| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 15551-3-1985 | 輻射敏感膠卷.硝酸纖維膠卷.術語、特性、用途、貯存 | Radiation sensitive films; cellulose nitrate film; terminology, properties, utilization, storage |
| DIN 16734-1986 | 與瀝青不相容的人造纖維增強的增塑聚氯乙烯(PVC-P)屋面氈.要求 | Man-made fibre reinforced plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements |
| DIN 16737-1986 | 聚氯乙烯(PE-C)制的屋面氈和帶編織纖維內襯層的防水薄板材.要求 | Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet with woven fabric inner layer; requirements |
| DIN 16740-1976 | 玻璃纖維織物.電氣用玻璃纖維織物.交貨技術條件 | Textile glass; textile glass fabrics for electrical purposes, technical delivery specifications |
| DIN 16741-1976 | 玻璃纖維織物.電氣用帶邊的玻璃纖維織物帶.交貨技術條件 | Textile glass; tapes with edges consisting of textile glass fabrics for electrical purposes, technical delivery specifications |
| DIN 16867-1982 | 化工管路用玻璃纖維增強式聚酯樹脂管道、配件和接頭.交貨技術條件 | Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions |
| DIN 16868-1-1994 | 玻璃纖維增強式不飽和聚酯樹脂(UP-GF)管材.第1部分:纏繞式和填充式.尺寸 | Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Wound, filled; dimensions |
| DIN 16868-2-1994 | 玻璃纖維增強式不飽和聚酯樹脂(UP-GF)管材.第2部分:纏繞式和填充式.一般質量要求、檢驗 | Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled; General quality requirements, testing |
| DIN 16869-1-1995 | 離心澆注玻璃纖維增強聚脂樹脂管(VP-GF).第1部分:尺寸 | Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions |
| DIN 16869-2-1995 | 離心澆注玻璃纖維增強聚脂樹脂管(VP-GF).第2部分:一般質量要求、檢驗 | Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing |
| DIN 16870-1-1987 | 紡織玻璃纖維增強環氧樹脂管.尺寸 | Wound glass fibre reinforced epoxy resin pipes; dimensions |
| DIN 16871-1982 | 離心鑄塑玻璃纖維增強環氧樹脂管.尺寸 | Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions |
| DIN 16872-1993 | 熱塑性塑料管道用管接頭組件.玻璃纖維增強的聚酯樹脂(UP-GE)法蘭.尺寸 | Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions |
| DIN 16944-1988 | 玻璃纖維增強的反應型樹脂模塑材料.試驗方法 | Glass fibre reinforced reaction resin moulding materials; test methods |
| DIN 16964-1988 | 繞制玻璃纖維增強聚酯樹脂管.一般質量要求和試驗 | Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing |
| DIN 16965-1-1982 | 繞制玻璃纖維增強聚酯樹脂管(UP-GF).A型管.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A pipes, dimensions |
| DIN 16965-2-1982 | 繞制玻璃纖維增強聚脂樹酯管.B型管.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type B pipes, dimensions |
| DIN 16965-4-1982 | 紡織玻璃纖維增強聚脂樹酯管.管、D管型.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type D pipes, dimensions |
| DIN 16965-5-1982 | 紡織玻璃纖維增強聚脂樹酯管.管、E管型.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E pipes, dimensions |
| DIN 16966-1-1988 | 玻璃纖維增強聚酯樹脂(UP-GF)異型件和連接件.第1部分:一般質量要求和檢驗 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing |
| DIN 16966-2-1982 | 玻璃纖維增強式聚酯樹脂管道配件和接頭.彎管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions |
| DIN 16966-4-1982 | 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.三通噴管嘴尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions |
| DIN 16966-5-1982 | 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.縮徑管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions |
| DIN 16966-6-1982 | 玻璃纖維增強聚酯樹管(UP-GF)管件和接頭組件.卡圈、法蘭、密封圈、尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions |
| DIN 16966-7-1995 | 玻璃纖維增強聚酯樹脂管道連接件及其組件.第7部分:套筒、法蘭、法蘭連接和對接件.一般質量要求和試驗方法 | Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods |
| DIN 16966-8-1982 | 玻璃纖維增強聚酯管(UP-GF)管件和接頭.層壓塑料接頭.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions |
| DIN 16967-2-1982 | 玻璃纖維增強環氧樹脂(EP-GF)管件和接頭.彎管、三通管、尺寸 | Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions |
| DIN 18089-1-1984 | 防火隔板.防火門填料.礦物纖維板（氈）.定義、名稱、要求、檢驗 | Fire barriers; fillers for fire-doors; mineral fibre boards (felts); definition, designation, requirements, tests |
| DIN 18191-1980 | 作瀝青路襯底的機織玻璃纖維織物 | Woven glass fabric as inlay bituminous sheeting |
| DIN 18192-1985 | 作瀝青和聚合物瀝青薄板鑲嵌物的粘合聚酯纖維氈.概念、標志、要求和試驗 | Bonded polyester fleece used as an inlay for bitumen and polymer bitumen sheeting; concept, designation, requirements, testing |
| DIN 18204-1-2007 | 用紡織物和塑料薄膜(篷帳布)制造的建筑物和帳篷罩部件.第1部分:涂聚氯乙烯(PVC)的聚酯基底纖維 | Components for enclosures made of textile fabrics and plastic films (awnings) for structures and tents - Part 1: PVC coated polyester base fabric |
| DIN 18820-1-1991 | 承載構件用玻璃纖維增強非飽和聚酯樹脂和苯甲酰甲基樹脂制層壓塑料(GF-UP、GF-PHA).第1部分:結構、制造和特 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); structure, manufacture and characteristics |
| DIN 18820-2-1991 | 承載構件用玻璃纖維增強式非飽和聚酯和苯酚樹脂制層壓塑料(GF-UP.GF-PHA).第2部分:標準層壓塑料的物理參數 | Laminates of textile glass-reinforced unsaturared polyester and phenolic resins for load-bearing structural members (GF-UP, GF-PHA); physical parameters for standard laminates |
| DIN 18820-3-1991 | 承載構件用玻璃纖維增強非飽和聚酯樹脂和苯甲酰甲基樹脂制層壓塑料(GF-UP、GF-PHA).第3部分:承載層壓塑料的 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); protective measures for load-bearing laminates |
| DIN 18820-4-1991 | 承載構件用玻璃纖維增強非飽和聚脂樹酯和苯甲酰甲基樹脂制層壓塑料(GF-UP、GF-PHA).第4部分:試驗和質量控制 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); tests and quality control |
| DIN 19850-1-1996 | 污水管道用纖維水泥管和配件件.第1部分:管,支管和彎頭尺寸 | Fibre cement pipes and fittings for sewers - Part 1: Dimensions of pipes, branches and bends |
| DIN 19850-2-1996 | 纖維水泥污水管和接頭.第2部分:接頭尺寸 | Fibre cement pipes and fittings for sewers - Part 2: Dimensions of joints |
| DIN 2103-1993 | 辦公室機器.油墨帶.紡織纖維油墨帶 | Office machines; inked ribbons; woven fabric ribbons |
| DIN 28018-2006 | 玻璃纖維襯鋼的壓力容器.設備用0.063-10立方米的生產設備用容器 | Pressure vessels, glass lined steel - Vessels for production plants 0,063 m<(hoch)3> up to 10 m<(hoch)3> |
| DIN 28019-2006 | 玻璃纖維襯鋼的壓力容器.12.5-125立方米的儲存用容器 | Pressure vessels, glass lined steel - Vessels for storage 12,5 m<(hoch)3> up to 125 m<(hoch)3> |
| DIN 28091-2-1995 | 密封板的交貨技術條件.第2部分:纖維基密封材料.要求和試驗 | Technical delivery conditions for gasket sheets - Part 2: Fibre-based gasket materials (FA); requirements and testing |
| DIN 28136-11-1989 | 攪拌器.第11部分:玻璃纖維襯里的 CE 型公稱容量為 4000 升更換用剛制攪拌器頂蓋噴嘴的位置和尺寸 | Agitator vessels; position and sizes of cover nozzles for glass lined steel agitator vessels, type CE, with a nominal volume of 4000 litres for replacement purposes |
| DIN 28145-6-1979 | 玻璃纖維襯里攪拌容器用焊接件.第6部分:支架 | Parts welded to glass lined agitator vessels; bracket |
| DIN 29505-1987 | 航空航天.纖維增強的塑料構件.圖紙和零件清單的說明 | Aerospace; components of fibre reinforced plastics; indications in drawings and parts lists |
| DIN 29965-1992 | 航空航天.碳纖維.碳纖維素長絲紗.技術規范 | Aerospace; carbon fibres; carbon fibre filament yarns; technical specification |
| DIN 29971-1991 | 航空航天.不定向碳纖維環氧樹脂薄板和預浸漬帶.技術規范 | Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification |
| DIN 3068-1972 | 鋼絲繩.6×24標準加7纖維芯的圓形絞股鋼絲繩 | Steel wire ropes; round strand rope 6 × 24 Standard + 7 fibre cores |
| DIN 3535-5-1993 | 煤氣供氣密封件:煤氣管件和煤氣設備用橡膠、軟木和合成纖維制密封材料.安全性試驗要求 | Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests |
| DIN 3535-6-1999 | 供氣用密封墊.第6部分:氣閥、煤氣設備和煤氣主管道用基于合成纖維、石墨或聚四氟乙烯的密封墊材料 | Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains |
| DIN 40604-1-1965 | 硬化纖維.第1部分:板材、薄板材、條材、帶材 | Vulcanized Fibre; Panels (Sheets), Sheeting, Strips, Tapes |
| DIN 40604-2-1967 | 硬化纖維.第1部分:管材和棒材 | Vulcanized fibre; tubes and rods |
| DIN 40763-1-1988 | 鎳鎘蓄電池.帶纖維結構板的電池.塑料容器電池.標稱容量、主要尺寸 | Nickel-cadmium-batteries; cells with fibre structured plates; cells in plastic containers; nominal capacities, main dimensions |
| DIN 40763-2-1990 | 鎳鎘蓄電池.帶纖維結構板的電池.塑料容器電池.放電電流、最終放電電壓、放電時間 | Nickel-cadmium batteries; cells with fibre structured plates; cells in plastic containers; discharge current, final discharge voltages, discharge time |
| DIN 4102-17-1990 | 建筑材料和構件的防火性能.第17部分:礦物纖維絕緣材料熔點的測定.概念、要求和檢驗 | Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing |
| DIN 4195-1976 | 篩底.絲或化學纖維紡織布.尺寸 | Screening surfaces; woven filament cloth of silk or man-made fibers, dimensions |
| DIN 52141-1980 | 用做屋頂和防水板防護層的玻璃纖維毛狀襯料.定義、名稱、要求 | Glass fibre fleece as layer for roof and water-proof sheeting; definition, designation, requirements |
| DIN 52142-1978 | 卷鋪屋面料和防水屋面料的載體材料玻璃纖維網.試驗程序 | Glass fibre mat as carrier material for roll roofing and waterproofing; test procedures |
| DIN 52187-1979 | 木材的檢驗.順纖維方向的極限剪切強度的測定 | Testing of wood; determination of ultimate shearing stress parallel to grain |
| DIN 52271-1981 | 礦物纖維絕緣材料的檢驗.高溫性能 | Testing of mineral fibre insulating materials; Behaviour at elevated temperatures |
| DIN 52274-1986 | 礦物纖維絕緣材料檢驗.斷裂強度.垂直于絕緣層面的層間抗拉強度測定 | Testing of mineral fibre insulating materials; determination of interlaminar tensile strength perpendicular to plane of insulating layer |
| DIN 52275-2-1978 | 礦物纖維絕緣材料的檢驗.測定直線尺寸和體密度.管殼 | Testing of mineral fibrous insulating materials; determination of linear dimensions and bulk density, casings |
| DIN 52316-1970 | 玻璃的檢驗.連續玻璃纖維長絲粗紗的剛性測定 | Testing of glass; determination of stiffness of continuous filament glass fibre rovings |
| DIN 53133-2006 | 紙板的試驗.測定膠粘合波紋纖維板的耐水性 | Testing of board - Determination of water resistance of glue bond of corrugated fibreboard |
| DIN 53178-1969 | 色漆、清漆和類似涂料的檢驗.噴漆中硝化纖維含量的測定 | Testing of paints, varnishes and similar products; determination of nitro cellulose content of lacquers |
| DIN 53390-1988 | 玻璃纖維增強塑料的檢驗.單向玻璃纖維增強層壓塑料圓棒的彎曲試驗 | Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars |
| DIN 53393-1976 | 玻璃纖維增強塑料的檢驗.受化學制品作用的性能 | Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals |
| DIN 53766-1-1991 | 玻璃纖維增強塑料器具和容器的檢驗.粘合強度的測定 | Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength |
| DIN 53769-1-1988 | 玻璃纖維增強塑料管道檢驗.第1部分:B型管道配件縱向剪切強度的測定 | Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings |
| DIN 53769-2-1986 | 玻璃纖維增加塑料管道檢驗.長期靜液壓試驗 | Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test |
| DIN 53769-3-1988 | 玻璃纖維增強塑料管試驗.管子短時間和長時間最大壓力試驗 | Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness |
| DIN 53769-6-1989 | 玻璃纖維增強塑料管道檢驗.第6部分:受內壓脈動作用的管道和配件 | Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure |
| DIN 53805-1980 | 紡織品的試驗.短纖維長度的測定.術語和一般原則 | Testing of textiles; determination of the length of staple fibres; terminology and general principles |
| DIN 53806-1970 | 紡織品的試驗.根據精梳纖維長度測量方法測定棉纖維長度 | Testing of textiles; determination of fibre length of cotton according to the comb staple method |
| DIN 53808-1-2003 | 紡織品的檢驗.用單纖維測量法測定纖維長度 | Testing of textiles - Determination of length of fibres by measuring of individual fibres |
| DIN 53811-1970 | 紡織品的試驗.從顯微投影的縱視圖中測定纖維的直徑 | Testing of textiles; determination of the diameter of fibres from longitudinal view by microscope projection |
| DIN 53814-1974 | 紡織品的檢驗.纖維和紗段吸濕能力的測定 | Testing of textiles; determination of water retention power of fibres and yarn cuttings |
| DIN 53830-4-1981 | 紡織品的檢驗 .單根紗線和合股線的線密度的測定.彈性紗線.包括由彈性纖維紡成的包芯紗線.用分段法 | Testing of textiles; determination of linear density of single and plied yarns; elasto-yarns including core spun yarns from elastofibres; short length method |
| DIN 53843-2-1988 | 紡織品的檢驗.第2部分:紡織纖維的環狀拉力試驗 | Testing of textiles; loop tensile test for staple fibres |
| DIN 53865-1998 | 紡織品試驗.纖維轉移傾向的測定.轉筒縮絨法 | Testing of textiles - Determination of fibre migration tendency - Tumble-method |
| DIN 53941-1983 | 紡織品的檢驗.棉纖維馬克隆尼值(Micronaire-Wert)的測定 | Testing of textiles; determination of micronaire value of cotton fibres |
| DIN 53943-1-1986 | 紡織品檢驗.棉纖維的成熟期.第1部分:概念 | Testing of textiles; cotton fibre maturity; concepts |
| DIN 53943-2-1978 | 紡織品的檢驗.第2部分:通過苛性鈉溶液的膨脹處理并采用顯觀法對棉纖維的成熟度的測定 | Testing of textiles; state of maturity of cotton fibres, microscopic method, swelling in caustic soda solution |
| DIN 53943-3-1983 | 紡織品的試驗.棉纖維的成熟情況.百分比成熟度的測定.用偏光顯微鏡的顯微鏡檢驗法 | Testing of textiles; cotton fibre maturity; determination of the percent maturity; microscopic method using a polarisation microscope |
