| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 10169-1-1996
| 連續有機涂層(螺旋狀涂層)的扁鋼制品 第1部分：一般信息(定義、材料、公差、試驗方法)
| Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
|
| EN 10169-3-2003
| 連續有機涂層（螺旋狀涂層）扁鋼制品 第3部分：用于建筑物內部的產品
| Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
|
| EN 10245-1-2001
| 鋼絲和鋼絲制品 鋼絲上的有機涂層 第1部分：一般原則
| Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
|
| EN 10245-2-2001
| 鋼絲和鋼絲制品 鋼絲上的有機涂層 第2部分：涂PVC線材
| Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
|
| EN 10245-3-2001
| 鋼絲和鋼絲制品 鋼絲上的有機涂層 第3部分：涂PE線材
| Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
|
| EN 10245-4-2003
| 鋼絲和鋼絲制品 鋼絲上的有機涂層 第4部分：涂聚脂線材
| Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
|
| EN 10301-2003
| 岸上和海上管路鋼管及配件 減小非腐蝕性氣體輸送摩擦力的內涂層
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
|
| EN 1071-1-2003
| 先進技術陶瓷 陶瓷涂層用試驗方法 第1部分：用接觸探針表面光度儀測定涂層厚度
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer
|
| EN 1071-2-2002
| 先進技術陶瓷 陶瓷涂層用試驗方法 第2部分：用滴坑磨碎法測定涂層厚度
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method
|
| EN 1096-1-1998
| 建筑物玻璃 涂層玻璃 第1部分：定義和分類
| Glass in building - Coated glass - Part 1: Definitions and classification
|
| EN 1096-2-2001
| 建筑物玻璃 涂層玻璃 第2部分：A級、B級和S級涂層的要求和試驗方法
| Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
|
| EN 1096-3-2001
| 建筑物玻璃 涂層玻璃 第3部分：C級和D級涂層的要求和試驗方法
| Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
|
| EN 12068-1998
| 陰極保護 與陰極保護有關的埋于地下的或浸于水中的鋼管防腐的外部有機涂層、帶條和冷縮材料
| Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
|
| EN 12508-2000
| 金屬和合金的防腐 表面處理、金屬和其它無機涂層 詞匯
| Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary
|
| EN 13360-2002
| 橡膠或塑料涂層織物 術語
| Rubber- or plastics-coated fabrics - Terminology
|
| EN 13858-2003
| 金屬防銹蝕 鐵或鐵質構件上的非電解鋅粉涂層
| Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
|
| EN 13920-15-2003
| 鋁和鋁合金 廢料 第15部分：消費品鋁包裝產生的去涂層鋁廢料
| Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings
|
| EN 1396-1996
| 鋁和鋁合金 一般用途的盤繞涂層薄板和帶材 規范
| Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
|
| EN 1403-1998
| 金屬腐蝕防護 電鍍涂層 規定一般要求的方法
| Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements
|
| EN 14099-2001
| 航天產品質量保證 用壓敏帶測量涂層和面漆的抗剝落和抗撕裂強度
| Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
|
| EN 14266-2003
| 煤高溫分解的衍生物 煤焦油和瀝青基膠粘劑及相關產品：涂層焦油 特性和試驗方法
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Coating tar - Characteristics and test methods
|
| EN 1875-3-1997
| 橡膠塑料涂層織物 撕裂強度測定 第3部分：梯形法
| Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method
|
| EN 1876-1-1997
| 橡膠或塑料涂層織物 低溫試驗 第1部分：彎曲試驗
| Rubber or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
|
| EN 1876-2-1997
| 橡膠或塑料涂層織物 低溫試驗 第2部分：循環撞擊試驗
| Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop
|
| EN 2437-2001
| 航空航天系列 鋁和鋁合金用鉻酸鹽轉化涂層(黃色)
| Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
|
| EN 2491-1997
| 航空航天系列 二硫化鉬基上的干膜潤滑油 涂層法
| Aerospace series - Molybdenum disulphide dry lubricants - Coating methods
|
| EN 2591-508-2001
| 航空航天系列 光電連接元件 試驗方法 第508部分： 觸點涂層厚度的測量／注與EN 2591－100結合使用
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts / Note: Applies in conjunction with EN 2591-100
|
| EN 2591-509-2001
| 航空航天系列 光電連接元件 試驗方法 第509部分： 觸點涂層的附著力／注 與EN 2591－100結合使用
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts / Note: Applies in conjunction with EN 2591-100
|
| EN 28094-1994
| 鋼絲繩芯輸送機帶 繩芯與涂層間粘合強度試驗
| Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984)
