| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A03-720-2-2002 | 混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維 | (Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.) |
| NF A09-360-1985 | 無損檢驗.超聲波.音頻傳播.模板纖維制的構件和材料的檢查 | (NON DESTRUCTIVE TESTING. ACOUSTIC EMISSION. EXAMINATION OF COMPOSITE MATERIAL PARTS AND STRUCTURES. MATRIX FIBERS.) |
| NF B20-001-1988 | 礦物纖維絕緣產品.詞匯 | (Mineral fiber based insulating products. Vocabulary.) |
| NF B20-002-1983 | 礦物纖維絕緣產品.取樣要求 | (MINERAL FIBER BASED INSULATION PRODUCTS. SAMPLING REQUIREMENTS.) |
| NF B20-101-1983 | 礦物纖維絕緣產品.礦氈、墊子和礦棉板.厚度的常規測量 | (MINERAL FIBRE BASED INSULATING PRODUCTS. MINERAL WOOLFELTS,MATTRESSES AND PANELS. CONVENTIONAL MEASURE OF THICKNESS.) |
| NF B20-104-1985 | 礦物纖維絕緣產品.礦氈、墊子和礦棉板.透氣性的測定 | (MINERAL BASED INSULATING PRODUCTS. MINERAL WOOLFELTS,MATTRESSES AND PANELS. DETERMINATION OF AIR PERMEABILITY.) |
| NF B20-105-1984 | 礦物纖維絕緣墊子和礦棉板表面密度的測定方法 | (METHOD OF DETERMINING THE SURFACE MASS OF MINERAL FIBRE INSULATION MATS AND PANELS.) |
| NF B20-106-1984 | 礦物纖維絕緣產品.粘聚力測定用等速垂直牽引時產品表面的擴展試驗 | (MINERAL FIBER BASED INSULATED PRODUCTS. EXTENSION TEST PERPENDICULARY TO THE SURFACES OF THE PRODUCTS AT CONSTANT VELOCITY TO DETERMINE THE COHESION.) |
| NF B20-109-1985 | 礦物纖維絕緣產品.礦氈、墊子和礦棉板.分類 | (MINERAL BASED INSULATING PRODUCTS. MINERAL WOOLFELTS,MATTRESSES AND PANELS. CLASSIFICATION.) |
| NF B38-001-1989 | 紡織玻璃纖維.詞匯 | (Textile glass. Vocabulary.) |
| NF B38-101-1996 | 紡織玻璃纖維.熔化物質含量的測定 | (Textiles glass. Determination of combustible-matter content.) |
| NF B38-102-1996 | 紡織玻璃纖維.短纖維或長纖維.平均直徑的測定 | (Textile glass. Staple fibres or filaments. Determination of average diameter.) |
| NF B38-106-1995 | 紡織玻璃纖維.紗線.名稱 | (Textile glass. Yarns. Designation.) |
| NF B38-107-1986 | 紡織玻璃纖維.紗線.規范基礎 | (Textile glass. Yarns. Basis for a specification.) |
| NF B38-109-2003 | 紡織玻璃纖維.紗線.捻度平衡指數的測定 | (Textile glass - Yarns - Determination of twist balance index.) |
| NF B38-110-2002 | 紡織玻璃纖維.紗線.斷裂力和斷裂伸長的測定 | (Textile glass - Yarns - Determination of breaking force and breaking elongation.) |
| NF B38-116-1-1999 | 紡織玻璃纖維.紗線.第1部分:名稱與符號 | (TEXTILE GLASS. YARNS. PART 1 : DESIGNATION. (EUROPEAN STANDARD EN 12654-1).) |
| NF B38-116-2-1999 | 紡織玻璃纖維.紗線.第2部分:試驗方法和總規范 | (TEXTILE GLASS. YARNS. PART 2 : METHODS OF TEST AND GENERAL SPECIFICATIONS. (EUROPEAN STANDARD EN 12654-2).) |
| NF B38-116-3-1999 | 紡織玻璃纖維.紗線.第3部分:一般用途的總要求 | (TEXTILE GLASS. YARNS. PART 3 : GENERAL REQUIREMENTS FOR GENERAL APPLICATIONS. (EUROPEAN STANDARD EN 12654-3).) |
| NF B38-151-1986 | 紡織玻璃纖維.粗紗.規范基礎 | (Textile glass. Rovings. Basis for a specification.) |
| NF B38-152-1983 | 玻璃纖維.粗紗剛度的測定 | (Textile glass. Determination of stiffness of rovings.) |
| NF B38-160-1-2003 | 增強材料.玻璃纖維粗紗規范.第1部分:命名 | (Reinforcements - Specification for textile glass rovings - Part 1 : designation.) |
| NF B38-160-2-2003 | 增強材料.玻璃纖維粗紗規范.第2部分:試驗方法和一般要求 | (Reinforcements - Specification for textile glass rovings - Part 2 : methods of test and general requirements.) |
| NF B38-160-3-2003 | 增強材料.玻璃纖維粗紗規范.第3部分:特殊要求 | (Reinforcements - Specification for textile glass rovings - Part 3 : specific requirements.) |
| NF B38-203-1996 | 紡織玻璃纖維.織物.用條法測定斷裂張力和斷裂伸長 | (Textile glass. Woven fabric. Determination of tensile breaking force and elongation at break by the strip method.) |
| NF B38-206-1980 | 紡織玻璃纖維.紡織物.用彎曲法進行一般硬度的測定.用固定角度彎曲計進行測定方法 | (TEXTILES GLASS. WOVEN FABRICS. DETERMINATION OF CONVENTIONAL FLEXURAL STIFNESS. FIXED ANGLE FLEXOMETER METHOD.) |
| NF B38-207-1996 | 紡織玻璃纖維.機織織物.厚度的測定 | (TEXTILE GLASS. WOVEN FABRICS. DETERMINATION OF THICKNESS.) |
| NF B38-301-2001 | 紡織玻璃纖維.墊子(裁截或連續的多股線制).名稱與符號和基本規范 | (Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications.) |
| NF B38-302-1983 | 紡織玻璃纖維.增強塑料用的短絲玻璃纖維.粘合劑吞苯乙烯中溶解時間的測定 | (Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene.) |
| NF B38-305-1996 | 紡織玻璃纖維.織毯.抗張斷裂力測定 | (Textile glass. Mats. Determination of tensile breaking force.) |
| NF B38-307-1-2003 | 增強材料.紡織玻璃纖維氈片(切短玻璃絲氈片和連續長絲氈片).第1部分: 標識 | (Reinforcements - Specification for textile glass mats (chopped strand and continuous filaments mats) - Part 1 : designation.) |
| NF B38-307-2-2003 | 增強材料.紡織玻璃纖維氈片(切短玻璃絲和連續長絲氈片)規范.第2部分:試驗方法和一般要求 | (Reinforcements - Specification for textile glass mats (chopped strand and continuous filament mats) - Part 2 : methods of test and general requirements.) |
| NF B38-307-3-2003 | 增強材料.紡織玻璃纖維氈片(切短玻璃絲和連續長絲氈片)規范.第3部分:特殊要求 | (Reinforcements - Specification for textile glass mats (chopped strand and continuous filament mats) - Part 3 : specific requirements.) |
| NF B38-401-1988 | 紡織玻璃纖維.變形紗線.規范的基礎 | (TEXTILE GLASS. TEXTURED YARNS. BASIS FOR A SPECIFICATION.) |
| NF B38-510-1-1999 | 增強材料.紡織玻璃纖維短切原絲規范.第1部分:名稱與符號 | (REINFORCEMENTS. SPECIFICATION FOR TEXTILE GLASS CHOPPED STRANDS. PART 1 : DESIGNATION. (EUROPEAN STANDARD EN 12971-1).) |
| NF B38-510-2-1999 | 增強材料.紡織玻璃纖維短切原絲規范.第2部分:試驗方法與一般要求 | (REINFORCEMENTS. SPECIFICATION FOR TEXTILE GLASS CHOPPED STRANDS. PART 2 : TEST METHODS AND GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 12971-2).) |
| NF B38-510-3-1999 | 增強材料.紡織玻璃纖維短切原絲規范.第3部分:特殊要求 | (REINFORCEMENTS. SPECIFICATION FOR TEXTILE GLASS CHOPPED STRANDS. PART 3 : SPECIFIC REQUIREMENTS. (EUROPEAN STANDARD EN 12971-3).) |
| NF B40-010-1997 | 耐火制品.第1部分:陶瓷纖維制品的術語(歐洲標準EN 1094-1) | (INSULATING REFRACTORY PRODUCTS. PART 1 : TERMINOLOGY FOR CERAMIC FIBRE PRODUCTS. (EUROPEAN STANDARD EN 1094-1).) |
| NF B51-010-1942 | 木材.與纖維垂直的拉力試驗 | (WOOD. TENSILE TEST PERPENDICULAR TO FIBRES.) |
| NF B51-017-1988 | 木材.纖維的縱向拉伸.無缺陷木材細木條的小試樣縱向拉伸抗斷裂強度的測定 | (Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.) |
| NF B51-018-1988 | 木材.纖維的縱向拉伸.無缺陷木材細木條的小試樣縱向拉伸彈性模量的測定 | (WOOD. TENSILE PARALLEL TO GRAIN. DETERMINATION OF MODULUS OF ELASTICITY IN TENSILE PARALLEL TO GRAIN USING SMALL CLEAR SPECIMENS.) |
| NF B51-078-1-2001 | 木基板.結構設計的特性閥門.第1部分:OSB.顆粒板和纖維板 | (Wood-based panels - Characteristic values for structural design - Part 1 : OSB, particleboards and fiberboards.) |
| NF B51-120-1987 | 纖維板.試驗的一般條件 | (Wood based panels. General testing requirements.) |
| NF B51-128-1993 | 纖維板.螺釘軸向抽出阻力的測定 | (FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).) |
| NF B51-142-1-1993 | 纖維板.表面吸水性的測定.第1部分:干處理纖維板的試驗方法 | (FIBREBOARDS. DETERMINATION OF SURFACE ABSORPTION. PART 1 : TEST METHOD FOR DRY PROCESS FIBREBOARDS. (EUROPEAN STANDARD EN 382-1).) |
| NF B51-142-2-1994 | 纖維板.表面吸水性的測定.第2部分:硬質板的試驗方法 | (FIBREBOARDS. DETERMINATION OF SURFACE ABSORPTION. PART 2 : TEST METHOD FOR HARDBOARDS. (EUROPEAN STANDARD EN 382-2).) |
| NF B51-190-1987 | 纖維板.取樣 | (Wood based panels. Sampling.) |
| NF B51-249-1993 | 碎料板和纖維板.浸水后膨脹厚度的測定 | (PARTICLEBOARDS AND FIBREBOARDS. DETERMINATION OF SWELLING IN THICKNESS AFTER IMMERSION IN WATER. (EUROPEAN STANDARD EN 317).) |
| NF B51-250-1993 | 刨花板和纖維板.垂直于板平面的拉伸強度的測定 | (Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board.) |
| NF B54-050-1993 | 木質纖維板.定義、分類和符號 | (WOOD FIBREBOARDS. DEFINITION, CLASSIFICATION AND SYMBOLS. (EUROPEAN STANDARD EN 316).) |
| NF B54-051-1-1997 | 纖維板規范.第1部分:一般要求(歐洲標準EN 622-1) | (Fibreboards. Specifications. Part 1 : general requirements.) |
| NF B54-051-1-2003 | 纖維板.規范.第1部分:一般要求 | (Fibreboards - Specifications - Part 1 : general requirements.) |
| NF B54-051-2-1997 | 纖維板規范.第2部分:硬紙板要求(歐洲標準EN 622-2) | (Fibreboards. Specifications. Part 2 : requirements for hardboards.) |
| NF B54-051-3-1997 | 纖維板規范.第3部分:中形板要求(歐洲標準EN 622-3) | (Fibreboards. Specifications. Part 3 : requirements for medium boards.) |
| NF B54-051-4-1997 | 纖維板.規范.第4部分:軟質板要求 | (Fibreboards. Specifications. Part 4 : requirements for softboards.) |
| NF B54-051-5-1997 | 纖維板規范.第5部分:干制板(MDF)要求(歐洲標準EN 622-5) | (Fibreboards. Specifications. Part 5 : requirements for dry process boards (MDF).) |
| NF B54-115-1997 | 定向纖維板.定義、分類和規范 | (Oriented Strand Boards (OSB). Definitions, classification and specifications.) |
| NF B55-001-1962 | 木材.包裝或填充用木質纖維 | (WOOD. WOOD FIBRES FOR PACKING AND STUFFING.) |
| NF B56-011-1980 | 纖維板.試驗一般條件 | (WOOD WOOL SLABS. GENERAL TESTING PROCEDURES.) |
| NF B56-012-1980 | 纖維板.板的尺寸與斜度的測定 | (WOOD WOOL SLABS. MEASUREMENTS OF DIMENSIONS AND EDGE SQUERENESS.) |
| NF B56-013-1980 | 纖維板.密度和表面密度的測定 | (WOOD WOOL SLABS. MEASUREMENT OF DENSITY AND WEIGHT PER AREA.) |
| NF B56-014-1980 | 纖維板.彎曲試驗 | (WOOD WOOL SLABS. MEASUREMENT OF BENDING STRENGTH.) |
| NF B56-015-1980 | 纖維板.垂直于板面的壓力試驗 | (WOOD WOOL SLABS. MEASUREMENT OF TRANSVERSE COMPRESSION.) |
| NF B56-016-1980 | 纖維板.垂直于板面的拉力試驗.(帶墊板的試件) | (WOOD WOOL SLABS. MEASUREMENT OF TRANSVERSE TENSILE STRENGTH .) |
| NF B56-017-1980 | 纖維板.氯離子含量的測定 | (WOOD WOOL SLABS. DETERMINATION OF CHLORURE CONTENT.) |
| NF B56-030-1982 | 纖維板.聚苯乙烯合成的.定義.命名 | (POLYSTYREN COMPOSITE WOOD WOOL SLABS. DEFINITION. DESIGNATION.) |
| NF B56-031-1982 | 纖維板.聚苯乙烯合成的.規范 | (POLYSTYREN COMPOSIITE WOOD WOOL SLABS. SPECIFICATIONS.) |
| NF C26-113-5-1995 | 云母基絕緣材料規范.第3部分:單項材料規范.第5活頁:用環氧樹脂粘合劑粘結的待浸漬處理的玻璃纖維織物襯底云 | (Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).) |
| NF C26-113-6-1995 | 云母基絕緣材料規范.第3部分:單項材料規范.第6活頁:用B級環氧樹脂粘合劑粘結的玻璃纖維織物襯底云母紙 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.) |