| DIN 53944-1993 | 紡織品的試驗.棉纖維計量長度和均勻度的測定 | Testing of textiles; determination of gauge length and eveness of cotton |
| DIN 54200-1974 | 紡織品的檢驗.用溶解法測定纖維混紡成分的定量測定.原理及應用范圍 | Testing of textiles; quantitative analysis of fibre mixtures by means of solvent method, basis and field of application |
| DIN 54201-1975 | 紡織品的檢驗.纖維混紡織物的定量分析,一般操作方法 | Testing of textiles; quantitative analysis of fibre mixtures, directions for the work |
| DIN 54204-1975 | 紡織品的檢驗.羊毛和其它纖維二元混合織物的定量分析.氫氧化鉀溶液法 | Testing of textiles; quantitative analysis of binary mixtures, wool with other fibres, potassium hydroxide solution method |
| DIN 54205-1975 | 紡織品試驗.二元混合物成份的定量分析.天然或再生纖維素纖維與聚酯纖維.硫酸法 | Testing of textiles; quantitative analysis of binary mixtures, natural or regenerated cellulose fibres with polyester fibres, sulphuric acid method |
| DIN 54206-1975 | 紡織品試驗.二元混合物成份的定量分析.蛋白質纖維與其它纖維.次氯酸鹽法 | Testing of textiles; quantitative analysis of binary mixtures, protein fibres with other fibres, hypochlorite method |
| DIN 54208-2001 | 紡織品的試驗.二元混合物的定量分析.含有其它纖維特別是棉花的再生纖維素纖維.甲酸/氯化鋅法 | Testing of textiles - Quantitative analysis of binary mixtures - Regenerated cellulose fibres with other fibres, especially cotton; Formic acid/zinc chloride method |
| DIN 54210-1975 | 紡織品的檢驗..醋酯纖維素纖維與其它纖維二元混合織物的定量分析.丙酮法 | Testing of textiles; quantitative analysis of binary mixtures, acetate fibres with other fibres, acetone method |
| DIN 54211-1975 | 紡織品的檢驗.三醋酸短纖維與其它纖維二元混合織物的定量分析.二氯甲烷法 | Testing of textiles; quantitative analysis of binary mixtures, triacetate fibres with other fibres, dichlormethane (methylene chloride) method |
| DIN 54212-1975 | 紡織品的檢驗.酪蛋白纖維與其它纖維二元混合織物進行定量分析.胰蛋白酶法 | Testing of textiles; quantitative analysis of binary mixtures, casein fibres with other fibres, trypsin method |
| DIN 54215-1977 | 紡織品的檢驗.聚丙烯纖維與其它纖維二元混合物定量分析.混合二甲苯法 | Testing of textiles; quantitative analysis of binary mixtures, polypropylene fibres with other fibres, xylol method |
| DIN 54216-1975 | 紡織品的檢驗.聚氯乙烯纖維與其它纖維二元混合織物的定量分析.二硫化碳/丙酮法 | Testing of textiles; quantitative analysis of binary mixtures, polyvinyl chloride fibres with other fibres, carbon disulphide/acetone method |
| DIN 54217-1975 | 紡織品的檢驗.丙烯酸纖維、改良丙烯酸纖維及某些聚氯乙烯纖維與其它纖維二元混合織物的定量分析.二甲基甲酰 | Testing of textiles; quantitative analysis of binary mixtures, acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres, dimethyl formamide method |
| DIN 54218-1975 | 紡織品的檢驗.醋酸纖維與聚氯乙烯纖維二元混合物的定量分析.醋酸法 | Testing of textiles; quantitative analysis of binary mixtures, acetate fibres with polyvinyl chloride fibres, acetic acid method |
| DIN 54220-1975 | 紡織品的檢驗.聚酰胺66纖維或聚酰胺6纖維與其它纖維二元混合織物的定量分析.甲酸法 | Testing of textiles; quantitative analysis of binary mixtures, polyamide 6 6 or polyamide 6 fibres with other fibres, formic acid method |
| DIN 54221-1975 | 紡織品的檢驗.聚酰胺66纖維或聚酰胺6纖維與其它纖維二元混合織物的定量分析.鹽酸法 | Testing of textiles; quantitative analysis of binary mixtures, polyamide 6 6 or polyamide 6 fibres with other fibres, hydrochloric acid method |
| DIN 54270-1-1976 | 紡織品的檢驗.第1部分:纖維素極限粘度測定原則 | Testing of textiles; determination of the limit-viscosity of celluloses, principles |
| DIN 54270-2-1977 | 紡織品的檢驗.用氫氧化銅乙二氨溶液法測定纖維素的極限粘度 | Testing of textiles; determination of the limit-viscosity of celluloses, Cuen-procedure |
| DIN 54270-3-1977 | 紡織品的檢驗.第3部分:纖維素極限粘度的測定.EWNN<(指數)mod(NaCl)>程序 | Testing of textiles; determination of the limit-viscosity of celluloses, EWNN<(Index)mod(NaCl)>-procedure |
| DIN 54270-4-1977 | 紡織品的檢驗.用硝酸鹽法測定纖維素的極限粘度 | Testing of textiles; determination of the limit-viscosity of celluloses, nitrate procedure |
| DIN 54274-1983 | 紡織品試驗.對聚酰胺纖維中氨端基進行定量測 | Testing of textiles; quantitative analysis of amino end groups in polyamide fibres |
| DIN 54275-1977 | 紡織品的檢驗.用外推法測定纖維材料的pH值 | Testing of textiles; determination of the pH value of fibre materials, method of extrapolation |
| DIN 54282-1971 | 紡織品的檢驗.醋酸纖維或三醋酸纖維中醋酸含量的測定 | Testing of textiles; determination of content of acetic acid of acetate or triacetate fibres |
| DIN 54288-1977 | 紡織品試驗.粘膠纖維中硫的定量測定 | Testing of textiles; quantitative determination of sulfur in viscose fibres |
| DIN 54500-2004 | 紙的檢驗.與密度相關的纖維及紙的光散射和吸光系數的測定 | Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials |
| DIN 54813-1994 | 塑料檢驗.紡織玻璃纖維增強的聚酯樹脂塑料的連接試驗.用彎曲剪切試驗測定斷裂負荷 | Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test |
| DIN 55428-1-1998 | 包裝材料.硬質纖維板.第1部分:要求和試驗 | Packaging materials - Solid fibreboard - Part 1: Requirements, testing |
| DIN 55428-2-1998 | 包裝材料.硬質纖維板.第2部分:濕強度.要求和試驗 | Packaging materials - Solid fibreboard - Part 2: Wet strength; requirements, testing |
| DIN 55429-2-1987 | 包裝.紙板、硬纖維板或波紋板制箱子.尺寸、極限偏差、尺寸檢驗 | Packaging; boxes manufactured from board, solid fibre-board or corrugated board; dimensions, limit deviations, testing of dimensions |
| DIN 55483-1-1984 | 包裝用橡膠纖維和/或動物纖維.第1部分:要求、檢驗 | Rubberized fibre and/or hair for packaging; requirements, testing |
| DIN 55511-1-1984 | 包裝方法.可調整到600mm×400mm、用硬纖維板和波紋板制成的包裝箱.帶底和折板頂蓋的可折疊箱 | Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); folding boxes with bottom and top flaps |
| DIN 55511-3-1984 | 包裝方法.可調整到600mm×400mm、用硬纖維板和波紋板制成的包裝箱.伸縮式包裝箱 | Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); telescope boxes |
| DIN 55952-1981 | 油漆和清漆的粘合劑.纖維素醚.試驗 | Binders for paints and varnishes; cellulose ethers; testing |
| DIN 55953-1981 | 油漆和清漆.有機酸纖維素酯.試驗 | Binders for paints and varnishes; cellulose esters of organic acids; testing |
| DIN 57441-2-1982 | 標稱電壓>1KV系統用有機材料絕緣子試驗.帶玻璃纖維芯子的戶外鏈?zhǔn)浇^緣子的試驗(VDE規范) | Tests on insulators of organic material for systems with nominal voltages greater than 1 kV; tests on outdoor composite insulators with fibre glass core [VDE Guide] |
| DIN 58140-1-1986 | 纖維光學.術語和符號 | Fibre optics; terms and symbols |
| DIN 58140-2-1986 | 纖維光學.纖維光學元件的分類 | Fibre optics; classification of fibre optic elements |
| DIN 58141-4-1990 | 光學纖維元件的檢驗.光導纖維的直徑和厚度的測定 | Testing of fibre optic elements; determination of diameters and thicknesses of optical fibres |
| DIN 58141-5-1993 | 光纖元件的檢驗.光導體和圖象導體纖維折斷率的測定 | Testing of fibre optic elements; determination of the rate of broken fibres of light and image conductors |
| DIN 58141-7-1990 | 光學纖維元件的檢驗.纖維光纜抗拉載荷的測定 | Testing of fibre optic elements; determination of tensile load of fibre optic cables |
| DIN 58141-9-1995 | 纖維光學元件的檢驗.第9部分:光學纖維的圓度和同心度偏差的測定 | Testing of fibre optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres |
| DIN 58906-1-2000 | 止血學.纖維蛋白原濃度測定.第1部分:按測定條款中規定的可凝固的纖維蛋白原的參考測量方法 | Haemostaseology - Determination of fibrinogen concentration - Part 1: Reference measurement procedure for the determination of clottable fibrinogen as described by Clauss |
| DIN 60001-1-2001 | 紡織纖維.第1部分:天然纖維和字母代碼 | Textile fibres - Part 1: Natural fibres and letter codes |
| DIN 60001-2-1990 | 紡織纖維.第2部分:纖維形狀和生產方式 | Textile fibres; forms of fibres and manufacturing |
| DIN 60005-2006 | 紡織吊索.安全.人造纖維一次性單層機織吊索 | Textile slings - Safety - Disposable flat woven slings, made of man-made fibres |
| DIN 60011-1958 | 亞麻纖維 .加工階段 | flax fibre; processing phases |
| DIN 60021-1975 | 纖維初加工產品和前紡工程產品.術語和定義 | Products of fibre preparing and preparatory spinning, terms and definitions |
| DIN 60105-1983 | 用韌皮纖維紡織法紡制的紗線 | Yarns produced on bast fibre spinning systems |
| DIN 60150-1984 | 硬纖維紗線 | Hard fibre yarns |
| DIN 60910-1985 | 紡織纖維和紗線的線性密度.得可薩斯（Tex)體系的換算表 | Linear densities of textile fibres and yarns; conversion tables for the Tex system |
| DIN 6141-2000 | 包裝材料.纖維板帶蓋桶.鋼制的底和蓋 | Packaging - Fibreboard drums - Bottom and lid made of steel |
| DIN 61850-1976 | 紡織玻璃纖維產品和輔助產品.術語和定義 | Textile glass products and auxiliary products; terms and definitions |
| DIN 61853-1-1987 | 紡織玻璃纖維.增強塑料用的玻璃纖維氈片.交貨技術條件 | Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions |
| DIN 61853-2-1987 | 紡織玻璃纖維.增強塑料用的玻璃纖維氈片.分類和用途 | Textile glass; textile glass mats for plastics reinforcement; classification and application |
| DIN 61854-1-1987 | 玻璃纖維織物.塑料增強用的紡織玻璃纖維織物.紡織玻璃長絲織物和紡織粗紗.交貨技術條件 | Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; technical delivery conditions |
| DIN 61854-2-1987 | 玻璃纖維織物.塑料增強用的紡織玻璃纖維織物.紡織玻璃長絲織物和紡織粗紗.類型 | Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types |
| DIN 64165-1977 | 紡織纖維預梳用的粗梳機.術語、定義和結構原理 | Carding willow for fibre-preparing; terms and definitions, principles of construction |
| DIN 65060-1991 | 航空航天.玻璃纖維織物.增強塑料材料用玻璃纖維絲粗紗.技術規范 | Aerospace; textile glass; textile glass filament rovings for reinforcement of plastics; technical specification |
| DIN 65065-1979 | 航空航天.纖維增強樹脂.技術規范 | Aerospace; resins for fiber reinforced, technical specification |
| DIN 65066-1991 | 航空航天.紡織玻璃纖維.玻璃長絲紗織物.技術規范 | Aerospace; textile glass; woven glass filament fabric; technical specification |
| DIN 65067-1-1980 | 航空航天.具有纖維增強塑料覆蓋層(FK)的夾層結構.技術規范 | Aerospace; sandwich structures with top layers of fibre reinforced plastics, technical specification |
| DIN 65071-1-1992 | 航空和航天.纖維增強模塑材料.單向纏繞的紗和粗紗試驗板的制備 | Aerospace; fibre reinforced moulding materials; preparation of test panels of unidirectional wound yarns and rovings |
| DIN 65071-2-1992 | 航空航天.纖維增強模塑材料.平面增強織物試驗板的制備 | Aerospace; fibre reinforced moulding materials; preparation of test panels of plain reinforcing fibre products |
| DIN 65071-3-1993 | 航空和航天.纖維增強模塑材料.蜂窩狀預浸漬夾層試驗板的制備 | Aerospace; fibre reinforced moulding materials; preparation of honeycomb/prepreg sandwich test panels |
| DIN 65090-1979 | 航空航天.用E型玻璃制成的玻璃纖維和預浸玻璃長絲織物(預浸漬體).技術規范條件 | Aerospace; textile glass, preimpregnated filament glass cloth from E-glass (Prepreg), technical specifications |
| DIN 65116-1980 | 航空和航天.硼纖維增強的模塑材料.層壓試件的制備 | Aerospace; boron fibre reinforced mouldings, preparation of test laminates |
| DIN 65117-1980 | 航空和航天.預浸漬單向硼纖維層(BFK-浸漬體)，尺寸、質量 | Aerospace; preimpregnated unidirectional boron fibres (BFK-prepreg), dimensions, masses |
| DIN 65142-1989 | 航空航天.預浸漬的纖維薄板和纖維帶(預浸漬的).粘接強度的測定 | Aerospace; preimpregnated fibre sheet and tape (prepreg); determination of bond strength |
| DIN 65146-2-1991 | 航空航天.預浸漬的碳纖維長絲織物和環氧樹脂.技術規范 | Aerospace; preimpregnated woven fabric of carbon filament yarn and epoxy resin; technical specification |
| DIN 65147-1-1987 | 航空航天.碳素纖維.碳素纖維長絲織物.尺寸、質量 | Aerospace; carbon fibres; fabric of carbon fibre filament yarn; dimensions, masses |
| DIN 65147-2-1987 | 航空航天.碳纖維.碳纖維長絲織物.技術規范 | Aerospace; carbon fibres; fabric of carbon fibre filament yarn; technical specification |
| DIN 65148-1986 | 航空航天.纖維增強塑料的試驗.用拉伸試驗測定中層間的抗剪強度 | Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test |
| DIN 65184-1993 | 航空航天.碳纖維.高性能碳纖維素長絲紗.尺寸和質量 | Aerospace; carbon fibres; high performance carbon fibre filament yarns; dimensions, masses |
| DIN 65375-1989 | 航空航天.纖維增強的塑料.單向?qū)訅喊宓脑囼?yàn).與纖維方向垂直的壓力試驗 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction |
| DIN 65378-1989 | 航空航天.纖維增強的塑料.單向?qū)訅喊宓臋z驗.與纖維方向垂直的拉伸試驗 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction |
| DIN 65382-1988 | 航空航天.塑料用加強纖維.浸漬紗線試樣的拉力試驗 | Aerospace; reinforcement fibres for plastics; tensile test of impregnated yarn test specimens |
| DIN 65383-1997 | 航空航天.結構用熱固環氧樹脂紡織玻璃纖維長絲織物預浸漬品.技術規范 | Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification |
| DIN 65453-1993 | 航空航天.碳纖維和雙馬來酰亞胺樹脂或聚酰亞胺樹脂制的預浸漬不定向薄板材 | Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification |
| DIN 65466-1996 | 航空航天.纖維增強塑料.單向?qū)訅褐破吩囼?yàn).拉伸剪切強度和剪切模數測定 | Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension |
| DIN 65469-1992 | 航空航天.纖維增強的塑料.單層扁平拉伸樣件的拉伸試驗 | Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens |
| DIN 65474-1992 | 航空航天.纖維增強的塑料.溫度鋒值試驗方法 | Aerospace; fibre reinforced plastics; thermal-spike test method |
| DIN 65559-1991 | 航空航天.纖維增強的塑料.多向?qū)訅喊宓脑囼?yàn).缺口孔抗拉強度的測定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of open-hole tensile strength |