|
| EN 2828-1993
| 航空航天系列 用拋光法作金屬涂層的粘附性試驗
| Aerospace series - Adhesion test for metallic coatings by burnishing
|
| EN 2829-1994
| 航空航天系列 用噴丸加工法作金屬涂層的粘附性試驗
| Aerospace series - Adhesion test for metallic coatings by shot peening
|
| EN 2997-10-1997
| 航空航天系列 連續運行溫度為175℃、200℃、最高溫度為260℃時、耐火或不耐火的用有螺紋環連接的電連接器
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175℃ continuous, 200℃ continuous, 260℃ peak - Part 10: Protective cover for plug - Product standard
|
| EN 2997-9-1997
| 航空航天系列 連續運行溫度為175℃、200℃、最高溫度為260℃時、耐火或不耐火的用有螺紋環連接的電連接器
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175℃ continuous, 200℃ continuous, 260℃ peak - Part 9: Protective cover for receptacle - Product standard
|
| EN 330-1993
| 木材防腐劑 測定涂層下和地面露出接觸用木材防腐劑的相對防護效果的現場試驗方法：L連接法
| Wood preservatives; field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method
|
| EN 4322-2003
| 航空航天系列 TI-P640001陽極氧化 MoS<(Index)2>涂層制鈦合金、帶安全鎖線孔的細柄長螺紋雙六角頭螺栓
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 100 MPa (at ambient temperature) / Note: To be replaced by prEN 4322 (2003-05).
|
| EN 4323-2003
| 航空航天系列 TI-P640001陽極氧化 MoS<(Index)2>涂層制鈦合金 １００°埋頭六角形凹槽全螺紋螺釘 等級
| Aerospace series - Screws, 100?countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350℃ / Note: To be replaced by prEN 4323 (2003-05).
|
| EN 4352-2003
| 航空航天系列 MoS<(Index)2> 涂層制耐熱鎳基合金 NI-PH2601 (Inconel 718)、帶安全鎖線孔的細柄長螺紋雙六
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature)/425℃ / Note: To be rep
|
| EN 582-1993
| 熱噴涂層 抗拉粘附強度的測定
| Thermal spraying; determination of tensile adhesive strength
|
| EN 60684-3-300-2002
| 絕緣軟套管 第3部分：各種型號套管規范 活頁300：無涂層的玻璃纖維編織套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002) / Note: Endorsement notice
|
| EN 60684-3-343 bis 345-2002
| 絕緣軟套管 第3部分：個別型號套管規范 活頁343至345：無涂層膨脹辮形乙烯氯三氟乙烯(E-CTFE)紡織套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002) / Note: Endorsement notice
|
| EN 60684-3-400 bis 402-2002
| 絕緣軟套管 第3部分：各種型號套管規范 活頁400至402：有硅橡膠涂層的玻璃纖維紡織套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002) / Note: Endorsement notice
|
| EN 60684-3-406 bis 408-2003
| 絕緣軟套管 第3部分：各種型號套管規范 活頁406-408：有PVC涂層的玻璃纖維紡`織套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 to 408:2003) / Note: Endorsement notice
|
| EN 60684-3-420 bis 422-2002
| 絕緣軟套管 第3部分：個別型號套管規范 活頁420至422：丙烯酸涂層的聚對笨二甲酸乙二醇脂編織套管
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002) / Note: Endorsement notice
|
| EN 61086-1-1994
| 承載印制電路板用涂料(保護涂層)規范 第1部分：定義、分類和一般要求
| Specification for coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements (IEC 61086-1:1992)
|
| EN 61086-2-1994
| 承載印制電路板用涂料(保護涂層)規范 第2部分：試驗方法
| Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test (IEC 61086-2:1992)
|
| EN 61086-3-1-1995
| 承載印制電路板用涂料(保護涂層) 第3部分：單項材料規范 活頁1: 通用(I類)和高可靠性(II類)涂料
| Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II) (IEC 61086-3-1:1995)
|
| EN 61249-5-1-1996
| 互連結構用材料 第5部分：有和無涂層的導電箔和薄膜分規范集 第1節：銅箔(用于生產覆銅基材)
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995)
|
| EN 61249-5-4-1996
| 互連結構用材料 第5部分：有或無涂層的導電箔和薄膜分規范集 第4節：導電油墨
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks (IEC 61249-5-4:1996)
|
| EN 61249-8-7-1996
| 互連結構用材料 第8部分：非導電薄膜和涂層分規范集 第7節：打印油墨
| Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks (IEC 61249-8-7:1996)
|
| EN 61249-8-8-1997
| 互連結構用材料 第8部分：非導電薄膜和涂層分規范集 第8節：非永久高聚物涂層
| Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings (IEC 61249-8-8:1997)
|
| EN 757-1997
| 焊接消耗品 高強度鋼手工金屬弧焊用涂層焊條 分類
| Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
|
| EN 846-13-2001
| 磚石結構輔助部件試驗方法 第13部分：有機涂層抗沖擊、磨損和侵蝕性的測定
| Methods of test for ancillary components of masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
|
| EN 868-10-2000
| 經消毒的醫療器械用包裝材料和系統 第10部分：生產熱密封袋、卷軸和蓋的聚烯烴粘性涂層非編織材料 要求和
| Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
|
| EN 868-9-2000
| 經消毒的醫療器械用包裝材料和系統 第9部分：生產熱密封袋、卷軸和蓋的聚烯烴非涂層非編織材料 要求和試
| Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
|
| EN 971-1-1996
| 色漆和清漆 涂層材料的術語和定義 第1部分：一般術語
| Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms
|
| EN ISO 105-X10-1995
| 紡織品 色牢度試驗 第X10部分：紡織品顏色向聚氯乙烯涂層遷移的評定
| Textiles - Tests for colour fastness - Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings (ISO 105-X10:1993)
|
| EN ISO 11507-2001
| 色漆和清漆 涂層在設備中人工老化 UV熒光和水的老化
| Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water (ISO 11507:1997)
|
| EN ISO 11644-2003
| 皮革 涂層粘牢度試驗
| Leather - Test for adhesion of finish (ISO 11644:1993)
|
| EN ISO 11998-2001
| 色漆和清漆 涂層的耐濕式洗滌和清洗性測定
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:1998)
|
| EN ISO 15720-2001
| 金屬涂層 孔隙率試驗 膠材料電版術法測定金屬襯底上金和鈀涂層空隙度
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)
|
| EN ISO 15721-2001
| 金屬涂層 孔隙率試驗 用亞硫酸和二氧化硫蒸氣測定金和鈀涂層孔隙率
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
|
| EN ISO 17186-2002
| 皮革 物理性能及機械性能試驗 表面涂層厚度測定
| Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2002)
|
| EN ISO 17233-2002
| 皮革 物理性能及機械性能試驗 表面涂層冷裂溫度的測定
| Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002)
|
| EN ISO 2360-1995
| 非磁性基金屬上非導電涂層 鍍層厚度的測量 渦流法
| Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982)
|
| EN ISO 2411-2000
| 橡膠或塑料涂覆織物 涂層粘合強度的測定
| Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)
|
| EN ISO 4628-1-2003
| 色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第1部分：一般介紹和命名系統
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003)
|
| EN ISO 4628-10-2003
| 色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第10部分：線狀腐蝕度的評定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree filiform corrosion (ISO 4628-10:2003)
|
| EN ISO 4628-2-2003
| 色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第2部分：起泡度的評定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003)
|
| EN ISO 4628-3-2003
| 色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第3部分：防生銹度的評定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003)
|
| EN ISO 4628-4-2003
| 色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第4部分：破裂度的評定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003)
|
| EN ISO 4628-5-2003
| 色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第5部分：剝落度的評定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003)
|
| EN ISO 4628-7-2003
| 色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第7部分：用絨化法做粉化程
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003)
|
| EN ISO 7590-2001
| 鋼絲繩芯輸送帶 總厚度和涂層厚度的測定方法
| Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001)
|
| EN ISO 7623-1997
| 鋼絲繩芯輸送帶 繩芯與涂層之間粘合力試驗 原始試驗和熱處理
| Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996)
|
| EN ISO 8501-1-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分：未涂裝的鋼材和全面清除原有涂層后鋼材
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo
|
