| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A47-251-5-2003 | 鋼絲繩接線端.安全.第5部分:U形螺栓拉線器 | (Terminations for steel wire ropes - Safety - Part 5 : U-bolt wire rope grips.) |
| NF A49-580-1988 | 鋼管腳手架和支承架用聯結件、中心螺栓和踏板.要求和測試程序 | (Cooplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes. Requirements and test procedures.) |
| NF A87-021-1998 | 焊接.弧雙端螺栓焊接的雙端螺栓和陶瓷箍.(歐洲標準EN ISO 13918) | (Welding. Studs and ceramic ferrules for arc stud welding.) |
| NF A89-600-1998 | 焊接.金屬材料的弧雙端螺栓焊接(歐洲標準EN ISO 14555) | (WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).) |
| NF E04-014-1933 | 機械、電氣和相關工業的技術圖，構架的鉚釘和螺栓的圖上符號表示法（１９８１．９確認） | (TECHNICAL DRAWINGS FOR MECHANICAL,ELECTRICAL AND CONNECTED INDUSTRIES. GRAPHICAL SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.) |
| NF E25-011-1992 | 緊固件的機械特性.由非亞鐵金屬制造的螺栓,螺釘,柱螺栓和螺母 | (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).) |
| NF E25-022-1-2001 | 緊固件公差.螺栓、螺釘、雙頭螺栓和螺母.第1部分:產品等級A、B及C | (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.) |
| NF E25-023-1992 | 緊固件.螺栓和螺釘?shù)淖杂沙叽缈? | (Fasteners. Clearance hole for bolts and screws.) |
| NF E25-100-1-1999 | 碳鋼合金制成的緊固件的機械性能.第1部分:螺栓、螺釘和螺柱 | (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.) |
| NF E25-100-3-1992 | 緊固件.表面不連續性.第1部分:一般要求的螺栓、螺釘和螺柱 | (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).) |
| NF E25-100-4-1992 | 緊固件.表面不連續性.第3部分:特殊要求的螺栓、螺釘和螺柱 | (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).) |
| NF E25-100-6-1998 | 不銹鋼緊固件耐腐蝕的機械特性.螺栓,螺絲和雙端螺栓 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.) |
| NF E25-100-7-1995 | 緊固件的機械性能.第7部分:公稱直徑1-10mm的螺栓和螺釘?shù)呐ちυ囼?yàn)和最小扭矩 | (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) |
| NF E25-112-2001 | 六角頭螺栓.產品等級A和B | (Hexagon head bolts - Product grades A and B.) |
| NF E25-113-1992 | 緊固件.六角頭螺栓.B級、縮桿制品 | (Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).) |
| NF E25-115-1-2001 | 六角頭螺栓.產品等級C | (Hexagon head bolts - Product grade C.) |
| NF E25-140-1994 | 緊固件.電弧焊接雙端螺栓.符號SA.尺寸和物理化學特性.拉制電弧焊接螺栓系統 | (FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.) |
| NF E25-152-2001 | 米制細牙螺紋的六角頭螺栓.產品等級A和B | (Hexagon head bolts with metric fine pitch thread - Product grades A and B.) |
| NF E25-501-2000 | 緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.A級和C級 | (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.) |
| NF E25-504-1-2003 | 米制細牙螺紋六角法蘭面螺栓.小系列 | (Hexagon bolts with flange with metric fine pitch thread - Small series.) |
| NF E25-504-1998 | 法蘭六角型螺栓.小型系列 | (HEXAGON BOLTS WITH FLANGE. SMALL SERIES. (EUROPEAN STANDARD EN 1662).) |
| NF E25-505-1997 | 帶法蘭六角頭螺栓.重形系列(歐洲標準EN 1665) | (HEXAGON BOLTS WITH FLANGE. HEAVY SERIES. (EUROPEAN STANDARD EN 1665).) |
| NF E25-525-2000 | 通用米制螺栓、螺釘和螺母用平墊圈.一般示意圖 | (Plain washers for metric bolts, screws and nuts for general purposes - General plan.) |
| NF E25-800-0-1994 | 緊固件.波紋鋼管用螺栓.第0部分:按要求所制的螺栓 | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).) |