| DIN 65560-1991 | 航空航天.纖維增強的塑料.多向?qū)訅喊宓脑囼?yàn).已填充孔抗壓強度的測定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength |
| DIN 65561-1991 | 航空航天.纖維增強的塑料.多向?qū)訅喊宓脑囼?yàn).沖擊試驗負荷后抗壓強度的測定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of compressive strength after impact test |
| DIN 65562-1991 | 航空航天.纖維增強的塑料.多向?qū)訅喊宓脑囼?yàn).支承強度的測定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of bearing strength |
| DIN 65564-1992 | 航空航天.增強纖維.用HPLC法對碳素長絲紗、織物和短切原絲的漿成份進行定性測定 | Aerospace; reinforcement fibres; qualitative determination of size constituents of carbon filament yarns, woven fabrics and chopped strands by HPLC |
| DIN 65565-1992 | 航空航天.增強纖維.用紅外分光法對碳素長絲紗、織物和短切原絲的漿類型進行定性試驗 | Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy |
| DIN 65566-1992 | 航空航天.增強纖維.碳素長絲紗、織物和短切原絲的漿含量的測定 | Aerospace; reinforcement fibres; determination of size content of carbon filament yarns, woven fabrics and chopped strands |
| DIN 65567-1992 | 航空航天.增強纖維.芳族聚酰胺長絲紗,織物和短切原絲的整理劑含量的測定 | Aerospace; reinforcement fibres; determination of finish content of aramid filament yarns, woven fabrics and chopped strands |
| DIN 65568-1992 | 航空航天.增強纖維.碳素長絲紗、織物和短切原絲的耐熱氧化性能的測定 | Aerospace; reinforcement fibres; determination of thermal oxidative resistance of carbon filament yarns, woven fabrics and short cuts |
| DIN 65569-1-1992 | 航空航天.增強纖維.復絲紗密度的測定.懸浮法 | Aerospace; reinforcement fibres; determination of density of filament yarns; sink-float method |
| DIN 65569-2-1992 | 航空航天.增強纖維.復絲紗密度的測定.流體比重秤量法 | Aerospace; reinforcement fibres; determination of density of filament yarns; hydrostatic weighing method |
| DIN 65571-1-1992 | 航空航天.增強纖維.復絲紗橫截面面積和復絲紗直徑的測定.計算方法 | Aerospace; reinforcement fibres; determination of filament diameter and cross-sectional area of filament yarns; calculation method |
| DIN 65571-2-1992 | 航空和航天.增強纖維.復絲紗直徑的測定.縱向投影法 | Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; longitudinal projection method |
| DIN 65571-3-1992 | 航空航天.增強纖維.長絲紗的長絲直徑、長絲橫截面形狀和橫截面面積的測定.橫磨測量 | Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section |
| DIN 65571-4-1992 | 航空航天.增強纖維.復絲紗的長絲直徑的測定.激光干涉測量法 | Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry |
| DIN 65572-1992 | 航空航天.碳纖維和無活性熱塑塑料制單向片材和帶材的預浸料.技術規范 | Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification |
| DIN 65583-1999 | 航空航天.纖維增強塑料.動態負荷下纖維復合材料的玻璃化轉變的測定 | Aerospace - Fibre reinforced materials - Determination of glass transition of fibre composites under dynamic load |
| DIN 65597-1993 | 航空航天.纖維增強塑料.放熱反應時溫差的測定 | Aerospace; fibre reinforced plastics; determination of temperature difference on exothermic reaction |
| DIN 65598-1993 | 航空航天.纖維增強塑料.層壓制品裂紋頻度的測定 | Aerospace; fibre reinforced plastics; determination of cracking frequency on laminates |
| DIN 65629-1993 | 航空航天.碳纖維和非活性熱塑塑料制預浸漬纖維薄板材和帶材. 技術規范 | Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification |
| DIN 65673-1999 | 航空航天.纖維增強塑料.紗疵,織疵和預浸漬體疵點的定義 | Aerospace - Fibre reinforced plastics - Description of yarn, fabric and prepreg defects |
| DIN 68100 Bb.4-1978 | 木材處理和加工的線性測量和角度量綱的公差.受濕度影響刨花板、膠合板和纖維板在厚度、長度和寬度方向的尺 | Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard |
| DIN 6899-1988 | 纖維繩索的鋼套環 | Steel thimbles for fibre ropes |
| DIN 7737-1959 | 層壓制品.硬化纖維.型號 | Laminated Products; Vulcanized Fibre, Types |
| DIN 7738-1959 | 層壓材料制品.硬化纖維板.驗收.檢驗方法 | Laminated Products; Vulcanized Fibre, Acceptance, Test Methods |
| DIN 7742-1-1988 | 塑料模塑材料.纖維素聚酯類(CA, CP, CAB)熱塑性模塑材料.分類和名稱 | Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation |
| DIN 7742-2-1990 | 纖維素酯(CA.CPCAB)模塑材料.第2部分:模塑材料試樣的制備和性能測定 | Cellulose ester (CA, CP, CAB) moulding materials; preparation of specimens and determination of their properties |
| DIN 81921-1982 | 纖維繩的加強線夾 | Belaying cleats for fibre ropes |
| DIN 83307-1999 | 船舶和海上技術.圓形或螺旋形編織的化學纖維繩索 | Ships and marine technology - Round or spiral plated man-made fibre ropes |
| DIN 83319-1999 | 纖維繩索.捻接繩.定義、安全性要求.試驗方法 | Fibre ropes - Splices - Definitions, safety requirements, test method |
| DIN 83329-1998 | 造船和海上技術.按韌皮纖維紡紗加工系統生產的紗線制的聚丙烯纖維繩索 | Ships and marine technology - Polypropylene fibre ropes made of yarns produced on bast fibre spinning systems |
| DIN 83334-1999 | 船舶和海上技術.高拉伸強度多絲制聚丙烯纖維繩索 | Ships and marine technology - Polypropylene fibre ropes, made of high-tensile multifilament |
| DIN CEN/TS 14578-2003 | 給水或排水排污用塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GRP).安裝的推薦性實施規 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2003 |
| DIN CEN/TS 14807-2005 | 塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GRP).地下GRP-UP管道的結構分析指南 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004 |
| DIN CEN/TS 15365-2006 | 高級工業陶瓷.無化學反應環境的高溫條件下陶瓷纖維的機械性能.通過冷端法測定儒變特性 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method; German version CEN/TS 15365:2006 |
| DIN CEN/TS 15658-2007 | 高級工業陶瓷.無反應環境高溫條件下陶瓷纖維的機械特性.用熱端法測定儒變性能 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method; German version CEN/TS 15658:2007 |
| DIN EN 1007-3-2002 | 高技術陶瓷.陶瓷復合材料.增強的試驗方法.第3部分:長纖維直徑和橫截面積的測定; 德文版本 EN 1007-3:2002 | Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area; German version EN 1007-3:2002 |
| DIN EN 1007-4-2004 | 高級工業陶瓷.陶瓷復合材料.纖維增強的試驗方法.第4部分:環境溫度下長纖維的抗拉性能測定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature; German version EN 1007-4:2004 |
| DIN EN 1007-5-2003 | 高級工業陶瓷.陶瓷復合材料.增強纖維的試驗方法.第5部分:室溫下復絲束中長絲斷開時的拉伸強度和拉伸應變分 | Advanced technical ceramics - Ceramic composites; Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature; German version EN 1007-5:2003 |
| DIN EN 1013-2-1999 | 單層屋頂反光塑料型板.第2部分:玻璃纖維增強聚酯樹脂板(GF-UP)特殊要求和試驗方法 | Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP); German version EN 1013-2:1998 |
| DIN EN 1094-1-1997 | 絕緣耐火產品.第1部分:陶瓷纖維制品術語 | Insulating refractory products - Part 1: Terminology for ceramic fibre products; German version EN 1094-1:1997 |
| DIN EN 1094-3-2003 | 隔熱耐火產品.第3部分:陶瓷纖維隔熱制品的分類 | Insulating refractory products - Part 3: Classification of insulating products made from ceramic fibres; German version EN 1094-3:2003 |
| DIN EN 1119-1996 | 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管和配件.密封性和耐柔性連接和鉸鏈連接磨損能力試驗方法 | Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996 |
| DIN EN 1120-1996 | 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管和配件.彎曲狀態下管道內壁抗化學腐蝕能力測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996 |
| DIN EN 1169-1999 | 混凝土預制件.玻璃纖維增強混凝土工廠生產控制一般規則 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement; German version EN 1169:1999 |
| DIN EN 1170-1-1998 | 混凝土預制件.玻璃纖維增強混凝土的試驗方法.第1部分:基質一致性的測量.坍落試驗法 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix; "Slump test" method; German version EN 1170-1:1997 |
| DIN EN 1170-2-1998 | 混凝土預制件.玻璃纖維增強混凝土用檢驗方法.第2部分:新鮮的玻璃纖維混凝土中纖維含量的測定.沖洗試驗 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997 |
| DIN EN 1170-3-1998 | 混凝土預制件.玻璃纖維增強混凝土試驗方法.第3部分:噴射GRC中纖維含量測量 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German version EN 1170-3:1997 |
| DIN EN 1170-4-1998 | 混凝土預制件.玻璃纖維增強混凝土試驗方法.第4部分:抗彎強度測量.簡化抗彎試驗法 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997 |
| DIN EN 1170-5-1998 | 混凝土預制件.玻璃纖維增強混凝土試驗方法.第5部分:抗彎強度測量.完整抗彎試驗法 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997 |
| DIN EN 1170-6-1998 | 混凝土預制件.玻璃纖維增強混凝土試驗方法.第6部分:浸入法水吸附和干密度測定 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density; German version EN 1170-6:1997 |
| DIN EN 1170-7-1998 | 混凝土預制件.玻璃纖維增強混凝土試驗方法.第7部分:濕度引起尺寸變化極限值測量 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content; German version EN 1170-7:1997 |
| DIN EN 12195-2-2001 | 道路車輛上的裝載物固定裝置.安全.第2部分:人造纖維制成的捆綁網 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres; German version EN 12195-2:2000 |
| DIN EN 1225-1996 | 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.潮濕蠕變系數測定和長時期規定圓度穩定性計算 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness; German version EN 1225:1996 |
| DIN EN 1226-1996 | 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.耐初始圓度變形驗證方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection; German version EN 1226:1996 |
| DIN EN 1227-1998 | 塑料管道系統.玻璃纖維增強熱固塑料管(GFK).測定潮濕條件下環形件持久變形性 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions; German version EN 1227:1997 |
| DIN EN 1228-1996 | 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.初始規定圓度穩定性測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996 |
| DIN EN 1229-1996 | 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.管壁短期內壓密封性驗證試驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996 |
| DIN EN 12369-1-2001 | 木板.結構設計特征值.第1部分:OSB.碎料板和纖維板 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001 |
| DIN EN 12467-2000 | 纖維水泥平板材.產品規范和試驗方法 | Fibre-cement flat sheets - Product specifications and test methods; German version EN 12467:2000 |
| DIN EN 12562-1999 | 紡織品.Para-aramid多纖維紗.檢驗方法 | Textiles - Para-aramid multifilament yarns - Test methods; German version EN 12562:1999 |
| DIN EN 12575-1998 | 塑料.熱固成形模塑化合物.SMC中纖維濕潤級的測定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC; German version EN 12575:1998 |
| DIN EN 12576-1998 | 塑料.纖維增強的復合材料.SMC,BMC和DMC制模壓試驗板件的備制 | Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998 |
| DIN EN 12590-1999 | 紡織品.全部或部分由合成纖維制成的工業縫紉線 | Textiles - Industrial sewing threads made wholly or partly from synthetic fibres; German version EN 12590:1999 |
| DIN EN 1261-1995 | 一般用途纖維繩索.大麻繩 | Fibre ropes for general service - Hemp; German version EN 1261:1995 |
| DIN EN 12654-1-1998 | 紡織玻璃纖維.紗線.第1部分:標識 | Textile glass - Yarns - Part 1: Designation; German version EN 12654-1:1998 |
| DIN EN 12654-2-1998 | 紡織玻璃纖維.紗線.第2部分:試驗方法和一般要求 | Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998 |
| DIN EN 12654-3-1998 | 紡織玻璃纖維.紗線.第3部分:通用的一般要求 | Textile glass - Yarns - Part 3: General requirements for general applications; German version EN 12654-3:1998 |
| DIN EN 12710-2006 | 纖維紙板筒.標稱容量15～250升帶鎖緊圈的活動頭(開口)紙筒 | Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l English version of DIN EN 12710:2006-08 |
| DIN EN 12751-1999 | 紡織品.試驗用纖維、紗和織物的抽樣 | Textiles - Sampling of fibres, yarns and fabrics for testing; German version EN 12751:1999 |
| DIN EN 12763-2000 | 建筑物排水系統纖維水泥管道和配件.尺寸和交貨技術條件 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000 |
| DIN EN 12971-1-1999 | 增強纖維.紡織玻璃短纖維絲的規范.第1部分:標識 | Reinforcements - Specification for textile glass chopped strands - Part 1: Designation; German version EN 12971-1:1999 |
| DIN EN 12971-2-1999 | 增強纖維.紡織玻璃短纖維絲的規范.第2部分:試驗方法和一般要求 | Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements; German version EN 12971-2:1999 |
| DIN EN 12971-3-1999 | 增強纖維.紡織玻璃短纖維絲的規范.第3部分:技術要求 | Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements; German version EN 12971-3:1999 |
| DIN EN 13002-2-1999 | 碳纖維長絲紗.第2部分:試驗方法和通用規范 | Carbon fibre yarns - Part 2: Test methods and general specifications; German version EN 13002-2:1999 |
| DIN EN 13010-2003 | 包裝.單元包裝.硬質纖維板顯示的尺寸和要求 | Packaging - Unit packaging - Dimensions and requirements for pegboard display; German version EN 13010:2003 |
| DIN EN 13121-4 Berichtigung 1-2007 | 地上用玻璃纖維增強塑料(GRP)儲罐和容器.第4部分:交付、安裝和維修.DIN EN 13121-4-2005技術勘誤 | GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance; German version EN 13121-4:2005, Corrigenda to DIN EN 13121-4:2005-03; German version EN 13121-4:2005/AC:2007 |
| DIN EN 13168-2001 | 建筑物隔熱產品.工廠制木纖維制品.規范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001 |
| DIN EN 13171 Berichtigung 1-2006 | 建筑物用絕熱產品.工廠生產的木纖維產品.規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001, Corrigenda to DIN EN 13171:2001-10; German version EN 13171:2001/AC:2005 |
| DIN EN 13171-2001 | 建筑物隔熱產品.工廠制木纖維制品.規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001 |