| NF C26-148-11-1998 | 電工用壓敏膠粘帶.第3部分:單項材料規范.第11活頁:纖維素質縐紋紙和帶有橡膠熱固膠粘劑的聚對苯二甲酸乙酯 | (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 11 : combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive.) |
| NF C26-148-13-1996 | 電工用壓敏粘帶規范.第3部分:單項材料規范.第13活頁:一側涂覆熱塑材料、另一側帶有橡膠制熱固性膠的結合纖 | () |
| NF C26-148-4-1998 | 電氣用壓力敏感粘接帶.第3部分:個體材料規范.第4節:帶橡膠熱塑粘接的,皺折的,纖維素紙 | (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : cellulosic paper, creped, with rubber thermosetting adhesive.) |
| NF C26-148-5-1998 | 電氣用壓力敏感粘接帶.第3部分:個體材料規范.第5節:帶橡膠熱塑粘接的,非皺折的,纖維素紙 | (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : cellulosic paper, non creped, with rubber thermosetting adhesive.) |
| NF C26-148-8-1998 | 電工用壓敏膠粘帶.第3部分:單項材料規范.第8節:帶有壓敏膠粘劑的玻璃纖維 | (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 8 : glass fabric with pressure-sensitive adhesive.) |
| NF C26-148-9-1998 | 電工用壓敏膠粘帶.第3部分:單項材料規范.第9活頁:帶有橡膠熱固膠粘劑的纖維素醋酸紡織纖維帶 | (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 9 : cellulose acetate woven fabric tapes with rubber thermosetting adhesive.) |
| NF C26-155-1997 | 玻璃和玻璃聚酯纖維機織帶的規范.第1部分:定義、分類和總要求 | (Specification for glass and glass polyester fibre woven tapes. Part 1 : definitions, classification and general requirements.) |
| NF C26-156-1997 | 玻璃和玻璃聚酯纖維機織帶的規范.第2部分:試驗方法 | (Specification for glass and glass polyester fibre woven tapes. Part 2 : methods of test.) |
| NF C26-157-1-1995 | 玻璃和玻璃聚酯纖維機織帶的規范.第3部分:專用材料規范.第1活頁:1,2,3型織帶 | (Glass and glass polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : types 1, 2 and 3 tapes.) |
| NF C26-158-1-1998 | 聚酯纖維機織帶規范.第1部分:定義、名稱與符號和一般要求 | (Specification for polyester fibre woven tapes. Part 1 : definitions, designation and general requirements.) |
| NF C26-158-2-1998 | 聚酯纖維機織帶規范.第2部分:試驗的方法 | (Specification for polyester fibre woven tapes. Part 2 : methods of test.) |
| NF C26-158-3-1-1995 | 聚酯纖維機織帶.第3部分:專用材料規范.第1活頁:常規的或無梭織機編織帶 | (Polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : tapes woven on conventional or shuttleless looms.) |
| NF C26-197-2003 | 電工用纖維素紙.第2部分：試驗方法 | (Cellulosic papers for electrical purposes - Part 2 : methods of test.) |
| NF C27-135-2003 | 絕緣油.用顯微鏡計數法測定纖維污染 | (Insulating oil - Determination of fibre contamination by the counting method using a microscope.) |
| NF C27-228-1-1995 | 電工用非纖維素紙.第1部分:定義和一般要求 | (Non-cellulosic papers for electrical purposes. Part 1 : definitions and general requirements.) |
| NF C27-228-2-2002 | 電工用非纖維素紙.第2部分:試驗方法 | (Non-cellulosic papers for electrical purposes - Part 2 : methods of test.) |
| NF C27-228-3-1-2002 | 電工用非纖維素紙.第3部分:單項材料規范.第1活頁:填充玻璃砂紙 | (Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 1 : filled glass paper.) |
| NF C27-228-3-2-2002 | 電工用非纖維素紙.第3部分:單項材料規范.第2活頁:混合無機-有機紙 | (Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 2 : hybrid inorganic-organic paper.) |
| NF C27-228-3-4-2002 | 電工用非纖維素紙.第3部分:單項材料規范.第4活頁:含不超過50%的云母粒子的芳族纖維紙 | (Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 4 : aramid fibre paper containing not more than 50 % of mica particles.) |
| NF C27-252-1995 | 絕緣油.火焰線性傳播.使用玻璃纖維的試驗方法 | (Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape.) |
| NF C31-004-2000 | 特種繞組線規范.第0部分:一般要求.第4節:玻璃纖維繞組樹脂或清漆浸漬的裸銅線或漆包扁銅線 | (Specifications for particular types of winding wires - Part 0 : general requirements - Section 4 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-004/A1-2001 | 特種繞組線規范.第0-4部分:一般要求.玻璃纖維繞組樹脂或清漆浸漬裸銅線或漆包扁銅線 | (Specifications for particular types of winding wires - Part 0-4 : general requirements Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-005-2000 | 特種繞組線規范.第0部分:一般要求.第5節:帶玻璃纖維保護層的樹脂或清漆浸漬的裸的或漆包扁銅線 | (Specifications for particular types of winding wires - Part 0 : general requirements - Section 5 : glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-681-2000 | 特種繞組線規范.第31部分:玻璃纖維繞制樹脂或清漆浸漬的裸的或漆包扁銅繞組線.溫度指數180 | (Specifications for particular types of winding wires - Part 31 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.) |
| NF C31-682-2000 | 特種繞組線規范.第32部分:玻璃纖維繞制樹脂或清漆浸漬的裸的或漆包扁銅繞組線.溫度指數155 | (Specifications for particular types of winding wires - Part 32 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155.) |
| NF C31-683-1998 | 特種繞組線規范.第33部分:溫度指數為200的,玻璃纖維繞制的,硅氧烷漆處理過的裸線或漆包扁銅繞組線 | (Specifications for particular types of winding wires - Part 33 : glass-fibre wound, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200.) |
| NF C31-683/A1-2000 | 特種繞組線規范.第33部分:玻璃纖維環繞樹脂或清漆浸漬的裸的或漆包扁銅線.溫度指數200 | (Specifications for particular types of winding wires - Part 33 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200.) |
| NF C31-689-1995 | 特種繞組線規范.第39部分:溫度指數為180的玻璃纖維編織的,聚酯或聚酰胺酯漆處理過的裸線或漆包扁銅繞組線 | (Specifications for particular types of winding wires. Part 39 : glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180.) |
| NF C31-689/A1-2000 | 特種繞組線規范.第39部分:玻璃纖維編織的樹脂的或清漆浸漬的裸的或漆包扁銅線.溫度指數180 | (Specifications for particular types of winding wires - Part 39 : Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.) |
| NF C31-690-1995 | 特種繞組線規范.第40部分:溫度指數為200的玻璃纖維編織的,硅氧烷漆處理過的裸線或漆包扁銅繞組線 | (Specification for particular types of winding wires. Part 40 : glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200.) |
| NF C31-690/A1-2000 | 特種繞組線規范.第40部分:玻璃纖維編織的樹脂的或清漆浸漬的裸的或漆包扁銅線.溫度指數200 | (Specifications for particular types of winding wires - Part 40 : Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200.) |
| NF C31-699-2001 | 特種繞阻線規范.第49部分:玻璃纖維繞阻線樹脂或包漆裸露圓銅線溫度指數180 | (Specifications for particular types of winding wires - Part 49 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire temperature index 180.) |
| NF C32-060-1996 | 通訊電纜用聚烯烴纖維絕緣護套 | (Polyolefin insulation and sheath for communication cables.) |
| NF C32-130-1990 | 設備用絕緣電纜和導線.額定電壓≤450/750V的無齒素非鎧裝改進耐火性的C1型熱塑合成纖維絕緣電纜 | () |
| NF C46-607-1991 | 發送器.致動器和程序控制裝置之間FIP信息交換用的總線.光導纖維上的帶狀物理層 | (Fip bus for exchange of information between transmitters, actuators and programmable controllers. Fiber optic physical layer.) |
| NF C86-506-1986 | 電子元件.ＣＥＮＥＬＥＣ質量保證體系.光導纖維用插腳式光電二極管.特殊規范 | (SEMICONDUCTOR DEVICES. HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS PIN-PHOTODIODES FOR FIBRE OPTIC APPLICATIONS. BLANK DETAIL SPECIFICATION. (SPECIFICATION CECC 20 006).) |
| NF C86-508-1993 | 空白詳細規范.光學纖維系統及子系統用發光二極管及紅外二極管.(歐洲標準 EN 120008) | (Blank detail specification. Light emitting diodes and infrared emitting diodes for fibre optic system or sub-system.) |
| NF C91-004-24-1997 | 電磁兼容性(EMC).第4部分:試驗和測量技術.第4部分:防止麻纖維物發生傳導故障的裝置用測試方法.基本EMC的公 | (Electromagnetic compatibility (EMC). Part 4 : testing and measurement techniques. Section 24 : test methods for protective devices for HEMP conducted disturbance. Basic EMC publication.) |
| NF C93-302-41-1998 | 纖維光學互連接裝置和無源連接.基本試驗和測量過程.第2-4部分:試驗.單模調諧無角光學纖維連接件的天線的屏 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-41 : tests. Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors.) |
| NF C93-303-40-1998 | 纖維光學互連接裝置和無源連接.基本試驗和測量過程.第3-40:檢驗和測量.偏振維持(PM)纖維柔韌銅線連接件的消 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-40 : examinations and measurements. Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector.) |
| NF C93-643-300-2003 | 絕緣軟管.第3部分:各種型號軟管規范.第300篇:無涂層的玻璃纖維編織軟管 | (Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheet 300 : glass textile fibre sleeving, braided, uncoated.) |
| NF C93-643-400-2003 | 絕緣軟管.第3部分:各種型號軟管的規范要求.第400至402篇:帶有機硅橡膠涂層的玻璃纖維織物軟管 | (Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheets 400 to 402 : glass textile sleeving with silicone elastomer coating.) |
| NF C93-714-1975 | 電子元件.印制電路.多層印制電路板用環氧樹脂浸潤的玻璃纖維織物.一般規定 | (Components for electronic equipment. Printed circuits. Woven glass fabric impregnated with expoxid resin for printed boards.) |
| NF C93-749-1996 | 印制電路用基材.第2部分:規范.第1號規范:高電氣質量的酚醛纖維素紙覆銅層壓板 | (Base materials for printed circuits. Part 2 : specifications. Specification number 1 : phenolic cellulose paper copper-clad laminated sheet, high electrical quality.) |
| NF C93-749/A1-2001 | 印制電路的基材.第2部分:規范.1號規范.高電氣性能的銅包覆片層狀酚醛纖維素紙 | (Base materials for printed circuits - Part 2 : specifications - Specification n o 1 : phenolic cellulose paper copper-clad laminated sheet high electrical quality.) |
| NF C93-752-1996 | 印制電路用基材.第2部分:規范.第2號規范:高經濟質量的酚醛纖維素紙覆銅層壓板 | (Base materials for printed circuits. Part 2 : specifications. Specification number 2 : phenolic cellulose paper copper-clad laminated sheet, economic quality.) |
| NF C93-752/A1-2001 | 印制電路用基材.第2部分:規范.第2號規范:酚醛纖維素紙覆銅箔層壓板.經濟型 | (Base materials for printed circuits - Part 2 : specification - Specification n o 2 : phenolic cellulose paper copper-clad laminated sheet, economic quality.) |
| NF C93-753-1996 | 印制電路用基材.第2部分:規范.第3號規范:規定易燃性的環氧化合物纖維素紙覆銅層壓板(垂直燃燒試驗) | (Base materials for printed circuits. Part 2 : specifications. Specification number 3 : epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-753/A1-2001 | 印制電路的基材.第2部分:規范.3號規范.限定燃燒性的銅包覆片層狀環氧纖維素紙 | (Base materials for printed circuits - Part 2 : specifications - Specification n o 3 : epoxyde cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-754-1996 | 印制電路用基材.第2部分:規范.第4號規范:普通級的環氧化合物編織的玻璃纖維覆銅層壓板 | (Base materials for printed circuits. Part 2 : specifications. Specification no 4 : epoxide woven glass fabric copper-clad laminated sheet, general purpose grade.) |
