| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI/ASME B16.1-2005
| 25、125、250和800級鑄鐵管法蘭和法蘭配件
| Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800
|
| ANSI/ASME B16.42-1998
| 球墨鑄鐵管法蘭和法蘭配件
| Ductile Iron Pipe Flanges and Flanged Fittings
|
| ANSI/ASME B16.45-1998
| Soventr排水系統用鑄鐵管件
| Cast Iron Fittings for Soventr Drainage Systems
|
| ANSI/ASTM A182/A 182M-2001
| 高溫設備用鍛制或軋制合金鋼管法蘭、鍛制管件、閥門及零件規范
| Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
| ANSI/ASTM D1599-1999
| 塑料管材、管道和管件短時液壓故障壓力試驗方法
| Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
|
| ANSI/ASTM D2152-1995
| 丙銅浸入擠壓聚氯乙烯管材和模鑄管件熔解充分性試驗方法
| Test Method for Adequacy of Fusion of Extruded Poly (Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
|
| ANSI/ASTM D2444-1999
| 熱塑管材和管件耐沖擊性落錘試驗方法
| Test Method for Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
|
| ANSI/ASTM D2468-1996
| 丙烯腈-丁二烯-苯乙烯共聚物塑料管材和管件規范,表 40
| Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
|
| ANSI/ASTM D2671-2000
| 電氣用熱縮管件試驗方法(10.02)
| Test Methods for Heat-Shrinkable Tubing for Electrical Use (10.02)
|
| ANSI/ASTM D2855-1996
| 聚氯乙烯 (PVC)管材和管件溶劑接合連接件制作慣例
| Practice for Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings
|
| ANSI/ASTM D2902-2000
| 含氟聚合物樹脂熱縮管件規范(10.02)
| Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation
|
| ANSI/ASTM D2992-2001
| 玻璃纖維(玻璃纖維增強熱固樹脂)管件和配件獲得靜水壓或壓力設計基礎的實施規程(08.04)
| Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (08.04)
|
| ANSI/ASTM D2996-2001
| 繞組線玻璃纖維(玻璃纖維增強熱固樹脂)管件和配件規范(08.04)
| Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe (08.04)
|
| ANSI/ASTM D3144-2000
| 電絕緣用聚1,1-二氟乙烯熱縮管件規范(10.02)
| Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
|
| ANSI/ASTM D3261-1997
| 聚乙烯塑料管材和管道用對接熱融合聚乙烯塑料管件規范
| Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
|
| ANSI/ASTM D5677-2005
| 用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型
| Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
|
| ANSI/ASTM F1336-2002
| 帶密封墊的聚氯乙烯(PVC)下水道管件規范
| Specification for Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings
|
| ANSI/ASTM F1866-2005
| 管壁厚度40的聚氯乙烯(PVC)塑料排水管和DWV裝配管件的規范
| Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
|
| ANSI/ASTM F1961-2002
| 交聯聚乙烯(PEX)管用帶盤簧的金屬機械冷壓擴口式管件規范
| Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
|
| ANSI/AWWA C105/A 21.5-2005
| 球墨鑄鐵管路系統用聚乙烯包裝物
| Polyethylene Encasement for Ductile-Iron Pipe Systems
|
| ANSI/AWWA C115/A 21.15-2005
| 帶球墨鑄鐵或灰口鑄鐵螺紋法蘭的法蘭球墨鑄鐵管
| Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
|
| ANSI/AWWA C150/A 21.50-2002
| 球墨鑄鐵管的厚度設計
| Thickness Design of Ductile-Iron Pipe
|
| ANSI/SAE J1131-1998
| 汽車空氣制動系統中使用的SAE J844d非金屬管件和連接組件的性能要求
| Tubing and Fitting Assemblies Used in Automotive Air Brake Systems, Performance Requirements for SAE J844d Nonmetallic
|
| ANSI/SAE J246-1994
| 球面及法蘭式(壓縮)套管管件
| Spherical and Flanged Sleeve (Compression) Tube Fittings
|
| ANSI/SAE J514-1998
| 液壓管件
| Hydraulic Tube Fittings
|