| DIN EN 13171/A1-2004 | 建筑物用熱隔絕產品.工廠制木纖維產品.規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001/A1:2004 |
| DIN EN 13280-2001 | 地上儲存冷水用整體式和組合式玻璃纖維增強儲水池規范 | Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water; German version EN 13280:2001 |
| DIN EN 13360-2003 | 橡膠或涂塑纖維.三語種術語 | Rubber- or plastics-coated fabrics - Terminology; Trilingual version EN 13360:2002 |
| DIN EN 13392-2001 | 紡織材料.單纖維絲.線密度測定 | Textiles - Monofilaments - Determination of linear density; German version EN 13392:2001 |
| DIN EN 13413-2002 | 地板彈性鋪覆物.帶填充纖維襯底的聚氯乙烯地板鋪覆物.規范 | Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification; German version EN 13413:2001 |
| DIN EN 13421-2006 | 塑料.熱模化合物.復合和增強纖維.壓模化合物的向異性能測定用試樣制備 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites English version of DIN EN 13421:2006-05 |
| DIN EN 13473-1-2001 | 增強.多軸多股纖維織物規范.第一部分:命名 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation; German version EN 13473-1:2001 |
| DIN EN 13473-2-2001 | 增強.多軸多股纖維織物規范.第2部分:試驗方法和一般要求 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; German version EN 13473-2:2001 |
| DIN EN 13473-3-2001 | 增強.多軸多股纖維織物規范.第3部分:特殊要求 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements; German version EN 13473-3:2001 |
| DIN EN 13496-2003 | 建筑物熱絕緣產品.玻璃纖維絕熱網機械特性測定 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes; German version EN 13496:2002 |
| DIN EN 13864-2004 | 運動場表面.合成纖維網線抗拉強度的測定 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004 |
| DIN EN 1393-1996 | 塑料管道系統.玻璃纖維增強熱固性塑料管(GFK).初始縱向拉伸性能測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996 |
| DIN EN 1394-1996 | 塑料管道系統.玻璃纖維增強熱固塑料管(GFK).切線方向表面管頭拉伸性能測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996 |
| DIN EN 14020-1-2003 | 增強材料.玻璃纖維粗紗規范.第1部分:命名 | Reinforcements - Specification for textile glass rovings - Part 1: Designation; German version EN 14020-1:2002 |
| DIN EN 14020-2-2003 | 增強材料.玻璃纖維粗紗規范.第2部分:試驗方法和一般要求 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements; German version EN 14020-2:2002 |
| DIN EN 14020-3-2003 | 增強材料.玻璃纖維粗紗規范.第3部分:特殊要求 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements; German version EN 14020-3:2002 |
| DIN EN 14053-2003 | 包裝.波紋板或?qū)嵭睦w維紙板制成的包裝件 | Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction; German version EN 14053:2003 |
| DIN EN 14278-1-2004 | 紡織品.棉纖維黏性的測定.第1部分:使用手工熱檢測設備的方法 | Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004 |
| DIN EN 14278-2-2004 | 紡織品.棉纖維黏性的測定.第2部分:使用自動熱檢波板設備的方法 | Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004 |
| DIN EN 14278-3-2004 | 紡織品.棉纖維黏性的測定.第3部分:使用自動熱檢波旋轉鼓設備的方法 | Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device; German version EN 14278-3:2004 |
| DIN EN 14362-2 Berichtigung 1-2005 | 紡織品.衍生自偶氮染色劑的特定芳香胺的測定方法.第2部分:經纖維萃取獲得的偶氮染色劑使用的檢測.DIN EN 14 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003, Corrigenda to DIN EN 14362-2:2003-12; German version EN 14362-2:2003/AC:2005 |
| DIN EN 14362-2-2003 | 紡織品.衍生自偶氮染色劑的特定芳香胺的測定方法.第2部分:通過萃取纖維取得的偶氮染色劑使用的檢測 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003 |
| DIN EN 1444-2001 | 纖維水泥管.敷設和現場施工指南 | Fibre-cement pipelines - Guide for laying and on-site work practices; German version EN 1444:2000 |
| DIN EN 14447-2005 | 纖維增強塑料.玻璃墊增強熱塑性塑料.流動性和固化的測定 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005 |
| DIN EN 1447-1996 | 塑料管道系統.玻璃纖維增強熱固塑料管(GFK).內壓耐久性能測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longterm resistance to internal pressure; German version EN 1447:1996 |
| DIN EN 1448-1997 | 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.抗拉套管和頂尖與彈性體密封件連接的結構類型檢驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996 |
| DIN EN 14488-3-2006 | 檢測噴射混凝土.第3部分:纖維鋼筋梁的撓曲強度（第一峰、最后和殘余） | Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09 |
| DIN EN 14488-5-2006 | 噴射混凝土試驗.第5部分:纖維鋼筋混凝土板樣本的能量吸收能力的測定 | Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens English version of DIN EN 14488-5:2006-08 |
| DIN EN 14488-7-2006 | 檢測噴射混凝土.第7部分:纖維鋼筋混凝土的纖維含量 | Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete English version of DIN EN 14488-7:2006-08 |
| DIN EN 1449-1997 | 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.已粘接套管和頂尖連接件結構類型檢驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of a cemented socket- and -spigot joints; German version EN 1449:1996 |
| DIN EN 1450-1999 | 塑料管道系統.玻璃纖維增強的熱固塑料部件(GFK).對采用螺栓固定的法蘭連接點的設計進行驗證的試驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998 |
| DIN EN 14525-2005 | 不同材料(球墨鑄鐵、灰鑄鐵、鋼、PVC-U、PE和纖維水泥)管道用球墨鑄鐵大公差聯接器和法蘭接頭 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004 |
| DIN EN 14649-2005 | 預制混凝土產品.水泥和混凝土中玻璃纖維殘留強力的試驗方法(SIC試驗) | Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST); German version EN 14649:2005 |
| DIN EN 14650-2005 | 預澆鑄混凝土產品.金屬纖維混凝土工廠生產控制通用規則 | Precast concrete products - General rules for factory production control of metallic fibered concrete; German version EN 14650:2005 |
| DIN EN 14684-2005 | 聚酯纖維繩索.雙層編織結構 | Polyester fibre ropes - Double braid construction; German version EN 14684:2004 |
| DIN EN 14685-2005 | 聚酰胺纖維繩索.雙層編織結構 | Polyamide fibre ropes - Double braid construction; German version EN 14685:2004 |
| DIN EN 14686-2005 | 聚酯/聚烯烴雙纖維的纖維繩索 | Fibre ropes of polyester/polyolefin dual fibres; German version EN 14686:2004 |
| DIN EN 14687-2005 | 混合聚烯烴纖維繩索 | Mixed polyolefin fibre ropes; German version EN 14687:2004 |
| DIN EN 14704-3-2007 | 測定紡織物彈性.第3部分:窄帶纖維 | Determination of the elasticity of fabrics - Part 3: Narrow fabrics; English version of DIN EN 14704-3:2007-03 |
| DIN EN 14768-2005 | 纖維板桶.公稱容量為5l到600l帶滑動蓋的可移動頂端(敞口)桶 | Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l; German version EN 14768:2005 |
| DIN EN 14845-1-2007 | 混凝土纖維試驗方法.第1部分:比對混凝土 | Test methods for fibres in concrete - Part 1: Reference concretes; German version EN 14845-1:2007 |
| DIN EN 14845-2-2006 | 混凝土纖維試驗方法.第2部分:混凝土效果 | Test methods for fibres in concrete - Part 2: Effect on concrete; English version of DIN EN 14845-2:2006-11 |
| DIN EN 14889-1-2006 | 混凝土纖維.第1部分:鋼纖維.定義、規范和一致性 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity; English version of DIN EN 14889-1:2006-11 |
| DIN EN 14889-2-2006 | 混凝土纖維.第2部分:纖維聚合物.定義、規范和一致性 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity; English version of DIN EN 14889-2:2006-11 |
| DIN EN 1492-1-2000 | 紡織吊索.安全.第1部分:普通化學纖維織造的帶狀吊索 | Textile slings - Safety - Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use; German version EN 1492-1:2000 |
| DIN EN 1492-2-2000 | 織物吊索.安全性.第2部分:普通化學纖維制圓吊索 | Textile slings - Safety - Part 2: Roundslings, made of man-made fibres, for general purpose use; German version EN 1492-2:2000 |
| DIN EN 1492-4-2004 | 紡織吊索.安全.第4部分:通用天然和人造纖維繩制起重吊索 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes; German version EN 1492-4:2004 |
| DIN EN 15057-2006 | 纖維增強水泥薄板.耐沖擊試驗方法 | Fibre cement profiled sheets - Impact resistance test method English version of DIN EN 15057:2006-09 |
| DIN EN 15319-2007 | 纖維(石膏)灰泥工程設計的一般原則 | General principles of design of fibrous (gypsum) plaster works; German version EN 15319:2007 |
| DIN EN 1638-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管.圓筒內壓循環作用試驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure; German version EN 1638:1997 |
| DIN EN 1787-2000 | 食品.用ESR分光光度法檢測經過輻射的含纖維素食品 | Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German version EN 1787:2000 |
| DIN EN 181000-1995 | 一般規范.纖維光學分支器; 德文版本 EN 181000:1994 | Generic specification: Fibre optic branching devices; German version EN 181000:1994 |
| DIN EN 181101-1995 | 空白詳細規范.纖維光學分支器.型號:非波長選擇星型傳送器; 德文版本 EN 181101:1994 | Blank detail specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star; German version EN 181101:1994 |
| DIN EN 181102-1995 | 空白詳細規范.纖維光學分支器.型號:非波長選擇星形傳送器; 德文版本 EN 181102:1994 | Blank detail specification: Fibre optic branching devices - Type: Wavelength selective transmissive star; German version EN 181102:1994 |
| DIN EN 1862-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料管(GFK).在化學環境下存放后相對蠕變系數的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment; German version EN 1862:1997 |
| DIN EN 186260-1998 | 分規范.光學纖維和光纖電纜的連接器裝置.SC型 | Sectional specification: Connector sets for optical fibres and cables - Type SC; German version EN 186260:1997 |
| DIN EN 186290-1998 | 分規范.光學纖維和光纖電纜的連接器裝置.MPO型 | Sectional specification: Connector sets for optical fibres and cables - Type MPO; German version EN 186290:1997 |
| DIN EN 1916-2003 | 未加筋、鋼纖維和加筋混凝土管和配件 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced; German version EN 1916:2002 |
| DIN EN 23035-1994 | 單面和單壁瓦楞纖維紙板.平面耐壓碎的測定 (ISO 3035:1982); 德文版本 EN 23035:1994 | Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982); German version EN 23035:1994 |
| DIN EN 2329-1993 | 航空航天.紡織玻璃纖維預浸帶.測定單位面積質量的試驗方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993 |
| DIN EN 2330-1993 | 航空航天.紡織玻璃纖維預浸帶.測定易揮發物質的試驗方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter; german version EN 2330:1993 |
| DIN EN 2331-1993 | 航空航天.紡織玻璃纖維預浸帶.測定樹脂含量、纖維含量以及單位面積纖維質量的試驗方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993 |
| DIN EN 2332-1993 | 航空航天.紡織玻璃纖維預浸帶.測定樹脂流動的試驗方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993 |
| DIN EN 2374-1991 | 航空航天.玻璃纖維增強的模壓件和夾芯復合材料.試驗板的生產 | Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991 |
| DIN EN 2377-1989 | 航空航天系列.玻璃纖維增強的塑料.外表層間抗剪強度的測定 | Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989 |
| DIN EN 2378-1995 | 航空航天系列.纖維增強塑料.通過浸入測定吸水量; 德文版本 EN 2378:1995 | Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995 |
| DIN EN 2489-1995 | 航空航天系列.纖維增強塑料.試驗流體影響的測定; 德文版本 EN 2489:1995 | Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995 |
| DIN EN 2557-1997 | 航空航天系列.碳纖維預浸帶.單位面積重量測定 | Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997 |
| DIN EN 2558-1997 | 航空航天系列.碳纖維預浸漬物.易揮發成份測定 | Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997 |
| DIN EN 2559-1997 | 航空航天系列.碳纖維預浸帶.樹脂成份、纖維成份以及單位面積纖維重量測定 | Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997 |
| DIN EN 2560-1998 | 航空航天系列.碳纖維預浸漬.樹脂流的測定 | Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998 |
| DIN EN 2561-1995 | 航空航天系列.碳素纖維增強塑料.單向塑料層壓制品.纖維方向平行抗拉試驗; 德文版本 EN 2561:1995 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995 |
| DIN EN 2562-1997 | 航空航天系列.碳纖維增強塑料.單向?qū)訅核芰?與纖維方向平行的彎曲試驗 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997 |
| DIN EN 2563-1997 | 航空航天系列.碳纖維增強塑料.單向?qū)訅褐破?表觀層壓間抗切強度測定 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997 |
| DIN EN 2564-1998 | 航空航天系列.碳纖維層壓塑料.纖維含量、樹脂含量和氣孔的測定 | Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998 |
| DIN EN 2597-1998 | 航空航天系列.碳纖維增強的塑料.無向疊層材料.垂直纖維方向的拉力試驗 | Aerospace series - Carbon fibre reinforced plastics; unidirectional laminates - Tensile test perpendicular to the fibre direction; German version EN 2597:1998 |
| DIN EN 2743-2003 | 航空航天系列.纖維增強塑料.測試未老化材料前的標準調整程序 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001 |
| DIN EN 2746-1998 | 航空航天系列.玻璃纖維增強的塑料.繞曲試驗.三點彎曲試驗法 | Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998 |
| DIN EN 2747-1998 | 航空航天系列.玻璃纖維增強塑料.拉伸試驗 | Aerospace series - Glass fibre reinforced plastics - Tensile test; German version EN 2747:1998 |
| DIN EN 300-2006 | 定向纖維板(OSB).定義、分類和規范 | Oriented Strand Boards (OSB) - Definitions, classification and specifications English version of DIN EN 300:2006-09 |
| DIN EN 302-3-2006 | 承重木結構用粘合劑.試驗方法.第3部分:通過溫度和濕度循環試驗測定木纖維酸性腐蝕對橫向拉伸強度的影響.德 | Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength; German version EN 302-3:2004 + A1:2005 |
| DIN EN 316-1999 | 木纖維板.定義、分類和符號 | Wood fibreboards - Definition, classification and symbols; German version EN 316:1999 |
| DIN EN 317-1993 | 木屑板和纖維板.浸水厚度膨脹測定 | Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993 |