| NF E25-800-1-1994 | 緊固件.波紋鋼管用螺栓.第1部分:帶法蘭或不帶法蘭,帶尖或不帶尖的六角頭螺釘.產品等級A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-800-2-1994 | 緊固件.波紋鋼管用螺栓.第2部分:帶尖或不帶尖的圓頭螺釘.產品等級A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-800-3-1994 | 緊固件.波紋鋼管用螺栓.第3部分:不帶法蘭的凸形六角螺母.產品等級C | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.) |
| NF E25-800-4-1994 | 緊固件.波紋鋼管用螺栓.第4部分:帶法蘭的凸形螺母.產品等級C | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.) |
| NF E27-000-1972 | 螺栓、螺母及附件.術語 | (Bolts, nuts and accessories.nomenclature.) |
| NF E27-312-1959 | 商業性通用螺栓制造.圓柱頭粗制或精制螺栓 | (CHEESE HEAD NIB BOLTS.) |
| NF E27-313-1959 | 商業性通用螺栓制造.圓頭粗制或精制螺栓.直徑從４到６０mm | (ROUND HEAD NIB BOLTS.) |
| NF E27-314-1959 | 商業性通用螺栓制造.埋頭或凸圓埋頭鐵制粗制或精制螺栓.直徑４到６０mm | (COUNTERSUNK OR RAISED COUNTERSUNK HEAD NIB BOLTS.) |
| NF E27-341-1973 | 商業性通用螺栓制造.“木結構”螺栓 | (BOLTS FOR TIMBER.) |
| NF E27-342-1961 | 商業性通用螺栓制造.埋頭或凸圓埋頭木螺栓 | (COUNTERSUNK OR RAISED COUNTERSUNK HEAD BOLTS (NIB OR SQUARE NECK) FOR TIMBER.) |
| NF E27-351-1969 | 商業性通用螺栓制造.凸圓頭方頸螺栓 | (ROUND HEAD SQUARE NECK BOLTS (“JAPY“ TYPE).) |
| NF E27-353-1961 | 商業性通用螺栓制造.帶銷埋頭犁形螺栓 | (COUNTERSUNK HEAD NIB BOLTS (“PLOUGHSHARE“ TYPE).) |
| NF E27-354-1961 | 商業性通用螺栓制造.方頸埋頭犁形螺栓 | (COUNTERSUNK HEAD SQUARE NECK BOLTS (“PLOUGHSHARE“ TYPE).) |
| NF E27-355-1980 | 緊固件.底板受力器材.輕微磨損零件固定用的雙耳埋頭螺栓 | (FASTENERS. EQUIPMENT FOR WORKING THE SOIL. COUNTERSUNK HEAD NIB BOLTS FOR FASTENING THIN WEAR PARTS.) |
| NF E27-412-1973 | 商業性通用螺栓制造.寬的方螺帽.直徑４到３０mm | (LARGE SQUARE NUTS.DIAMETERS FROM 4 TO 30 MM.) |
| NF E27-414-1969 | 螺栓制造.冠形螺帽 | (CASTLE NUTS.) |
| NF E27-488-1972 | 商業性通用螺栓制造.小銷 | (Cotter pin hole dimensions.) |
| NF E27-682-1965 | 商業性通用螺栓制造.木結構螺栓裝配的墊圈和墊片 | (Round or square washers for timber.) |
| NF E27-701-1984 | 金屬結構施工檢驗緊固螺栓.技術規范.訂貨,檢驗和供貨條件 | (Structural bolts and nuts intented for use in steel structures. Technical specifications. Order, test and delivery conditions.) |
| NF E27-702-1984 | 金屬結構施工檢驗緊固螺栓.螺栓使用性能試驗 | (Structural bolts and nuts intented for use in steel structures. Test on suitability of bolts for use.) |
| NF E27-711-1982 | 金屬結構施工檢驗緊固螺栓.六角頭螺栓.尺寸和公差 | (Locking bolts and nuts intended for use in metal constructions. Hexagon bolts. Dimensions and tolerances.) |
| NF E29-041-1994 | 工業管道.減縮的螺栓柄.規范 | (INDUSTRIAL PIPEWORK. REDUCED SHANK BOLTS. SPECIFICATIONS.) |
| NF E29-042-1-2000 | 法蘭及其接頭.螺栓連接.第1部分:螺栓連接的選擇 | (Flanges and their joints - Bolting - Part 1 : selection of bolting.) |
| NF E29-042-2-2002 | 法蘭及其連接件.螺栓連接.第2部分:鋼制法蘭用螺栓料的分類.PN標識的 | (Flanges and their joints - Bolting - Part 2 : classification of bolt materials for steel flanges, PN designated.) |
| NF E29-043-1990 | 工業管道工程.管道、鍋爐和壓力容器法蘭組件用非合金鋼或合金鋼制螺栓 | (Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.) |
| NF E74-300-1998 | 螺栓和螺母用裝配工具.扳手和套筒扳手的開口.通用公差 | (Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.) |
| NF F00-022-1978 | 鐵路材料梗概.半成品調整螺栓 | (RAILWAY MATERIAL IN GENERAL. HALF-FINISHED ADJUSTING BOLTS.) |
| NF F00-023-1978 | 通用鐵路設備.緊配合用精加工配合螺栓 | (RAILWAY MATERIAL IN GENERAL. FINISHED TIGHT-FIT BOLTS.) |
| NF F00-024-1978 | 通用鐵路設備.動配合用精加工配合螺栓 | (RAILWAY MATERIAL IN GENERAL. FINISHED CLEARANCE FIT BOLTS.) |
| NF F00-025-1971 | 通用鐵路設備.環首螺栓 | (GENERAL RAILWAY EQUIPMENT. EYE-BOLTS.) |
