| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 103-7-1972 | ISO 米制梯形螺紋.標稱直徑8～100mm螺栓螺紋的極限尺寸 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter |
| DIN 103-8-1972 | ISO 米制梯形螺紋.標稱直徑105至300mm螺栓螺紋的極限尺寸 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter |
| DIN 11014-1968 | 農業機械.米制螺紋、精制沉頭雙接口螺栓 | Agricultural equipment; countersunk double-nip bolts, sinkings, metric thread, finish |
| DIN 11015-1995 | 農業機械.帶短四角方凸臺的扁平埋頭螺栓 | Agricultural machinery - Flat countersunk square neck bolts with short square |
| DIN 11028-1999 | 農業用拖拉機和機械..拖車聯軸節.40聯接環用螺栓聯軸節 | Agricultural tractors and machinery - Trailer coupling - Bolt coupling for coupling-ring 40 |
| DIN 1211-3-2003 | 錯列人孔階梯腳扣.第3部分:螺栓連接的階梯腳扣 | Step irons for staggered manhole steps - Part 3: Bolted-on step irons |
| DIN 1212-3-2003 | 錯列人孔直立式階梯腳扣.第3部分:螺栓連接的階梯腳扣 | Step irons with upstand for staggered manhole steps - Part 3: Bolted-on step irons |
| DIN 1441-1974 | 螺栓用粗制墊圈 | Washers; Type Coarse for Bolts |
| DIN 1595-1978 | 有軌車輛的按鈕和按鈕螺栓 | Knobs and knobbed screws for rail vehicles |
| DIN 18069-1985 | 住宅的裝有承載螺栓的樓梯.設計和建造 | Stairs with load-bearing bolts for residential buildings; design and execution |
| DIN 186-1988 | 帶方頸部的T形頭螺栓 | T-head bolts with square neck |
| DIN 188-1987 | 帶雙凸邊的T形頭螺栓 | T-head bolts with double nib |
| DIN 20625-1-1992 | 礦山用軌控軌道裝置.繩索牽引和自行式軌道裝置用螺栓聯軸器.螺栓聯軸器30 | Capture-track rail installations in mining; bolted couplings for rope-hauled and self-propelled rail installations; bolted coupling 30 |
| DIN 21319-1989 | 礦山坑道用圓木.螺栓 | Round pit timber; bolts |
| DIN 21346-1989 | 導軸用的四方頭螺栓 | Square head bolts for shaft guides |
| DIN 22412-1986 | 有槽螺栓 | Slit-bolts |
| DIN 22416-1986 | 采礦用于預防潛在爆炸環境爆的電氣設備.三角頭螺栓.安全性要求和試驗 | Electrical apparatus for potentially explosive atmospheres in mining; triangular head bolts; safety requirements and testing |
| DIN 22424-1990 | 礦山預防潛在性爆炸氣體的電氣設備.三角頭螺栓 | Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts |
| DIN 24536-1985 | 煉鋼廠和軋鋼機用設備.在技術圖紙上帶錨盒的地腳螺栓和T 型頭螺栓的圖形符號 | Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings |
| DIN 24539-1-1985 | 冶金和軋鋼設備.按DIN261的T型頭螺栓用錨板.單塊錨板.尺寸、名稱、安裝深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth |
| DIN 24539-2-1985 | 冶金和軋鋼設備.按DIN261的T 型頭螺栓用錨板.雙錨板.尺寸、名稱、安裝深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth |
| DIN 2510-1 Bb.-1974 | 帶減縮刀柄的螺栓連接件的測量和安裝.第7部分:螺栓連接件計算的相關研究 | Bolted connections with reduced shank, survey and installation; studies relating to the calculation of bolted connections |
| DIN 2510-1-1974 | 帶減縮刀柄的螺栓連接件.第1部分:綜述.應用范圍和安裝示例 | Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation |
| DIN 2510-2-1971 | 帶縮徑桿的螺栓連接件.帶大間隙的米制螺紋.標稱尺寸和極限尺寸 | Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits |
| DIN 2510-3-1971 | 帶縮徑桿的螺栓連接件.雙頭螺柱 | Bolted Connections with Reduced Shank; Stud-bolts |
| DIN 2510-4-1971 | 帶縮徑桿的螺栓連接件.螺柱 | Bolted Connections with Reduced Shank; Studs |
| DIN 2510-5-1971 | 帶縮徑桿的螺栓連接件.六角螺母 | Bolted Connections with Reduced Shank; Hexagon Nuts |
| DIN 2510-6-1974 | 帶減縮刀柄的螺栓連接件.第8部分:螺母 | Bolted Connections with Reduced Shank; Cap Nuts |
| DIN 2510-7-1971 | 帶減縮刀柄的螺栓連接件.第7部分:延伸式套管 | Bolted Connections with Reduced Shank; Extension Sleeves |
| DIN 2510-8-1971 | 帶縮徑桿的螺栓連接件.螺桿用的螺紋孔 | Bolted Connections with Reduced Shank; Threaded Holes for Studs |
| DIN 25192-1978 | 鐵路車輛用T 形頭螺栓錘頭螺栓） | T-head bolts (hammer head bolts) for railway vehicles |
| DIN 25193-2003 | 鐵路車輛.帶ISO米制螺紋的菌頭地腳螺栓.C級 | Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C |
| DIN 25195-2003 | 鐵路車輛.帶ISO米制螺紋的雙接口沉頭螺栓.C級 | Railway vehicles - Countersunk bolts with double nip with metric ISO thread - Class C |
| DIN 25200-1997 | 鐵路車輛用螺釘、螺栓和螺母.一覽表 | Screws, bolts and nuts for rail vehicles - Summary |
| DIN 25201-1-2004 | 鐵路車輛及其組件的設計指南.螺栓連接.第1部分:螺栓連接的分類 | Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints |
| DIN 25201-2 Berichtigung 1-2007 | 鐵道車輛及其組件的設計指南.螺栓連接.第2部分:設計.機械應用.DIN 25201-2:2006-04的勘誤 | Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical application, Corrigenda to DIN 25201-2:2006-04 |
| DIN 25201-2-2006 | 鐵路車輛及其組件的設計指南.螺栓連接.第2部分:設計.機械應用 | Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical application |
| DIN 25201-3-2004 | 鐵路車輛及其組件的設計指南.螺栓連接.第3部分:設計.電氣應用 | Design guide for railway vehicles and their components - Bolted joints - Part 3: Design - Electrical application |
| DIN 25201-4-2004 | 鐵路車輛及其組件的設計指南.螺栓連接.第4部分:螺栓連接的安全 | Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints |
| DIN 25201-5-2005 | 鐵路車輛及其組件的設計指南.螺栓連接.第5部分:防腐蝕 | Design guide for railway vehicles and their components - Bolted joints - Part 5: Protection against corrosion |
| DIN 25201-6-2005 | 鐵路車輛及其組件的設計指南.螺栓連接.第6部分:連接尺寸 | Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions |
| DIN 25201-7 Berichtigung 1-2007 | 鐵路車輛及其組件的設計指南.螺栓連接件.第7部分:安裝.DIN 25201-7-2004技術勘誤 | Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation, Corrigenda to DIN 25201-7:2004-06 |