| DIN EN 319-1993 | 木屑板和纖維板.垂直于板面的抗拉強度測定 | Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993 |
| DIN EN 320-1993 | 纖維板.螺釘軸向拔出力測定 | Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993 |
| DIN EN 3665-1997 | 航空航天系列.清漆和涂料試驗方法.鋁合金耐纖維狀腐蝕試驗 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997 |
| DIN EN 3733-008-2007 | 航空航天系列.連續工作溫度150°C自鎖緊環連接的單路圓形光連接器.第008部分:EN4532(200mu/280mu纖維)的電 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-008:2006 |
| DIN EN 3733-009-2007 | 航空航天系列.連續工作溫度150°C自鎖緊環連接的單路圓形光學連接器.第009部分:EN4532(200mu/280mu纖維)的 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-009:2006 |
| DIN EN 382-1-1993 | 纖維板.表面吸濕性測定.經干燥處理的纖維板試驗方法 | Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993 |
| DIN EN 382-2-1994 | 纖維板.表面吸濕性測定.硬板試驗方法 | Fibreboards; determination of surface absorption; part 2: test method for hardboards; German version EN 382-2:1993 |
| DIN EN 40-7-2003 | 燈柱.第7部分:纖維增強聚酯復合燈柱的要求 | Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns; German version EN 40-7:2002 |
| DIN EN 492-2006 | 纖維混凝土石板及配件.產品規范和試驗方法 | Fibre cement slates and fittings - Product specification and test methods; German version EN 492:2004 + A1:2005 + A2:2006 |
| DIN EN 494-2007 | 纖維水泥成型薄板及其配件.產品規范和試驗方法 | Fibre-cement profiled sheets and fittings - Product specification and test methods; German version EN 494:2004+A1:2005+A2:2006+A3:2007 |
| DIN EN 50223-2001 | 易燃短纖維填料自動靜電應用設備 | Automatic electrostatic application equipment for flammable flock material; German version EN 50223:2001 |
| DIN EN 50353-2002 | 絕緣油.用顯微鏡計數法測定纖維污染 | Insulating oil - Determination of fibre contamination by the counting method using a microscope; German version EN 50353:2001 |
| DIN EN 50377-2-1-2002 | 光纖通信系統接頭組件和互連元件.產品規范.第2-1部分:端接在IEC 60793-2 B1類單模纖維上的FC-PC型接頭組件 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1: Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre; German version EN 50377-2-1:2001 |
| DIN EN 50377-5-1-2003 | 光纖通信系統中使用的連接器組和互連元件.產品規范.第5-1部分:端接在IEC 60793-2類B.1.1單模纖維上的EC型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specification - Part 5-1: Type EC terminated on IEC 60793-2, category B1.1 singlemode fibre; German version EN 50377-5-1:2003 |
| DIN EN 50377-7-1-2004 | 光纖通信系統中使用的連接器組件和互連元件.產品規范.第7-1部分:終接在IEC 60793-2 A1a 和 A1b類多模纖維上 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre; German version EN 50377-7-1:2004 |
| DIN EN 50377-7-2-2004 | 光纖通信系統中使用的連接器組件和互連元件.產品規范.第7-2部分:終接在IEC 60793-2 B1.1類單模纖維上的LC-P | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre; German version EN 50377-7-2:2004 |
| DIN EN 50411-2-2-2007 | 光纖通信系統用纖維形成體和閉路.產品規范.第2-2部分:S&A類用1型密封平蓋纖維接縫閉路 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A; German version EN 50411-2-2:2007 |
| DIN EN 50411-2-4-2006 | 用于光纖傳遞系統的纖維形成體和閉路.產品規范.第2-4部分:S&A類密封圓蓋纖維接縫閉路類型1 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A; German version EN 50411-2-4:2006 |
| DIN EN 50414-2007 | 聚氯乙烯絕緣和護套光電纖維電纜中鉛含量分析試驗方法.方法A:用火焰原子吸收分光光度測定含鉛總量.方法B:硫 | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining; German version EN 50414:2006 |
| DIN EN 512-1994 | 纖維混凝土制品.承壓管和連接件 | Fibre-cement products - Pressure pipes and joints; German version EN 512:1994 |
| DIN EN 512/A1-2002 | 纖維水泥制品.壓力管道和接頭.修改件A1:2001; 德文版本 EN 512:1994/A1:2001 | Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 |
| DIN EN 588-1-1996 | 纖維水泥污水管.第1部分:重力系統用管、連接件和配件 | Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems; German version EN 588-1:1996 |
| DIN EN 588-2-2002 | 排水管和下水道纖維水泥管.第2部分:人孔和檢查室 | Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers; German version EN 588-2:2001 |
| DIN EN 59-1977 | 玻璃纖維增強塑料.用巴氏(Barcol)硬度測量?jī)x測定硬度 | Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor |
| DIN EN 60249-2-1-2000 | 印制電路基材.第2部分:規范.第1號規范:高電氣質量酚醛纖維素紙覆銅層壓板 | Base materials for printed circuits - Part 2: Specifications; Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality (IEC 60249-2-1:1985 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German version EN 60249-2-1:1994 + A2:1994 + Corrig.:1994 + A3:1995 + A4:2000 |
| DIN EN 60249-2-2-2000 | 印制電路基材.第2部分:規范.第2號規范:經濟質量酚醛纖維素紙覆銅層壓板 | Base materials for printed circuits - Part 2: Specifications; Specification No. 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality (IEC 60249-2-2:1985 + A1:1989 + A2:1990 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-2:1994 + A3:1994 + Corrig.:1994 + A4:1995 + A5:2000 |
| DIN EN 60249-2-3-2000 | 印制電路基材.第2部分:規范.第3號規范:規定易燃性的環氧化合物纖維素紙覆銅層壓板(垂直燃燒試驗) | Base materials for printed circuits - Part 2: Specifications; Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-3:1987 + A1:1989 + A2:1993 + Corrig.:1994 + A3:1994 + A4:2000); German version EN 60249-2-3:1994 + A2:1994 + Corrig.:1994 + A3:1995 + A4:2000 |
| DIN EN 60249-2-4-2000 | 印制電路基材.第2部分:規范.第4號規范:普通級環氧化合物編織玻璃纖維覆銅層壓板 | Base materials for printed circuits - Part 2: Specifications; Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade (IEC 60249-2-4:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-4:1994 + A3:1994 + Corrig.:1994 + A4:1995 + A5:2000 |
| DIN EN 60317-0-4-2006 | 特種繞組線規范.第0-4部分:一般要求.玻璃纖維繞組浸樹脂或浸清漆裸扁銅線或漆包扁銅線 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-4:1997 + A1:1999 + A2:2005); German version EN 60317-0-4:1998 + A1:2000 + A2:2005 |
| DIN EN 60317-0-5-2007 | 特種繞組線規范.第0-5部分:一般要求.玻璃纖維編織樹脂或浸漆的裸或漆包扁銅線 | Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-5:2006); German version EN 60317-0-5:2007 |
| DIN EN 60317-0-6-2007 | 特種繞組線規范.第0-6部分:一般要求.玻璃纖維包浸樹脂或浸清漆的裸圓銅線或漆包圓銅線 | Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001 + A1:2006); German version EN 60317-0-6:2001 + A1:2006 |
| DIN EN 60317-48-2000 | 特種繞組線規范.第48部分:溫度指數155的玻璃纖維纏繞樹脂或清漆浸漬裸圓銅線或漆包圓銅線 | Specification for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999); German version EN 60317-48:2000 |
| DIN EN 60317-49-2000 | 特種繞組線規范.第49部分:溫度指數180的玻璃纖維繞包樹脂或漆浸漬裸或漆包圓銅線 | Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:1999); German version EN 60317-49:2000 |
| DIN EN 60317-50-2000 | 特種繞組線規范.第50部分:溫度指數200的玻璃纖維繞包樹脂或漆浸漬裸或漆包圓銅線 | Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); German version EN 60317-50:2000 |
| DIN EN 60450-2005 | 新的和老化的纖維素電氣絕緣材料的粘均聚合度測量 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004); German version EN 60450:2004 |
| DIN EN 60454-3-10-1997 | 電工壓敏膠帶.第3部分:各型材料規范.第10節:帶橡膠制熱固性膠的醋酸丁酸纖維素薄膜膠帶要求 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive (IEC 60454-3-10:1995); German version EN 60454-3-10:1995 |
| DIN EN 60454-3-11-1999 | 電工用壓敏膠帶.第3部分:各型材料規范.第11頁:帶熱固橡膠膠粘材料的皺折纖維素紙和聚乙烯對酞酸鹽薄膜合成 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 11: Combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive (IEC 60454-3-11:1998); German version EN 60454-3-11:1998 |
| DIN EN 60454-3-4-1999 | 電工用的熱敏性粘膠帶.第3部分:單項材料規范.第4頁:帶熱固橡膠粘合劑的纖維素皺紋紙 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive (IEC 60454-3-4:1998); German version EN 60454-3-4:1998 |
| DIN EN 60454-3-5-1999 | 電工用的熱敏性粘膠帶.第3部分:單項材料規范.第5頁:帶熱固橡膠粘合劑的纖維素非皺紋紙 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive (IEC 60454-3-5:1998); German version EN 60454-3-5:1998 |
| DIN EN 60454-3-8 Berichtigung 1-2007 | 電工用壓敏粘帶.第3部分:單項材料規范.活頁8:玻璃布涂壓敏粘合劑的和獨立的醋酸纖維素或與纖維膠結合的編織 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006); German version EN 60454-3-8:2006, Corrigenda to DIN EN 60454-3-8 (VDE 0340-3-8):2006-12; CENELEC-Corrigendum December 2006 to EN 60454-3-8:2006 |
| DIN EN 60454-3-8-2006 | 電工用壓敏膠粘帶.第3部分:單項材料規范.活頁8:涂有基于玻璃纖維、醋酯纖維素或組合有粘膠纖維的壓敏膠粘劑 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006); German version EN 60454-3-8:2006 |
| DIN EN 60554-2-2002 | 電工用纖維素紙.第2部分:試驗方法 (IEC 60554-2:2001); 德文版本 EN 60554-2:2002 | Cellulosic papers for electrical purposes - Part 2: Methods of test (IEC 60554-2:2001); German version EN 60554-2:2002 |
| DIN EN 60684-3-300-2003 | 絕緣軟管.第3部分:各型軟管規范.300節:無涂層玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 |
| DIN EN 60684-3-340 bis 342-2004 | 絕緣軟套管.第3部分:各種型號套管的規范.第340至342活頁:可擴張編織的聚對苯二甲酸乙二醇酯纖維套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving (IEC 60684-3-340 to 342:2003); German version EN 60684-3-340 bis 342:2003 |
| DIN EN 60684-3-343 bis 345-2003 | 絕緣軟管.第3部分:各型軟管規范.343至345節:無涂層可擴張乙烯三氟氯乙烯纖維編織軟管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 |
| DIN EN 60684-3-400 bis 402-2003 | 絕緣軟管.第3部分:各型軟管規范.400至402節:帶硅彈性涂層的玻璃纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002 |
| DIN EN 60684-3-403 bis 405-2003 | 絕緣軟管.第3部分:各型軟管規范.403至405節:丙烯酸酯玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic coating (IEC 60684-3-403 to 405:2002); German version EN 60684-3-403 to 405:2002 |
| DIN EN 60684-3-406 bis 408-2004 | 絕緣軟管.第3部分:各種型號軟管規范.活頁406-408:帶PVC涂層的玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003 |
| DIN EN 60684-3-420 bis 422-2003 | 絕緣軟管.第3部分:各型軟管規范.420至422節:丙烯酸酯聚酯纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002 |
| DIN EN 60793-1-20-2002 | 光纖.第1-20部分:測量方法和試驗程序.纖維幾何形狀 (IEC 60793-1-20:2001); 德文版本 EN 60793-1-20:2002 | Optical fibres - Part 1-20: Measurement methods and test procedures; Fibre geometry (IEC 60793-1-20:2001); German version EN 60793-1-20:2002 |
| DIN EN 60793-1-30-2002 | 光纖.第1-30部分:測量方法和試驗程序.纖維驗證試驗 (IEC 60793-1-30:2001); 德文版本 EN 60793-1-30:2002 | Optical fibres - Part 1-30: Measurement methods and test procedures; Fibre proof test (IEC 60793-1-30:2001); German version EN 60793-1-30:2002 |
| DIN EN 60793-1-34-2007 | 光纖.第1-34部分:測量方法和試驗程序.纖維卷曲(IEC 60793-1-34-2006) | Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl (IEC 60793-1-34:2006); German version EN 60793-1-34:2006 |
| DIN EN 60793-1-41-2004 | 光學纖維.第1-41部分:測量方法和試驗程序.頻帶寬度 | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth (IEC 60793-1-41:2003); German version EN 60793-1-41:2003 |
| DIN EN 60793-2-2004 | 光學纖維.第2部分:產品規范.總則 | Optical fibres - Part 2: Product specifications - General (IEC 60793-2:2003); German version EN 60793-2:2004 |
| DIN EN 60793-2-40-2007 | 光纖.第2-40部分:產品規范.A4類別的多模纖維分規范(IEC 60793-2-40-2006) | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres (IEC 60793-2-40:2006); German version EN 60793-2-40:2006 |
| DIN EN 60793-2-50-2005 | 光學纖維.第2-50部分:產品規范.B級單模光纖分規范 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2004); German version EN 60793-2-50:2004 + Corrigendum:2004 |
| DIN EN 60794-2-10-2003 | 光學纖維電纜.第2-10部分:室內光纜.單工光纜和雙工光纜的系列規范 | Optical fibre cables - Part 2-10: Indoor cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2003); German version EN 60794-2-10:2003 |
| DIN EN 60794-2-20-2003 | 光學纖維電纜.第2-20部分:室內光纜.多纖配線電纜的系列規范 | Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003); German version EN 60794-2-20:2003 |
| DIN EN 60794-2-30-2003 | 光學纖維電纜.第2-30部分:室內光纜.帶狀光纜系列規范 | Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003); German version EN 60794-2-30:2003 |
| DIN EN 60794-2-31-2006 | 光學纖維電纜.第2-31部分:室內電纜.建筑群布纜用光纖帶狀電纜的詳細規范(IEC 60794-2-31:2005) | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC 60794-2-31:2005); German version EN 60794-2-31:2006 |
| DIN EN 60819-1-1997 | 非纖維素電工紙.第1部分:定義和一般要求 | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements (IEC 60819-1:1995 + A1:1996); German version EN 60819-1:1995 + A1:1996 |
| DIN EN 60819-2-2002 | 電工用非纖維素紙.第2部分:試驗方法 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test (IEC 60819-2:2001); German version EN 60819-2 2001 |
| DIN EN 60819-3-1-2002 | 電工用非纖維素紙.第3部分:專用材料規范:第1頁:填充玻璃紙 (IEC 60819-3-1:2001); 德文版本 EN 60819-3-1:2 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Filled glass paper (IEC 60819-3-1:2001); German version EN 60819-3-1:2001 |
| DIN EN 60819-3-2-2002 | 電工用非纖維素紙.第3部分:專用材料規范:第2頁:混合式無機-有機紙 (IEC 60819-3-2:2001); 德文版本 EN 6081 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Hybrid inorganic-organic paper (IEC 60819-3-2:2001); German version EN 60819-3-2:2001 |
