| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 1344-16-1998
| 釉層精整試驗方法.第16部分.烹飪器具涂層耐熱沖擊性
| Methods of testing vitreous enamel finishes - Resistance to thermal shock of coatings on cooking utensils
|
| BS 1494-1-1964
| 建筑用固定附件規范.第1部分:板材、屋面與墻壁涂層用固定件
| Specification for fixing accessories for building purposes - Fixings for sheet, roof and wall coverings
|
| BS 2F 127-1991
| 航空航天用天然或合成彈性體涂層尼龍織物規范
| Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes
|
| BS 2X 35-2003
| 航空航天用選擇性可除去的中間涂層
| Selectively removable intermediate coating for aerospace purposes
|
| BS 3424-0-2000
| 涂層織物的試驗.各部分的索引
| Testing coated fabrics - Index of parts
|
| BS 3424-12-1996
| 涂層織物試驗.加速老化試驗
| Testing coated fabrics - Accelerated ageing tests
|
| BS 3424-13-1999
| 涂層織物試驗.光隙試驗色牢度方法的選擇指南
| Testing coated fabrics - Guide to the selection of methods for colour fastness to light testing
|
| BS 3424-1989
| 涂層織物試驗方法.第19部分:方法22A、22B 及22C.硫銹蝕性的測定
| Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining
|
| BS 3424-22-1983
| 涂覆織物試驗.方法22.聚氯乙烯涂層的熔化度和硫化橡膠涂層的硫化度測定方法
| Testing coated fabrics - Method 25 - Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings
|
| BS 3424-25-1993
| 涂覆織物試驗方法.方法25:涂層厚度和任一擴展層厚度測量方法
| Testing coated fabrics - Method 28 - Method for determination of the coating thickness and thickness of any expanded layer
|
| BS 3424-8-1983
| 涂層織物試驗.方法10A、10B及10C.低溫性能的測定方法
| Testing coated fabrics - Methods 10A, 10B and 10C - Methods for determination of low temperature performance
|
| BS 3546-2001
| 生產防水滲透布料用的涂層織物
| Coated fabrics for use in the manufacture of water penetration resistant clothing
|
| BS 3900-A10-1998
| 涂料試驗方法.液體涂料試驗(不包括化學試驗).第A10部分:通過干燥涂層的密度測量測定非揮發物質的容積百分比
| Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
|
| BS 3900-F10-1985
| 涂料試驗方法.第F集:涂料膜耐久性試驗.第10部分:海洋環境中涂層耐陰極解粘合性測定
| Methods of test for paints - Determination of resistance to cathodic disbonding of coatings for use in marine environments
|
| BS 3900-F11-1985
| 涂料試驗方法.第F集:涂料膜的耐久性試驗.第11部分:陸基地下結構用涂層耐陰極解粘合性測定
| Methods of test for paint - Durability tests on paint films - Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures
|
| BS 3900-F17-1998
| 涂料試驗方法.第F節：涂料膜的耐久性試驗.第17部分：涂層耐濕刮和清潔度的測定
| Methods of test for paint. Durability tests on paint films. Determination of wet-scrub resistance and cleanability of coatings
|
| BS 3900-J1-1993
| 涂料的試驗方法.第J1部分：涂層粉末試驗.涂層粉末取樣
| Methods of test for paints. Testing of coating powders. Sampling of coating powders
|
| BS 3900-J11-1997
| 涂料試驗方法.粉末涂層的試驗.第J11部分:涂覆粉末流測定(斜面變型法)
| Methods of test for paints - Testing of coating powders - Determination of flow of coating powders (inclined-plane method)
|
| BS 3900-J2-1993
| 涂料試驗方法.第J2部分:粉末涂層粒徑分布篩分測定
| Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
|
| BS 3900-J3-1998
| 涂料試驗方法.涂粉試驗.第J3部分:涂層粉末凝膠時間測定
| Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders
|
| BS 3900-J5-1993
| 涂料試驗方法.第J5部分:粉末涂層加熱質量損失測定
| Methods of test for paints - Testing of coating powders - Determination of loss of mass of coating powders on heating
|
| BS 3900-J6-1993
| 涂料試驗方法.第J6部分:粉末涂層試驗.用氣體比對測重計測定粉末涂層密度(參照法)
| Methods of test for paints - Testing of coating powders - Determination of density of coating powders by gas comparison pyknometer (referee method)
|
| BS 3900-J7-1993
| 涂料試驗方法.第J7部分:粉末涂層試驗.用液體位移比重計測定粉末涂層密度
| Methods of test for paints - Testing of coating powders - Determination of density of coating powders by liquid displacement pyknometer
|
| BS 3900-J8-1993
| 涂料的試驗方法.第J8部分:粉末涂層防爆下限的計算
| Methods of test for paints - Testing of coating powders - Calculation of lower explosion limit of coating powders
|
| BS 3900-J9-1993
| 涂料試驗方法.第J9部分:粉末涂層/氣體混合物流動特性測定
| Methods of test for paints - Testing of coating powders - Determination of flow properties of a coating powder/air mixture
|
| BS 4393-1991
| 組件終端用可焊錫或錫-鉛涂層導線規范
| Specification for solderable tin or tin-lead coated wires for component terminations
|
| BS 4842-1984
| 凃用于外部建筑的鋁合金擠壓件、薄板材和預成型件上的液態有機涂層和液態有機涂層的規范
| Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings
|
| BS 5367-1976
| 涂層磨料的尺寸
| Dimensions of coated abrasives
|
| BS 5599-1993
| 工程用鋁及其合金強陽極氧化涂層規范
| Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
|
| BS 5664-3.11-1995
| 電絕緣不溶可聚合樹脂化合物.第3部分:各型材料規范.第11節:環氧樹脂基涂層粉末
| Solventless polymerisable resinous compounds used for electrical insulation - Specification for individual materials - Epoxy resin-based coating powders
|
| BS 5790-2-1995
| 室內裝飾用涂覆織物.第2部分:聚氯乙烯涂層機織物規范
| Coated fabrics for upholstery - Specification for PVC coated woven fabrics
|
| BS 6359-1983
| 縮微平片標題涂層(彩色條)尺寸和位置規范
| Specification for dimensions and position of microfiche heading coating (colour stripe)
|
| BS 6404-12-1993
| 磁性材料.第12部分:層間隔熱涂層保溫性能的評定方法指南
| Magnetic materials - Guide to methods of assessment of temperature capability of interlaminar insulation coatings
|
| BS 6404-20-1996
| 磁性材料.第20部分:絕緣涂層的電阻和溫度分類