| DIN 25201-7-2004 | 鐵路車輛及其組件的設計指南.螺栓連接.第7部分:安裝 | Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation |
| DIN 26029-1-1986 | 槽車.排氣孔和閉鎖螺栓.底部壓氣卸載槽車 | Tank wagons; vent holes and drain plugs on pressurized gas tank wagons with bottom discharge |
| DIN 26029-2-1986 | 槽車.排氣孔和閉鎖螺栓.傾斜罐槽車 | Tank wagons; vent holes and drain plugs on tank wagons with indined tanks |
| DIN 261-1987 | T形頭螺栓 | T-head bolts |
| DIN 267-13-2007 | 緊固件.技術規范.第13部分:在-200℃～700℃溫度范圍使用的具有特殊機械性能螺栓連接件用部件 | Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C |
| DIN 267-26-2005 | 緊固件.技術規范.第26部分:螺栓連接件用錐形彈簧墊圈 | Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections |
| DIN 267-27-2004 | 緊固件.帶粘附層的鋼制螺釘、螺栓和螺柱技術規范 | Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications |
| DIN 267-28-2004 | 緊固件.第28部分:帶壓緊層的鋼制螺釘、螺栓和螺柱.技術規范 | Fasteners - Part 28: Steel screws, bolts and studs with locking coating; Technical specifications |
| DIN 267-29-1993 | 緊固件.在-200℃～+700℃溫度范圍使用的螺栓連接件的產品等級 | Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C |
| DIN 28602-2000 | 球墨鑄鐵管及管件.栓接壓蓋密封接頭.組件、套管、中間環、密封圈、螺栓和螺母 | Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts |
| DIN 29732-3-1984 | 航空航天.帶凸頭的單向剪切鈦合金緊公差螺栓用靜載荷鉚接計算值 | Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear |
| DIN 29733-3-1984 | 航空航天.沉頭的單向剪切鈦合金緊公差螺栓用靜載荷鉚接計算值 | Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear |
| DIN 3017-3-2002 | 軟管卡箍.第3部分:螺栓卡箍 | Hose clamps - Part 3: Bolt clamps |
| DIN 34800-2005 | 帶小凸緣的外六角驅動的螺栓和螺釘 | Bolts and screws with external hexalobular driving feature with small flange |
| DIN 34801-1999 | 大凸緣六角頭驅動螺栓及螺釘 | Bolts and screws with external hexalobular driving feature with large flange |
| DIN 34803-2001 | 螺栓、螺釘和雙頭螺栓開口銷與線孔 | Split pin holes and wire holes for bolts, screws and studs |
| DIN 34824-2007 | 螺栓和螺釘用12孔座 | 12 point socket for bolts and screws |
| DIN 37082-1975 | 制動踢片的調節裝置.彈簧螺栓的壓力彈簧. | Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt |
| DIN 3853-2001 | 非釬焊和釬焊壓合接頭.與管接螺母使用的雙頭螺栓端部.設計圖 | Non-soldering and soldering compression fittings - Stud ends for use with union nut; Design sheet |
| DIN 3903-2001 | 帶有切割環的非焊接壓縮配件.帶錐形螺紋末端的肘形螺栓(不用于新設計) | Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design) |
| DIN 3906-2001 | 帶有切割環的非焊接壓縮配件.帶錐形螺紋末端的分支T形螺栓(不用于新設計) | Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design) |
| DIN 3913-2001 | 帶有切割環的非焊接壓縮配件.帶錐形螺紋末端的活動T形螺栓(不用于新設計) | Non soldering compression fittings with cutting ring - Run T-stud with taper threaded stud end (not for new design) |
| DIN 3955-2001 | 帶切割環的非釬焊壓合接頭.柱螺栓端A型帶平行螺紋和軸桿的雙頭螺栓連接端 | Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel threads and shaft for stud ends type A |
| DIN 43043-2-1971 | 電動機械用帶3個螺栓雙夾緊刷握.主要尺寸 | Double clamping brush-holder with 3 bolts for electrical machinery; main dimensions |
| DIN 43119-1-1981 | 第1部分:架空器材接觸線夾用旋轉式螺栓 | Revolving bolts for contact wire clamp for overhead equipment |
| DIN 43119-2-1983 | 架空設備的接觸導線用旋轉螺栓.帶螺紋的旋轉螺栓 | Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread |
| DIN 43142-1976 | 螺栓、有槽接觸線用接觸線夾 | Contact wire clamps for screwbolts, for grooved contact wire |
| DIN 43144-1976 | 旋轉螺栓、有槽接觸線用接觸線夾 | Contact wire clamps for revolving bolts, for grooved contact wire |
| DIN 43167-2-1987 | 工作電壓為交流1000V以下、直流1500V以下架空接觸線用棒式絕緣子.帽、U型螺栓和鉤頭螺栓 | Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt |
| DIN 43675-1-1975 | 第1部分:變壓器用額定值在 400 和 3150 A 之間的連接螺栓和電壓小于 60 kV 穿墻套管的矩形斷面連接器 | Rectangular-section connectors for terminal studs rated between 400 and 3150 A for power transformer- and wallbushings below 60 kV |
| DIN 43675-2-1984 | 柱螺栓用連接件.戶外變壓器套管的扁連接件.Um24和36KV.5和8kA | Connectors for terminal studs; flat connectors for outdoor transformer bushings; U<(Index)m> 24 and 36 kV, 5 and 8 kA |
| DIN 43675-3-1975 | 第3部分:交流發電機套管額定值大于 3150 A 的連接螺栓用矩形斷面連接器 | Rectangular-section connectors for terminal studs rated over, 3150 A, for alternator-bushings |
| DIN 43854-1979 | 電度表的鉛封螺栓 | Sealing bolts for watthour meters |
| DIN 444-1983 | 吊環螺栓 | Eyebolts |
| DIN 46008-1987 | 接地連接螺栓的扁平接觸表面.額定電壓不超過52KV | Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV |
| DIN 46200-1977 | １·６ＫＡ以下導電連接螺栓.電流強度的設計和給定 | Current carrying connection bolts up to 1600 A; design and assignment of current intensities |
| DIN 4626-1986 | 疊層簧中心螺栓 | Center bolts for laminated leaf springs |
| DIN 46260-1-1988 | 低壓用螺栓接線柱.第1部分:組裝 | Low-voltage stud-terminals; compilation |
| DIN 46260-2-1988 | 低壓用螺栓接線柱.第2部分:零件清單 | Low-voltage stud-terminals; part list |
| DIN 46262-1-1988 | 低壓用螺栓接線柱.第1部分:絕緣子 | Low-voltage stud-terminals; insulators |
| DIN 46262-2-1988 | 低壓用螺栓接線柱.第2部分:套管螺栓 | Low-voltage stud-terminals; bushing studs |
| DIN 46262-4-1988 | 低壓用螺栓接線柱.第4部分:開口環、.鉤環、墊圈、墊片 | Low-voltage stud-terminals; snap rings, shackles, washers, shims |
| DIN 46295-1-1985 | 帶６個開口螺栓的矩形接線板.主要尺寸 | Terminal board, square shaped with six slit-bolts; main dimensions |