| NF F05-004-1972 | 鐵路固定設備.加強固定用定位楔式螺栓 | (FIXED RAILWAY EQUIPMENT. EXPANSION BOLTS WITH SPIKES FOR EXTRA FIRM FIXING.) |
| NF F37-060-1983 | 鐵路運輸設備.液態化工產品運輸用罐車和貯液集裝箱.帶扣釘螺栓閉鎖裝置的圓頂蓋 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS AND TANK CONTAINERS FOR CARRYING LIQUID CHEMICAL PRODUCTS. DOME COVER WITH A TOGGLE-BOLT CLOSING DEVICE.) |
| NF F42-031-1990 | 鐵路固定設備.電力牽引線用的壓接或螺栓壓接的裝置 | (RAILWAY FIXED EQUIPMENT. CRIMPED OR BOLT CRIMPED TERMINAL MATERIAL FOR ELECTRIC TRACTION LINES.) |
| NF F56-121-1984 | 鐵路固定設備.通訊和信號裝置架空線路用器材.鍍鋅六角頭螺栓 | (Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized hexagon head bolts.) |
| NF F56-122-1984 | 鐵路固定設備.通訊和信號裝置架空線路用器材.鍍鋅圓頭螺栓 | (Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized round head bolts.) |
| NF F56-208-1980 | 鐵路固定設備.通訊和信號裝置架空線路用器材.固定螺栓用環 | (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. RINGS FOR BRACING BOLTS.) |
| NF F76-014-1987 | 鐵路固定設備.３８mm魚尾板螺栓板手 | (Fixed railway equipment. Fork-wrenchs of 38 for fish-bolts.) |
| NF F76-026-1976 | 鐵路固定設備.粗制插銷螺栓.銷 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. KEY-BOLTS. KEY.) |
| NF J65-175-1958 | 造船工業.軸線.聯軸節.套筒聯軸節用軸端、制動銷和裝配螺栓 | (SHIPBUILDING. SHAFT LINES. COUPLINGS. DETAILS OF SHAFT ENDS,KEYS AND ASSEMBLY BOLTS FOR MUFF COUPLINGS.) |
| NF L05-224-1990 | 航空和航天螺栓用ISO 螺紋公差 | (Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.) |
| NF L05-230-2-1990 | 航空和航天.MJ螺紋.第2部分:螺栓和螺母的尺寸 | (AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.) |
| NF L20-021-1995 | 航空航天系列.T型頭螺栓孔和夾子的設計標準 | (AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS DESIGN STANDARD. (EUROPEAN STANDARD EN 3202).) |
| NF L21-271-2000 | 緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的凸頭鎖緊螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-272-2000 | 緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的100°埋頭鎖緊螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-273-2000 | 緊固件.緊公差T-A６V鋁合金桿并有XC１０鋼環凸頭鎖緊螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-274-2000 | 緊固件.緊公差T-A６V鈦合金桿并有XC１０鋼環１００°埋頭鎖緊螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L22-040-1956 | 航空螺栓螺母.使用公差.國際單位制螺紋 | (AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).) |
| NF L22-236-1989 | 航空用螺栓螺母.十二角頭螺釘.使用溫度在高于235℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.) |
| NF L22-237-1989 | 航空用螺栓螺母.帶鎖緊孔十二角頭螺釘.使用溫度在高于235℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.) |
| NF L22-246-1989 | 航空用螺栓螺母.十二角頭螺釘.細螺距.使用溫度高于在２３５℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.) |
| NF L22-431-2000 | 航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.ISO M或ISO MJ螺紋.根據直徑4H5H或5H的Ⅱ類公差 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-432-2000 | 航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.左旋ISO螺紋.根據直徑４H５H或５H的Ⅱ類公差 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-433-2000 | 航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.ISO M或ISO MJ螺紋４H公差等級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-434-2000 | 航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.ISO螺紋左旋４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-436-2000 | 航空用螺栓和螺母.