| NF C93-754/A5-2000 | 印制電路用基材.第2部分:規范.第4號規范:普通等級環氧化合物編織的玻璃纖維覆銅層壓板 | (Base materials for printed circuits. Part 2 : specifications. Specification no 4 : epoxide woven glass fabric copper-clad laminated sheet, general purpose grade.) |
| NF C93-755-1996 | 印制電路用基材.第2部分:規范.第5號規范:規定易燃性的環氧化合物編織玻璃纖維織物覆銅層壓板(垂直燃燒試驗) | (Base materials for printed circuits. Part 2 : specifications. Specification no 5 : epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-755/A1-2001 | 印制電路的基本材料.第2部分:規范.第5號規范.確定了可燃性的環氧化物織物玻璃纖維銅覆層片 | (Base materials for printed circuits - Part 2 : specifications - Specification no 5 : epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-756-1996 | 印制電路用基材.第2部分:規范.第6號規范:規定易燃性的酚醛纖維素紙覆銅層壓板(水平燃燒試驗) | (Base materials for printed circuits. Part 2 : specifications. Specification no 6 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test).) |
| NF C93-756/A1-2001 | 印制電路的基本材料.第2部分:規范.第5號規范.確定了可燃性(水平燃燒試驗)酚醛纖維素銅涂覆層片 | (Base materials for printed circuits - Part 2 : specifications - Specification no 6 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test).) |
| NF C93-757-1996 | 印制電路用基材.第2部分:規范.第7號規范:規定易燃性的酚醛纖維素紙覆銅層壓板(垂直燃燒試驗) | (Base materials for printed circuits. Part 2 : specifications. Specification no 7 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-757/A1-2001 | 印制電路的基本材料.第2部分:規范.第7號規范.確定了可燃性(垂直燃燒試驗)酚醛纖維素銅涂覆層片 | (Base materials for printed circuits - Part 2 : specifications - Specification no 7 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-759-1996 | 印制電路用基材.第2部分:規范.第9號規范:規定易燃性的環氧化合物纖維素紙芯、環氧化合物玻璃布表面覆銅層壓 | (Base materials for printed circuits. Part 2 : specifications. Specification number 9 : epoxide cellulose paper core, epoxyde glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-759/A1-2001 | 印制電路的基本材料.第2部分:規范.第9號規范.確定了可燃性(垂直燃燒試驗)環氧纖維素紙芯環氧玻璃布表面銅涂 | (Base materials for printed circuits - Part 2 : specifications - Specification no 9 : epoxide cellulose paper core, epoxyde glass cloth surfaces copper-clad laminated sheet of defined flammability (ver) |
| NF C93-760-1996 | 印制電路用基材.第2部分:規范.第10號規范:規定易燃性的環氧化合物非編織或編織玻璃纖維增強覆銅層壓板(垂直 | (Base materials for printed circuits. Part 2 : specifications. Specification number 10 : epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-761-1996 | 印制電路用基材.第2部分:規范.第11號規范:多層印制電路板制作用普通級薄環氧化合物編織的玻璃纖維覆銅層壓 | (Base materials for printed circuits. Part 2 : specifications. Specification no 11 : thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards.) |
| NF C93-761/A1-2001 | 印制電路的基本材料.第2部分:規范.第10號規范.用于多層印制板生產中使用的一般用途級別的薄環氧織物玻璃纖 | (Base materials for printed circuits - Part 2 : specifications - Specification No 11 : thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of) |
| NF C93-762-1996 | 印制電路用基材.第2部分:規范.第12號規范:多層印制電路板制作用規定易燃性的薄環氧化合物編織玻璃纖維織物 | (Base materials for printed circuits. Part 2 : specifications. Specification no 12 : thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards.) |
| NF C93-764-1996 | 印制電路用基材.第2部分:規范.第14號規范:經濟質量的規定易燃性的酚醛纖維素紙覆銅層壓板(垂直燃燒試驗) | (Base materials for printed circuits. Part 2 : specifications. Specification number 14 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality.) |
| NF C93-764/A1-2001 | 印制電路用基材.第2部分:規范.第14號規范:規定易燃性的酚醛纖維素紙鍍銅層壓板(垂直燃燒試驗) | (Base materials for printed circuits - Part 2 : specification - Specifications number 14 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic) |
| NF C93-766-1994 | 印制電路用基材.第2部分:規范.第16號規范:規定易燃性的聚酰亞胺玻璃纖維織物覆銅層壓板(垂直燃燒試驗) | (Base materials for printed circuits. Part 2 : specifications. Specification number 16 : polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-767-1994 | 印制電路用基材.第2部分:規范.第17號規范:多層印制板制作用的規定易燃性的聚酰亞胺編織玻璃纖維織物覆銅層 | (Base materials for printed circuits. Part 2 : specifications. Specification number 17 : thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed board.) |
| NF C93-768-1994 | 印制電路用基材.第2部分:規范.第18號規范:規定易燃性的比斯瑪勒米德(bismaleimide)/三嗪改良型環氧化合物編 | (Base materials for printed circuits. Part 2 : specifications. Specification number 18 : bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-769-1994 | 印制電路用基材.第2部分:規范.第19號規范:多層印制板制作用的規定易燃性的bismaleimide/三嗪改良型環氧化物 | () |
| NF C93-780-2-10-2003 | 印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.阻燃型銅包被改良或未改良的氰酸酯溴化環氧 | () |
| NF C93-780-2-18-2002 | 印制板和其它互連結構用材料.第2-18部分:包覆或非包覆增強基材.規定了易燃性的覆銅非編織玻璃纖維增強層壓 | (Materials for printed boards and other interconnecting structures - Part 2-18 : reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flamma) |
| NF C93-780-2-19-2002 | 印制板和其它互連結構用材料.第2-19部分:被包和非包被增強基材料.規定燃燒性的環氧交叉簾布層線性纖維玻璃 | (Materials for printed boards and other interconnecting structures - Part 2-19 : reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of define) |
| NF C93-780-2-4-2002 | 印制板和其它互連結構用材料.第2-4部分:包覆和非包覆增強基材.規定了易燃性的覆銅聚酯非編織/編織玻璃纖維 | (Materials for printed boards and other interconnecting structures - Part 2-4 : reinforced base materials clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability) |
| NF C93-780-2-7-2002 | 印制板和其它互連結構用材料.第2-7部分:涂覆和非涂覆增強基材.規定了易燃性的環氧編織E型玻璃纖維層壓覆銅 | (Materials for printed boards and other interconnecting structures - Part 2-7 : reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burni) |
| NF C93-800-1999 | 纖維光學傳感器.第1部分:總規范 | (Fibre optic sensors. Part 1 : generic specification.) |
| NF C93-807-1-3-1999 | 纖維光學通信子系統基本試驗程序.第1-3部分:一般通信子系統的試驗程序.中心波長和譜寬的測量 | (Fibre optic communication subsystem basic test procedures. Part 1-3 : test procedures for general communication subsystems. Central wavelength and spectral width measurement.) |
| NF C93-807-2-2-1999 | 纖維光學通信子系統基本試驗過程.第2-2部分:數字系統試驗過程.光學眼孔圖,波形和消亡比率 | (Fibre optic communication subsystem basic test procedures. Part 2-2 : test procedures for digital systems. Optical eye pattern, waveform and extinction ratio.) |
| NF C93-811-1987 | 光導纖維互聯裝置和無源元件.光纖和電纜連接件的分規范.CF03型 | (FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF03.) |
| NF C93-812-1987 | 光導纖維互聯裝置和無源元件.光纖和電纜連接件的分規范.CF04型 | (FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF04.) |
| NF C93-813-1987 | 光導纖維互聯裝置和無源元件.光纖和電纜連接件的分規范.CF05型 | (FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF05.) |
| NF C93-814-1989 | 電子元件.光導纖維無源元件和連接裝置.光學元件過渡規范 | (FIBRE OPTICS INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION FOR MECHANICAL SPLICES.) |
| NF C93-829-1997 | 纖維光學扇形輸出器.第1部分:總規范 | (Fibre optic fan-outs. Part 1 : generic specification.) |
| NF C93-840-1-20-2002 | 光學纖維.第1-20部分:測量方法和試驗規程.纖維幾何 | (Optical fibres - Part 1-20 : measurement methods and test procedures - Fibre geometry.) |
| NF C93-840-1-21-2002 | 光學纖維.第1-21部分:測量方法和試驗規程.鍍涂幾何 | (Optical fibres - Part 1-21 : measurement methods and test procedures - Coating geometry.) |
| NF C93-840-1-22-2002 | 光學纖維.第1-22部分:測量方法和試驗程序.長度測量 | (Optical fibres - Part 1-22 : measurements methods and test procedures - Length measurement.) |
| NF C93-840-1-30-2002 | 光學纖維.第1-30部分:測量方法和試驗規程.纖維驗證試驗 | (Optical fibres - Part 1-30 : measurement methods and test procedures - Fibre proof test.) |
| NF C93-840-1-31-2002 | 光學纖維.第1-31部分:測量方法和試驗程序.抗拉強度 | (Optical fibres - Part 1-31 : measurement methods and test procedures - Tensile strength.) |
| NF C93-840-1-33-2002 | 光學纖維.第1-33部分:測量方法和試驗規程.應力腐蝕性 | (Optical fibres - Part 1-33 : measurement methods and test procedures - Stress corrosion susceptibility.) |
| NF C93-840-1-34-2002 | 光學纖維.第1-34部分:測量方法和試驗程序.纖維卷曲度 | (Optical fibres - Part 1-34 : measurement methods and test procedures - Fibre curl.) |
| NF C93-840-1-41-2002 | 光學纖維.第1-41部分:測量方法和試驗程序.帶寬度 | (Optical fibres - Part 1-41 : measurement methods and test procedures - Bandwidth.) |
| NF C93-840-1-42-2002 | 光學纖維.第1-42部分:測量方法和試驗程序.顏色描述 | (Optical fibres - Part 1-42 : measurement methods and test procedures - Chromatic dispersion.) |
| NF C93-840-1-43-2002 | 光學纖維.第1-43部分:測量方法和試驗程序.數字孔徑 | (Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture.) |
| NF C93-840-1-44-2002 | 光學纖維.第1-44部分:測量方法和試驗程序.截止波長 | (Optical fibres - Part 1-44 : measurements methods and test procedures - Cut-off wavelength.) |
| NF C93-840-1-46-2002 | 光學纖維.第1-46部分:測量方法和試驗程序.監測光透射率變化 | (Optical fibres - Part 1-46 : measurement methods and test procedures - Monitoring of changes in optical transmittance.) |
| NF C93-840-1-47-2002 | 光學纖維.第1-47部分:測量方法和試驗程序.微彎曲損耗 | (Optical fibres - Part 1-47 : measurement methods and test procedures - Macrobending loss.) |
| NF C93-840-1-50-2002 | 光學纖維.第1-50部分:測量方法和試驗規程.濕熱(穩態) | (Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state).) |
| NF C93-840-1-51-2002 | 光學纖維.第1-51部分:測量方法和試驗程序.干熱 | (Optical fibres - Part 1-51 : measurement methods and test procedures - Dry heat.) |
| NF C93-840-1-52-2002 | 光學纖維.第1-52部分:測量方法和試驗程序.溫度變化 | (Optical fibres - Part 1-52 : measurement methods and test procedures - Change of temperature.) |
| NF C93-840-1-53-2002 | 光學纖維.第1-53部分:測量方法和試驗程序.水浸濕 | (Optical fibres - Part 1-53 : measurement methods and test procedures - Water immersion.) |