| DIN 46295-2-1981 | 帶６個開口螺栓的矩形接線板.附件 | Terminal board, square shaped with six slit-bolts; accessories |
| DIN 46295-3-1981 | 帶有６個開口螺栓的矩形端子板.電纜端頭 | Terminal board, square shaped with six slit-bolts; cable sockets |
| DIN 46300-1980 | 安裝器材.把電度表和控制裝置安裝在表盤上用螺栓 | Mounting material; mounting bolt for electric meters and controlgear on meter panels |
| DIN 475-1-1984 | 第1部分:螺栓、螺釘、閥門和配件用扳手開口度 | Widths across flats for bolts, screws, valves and fittings |
| DIN 478-1985 | 方頭帶肩螺栓 | Square head bolts with collar |
| DIN 479-1985 | 短螺栓末端的圓柱軸頸止端的方頭螺栓 | Square head bolts with short dog point |
| DIN 480-1985 | 帶肩和半圓柱軸頸止端的方頭螺栓 | Square head bolts with collar and oval half dog point |
| DIN 48065-3-1980 | 架空線路的連接螺栓用帶保護裝配連接件的球形環 | Ball eyes with protective fitting attachment, for connection bolts, for overhead power lines |
| DIN 48073-1975 | 架空電力線的連接螺栓 | Connecting bolts for overhead power lines |
| DIN 48078-1-1985 | 耦合到搭接線側連接螺栓的架空線用U形搭接線 | Clevis straps for overhead lines, for coupling to connecting bolts on the strap side |
| DIN 48078-2-1985 | 耦合到搭接線側U形螺栓的架空線用U形搭接線 | Clevis straps for overhead lines, for coupling to U-bolts on the strap side |
| DIN 48088-2-1985 | 接地的接點和短路設備.連接接地一邊帶環型槽圓柱形螺栓 | Connecting point for earthing and short-circuiting devices; cylinder bolt and annuar slot for earth-side connection |
| DIN 48351-2-1967 | A形天線桿.第2部分:螺栓、螺母、墊圈 | A-masts; bolts, nuts, washers |
| DIN 529-1986 | 磚石工程和地基用螺栓 | Masonry and foundation bolts |
| DIN 580-2003 | 有眼螺栓 | Eye bolts |
| DIN 58460-1978 | 精密機械用柱螺栓 | Studs for fine mechanics |
| DIN 58461-1978 | 精密機械用帶頸柱螺栓 | Studs with rim for fine mechanics |
| DIN 58462-1978 | 精密機械用帶槽柱螺栓 | Studs with groove for fine mechanics |
| DIN 58463-1978 | 精密機械用帶頸和槽的柱螺栓 | Studs with rim and groove for fine mechanics |
| DIN 58464-1978 | 精密機械用有頭柱螺栓 | Studs with head for fine mechanics |
| DIN 58469-1978 | 精密機械用帶螺紋柱螺栓 | Studs with thread for fine mechanics |
| DIN 58471-1978 | 精密機械用帶六角頭螺紋和槽的柱螺栓 | Studs with hexagon, thread and groove for fine mechanics |
| DIN 58472-1978 | 精密機械用帶頭和螺紋的柱螺栓 | Studs with head and thread for fine mechanics |
| DIN 58520-1-1994 | 繪圖儀器用螺釘.第1部分:T 型螺栓 | Screws for drawing instruments; part 1: T-bolts |
| DIN 603-1981 | 方頸扁圓頭螺栓 | Mushroom head square neck bolts |
| DIN 604-1981 | 平沉頭尖螺栓 | Flat countersunk nib bolts |
| DIN 605-1981 | 平沉頭長方頸螺栓 | Flat countersunk square neck bolts, with long square |
| DIN 607-1981 | 半圓頭尖螺栓 | Cup head nib bolts |
| DIN 608-1981 | 平沉頭短方頸螺栓 | Flat countersunk square neck bolts, with short square |
| DIN 609-1995 | 六角頭長螺紋配合螺栓 | Hexagon fits bolts with long thread |
| DIN 6304-2002 | 帶固定卡式螺栓的定位銷釘 | Tommy screws with fixed clamping bolt |
| DIN 6305-2002 | 帶固定卡式螺栓的螺絲旋桿螺母 | Tommy nuts with fixed clamping bolt |
| DIN 6306-2002 | 帶移動卡式螺栓的定位銷釘 | Tommy screws with movable clamping bolt |
| DIN 6307-2002 | 帶移動卡式螺栓的螺絲旋桿螺母 | Tommy nuts with movable clamping bolt |
| DIN 65110-1984 | 航空和航天.螺釘和螺栓的十二角頭 | Aerospace; bihexagonal heads for screws and bolts |
| DIN 65115-1986 | 航空和航天.帶MJ螺紋、縮頸、標稱抗拉強度1100MPa、溫度235 ℃以下 、鋼制六角頭螺栓 | Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65121-1992 | 航空航天.螺栓、螺釘、螺母和有關零件.供車間查看的產品一覽表和選用.不適用于新設計 | Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design |
| DIN 65177-1986 | 航空和航天.帶MJ螺紋、縮頸、標稱抗拉強度1100MPa、溫度315 ℃以下 、鈦合金制六角頭螺栓 | Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C |
| DIN 65179-1993 | 航空航天.使用溫度315℃以下公稱抗拉強度1100MPa的鈦合金制短螺紋長度MJ螺紋帶內補償十字形筋狀傳動結構的 | Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65265-1998 | 航空航天.鈦合金制螺紋接近頂部的MJ螺紋六角頭螺栓.使用溫度315℃及其以下，公稱抗拉強度1100MPa | Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65268-1986 | 航空和航天.MJ 螺紋、短螺紋、鈦合金制、溫度315℃以下、標稱抗拉強度1100MPa 六角頭螺栓. | Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65313-1987 | 航空航天.公稱抗拉強度1100MPa使用溫度為425℃以下的耐腐蝕鋼制全螺紋的MJ螺紋的帶有筋狀翼形的扭矩調節盤 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65314-1998 | 航空和航天.鋼制短螺紋長度MJ螺紋的帶內補償十字槽筋狀傳動機構的緊公差沉頭螺栓.使用溫度235℃及其以下， | Aerospace - Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel - Nominale tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65316-1993 | 航空航天.使用溫度425℃以下公稱抗拉強度1100MPa的耐蝕鋼制短螺紋長度MJ螺紋帶內補償十字形筋狀傳動結構的 | Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65318-1987 | 航空航天.公稱抗拉強度1100MPa使用溫度為235℃以下的鋼制短長度MJ螺紋的帶有筋狀翼形的扭矩調節十字槽頭盤 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C |
| DIN 65319-1987 | 航空航天.公稱抗拉強度1100MPa使用溫度為425℃以下的耐腐蝕鋼制短長度MJ螺紋的帶有筋狀翼形的扭矩調節十字 | Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65320-1993 | 航空航天.使用溫度235℃以下公稱抗拉強度1100MPa的鋼制短螺紋長度MJ螺紋帶內補償十字形筋狀傳動結構的緊公 | Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65324-1993 | 航空航天.使用溫度315℃以下公稱抗拉強度1100MPa的鈦合金制短長度MJ螺紋帶內補償十字形筋狀傳動結構的緊公 | Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65330-1987 | 航空航天.公稱抗拉強度1100MPa使用溫度為235℃以下的鋼制短長度MJ螺紋的六角頭螺栓. | Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65338-1993 | 航空航天.使用溫度315℃以下公稱抗拉強度1100MPa的鈦合金制帶肩的短長度MJ螺紋緊公差六角頭螺栓 | Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65339-1998 | 航空航天.耐腐蝕鋼制帶短長度MJ螺紋的緊公差六角頭螺栓.使用溫度425℃及其以下，公稱抗拉強度1100MPa | Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65438-1993 | 航空航天.使用溫度315℃以下公稱抗拉強度1100MPa的鈦合金制短螺紋長度的MJ螺紋緊公差十二角頭螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65439-1984 | 航空和航天.MJ螺紋、緊公差、中等長度螺紋、鋼制、標稱抗拉強度1250MPa、溫度235 ℃以下的十二角頭螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C |