| EN ISO 8501-2-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分：局部清除原有涂層后鋼材的銹蝕等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994) |
| EN ISO 8980-4-2000
| 眼科光學 未切邊成品眼鏡片 第4部分：防反射涂層的試驗方法和規范
| Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000)
|
| ENV 10169-2-1999
| 連續有機涂層（螺旋狀涂層）扁鋼制品 第2部分：用于建筑物外部的產品
| Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
|
| ENV 1071-3-1994
| 先進技術陶瓷 陶瓷涂層用試驗方法 第3部分：用刮痕試驗測定膠合力
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion by a scratch test
|
| ENV 1071-4-1995
| 先進技術陶瓷 陶瓷涂層試驗方法 第4部分：化學成分的測定
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition
|
| ENV 1071-5-1995
| 先進技術陶瓷 陶瓷涂層用試驗方法 第5部分：多孔性的測定
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 5: Determination of porosity
|
| ENV 1071-6-2002
| 先進技術陶瓷 陶瓷涂層用試驗方法 第6部分：微小磨損試驗測定涂層抗磨損性
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
|
| prEN 10300-2002
| 岸上和海上管路鋼管及配件 外表涂層用瀝青加熱材料
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
|
| prEN 10309-1999
| 岸上和海上管路鋼管及配件 外表環氧樹脂粉末涂層
| Steel tubes and fittings for onshore and offshore pipelines - External epoxy powder coating
|
| prEN 10310-2002
| 岸上和海上管路鋼管及配件 雙層環氧樹脂和聚酰胺基涂層的內襯和外襯
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
|
| prEN 10329-2002
| 岸上和海上管路鋼管及配件 外表安裝接頭涂層
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
|
| prEN 1071-3-2000
| 先進技術陶瓷 陶瓷涂層用試驗方法 第3部分：用刮痕試驗測定膠合力和其它機械故障
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test
|
| prEN 1096-4-2001
| 建筑物玻璃 涂層玻璃 第4部分：一致性評定
| Glass in building - Coated glass - Part 4: Evaluation of conformity
|
| prEN 12206-1-2001
| 色漆和清漆 建筑用途的鋁和鋁合金涂層 第1部分：由粉末涂料的配制涂層
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from powder coating materials
|
| prEN 12757-1-1997
| 涂層材料的攪拌機械 安全要求 第1部分：整修車輛表面用涂料的攪拌機械
| Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
|
| prEN 13333-1998
| 皮革 物理和機械試驗 表面涂層冷裂溫度的測定
| Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
|
| prEN 13438-2002
| 建筑用電鍍鋼產品的粉狀有機涂層
| Powder organic coatings for galvanized steel products for construction purposes
|
| prEN 13938-6-2001
| 民用爆破器材 推進劑和火箭推進劑 第6部分：火箭用固體燃料推進劑 抑制劑涂層完整性的測定指南
| Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants; Guide for the determination of integrity of inhibitor coatings
|
| prEN 1958-1995
| 用于珠寶和有關產品的貴重金屬及其合金的裝飾涂層
| Precious metal and precious metal alloy decorative coatings used in jewellery and associated products
|
| prEN 31950-1993
| 冷軋鍍鉻//氧化鉻涂層鋼板
| Cold-reducted electrolytic chromium/chromium oxide coated steel (ISO/DIS 11950)
|
| prEN 4071-1999
| 航空航天系列 鋁 IVD涂層鈦合金標準六角頭緊公差普通柄短螺紋螺栓 等級：1100 MPa(環境溫度) /425℃
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4072-1999
| 航空航天系列 鋁 IVD涂層鈦合金、100°埋頭標準頭偏十字凹槽緊公差普通柄短螺紋螺釘 等級：1100 MPa(環境
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4127-1999
| 航空航天系列 鈦合金鋁 IVD涂層、標準六角頭松公差普通柄短螺紋螺栓 等級：1100 MPa (環境溫度)/425 ℃
| Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4128-1999
| 航空航天系列 耐熱鎳基合金鋁 IVD涂層、標準六角邊頭松公差普通柄短螺紋螺栓 等級：1250 MPa (環境溫度)/
| Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425℃
|
| prEN 4176-1999
| 航空航天系列 陽極氧化或有鋁色涂層鈦合金TI-P64001、100°埋頭標準頭或突出頭的張力剪式緊公差鎖緊螺栓、
| Aerospace series - Lockbolts, 100?countersunk normal head or protruding head, tension-sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric
|
| prEN 4312-1999
| 航空航天系列 帶鋁色涂層制 耐熱和耐腐蝕鋼、松公差異徑柄中等長度螺紋的雙頭螺栓 等級：1100 MPa (常溫
| Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4363-1999
| 航空航天系列 帶鋁色涂層鈦合金 Ti 44,5 Cb、制１００°埋頭短頭實心鉚釘 米制
| Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series
|
| prEN 4401-1999
| 航空航天系列 米制有鋁色涂層鈦合金TI-P64001緊公差剪式突頭鎖緊螺栓 等級：1100 MPa (常溫)/315℃
| Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4402-1999
| 航空航天系列 米制有鋁色涂層鈦合金TI-P64001緊公差剪式100度埋頭標準頭鎖緊螺栓 等級：1100 MPa (常溫)/
| Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4403-1999
| 航空航天系列 有鋁色涂層鈦合金Ti44, 5 Cb100度埋頭標準頭實心鉚釘 米制
| Aerospace series - Rivets, solid, 100?countersunk normal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series
|
| prEN 4404-1999
| 航空航天系列 有鋁色涂層鈦合金Ti44, 5 Cb通用頭實心鉚釘 米制
| Aerospace series - Rivets, solid, universal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series
|
| prEN 4407-1997
| 航空航天系列 有IVD鋁涂層的鈦合金全螺紋頭標準六角螺栓 等級：1100 MPa(常溫)/315度
| Aerospace series - Bolts, normal hexagonal head, threaded to head, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4473-1999
| 航空航天系列 鋁涂層 技術規范
| Aerospace series - Aluminium pigmented coatings - Technical specification
|
| prEN 4474-1999
| 航空航天系列 鋁涂層 涂覆方法
| Aerospace series - Aluminium pigmented coatings - Coating methods
|
| prEN 4495-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋 標準六角頭螺栓 等級：1100 MPa (環境溫度下)/31
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4496-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字形埋頭100度 標準頭螺釘 等級：1100 MPa (環
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4497-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字口錐形頭螺釘 等級：1100 MPa (環境溫度下)/31
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4498-1999
| 航空航天系列 鋁涂層鈍化耐熱鎳基合金緊公差標準體中長螺紋大雙頭六角頭螺栓 等級：1550 MPa (環境溫度下
| Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1550 MPa (at ambient temperature)/315℃
|
| prEN 4499-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字口矮頭埋頭100度螺釘 等級：1100 MPa (環境溫
| Aerospace series - Screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4501-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋帶肩薄六角頭螺栓 等級：1100 MPa (環境溫度下)/31
| Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4509-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金全螺紋十字口埋頭100度 標準螺釘 等級：1100 MPa (環境溫度下)/315℃
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4603-1999
| 航空航天系列 緊固件的二硫化鉬涂層 技術規范
| Aerospace series - Molybdenum disulphide coatings of fasteners - Technical specification
|
| prEN 61086-1-2002
| 承載印制電路板用涂料(敷形涂層) 第1部分：定義、分類和一般要求
| IEC 61086-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements
|
| prEN 61086-2-2002
| 承載印制電路板用涂料(保護涂層) 第2部分：試驗方法
| IEC 61086-2, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
|
| prEN 61086-3-1-2002
| 承載印制電路板用涂料(保護涂層) 第3部分：單項材料規范 第1節：通用(I類)、高可靠性(II類)和航空涂料
| IEC 61086-3-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials; Section 1: Coatings for general purpose (class 1), high reliability (class 2) and for aerospace (class 3)
|
| prEN 971-2-1996
| 色漆和清漆 涂層材料的術語和定義 第2部分：與油漆特性和性能有關的特定術語
| Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties
|
| prEN 971-3-1996
| 色漆和清漆 涂層材料的術語和定義 第3部分：表面準備和應用方法
| Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and application methods
|
| prEN ISO 14924-2002
| 熱噴涂 熱噴涂層的后處理及終飾
| Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO/DIS 14924:2002)
|
| prEN ISO 2360-2003
| 非磁性基金屬上非導電涂層 鍍層厚度的測量 振幅靈敏的渦流法
| Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO/FDIS 2360:2003) / Note: Intended as replacement for EN ISO 2360 (1995-01).
|
| 編號 | 中文名稱 | 英文名稱 |
|---|