| Magnetic materials - Resistance and temperature classification of insulation coatings
|
| BS 6408-1983
| 防潮濕天氣用的涂層織物雨衣規范
| Specification for clothing made from coated fabrics for protection against wet weather
|
| BS 6496-1984
| 施加并焙固于鋁合金的擠壓材、板材和預成型材(外部建筑用)的粉末有機涂層和帶有粉末有機涂層的鋁合金擠壓材
| Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
|
| BS 6949-1991
| 與飲用水接觸除外的冷用瀝青基涂層規范
| Specification for bitumen-based coatings for cold application excluding use in contact with potable water
|
| BS 7079-A1 Supplement 1-1996
| 涂料和有關產品涂層前鋼基片的制備.第A1集:表面清潔度目測評定.第1部分:采用不同磨料進行噴沙除銹時鋼片表
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
|
| BS 7079-A1-1989
| 涂料和有關產品應用前鋼基片的制備.表面清潔度視覺評定.未涂層鋼基片和鋼基片全部清除原涂層以后生銹程度和
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Specification for rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
| BS 7079-A2-1996
| 涂料和有關產品涂層前鋼基片的制備.第A2集:表面清潔度目測評定.第1部分:局部清除原涂層后原涂層的鋼片底基
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
| BS 7079-B3-1993
| 涂料和有關產品應用前鋼基片的制備.表面清潔度評定方法.第B3部分:準備涂層(壓敏帶方法)的鋼基面塵垢評定
| Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
| BS 7371-1-1991
| 金屬緊固件涂層.一般要求和選擇指南規范
| Coatings on metal fasteners - Specification for general requirements and selection guidelines
|
| BS 7371-10-1994
| 金屬緊固件涂層.第10部分:有機涂層規范
| Coatings on metal fasteners - Specification for organic coatings
|
| BS 7371-2-1993
| 金屬緊固件涂層.扭矩/夾緊力關系式規范
| Coatings on metal fasteners - Specification for torque/clamping force relationship
|
| BS 7371-4-1994
| 金屬緊固件涂層.第4部分:電鍍鎳、鎳/鉻和銅/鎳/鉻涂層規范.
| Coatings on metal fasteners - Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings
|
| BS 7371-6-1998
| 金屬緊固件涂層.熱浸鍍鋅涂層的規范
| Coatings on metal fasteners - Specification for hot dipped galvanized coatings
|
| BS 7371-7-1994
| 金屬緊固件涂層.采用機械法施加鋅涂層規范
| Coatings on metal fasteners - Specification for mechanically applied zinc coatings
|
| BS 7371-8-1998
| 金屬緊固件涂層.粉末鍍鋅涂層規范
| Coatings on metal fasteners - Specification for sherardized coatings
|
| BS 7371-9-1996
| 金屬緊固件涂層.磷酸鹽涂層或油涂層規范
| Coatings on metal fasteners - Specification for phosphate or phosphate and oil coatings
|
| BS 7442-0-1991
| 橡膠或塑料涂層輥?zhàn)?第0部分:導言
| Rubber or plastics covered rollers - Introduction
|
| BS 7442-1-1991
| 有橡膠或塑料涂層的輥?zhàn)?術語詞匯
| Rubber or plastics covered rollers - Glossary of terms
|
| BS 7442-2-1991
| 有橡膠或塑料涂層的輥?zhàn)?第2部分:由買方提供的技術信息推薦標準
| Rubber or plastics covered rollers - Recommendations for technical information to be provided by the purchaser
|
| BS 7442-3.1-1998
| 橡膠或塑料涂層的輥?zhàn)?試驗方法.表觀硬度測定(IRHD方法)
| Rubber or plastics covered rollers - Method of test - Determination of apparent hardness (IRHD method)
|
| BS 7442-3.2-1991
| 有橡膠或塑料涂層輥?zhàn)?第3部分:試驗方法.第2節:肖氏(SHORE)硬度測定
| Rubber or plastics covered rollers - Method of test - Determination of Shore hardness
|
| BS 7442-3.3-1992
| 橡膠或塑料涂層的輥?zhàn)?第3部分:試驗方法.第3節:采用普西和瓊斯法測定表面硬度
| Rubber or plastics covered rollers - Method of test - Determination of apparent hardness by the Pusey and Jones method
|
| BS 7442-4.1-1992
| 有橡膠或塑料涂層輥?zhàn)?要求.表觀硬度規范
| Rubber or plastics covered rollers - Requirements - Specification for apparent hardness
|
| BS 7442-4.2-1994
| 有橡膠或塑料涂層的輥?zhàn)?要求.表面精度分類
| Rubber or plastics covered rollers - Requirements - Classification by surface finish
|
| BS 7442-4.3-1993
| 有橡膠或塑料涂層輥?zhàn)?第4部分:要求.第3節:尺寸公差規范
| Rubber or plastics covered rollers - Requirements - Specification for dimensional tolerances
|
| BS 7664-2000
| 底涂層和表面精制涂料規范
| Specification for undercoat and finishing paints
|
| BS 7793-1-1995
| 螺栓固定鋼板的瓷釉涂層.農業用泥漿罐的螺栓固定鋼板的涂層規范
| Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in agricultural slurry tanks
|
| BS 7793-2-1996
| 栓接鋼板用瓷釉涂層.第2部分:工業液體儲罐用栓接鋼板瓷釉涂層規范
| Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
|
| BS 7822-3-1995
| 低壓系統設備的絕緣調整.第3部分:印制電路板組件為達到絕緣調整的涂層使用
| Insulation coordination for equipment within low-voltage systems - Use of coatings to achieve insulation coordination of printed board assemblies
|
| BS 8000-12-1989
| 建筑工地操作工藝.第12部分:裝飾墻面涂層和涂漆實用規程
| Workmanship on building sites - Code of practice for decorative wallcoverings and painting
|
| BS 8202-1-1995
| 建筑構件的防火涂層.無機物噴涂的選擇與設置實用規程
| Coatings for fire protection of building elements - Code of practice for the selection and installation of sprayed mineral coatings
|
| BS 8202-2-1992
| 建筑構件的防火涂層.防火用金屬襯底膨脹涂層使用實用規程
| Coatings for fire protection of building elements - Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
|
| BS 8216-1991
| 建筑物用隔熱和吸聲噴涂輕質礦物涂層實用規程
| Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
|
| BS A 303-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱12角螺栓頭標稱桿
| Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 304-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋的由金屬材料制成的標稱12角螺栓頭標稱或節徑桿螺
| Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 307-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋由金屬材料制成的標稱花鍵頭、標稱或節徑桿螺栓.
| Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 308-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱花鍵頭標稱桿螺栓
| Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 309-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋的由金屬材料制成的大六角頭標稱或節徑桿螺栓.尺
| Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 310-1995
| 強度等級小于或等于1250MPa-1800MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱大12角螺
| Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions
|
| BS A 311-1997
| 航空航天.強度級小于或等于1100 MPa的涂層或未涂層金屬材料標稱桿短長度或中等長度MJ螺紋的內部偏移十字形
| Aerospace - Screws, 100 ° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 312-1997
| 強度級小于或等于1100MPa的涂層或未涂層金屬材料制階梯形桿、短長度或中等長度MJ螺紋的內偏移十字形肋狀或
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 313-1997
| 航空航天.強度級小于或等于1100MPa的涂層或未涂層金屬材料制節徑桿長長度MJ螺紋的內偏移十字形肋狀或非肋狀
| Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 322-1998
| 內分支凸型或非凸型驅動的金屬材料涂層或未土層的強度級低于或等于1100Mpa的平頭帶螺紋螺釘.尺寸
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 331-1998
| 強度級小于或等于1275MPa的涂層或未涂層金屬材料制標稱或節徑桿長長度MJ螺紋扎制雙六角頭螺拴.尺寸
| Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions
|
| BS DD CEN/TS 1071-10-2004
| 高級工業陶瓷.陶瓷涂層的試驗方法.橫切法測定涂層厚度
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by cross section
|
| BS DD CEN/TS 1071-11-2007
| 高級工業陶瓷.陶瓷涂層的試驗方法.利用Stoney公式計算內應力
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of internal stress by the Stoney formula
|
| BS DD CEN/TS 1071-7-2003
| 高級工業陶瓷.陶瓷涂層的試驗方法.用儀器化刻痕試驗測定硬度及楊式模量
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of hardness and Young's modulus by instrumented indentation testing
|
| BS DD CEN/TS 1071-8-2005
| 高級工業陶瓷.陶瓷涂層的試驗方法.粘著性評定用洛氏針入試驗
| Advanced technical ceramics - Methods of text for ceramic coatings - Rockwell indentation test for evaluation of adhesion
|
| BS DD CEN/TS 14234-2003
| 與食品接觸的材料和物品.紙和紙板的聚合物涂層.總遷移的條件和試驗方法的選擇指南
| Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration
|
| BS DD CEN/TS 14235-2003
| 與食品接觸的材料和物品.金屬基上的聚合物涂層.總遷移的條件和試驗方法的選擇指南
| Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
|
| BS DD ENV 1071-5-1995
| 高級工業陶瓷.陶瓷涂層的試驗方法.孔隙率測定
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of porosity
|
| BS DD ENV 1071-6-2002
| 高級工業陶瓷.陶瓷涂層的試驗方法.用微磨損損耗試驗測定耐磨性
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test
|
| BS EN 10169-2-2006
| 連續有機涂層(盤繞涂層)變平鋼軋材.建筑物外部用品
| Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
|
| BS EN 10169-3-2003
| 連續有機涂層(盤繞涂層)變平鋼軋材.建筑物內部用品
| Continuously organic coated (coil coated) steel flat products - Products for building interior applications
|
| BS EN 10202-2001
| 冷縮電解鉻產品.電解錫板和電解鉻氧化涂層鋼
| Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
|
| BS EN 10244-1-2001
| 鋼絲及其制品.鋼絲上的非有色金屬涂層.一般原理
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles
|
| BS EN 10244-2-2001
| 鋼絲及其制品.鋼絲上的非有色金屬涂層.鋅和鋅合金涂層
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc alloy coatings
|
| BS EN 10244-3-2001
| 鋼絲及其制品.鋼絲上的非有色金屬涂層.鋁涂層
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Aluminium coatings
|
| BS EN 10244-4-2001
| 鋼絲及其制品.鋼絲上的非有色金屬涂層.錫涂層
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Tin coatings
|
| BS EN 10244-5-2001
| 鋼絲及其制品.鋼絲上的非有色金屬涂層.鎳涂層
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Nickel coatings
|
| BS EN 10244-6-2001
| 鋼絲及其制品.鋼絲上的非有色金屬涂層.銅,青銅或黃銅涂層
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Copper, bronze or brass coatings
|
| BS EN 10245-1-2001
| 鋼絲及其制品.鋼絲上的有機涂層.一般規則
| Steel wire and wire products - Organic coatings on steel wire - General rules
|
| BS EN 10245-2-2001
| 鋼絲及其制品.鋼絲上的有機涂層.PVC精制線
| Steel wire and wire products - Organic coatings on steel wire - PVC finished wire
|
| BS EN 10245-3-2001
| 鋼絲及其制品.鋼絲上的有機涂層.PE涂層線
| Steel wire and wire products - Organic coatings on steel wire - PE coated wire
|
| BS EN 10245-4-2003
| 鋼絲和鋼絲產品.鋼絲上的有機涂層.聚酯涂覆鋼絲
| Steel wire and wire products - Organic coatings on steel wire - Polyester coated wire
|
| BS EN 10288-2002
| 岸上和近海管道用鋼管及配件.外部的雙層擠壓聚乙烯基涂層
| Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
|
| BS EN 10290-2002
| 岸上和近海輸油管用鋼管和配件.用于外部液體的聚氨酯和改性聚氨酯脂涂層
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
|
| BS EN 10300-2005
| 近岸和海上管道用鋼管和配件.外涂層用瀝青熱涂覆材料
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
|
| BS EN 10301-2003
| 岸上及海底管道用鋼管及配件.非腐蝕性氣體的輸送用減少摩擦的內涂層