| NF C93-840-1987 | 電子元件.光導纖維過渡總規范 | (ELECTRONIC COMPONENTS. GENERIC SPECIFICATION FOR OPTICAL FIBRES.) |
| NF C93-841-1989 | 光導纖維過渡規范 | (SECTIONAL SPECIFICATION FOR OPTICAL FIBRES.) |
| NF C93-850-1-1-2002 | 光學纖維電纜.第1-1部分:總規范.總則 | (Optical fibre cables - Part 1-1 : generic specification - General.) |
| NF C93-850-2-10-2003 | 光學纖維電纜.第2-10部分:室內光纜.單股光纜和雙股光纜的系列規范 | (Optical fibre cables - Part 2-10 : indoor cables - Family specification for simplex and duplex cables.) |
| NF C93-850-2-20-2003 | 光學纖維電纜.第2-20部分:室內光纜.多纖配電光纜的系列規范 | (Optical fibre cables - Part 2-20 : indoor cables - Family specification for multi-fibre optical distribution cables.) |
| NF C93-850-2-2003 | 光學纖維電纜.第2部分:室內光纜.分規范 | (Optical fibre cables - Part 2 : indoor cables - Sectional specification.) |
| NF C93-850-2-30-2003 | 光學纖維電纜.第2-30部分:室內光纜.光纖帶狀電纜類規范 | (Optical fibre cables - Part 2-30 : indoor cables - Family specification for optical fibre ribbon cables.) |
| NF C93-859-3-2003 | 系列規范.室內用光學纖維電纜 | (Family specification - Optical fibre cables for indoor applications.) |
| NF C93-867-2-1-2002 | 光纖通信系統中使用的接頭組件和互連元件.產品規范.第2-1部分:端接在IEC 60793-2的B1類單模纖維上的FC-PC型 | (Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1 : type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre.) |
| NF C93-867-3-1-2002 | 光纖通信系統中使用的接頭組件和互連元件.產品規范.第3-1部分:端接在IEC 60793-2的A1a類和A1b類多模纖維上 | (Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1 : type SG terminated on IEC 60793-2 category A1a and A1b multimode fibr) |
| NF C93-867-5-1-2003 | 光纖通信系統中使用的連接器組和互連元件.產品規范.第5-1部分:端接在IEC 60793-2的B1.1類單模纖維上的EC型 | (Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 5-1 : type EC terminated on IEC 60793-2 category B1.1 singlemode fibre.) |
| NF C93-883-10-2003 | 纖維光學有源元件及器件.包裝和接口標準.第10部分:SFF MU雙20針無線電收發信機 | (Fiber optic active components and devices - Package and interface standards - Part 10 : SFF MU duplex 20-pin transceivers.) |
| NF C93-883-2-2003 | 纖維光學有源元件及器件.包裝和接口標準.第2部分:SFF MT-RJ 10針無線電收發信機 | (Fibre optic active components and devices - Package and interface standards - Part 2 : SFF MT-RJ 10-pin transceiver.) |
| NF C93-883-3-2003 | 纖維光學有源元件及器件.包裝和接口標準.第3部分:SFF MT-RJ 20針無線電收發信機 | (Fibre optic active components and devices - Package and interface standards - Part 3 : SFF MT-RJ 20-pin transceivers.) |
| NF C93-883-4-2003 | 纖維光學有源元件及器件.包裝和接口標準.第4部分:PN 1 x 9塑料光學纖維無線電收發信機 | (Fibre optic ative components and devices - Package and interface standards - Part 4 : PN 1 x 9 plastic optical fibre transceivers.) |
| NF C93-883-5-2003 | 纖維光學有源元件及器件.包裝和接口標準.第5部分:SC 1纖維光學模數 | (Fibre optic active components and devices - Package and interface standards - Part 5 : SC 1 x 9 fibre optic module.) |
| NF C93-883-7-2003 | 纖維光學有源元件及器件.包裝和接口標準.第7部分:SFF LC 10針無線電收發信機 | (Fibre optic active components and devices - Package and interface standards - Part 7 : SFF LC 10-pin transceivers.) |
| NF C93-883-8-2003 | 纖維光學有源元件及器件.包裝和接口標準.第8部分:SFF LC 20針無線電收發信機 | (Fibre optic active components and devices - Package and interface standards - Part 8 : SFF LC 20-pin transceivers.) |
| NF C93-883-9-2003 | 纖維光學有源元件及器件.包裝和接口標準.第9部分:SFF MU雙10針無線電收發信機 | (Fiber optic active components and devices - Package and interface standards - Part 9 : SFF MU duplex 10-pin transceivers.) |
| NF C93-884-4-2003 | 纖維光學有源元件和器件.性能標準.第4部分:千兆比特以太網用1300nm纖維光學無線電收發信機 | (Fibre optic active components and devices - Performance standards - Part 4 : 1 300 nm fibre optic transceivers for Gigabit Ethernet application.) |
| NF C93-902-10-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-10部分:試驗.抗擠壓 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-10 : tests. Crush resistance.) |
| NF C93-902-11-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-11部分:試驗.軸向壓力 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-11 : tests. Axial compression.) |
| NF C93-902-12-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-12部分:試驗.沖壓 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-12 : tests. Impact.) |
| NF C93-902-13-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-13部分:試驗.加速度 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-13 : tests. Acceleration.) |
| NF C93-902-15-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-15部分:試驗.連接機械的扭矩強度 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-15 : tests. Torque strength of coupling mechanism.) |
| NF C93-902-16-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-16部分:試驗.去皮增大 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-16 : tests. Moult growth.) |
| NF C93-902-17-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-17部分:試驗.冷卻 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-17 : tests. Cold.) |
| NF C93-902-18-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-17部分:試驗.干熱.耐高溫 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-18 : tests. Dry heat. High temperature endurance.) |
| NF C93-902-20-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-20部分:試驗.氣候順序 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-20 : tests. Climatic sequence.) |
| NF C93-902-21-1997 | 光學纖維互聯元件和無源元件.基本試驗和測量過程.第2-21部分:試驗.復合溫度-濕度周期試驗 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-21 : tests. Composite temperature humidity cyclic test.) |
| NF C93-902-22-1997 | 纖維光學互聯裝置和無源元件.基本試驗和測量過程.第2-22部分:試驗.溫度變化 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-22 : tests. Change of temperature.) |
| NF C93-902-23-1997 | 光學纖維互聯元件和無源元件.基本試驗和測量過程.第2-23部分:試驗.纖維光學裝置非壓力封閉密封 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-23 : tests. Sealing for non-pressurized closures of fibre optic devices.) |
| NF C93-902-25-1998 | 纖維光學連接裝置和無源元件.基本試驗和測量程序.第2-25部分:試驗.閉合的密封持久性(歐洲標準EN 61 300-2-2 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-25 : tests. Sealing endurance for closures.) |
| NF C93-902-26-1998 | 纖維光學連接裝置和無源元件.基本試驗和測量程序.第2-26部分:試驗.鹽霧(歐洲標準EN 61 300-2-26) | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-26 : tests. Salt mist.) |
| NF C93-902-28-1998 | 纖維光學連接裝置和無源元件.基本試驗和測量程序.第2-28部分:試驗.工業氣體(二氧化硫)(歐洲標準EN 61 300-2 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-28 : tests. Industrial atmosphere (sulphur dioxide).) |
| NF C93-902-29-1998 | 纖維光學互聯裝置和無源元件.基本試驗和測量過程.第2-29部分:試驗.低空氣壓 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-29 : tests. Low air pressure.) |
| NF C93-902-30-1998 | 纖維光學連接裝置和無源元件.基本試驗和測量程序.第2-30部分:試驗.陽光輻照(歐洲標準EN 61 300-2-30) | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-30 : tests. Solar radiation.) |
| NF C93-902-32-1998 | 纖維光學連接裝置和無源元件.基本試驗和測量程序.第2-32部分:試驗.水蒸氣滲透(歐洲標準EN 61 300-2-32) | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-32 : tests. Water vapour permeation.) |
| NF C93-902-33-1998 | 纖維光學互聯裝置和無源元件.基本試驗和測量過程.第2-33部分:試驗.隔板的組裝和非組裝 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-33 : tests. Assembly and dissassembly of closures.) |
| NF C93-902-34-1998 | 纖維光學連接裝置和無源元件.基本試驗和測量程序.第2-34部分:耐溶劑和污染性液體試驗(歐洲標準EN 61 300-2- | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-34 : tests. Resistance to solvents and contaminating fluids.) |
| NF C93-902-38-1998 | 光纖互連設備和無源元件.基本試驗和測量程序.第2部分第38節:試驗.纖維光學設備的壓合密封 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-38 : tests. Sealing for pressurized closures of fibre optic devices.) |
| NF C93-902-4-1997 | 光纖互聯裝置和無源元件.基本試驗和測量過程.第2-3部分:試驗.纖維/電纜滯留 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-4 : tests. Fibre/cable retention.) |
| NF C93-902-5-1997 | 纖維光學互連裝置和無源元件.基本檢驗和測量程序.第2-5部分:檢驗.扭矩/繞轉 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-5 : tests. Torsion/twist.) |
| NF C93-902-6-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-6部分:檢驗.聯接裝置的抗拉強度. | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-6 : tests. Tensile strength of coupling mechanism.) |
| NF C93-902-7-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-7部分:試驗.彎矩 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-7 : tests. Bending moment.) |
| NF C93-902-8-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-8部分:試驗.撞擊 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-8 : tests. Bump.) |
| NF C93-902-9-1997 | 纖維光學連接裝置和無源元件.基本檢驗和測量程序.第2-9部分:試驗.沖擊 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-9 : tests. Shock.) |
| NF C93-903-13-1998 | 光纖互連設備和無源元件.基本試驗和測量程序.第3部分第13節:檢驗和測量.纖維光學開關的控制穩定性 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-13 : examinations and measurements. Control stability of a fibre optic switch.) |
| NF C93-903-19-1997 | 光學纖維互聯元件和無源元件.基本試驗和測量過程.第3-19部分:檢驗和測量.單模纖維光學元件回復損失的極化依 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-19 : examinations and measurements. Polarization dependence of return loss of a single mode fibre optic component.) |
| NF C93-903-2-2000 | 光纖互聯裝置和無源元件.基本試驗和測量步驟.第3-2部分:檢驗和測量.單模纖維光學裝置的偏振-衰減曲線 | (Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2 : examinations and measurements - Polarization dependence of attenuation in a single-mode) |
| NF C93-903-22-1997 | 光學纖維互聯元件和無源元件.基本試驗和測量過程.第3-22部分:檢驗和測量.金屬箍壓力 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-22 : examinations and measurements. Ferrule compression force.) |