| DIN 65440-1984 | 航空和航天.帶MJ螺紋、緊公差、中等長度螺紋、耐蝕鋼制、標稱抗拉強度1250MPa、溫度315 ℃以下的十二角頭螺 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 °C |
| DIN 65441-1984 | 航空和航天.帶MJ螺紋、緊公差、中等長度螺紋、鋼制、標稱抗拉強度1550MPa、溫度235 ℃以下的十二角頭螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 °C |
| DIN 65442-1993 | 航空航天.使用溫度315℃以下公稱抗拉強度1550MPa耐蝕鎳合金制中長等度MJ螺紋的緊公差十二角頭螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 °C |
| DIN 65443-1984 | 航空和航天.帶MJ螺紋、緊公差、中等長度螺紋、鋼制、標稱抗拉強度1800MPa、溫度235 ℃以下的十二角頭螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 °C |
| DIN 65515-1984 | 航空和航天.帶內細齒和MJ螺紋、短螺紋、鈦合金制、標稱抗拉強度1100MPa、溫度315℃以下凸圓頭螺栓. | Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65516-1984 | 航空和航天.帶內細齒和MJ螺紋、短螺紋、鋼制、標稱抗拉強度900MPa、溫度235℃以下凸圓頭螺栓. | Aerospace; cheese head bolts with internal serration thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65517-2002 | 航空航天.溫度可達315℃的標稱抗拉強度為1100MPa的鈦合金短螺紋帶內雙六角和MJ螺紋的緊公差圓頭螺栓 | Aerospace - Cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65523-1984 | 航空和航天.帶MJ螺紋的、短螺紋、耐蝕鋼制、標稱抗拉強度700MPa、溫度425℃以下的六角頭螺栓 | Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65524-1984 | 航空和航天.帶MJ螺紋的、短螺紋、鋼制、標稱抗拉強度900MPa、溫度235℃以下的六角頭螺栓 | Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65525-1992 | 航空航天.使用溫度235℃以下公稱抗拉強度1100MPa 鋼制MJ短螺紋的緊公差六角頭螺栓 | Aerospace; bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65526-1998 | 航空航天.鈦合金制帶短長度MJ螺紋的緊公差六角頭螺栓.使用溫度315℃及其以下，公稱抗拉強度1100MPa | Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65527-1984 | 航空和航天.帶MJ螺紋的、短螺紋、鋼制、標稱抗拉強1100MPa、溫度235℃以下、緊公差六角頭螺栓 | Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C |
| DIN 65533-1987 | 航空航天.螺栓、螺釘和螺母.材料的分配及表面處理.推薦性選擇 | Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection |
| DIN 65537-1987 | 航空航天.公稱抗拉強度1250MPa使用溫度為315℃/425℃以下的鎳合金制短長度MJ螺紋的帶雙六角套筒的凸圓頭螺 | Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65538-1987 | 航空和航天.公稱抗拉強度1250MPa使用溫度為315℃/425℃以下的鎳合金制短長度MJ螺紋的帶雙六角套筒的緊公差 | Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65541-1987 | 航空和航天.公稱抗拉強度1250MPa使用溫度為315℃/425℃以下的鎳合金制全攻螺紋的MJ螺紋的帶有筋狀翼形的扭 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65554-1987 | 航空航天.公稱抗拉強度1100MPa使用溫度為425℃以下的耐腐蝕鋼制短長度MJ螺紋的帶有筋狀翼形扭矩調節十字槽 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65555-1987 | 航空航天.公稱抗拉強度1100MPa使用溫度為425℃以下的耐腐蝕鋼制短長度MJ螺紋的六角頭螺栓. | Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65736-1-1984 | 航空航天.材料1.1174.7和1.4544.9單向剪切沉頭螺栓靜載荷的螺栓計算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.1174.7 and 1.4544.9 |
| DIN 65736-3-1984 | 航空和航天.材料1.7220.5單向剪切沉頭螺栓靜載荷的螺栓計算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.7220.5 |
| DIN 65736-5-1984 | 航空航天.材料1.4944.4和1.7734.5單向剪切沉頭螺栓靜載荷的螺栓計算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.4944.4 and 1.7734.5 |
| DIN 65736-7-1984 | 航空航天.材料1.6604.6單向剪切沉頭螺栓靜載荷的螺栓計算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.6604.6 |
| DIN 6796-1987 | 螺栓和螺母用螺旋彈簧墊圈 | Conical spring washers for bolt/nut assemblies |
| DIN 6917-1989 | “工”字形鋼型材高強度螺栓連接用的方錐形墊圈 | Square taper washers for high-strength structural bolting of steel I sections |
| DIN 6918-1990 | 鋼結構U型梁高強度螺栓連接用四角楔形墊圈 | Square taper washers for high-strength structual bolting of steel channel sections |
| DIN 70613-1989 | 汽車制造.小寬度扳手開口度六角頭螺栓(不適于新結構) | Automotive engineering; hexagon head bolts with small widths across flats (not for new constructions) |
| DIN 7349-1974 | 帶重型夾緊套的螺栓用平墊圈 | Plain Washers for Bolts with Heavy Clamping Sleeves |
| DIN 74051-1-1989 | 汽車和掛車的機械連接.自動螺栓聯軸節40.尺寸和計算數據 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; dimensions and calculating data |
| DIN 74052-1-1989 | 牽引車和掛車的機械連接.第1部分:50 mm 自動螺栓聯軸節的尺寸和計算數據 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 50; dimensions and calculating data |
| DIN 7424-1989 | 機器操作安裝六角頭螺栓用的帶六角傳動延伸部分的套筒板手 | Socket wrenches with hexagon drive extension for hexagon bolts, machine operated |
| DIN 74361-1-1989 | 汽車和掛車用輻板式車輪.第1部分:螺栓定心的連接尺寸 | Disc wheels for motor vehicles and trailers; connection dimensions for bolt centering |
| DIN 74361-2-1982 | 汽車和掛車的盤式車輪.柱螺栓定心的緊固件 | Disc wheels for motor vehicles and trailers; fasteners for stud centring |
| DIN 74362-1-1982 | 卡車及客車掛車用帶有8個螺栓安裝的車輪偏置盤用制動鼓.最大外廓 | Brake drums for offset disc wheels of truck and bus trailers with 8 bolt mounting; maximum outline |
| DIN 74362-10-1980 | 使用10個螺栓連接商用車輛及其掛車用插入式盤形車輪制動鼓.第10部分:最大外廓 | Brake drums for inset disk wheels of commercial vehicles and their trailers with 10 bolt fastening; maximum outline |