| DIN EN 60819-3-3-2007 | 電工用非纖維素紙.第3部分:單項材料規范.活頁3:非填充聚芳酰胺紙 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers (IEC 60819-3-3:2006); German version EN 60819-3-3:2006 |
| DIN EN 60819-3-4-2002 | 電工用非纖維素紙.第3部分:專用材料規范:第4頁:含有不超過50%云母顆粒的芳族聚酰胺纖維紙 (IEC 60819-3-4:2 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles (IEC 60819-3-4:2001); German version EN 60819-3-4:2001 |
| DIN EN 60869-1-2001 | 纖維光學衰減器.第1部分:總規范 | Fibre optic attenuators - Part 1: Generic specification (IEC 60869-1:1999); German version EN 60869-1:2000 |
| DIN EN 60874-1-2007 | 纖維光學和光纜的連接器.第1部分:總規范 | Connectors for optical fibres and cables - Part 1: Generic specification (IEC 60874-1:2006); German version EN 60874-1:2007 |
| DIN EN 61067-1-1998 | 玻璃和玻璃聚酯纖維編織帶規范.第1部分:定義、分類和一般要求 | Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements (IEC 61067-1:1991); German version EN 61067-1:1997 |
| DIN EN 61067-2-1998 | 玻璃和玻璃聚酯纖維編織帶規范.第2部分:試驗方法 | Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test (IEC 61067-2:1992); German version EN 61067-2:1997 |
| DIN EN 61067-3-1-1998 | 玻璃和玻璃聚酯纖維編織帶規范.第3部分:各型材料規范.第1節:1、2、3型織帶 | Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995); German version EN 61067-3-1:1995 |
| DIN EN 61068-1-1998 | 聚酯纖維編織帶規范.第1部分:定義、命名和一般要求 | Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements (IEC 61068-1:1991); German version EN 61068-1:1997 |
| DIN EN 61068-2-1998 | 聚酯纖維編織帶規范.第2部分:試驗方法 | Specification for polyester fibre woven tapes - Part 2: Methods of test (IEC 61068-2:1991); German version EN 61068-2:1997 |
| DIN EN 61068-3-1-1998 | 聚酯纖維編織帶.第3部分:各型材料規范.第1節:常規或無梭織機編織帶 | Polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Tapes woven on conventional or shuttleless looms (IEC 61068-3-1:1995); German version EN 61068-3-1:1995 |
| DIN EN 61197-1996 | 絕緣油.火焰線性傳播.玻璃纖維試驗方法 | Insulating liquids - Linear flame propagation - Test methods using a glass-fibre tape (IEC 61197:1993); German version EN 61197:1994 |
| DIN EN 61202-1-2001 | 纖維光絕緣子.第1部分:一般規范 | Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000); German version EN 61202-1:2000 |
| DIN EN 61249-2-1-2005 | 印制板和其它互連結構用材料.第2-1部分:包被和非包被增強基材.經濟級包銅酚醛纖維素紙?jiān)鰪?qiáng)疊層板材 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad (IEC 61249-2-1:2005); German version EN 61249-2-1:2005 |
| DIN EN 61249-2-10 Berichtigung 1-2005 | 印制板和其它互聯結構用材料.第2-10部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被改良或未改良的 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad; (IEC 61249-2-10:2003); German version EN 61249-2-10:2003, Corrigenda to DIN EN 61249-2-10:2004-01 |
| DIN EN 61249-2-10-2004 | 印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.規定了易燃性的包銅的改良或未改良的氰酸酯 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-10:2003); German version EN 61249-2-10:2003 |
| DIN EN 61249-2-11 Berichtigung 1-2005 | 印制板和其他互聯結構用材料.第2-11部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化 | Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad(IEC 61249-2-11:2003); German version EN 61249-2-11:2003, Corrigenda to DIN EN 61249-2-11:2004-06 |
| DIN EN 61249-2-11-2004 | 印制板和其它互連結構用材料.第2-11部分:包被和非包被增強基材料.阻燃型銅包被的聚酰亞胺溴化環氧改良或非 | Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-11:2003); German version EN 61249-2-11:2003 |
| DIN EN 61249-2-18-2002 | 印制板和其它互連結構用材料.第2-18部分:包層或非包層增強式基材料.規定的可燃性包銅聚酯非編織玻璃纖維增 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials clad and unclad; Polyester non-woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-18:2002); German version EN 61249-2-18:2002 |
| DIN EN 61249-2-19-2002 | 印制板和其它互連結構用材料.第2-19部分:包層和非包層增強式基材料.規定的可燃性環氧交叉簾布層線性加筋纖 | Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad (IEC 61249-2-19:2001); German version EN 61249-2-19:2002 |
| DIN EN 61249-2-2-2005 | 印制板和其它互連結構用材料.第2-2部分:包被和非包被增強基材.高電氣級包銅酚醛纖維素紙?jiān)鰪?qiáng)疊層板材 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad (IEC 61249-2-2:2005); German version EN 61249-2-2:2005 |
| DIN EN 61249-2-21-2004 | 印制板和其它互連結構用材料.第2-21部分:包被和非包被增強基材料.阻燃型銅包被的非鹵代環氧編織E型玻璃纖維 | Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-21:2003); German version EN 61249-2-21:2003 |
| DIN EN 61249-2-22-2005 | 印制板和其他互連結構用材料.第2-22部分:包被和非包被增強基材.阻燃型銅包被的改良非鹵化環氧編織E型玻璃纖 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-22:2005); German version EN 61249-2-22:2005 |
| DIN EN 61249-2-23-2005 | 印制板和其他互連結構用材料.第2-23部分:包被和非包被增強基材.經濟級包銅非鹵化酚醛纖維素紙?jiān)鰪?qiáng)層壓板材 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad (IEC 61249-2-23:2005); German version EN 61249-2-23:2005 |
| DIN EN 61249-2-26-2005 | 印制板和其他互連結構用材料.第2-26部分:包被和非包被增強基材.阻燃型銅包被的非鹵化環氧非編織/編織E型玻 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-26:2005); German version EN 61249-2-26:2005 |
| DIN EN 61249-2-4-2002 | 印制板和其它互連結構用材料.第2-4部分:包層和非包層增強式基材料.規定的可燃性包銅聚酯非編織/編織玻璃纖 | Materials for printed boards and other for interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-wowen/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-4:2001); German version EN 61249-2-4:2002 |
| DIN EN 61249-2-5 Berichtigung 1-2005 | 印制板和其他互聯結構用材料.第2-5部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素 | Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-5:2003); German version EN 61249-2-5:2003, Corrigenda to DIN EN 61249-2-5:2004-06 |
| DIN EN 61249-2-5-2004 | 印制板和其它互連結構用材料.第2-5部分:包被和非包被增強基材料.阻燃型銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編 | Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-5:2003); German version EN 61249-2-5:2003 |
| DIN EN 61249-2-6-2004 | 印制板和其它互連結構用材料.第2-6部分:包被和非包被增強基材料.阻燃型銅包被的溴化環氧非編織/編織E型玻璃 | Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-6:2003); German version EN 61249-2-6:2003 |
| DIN EN 61249-2-8-2004 | 印制板和其它互連結構用材料.第2-8部分:包被和非包被增強基材.規定了易燃性的包銅的改良溴化環氧樹脂編織玻 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-8:2003); German version EN 61249-2-8:2003 |
| DIN EN 61249-2-9-2004 | 印制板和其它互連結構用材料.第2-9部分:包被和非包被增強基材.規定了易燃性的包銅的二順丁烯二酰亞胺/三嗪 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-9:2003); German version EN 61249-2-9:2003 |
| DIN EN 61274-1-1-2007 | 纖維光學連接器用適配器.第1-1部分:空白詳細規范 | Adaptors for fibre optic connectors - Part 1-1: Blank detail specification (IEC 61274-1-1:2006); German version EN 61274-1-1:2006 |
| DIN EN 61280-1-1-1999 | 纖維光學通信子系統基本試驗程序.第1部分:一般通信子系統的試驗程序 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC 61280-1-1:1998); German version EN 61280-1-1:1998 |
| DIN EN 61280-1-4-2003 | 光纖通信子系統試驗程序.第1-4部分:一般通信子系統.多模纖維激光發射機用二維近場數據的采集和整理 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003); German version EN 61280-1-4:2003 |
| DIN EN 61280-2-1-1999 | 纖維光學通信子系統基本試驗程序.第2-1部分:數字系統的試驗程序.接收機靈敏度和過載測量 | Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems; receiver sensitivity and overload measurement (IEC 61280-2-1:1998); German version EN 61280-2-1:1999 |
| DIN EN 61280-2-10-2006 | 纖維光學通信子系統試驗程序.第2-10部分:數字系統.激光發射機的時間分辨線性調頻脈沖和α因數測量(IEC 6128 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters (IEC 61280-2-10:2005); German version EN 61280-2-10:2005 |
| DIN EN 61280-2-4-1999 | 纖維光學通信子系統基本試驗程序.第2-4部分:數字系統試驗程序.比特率容差測量 | Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems; bit-rate tolerance measurement (IEC 61280-2-4:1998); German version EN 61280-2-4:1998 |
| DIN EN 61280-2-5-1999 | 纖維光學通信子系統基本試驗程序.第2-5部分:數字系統試驗程序.抖動轉移功能的測量 | Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems; jitter transfer function measurement (IEC 61280-2-5:1998); German version EN 61280-2-5:1998 |
| DIN EN 61280-2-8-2004 | 纖維光學通信子系統試驗程序.數字系統.第2-8部分:用品質因數測量法測定低位錯率 | Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements (IEC 61280-2-8:2003); German version EN 61280-2-8:2003 |
| DIN EN 61290-3-2-2003 | 光學（纖維）放大器.第3-2部分:噪音數字參數的試驗方法.電頻譜分析儀法 | Optical amplifiers - Part 3-2: Test methods for noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2003); German version EN 61290-3-2:2003 |
| DIN EN 61300-1-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第1部分:總則和指南 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:2003); German version EN 61300-1:2003 |
| DIN EN 61300-2-1-2003 | 纖維光學互連裝置和無源部件.基本試驗和測量步驟.第2-1部分:振動(正弦)試驗 | Fibre Optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests; Vibration (sinusoidal) (IEC 61300-2-1:2003); German version EN 61300-2-1:2003 |
| DIN EN 61300-2-16-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-16部分:試驗.霉菌生長 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth (IEC 61300-2-16:2006); German version EN 61300-2-16:2006 |
| DIN EN 61300-2-18-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-18部分:試驗.干熱.耐高溫性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance (IEC 61300-2-18:2005); German version EN 61300-2-18:2005 |
| DIN EN 61300-2-33-2007 | 纖維光學互聯裝置和無源部件.基本試驗和測量程序.第2-33部分:試驗.纖維光學外殼的安裝和拆卸 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic closures (IEC 61300-2-33:2006); German version EN 61300-2-33:2007 |
| DIN EN 61300-2-37-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-37部分:試驗.纖維光學外殼的光纜彎曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures (IEC 61300-2-37:2006); German version EN 61300-2-37:2007 |
| DIN EN 61300-2-38-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-38部分:試驗.加壓纖維光學接線盒的密封 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006); German version EN 61300-2-38:2006 |
| DIN EN 61300-2-4-1998 | 光纖互聯裝置和無源部件.基本試驗和測量程序.第2-4部分:試驗:纖維/電纜牢固性 (IEC 61300-2-4:1995); 德文 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests: Fibre/cable retention (IEC 61300-2-4:1995); German version EN 61300-2-4:1997 |
| DIN EN 61300-2-44-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-44部分:試驗.纖維光學器件應力消除的撓曲(IEC 61300-2 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2004); German version EN 61300-2-44:2005 |
| DIN EN 61300-2-46-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-46部分:試驗.濕氣熱循環 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic (IEC 61300-2-46:2006); German version EN 61300-2-46:2006 |
| DIN EN 61300-2-47-2007 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-47部分:試驗.熱沖擊 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2006); German version EN 61300-2-47:2007 |
| DIN EN 61300-2-48-2003 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-48部分:試驗.溫度-濕度循環 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests; Temperature-humidity cycling (IEC 61300-2-48:2003); German version EN 61300-2-48:2003 |
| DIN EN 61300-3-10-2007 | 纖維光學互聯裝置和無源部件.基本試驗和測量程序.第3-10部分:檢驗和測量.量規的保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force (IEC 61300-3-10:2006); German version EN 61300-3-10:2007 |
| DIN EN 61300-3-14-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.第3-14部分:檢驗和測量.可變衰減器衰減設置的精確性和重復 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator (IEC 61300-3-14:2006); German version EN 61300-3-14:2007 |
| DIN EN 61300-3-15-2007 | 纖維光學互連裝置和無源元件.基本試驗和測量程序.第3-15部分:檢驗和測量.凸形拋光金屬環端面圓頂偏心率(IEC | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface (IEC 61300-3-15:2006); German version EN 61300-3-15:2007 |
| DIN EN 61300-3-17-2000 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-17部分:檢查和測量.角度拋光套圈的端面角 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements; endface angle of angle-polished ferrules (IEC 61300-3-17:1999); German version EN 61300-3-17:1999 |
| DIN EN 61300-3-2-2000 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-2部分:檢查和測量.單模纖維光學器件衰減偏振函數 | Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 3-2: Examinations and measurements; polarization dependence of attenuation in a single-mode fibre optic device (IEC 61300-3-2:1999); German version EN 61300-3-2:1999 |
| DIN EN 61300-3-20-2002 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-20部分:檢查和測量.光纖分路設備的指向性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices (IEC 61300-3-20:2001); German version EN 61300-3-20:2001 |