| NF C93-903-23-1998 | 光纖互聯裝置和無源元件.基本試驗和測量過程.第2-23部分:檢驗和測量.與金屬箍有關的纖維位置(EN 61300-3-23 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-23 : examination and measurements. Fibre position relative to ferrule endface.) |
| NF C93-903-25-1997 | 光學纖維互聯元件和無源元件.基本試驗和測量過程.第3-25部分:檢驗和測量.金屬箍和安裝光纖的金屬箍的同心性 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-25 : examinations and measurements. Concentricity of the ferrules and ferrules with fibre installed.) |
| NF C93-903-26-1997 | 光學纖維互聯元件和無源元件.基本試驗和測量過程.第3-26部分:光纖和金屬箍軸之間角度不重合性的測量 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-26 : examinations and measurements. Measurement of the angular misalignment between fibre and ferrules axes.) |
| NF C93-903-28-2002 | 纖維光學內連接器件和無源元件.基本試驗和測量程序.第3-28部分:檢驗和測量.瞬態損耗 | (Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28 : examinations and measurements - Transient loss.) |
| NF C93-903-31-2003 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-34部分:檢驗和測量.纖維光學源的耦合功率比測量 | (Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31 : examinations and measurements - Coupled power ratio measurement for fibre optic sources) |
| NF C93-903-34-1998 | 纖維光學互聯裝置和無源元件.基本試驗和測量過程.第3-34部分:檢驗和測量.隨機配對連接器的衰減 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-34 : examinations and measurements. Attenuation of random mated connectors.) |
| NF C93-903-36-2000 | 光纖互連裝置和無源部件.基本試驗和測量步驟.第3-36部分:檢驗和測量.纖維光學連接器金屬箍的內外徑測量方法 | (Fibre optic interconnecting devices and passives components - Basic test and measurement procedures - Part 3-36 : examinations and measurements - measurrement methods for the inside and outside diamet) |
| NF C93-903-39-1998 | 纖維光學互聯裝置和無源元件.基本試驗和測量過程.第3-39部分:試驗,檢驗和測量.PC-光學連接器參考插座的選擇 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-39 : tests. Examinations and measurements. PC optical connector reference plug selection.) |
| NF C93-909-051-3-2002 | 纖維光學內連接器件和無源元件性能標準.第051-3部分:U類用單膜光纖和插座式固定衰減器.非環境控制 | (Fibre optic interconnecting devices and passive components performance standard - Part 051-3 : single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment.) |
| NF C93-909-052-3-2002 | 纖維光學內連接器件和無源元件性能標準.第052-3部分:U類用單膜光纖和尾式固定衰減器.非環境控制 | (Fibre optic interconnecting devices and passive components performance standard - Part 052-3 : single-mode fibre, pigtailed-style fixed attenuators for category U - Uncontrolled environment.) |
| NF C93-909-2-1-2001 | 光纖互連裝置和無源部件性能標準.第2-1部分:端接于U等級單模纖維的光纖連接器.非受控環境 | (Fibre optic interconnecting devices and passive components performance standard - Part 2-1 : fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment.) |
| NF C93-910-13-2000 | 纖維光學連接器接口.第13部分:FC-PC型連接器門類 | (Fibre optic conector interfaces - Part 13 : type FC-PC connector family.) |
| NF C93-910-4-1997 | 纖維光學連接器接口.第4部分:SC型連接器系列 | (Fibre optic connector interfaces. Part 4 : type SC connector family.) |
| NF C93-910-4/A1-2000 | 纖維光學連接器接口.第4部分:SC型連接器門類 | (Fibre optic connector interfaces - Part 4 : type SC connector family.) |
| NF C93-910-6-1998 | 纖維光學連接器接口.第6部分:MU型連接器系列 | (Fibre optic connector interfaces. Part 6 : type MU connector family.) |
| NF C93-910-8-1998 | 纖維光學連接器的接口.第6部分:MU型連接族 | (Fibre optic connector interfaces. Part 8 : type CF08 connector family.) |
| NF C93-913-2-2001 | 纖維光學互連裝置和無源元件的可靠性.第2部分:基于加速老化試驗的可靠性定量評價.溫度、濕度和穩定狀態 | (Reliability of fibre optic interconnecting devices and passive components - Part 2 : quantitative assessment of reliability based on accelerated ageing tests - Temperature and humidity, steady state.) |
| NF C93-916-1-2002 | 纖維光學空間開關.第1部分:一般規范 | (Fibre optic spatial switches - Part 1 : generic specification.) |
| NF D90-216-1-1998 | 羽毛和羽絨.羽絨纖維支持特性的試驗方法.磨擦試驗.(歐洲標準12132-1) | (FEATHER AND DOWN. METHODS OF TESTING THE DOWN PROOF PROPERTIES OF FABRICS. PART 1 : RUBBING TEST. (EUROPEAN STANDARD EN 12132-1).) |
| NF D90-216-2-1998 | 羽毛和羽絨.羽絨纖維不透性能的檢驗.第2部分:碰撞試驗 | (FEATHER AND DOWN. METHODS OF TESTING THE DOWN PROOF PROPERTIES OF FABRICS. PART 2 : IMPACT TEST. (EUROPEAN STANDARD EN 12132-2).) |
| NF E64-115-1986 | 木材加工機械.液壓立式包裝或填料用木質纖維制造機.術語 | (WOODWORKING MACHINES. MACHINES FOR WOOD WOOL PRODUCTION HYDRAULIC. NOMENCLATURE.) |
| NF E64-116-1986 | 木材加工機械.四種功能臥式包裝或填料用木質纖維制造機.術語 | (WOODWORKING MACHINES. HORIZONTAL SCHREDDING MACHINES FOR WOOD WOOL PRODUCTION QUADRUPLE EFFECT. NOMENCLATURE.) |
| NF E75-087-2003 | 涂覆磨料.硫化纖維砂輪 | (Coated abrasives - Vulcanized-fibre discs.) |
| NF F01-281-1989 | 鐵路車輛.纖維加強熱固塑料材料 | (RAILWAY ROLLING STOCK. FIBRE REINFORCED THERMOSETING PLASTICS.) |
| NF F13-825-1992 | 鐵路車輛.空調或通風裝置用合成纖維末道空氣過濾網 | (RAILWAY ROLLING STOCK. FINISHER AIR FILTERS, WITH SYNTHETIC FIBRES, FOR CONDITIONING OR VENTILATING UNITS.) |
| NF F55-301-1990 | 鐵路固定設備.信號裝置用玻璃纖維加強聚酯制椎架板 | (RAILWAY FIXED EQUIPMENT. FRAME-BOARDS MADE OF GLASS REINFORCED POLYESTER FOR THE SIGNALLING.) |
| NF G06-001-1979 | 紡織.粘膠或銅或特定類型莫代爾纖維和棉纖維二元混紡織物的定量分析 | (Textiles. Quantitative analysis of binary mixtures of viscose or cupro or certain types of modal and cotton fibres.) |
| NF G06-009-1979 | 織物.三醋酯纖維和某些其它纖維二元混紡織物的定量分析 | (Textiles. Quantitative analysis of binary mixtures of triacetate and certain other fibres.) |
| NF G06-010-1974 | 織物.醋酸酯纖維和三醋酯纖維二元混紡織物的定量分析 | (Textiles. Quantitative analyse of binary mixtures of acetate and triacetate fibres.) |
| NF G06-017-1975 | 棉、化學纖維素和蛋白質纖維三元混紡織物的定量化學分析 | (QUANTITATIVE CHEMICAL ANALYSIS OF TERNARY MIXTURES OF COTTON,REGENERATED CELLULOSE AND PROTEIN SUBSTANCES.) |
| NF G06-018-1971 | 紡織.纖維試驗.羊毛含酸量的測定方法 | (TEXTILES. TESTS FOR FIBRES. DETERMINATION OF THE QUANTITY OF ACID CONTAINED IN WOOL.) |
| NF G06-019-1971 | 紡織.纖維試驗.精梳毛條中二氯甲烷提取物的測定方法 | (DETERMINATION OF THE DICHLOROMETHANE EXTRACT IN A MESCH OF COMBED WOOL.) |
| NF G06-020-1971 | 紡織.纖維試驗.尿素亞硫酸氫鹽中羊毛溶解度的測定方法 | (TEXTILES. TESTS FOR FIBRES. DETERMINATION OF THE SOLUBILITY OF WOOL IN UREA BISULFITE.) |
| NF G06-029-1973 | 紡織.纖維試驗.羊毛中堿含量的測定 | (TEXTILES,TESTS OF FIBRES,METHOD OF DETERMINING THE QUANTITY OF ALKALI CONTAINED IN WOOL.) |
| NF G06-030-1973 | 紡織.纖維試驗.羊毛的水解產物中磺基丙氨酸含量的測定（紙上電泳法和分光光度法） | (TEXTILES,TESTS OF FIBRES,METHOD OF DETERMINING THE QUANTITY OF CYSTEIC ACID CONTAINED IN HYDROLYSATES OF WOOL BY ELECTROPHORESIS ON PAPER AND SPECTROPHOTOMETRY.) |
| NF G06-031-1973 | 紡織.纖維試驗.原毛的鉆色取樣方法 | (TEXTILES,TESTS OF FIBRES,METHOD OF SAMPLING UNTREATED WOOL BY CORE-SAMPLING.) |
| NF G06-032-1978 | 織物.纖維素和石棉纖維二元混紡織物的定量分析 | (Textiles. Quantitative analyse of binary mixtures of cellulose fibers and asbestos.) |
| NF G06-033-1977 | 織物.纖維混紡定量分析前除去非纖維物質的方法 | (Textiles. Methods for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures.) |
| NF G06-034-1979 | 織物.再生纖維素纖維和棉纖維二元混紡織物的定量化學分析 | (TEXTILES. QUANTITATIVE CHEMICAL ANALYSIS OF BINARY MIXTURES OF REGENERATED CELLULOSE FIBRES AND COTTON.) |
| NF G06-035-1979 | 織物.聚酯和某些其它纖維二元混紡織物的定量化學分析 | (Quantitative chemical analysis of binary mixtures of polyester and certain other fibres.) |
| NF G06-037-1981 | 紡織.纖維試驗.纖維素.極限粘度指數和平均粘度測定聚合度的測定 | (TEXTILES. CELLULOSE. DETERMINATION OF LIMITING VISCOSITY NUMBER AND DETERMINATION OF THE AVERAGE VISCOSIMETRIC DEGREE OF POLYMERIZATION.) |
| NF G06-038-1993 | 紡織品.纖維.紗和織物化學分析方法.粘膠絲和亞麻纖維混合物定量分析 | (TEXTILES. METHODS FOR CHEMICAL ANALYSIS OF FIBRES, YARNS AND FABRICS. QUANTITATIVE ANALYSIS OF BINARY MIXTURES OF VISCOSE AND FLAX FIBRES.) |
| NF G07-004-1973 | 紡織.纖維試驗.羊毛纖維直徑的測定.投影顯微鏡法 | (TEXTILES. TESTS FOR FIBRES. DETERMINATION OF THE DIAMETER OF WOOL FIBRES. METHOD USING THE PROJECTION MICROSCOPE.) |
| NF G07-042-3-1998 | 織物.色牢度試驗.丙烯酸纖維用基本染料的內部兼容 | (TEXTILES. TESTS FOR COLOUR FASTNESS. PART Z03 : INTERCOMPATIBILITY OF BASIC DYES FOR ACRYLIC FIBRES. (EUROPEAN STANDARD EN ISO 105-Z03).) |
| NF G07-059-1968 | 紡織.纖維試驗.羊毛纖維平均直徑用磁導計測定方法 | (TEXTILES. TESTS OF FIBRES. AIR PERMEABILITY METHOD FOR THE DETERMINATION OF MEAN DIAMETER OF WOOL FIBRES.) |
| NF G07-060-1968 | 紡織.纖維試驗.在針板機上對羊毛纖維的粗細和頷毛長短進行測定的方法 | (TEXTILES. TESTS OF FIBRES. METHOD FOR DETERMINING BEARD LENGTH AND WOOL FIBRE HEIGHT ON REED APPARATUS.) |
| NF G07-062-1980 | 紡織.纖維試驗.棉花，羊毛和化學纖維的物理試驗用取樣方法 | (TEXTILES. TESTS FOR FIBRES. METHODS OF SAMPLING FOR TESTING FOR COTTON,WOOL OR CHEMICAL FIBRES.) |
| NF G07-073-1970 | 紡織.棉纖維細度值測定方法 | (METHOD OF DETERMINATION OF THE MICRONAIRE VALUE OF COTTON FIBRES.) |
| NF G07-074-1987 | 紡織.纖維試驗.亞麻纖維細度的測定.磁導法 | (TEXTILES. FIBRE TESTS. DETERMINATION OF FLAX FIBRE FINENESS. PERMEAMETRIC METHODS.) |
| NF G07-075-1971 | 紡織.纖維試驗.用投影顯微鏡測定髓體羊毛纖維百分比的方法 | (DETERMINATION OF THE PERCENTAGE OF WOOL FIBRE MEDULLATION USING A PROJECTION MICROSCOPE.) |
| NF G07-076-1993 | 織物.纖維.羊毛縮水特性測定 | (TEXTILE. FIBRE. DETERMINATION OF COMPRESSION CHARACTERISTICS OF WASHED WOOL.) |
| NF G07-077-1995 | 紡織品.棉纖維.成熟度的空氣流動法評定 | (TEXTILES. COTTON FIBRES. EVALUATION OF MATURITY BY THE AIR FLOW METHOD. (EUROPEAN STANDARD EN ISO 10306).) |
| NF G07-079-1980 | 紡織.纖維試驗.用二次對比試驗退捻加捻測定纖維捻度 | (TEXTILES. TESTING THREADS. DETERMINING THE TWISTING OF THREADS BY UNTWISTING. RETWISTING WITH A DOUBLE RE-TEST.) |
| NF G07-080-1972 | 扁平棉纖維束斷裂韌性的測定方法 | (METHOD FOR DETERMINATION OF BREAKING TENACITY OF FLAT BUNDLES OF COTTON FIBERS.) |
| NF G07-087-1986 | 紡織.印染牢度試驗.標樣織物的規范:次醋酸纖維 | (TEXTILES. TESTS FOR COLOUR FASTNESS. SPECIFICATION FOR STANDARD ADJACENT FABRIC : SECONDARY ACETATE.) |