| DIN 74362-2-1982 | 卡車及客車掛車用帶有10個螺栓安裝的偏置盤式車輪用制動鼓.最大外廓 | Brake drums for offset disc wheels of truck and bus trailers with 10 bolt mounting; maximum outline |
| DIN 74362-3-1982 | 卡車及客車掛車用帶有8個或10個螺栓安裝的非偏置盤式車輪用制動鼓.最大外廓 | Brake drums for disc wheels without offset of truck and bus trailers with 8 or 10 bolt mounting; maximum outline |
| DIN 74362-4-1982 | 卡車及客車掛車用帶有8個螺栓安裝的偏置盤式車輪用制動鼓.最大外廓 | Brake drums for offset disc wheels of commercial vehicles with 8 bolt mounting; maximum outline |
| DIN 74362-5-1982 | 商業車輛用帶有10個安裝螺栓的偏置盤式車輪用制動鼓.最大外廓 | Brake drums for offset disc wheels of commercial vehicles with 10 bolt mounting; maximum outline |
| DIN 74362-6-1982 | 商業車輛用帶有8個或10個安裝螺栓的非偏置盤式車輪用制動鼓.最大外廓 | Brake drums for disc wheels without offset of commercial vehicles with 8 or 10 bolt mounting; maximum outline |
| DIN 74362-7-1987 | 輪輞直徑標記15用6個或10個螺栓安裝的非偏置盤式車輪用制動鼓.最大外廓 | Brake drums for disc wheels with rim diameter designation 15 without offset for 6 or 10 bolt mounting, maximum outline |
| DIN 74362-8-1987 | 輪輞直徑標記15用6個或10個螺栓安裝的偏置盤式車輪用制動鼓.最大外廓 | Brake drums for offset disc wheels rim diameter designation 15 for 6 or 10 bolt mounting; maximum outline |
| DIN 74363-1-1982 | 帶有5個安裝螺栓、節圓直徑為112 mm (BZ 5 112)的客運掛車的制動鼓.最大外廓 | Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 112 mm (BZ 5 112); maximum outline |
| DIN 74363-2-1982 | 帶有5個安裝螺栓、節圓直徑為120 mm (BZ 5 120)的客運掛車的制動鼓.最大外廓 | Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 120 mm (BZ 5 120); maximum outline |
| DIN 7644-1985 | 帶球形襯的壓接管接頭.環形套管的插樁式鼓形螺栓 | Compression couplings with spherical liner; male studed banjo bolts for ring type nipples |
| DIN 78-2001 | 螺栓尾部的凸度 | Protrusions of bolt ends |
| DIN 787-2005 | T型槽用螺栓和螺釘 | Bolts and screws for T-slots |
| DIN 7968-2007 | 鋼結構用帶六角螺母的六角頭配合螺栓 | Hexagon fit bolts with hexagon nut for steel structures |
| DIN 7969-2007 | 鋼結構用帶六角螺母的帶槽沉頭螺栓 | Slotted countersunk head bolts with hexagon nut for steel structures |
| DIN 797-1970 | 專用地腳螺栓 | Special Foundation Bolts |
| DIN 7990-2007 | 鋼結構用帶六角螺母的六角頭螺栓 | Hexagon head bolts with hexagon nut for steel structures |
| DIN 7992-1970 | 大頭T 形頭螺栓 | T-head Bolts with Large Head |
| DIN 7999-1983 | 結構鋼螺栓裝配用的帶大寬度對邊的高強度六角頭配合螺栓 | High strength hexagon fit bolts with large widths across flats for structural steel bolting |
| DIN 81421-1-1977 | 第1部分:螺栓連接式設備用帶形把手 | Strap-shaped handles for equipment, type for bolted |
| DIN 81698-1973 | 吊環螺栓.米制螺紋 | Eye bolts; metric thread |
| DIN 835-1995 | 雙頭螺栓.旋入端（約）2d | Studs - Metal end 2 d |
| DIN 931-2-1987 | M 42 - M 160 x 6 的六角頭螺栓.第2部分:產品等級 B | M 42 to M 160 × 6 hexagon head bolts; product grade B |
| DIN 938-1995 | 雙頭螺栓.旋入端（約）1d | Studs - Metal end 1 d |
| DIN 939-1995 | 雙頭螺栓.旋入端 （約）1.25d | Studs - Metal end 1,25 d |
| DIN 940-1995 | 雙頭螺栓.旋入端（約）2.5d | Studs - Metal end 2,5 d |
| DIN 949-1-1995 | 米制干涉配合螺紋MFS的雙頭螺栓.第1部分:旋合長度（約）2d(A型) | Studs with metric interference thread MFS - Part 1: Lengths of engagement 2 d (Type A) |
| DIN 949-2-1995 | 米制干涉配合螺紋MFS的雙頭螺栓.第2部分:旋合長度（約）2.5d(B型) | Studs with metric interference thread MFS - Part 2: Lengths of engagement 2,5 d (Type B) |
| DIN 95363-1994 | 彈性體固定件.A 型至 F 柱螺栓選固定件 | Elastomer mounts; stud mounts; types A to F |
| DIN 962-2001 | 螺栓、螺釘、雙頭螺栓和螺母.標識、型號和精整 | Bolts, screws, studs and nuts - Designation, types and finishes |
| DIN 974-2-1991 | 六角螺栓、螺釘和螺母用沉頭孔直徑.制造尺寸 | Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions |
| DIN 976-1-2002 | 螺栓.第1部分:米制螺紋 | Stud bolts - Part 1: Metric thread |
| DIN 976-2-1995 | 螺栓.第2部分:公制干涉螺紋 MFS | Stud bolts - Part 2: Metric interference thread MFS |
| DIN CEN/TS 1591-4-2007 | 法蘭及其連接件.帶墊圈圓形法蘭連接件的設計原則.第4部分:服從壓力設備指令按設備尺寸做的螺栓連接件裝配職 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007 |
| DIN EN 10319-2-2007 | 金屬材料.拉伸應力松弛試驗.第2部分:螺栓接合模型規程 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models; English version of DIN EN 10319-2:2007-01 |
| DIN EN 12051-1999 | 建筑五金.門窗用螺栓.要求和試驗方法 | Building hardware - Door and window bolts - Requirements and test methods; German version EN 12051:1999 |
| DIN EN 13411-5-2003 | 鋼絲繩端頭.安全.第5部分:U形螺栓繩卡 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire grips; German version EN 13411-5:2003 |
| DIN EN 14219 Berichtigung 1-2007 | 帶米制細距螺紋的六角法蘭面螺栓.小型系列.DIN EN 14219-2003技術勘誤 | Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003, Corrigenda to DIN EN 14219:2003-09; German version EN 14219:2003/AC:2007 |
| DIN EN 14219-2003 | 米制細牙螺紋六角法蘭面螺栓.小系列 | Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003 |
| DIN EN 14399-1-2006 | 預加負荷用高強度結構螺栓組件.第1部分:一般要求 | High-strength structural bolting assemblies for preloading - Part 1: General requirements English version of DIN EN 14399-1:2006-06 |
| DIN EN 14399-2-2006 | 預加負荷用高強度結構螺栓組件.第2部分:預加負荷的適合性試驗 | High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading English version of DIN EN 14399-2:2006-06 |