帶標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.接直徑４H５H或5H進行公差分類 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-437-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.按直徑4H5H或5H進行公差分類 | (Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-438-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.接直徑4H５H或５H進行公差 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-439-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-440-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-441-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-442-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-443-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-444-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-451-2000 | 航空用螺栓和螺母.槽頂(有槽)扁六角頭螺母.標準厚度.ISO M或ISO MJ螺紋.按直徑４H５H或５H進行公差分類 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-453-2000 | 航空用螺栓和螺母.槽頂(有槽)扁六角頭螺母.ISO M或ISO MJ螺紋.按直徑４H５H或５H進行公差分類 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-455-2000 | 航空用螺栓和螺母.槽頂(有槽)扁六角頭螺母.ISO M或ISO MJ螺紋.４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-457-2000 | 航空用螺栓和螺母.槽頂(有槽)普通厚度六角頭螺母.ISO M或ISO MJ螺紋.４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-458-2000 | 航空用螺栓和螺母.槽頂(有槽)普通厚度六角頭螺母.左旋ISO M或ISO MJ螺紋.４H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-461-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭螺母.ISO M或ISO MJ細牙螺紋.４H５H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.) |
| NF L22-462-2000 | 航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭螺母.左旋ISO M或ISO MJ細牙螺紋.４H５H公差級 | (Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.) |
| NF L22-512-2001 | 航空螺栓和螺母.MoS2潤滑的、鍍鎘、鋼制、帶擴孔和系留墊圈的、ISO M或ISO MJ螺紋的自鎖定六角螺母.等級:11 | (Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambian) |
| NF L22-519-2000 | 航空用螺栓和螺母.自鎖十二角頭螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1550MPa(室溫)/235℃ | (Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC.) |
| NF L22-525-2001 | 航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、細螺距螺紋、ISO M螺紋、自鎖緊雙六角頭螺母.等級:1100MPa(室溫)/ | (Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.) |
| NF L22-541-2001 | 航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、ISO M或ISO MJ螺紋自鎖緊六角頭螺母.等級:1100MPa(室溫)/235℃或 | () |
| NF L22-567-2001 | 航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、ISO M或ISO MJ螺紋、帶擴孔的雙耳自鎖緊固定螺母.等級:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) |
| NF L22-568-2000 | 航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat) |
| NF L22-569-2000 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeer) |
| NF L22-570-2000 | 航空用螺栓和螺母.60度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempera) |
| NF L22-571-2000 | 航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 | (Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at am) |
| NF L22-572-2000 | 航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-573-2000 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫) | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-574-2000 | 航空用螺栓和螺母.銳角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa () |
| NF L22-575-2000 | 航空用螺栓和螺母.雙耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t) |
| NF L22-576-2000 | 航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien) |
| NF L22-577-2000 | 航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M) |
| NF L22-587-2000 | 航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperatu) |
| NF L22-588-2000 | 航空用螺栓和螺母.鍍銀不銹鋼制深槽單耳內鎖緊系留螺母.ISO M或ISO MJ螺紋.分類:1100 MPa/425度(室溫下) | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-589-2000 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/23 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe) |
| NF L22-590-2000 | 航空用螺栓和螺母.60度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/42 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-591-2000 | 航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a) |
| NF L22-592-2000 | 航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (a) |
| NF L22-593-2000 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa () |
| NF L22-594-2000 | 航空用螺栓和螺母.銳角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa) |
| NF L22-595-2000 | 航空用螺栓和螺母.雙耳扁埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient) |
| NF L22-596-2000 | 航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/ | (Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambien) |
| NF L24-030-1997 | 航空航天系列.鎳基合金NI-PH2601(鉻鎳鐵合金718)制耐熱MJ螺紋螺栓.等級:1275MPA(室溫)/650℃.技術規范(歐洲 | (AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).) |
| NF L24-101-1994 | 航空航天系列.鈍化耐熱和抗腐蝕短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) /425 DEGREES C. (EUROPEAN STANDARD EN 3052).) |
| NF L24-102-1997 | 航空和航天系列.凸臺,細六角頭,緊配合公差柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺栓.等級:1100MPA(室溫下)/3 | (Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-103-1995 | 航空航天系列.陽極化、MOS2潤滑的短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/315度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).) |
| NF L24-104-1995 | 航空航天系列.鍍鎘合金鋼的短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).) |
| NF L24-105-1995 | 航空航天系列.鈍化耐腐蝕鋼的短螺紋緊公差標準手柄標準六角螺栓.分類:600MPA(環境溫度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2887).) |
| NF L24-106-1995 | 航空航天系列.鈍化耐腐蝕鋼的短螺紋粗公差標準手柄標準六角螺栓.分類:600MPA(環境溫度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2888).) |
| NF L24-107-1995 | 航空航天系列.鍍鎘合金鋼的短螺紋粗公差標準手柄標準六角螺栓.分類:900MPA(環境溫度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).) |
| NF L24-108-1995 | 航空航天系列.鍍鎘合金鋼的帶螺紋頭的標準六角螺栓.分類:900MPA(環境溫度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).) |
| NF L24-116-1994 | 航空和航天系列.耐熱鋼FE-PA92HT(A286)用螺栓,六角頭,后角刀,長螺紋.分類.900MPa(室溫)/650℃ | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3006).) |
| NF L24-118-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P100HT(INCONEL 718).分類:1275MPA(在環境溫度下)/65 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).) |
| NF L24-119-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P100HT(INCONEL 718),鍍銀.分類:1275MPA(在環境溫度 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED. CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3009).) |