| NF G07-088-1986 | 紡織品.色牢度試驗.標準織物的規范:三醋酸纖維 | (Textiles. Tests for colour fastness. Specification for standard adjacent fabric : triacetate.) |
| NF G07-090-10-1990 | 紡織.色牢度的試驗.第10部分:貼襯織物規范:復型纖維(皮芯型纖維的組組合) | (TEXTILES. TESTS FOR COLOUR FATNESS. PART 10 : SPECIFICATION FOR ADJACENT FABRIC : MULTIFIBRE.) |
| NF G07-112-2-1999 | 織物.纖維破碎特性.第2部分:破碎強度和破碎膨脹測定的氣壓方法 | (TEXTILES. BURSTING PROPERTIES OF FABRICS. PART 2 : PNEUMATIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION. (EUROPEAN STANDARD EN ISO 13938-2).) |
| NF G07-168-1994 | 紡織品.編織纖維試驗.通過測量偏離角評定織物纏結 | (TEXTILE. TESTS FOR KNITTED FABRICS. EVALUATION OF SNARLING THROUGH MEASUREMENT OF THE STEP-ASIDE ANGLE.) |
| NF G07-169-1994 | 織物.編織纖維試驗.測定每單位長度和單位面積的針腳數 | (TEXTILES. TESTS FOR KNITTED FABRICS. DETERMINATION OF NUMBER OF STICHES PER UNIT LENGTH AND UNIT SURFACE.) |
| NF G07-175-1997 | 紡織品.紡織纖維作易燃性試驗前的家用洗滌方法 | (TEXTILES. DOMESTIC LAUNDERING PROCEDURES FOR TEXTILE FABRICS PRIOR TO FLAMMABILITY TESTING. (EUROPEAN STANDARD EN ISO 12138).) |
| NF G07-178-1-1999 | 織物.Martinadale法對纖維磨損抗性的測定.第1部分:磨損試驗裝置 | (TEXTILES. DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD. PART 1 : MARTINDALE ABRASION TESTING APPARATUS. (EUROPEAN STANDARD EN ISO 12947-1).) |
| NF G07-178-2-1999 | 織物.Martinadale法對纖維磨損抗性的測定.第2部分:破損樣品的測定 | (TEXTILES. DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD. PART 2 : DETERMINATION OF SPECIMEN BREAKDOWN. (EUROPEAN STANDARD EN ISO 12947-2).) |
| NF G07-178-3-1999 | 織物.Martinadale法對纖維磨損抗性的測定.第3部分:重量損失的測定 | (TEXTILES. DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD. PART 3 : DETERMINATION OF MASS LOSS. (EUROPEAN STANDARD EN ISO 12947-3).) |
| NF G07-178-4-1999 | 織物.Martinadale法對纖維磨損抗性的測定.第4部分:表面變化的評估 | (TEXTILES. DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD. PART 4 : ASSESSMENT OF APPEARANCE CHANGE. (EUROPEAN STANDARD EN ISO 12947-4).) |
| NF G07-307-1987 | 紡織.纖維試驗.羊毛纖維束斷裂強度的測定 | (TEXTILES. FIBRE TESTS. DETERMINATION OF THE BREAKING STRENGTH OF WOOL FIBRE BUNCHES.) |
| NF G07-309-1987 | 紡織.纖維試驗.棉花纖維的緊繃長度和均勻指數的測定 | (TEXTILES. FIBRE TESTS. DETERMINATION OF SPAN LENGTH AND UNIFORMITY INDEX OF COTTON FIBRES.) |
| NF G08-001-1-1987 | 紡織.纖維和紗線.發貨商品質量的測定.第1部分:質量的測定和計算 | (Textiles. Fibres and yarns. Determination of commercial mass of consignments. Part 1 : mass determination and calculations.) |
| NF G08-001-2-1987 | 紡織.纖維和紗線.發貨商品質量的測定.第2部分:實驗室樣品取法 | (Textiles. Fibres and yarns. Determination of commercial mass of consignments. Part 2 : methods for obtaining laboratory samples.) |
| NF G08-001-3-1987 | 紡織.纖維和紗線.發貨商品質量的測定.第3部分:樣品凈化規程 | (Textiles. Fibres and yarns. Determination of commercial mass of consignments. Part 3 : specimen cleaning procedures.) |
| NF G08-011-1987 | 紡織.纖維、紗、織物，服裝.批量檢驗用取樣方法 | (Textiles. Fibres, yarns, fabrics, clothes. Methods of sampling applicable to reception control of batches.) |
| NF G35-053-1998 | 編織地毯.用磨蝕機對羊毛纖維完整性的測定 | (Textile floor coverings. Determination of wool fibre integrity using an abrasion machine.) |
| NF G36-011-1995 | 通用纖維索.聚乙烯 | (Fibre ropes for general service. Polyethylene.) |
| NF G36-028-1974 | 繩索和繩索制品.船舶系纜用天然纖維繩索和人造纖維繩索間的等效值 | (ROPES AND CORDAGE. EQUIVALENCE BETWEEN NATURAL FIBRE ROPES AND MAN-MADE FIBRE ROPES FOR USE IN THE MOORING OF VESSELS.) |
| NF G36-030-1-2000 | 織物吊環.安全性.第1部分:水平編織吊帶.一般用途的人工纖維吊帶 | (Textiles slings - Safety - Part 1 : flat woven webbing slings, made of man-made fibres, for general purpose use.) |
| NF G36-030-2-2000 | 織物吊環.安全性.第2部分:圓形吊帶.一般用途的人工纖維吊帶 | (Textile slings - Safety - Part 2 : roundslings, made of man-made fibres, for general purpose use.) |
| NF G36-034-2-2001 | 道路車輛上的負載限制組件.安全性.第2部分:由人造纖維生產的織網繩 | (Load restraint assemblies on road vehicles - Safety - Part 2 : web lashing made from man-made fibres.) |
| NF G40-021-1975 | 從纖維整理到紡紗等工序和紡織機械的有關表格 | (TABLE RELATING TO OPERATIONS AND TEXTILE MACHINERY FROM THE PREPARATION TO THE SPINNING OF FIBRES.) |
| NF G41-005-1984 | 紡織工業設備及輔助裝置.紡紗器材.連續放線環、連續放線轉動罐.硬質纖維紡紗機 | (TEXTILE MACHINERY AND ALLIED MACHINERY AND ACCESSORIES. SPINNING MACHINES. RING SPINNING FRAME. POT SPINNING FRAMES. OPEN-END SPINNING MACHINES.) |
| NF H13-021-2000 | 纖維板鼓型桶.帶有封閉環的標稱容量為15-250升的可移動頭的鼓形桶 | (Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l.) |
| NF J95-046-1-2001 | 小型飛行器.殼的構造和建材尺寸.第1部分:材料.玻璃纖維增強參考層壓熱固樹脂 | (Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.) |
| NF L17-403-2002 | 航空航天系列.纖維增強塑料.未老化材料測試前整理的標準程序 | (Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials.) |
| NF L17-409-1998 | 航空航天系列.碳素纖維增強塑料.單向分層.垂直于纖維方向的拉伸試驗 | (Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.) |
| NF L17-410-1996 | 航空和航天.碳素纖維增強塑料.單向塑料層壓制品.纖維方向平行抗拉試驗 | (Aerospace series. Carbon fibre reinforced plastics. Unidirectioneal laminates. Tensile test parallel to the fibre direction.) |
| NF L17-413-1998 | 航空航天系列.碳素纖維層壓材料.纖維.樹脂和空隙量的測定 | (AEROSPACE SERIES. CARBON FIBRE LAMINATES. DETERMINATION OF THE FIBRE, RESIN AND VOID CONTENTS. (EUROPEAN STANDARD EN 2564).) |
| NF L17-420-1997 | 航天航空系列.碳纖維增強保混劑.每單位面積質量的測定(歐洲標準EN 2557) | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF MASS PER UNIT AREA. (EUROPEAN STANDARD EN 2557).) |
| NF L17-421-1997 | 航天航空系列.碳纖維增強保混劑.揮發性物質含量的測定(歐洲標準EN 2558) | (Aerospace series. Carbon fibre preimpregnates. Determination of the volatile content.) |
| NF L17-422-1997 | 航天航空系列.碳纖維增強保混劑.樹脂、纖維含量和每單位面積纖維質量的測定(歐洲標準EN 2559) | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2559).) |
| NF L17-454-1998 | 航空航天系列.預浸漬碳素纖維.樹脂流測定 | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2560).) |
| NF L17-458-1996 | 航空和航天.纖維增強塑料.試驗液體影響的測定 | (Aerospace series. Fibre reinforced plastics. Determination of the action of test fluids.) |
| NF L17-459-1996 | 航空和航天.纖維增強塑料.通過浸入測定吸水量 | (Aerospace series. Fibre reinforced plastics. Determination of water absorption by immersion.) |
| NF L17-700-1991 | 航空和航天系列.用玻璃纖維和夾層混合材料加固的層壓材料.試驗板的制作.(歐洲標準 EN 2374) | (Aerospace series. Glass fibre reinforced mouldings and sandwich composites. Production of test panels.) |
| NF L17-701-1989 | 航空和航空系列.玻璃纖維增強塑料.試驗方法表觀層間剪切力的測定 | (AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. TEST METHOD. DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH. (EUROPEAN STANDARD EN 2377).) |
| NF L17-703-1998 | 航空航天系列.玻璃纖維增強塑料.撓性試驗.三點彎曲試驗 | (Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.) |
| NF L17-704-1998 | 航空航天系列.玻璃纖維增強塑料.拉伸試驗 | (Aerospace series. Glass fibre reinforced plastics. Tensile test.) |
| NF L17-721-1993 | 航空航天系列.紡織玻璃纖維預浸漬.測定單位面積質量的試驗方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA. (EUROPEAN STANDARD EN 2329).) |
| NF L17-722-1993 | 航空航天系列.紡織玻璃纖維預浸漬.測定揮發物含量的試驗方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE CONTENT OF VOLATILE MATTER. (EUROPEAN STANDARD EN 2330).) |
| NF L17-723-1993 | 航空航天系列.紡織玻璃纖維預浸漬.測定樹脂和橡膠含量及單位面積纖維質量的試驗方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN AND FIBRE CONTENT AND MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2331).) |
| NF L17-724-1993 | 航空航天系列.紡織玻璃纖維預浸漬.測定樹脂流的試驗方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2332).) |
| NF L17-752-1992 | 航空航天系列.R-玻璃纖維束.產品標準.以標準RC14 160 P109為基礎的玻璃纖維束 | (AEROSPACE SERIES. R-GLASS ROVINGS. PRODUCT STANDARD. ROVINGS ON THE BASIS OF STRANDS RC14 160 P109.) |
| NF L17-781-1992 | 航空航天系列.纖維束.G起重性的測定 | (AEROSPACE SERIES. ROVINGS. DETERMINATION OF THE FUZZ.) |
| NF L17-916-1995 | 航空航天系列.降落傘纖維.扭編繩的試驗.錐形細紗球的數目的測定 | (AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF THE NUMBER OF YARN COPS.) |
| NF L17-917-1995 | 航空航天系列.降落傘纖維.扭編繩的試驗.網織品的檢測 | (AREOSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF MESHWORK.) |
| NF L17-918-1997 | 航空航天系列.降落傘纖維.扭編繩/編帶和窄幅織物的試驗.浸入冷水后尺寸變化的測定 | (AEROSPACE SERIES. PARACHUTE FABRIC. TESTS ON BRAIDED ROPES/BRAIDS AND NARROW FABRICS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER IMMERSION IN COLD WATER.) |
| NF L17-950-1995 | 航空工業.飛機結構纖維用合成纖維.試板的制備 | (AIRCRAFT INDUSTRY. SYNTHETIC CLOTHS FOR THE FABRIC OF AIRPLANE STRUCTURES. REALIZATION OF TEST PANELS.) |
| NF L17-951-1995 | 航空工業.飛機結構纖維用合成纖維.風化后機械特性的測定 | (Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the mechanical characteristics after weathering.) |
| NF L17-952-1995 | 航空工業.飛機結構纖維用合成纖維.漿紗并絞纖維粘結的剝離強度 | (Aircraft industry. Synthetic cloths for the fabric of airplane structures. Peeling strength of the bonding of taping fabric.) |
| NF L17-953-1995 | 航空工業.飛機結構纖維用合成織物.發貨時測定老化前后粘著保護的拉伸纖維的抗剪切強度 | (Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of shear sstrength by stretching cloths, in the delivery condition, stuck then protected before and after aging.) |
| NF L17-955-1995 | 飛機工業.飛機結構纖維用合成纖維.在發貨條件下纖維的透氣性和透濕性測量 | (Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the permeability-wettability of cloths in deliverry condition.) |
| NF L17-956-1995 | 航空工業.飛機結構纖維用合成纖維.在交貨條件下通過纖維的拉伸試驗測定在折斷狀態下的負荷和拉伸率及無涂層 | (Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the load and elongation at rupture by tensile testing of cloths in delivery condition and of free coated cloths.) |