| DIN EN 14399-3-2006 | 預加負荷用高強度結構螺栓組件.第3部分:系統HR.六角螺栓和螺母組件 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies English version of DIN EN 14399-3:2006-06 |
| DIN EN 14399-4-2006 | 預加負荷用高強度結構螺栓組件.第4部分:系統HV.六角螺栓和螺母組件 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies English version of DIN EN 14399-4:2006-06 |
| DIN EN 14399-5-2006 | 預加負荷用高強度結構螺栓組件.第5部分:平墊圈 | High-strength structural bolting assemblies for preloading - Part 5: Plain washers (includes AC:2006) English version of DIN EN 14399-5:2006-06 |
| DIN EN 14399-6-2006 | 預加負荷用高強度結構螺栓組件.第6部分:普通倒角墊圈 | High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06 |
| DIN EN 1450-1999 | 塑料管道系統.玻璃纖維增強的熱固塑料部件(GFK).對采用螺栓固定的法蘭連接點的設計進行驗證的試驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998 |
| DIN EN 15048-1-2007 | 非預加載荷結構螺栓連接組件.第1部分:一般要求 | Non-preloaded structural bolting assemblies - Part 1: General requirements; German version EN 15048-1:2007 |
| DIN EN 15048-2-2007 | 非預加負荷結構的螺栓連接組件.第2部分:適宜性試驗 | Non-preloaded structural bolting assemblies - Part 2: Suitability test; German version EN 15048-2:2007 |
| DIN EN 1515-1-2000 | 法蘭及其連接件.螺栓連接.第1部分:螺栓連接的選擇 | Flanges and their joints - Bolting - Part 1: Selection of bolting; German version EN 1515-1:1999 |
| DIN EN 1515-2-2002 | 法蘭及其連接件.螺栓連接.第2部分:鋼法蘭用螺栓材料分類.PN標識; 德文版本 EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated; German version EN 1515-2:2001 |
| DIN EN 1515-3-2005 | 法蘭及其連接件.螺栓連接.第3部分:等級標注的鋼法蘭用螺栓材料的分類.德文版本 EN 1515-3-2005 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005 |
| DIN EN 15282-2007 | 釉瓷和搪瓷.水或市政和工業廢水及污水的儲存或處理用螺栓連接鋼罐的設計 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges; German version EN 15282:2007 |
| DIN EN 1662 Berichtigung 1-2007 | 帶法蘭的六角螺栓、小型系列.DIN EN 1662-1998技術勘誤 | Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997, Corrigenda to DIN EN 1662:1998-02; German version EN 1662:1997/AC:2007 |
| DIN EN 1662-1998 | 小系列帶法蘭的六角頭螺栓 | Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997 |
| DIN EN 1665 Berichtigung 1-2007 | 帶法蘭的六角螺栓.重型系列.DIN EN 1665-1998技術勘誤 | Hexagon bolts with flange, heavy series; German version EN 1665:1997, Corrigenda to DIN EN 1665:1998-11; German version EN 1665:1997/AC:2007 |
| DIN EN 1665-1998 | 重系列帶法蘭的六角螺栓 | Hexagon bolts with flange, heavy series; German version EN 1665:1997 |
| DIN EN 20273-1992 | 緊固件.螺栓和螺釘?shù)拈g隙孔(ISO 273-1979) | Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991 |
| DIN EN 20898-7-1995 | 緊固件的機械性能.第7部分:公稱直徑為 1 mm - 10 mm 的螺栓和螺釘?shù)呐ちυ囼灪妥钚∨ぞ?(ISO 898-7:1992); | Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995 |
| DIN EN 24015-1991 | 縮小釘桿的六角螺栓(桿直徑≈螺紋中徑).產品等級B(ISO 4015-1979) | Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991 |
| DIN EN 2413-1995 | 航空航天系列.鍍鎘合金鋼短螺紋緊公差薄頭六角肩形螺栓.等級:1100MPa(室溫)/235℃; 德文版本 EN 2413:1995 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995 |
| DIN EN 2549-2007 | 航空航天系列.加 MoS<下標2> 潤滑劑的陽極氧化鈦合金短螺紋公稱六角緊公差螺栓.等級:1100MPa(室溫)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
| DIN EN 26157-1-1991 | 緊固件.表面缺陷.符合一般要求的螺栓、螺釘和螺柱(ISO 6157-1-88) | Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 |
| DIN EN 26157-3-1991 | 緊固件.表面缺陷.特殊要求用螺栓、螺釘和螺柱 | Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 |
| DIN EN 2859-1995 | 航空航天系列.鍍鎘合金鋼短螺紋公稱六角緊公差螺栓.等級:1100MPa(室溫)/235℃; 德文版本 EN 2859:1995 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2859:1995 |
| DIN EN 28839-1991 | 緊固件的機械性能.有色金屬制造的螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991 |
| DIN EN 2925-1994 | 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 長螺紋輕柄十二角頭螺栓.等級:900 MPa (室溫)攝氏 650 度; 德文版 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2925:1994 |
| DIN EN 2931-1994 | 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 長螺紋輕柄T型頭螺栓.等級:900 MPa (室溫)攝氏 650 度; 德文版本 E | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2931:1994 |
| DIN EN 2933-1996 | 航空航天系列.高溫鎳基合金HI-P100HT(因康鎳718)長螺紋細桿T字頭螺栓.等級:1275 MPa(室溫)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996 |
| DIN EN 2934-1996 | 航空航天系列.高溫鎳基合金HI-P100HT(因康鎳718)長螺紋,細桿鍍銀T字頭螺栓.等級:1275 MPa(室溫)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996 |
| DIN EN 2935-1996 | 航空航天系列.高溫鎳基合金HI-P101HT(沃斯帕落伊合金)長螺紋細桿T字頭螺栓.等級:1210 MPa(室溫)/730℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996 |
| DIN EN 2936-1996 | 航空航天系列.高溫鎳基合金HI-P101HT(沃斯帕落伊合金)長螺紋細桿鍍銀T字頭螺栓.等級:1210 MPa(室溫)/730℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996 |
| DIN EN 3008-1998 | 航空航天系列.NI-P100HT(因康718)耐熱鎳基合金制長螺紋減輕桿的六角頭螺栓.等級:1275 MPa/650℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C; German version EN 3008:1998 |
| DIN EN 3009-1998 | 航空航天系列.NI-P100HT(因康718)耐熱鎳基合金制鍍銀的長螺紋減輕桿的六角頭螺栓.等級:1275 MPa/650℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998 |
| DIN EN 3010-1998 | 航空航天系列.NI-P101HT(Waspaloy)耐熱鎳基合金制長螺紋減輕桿的六角頭螺栓.等級:1210 MPa/730℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 °C; German version EN 3010:1998 |