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
|
| BS EN 10310-2004
| 岸上和海底管路用鋼管和配件.聚酰胺粉末基內外涂層
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
|
| BS EN 1071-4-2006
| 高級工業陶瓷.陶瓷涂層的試驗方法.用電子探針微量分析(EPMA)測定化學成分
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of chemical composition by electron probe microanalysis (EPMA)
|
| BS EN 1096-1-1999
| 建筑玻璃.涂層玻璃.定義和分類
| Glass in building - Coated glass - Definitions and classification
|
| BS EN 1096-2-2001
| 建筑物玻璃.涂層玻璃.A,B,S涂層的要求和試驗方法
| Glass in building - Coated glass - Requirements and test methods for class A, B and S coatings
|
| BS EN 1096-3-2001
| 建筑物玻璃.涂層玻璃.C,D涂層的要求和試驗方法
| Glass in building - Coated glass - Requirements and test methods for class C and D coatings
|
| BS EN 1096-4-2004
| 建筑玻璃.涂層玻璃.合格評價/產品標準
| Glass in building - Coated glass - Evaluation of conformity/Product standard
|
| BS EN 12068-1999
| 陰極保護.埋于地下的或浸于水中的鋼管外部防腐有機涂層.磁帶和可縮材料
| Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
|
| BS EN 12206-1-2004
| 顏料和清漆.建筑用鋁和鋁合金涂層.涂覆粉末制涂層
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder
|
| BS EN 12280-1-1998
| 橡膠或塑料涂層織物.加速老化試驗.熱老化
| Rubber- or plastics-coated fabrics - Accelerated ageing tests - Heat ageing
|
| BS EN 12280-2-2002
| 橡膠或塑料涂層織物.加速老化試驗.物理性老化:光和氣候的影響
| Rubber- or plastics-coated fabrics - Accelerated ageing tests - Physical ageing: effect of light or weathering
|
| BS EN 12280-3-2002
| 橡膠或塑料涂層織物.加速老化試驗.環境老化
| Rubber- or plastics-coated fabrics - Accelerated ageing tests - Environmental ageing
|
| BS EN 12373-10-1999
| 鋁和鋁合金.陽極氧化.使用磨損射流設備測定陽極氧化鍍涂層主要特殊磨損抗性
| Aluminium and aluminium alloys - Anodizing - Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
|
| BS EN 12373-2-1999
| 鋁和鋁合金.陽極氧化.陽極氧化涂層單位面積(表面密度)質量的測定.重量劑法
| Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
|
| BS EN 12373-3-1999
| 鋁和鋁合金.陽極氧化.陽極氧化涂層單位面積(表面密度)質量的測定.分束顯微鏡無損測量
| Aluminium and aluminium alloys - Anodizing - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
|
| BS EN 12472-2005
| 涂層部件鎳釋放量的檢測用磨損和腐蝕的模擬方法
| Method for the simulation of wear and corrosion for the detection of nickel release from coated items
|
| BS EN 12487-2007
| 金屬的腐蝕防護.鋁和鋁合金上經清洗和未清洗的鉻酸鹽轉化涂層
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
|
| BS EN 12508-2000
| 金屬和合金的腐蝕保護.表面處理,金屬和其它無機涂層.術語
| Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary
|
| BS EN 12757-1-2005
| 涂層材料用攪拌機械.安全要求.車輛表面整修用的攪料機械
| Mixing machinery for coating materials - Safety requirements - Mixing machinery for use in vehicle refinishing
|
| BS EN 12981-2005
| 涂層設備.噴涂有機粉末涂層材料的噴涂室.安全要求
| Coating plants - Spray booths for application of organic powder coating material - Safety requirements
|
| BS EN 13113-2002
| 制革機.滾動涂層機的安全性要求
| Tannery machines - Roller coating machines - Safety requirements
|
| BS EN 13144-2003
| 金屬和其他無機涂層.用抗拉試驗定量測量粘著性的方法
| Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
|
| BS EN 13266-2002
| 緩慢釋放化肥.用涂層肥料法測定營養釋放性能
| Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers
|
| BS EN 13360-2002
| 橡膠或塑料涂層織物.術語
| Rubber- or plastics-coated fabrics - Terminology
|
| BS EN 13438-2005
| 涂料和清漆.建筑用鍍鋅或鍍鋅粉鋼產品用的粉末有機涂層
| Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes
|
| BS EN 13523-1-2001
| 卷材覆層金屬.試驗方法.涂層厚度
| Coil coated metals - Test methods - Coating thickness
|
| BS EN 13676-2001
| 接觸食品的聚合物涂層紙和紙板.針孔檢測
| Polymer coated paper and board intended for food contact - Detection of pinholes
|
| BS EN 13811-2003
| 粉末鍍鋅.鐵產品上鋅擴散涂層.規范
| Sherardizing - Zinc diffusion coatings on ferrous products - Specification
|
| BS EN 13920-15-2003
| 鋁和鋁合金.廢料.已去除廢鋁包裝件中涂層的鋁廢料
| Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings
|
| BS EN 13938-6-2004
| 民用爆炸物.推進劑和火箭推進劑.固態火箭推進劑.抑制劑涂層完整性的測定指南
| Explosives for civil uses - Propellants and rocket propellants - Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings
|
| BS EN 13966-1-2003
| 液態涂層材料用霧化及噴涂設備輸送效率的測定.平板條
| Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Flat panels
|
| BS EN 1403-1998
| 金屬腐蝕防護.電鍍涂層.一般要求的規定方法
| Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements
|
| BS EN 14099-2002
| 航天產品保證.用壓敏帶測量涂層的剝離和撕開強度
| Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
|
| BS EN 14431-2005
| 釉和搪瓷.用于建筑鋼板的瓷釉涂層的特性
| Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture
|
| BS EN 14628-2005
| 球墨鑄鐵管、配件和附件.管道外部聚乙烯涂層.要求和試驗方法