| DIN EN 61300-3-23-1999 | 光纖互聯裝置和無源部件.基本試驗和測量程序.第2-23部分:檢驗和測量.相對于金屬端面的纖維位置 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface (IEC 61300-3-23:1998); German version EN 61300-3-23:1998 |
| DIN EN 61300-3-24-2007 | 纖維光學互聯裝置和無源部件.基本試驗和測量程序.第3-24部分:檢驗和測量.極性維護光纖用光學連接器關鍵精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre (IEC 61300-3-24:2006); German version EN 61300-3-24:2007 |
| DIN EN 61300-3-29-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-29部分:檢查和測量.表征DWDM元件的光譜傳輸功能振幅的 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (IEC 61300-3-29:2005); German version EN 61300-3-29:2006 |
| DIN EN 61300-3-3-2003 | 纖維光學互連裝置和無源元件.基本試驗和測量步驟.第3-3部分:檢驗和測量.衰減和回波損耗中變化的動態監控 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements; Active monitoring of changes in attenuation and return loss (IEC 61300-3-3:2003); German version EN 61300-3-3:2003 |
| DIN EN 61300-3-31-2003 | 光纖互連裝置和無源部件.基本試驗和測量程序.第3-31部分:檢驗和測量.纖維光學源的耦合功率比測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources (IEC 61300-3-31:2003); German version EN 61300-3-31:2003 |
| DIN EN 61300-3-33-2000 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-33部分:套管拔出力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements; ferrule withdrawal force (IEC 61300-3-33:1999); German version EN 61300-3-33:1999 |
| DIN EN 61300-3-37-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-37部分:檢查和測量.光學纖維角度拋光端面的曲率角度(I | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres (IEC 61300-3-37:2005); German version EN 61300-3-37:2005 |
| DIN EN 61300-3-40-1998 | 光纖互聯裝置和無源元件.基本試驗和測量程序.第3-40部分:檢驗和測量.帶極化保持(PM)纖維引線的連接器的衰減 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements; Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector (IEC 61300-3-40:1998); German version EN 61300-3-40:1998 |
| DIN EN 61300-3-6-2003 | 纖維光學互連裝置和無源元件.基本試驗和測量步驟.第3-6部分:檢驗和測量.回波損耗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements; Return loss (IEC 61300-3-6:2003); German version EN 61300-3-6:2003 |
| DIN EN 61753-022-2-2003 | 光纖互連裝置和無源部件性能標準.第022-2部分:C類多模纖維與光纖連接器的端接.受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 022-2: Fibre optic connectors terminates on multimode fibre for category C - Controlled environment (IEC 61753-022-2:2003); German version EN 61753-022-2:2003 |
| DIN EN 61753-051-3-2002 | 光纖互連裝置和無源部件性能標準.第051-3部分:U類非受控環境用插銷固定式衰減器單模纖維 (IEC 61753-051-3: | Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U; Uncontrolled environment (IEC 61753-051-3:2001); German version EN 61753-051-3:2002 |
| DIN EN 61753-052-3-2002 | 光纖互連裝置和無源部件性能標準.第052-3部分:U類非受控環境用辮子管固定式衰減器單模纖維 (IEC 61753-052- | Fibre optic interconnecting devices and passive components performance standard - Part 052-3: Single-mode fibre, pigtailed-style fixed attenuators for category U; Uncontrolled environment (IEC 61753-052-3:2001); German version EN 61753-052-3:2002 |
| DIN EN 61753-053-3-2004 | 纖維光學互連器件和無源元件性能標準.第053-3部分:U類連續可變衰減器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment (IEC 61753-053-3:2004); German version EN 61753-053-3:2004 |
| DIN EN 61753-061-3-2005 | 纖維光學互連器件和無源元件性能標準.第061-3部分:U類單模纖維光學有抽頭的隔離器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment (IEC 61753-061-3:2004); German version EN 61753-061-3:2004 |
| DIN EN 61753-091-3-2005 | 纖維光學互連器件和無源元件性能標準.第091-3部分:U類單模纖維光學有抽頭的循環器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment (IEC 61753-091-3:2004); German version EN 61753-091-3:2004 |
| DIN EN 61753-101-2-2007 | 纖維光學互連器件和無源元件性能標準.第101-2部分:C類光纖管理系統.受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for category C - Controlled environment (IEC 61753-101-2:2006); German version EN 61753-101-2:2006 |
| DIN EN 61753-2-1-2001 | 光纖互連裝置和無源部件性能標準.第2-1部分:端接于U級單模纖維的光纖連接器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U; Uncontrolled environment (IEC 61753-2-1:2000); German version EN 61753-2-2-1:2000 |
| DIN EN 61753-2-3-2002 | 纖維光學互連器件和無源元件性能標準.第2-3部分:U類非連接單模1濶 和 2濶非可選波長分路器件.非控制環境 | Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single-mode 1×N and 2×N non-wavelength-selective branching devices for category U; Uncontrolled environment (IEC 61753-2-3:2001); German version EN 61753-2-3:2001 |
| DIN EN 61754-12-2000 | 纖維光學連接器接口.第12部分:FS型連接器門類 | Fibre optic connector interfaces - Part 12: Type FS connector family (IEC 61754-12:1999); German version EN 61754-12:1999 |
| DIN EN 61754-13-2006 | 纖維光學連接器接口.第13部分:FC-PC型連接器門(IEC 61754-13-2006) | Fibre optic connector interfaces - Part 13: Type FC-PC connector (IEC 61754-13:2006); German version EN 61754-13:2006 |
| DIN EN 61754-16-2000 | 纖維光學連接器接口.第16部分:PN型連接器門類 | Fibre optic connector interfaces - Part 16: Type PN connector family (IEC 61754-16:1999); German version EN 61754-16:2000 |
| DIN EN 61754-21-2005 | 纖維光學連接器接口.第21部分:塑料光纖用SMI型連接器門類 | Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre (IEC 61754-21:2005); German version EN 61754-21:2005 |
| DIN EN 61754-22-2006 | 纖維光學連接器接口.第22部分:F-SMA型連接器門類 | Fibre optic connector interfaces - Part 22: Type F-SMA connector family (IEC 61754-22:2005); German version EN 61754-22:2005 |
| DIN EN 61754-23-2006 | 纖維光學連接器接口.第23部分:LX.5型連接器門類 | Fibre optic connector interfaces - Part 23: Type LX.5 connector family (IEC 61754-23:2005); German version EN 61754-23:2005 |
| DIN EN 61754-4-1-2003 | 纖維光學連接器接口.第4-1部分:SC型連接器系列.簡化的SC-PC型連接器插座接口 | Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptacle SC-PC connector interfaces (IEC 61754-4-1:2003); German version EN 61754-4-1:2003 |
| DIN EN 61754-6-2005 | 纖維光學連接器接口.第6部分:MU型連接器類 | Fibre optic connector interfaces - Part 6: Type MU connector family (IEC 61754-6:1997 + A1:2001 + A2:2004); German version EN 61754-6:1997 + A1:2001 + A2:2005 |
| DIN EN 61754-7-2005 | 纖維光學連接器接口.第7部分:MPO型連接器類 | Fibre optic connector interfaces - Part 7: Type MPO connector family (IEC 61754-7:2004); German version EN 61754-7:2005 |
| DIN EN 61755-1-2006 | 纖維光學連接器的接口.第1部分:單一模式非散射移位纖維的光學接口.總則和指南(IEC 61755-1:2005) | Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance (IEC 61755-1:2005); German version EN 61755-1:2006 |
| DIN EN 61755-2-1-2007 | 纖維光學連接器光學接口.第2-1部分:單模非物理角接觸光纖標準光學接口 | Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres (IEC 61755-2-1:2006); German version EN 61755-2-1:2006 |
| DIN EN 61755-2-2-2007 | 纖維光學連接器光學接口.第2-2部分:標準單模成角物理接觸光纖用光學接口 | Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres (IEC 61755-2-2:2006); German version EN 61755-2-2:2006 |
| DIN EN 61755-3-5-2007 | 纖維光學連接器光學接口.第3-5部分:光學接口.單模光纖用直徑為2.5mm和1.25mm、銅-鎳合金包覆光纖材料的圓柱 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-5:2006); German version EN 61755-3-5:2006 |
| DIN EN 61755-3-6-2007 | 纖維光學連接器的光學接口.第3-6部分:光學接口.使用銅-鎳合金作為單模纖維光纖接口材料用的直徑2.5mm和1.25 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006); German version EN 61755-3-6:2006 |
| DIN EN 61756-1-2007 | 光纖互連設備和無源元器件.纖維管理系統的接口標準.第1部分:總則和指南 | Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance (IEC 61756-1:2006); German version EN 61756-1:2006 |
| DIN EN 61757-1-1999 | 纖維光學傳感器.第1部分:總規范(IEC 61757-1-1998) | Fibre optic sensors - Part 1: Generic specification (IEC 61757-1:1998); German version EN 61757-1:1999 |
| DIN EN 62005-7-2004 | 纖維光學互連器件和無源光學元件的可靠性.第7部分:壽命應力模型 | Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling (IEC 62005-7:2004); German version EN 62005-7:2004 |
| DIN EN 62148-11-2004 | 纖維光學有源元件及器件.包裝和接口標準.第14部分:14針集成調制器激光二極管發射器 | Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003); German version EN 62148-11:2003 |
| DIN EN 62148-4-2004 | 纖維光學有源元件及器件.包裝和接口標準.第4部分:PN 1x9塑料光纖無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers (IEC 62148-4:2003); German version EN 62148-4:2003 |
| DIN EN 62148-6-2004 | 纖維光學有源元件及器件.包裝和接口標準.第6部分:ATM-PON無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers (IEC 62148-6:2003); German version EN 62148-6:2003 |
| DIN EN 62148-7-2003 | 纖維光學有源元件及器件.包裝和接口標準.第7部分:SFF LC 10針無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers (IEC 62148-7:2003); German version EN 62148-7:2003 |
| DIN EN 62149-1-2004 | 纖維光學有源元件和器件.性能標準.第1部分:總則和指南 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance (IEC 62149-1:2004 + Corrigendum 2004); German version EN 62149-1:2004 |
| DIN EN 62149-3-2004 | 纖維光學有源元件和器件.性能標準.第3部分:2.5Gbit/s調制器-集成激光二極管發射機 | Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters (IEC 62149-3:2004); German version EN 62149-3:2004 |
| DIN EN 62149-4-2003 | 光纖有源元件及器件.性能標準.第4部分:千兆比特以太網用1300nm纖維光學無線電收發信機 | Fibre optic active components and devices - Performance standards - Part 4: 1300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2003 + Corrigendum 2003); German version EN 62149-4:2003 |
| DIN EN 62149-5-2004 | 纖維光學有源元件及器件.性能標準.第5部分:帶LD驅動和CDR IC的ATM-PON無線電收發信機 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs (IEC 62149-5:2003); German version EN 62149-5:2003 |
| DIN EN 62149-6-2004 | 纖維光學有源元件及器件.性能標準.第6部分:650-nm 250-Mbit/s塑料光纖無線電收發信機 | Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers (IEC 62149-6:2003); German version EN 62149-6:2003 |
| DIN EN 62150-1-2005 | 纖維光學有源元件和器件.試驗和測量規程.第1部分:總則和指南(IEC 62150-1-2005)；德文版本 EN 62150-1-2005 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance (IEC 62150-1:2005); German version EN 62150-1:2005 |
| DIN EN 62150-2-2005 | 纖維光學有源元件和器件.試驗和測量規程.第2部分:ATM-POM無線電收發信機 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers (IEC 62150-2:2004); German version EN 62150-2:2004 |
| DIN EN 622-1-2003 | 纖維板.規范.第1部分:一般要求 | Fibreboards - Specifications - Part 1: General requirements; German version EN 622-1:2003 |
| DIN EN 622-2 Berichtigung 1-2006 | 纖維板.規范.第2部分:硬質纖維板的一般要求.德文版本EN 622-2-2004對DIN EN 622-2-2004的勘誤; | Fibreboards - Specifications - Part 2: Requirements for hardboards - German version EN 622-2:2004, Corrigenda to DIN EN 622-2:2004-07; German version EN 622-2:2004/AC:2005 |
| DIN EN 622-2-2004 | 纖維板.規范.第2部分:硬質纖維板的要求 | Fibreboards - Specifications - Part 2: Requirements for hardboards; German version EN 622-2:2004 |
| DIN EN 622-3-2004 | 纖維板.規范.第3部分:中硬度板的要求 | Fibreboards - Specifications - Part 3: Requirements for medium boards; German version EN 622-3:2004 |
| DIN EN 622-4-1997 | 纖維板.規范.第4部分:多孔板要求 | Fibreboards - Specifications - Part 4: Requirements for softboards; German version EN 622-4:1997 |
| DIN EN 622-5-2006 | 纖維板.規范.第5部分:干燥處理要求(MDF) | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) English version of DIN EN 622-5:2006-09 |
| DIN EN 637-1994 | 塑料管道系統.玻璃纖維增強塑料部件.用重力測量法對成分含量的測定; 德文版本 EN 637:1994 | Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994 |
| DIN EN 705-1994 | 塑料管道系統.玻璃纖維增強熱固塑料管和管件.回歸分析和應用方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994 |
| DIN EN 872-2005 | 水質.懸浮固體的測量.玻璃纖維過濾器的過濾方法 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters; German version EN 872:2005 |
| DIN EN ISO 10306-1995 | 紡織品.棉纖維。成熟度的氣流法評定 | Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO 10306:1993); German version EN ISO 10306:1995 |
| DIN EN ISO 10350-2-2001 | 塑料.可比單點數據的采集和表示.第2部分:長纖維增強塑料 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001); German version EN ISO 10350-2:2001 |
| DIN EN ISO 10352-1997 | 纖維增強塑料.模制化合物和聚酯膠片.單位面積質量測定 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:1997); German version EN ISO 10352:1997 |
| DIN EN ISO 105-X13-1997 | 紡織品.色牢度試驗.第X13部分:棉纖維物化學處理產生的折縫、打褶和定型工藝的色牢度 | Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994); German version EN ISO 105-X13:1997 |
| DIN EN ISO 105-Z03-1998 | 紡織品.色牢度試驗.第Z03部分:聚丙烯腈纖維用基本染料的互溶性 | Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres (ISO 105-Z03:1996); German version EN ISO 105-Z03:1998 |
| DIN EN ISO 10548-2003 | 碳纖維.尺寸的測定 | Carbon fibre - Determination of size content (ISO 10548:2002); German version EN ISO 10548:2003 |