| DIN EN 3011-1998 | 航空航天系列.NI-P101HT (Waspaloy)耐熱鎳基合金制鍍銀的長螺紋減輕桿的六角頭螺栓.等級:1210 MPa/730℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa/730 °C; German version EN 3011:1998 |
| DIN EN 3052-1994 | 航空航天.耐熱耐蝕鋼制鈍感化處理的短螺紋緊公差桿標準六角頭螺栓.等級:1100MPa(室溫)/425攝氏度 | Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C (includes amendment A1:1993); German version EN 3052:1993 + A1:1993 |
| DIN EN 3063-1994 | 航空航天系列.耐高溫鎳基合金 NI-P101HT(沃斯帕洛尹合金) 中長螺紋十二角緊公差螺栓.等級:1210MPa (室溫) | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994 |
| DIN EN 3202-1996 | 航空航天系列.T形頭螺栓放油孔和集油器.設計標準 | Aerospace series - Holes and traps for T-head bolts - Design standard; German version EN 3202:1995 |
| DIN EN 3379-1996 | 航空航天系列.高溫鎳基合金NI-P101HT(沃斯帕落伊合金)厚螺母用中螺紋十二角配合螺栓.等級:1210 MPa(室溫)/7 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996 |
| DIN EN 3444-2007 | 航空航天系列.鈍化處理的耐熱鎳基合金中長度螺紋緊公差標準螺桿的大雙六角頭螺栓.等級:1250MPa(室溫)/650℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature)/650 °C; German and English version EN 3444:2006 |
| DIN EN 3724-2005 | 航空航天系列.MoS2涂覆的鈦合金TI-P64001制長螺紋細桿雙六角頭螺栓.強度等級:1100 MPa(室溫) | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004 |
| DIN EN 3818-2005 | 航空航天系列.鈦合金TI-P64001制MJ螺紋螺栓.強度等級:1100 MPa(室溫).技術規范 | Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 3818:2004 |
| DIN EN 3832-2005 | 航空航天系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制長螺紋細桿雙六角頭螺栓.等級:1550MPa(室溫)/650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004 |
| DIN EN 3833-2005 | 航空航天系列.鈍化的耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MJ螺紋螺栓.等級:1550MPa(室溫)/650℃.技術規 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature)/ 650 °C - Technical specification; German and English version EN 3833:2004 |
| DIN EN 3907-2006 | 航空航天系列.標準桿、長螺紋、雙六角頭、鍍MoS<指數2>的鈦合金TI-P64001螺栓.等級:1100MPa(室溫)/350°C. | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/350 °C: German and English version EN 3907:2004 |
| DIN EN 3912-2007 | 航空航天系列.鍍銀、FE-PA2601(FE-PA92HT,A286)型、長螺紋、細桿、六瓣凹槽、平頭螺栓耐熱鋼.分類:1100MPa( | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3912:2007 |
| DIN EN 4009-2006 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制帶安全鎖線孔、減徑柄、長螺紋的雙六角頭螺栓.等級:1 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004 |
| DIN EN 4172-2006 | 航空航天系列.緊公差TI-P64001陽極電鍍的米制鈦合金桿沉頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 °C（周圍溫 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4172:2006 |
| DIN EN 4173-2006 | 航空航天系列.緊公差TI-P64001陽極電鍍的米制鈦合金桿１００°正常頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4173:2006 |
| DIN EN 4176-2007 | 航空航天系列.陽極電鍍或熱鍍鋁法的TI-P6400鈦合金緊公差拉緊/剪切式100°埋頭標準頭釘緊螺栓.TI-P99002鈦 | Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification; German and English version EN 4176:2005 |
| DIN EN 4311-2007 | 航空航天系列.MoS<(指數)2>潤滑耐高溫和耐腐蝕鋼的中長螺紋粗公差遞減柄螺栓.等級:1100MPa(室溫)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006 |
| DIN EN 4312-2007 | 航空和航天系列.鈍化鋁合金涂層耐腐蝕耐熱中長螺紋粗公差遞減柄螺栓.等級:1100MPa(室溫下)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4312:2006 |
| DIN EN 4321-2006 | 航空航天系列.鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制帶安全鎖線孔、減徑柄、長螺紋的雙六角頭螺栓.等 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004 |
| DIN EN 4322-2006 | 航空航天系列.陽極氧化處理鍍MoS<指數2>的TI-P64001制帶安全鎖線孔、減徑柄、長螺紋的雙六角頭螺栓.強度等 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature): German and English version EN 4322:2004 |
| DIN EN 4352-2006 | 航空航天系列.鍍MoS2的耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制帶安全鎖線孔、減徑柄、長螺紋的雙六角頭螺 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004 |
| DIN EN 4401-2006 | 航空航天系列.緊公差TI-P64001鋁制有色覆層的米制鈦合金桿沉頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 °C（周 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006 |
| DIN EN 4402-2007 | 航空航天系列.米制有鋁色涂層鈦合金TI-P64001緊公差剪切式100°埋頭標準釘鎖緊螺栓.等級:1100 MPa (常溫)/3 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006 |
| DIN EN 4495-2007 | 航空和航天系列.鈍化鋁合金涂層陽極電鍍鈦合金短螺紋緊配合標準柄正十二頭螺栓.等級:1100MPa(室溫下)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006 |
| DIN EN 4498-2007 | 用有色熱鍍鋁法鈍化鎳合金耐熱中長螺紋緊公差標稱柄大十二頭螺栓.分類:1550MPa(室溫)/315℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German and English version EN 4498:2005 |
| DIN EN 4501-2007 | 航空航天系列.帶有色熱鍍鋁覆層陽極氧化的鈦合金中短螺紋緊公差標準柄正六角頭螺栓、米制系列.等級:1100MPa | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4501:2006 |
| DIN EN 477-1995 | 門窗制造用未增塑聚氯乙烯型材.用沉降螺栓測定主截面耐沖擊強度 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass; German version EN 477:1995 |
| DIN EN 74-1-2005 | 腳手架和支承架用聯結件、中心螺栓和踏板.第1部分:鋼管用聯結件.要求和試驗規程.德文版本 EN 74-1-2005德文 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures; German version EN 74-1:2005 |
| DIN EN ISO 10434-2005 | 石油、石油化學和相關工業用螺栓帽狀鋼閘閥 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004); German version EN ISO 10434:2004 |
| DIN EN ISO 10664-2005 | 螺栓和螺釘用內板擰的六角花形 | Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005 |
| DIN EN ISO 3506-1-1998 | 耐蝕鋼緊固件的機械性能.第1部分:螺栓,螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997 |
