN 785-1995 | 高強度結構螺栓用平墊圈、導角、硬度和韌度 | Plain washers, chamfered, hardened and tempered for high-strength structural bolting |
| prEN ISO 10434-2002 | 石油和天然氣工業用螺栓帽狀鋼閘閥 | Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002) |
| 編號 | 中文名稱 | 英文名稱 |