| DIN EN ISO 1061-2000 | 塑料.不增塑的乙酸纖維素.游離酸度的測定 | Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990); German version EN ISO 1061:1999 |
| DIN EN ISO 10618-2004 | 碳纖維.樹脂浸漬紗拉伸性能的測定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004); German version EN ISO 10618:2004 |
| DIN EN ISO 1140-2005 | 纖維繩索.聚酰胺.3、4和8股絞繩 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes (ISO 1140:2004); German version EN ISO 1140:2004 |
| DIN EN ISO 1141-2005 | 纖維繩索.聚酯.3、4和8股絞繩 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes (ISO 1141:2004); German version EN ISO 1141:2004 |
| DIN EN ISO 11667-1999 | 纖維增強塑料.模塑化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量的測定.溶解方法 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999 |
| DIN EN ISO 1172-1998 | 紡織玻璃纖維增強塑料.預浸料坯,模塑化合物及疊層板材.紡織玻璃纖維和礦物填充料含量的測定.煅燒法 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998 |
| DIN EN ISO 11721-1-2001 | 織物.含纖維素織物耐微生物性測定.土埋試驗.第1部分:腐爛延遲評定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001); German version EN ISO 11721-1:2001 |
| DIN EN ISO 11721-2-2003 | 紡織品.纖維素紡織品抗菌性的測定.土埋試驗.第1部分:防腐處理長期性鑒定 | Textiles - Determination of the resistance of cellulose containing textiles to microorganisms; Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish (ISO 11721-2:2003); German version EN ISO 11721-2:2003 |
| DIN EN ISO 1181-2005 | 纖維繩索.馬尼拉麻和西沙爾麻繩索.3、4和8股繩 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes (ISO 1181:2004); German version EN ISO 1181:2004 |
| DIN EN ISO 12114-1997 | 纖維增強塑料.熱固性模塑化合物和聚酯膠片.固化特性測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997 |
| DIN EN ISO 12115-1997 | 纖維增強塑料.熱固性模塑化合物和聚酯膠片.流動性、熟化和使用壽命測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997 |
| DIN EN ISO 12215-1-2001 | 小型船舶.船體建造和草圖.第1部分:材料.玻璃纖維增強熱固樹脂標準層壓板 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000 |
| DIN EN ISO 13002-1999 | 碳纖維.長絲紗的命名體系 | Carbon fibre - Designation system for filament yarns (ISO 13002:1998); German version EN ISO 13002:1998 |
| DIN EN ISO 1346-2005 | 纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3)繩索.3、4和8股繩索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes (ISO 1346:2004); German version EN ISO 1346:2004 |
| DIN EN ISO 14125-1998 | 纖維增強塑料.彎曲性能測定 | Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998); German version EN ISO 14125:1998 |
| DIN EN ISO 14126-2000 | 纖維增強塑料混合物.水平方向壓縮能力的測定 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999 |
| DIN EN ISO 14129-1998 | 纖維增強塑料符合材料.用45角度拉伸試驗方法測定平面內剪切應力/剪切應變響應關系，包括平面內剪切模數/強 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ? 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997 |
| DIN EN ISO 14130-1998 | 纖維增強塑料符合材料.用短梁法測定表面層間剪切強度 | Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997 |
| DIN EN ISO 14692-1-2005 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第1部分:詞匯、符號、應用和材料 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002 |
| DIN EN ISO 14692-2 Berichtigung 1-2007 | 石油和天然氣工業.玻璃纖維增強塑料.第2部分:生產資格 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006 |
| DIN EN ISO 14692-2-2005 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第2部分:合格鑒定和制造 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002 |
| DIN EN ISO 14692-3 Berichtigung 1-2007 | 石油和天然氣工業.玻璃纖維增強塑料管.第3部分:系統管道 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006 |
| DIN EN ISO 14692-3-2005 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第3部分:系統設計 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002 |
| DIN EN ISO 14692-4-2005 | 石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第4部分:制造、安裝和操作 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002 |
| DIN EN ISO 15310-2005 | 纖維增強塑料復合材料.用板捻法測定內剪模量 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999); German version EN ISO 15310:2005 |
| DIN EN ISO 1598-1999 | 塑料.乙酸纖維素.不可溶解成份的測定(ISO 1598-1999) | Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999 |
| DIN EN ISO 1599-2000 | 塑料.乙酸纖維素.模塑時粘度降低的測定 | Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999 |
| DIN EN ISO 1600-2000 | 塑料.乙酸纖維素.利用加熱的不同周期在模制樣品生產中的光吸收量的測定 | Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999 |
| DIN EN ISO 16000-7-2007 | 室內空氣.第7部分:空氣中石棉纖維濃度測定用取樣策略 | Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007); German version EN ISO 16000-7:2007 |
| DIN EN ISO 16472-2006 | 動物飼料.精制淀粉酶中性清潔劑纖維(aNDF)含量的測定(ISO 16472:2006) | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) (ISO 16472:2006) English version of DIN EN ISO 16472:2006-07 |
| DIN EN ISO 1968-2005 | 纖維繩索和繩索制品.詞匯 | Fibre ropes and cordage - Vocabulary (ISO 1968:2004); Trilingual version EN ISO 1968:2004 |
| DIN EN ISO 1969-2005 | 纖維繩索.聚乙烯繩索.3和4股繩索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO 1969:2004); German version EN ISO 1969:2004 |
| DIN EN ISO 2078-1994 | 紡織玻璃纖維.紗線.標識 (ISO 2078:1993); 德文版本 EN ISO 2078:1994 | Textile glass - Yarns - Designation (ISO 2078:1993); German version EN ISO 2078:1994 |
| DIN EN ISO 2307-2005 | 纖維繩索.特定物理和機械性能測定 | Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2005); German version EN ISO 2307:2005 |
| DIN EN ISO 2398-1997 | 壓縮空氣用紡織纖維增強橡膠軟管.規范 | Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995); German version EN ISO 2398:1997 |
| DIN EN ISO 3037-2007 | 波紋纖維板.邊緣耐壓碎性的測定(邊緣不涂蠟法) | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2007); German version EN ISO 3037:2007 |
| DIN EN ISO 5079-1996 | 紡織品.纖維.單纖維斷裂強力和伸長率測定 | Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979); German version EN ISO 5079:1995 |
| DIN EN ISO 527-4-1997 | 塑料.拉伸性能測定.第4部分:均質和非均質增強纖維塑料復合材料試驗條件 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997 |
| DIN EN ISO 527-5-1997 | 塑料.抗拉性能的測定.第5部分:單向增強纖維塑料復合材料試驗條件 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997); German version EN ISO 527-5:1997 |
| DIN EN ISO 585-2000 | 塑料.不增塑的乙酸纖維素.含水量的測定 | Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999 |
| DIN EN ISO 6865-2001 | 動物飼料.粗纖維含量的測定.中級過濾法 | Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000); German version EN ISO 6865:2000 |
| DIN EN ISO 6888-2-2003 | 食品和動物飼料的微生物學.凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法.第2部分:兔血漿纖維 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium (ISO 6888-2:1999 + AMD 1:2003); German version EN ISO 6888-2:1999 + A1:2003 |
| DIN EN ISO 75-3-2004 | 塑料.載荷下?lián)锨鷾囟鹊臏y(cè)定.第3部分:高強度熱固性疊層板和長纖維增強塑料 | Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004 |
| DIN EN ISO 7822-2000 | 玻璃纖維增強塑料.孔隙率的測定.燒失量、機械粉碎和靜態計數法 | Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999 |
| DIN EN ISO 9163-2005 | 紡織玻璃纖維.粗紗.試樣的制備和浸漬粗紗拉伸強度的測定 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| DIN EN ISO 9237-1995 | 紡織品.纖維織物透氣性測定 | Textiles - Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 |
| DIN EN ISO 9554-2005 | 纖維繩索.一般規范 | Fibre ropes - General specifications (ISO 9554:2005); German version EN ISO 9554:2005 |
| DIN ISO 14446-2002 | 涂料和清漆的粘合劑.工業纖維素硝酸鹽溶液粘度測定和此類溶液的分類 (ISO 14446:1999) | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| DIN ISO 15636-2004 | 硫化纖維磨料盤用背襯墊 | Back-up pads for vulcanized fibre discs (ISO 15636:2003) |
| DIN ISO 16057-2003 | 砂布.硫化纖維砂輪 | Coated abrasives - Vulcanized-fibre discs (ISO 16057:2002) |
| DIN ISO 1887-1984 | 紡織玻璃纖維.可燃物含量的測定 | Textile glass; determination of combustible matter content |
| DIN ISO 2076-2001 | 紡織品.人造纖維.屬名 | Textiles - Man-made fibres - Generic names (identical with ISO 2076:1999) |
| DIN ISO 3039-1993 | 瓦楞纖維板.分離后組成原紙定量的測定 | Corrugated fibreboard; determination of the grammage of the component papers after separation; identical with ISO 3039:1975 |
| DIN ISO 3060-1994 | 棉纖維.平列纖維束斷裂韌性的測定 | Cotton fibres; determination of breaking tenacity of flat bundles (ISO 3060:1974) |
| DIN ISO 3451-3-1991 | 塑料.灰分的測定.第3部分:未增塑的醋酸纖維素; 等同采用 ISO 3451-3:1984 | Plastics; determination of ash; unplasticized cellulose acetate; identical with ISO 3451-3:1984 |
| DIN ISO 7884-3-1998 | 玻璃.粘度和粘度固定點.第3部分:纖維伸長粘度計測定粘度 | Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987) |
| DIN ISO 8115-2-1997 | 大包.第2部分:人造棉纖維包.尺寸 | Bales - Part 2: Bales of man-made staple fibres - Dimensions (ISO 8115-2:1994) |
| DIN V 1201-2004 | 排水和污水用未加筋的、鋼纖維的和加筋的混凝土管和配件.1型和2型.要求、試驗方法和合格評定 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity |
| DIN V 4034-1-2004 | 排水和污水用未加筋的、鋼纖維和加筋的預制混凝土人孔.1型和2型.第1部分:要求、試驗方法和合格評定 | Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity |
| DIN V 65352 Bb.1-1987 | 航空航天.纖維復合物的合格鑒定和驗收試驗結果的統計評價方法.計算實例 | Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites; example of calculation |
| DIN V 65352-1987 | 航空航天.纖維復合物的合格鑒定和驗收試驗結果的統計評價方法 | Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites |
| DIN V 65380-1987 | 航空航天.纖維加筋塑料.單向疊層板材的試驗.與纖維方向平行和橫切的壓縮試驗 | Aerospace; fiber-reinforced plastics; testing of unidirectional laminates; compression test, parallel and transverse to fiber direction |
| DIN V 65579-1991 | 航空航天.碳纖維.化學分析.類金屬元素的測定 | Aerospace; carbon fibres; chemical analysis; determination of the metalloid elements |
| DIN V ENV 1007-6-2002 | 高技術陶瓷.陶瓷成分.增強材料的試驗方法.第6部分:高溫測定纖維的抗拉性能; 德文版本 ENV 1007-6:2002 | Advanced technical ceramics - Ceramic composites; Methods of test for reinforcements - Part 6: Determination of tensile properties of filament at high temperature; German version ENV 1007-6:2002 |
| DIN V ENV 1094-7-1994 | 絕緣耐火制品.第7部分:陶瓷纖維制品的試驗方法; 德文版本 ENV 1094-7:1993 | Insulating refractory products; part 7: methods of test for ceramic fibre products; German version ENV 1094-7:1993 |
| DIN V ENV 1170-8-1996 | 玻璃纖維混凝土試驗方法.第8部分:氣侯循環試驗 | Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version prENV 1170-8:1996 |
| DIN VDE 0311-10-1988 | 電工用纖維素絕緣紙.定義和一般要求 | Cellulosic paper for electrical purposes; definitions and general requirements; identical with IEC 60554-1:1977 (status 1983) |
| DIN VDE 0311-31-1988 | 電工用纖維素絕緣紙.規范.普通電工紙 | Cellulosic paper for electrical purposes; specifications; general purpose electrical papers; identical with IEC 60554-3-1:1979 |
| DIN VDE 0311-32-1988 | 電工用纖維素絕緣紙.規范.電容器紙 | Cellulosic paper for electrical purposes; specifications; capacitor papers; identical with IEC 60554-3-2:1983 |
| DIN VDE 0311-33-1988 | 電工用纖維素紙.規范.縐紋紙 | Cellulosic paper for electrical purposes; specifications; cr?pe papers; identical with IEC 60554-3-3:1980 |
| DIN VDE 0311-34-1988 | 電工用纖維素絕緣紙規范.電解電容器紙 | Cellulosic paper for electrical purposes; specifications; electrolytic capacitor papers; identical with IEC 60554-3-4:1979 |
| DIN VDE 0311-35-1988 | 電工用纖維素絕緣紙.規范.專用紙 | Cellulosic paper for electrical purposes; specifications; special paper; IEC 60554-3-5:1984, modified |
| DIN VDE 0312-1959 | 層壓材料試驗規則.電氣工程用硫化纖維材料 | Rules for testing methods for laminates; vulcanized fibres for electrical engineering |
| DIN VDE 0334-1-1972 | 電工用織物玻璃纖維制品規范.第1部分:織物玻璃纖維織品 | Regulations for textile glass products in electrical engineering; part 1: Textile glass fabrics |
| DIN VDE 0365-1-1967 | 電工用清漆纖維素材料規定.第1部分:漆紙 | Regulations for varnished fibrous materials for electrical engineering; part 1: Varnished papers |
| DIN VDE 0365-2-1967 | 電工用清漆纖維素材料規定.第2部分:漆布 | Regulations for varnished fibrous materials for electrical engineering; part 2: Varnished fabrics |
| DIN VDE 0365-3-1967 | 電工用清漆纖維素材料規定.第3部分:玻璃纖維漆布 | Regulations for varnished fibrous materials for electrical engineering; part 3: Varnished glass fabrics |
| DIN VDE 0441-2-1982 | 標稱電壓在1KV以上的系統用有機材料制成的絕緣子的試驗.帶玻璃纖維芯子的戶外復合材料絕緣子的試驗 | Tests on insulators of organic material for systems with nominal voltages greater than 1 kV; tests on outdoor composite insulators with fibre glass core VDE Guide |
| DIN VDE 0888-4-1999 | 通信系統光纖電纜.第4部分:室內用單纖維電纜 | Optical fibre cables for communication systems - Part 4: Indoor cables with one fibre |
| 編號 | 中文名稱 | 英文名稱 |