| Ductile iron pipes, fittings and accessories - External polythene coating for pipes - Requirements and test methods
|
| BS EN 14863-2005
| 釉瓷和搪瓷.熱交換器中使用的涂搪瓷鋼板的邊緣涂層的測定
| Vitreous and porcelain enamels — Determination of the edge covering on enamelled steel plate to be used in heat exchangers
|
| BS EN 14879-1-2005
| 工業設備防腐蝕介質腐蝕用有機涂層系統和內襯.襯底的術語、設計和制備
| 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Terminology, design and preparation of substrate
|
| BS EN 14879-2-2006
| 防止工業裝置和設備受侵蝕物體腐蝕用有機涂覆系統和襯料.第2部分:金屬構件涂層
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media — Part 2: Coatings on metallic components
|
| BS EN 14879-3-2006
| 防止侵蝕物體腐蝕工業裝置和設備用有機涂層系統和襯料.第3部分:混凝土構件涂層
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media — Part 3: Coatings on concrete components
|
| BS EN 14879-4-2007
| 防止工業裝置和設備受侵入介質腐蝕的有機涂層系統和襯料.金屬構件襯料
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Linings on metallic components
|
| BS EN 14879-5-2007
| 防止工業裝置和設備受侵入介質腐蝕的有機涂層系統和襯料.混凝土構件襯料
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Linings on concrete components
|
| BS EN 14882-2005
| 橡膠或塑料涂層織物.靜摩擦和動摩擦系數的測定
| Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction
|
| BS EN 14901-2006
| 球墨鑄鐵管、配件和附件.球墨鑄鐵配件及附件的環氧涂層(重載).要求和試驗方法
| Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
|
| BS EN 15189-2006
| 球墨鑄鐵管、配件和附件.管道外部聚亞安酯涂層.要求和試驗方法
| Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
|
| BS EN 15205-2006
| 測定防腐涂層六價鉻元素.質量分析
| Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis
|
| BS EN 15340-2007
| 熱噴涂.熱噴涂層耐剪切負荷的測定
| Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
|
| BS EN 1876-1-1998
| 橡膠或塑料涂層織物.低溫試驗.彎曲試驗
| Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
|
| BS EN 1910-2000
| 木材、拼花地板和木材鑲板及涂層.尺寸穩定性測定
| Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability
|
| BS EN 2437-2002
| 航空航天系列.鋁及鋁合金的鉻酸鹽轉化涂層(黃色)
| Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
|
| BS EN 2591-508-2002
| 電氣和光學連接元件.試驗方法.觸點涂層厚度的測量
| Elements of electrical and optical connection - Test methods - Measurement of thickness of coating on contacts
|
| BS EN 2591-509-2001
| 電氣和光學連接元件.試驗方法.觸點涂層的附著力
| Elements of electrical and optical connection - Test methods - Adhesion of coating on contacts
|
| BS EN 28094-1994
| 輸送機用鋼絲簾布輸送帶.夾芯層涂層粘附強度試驗
| Steel cord conveyor belts - Adhesion strength test of the cover to the core layer
|
| BS EN 2828-1993
| 采用拋光法對金屬涂層的粘合試驗
| Adhesion test for metallic coatings by burnishing
|
| BS EN 4421-2007
| 航空航天系列.帶鋸齒狀、耐腐蝕鋼鎖緊環的、鍍MoS2涂層的、TI-P64001鈦合金螺柱.強度等級:1100MPa(環境溫度
| Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature)
|
| BS EN 4458-2005
| 航空航天系列.帶鋸齒狀鎖緊環耐腐蝕鋼鍍MoS2涂層的TI-P64001型鈦合金MJ螺紋螺柱.強度等級:1100MPa(室溫).技
| Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001 , MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature) - Technicalspecification
|
| BS EN 4496-2005
| 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽沉頭標稱100 °螺釘.等級
| Aerospace series - Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4497-2005
| 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽盤頭螺釘.等級:1100MPa(
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4498-2005
| 航空航天系列.有色鋁涂層、鈍化的、耐熱鎳基合金、中等長度螺紋、緊公差標稱桿、大雙六角頭螺栓.等級:1550M
| Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C
|
| BS EN 4501-2006
| 航空航天系列.帶鍍鋁涂層的陽極電鍍鈦合金短螺紋緊公差標準柄正六角頭螺栓、米制系列.等級:1100MPa(室溫)/3
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4509-2006
| 航空航天系列.帶鍍鋁涂層陽極氧化的鈦合金螺紋延伸到螺頭100°沉頭偏置十字凹槽螺釘、米制系列.等級:1100MP
| Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C
|
| BS EN 582-1994
| 熱噴涂層的試驗.抗拉膠粘強度的測定
| Thermal spraying - Determination of tensile adhesive strength
|
| BS EN 60317-1996
| 特殊型繞組線規范.聚酰亞胺涂層的軟焊聚酰胺酯包漆圓銅線.130類
| Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130
|
| BS EN 60317-21-1996
| 特種繞組線規范.聚酰亞胺涂層的軟釬焊聚酰胺酯漆包圓銅線.155類
| Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
|
| BS EN 60684-3-300-2002
| 絕緣軟套管.各種型號軟套管規范要求.無涂層的玻璃纖維編織軟套管
| Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving, braided, uncoated
|
| BS EN 60684-3-343 to 345-2002
| 絕緣軟套管規范.各種型號套管的規范要求.無涂層可擴張編織的乙烯-三氟氯乙烯(E-CTFE)紡織套管
| Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
|
| BS EN 61249-5-4-1997
| 內部連接結構材料.有或無涂層的導電箔和導電膜分規范.導電墨水
