| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 11832-1-1990
| 農場和牲畜飼養設備.輸送液態糞肥的管道用閥門管件.第1部分:最大1巴的靜壓力閘閥
| Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
|
| DIN 11861-1976
| 飲料和乳品用管件.橡膠密封圈.要求和試驗
| Drink- and dairy fittings; sealing rings made of elastomeric materials, requirements testing
|
| DIN 11867-2005
| 無菌、化學和制藥工業的生鐵系統用彎頭、不銹鋼焊接管件
| Elbows for pigging systems, welding fittings in stainless steel, for aseptic, chemical and pharmaceutical industries
|
| DIN 12918-1-1999
| 實驗室設備.實驗室管件.第1部分:水閥
| Laboratory equipment - Laboratory fittings - Part 1: Valves for water
|
| DIN 16831-6-2003
| 管道連接件和壓力管用聚丁烯(PB)元件.PB 125. 第6部分:電阻焊管件.尺寸
| Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 6: Fittings for resistance-welding; Dimensions
|
| DIN 16962-9-1983
| 1型和2型聚丙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸
| Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
|
| DIN 16963-14-1983
| 1型和2型高密度聚乙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸
| Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
|
| DIN 16963-9-1980
| 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑三通管件.尺寸
| Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
|
| DIN 16966-4-1982
| 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.三通噴管嘴尺寸
| Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions
|
| DIN 16966-5-1982
| 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.縮徑管.尺寸
| Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions
|
| DIN 16966-6-1982
| 玻璃纖維增強聚酯樹管(UP-GF)管件和接頭組件.卡圈、法蘭、密封圈、尺寸
| Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions
|
| DIN 16966-8-1982
| 玻璃纖維增強聚酯管(UP-GF)管件和接頭.層壓塑料接頭.尺寸
| Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions
|
| DIN 16967-2-1982
| 玻璃纖維增強環氧樹脂(EP-GF)管件和接頭.彎管、三通管、尺寸
| Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions
|
| DIN 19522-2000
| 無承口的鑄鐵排水管和管件
| Cast iron drainage pipes and fittings without sockets (SML)
|
| DIN 19534-3-2000
| 非壓力地下排水和污水排放用帶環形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:質量控制和安裝
| Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation
|
| DIN 19535-10-2000
| 建筑物內耐熱水排污系統(HT)用高密度聚乙烯(PE-HD)管和管件.第10部分:防火性能、質量控制和安裝的推薦規范
| High-density polyethylene (PE-HD) pipes and fittings for hot-water resistant waste and soil discharge systems (HT) inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
|
| DIN 19561-10-1999
| 建筑物內部耐熱水的廢水和污物排放系統用苯乙烯共聚物制管和管件.第10部分:燃燒性能、質量控制和安裝的推薦
| Pipes and fittings made of styrene-copolymerisats for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
|
| DIN 19585-1976
| 下水道管件.鑄鐵管件、混凝土管件及與鑄鐵相連的混凝土制管件的交貨技術條件
| Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
|
| DIN 19585-1976
| 下水道管件.鑄鐵管件、混凝土管件及與鑄鐵相連的混凝土制管件的交貨技術條件
| Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
|
| DIN 19695-1977
| 混凝土管、鋼筋混凝土管及預應力混凝土管、管件和混凝土檢查井的筒圈的運輸和儲存說明書
| Directions for transporting and storing of concrete pipes, reinforced concrete pipes, prestressed concrete pipes and fittings and concrete manhole shaft rings
|
| DIN 19807-1977