| DIN EN ISO 4014 Berichtigung 1-2006 | 六角頭螺栓.產品等級A和B級(ISO 4014:1999) | Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000, Corrigenda to DIN EN ISO 4014:2001-03 |
| DIN EN ISO 4014-2001 | 六角頭螺栓.產品等級A和B | Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000 |
| DIN EN ISO 4016-2001 | 六角頭螺栓.產品等級C | Hexagon head bolts - Product grade C (ISO 4016:1999); German version EN ISO 4016:2000 |
| DIN EN ISO 4759-1-2001 | 緊固件公差.第1部分:螺栓、螺釘和墊圈和螺母.產品等級A、B和C | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
| DIN EN ISO 4759-3-2000 | 緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.產品等級A和C | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 |
| DIN EN ISO 6149-1-2007 | 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第1部分:锪孔溝槽中裝 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006); German version EN ISO 6149-1:2007 |
| DIN EN ISO 6149-2-2007 | 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第2部分:重型(S系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version EN ISO 6149-2:2007 |
| DIN EN ISO 6149-3-2007 | 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第3部分:輕型(L系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version EN ISO 6149-3:2007 |
| DIN EN ISO 8765-2001 | 米制細牙螺紋六角頭螺栓.產品等級A和B | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999); German version EN ISO 8765:2000 |
| DIN EN ISO 887-2006 | 通用米制螺栓、螺釘和螺母用的平墊圈.一般示意圖(ISO 887:2000 + Cor. 1:2006) | Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07 |
| DIN EN ISO 898-1-1999 | 碳鋼和合金鋼制緊固件的機械性能.第1部分:螺栓,螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 |
| DIN EN ISO 9974-1-2000 | 一般用途和流體動力連接件.使用ISO 261螺紋的彈性密封或金屬與金屬密封的氣門和雙頭螺栓端頭.第1部分:螺紋 | Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); German version EN |
| DIN EN ISO 9974-2-2000 | 通用和液壓傳動用聯接件.用ISO261彈性螺紋或金屬與金屬密封的氣門和雙頭螺栓端頭.第2部分:(E型)帶彈性密封 | Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000 |
| DIN EN ISO 9974-3-2000 | 一般用途和流體動力連接件.使用ISO 261螺紋的彈性密封或金屬與金屬密封的氣門和雙頭螺栓端頭.第3部分:(B型) | Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000 |
| DIN ISO 16030-2007 | 氣壓傳動.接頭.端口和柱頭螺栓端頭.(ISO 16030-2001+修改件1-2005) | Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005) |
| DIN ISO 1891-1979 | 緊固件.螺栓、螺釘、螺母和附件.術語和名稱 | Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature |
| DIN ISO 262-1999 | ISO一般用途米制螺紋.螺釘、螺栓和螺母的選用尺寸（ISO 262- | ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) |
| DIN ISO 5855-2-1989 | 航空航天.MJ螺紋.第2部分:螺栓和螺母的極限尺寸; 等同采用 ISO 5855-2:1988 | Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988 |
| DIN ISO 691-2007 | 螺栓和螺母用裝配工具.扳手和套筒扳手開口.通用公差 | Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005) English version of DIN ISO 691:2007-04 |
| DIN ISO 7913-1986 | 航空和航天.緊固件.螺栓和螺釘?shù)男螤詈臀恢霉?等同采用 ISO 7913-1986 | Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985 |
| DIN ISO 885-2001 | 普通螺栓和螺釘.米制系列.端頭半徑 | General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000) |
| DIN ISO 8992-2005 | 緊固件.螺栓、螺釘、螺柱和螺母的一般要求 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| DIN ISO 9152-2005 | 航空航天.強度等級為1100 MPa的鈦合金制MJ螺紋螺栓.采購規范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification (ISO 9152:1998) |
| DIN V 4001-11 Bb.1-1992 | 計算機輔助設計標準零件庫.第11 Bb.1部分:幾何和參數規范.六角頭螺栓 | CAD standard parts library; specification of geometrie and parameters; hexagon head bolts |
| DIN V 4001-201-1990 | 計算機輔助設計標準件文檔.第201部分:幾何和參數規范.用工具從內部驅動的有普通安裝面緊公差的平頭螺栓 | CAD standard parts file; specifications of geometry and parameters; head screws, with plain sitting surface, with drive internal by tool |
| DIN V 4001-202-1989 | 計算機輔助設計標準件文檔.第202部分:幾何和參數規范.用工具從外部驅動的有普通安裝面緊公差的平頭螺栓 | CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive external by tool |
| DIN V 4001-204-1990 | 計算機輔助設計標準件文檔.第204部分:幾何和參數規范.用工具從內部驅動的有普通安裝面緊公差的平頭螺栓 | CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive internal by tool |
| DIN V 4001-901-1988 | 計算機輔助設計標準件文檔.第901部分:幾何和參數規范.螺栓和帶臺肩的銷釘 | CAD standard parts file; specification of geometry and parameters; bolts and pins with shoulders |
| DIN V 4001-902-1988 | 計算機輔助設計標準件文檔.第902部分:幾何和參數規范.螺栓和帶頭的銷釘 | CAD standard parts file; specification of geometry and parameters; bolts and pins with head |
| DIN V 4001-903-1990 | 計算機輔助設計標準件文檔.第903部分:幾何和參數規范.無頭螺栓和銷釘 | CAD standard parts file; specifications of geometry and parameters; bolts and pins without head |
| DIN V 65900-11-2001 | 航空航天系列.螺栓和銷釘.材料(AECMA 技術報告TR 3775:1999) | Aerospace series - Bolts and pins - Materials (AECMA Technical Report TR 3775:1999) |
| DIN V 74051-10-1989 | 牽引車和拖車之間的機械連接件.第10部分:40 mm 自動螺栓聯軸器與中心軸掛車使用的附加規范 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; additional specifications for the use with centre axle trailers |
| DIN V 74052-10-1989 | 牽引車和拖車之間的機械連接件.第10部分:50 mm 自動螺栓聯軸器與中心軸掛車使用的附加規范 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 50; additional specifications for the use with centre axle trailers |
| 編號 | 中文名稱 | 英文名稱 |