| Materials for interconnection structures - Sectional specification set for conductive foils and films with and without coatings - Conductive inks
|
| BS EN 61249-8-7-1997
| 互連接結構用材料.不導電薄膜和涂層分規范.打印油墨
| Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Marking legend inks
|
| BS EN 61249-8-8-1997
| 連接結構用材料.非導電膜和涂層分規范.臨時聚合物規范
| Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Temporary polymer coatings
|
| BS EN 61788-3-2006
| 超導性.臨界電流測量.涂層銀或銀合金的Bi-2212和Bi-2223氧化超導體的直流臨界電流
| Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
|
| BS EN 846-13-2001
| 圬工用的輔助部件的試驗方法.有機涂層耐沖擊性、耐磨性及耐腐蝕性的測定
| Methods of test for ancillary components for masonry - Determination of resistance to impact, abrasion and corrosion of organic coatings
|
| BS EN ISO 105-X10-1996
| 紡織品.色牢度試驗.第X10部分:紡織品顏色向聚氯乙烯涂層遷移的評定
| Textiles - Tests for colour fastness - Assessment of migration of textile colours into polyvinyl chloride coatings
|
| BS EN ISO 11124-2-1994
| 用涂層材料及有關產品涂覆前鋼基體的準備工作.金屬噴情理磨料的規范.冷淬鐵砂粒
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Chilled-iron grit
|
| BS EN ISO 11124-4-1994
| 用涂層材料涂覆前鋼基體的預處理.噴射金屬清理磨料的規范.低碳鑄鋼丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Low-carbon cast-steel shot
|
| BS EN ISO 11507-2007
| 涂料和清漆.涂層暴露于人工風蝕.暴露于熒光紫外燈和水
| Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
|
| BS EN ISO 11644-2003
| 皮革.涂層粘著牢度測定方法
| Leather - Test for adhesion of finish
|
| BS EN ISO 11998-2006
| 涂料和清漆.涂層耐濕洗和清潔度的測定
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
|
| BS EN ISO 12683-2004
| 機械鍍鋅涂層.規范和試驗方法
| Mechanically deposited coatings of zinc - Specification and test methods
|
| BS EN ISO 12944-1-1998
| 涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.一般說明
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - General introduction
|
| BS EN ISO 12944-2-1998
| 涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.環境的分類
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Classification of environments
|
| BS EN ISO 12944-3-1998
| 涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.設計所需考慮的諸因素
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Design considerations
|
| BS EN ISO 12944-4-1998
| 涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.表面類型和表面予處理制備
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Types of surface and surface preparation
|
| BS EN ISO 12944-6-1998
| 涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.實驗室性能試驗方法
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods
|
| BS EN ISO 12944-7-1998
| 涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.涂漆工藝的實施和管理
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Execution and supervision of paintwork
|
| BS EN ISO 12944-8-1998
| 涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.新工藝作及維修規范的編制
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Development of specifications for new work and maintenance
|
| BS EN ISO 1421-1998
| 橡膠或塑料涂層織物.拉伸強度和斷裂伸長率的測定
| Rubber-or plastics-coated fabrics - Determination of tensile strength and elongation at break
|
| BS EN ISO 14373-2007
| 電阻焊接.無涂層和有涂層低碳鋼的點焊程序
| Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
|
| BS EN ISO 1460-1995
| 金屬鍍層.鐵類材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量
| Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
|
| BS EN ISO 14713-1999
| 鐵和鋼結構的防腐.鋅和鋁涂層.指南
| Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines
|
| BS EN ISO 15695-2001
| 釉瓷和搪瓷.搪瓷涂層耐劃痕性的測定
| Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes
|
| BS EN ISO 15720-2001
| 金屬覆層.孔隙率試驗.凝膠材料電譜法測定金屬基體上金或鈀涂層的孔隙率
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
|
| BS EN ISO 15721-2001
| 金屬覆層.孔隙率試驗.用亞硫酸和二氧化硫蒸汽對金和鈀涂層孔隙率的測定
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
|
| BS EN ISO 16276-1-2007
| 防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂強度)的評定和驗收標準.脫落測試
| Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing
|
| BS EN ISO 16276-2-2007
| 防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂強度)的評定和驗收標準.劃格測試和X切割測試
| Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing
|
| BS EN ISO 16348-2003
| 金屬和其他無機涂層.定義和表觀約定
| Metallic and other inorganic coatings - Definitions and conventions concerning appearance
|
| BS EN ISO 16773-1-2007
| 涂料和清漆.高阻抗涂層試樣的電氣化學阻抗頻譜(EIS).術語和定義
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Terms and definitions
|
| BS EN ISO 16773-2-2007