| ANSI/SAE J530-1994
| 汽車管件接頭
| Automotive Pipe Fittings
|
| ANSI/UL 109-2004
| 易燃和可燃液體、制冷輔助設備和船上用管件的安全標準
| Standard for Safety for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
|
| ANSI/UL 1684-2002
| 增強熱固樹脂管件和配件
| Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
|
| ANSI/UL 797-2004
| 電氣金屬管件
| Electrical Metallic Tubing
|
| ASME A112.19.1M Supplement 2-2
| 搪瓷鑄鐵管道固定件.補充件2
| (Enameled cast iron plumbing fixtures - Supplement 2)
|
| ASME A112.19.1M-1994
| 搪瓷鑄鐵管道固定件
| (Enameled cast iron plumbing fixtures)
|
| ASME B16.1-1998
| 鑄鐵管法蘭及法蘭配件.等級25、125和250
| (Cast iron pipe flanges and flanged fittings - Classes 25, 125, and 250)
|
| ASME B16.12-1998
| 鑄鐵螺紋排水管件
| (Cast iron threaded drainage fittings)
|
| ASME B16.15-1985
| 鑄青銅螺紋管件
| (Cast bronze threaded fittings)
|
| ASME B16.18-2001
| 鑄銅合金軟釬焊連接壓力管件
| (Cast copper alloy solder joint pressure fittings)
|
| ASME B16.23-2002
| DWV類鑄銅合金釬焊連接排水管件
| (Cast copper alloy solder joint drainage fittings: DWV)
|
| ASME B16.42-1998
| 球墨鑄鐵管法蘭及法蘭配件.等級150和300
| (Ductile iron pipe flanges and flanged fittings - Classes 150 and 300)
|
| ASME B16.5-1996
| 管法蘭和法蘭管件.NPS 1/2 - NPS 24
| (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24)
|
| ASME B16.5a Addenda-1998
| 管法蘭和法蘭管件.NPS 1/2至NPS 24.附錄
| (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24; Addenda)
|
| ASTM A 182/A 182Ma-2005
| 高溫設備用鍛制或軋制合金鋼管法蘭、鍛制管件、閥門及零件的標準規范
| Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
| ASTM A 338-1984
| 鐵路,船舶和其他重型裝備在溫度達到650華氏度(345攝氏度)時使用的可鍛鑄鐵法蘭,管件和閥門零件
| Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C)
|
| ASTM A 674-2005
| 水或其他液體用球墨鑄鐵管的聚乙烯包裝物的標準實施規程
| Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
|
| ASTM B 903-2000
| 內部增強的無縫銅熱交換器管件的標準規范
| Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
|
| ASTM C 450-2002
| 公稱尺寸的管件、容器隔熱層用絕熱配件覆蓋物生產的標準實施規范
| Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
|
| ASTM C 668-1998
| 石棉水泥傳輸管件標準規范
| Standard Specification for Asbestos-Cement Transmission Pipe
|
| ASTM D 2661-2002
| 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通氣管及其管件.附表40
| Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
|
| ASTM D 2665a-2004
| 聚氯乙烯(PVC)塑料排水管、排污管和通風管及管件的標準規范
| Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
|
| ASTM F 1336-2002
| 襯墊聚氯乙烯(PVC)物的下水道管件的標準規范
| Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
|
| ASTM F 1961a-2002
| 交聯聚乙烯(PEX)管用帶盤簧的金屬機械冷擴口加壓管件的標準規范
| Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
|
| ASTM F 2080-2005
| 交聯聚乙烯(PEX)管用帶金屬壓縮套的冷膨脹管件的標準規范
| Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
|
| ASTM F 2159-2005
| SDR9交聯聚乙烯(PEX)管用利用銅擠壓環的塑料插入管件的標準規范
| Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing |
| ASTM F 876-2005
| 交聯聚乙烯(PEX)管件的標準規范
| Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
| UL 1821-2003
| 消防設備用熱塑性塑料噴水器的管及其管件
| (Thermoplastic sprinkler - Pipe and fittings for fire protection service)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|