| 石棉水泥壓力管道的專用鐵鑄件.鑄鐵管的連接件
| Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes
|
| DIN 2410-3-1978
| 管件.混凝土、鋼筋混凝土和預應力混凝土管件的標準的綜述
| Pipes; Survey of Standards for Pipes from Concrete, Reinforced Concrete and Prestressed Concrete
|
| DIN 24150 Bb.1-1990
| 通風設備.金屬管件和管接頭的連接.VO型連接的示例
| Ventilation equipment; joints for metal tubes and fittings; examples of type VO joints
|
| DIN 24150-1990
| 通風設備.金屬管件和管接頭的連接
| Ventilation equipment; joints for metal tubes and fittings
|
| DIN 2605-2-1995
| 對焊管件.彎管.第2部分:全利用率的相關性
| Butt welding fittings - Elbows - Part 2: Full correlation of utilization
|
| DIN 2615-1-1992
| 對焊鋼制管件.帶有換算壓力系數的丁字管接
| Steel butt-welding pipes fittings; tees with reduced pressure factor
|
| DIN 2615-2-1992
| 對焊鋼制管件.在全工作壓力下使用的丁字管接
| Steel butt-welding pipe fittings; tees for use at full service pressure
|
| DIN 28601-2000
| 延性鑄鐵管道和配件.螺紋套管接頭.組件、套管、螺絲環、密封環和滑動環
| Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
|
| DIN 28602-2000
| 球墨鑄鐵管及管件.栓接壓蓋密封接頭.組件、套管、中間環、密封圈、螺栓和螺母
| Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
|
| DIN 28602-2000
| 球墨鑄鐵管及管件.栓接壓蓋密封接頭.組件、套管、中間環、密封圈、螺栓和螺母
| Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
|
| DIN 28603-2002
| 可鍛鑄鐵管道和配件.插入式連接件.測量、管座和密封墊
| Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets
|
| DIN 2880-1999
| 鑄鐵管、鋼管和管接頭的水泥砂漿管襯料的應用
| Application of cement mortar lining for cast iron pipes, steel pipes and fittings
|
| DIN 30674-2-1992
| 球墨鑄鐵管用水泥砂漿涂層.要求和檢驗
| Cement mortar coatings for ductile iron pipes; requirements and testing
|
| DIN 30674-3-2001
| 護套式可塑鑄鐵管道.第3部分:帶護套保護的鍍鋅層
| Sheathing ductile cast iron pipes - Part 3: Zinc coating with protective sheathing
|
| DIN 30674-5-1985
| 球墨鑄鐵管的外部防護.聚乙烯護套
| External protection of ductile cast iron pipes; polyethylene sleeving
|
| DIN 30675-2-1993
| 掩埋管道的外部防腐.球墨鑄鐵管的防腐蝕系統
| External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes
|
| DIN 30677-2-1988
| 埋設管件的外部防腐處理.第2部分:加厚式熱固性塑料涂層
| External corrosion protection of buried valves; heavy-duty thermoset plastics coatings
|
| DIN 32676-2001
| 飲食業、化工業和醫藥業用管件.不銹鋼管卡箍連接.焊接式
| Fittings for the food, chemical and pharmaceutical industries - Clamp connections for stainless steel tubes - Weld-on type
|
| DIN 3475-1993
| 未處理水和可飲用水用的球墨鑄鐵管閥和管接頭.內部涂搪瓷防腐蝕.質量要求和試驗
| Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing
|
| DIN 3535-5-1993
| 煤氣供氣密封件:煤氣管件和煤氣設備用橡膠、軟木和合成纖維制密封材料.安全性試驗要求
| Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests
|
| DIN 3544-1-1985
| 高密度聚乙烯(HDPE)管件.第1部分:攻螺紋管件的要求和試驗
| High-density polyethylene (HDPE) valves; tapping valves; requirements and test
|
| DIN 3852-2-2000
| 管件和閥門用管堵和螺紋孔.帶惠氏管螺紋的螺塞.各類的總成本
| Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
|
| DIN 49012-1982
| 電氣裝置用導管和管件.用于重機械應力的金屬軟管.結構形式和要求
| Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements
|
| DIN 6653-1-2004
| 飲料自動售貨系統.附件.第1部分:飲料或基本材料管件
| Beverage dispensing systems - Accessories - Part 1: Beverage or base material pipework
|
| DIN 71401-2-1972
| 第2部分:第2部分:內燃機排液管件
| Drain valves for internal combustion engines