| NF L24-120-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P101HT(WASPALOY).分類:1210MPA(在環境溫度下)/730攝 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3010).) |
| NF L24-121-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P101HT(WASPALOY)鍍銀.分類:1210MPA(在環境溫度下)/7 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3011).) |
| NF L24-179-1995 | 航空航天系列.鍍鎘合金鋼的帶螺紋頭有槽平頭螺栓.分類:900MPA(環境溫度)/235度 | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2649).) |
| NF L24-211-1994 | 航空和航天系列.耐熱鋼FE-PA92HE用螺栓,雙六角頭,后角刀和長螺紋.分類.900MPa(室溫)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-224-1994 | 航空和航天系列.耐熱鎳基合金NI-P101HT用螺栓,雙六角頭,緊公差柄,中長螺紋.分類.1210MPa(室溫)/730℃ | (AEROSPACE SERIES. BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (NORME EUROPEENNE EN 3063).) |
| NF L24-228-1996 | 航空和航天系列.用MoS2潤滑陽極化鈦合金制短螺紋緊公差標準柄標準雙六角頭螺栓.分類:1100MPa(環境溫度)/315 | (AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).) |
| NF L24-229-1996 | 航空和航天系列.鈍化耐熱鎳基合金制制中長螺紋緊公差標準柄大六角頭螺栓.分類:1550MPa(環境溫度)/315℃(歐 | (AEROSPACE SERIES. BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED. CLASSIFICATION : 1550 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2874).) |
| NF L24-381-1994 | 航空和航天系列.耐熱鋼FE-PA92HE(A286)用螺栓,雙六角頭,后角刀和長螺紋.分類.900MPa(室溫)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-971-1995 | 航空和航天系列.鍍鎘合金鋼用短螺紋緊公差薄六角頭削角邊螺栓.分類.1100MPa(室溫)/235℃ | (Aerospace series. Bolts, shoudered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 degrees celsius.) |
| NF L31-521-1988 | 航空和航天系列.鋼制光面耐腐蝕球頭螺栓.無槽溝的連接.尺寸和負載 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads.) |
| NF L31-522-1988 | 航空和航天系列.鋼制光面球頭螺栓.有槽溝的連接.尺寸和負載 | (Aerospace series. Bearings-spherical plain in steel with assembly slots. Dimensions and loads.) |
| NF L31-553-1988 | 航空和航天系列.自潤滑油封防腐球頭螺栓和寬內墊圈.尺寸和負載 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads.) |
| NF L31-554-1988 | 航空和航天系列.輕系列自潤滑油封鋼制耐腐蝕球頭螺栓的鋼球頭螺栓 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, light series. Dimensions and loads.) |
| NF L31-555-1988 | 航空和航天系列.標準系列自潤滑油封鋼制耐腐蝕球頭螺栓.尺寸和負載 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, normal series. Dimensions and loads.) |
| NF L35-172-1990 | 航空和航天系列.帶螺紋桿和自潤滑油封球頭螺栓的可調底座.尺寸和負載.(歐洲標準 EN 2498) | (AEROSPACE SERIES. ROD ENDS,AJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AN THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2498).) |
| NF L43-312-1973 | 低壓旋轉接頭的空心螺栓 | (SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,BANJO BOLT.) |
| NF L46-211-1988 | 航空航天.流體系統用奧米加夾緊裝置(騎馬螺栓).尺寸 | (AEROSPACE. OMEGA CLAMPS (SADDLE CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.) |
| NF L92-211-1980 | 用作機上裝卸機件的中空固定螺栓.ＩＳＯ米制螺紋剖面和BNAE公差 | (Fastening eye bolts for aircraft handling equipment with metric ISO thread. Profile and BNAE tolerances.) |
| NF L92-221-1980 | 用作機上裝卸機件的中空固定螺栓.ＩＳＯ米制螺紋剖面和公差.加強型 | (Fastening eye bolts for aircraft handling equipment with metric ISO thread profile and tolerances. Strengthened type.) |