| NF L19-031-1993 | 航空航天系列.管狀單元,六角形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-032-1993 | 航空航天系列.管狀單元,矩形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-033-1993 | 航空航天系列.管狀單元,撓性,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-037-1993 | 航空航天系列.管狀單元,六角形,碳纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL CARBON FABRIC, PHENOLIC RESIN IMPREGNATED ORIENTED AT PLUS OVER MINUS. PRODUCT STANDARD.) |
| NF L19-040-1993 | 航空航天系列.管狀單元,六角形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-041-1993 | 航空航天系列.管狀單元,矩形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-046-1993 | 航空航天系列.管狀單元,六角形,玻璃纖維,聚酰亞胺樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, POLYMIMIDE RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF M81-814-1989 | 礦用提升鋼絲繩.纖維組成.特性和試驗 | (STRANDED WIRE ROPES FOR MINE HOISTING. FIBRE COMPONENTS. CHARACTERISTICS AND TESTS.) |
| NF M87-243-1-2003 | 石油和天然氣工業.玻璃纖維增強塑料管.第1部分:詞匯、符號、應用和材料 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1 : vocabulary, symbols, applications and materials.) |
| NF M87-243-2-2003 | 石油和天然氣工業.玻璃纖維增強塑料管系.第2部分:合格鑒定和制造 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2 : qualification and manufacture.) |
| NF M87-243-3-2003 | 石油和天然氣工業.玻璃纖維增強塑料管系.第3部分:系統設計 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3 : system design.) |
| NF M87-243-4-2003 | 石油和天然氣工業.玻璃纖維增強塑料管系.第4部分:制造、安裝和運行 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4 : fabrication, installation and operation.) |
| NF M88-557-1-2003 | 地上用玻璃纖維增強塑料槽罐和容器.第1部分:原材料.規格條件和驗收條件 | (GRP tanks and vessels for use above ground - Part 1 : raw materials - Specification conditions and acceptance conditions.) |
| NF M88-558-2002 | 地面儲存冷水用單壁截面結構玻璃纖維增強式水箱的規范 | (Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water.) |
| NF P15-202-1-1993 | 建筑工程.具有粘合劑的多孔礦物纖維覆蓋物.第1部分:技術規范 | (DTU 27-1. BUILDING WORKS. COVERINGS FROM BLOWN-OUT MINERAL FIBRES WITH BINDER. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P15-202-2-1993 | 建筑工程.私人合同.具有粘合料的多孔礦物纖維覆蓋層.第2部分:特別條款 | (DTU 27-1. BUILDING WORKS. PRIVATE CONTRACTS. COVERINGS FROM BLOWN-OUT MINERAL FIBRES WITH BINDER. PART 2 : SPECIAL CLAUSES.) |
| NF P16-304-1997 | 地下排水管道用纖維水泥管.第1部分:重力循環系統用管子、接頭和配件(歐洲標準EN 588-1) | (Fibre-cement pipes for sewers and drains. Part 1 : pipes, joints and fittings for gravity systems.) |
| NF P16-304-2-2002 | 排水管和下水道用纖維水泥管.第2部分:人孔和檢查室 | (Fibre-cement pipes for drains and sewers - Part 2 : manholes and inspection chambers.) |
| NF P16-306-2000 | 建筑物排放系統的纖維混凝土管線和配件.交貨的尺寸和技術條款 | (Fibre-cement pipes and fiftings for discharge systems for buildings - Dimensions and technical terms of delivery.) |
| NF P19-828-1999 | 預制混凝土制品.玻璃纖維增強水泥的工廠生產控制的一般規則 | (Precast concrete products - General rules for factory production control of glass-fibre reinforced cement.) |
| NF P19-829-2-1998 | 預制混凝土產品.玻璃增強混凝土的試驗方法.新GRC清洗出法對纖維含量的測定 | (Precast concrete products. Test method for glass-fibre reinforced cement. Part 2 : measuring the fibre content in fresh GRC, “Wash out test“.) |
| NF P19-829-3-1998 | 預制混凝土產品.玻璃增強混凝土的試驗方法.噴霧GRC纖維含量的測定 | (Precast concrete products. Test method for glass-fibre reinforced cement. Part 3 : measuring the fibre content of sprayed GRC.) |
| NF P19-829-5-1998 | 預制混凝土產品.玻璃纖維增強水泥的試驗方法.第5部分:彎曲強度的試驗.完全彎曲試驗方法 | (Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, “Complete bending test“ method.) |
| NF P19-829-6-1998 | 預制混凝土產品.玻璃纖維增強水泥的試驗方法.第6部分:干密度測定和浸入法水吸收的測定 | (Precast concrete products. Test method for glass-fibre reinforced cement. Part 6 : determination of the absorption of water by immersion and determination of the dry density.) |
| NF P24-504-2000 | 未增塑聚氯乙烯纖維門窗的外形.耐人工氣候老化性測定 | (Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering.) |
| NF P30-303-1998 | 建筑物覆蓋物.纖維混凝土屋頂擠壓膠合板密封帶材.規范.試驗 | (Building covering. Extruded mastic sealing strips for fibre-cement roofing. Specifications. Tests.) |
| NF P33-301-1994 | 屋頂用纖維水泥成型板材和配件.產品規范和試驗方法 | (Fibre-cement profiled sheets and fittings for roofing. Product specification and test methods.) |
| NF P33-302-1994 | 屋頂用纖維水泥石板及其配件.產品規范和試驗方法 | (Fibre-cement slates and their fitting for roofing. Product specification and test methods.) |
| NF P33-401-2001 | 纖維水泥平板.產品規范和試驗方法 | (Fibre-cement flat sheets - Product specifications and test methods.) |
| NF P37-417-1993 | 屋頂和蓋板.與屋頂薄板連接的部件.用帶豎立構件的玻璃纖維增強聚酯做的底層.定義..規范.試驗方法 | (ROOFING AND CLADDING. PARTS JOINED TO A ROOF SHEETING. BASES MADE OF GLASS FIBLRE REINFORCED POLYESTER WITH UPSTAND. DEFINITION, SPECIFICATIONS, TEST METHODS.) |
| NF P38-301-2-1999 | 單層屋頂用透光異型塑料板.第2部分:玻璃纖維增強聚酯板試驗方法和特殊要求 | (Light transmitting profiled plastic sheeting for single skin roofing. Part 2 : specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP).) |
| NF P38-402-1985 | 屋頂和護板.塑料.玻璃纖維增強半透明聚酯加肋板.尺寸特性 | (TRANSLUCENT GLASS FIBRE REINFORCED RIBBED POLYESTER SHEETS. DIMENSIONAL CHARACTERISTICS.) |
| NF P38-403-1983 | 玻璃纖維增強聚酯半透明波形板.尺寸特性 | (TRANSLUCENT GLASS-FIBER REINFORCED POLYESTER CORRUGATED SHEETS. DIMENSIONAL CHARACTERISTICS.) |
| NF P38-504-1984 | 玻璃纖維增強聚酯波形板或加肋板.分布荷載靜力彎曲試驗 | (GLASS FIBRE REINFROCED CORRUGATED OR RIBBED POLYESTER SHEETS. STATIC DEFLECTION TESTS UNDER DISTRIBUTED LOAD.) |
| NF P39-301-1979 | 稱作纖維瀝青板的纖維毛氈增強瀝青蓋板.規范 | (SHINGLES OF CELLULOSIC FIBRE REINFORCED BITUMEN FELT,DESIGNATED “CELLULOSE BASED BITUMEN SHINGLES“. SPECIFICATIONS.) |
| NF P41-302-1994 | 纖維水泥制品.壓力管道和接頭(歐洲標準EN 512) | (Fibre-cement products. Pressure pipes and joints.) |
| NF P41-302/A1-2002 | 纖維混凝土制品.壓力管和連接件 | (Fibre-cement products - Pressure pipes and joints.) |
| NF P41-305-2001 | 纖維水泥管.敷設和現場施工指南 | (Fibre-cement pipelines - Guide for laying and on-site work practices.) |
| NF P72-203-1/A1-2003 | DTU 25.41.建筑工程.石膏纖維板施工.石膏墻板.第1部分:技術規范 | (DTU 25.41 - Building works - Gypsum plasterboard works - Gypsum wallboards - Part 1 : technical specifications.) |
| NF P72-203-2/A1-2003 | DTU 25.41.建筑工程.私人合同.石膏纖維板施工.石膏墻板.第2部分:特殊條款 | (DTU 25.41 - Building works - Private contracts - Gypsum plasterboard works - Gypsum wallboards - Part 2 : special clauses.) |
| NF P73-201-1-1994 | DTU 25-51.建筑工程.纖維灰漿和粉飾灰泥頂板.第1部分:技術規范 | (DTU 25-51. BUILDING WORKS. FIBROUS GYPSUM PLASTERWORK CEILINGS. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P73-201-2-1994 | DTU25-51.建筑工程.私人合同.纖維狀石膏天花板.第2部分:特殊條款 | (DTU 25-51. BUILDING WORKS. PRIVATE CONTRACTS. FIBROUS GYPSUM PLASTERWORK CEILINGS. PART 2 : SPECIAL CLAUSES.) |
| NF P73-301-1991 | 纖維灰漿和粉飾灰泥.纖維灰漿構件.裝飾用板和構件 | (Fibrous plasterwork. Flat elements, shaped elements.) |
| NF P75-412-2002 | 建筑物用的絕熱制品.工廠制作的木纖維(WF)膨脹的珍珠巖產品.規范 | (Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification.) |
| NF P75-422-2003 | 建筑設施用隔熱產品.測定玻璃纖維網狀物的機械特性 | (Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes.) |
| NF Q01-007-1977 | 紙張和紙板.纖維成分名稱術語 | (PAPER AND BOARD.NOMENCLATURE FOR THE NAMES RELATING TO FIBRE COMPOSITION.) |
| NF Q03-033-1994 | 單面和單壁瓦楞纖維紙板耐壓力的測定 | (Single-faced and single-wall corrugated fibreboard. Determination of flat crush resistance.) |
| NF Q03-041-1996 | 瓦楞纖維板.邊緣耐壓碎性的測定 | (Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method).) |
| NF Q03-068-1982 | 紙張和紙板試驗.棉織物(纖維棉)和皺紋紙浸泡吸水性法定 | (PAPER AND BOARD TESTS. DETERMINATION OF ABSORPTION BY IMMERSION OF SOFT TISSUE AND CREPE PAPER.) |
| NF Q03-072-1984 | 紙張和紙板試驗.棉織物(纖維棉)和皺紋紙、印刷紙、顏色紙物件油墨和顏色含量的測定 | (PAPER AND BOARD. TESTS FOR PAPER AND BOARD. DETERMINATION OF INKE AND DYE CONTENT OF PRINTED DYED OR COLOURED ARTICLES MADE OF SOFT TISSUE (CELLUCOTTON) AND CREPE PAPER.) |
| NF Q12-009-1993 | 紙和紙板.瓦楞纖維板.包裝用三重內壁纖維瓦楞板 | (PAPER AND BOARD. CORRUGATED FIBER BOARD. CHARACTERISTICS OF TRIPLE WALL CORRUGATED FIBER BOARD FOR PACKAGING.) |
| NF Q50-012-1983 | 纖維素.測量紙漿蘭色中的漫反射率 | (Cellulose. Measurement of diffuse blue reflectance factor of pulps.) |
| NF T03-400-1997 | 合成礦物纖維.在鼠肺中持續時間的測定.吸入試驗 | (SYNTHETIC MINERAL FIBRES. DETERMINATION OF PULMONARY BIOPERSISTENCE IN THE RAT. INHALATION TEST.) |
| NF T03-410-1998 | 建筑結構爆破用合成礦物纖維.實驗室條件下的可溶性.試驗方法 | (SYNTHETIC MINERAL FIBERS FOR BLASTING IN BUILDING CONSTRUCTION. IN VITRO SOLUBILITY. TEST METHOD.) |
| NF T12-013-1961 | 纖維素紙漿.在72％硫酸中不溶性的測定 | (CELLULOSE. CELLULOSE PULPS. DETERMINATION OF INSOLUBLES IN 72 PER CENT SULPHURIC ACID.) |
| NF T12-014-1961 | 纖維素.植物原料.在７２％硫酸中不溶性的測定 | (CELLULOSE. PLANT RAW MATERIALS. DETERMINATION OF INSOLUBLES IN 72 PER CENT SULPHURIC ACID.) |
| NF T12-023-1982 | 纖維素.鈣含量的測定.乙二胺四乙酸滴定法和火焰原子吸收光譜測定法 | (Cellulose. Determination of the calcium content. Edta titrimetric method and flame atomic absorption spectrometric method.) |
| NF T12-029-1982 | 纖維素.錳含量的測定.高碘酸鈉分光光度法和火焰原子吸收分光光度法 | (Cellulose. Determination of the manganese content. Sodium periodate photometric method and flame atomic absorption spectrometric method.) |
| NF T25-001-1995 | 增強纖維.標準批量取樣法 | (Reinforced fibres. Sampling plans applicable to received batches.) |
| NF T25-008-2001 | 塑料.增強纖維.短切原絲.松密度的測定 | (Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density.) |
| NF T25-010-1997 | 增強纖維.機織織物.規范基礎 | (Reinforcement fibres - Woven fabrics - Basis for a specification.) |
| NF T25-100-2003 | 碳纖維.密度的測定 | (Carbon fibre - Determination of density.) |
| NF T25-101-1986 | 碳纖維.碳纖維浸漬長絲紗的拉伸試驗 | (CARBON FIBERS. CARBON FIBRE FILAMENT YARN TENSILE TEST.) |