|
| DIN 8061 Bb.1-1984
| 未增塑聚氯乙烯管.PVC-U管和管件的耐化學性
| Unplasticized polyvinylchloride pipes; chemical resistance of pipes and fittings of (PVC-U)
|
| DIN 8062-1988
| 未增塑聚氯乙烯管件(PVC-U.PVC-H).尺寸
| Unplasticized polyvinyl chloride (PVC-U, PVC-HI) pipes; dimensions
|
| DIN 8075 Bb.1-1984
| 高密度聚乙烯管(HDPE).管和管件的耐化學性
| High density polyethylene (HDPE) pipes; chemical resistance of pipes and fittings
|
| DIN 8078 Bb.1-1982
| 聚丙烯(PP)管.管和管件的抗化學性
| Pipes of polypropylene (PP); chemical resistance of pipes and fittings
|
| DIN 85004-4-2002
| 銅鎳合金管.第4部分:管件技術規范
| Pipelines made of copper-nickel-alloys - Part 4: Technical specification for tubes
|
| DIN 86200-1989
| 滅火和甲板沖洗設備.軟管接頭.管件.軟管.附件.造船用各類管件產品概要
| Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding
|
| DIN 86286-1995
| 船上衛生設備.衛生間裝備和管件的布置
| Sanitary furnishing on ships - Positioning of sanitary objects and fittings
|
| DIN EN 10242/A2-2003
| 可鍛鑄鐵制螺紋管件.修正A2
| Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003
|
| DIN EN 10253-1-1999
| 對焊管管件.第1部分:一般用途和無特殊檢驗要求的鍛造碳鋼
| Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999
|
| DIN EN 10284-2000
| 聚乙烯(PE)管道系統用帶壓縮端的可鍛鑄鐵管件
| Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
|
| DIN EN 10284-2000
| 聚乙烯(PE)管道系統用帶壓縮端的可鍛鑄鐵管件
| Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
|
| DIN EN 10298-2005
| 岸上和海底管路用鋼管和管件.水泥灰漿內襯.德文版本EN 10298-2005
| Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
|
| DIN EN 1092-2-1997
| 法蘭及其連接.按PN標注的管、管件、異形件和附件用圓形法蘭.第2部分:鑄鐵法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges; German version EN 1092-2:1997
|
| DIN EN 1111-1998
| 衛生設備管件.恒溫混合閥(PN 10).通用技術規范
| Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
|
| DIN EN 1112-1997
| 盥洗室(PN 10)管件用淋浴噴頭
| Shower outlets for (PN 10) sanitary tapware; German version EN 1112:1997
|
| DIN EN 1113-1997
| 盥洗室(PN 10)管件用淋浴噴頭軟管
| Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997
|
| DIN EN 1123-2-1999
| 帶插接套管廢水管道.縱向焊縫熱鍍鋅鋼管道和管件.第2部分:尺寸
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:1999
|
| DIN EN 1123-3-2005
| 廢水系統用帶插接套的長焊縫焊接熱浸鍍鋅鋼管制管道和管件.第3部分:真空排水系統和船上排水系統的尺寸和特
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
|
| DIN EN 1124-2-1999
| 帶插接套管廢水管道.縱向焊縫不銹鋼制造管和管件.第2部分:S系統.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999
|
| DIN EN 1124-3-1999
| 帶插接套管廢水管道.縱向焊縫不銹鋼制造管和管件.第3部分:X系統.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999
|
| DIN EN 12107-1997
| 塑料管道系統.注塑熱塑性塑料配件、閥門和附件.注塑熱塑材料管件持久靜液壓強度的測定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
|
| DIN EN 12200-1-2001
| 地上露天用塑料雨水管道系統.未增塑聚氯乙烯.第1部分:管、管件和管道系統規范
| Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000
|
| DIN EN 12201-3-2003
| 供水用塑料管道系統.聚乙烯.第3部分:管件
| Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2003
|
| DIN EN 12293-1999
| 塑料管道系統.冷、熱水用熱塑性塑料管道和管件.檢驗已安裝的組件耐溫度循環的試驗方法
| Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999
|
| DIN EN 12295-1999
| 塑料管道系統.熱水和冷水用熱塑性塑料管和相關管件.管接頭耐循環壓力的檢測方法
| Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
|
| DIN EN 12342-1998