| NF M81-450-1989 | 煤礦器材.樹脂地腳螺栓.規格和試驗方法 | (MINING EQUIPMENT. RESIN ANCHOR BOLTS. SPECIFICATIONS AND TEST METHODS.) |
| NF M87-400-1984 | 石油工業.帶外部桿和螺栓蓋的鋼制閥門.法蘭或焊接端點ＩＳＯＰＮ２０．ＩＳＯＰＮ４２０ | (Petroleum industry. Steel gate valves with-on flanges and joints. ISO PN 20 to ISO PN 420.) |
| NF P22-430-1982 | 金屬結構.非預應力螺栓連接.構件及螺栓的設計 | (Metal construction. Assembly by non-prestressed bolts. Conditions of construction and design of the bolts.) |
| NF P22-431-1978 | 金屬結構.非預應力螺栓連接.連接施工 | (METAL CONSTRUCTION. ASSEMBLY BY NON PRESTRESSED BOLTS. EXECUTION OF ASSEMBLIES.) |
| NF P22-460-1979 | 金屬結構.可控拉緊螺栓連接.構造規定和螺栓計算 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. STRUCTURES REQUIREMENTS AND CHECKING OF JOINTING.) |
| NF P22-461-1979 | 金屬結構.可控拉緊螺栓連接.常規摩擦系數測定 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. DETERMINAITON OF THE CONVENTIONAL COEFFICIENT OF FRICTION.) |
| NF P22-462-1978 | 金屬結構.可控拉緊螺栓連接.連接件制造和準備 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. FABRICATION AND PREPARATION OF JOINTS.) |
| NF P22-463-1978 | 金屬結構.可控拉緊螺栓連接.連接施工 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. EXECUTION OF JOINTS.) |
| NF P22-466-1979 | 金屬結構.可控拉緊螺栓連接.螺栓拉緊和檢驗方法 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. METHODS OF TIGHTENING AND CHECKING OF BOLTS.) |
| NF P22-468-1987 | 金屬結構.可控拉緊螺栓連接.螺母控制旋轉拉緊.旋轉角測定 | (Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.) |
| NF P22-469-1978 | 金屬結構.可控拉緊螺栓連接.扭力扳手校準 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. CALIBRATION OF TORQUE WRENCHES.) |
| NF P26-323-1999 | 建筑物五金.門窗螺栓.要求和試驗方法 | (Building hardware - Door and window bolts - Requirements and test methods.) |
| NF P26-422-1949 | 五金.扣鎖螺栓 | (HARDWARE. PADLOCK EYE.) |
| NF P37-414-1967 | 屋頂附件.鋼板或沖壓帶鋼制嵌有相應長度桿的螺栓卡箍 | (ROOFING ACCESSORIES. STAMPED SHEET OR STRIP METAL BOLT CLAMPS WITH INSERTED PIN.) |
| NF P37-415-1967 | 屋頂附件.帶鋼制嵌有相應長度桿的螺栓卡箍 | (ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH INSERTED PIN.) |
| NF P37-416-1967 | 屋頂附件.帶鋼制嵌有廷長桿的螺栓卡箍 | (ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH EXTENDED PIN.) |
| NF R16-217-1986 | 道路車輛.壓燃內燃機用由定心螺栓固定和帶水平法蘭的單極燃油濾清器.安裝和連接尺寸 | (ROAD VEHICLES. SINGLE FUEL FILTERS WITH HORIZONTAL FLANGES AND CENTRE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-218-1986 | 道路車輛.壓燃內燃機用帶水平法蘭用螺栓固定的燃油濾清器頭.安裝和連接尺寸 | (ROAD VEHICLES. HEADS FOR SPIN-ON FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-331-1986 | 道路車輛.柴油發動機.22型螺栓固定的噴嘴 | (ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.) |
| NF R47-203-1952 | 彈簧片固定螺栓 | (Spring leaves fastening bolts.) |
| NF R93-183-1980 | 電阻電焊鋼螺釘、螺栓和螺母機械特性 | (MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.) |
| NF S83-261-1995 | 鐘表業.吊環螺栓 | (Horology. Studs.) |
| NF T81-151-1977 | 化學產品的運輸與裝卸.道路罐車.用銷或螺栓固定的閥門用圓蓋 | (TRANSPORTATION AND HANDLING OF CHEMICALS. ROAD TANKERS. CAPS FOR VALVES FIXED BY PINS OR BOLTS.) |
| NF T81-152-1978 | 液態化學產品的運輸與裝卸.罐車.５００和６００圓頂蓋.帶扣釘螺栓的閉鎖裝置 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. ROADS TANKERS. 500 AND 600 DOMCOVER. CLOSING DEVICES WITH CLAMPS.) |
| 編號 | 中文名稱 | 英文名稱 |