| NF T25-102-1997 | 碳纖維.單絲樣品抗拉性能的測定 | (CARBON FIBRE. DETERMINATION OF THE TENSILE PROPERTIES OF SINGLE-FILAMENT SPECIMENS.) |
| NF T25-103-1987 | 碳纖維.線密度的測定 | (Carbon fibers. Determination of linear density.) |
| NF T25-104-1996 | 碳纖維.尺寸的測定 | (Carbon fibre. Determination of size content.) |
| NF T25-110-2-1999 | 碳纖維紗.第2部分:試驗方法和總規范 | (CARBON FIBRE YARNS. PART 2 : TEST METHODS AND GENERAL SPECIFICATIONS. (EUROPEAN STANDARD EN 13002-2).) |
| NF T25-202-1999 | 增強紡織纖維.織物.單位長度經紗和緯紗的紗數的測定 | (REINFORCEMENTS. WOVEN FABRICS. DETERMINATION OF NUMBER OF YARNS PER UNIT LENGTH OF WARP AND WELT.) |
| NF T25-206-1-2001 | 增強材料.多軸多股纖維織物規范.第1部分:名稱與符號 | (Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1 : designation.) |
| NF T25-206-2-2001 | 增強材料.多軸多股纖維織物規范.第2部分:試驗方法和一般要求 | (Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2 : methods of test and general requirements.) |
| NF T25-206-3-2001 | 增強材料.多軸多股纖維織物規范.第3部分:特殊要求 | (Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3 : specific requirements.) |
| NF T25-409-1-1999 | 對芳族聚酰胺纖維長紗線.第1部分:名稱與符號 | (PARA-ARAMID FIBRE FILAMENT YARNS. PART 1 : DESIGNATION. (EUROPEAN STANDARD EN 13003-1).) |
| NF T25-409-2-1999 | 對芳族聚酰胺纖維長紗線.第2部分:試驗方法和總規范 | (PARA-ARAMID FIBRE FILAMENT YARNS. PART 2 : METHODS OF TEST AND GENERAL SPECIFICATIONS. (EUROPEAN STANDARD EN 13003-2).) |
| NF T25-409-3-1999 | 對芳族聚酰胺纖維長紗線.第3部分:技術規范 | (PARA-ARAMID FIBRE FILAMENT YARNS. PART 3 : TECHNICAL SPECIFICATIONS. (EUROPEAN STANDARD EN 13003-3).) |
| NF T25-715-2003 | 高級工業陶瓷.陶瓷復合材料.增強纖維的試驗方法.第5部分:室溫下復絲束中長絲拉伸強度分布和斷裂時拉伸應變 | (Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5 : determination of distribution of tensile strength and of tensile strain to failure of filaments within) |
| NF T47-106-1988 | 合成纖維骨架輸送帶.抗張強度和伸長率.規范和試驗方法 | (CONVEYOR BELTS WITH ARAMIDE CARCASSE. TENSILE STRENGTH AND ELONGATIONS. SPECIFICATIONS AND METHODS OF TEST.) |
| NF T50-062-2-2002 | 塑料.可比單點數據的采集和表示法.第2部分:長纖維增強塑料 | (Plastics - Acquisition and presentation of comparable single-point data - Part 2 : long-fibre-reinforced plastics.) |
| NF T51-005-3-1996 | 塑料.載荷下偏轉溫度的測定.第3部分:高強度熱固性疊層板和長纖維增強塑料 | (Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics.) |
| NF T51-034-4-1997 | 塑料.抗拉性能的測定.第4部分:正交同性和正交異性纖維增強塑料復合材料的試驗條件.(歐洲標準EN ISO 527-4) | (Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.) |
| NF T51-034-5-1997 | 塑料.抗拉性能的測定.第5部分:單向纖維增強塑料復合材料的試驗條件(歐洲標準EN ISO 527-5) | (Plastics. Determination of tensile properties. Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.) |
| NF T51-143-1974 | 塑料.聚酰胺載體.石墨碳黑和玻璃纖維成分的測定 | (PLASTICS. FILLED POLYAMIDES. DETERMINATION OF PERCENTAGES OF GRAPHITE OR CARBON BLACK AND FIBER GLASS.) |
| NF T51-144-1974 | 塑料.填充聚酰胺.二硫化鉬和玻璃纖維百分比的測定 | (FILLED POLYAMIDES. DETERMINATION OF PERCENTAGES OF MOLYBDENE BISULFIDE AND FIBER GLASS.) |
| NF T51-351-1985 | 塑料.灰分比率的測定.未增塑醋酸纖維素 | (Plastics. Determination of ash. Unplasticized cellulose acetate.) |
| NF T51-352-1999 | 塑料.未增塑的醋酸纖維素.游離酸度的測定 | (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF FREE ACIDITY. (EUROPEAN STANDARD EN ISO 1061).) |
| NF T51-356-1999 | 塑料.非增塑的醋酸纖維素.水分含量的測定 | (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF MOISTURE CONTENT. (EUROPEAN STANDARD EN ISO 585).) |
| NF T51-357-1999 | 塑料.醋酸纖維素.模塑時粘度降低的測定 | (PLASTICS. CELLULOSE ACETATE. DETERMINATION OF VISCOSITY LOSS ON MOULDING. (EUROPEAN STANDARD EN ISO 1599).) |
| NF T51-358-1999 | 塑料.醋酸纖維素.利用加熱的不同時期在模制樣品生產時光吸收量的測定 | (PLASTICS. CELLULOSE ACETATE. DETERMINATION OF LIGHT ABSORPTION ON MOULDED SPECIMENS PRODUCED USING DIFFERENT PERIODS OF HEATING. (EUROPEAN STANDARD EN ISO 1600).) |
| NF T57-103-2000 | 纖維增強塑料復合材料.平面方向壓縮性的測定 | (Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction.) |
| NF T57-105-1998 | 纖維增強塑料復合材料.撓性性能的測定 | (Fibre-reinforced plastic composites - Determination of flexural properties.) |
| NF T57-153-1-2002 | 纖維增強塑料.試驗板的制備方法.第1部分:通用條件 | (Fibre-reinforced plastics - Methods of producing test plates - Part 1 : general conditions.) |
| NF T57-153-2-2002 | 纖維增強塑料.試驗板的生產方法.第2部分:接觸模壓法和噴射成形法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 2 : contact and spray-up moulding.) |
| NF T57-153-3-2002 | 纖維增強塑料.試驗板的生產方法.第3部分:濕壓縮模塑法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 3 : wet compression moulding.) |
| NF T57-153-5-2002 | 纖維增強塑料.試驗板的生產方法.第5部分:長纖維卷繞法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 5 : filament winding.) |
| NF T57-153-6-2003 | 纖維增強塑料.試驗用板材的生產方法.第6部分:擠拉模塑法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 6 : pultrusion moulding.) |
| NF T57-153-7-2002 | 纖維增強塑料.試驗板的生產方法.第7部分:樹脂壓鑄法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 7 : resin transfer moulding.) |
| NF T57-153-9-2003 | 纖維增強塑料.試驗板的制備方法.第9部分:GMT/STC模制 | (Fibre-reinforced plastics - Methods of producing test plates - Part 9 : moulding of GMT/STC.) |
| NF T57-155-1998 | 塑料.熱塑鑄模化合物.SMC中纖維濕氣級別測定 | (Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC.) |
| NF T57-156-1998 | 塑料.纖維增強化合物.SMC、BMC和DMC壓縮鑄模試驗板的制備 | (Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC.) |
| NF T57-210-1994 | 塑料管道系統.玻璃纖維增強塑料部件.用重力法測定組分用量 | (Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method.) |
| NF T57-217-1996 | 塑料管道系統.玻璃纖維增強熱固性塑料管.潮濕條件下蠕變因子的測定和長期指定環的硬度的計算 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness.) |
| NF T57-218-1996 | 塑料管道系統.玻璃纖維增強熱固塑料(GFK).檢驗原有環撓曲的試驗方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection.) |
| NF T57-220-1996 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管.測定指定環初始硬度 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.) |
| NF T57-221-1996 | 塑料管道系統.玻璃纖維增強熱固塑料管和配件.短期內部壓力下管壁密封性的檢驗的試驗方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure.) |
| NF T57-222-1996 | 塑料管道系統.玻璃纖維增強熱固塑料管.初始縱向拉伸性能的測定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties.) |
| NF T57-224-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)構件.檢驗帶有彈性密封件的剛性鎖定的管套筒接頭設計的試驗方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.) |
| NF T57-225-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料元件.驗證膠合管套筒接頭設計的測試方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.) |
| NF T57-229-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料管.在化學環境下存放后相對彎曲蠕變系數的測定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.) |
| NF T57-303-1989 | 塑料.碳纖維增強復合材料.層間剪切應力的測定.短跨距彎曲的方法 | (PLASTICS. CARBON REINFORCED COMPOSITES. DETERMINATION OF INTERLAMINAR SHEAR STRENGTH. FLEXURE METHOD WITH SHORT SPAN LENGHT.) |
| NF T57-404-2002 | 纖維增強塑料復合材料.無定向性增強材料的模型I層間斷裂韌度G | (Fibre-reinforced composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials.) |
| NF T57-502-1995 | 增強纖維.玻璃纖維.丙酮中溶解物百分率的測量.燒瓶法 | (Reinforcement fibres. Glass fibre. Measurement of the percentage of soluble sizing in acetone. Flask method.) |
| NF T57-608-1999 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量的測定.溶解方法 | (Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforced-fibre and mineral-filler content. Dissolution methods.) |
| NF T57-615-1997 | 纖維增強塑料.熱固模塑混合物和預浸料.流動性和貯藏壽命的測定(歐洲標準EN ISO 12115) | (FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF FLOWABILITY AND SHELF LIFE. (EUROPEAN STANDARD EN ISO 12115).) |
| NF T57-901-1997 | 玻璃纖維增強塑料(GRP)制地下油罐.單面處于液體環境的試驗方法 | (Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids.) |
| NF T57-902-1997 | 玻璃纖維增強塑料(GRP)制地下油罐.系數α和β的測定 | (Underground tanks of glass-reinforced plastics (GRP). Determination of factor alpha and factor beta.) |
| NF V03-003-2001 | 食品.照射食品中纖維素含量的探測.ESR的光譜色譜分析法 | (Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy.) |
| NF V03-040-1993 | 農產食品.粗纖維含量的測定.通用方法 | (Agricultural food products. Determination of crude fibre. General method.) |
| NF V03-041-1981 | 農產食品.粗纖維含量的測定.改進的Scharrer方法 | (Agricultural food products. Determination of crude fibre. Modified scharrer method.) |
| NF V18-099-2002 | 動物飼料.粗纖維含量測定.中間過濾法 | (Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration.) |
| NF X41-600-1971 | 纖維素織物（天然或合成）抗微生物侵蝕的試驗子和菌絲混合培植法 | (TESTS FOR THE RESISTANCE TO MICRO-ORGANISMS OF NATURAL OR ARTIFICIAL CELLULOSE TEXTILES. METHOD BY MIXED INOCULATION (SPORES/MYCELLIUM).) |
| NF X41-601-1-2001 | 紡織品.含纖維素織物對微生物耐性的測定.土壤埋試驗.第1部分:腐爛延遲完成的評價 | (Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1 : assessment of rot-retardant finishing.) |
| NF X41-602-1971 | 纖維素織物（天然或合成）抗微生物侵蝕的試驗.置于熱室中 | (TESTS FOR THE RESISTANCE TO MICRO-ORGANISMS OF NATURAL OR ARTIFICIAL CELLULOSE TEXTILES. EXPOSURE IN A CHAMBER WITH TROPICAL ATMOSPHERE.) |
| NF X41-603-1976 | 紡織品的防護.航海用天然纖維繩纜抗微生物侵蝕的試驗方法 | (PROTECTION OF TEXTILES. METHOD OF TEST FOR THE RESISTANCE TO MICROORGANISMS OF NATURAL FIBRE ROPES AND CORDAGE INTENTED FOR MARINE USE.) |
| NF X43-050-1996 | 空氣質量.用電子顯微鏡傳送法測定石棉纖維的濃度.間接法 | (Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.) |
| P15-202-1993 | DTU 27-1.建筑工程.帶膠粘劑的防噴礦物纖維制成的覆面.第1部分:技術規范.第2部分:特別條款 | (DTU 27-1. Building works. Coverings from blown-out mineral fibres with binder. Part 1 : technical specifications - Part 2 : special clauses.) |
| XP P 30-311-1997 | 屋頂.固定件.組件抗性測定.皺狀纖維混凝土.拉力負荷測定的測試方法 | (ROOFING. FASTENERS. DETERMINATION OF THE CHARACTERISTIC RESISTANCE OF THE ASSEMBLY. CORRUGATED FIBRE CIMENT. TEST METHOD TO DETERMINE PULL-OVER LOAD.) |
| 編號 | 中文名稱 | 英文名稱 |