| 用于麻醉器和人工呼吸器的呼吸管件
| Breathing tubes intended for use with anaesthetic apparatus and ventilators; German version EN 12342:1998
|
| DIN EN 1254-4-1998
| 銅和銅合金.管配件.第4部分:把其它連接端頭和毛細管或壓力接頭相連接的管件
| Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998
|
| DIN EN 12842-2000
| PVC-U或PE管道系統用球墨鑄鐵管件.要求和試驗方法
| Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000
|
| DIN EN 12842-2000
| PVC-U或PE管道系統用球墨鑄鐵管件.要求和試驗方法
| Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000
|
| DIN EN 1286-1999
| 衛生器具管件.低壓機械調混合閥.通用技術規范
| Sanitary tapware - Low pressure mechanical mixing valves; general technical specification; German version EN 1286:1999
|
| DIN EN 1287-1999
| 衛生器具管件.低壓恒溫混合閥.通用技術規范
| Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
|
| DIN EN 13312-4-2001
| 生物技術.管路和儀器性能準則.第4部分:管件
| Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; German version EN 13312-4:2001
|
| DIN EN 1401-1-1998
| 非壓力地下排水和污水用塑料管道系統.硬聚氯乙烯(PVC-V).第1部分:管、管件和系統規范
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998
|
| DIN EN 14364-2006
| 壓力和無壓力排水和排污塑料管道系統.基于不飽和聚酯樹脂的玻璃增強熱固性塑料(GRP)系統.管件、配件和連接
| Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006
|
| DIN EN 14424-2005
| 帶螺旋箍的軟管管件
| Hose fittings with screwed ferrules; German version EN 14424:2004
|
| DIN EN 1452-3-1999
| 供水用塑料管道系統.無增塑聚氯乙烯(PVC-U).第3部分:管件
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings; German version EN 1452-3:1999
|
| DIN EN 1455-1-1999
| 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道、管件和系
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999
|
| DIN EN 14628-2006
| 球墨鑄鐵管、配件和附件.管外層聚乙烯涂層.要求和試驗方法
| Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods; German version EN 14628:2005
|
| DIN EN 14758-1-2006
| 無壓地下排水和污水塑料管道系統.有礦物調節劑的聚丙烯(PP-MD)管道系統.第1部分:管、管件和系統規范.德文版
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005
|
| DIN EN 14870-1-2005
| 石油和天然氣工業.管道輸送系統用進氣彎頭、管件和法蘭.第1部分:進氣彎頭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004
|
| DIN EN 14870-2-2005
| 石油和天然氣工業.管道輸送系統用進氣彎管、管件和法蘭.第2部分:管件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004
|
| DIN EN 14901-2006
| 球墨鑄鐵管、配件和附件.球墨鑄鐵配件及附件的環氧涂層(重載).要求和試驗方法
| Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods; German version EN 14901:2006
|
| DIN EN 1519-1-2000
| 建筑結構中排污(低溫和高溫)用塑料管道系統.聚乙烯(PE).第1部分:管、管件和系統的規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999
|
| DIN EN 1565-1-1999
| 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.苯乙烯共聚摻混料(SAN+PVC).第1部分:管道、管件和系
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998
|
| DIN EN 1566-1-1999
| 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).第1部分:管道、管件和系統規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998
|
| DIN EN 200-2005
| 衛生設備管件.單排閥和混合閥(PN 10).一般技術規范
| Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification; German version EN 200:2004
|
| DIN EN 545-2002
| 水管路用延性鑄鐵管道、配件、附件及其接頭.要求和試驗方法; 德文版本 EN 545:2002
| Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2002
|
| DIN EN 598-1994
| 排污設施用球墨鑄鐵管、管件、附件及連接件.要求和試驗方法
| Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods; German version EN 598:1994
|
| DIN EN 598-1994
| 排污設施用球墨鑄鐵管、管件、附件及連接件.要求和試驗方法
| Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods; German version EN 598:1994
|
| DIN EN 705-1994
| 塑料管道系統.玻璃纖維增強熱固塑料管和管件.回歸分析和應用方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994
|
| DIN EN 714-1994
| 熱塑管道系統.壓力管道和模壓管件之間無末端承載的橡膠密封圈連接件.無端部拉力的流體靜力內壓力下的密封性
| Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
|
| DIN EN 723-1996
| 銅和銅合金.燃燒法測定銅管或管件內表面碳素的方法
| Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings; German version EN 723:1996
|
| DIN EN 727-1995
| 塑料管道和管道輸送系統.熱塑塑料管和管件.維卡軟化溫度(VST)的測定; 德文版本 EN 727:1994
| Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994
|
| DIN EN 736-1-1995
| 管件.術語.第1部分:管件型號定義; 德文版本 EN 736-1:1995
| Valves - Terminology - Part 1: Definition of types of valves; German version EN 736-1:1995
|
| DIN EN 802-1994
| 塑料管道和管道輸送系統.壓力管道系統用噴鑄熱塑管件.壓碎造成最大變形的試驗方法; 德文版本 EN 802:1994
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
|
| DIN EN 803-1994
| 塑料管道系統.壓力管道用橡膠密封圈連接件的熱塑噴鑄管件.無端部拉力的抗瞬時內壓的試驗方法; 德文版本 EN
| Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
|
| DIN EN 804-1994
| 塑料管道系統.壓力管道用帶膠粘套管連接件的熱塑噴鑄管件.抗流體靜力瞬時內壓能力的試驗方法; 德文版本 EN
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
|
| DIN EN 817-1997
| 衛生設備管件.機械混合器(PN10).通用技術規范
| Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications; German version EN 817:1997
|
| DIN EN 877-2000
| 建筑物排水用鑄鐵管道、管件及其接頭和附件.要求、試驗方法和質量保證
| Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999
|
| DIN EN 877-2000
| 建筑物排水用鑄鐵管道、管件及其接頭和附件.要求、試驗方法和質量保證
| Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999
|
| DIN EN 922-1995
| 塑料管道和管道輸送系統.未增塑聚氯乙烯管和管件.測定粘度數值和K值計算用試樣制備; 德文版本 EN 922:1994
| Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value; German version EN 922:1994
|
| DIN EN 969-1995
| 燃?xì)夤艿烙们蚰T鐵管、管件、附件及其接頭.要求和試驗方法
| Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995
|
| DIN EN 969-1995
| 燃?xì)夤艿烙们蚰T鐵管、管件、附件及其接頭.要求和試驗方法
| Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995
|
| DIN EN 969/A1-1999
| 球墨鑄鐵管、管接頭、附件及其連接件.要求和試驗方法
| Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995/A1:1998
|
| DIN EN ISO 3822-1-1999
| 聲學.實驗室檢測供水設備管件和裝置噪聲.第1部分:測量方法
| Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999); German version EN ISO 3822-1:1999
|
| DIN EN ISO 3822-3-1997
| 聲學.實驗室檢測供水站裝置和設備噪音特性.第3部分:管線管件的連接和操作條件
| Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997
|
| DIN EN ISO 3822-4-1997
| 聲學.實驗室檢測供水站裝置和設備噪音特性.第4部分:特殊管件連接和操作條件
| Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997
|
| DIN EN ISO 6708-1995
| 管件.DN(公稱尺寸)的定義和選擇 (ISO 6708:1995); 德文版本 EN ISO 6708:1995
| Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995); German version EN ISO 6708:1995
|
| DIN EN ISO 8434-4-2000
| 液壓及通用金屬管件連接.第4部分:接頭焊有O形密封圈的24度錐體連接件
| Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
|
| DIN ISO 3586-1976
| 玻璃裝置.玻璃管和管件.檢驗、搬運和使用的一般規則
| Glass plant, pipeline and fittings; general rules for testing, handling and use
|
| 編號 | 中文名稱 | 英文名稱 |
|---|