| 涂料和清漆.高阻抗涂層試樣的電氣化學阻抗頻譜(EIS).數據收集
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Collection of data
|
| BS EN ISO 17186-2003
| 皮革.物理和機械試驗.表面涂層厚度的測定
| Leather - Physical and mechanical tests - Determination of surface coating thickness
|
| BS EN ISO 17233-2003
| 皮革.物理和機械試驗.表面涂層低溫龜裂溫度的測定
| Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
|
| BS EN ISO 17834-2003
| 熱噴涂.高溫腐蝕和氧化防護涂層
| Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures
|
| BS EN ISO 17872-2007
| 涂料和清漆.腐蝕試驗用金屬板涂層畫線器標記的入門指南
| Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
|
| BS EN ISO 20566-2005
| 涂料和清漆.實驗室洗車測定涂層系統的耐劃痕性
| Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
|
| BS EN ISO 20567-1-2005
| 涂料和清漆.涂層耐石片劃痕測定.多沖擊測試
| Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing
|
| BS EN ISO 20567-2-2005
| 涂料和清漆.涂層耐石片劃痕測定.帶導向沖擊體的單沖擊試驗
| Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body
|
| BS EN ISO 21227-2-2007
| 涂料和清漆.用光學成象評估涂層表面缺陷.多功能石頭切割試驗的評定規程
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation procedure for multi-impact stone-chipping test
|
| BS EN ISO 21227-3-2007
| 涂料和清漆.用光學成象評定涂層表面缺陷.劃痕周圍剝層和腐蝕的評定
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation of delamination and corrosion around a scribe
|
| BS EN ISO 2286-2-1998
| 橡膠或塑料涂覆織物.卷料參數的測定.涂料單位面積總質量、單位涂層面積的質量和基體單位面積質量的測定方法
| Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
|
| BS EN ISO 2411-2000
| 橡膠或塑料涂層織物.涂層粘合力的測定
| Rubber or plastics-coated fabrics - Determination of coating adhesion
|
| BS EN ISO 2808-2007
| 色漆和清漆.涂層厚度的測定
| Paints and varnishes - Determination of film thickness
|
| BS EN ISO 2810-2004
| 色漆和清漆.涂層的自然風化.暴露和評定
| Paints and varnishes - Natural weathering of coatings - Exposure and assessment
|
| BS EN ISO 3868-1995
| 金屬和其他無機物涂層.涂層厚度測量.菲索(Fizeau)多光束干涉儀法
| Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
|
| BS EN ISO 4543-1995
| 金屬鍍層和其它無機物涂層.儲存腐蝕試驗一般規程
| Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions
|
| BS EN ISO 4628-6-2007
| 涂料和清漆.涂層降解的評定.缺陷數量和大小及外表均衡變化強度的標識.用粘膠帶法評估粉化等級
| Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of chalking by tape method
|
| BS EN ISO 5470-2-2003
| 橡膠或塑料涂層織物.耐磨損性測定.馬丁代爾研磨器
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Martindale abrader
|
| BS EN ISO 6179-2001
| 硫化或熱塑橡膠.橡膠薄板和橡膠涂層織物.揮發性液體擴散速度的測定(重力測重技術)
| Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
|
| BS EN ISO 6945-1996
| 橡膠軟管.外涂層耐磨性的測定
| Rubber hoses - Determination of abrasion resistance of the outer cover
|
| BS EN ISO 6988-1986
| 金屬涂層和其它無機物涂層.普通水汽冷凝二氧化硫試驗
| Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture
|
| BS EN ISO 7623-1996
| 鋼絲繩芯輸送帶.纜索涂層粘合力試驗.初始試驗和后期熱量處理
| Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment
|
| BS EN ISO 8501-1-2007
| 涂料和相關產品使用前鋼襯底的處理.表面清潔度的目測評估.未涂覆鋼襯底和徹底清除原有涂層后鋼襯底的銹蝕等
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
| BS EN ISO 8501-2-1996
| 涂油漆和有關產品前鋼基底預處理.表面清潔度的目視評定.局部去除原有涂層后鋼基底的處理等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
| BS EN ISO 8980-4-2006
| 眼科光學.未切邊的成品眼鏡片.防反射涂層規范和試驗方法
| Ophthalmic optics - Uncut finished spectacle lenses - Specifications and test methods for anti-reflective coatings
|
| BS F 131-1986
| 航空航天用氯磺化聚乙烯橡膠涂層尼龍織物(300g/m)規范
| Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m2) for aerospace purposes
|
| BS F 136-1989
| 航空航天用氯磺化聚乙烯橡膠涂層尼龍織物(190g/m**2)規范
| Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m2) for aerospace purposes
|
| BS G 211-1971
| 儀表窗口與光楔降低反射涂層規范
| Specification for reflection-reducing coating of instrument windows and lighting wedges
|
| BS ISO 10110-9-1996
| 光學及光學儀器.光學元件和系統圖紙的制備.第9部分:表面處理和涂層
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating
|
| BS ISO 10587-2000
| 金屬和其它無機覆層.金屬覆層和非涂層外螺紋件和棒材殘余脆性試驗
| Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method
|
| BS ISO 10713-1997
| 珠寶.金合金涂層
| Jewellery - Gold alloy coatings
|
| BS ISO 13779-4-2002
| 外科植入物.羥磷灰石.涂層粘結強度的測定
| Implants for surgery - Hydroxyapatite - Determination of coating adhesion strength
|
| BS ISO 1434-1996
| 包裝式天然橡膠.包裝涂層量的測定
| Natural rubber in bales - Amount of bale coating - Determination
|
| BS ISO 14647-2000
| 金屬涂層.金屬基質金涂層孔隙率的測定.硝酸蒸發試驗
| Metallic coatings - Determination of porosity on gold coatings on metallic substrates - Nitric acid vapour test
|
| BS ISO 14656-2000
| 混凝土加筋鋼涂層用環氧樹脂粉末和密封材料
| Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
|
| BS ISO 14788-2005
| 連續熱浸鍍鋅5%鋁合金涂層鋼薄板
| Continuous hot-dip zinc-5% aluminium alloy coated steel sheet
|
| BS ISO 15724-2001
| 金屬和其它無機涂層.鋼的可擴散氫的電化測量.茗荷芥(Barnacle)電極法
| Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method
|
| BS ISO 15730-2001
| 金屬和其他無機涂層.采用電解拋光精加工和鈍化不銹鋼
| Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel
|
| BS ISO 15741-2002
| 油漆和清漆.岸上和近海鋪設的無腐蝕氣體鋼管道內側的減小摩擦涂層
| Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
|
| BS ISO 16132-2004
| 球墨鑄鐵管和配件.水泥灰漿襯套的密封涂層
| Ductile iron pipes and fittings - Seal coats for cement mortar linings
|
| BS ISO 16172-2006
| 波紋鋼管用連續熱浸金屬涂層鋼板
| Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
|
| BS ISO 20566-2005
| 色漆和清漆.通過實驗室洗車測定涂層系統的耐劃痕性
| Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
|
| BS ISO 20567-1-2005
| 色漆和清漆.涂層的耐石片劃性的測定.多沖擊試驗
| Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing
|
| BS ISO 20567-2-2005
| 色漆和清漆.涂層的耐石片劃性的測定.導向沖擊體單沖擊試驗
| Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body
|
| BS ISO 22778-2006
| 金屬涂層.在鐵和鋼表面上物理蒸發沉淀鎘.規范和試驗方法
| Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods
|
| BS ISO 3011-1997
| 橡膠或塑料涂層織物.靜態條件下抗臭氧龜裂的測定
| Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
|
| BS ISO 5473-1997
| 橡膠或塑料涂層織物.耐擠壓性測定
| Rubber or plastics-coated fabrics - Determination of crush resistance
|
| BS ISO 6179-1998
| 硫化或熱塑橡膠.橡膠薄板材和橡膠涂層織物.揮發性液體傳輸速度測定(比重測量技術)
| Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
|
| BS ISO 6452-2007
| 橡膠或塑料涂層織物.汽車內裝飾材料霧氣凝結特征的測定
| Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles
|
| BS ISO 7229-1997
| 橡膠或塑料涂層織物.透氣性測量
| Rubber- or plastics-coated fabrics - Measurements of gas permeability
|
| BS ISO 7989-1-2006
| 鋼絲和鋼絲制品.鋼絲的有色金屬涂層.一般原則
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles
|
| BS ISO 7989-2-2007
| 鋼絲和鋼絲制品.鋼絲的有色金屬涂層.鋅或鋅合金涂覆
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc-alloy coating
|
| BS ISO 9211-1-1995
| 光學和光學儀器.光學涂層.定義
| Optics and optical instruments - Optical coatings - Definitions
|
| BS ISO 9211-2-1995
| 光學和光學儀器.光學涂層.光學性能
| Optics and optical instruments - Optical coatings - Optical properties
|
| BS ISO 9211-3-1995
| 光學和光學儀器.光學涂層.環境耐久性
| Optics and optical instruments - Optical coatings - Environmental durability
|
| BS ISO 9211-4-2006
| 光學和光學儀器.光學涂層.特定的試驗方法
| Optics and optical instruments - Optical coatings - Specific test methods
|
| BS L 109-1971
| 鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金鋁涂層薄板和帶材規范(溶液處理和室溫時效)
| Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
|
| BS L 110-1971
| 鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金鋁涂層薄板材和帶材規范(由用戶進行溶液處理)
| Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
|
| BS L 163-1978
| 鋁涂層鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳(0.8)合金薄板材和帶材規范(溶液處理、冷加工壓平和室溫時效)
| Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated , cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS L 164-1978
| 鋁涂層鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳(0.8)合金薄板材和帶材規范(固溶處理和室溫時效的)
| Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS L 165-1978
| 鋁涂層鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳(0.8)合金薄板材和帶材規范(固溶處理和人工時效的)
| Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS L 166-1978
| 鋁涂層鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳(0.8)合金緊公差薄板材和帶材規范(溶液處理和室溫時效)
| Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS M 40-1972
| 用無損試驗法測量涂層厚度的方法
| Methods for measuring coating thickness by non-destructive testing
|
| BS M 58-1986
| 采用硫酸處理工藝的鈦和鈦合金陽極涂層規范
| Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process
|
| DD ENV 1071-1-1994
| 高技術陶瓷.陶瓷涂層的試驗方法.通過接觸探頭輪廓測定儀測定涂層厚度
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe profilometer
|
| DD ENV 1071-2-1994
| 高技術陶瓷.陶瓷涂層試驗方法.用切頭磨削法對涂層厚度的測定
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by the cap grinding method
|
| DD ENV 1071-4-1996
| 高技術陶瓷.陶瓷涂層試驗方法.第4部分:化學成分測定
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of chemical composition
|
| DD ENV 1071-5-1995
| 高技術陶瓷.陶瓷涂層試驗方法.第5部分:孔隙度的測定
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of porosity
|
| DD ENV 927-2-2000
| 涂料和清漆.外部木材用涂層材料和涂層方法.性能規范
| Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification
|
| 編號 | 中文名稱 | 英文名稱 |
|---|