| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF A48-720-1999
| 建筑物排水用鑄鐵管和配件及其接頭和附件.要求、試驗方法和質量保證
| (Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.)
|
| NF A48-801-2002
| 水管用球墨鑄鐵管、配件和附件及其接頭.要求和試驗方法
| (Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods.)
|
| NF A48-810-1995
| 燃?xì)夤艿烙们蚰T鐵管、配件、附件及其接頭.要求和試驗方法
| (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
|
| NF A48-810/A1-1999
| 燃?xì)夤艿烙们蚰T鐵管、配件、附件及其接頭.要求和試驗方法
| (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
|
| NF A48-820-1994
| 污水排放用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法
| (Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.)
|
| NF A48-840-1984
| 鑄造產品.鑄制產品.球墨鑄鐵管道部件.法蘭盤系列.法蘭盤.定義.尺寸.規范
| (FOUNDRY PRODUCTS. SPHEROIDAL GRAPHITE CAST IRON PIPES. FLANGES SERIES. FLANGES DEFINITION. DIMENSIONS. SPECIFICATIONS.)
|
| NF A48-850-1984
| 鑄造產品.溢流管用球墨鑄鐵管道部件.溢流管.承插件系列.技術規范
| (FOUNDRY PRODUCTS. DUCTILE CAST IRON PIPING ELEMENTS FOR PRE-INSULATED PIPELINE. PRE-INSULATED PIPES,SOCKET SERIE. TECHNICAL SPECIFICATION.)
|
| NF A48-851-1985
| 鑄造產品.壓力管道用球墨鑄鐵管.聚氨酯涂層
| (FOUNDRY PRODUCTS. DUCTILE IRON PIPES FOR PRESSURE PIPELINES. POLYURETHAN EXTERNAL COATING.)
|
| NF A48-860-1981
| 鑄造產品.承壓管道用可鍛鑄鐵管道部件.承插系列.GS快速接頭.連接尺寸和連接附件
| (Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.)
|
| NF A48-870-1981
| 鑄造產品.承接管道用可鍛鑄鐵管道部件.承插系列.GS標準接頭.連接尺寸和連接附件
| (Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.)
|
| NF A48-902-1985
| 鑄造產品.壓力管道用球墨鑄鐵管.離心水泥砂漿內飾面.新涂覆砂漿成分的控制
| (Foundry products. Ductile iron pipes for pressure pipelines. Contrifugal cement mortar internal lining. Composition controls of freshly applied mortar.)
|
| NF D18-201-1989
| 衛生設備管件.排放閥和混合閥的一般技術規范(公稱尺寸1/2)PN 10.最低水壓0.05MPa(0.5巴)
| (Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) pn 10. Minimum flow pressure of 0,05 MPa (0,5 bar).)
|
| NF D18-208-1997
| (PN 10)衛生間管件的淋浴用軟管
| (Showers hoses for (PN 10) sanitary tapware.)
|
| NF D18-213-1996
| 衛生間管件.自動關閉閥PN 10
| (Sanitary tapware. Automatic shut-off valves pn 10.)
|
| NF D36-113-1-2001
| 使用商用丙烷,商用丁烷和蒸汽相混合物的橡膠和塑料管件和軟管組件和配件.第1部分:橡膠,塑料管件和軟管的要
| (Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase - Part 1 : requirements for rubber and plastics tubing and ho)
|
| NF E29-000-1996
| 管件.標準壓力的定義和選擇(歐洲標準EN 1333)
| (Pipework components. Definition and selection of pn.)
|
| NF P41-220/A1-1999
| DTU 60.2.建筑工程.土壤水,雨水,廢水排水鑄鐵管道的技術規范
| (DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.)
|
| NF P41-220/A2-2000
| DTU 60.2.建筑工程.土壤水,雨水,廢水排水鑄鐵管道的技術規范
| (DTU 60.2 - Building works - Cast iron for soil water, rain water and waste water drainage - Technical specifications.)
|
| NF T54-016-4-1999
| 供水用塑料管道系統.未增塑聚氯乙烯.第4部分:管件和附件
| (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.)
|
| NF T54-090-1976
| 塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接頭顏色
| (PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.)
|
| NF T54-095-1985
| 塑料.未增塑聚氯乙烯管件接頭粘合溶劑.使用特性
| (Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.)
|
| NF T54-300-3-2003
| 普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第3部分:管件
| (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.)
|
| NF T54-934-1997
| 塑料管道系統.管件,閥和附件.氣流率/壓降關系的測定
| (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|