| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60317-0-4 AMD 2-2005 | 特種繞組線規范 第0-4部分:一般要求.玻璃纖維繞組浸樹脂或浸清漆裸扁銅線或漆包扁銅線.修改件2 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire; Amendment 2 |
| IEC 60317-0-4 Edition 2.1-2000 | 繞組線特殊類型規范.第0-4部分:一般要求.玻璃纖維纏繞的樹脂或清漆浸漬的,裸露或瓷漆的矩形銅線 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| IEC 60317-0-4 Edition 2.2-2006 | 特種繞組線規范.第0-4部分:一般要求.玻璃纖維繞組樹脂或清漆浸漬裸銅線或漆包扁銅線 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| IEC 60317-0-4-1997 | 特種繞組線規范.第0部分:一般要求.第4節:玻璃纖維繞組樹脂或清漆浸漬裸銅線或漆包扁銅線 | Specifications for particular types of winding wires - Part 0: General requirements - Section 4: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| IEC 60317-31 AMD 2-2005 | 特種繞組線規范.第31部分:溫度指數180、玻璃纖維繞組聚酯或聚酯酰亞胺浸漬的裸或漆包扁銅線.修改件2 | Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180; Amendment 2 |
| IEC 60317-32 AMD 2-2005 | 特種繞組線規范.第32部分:溫度指數155、玻璃纖維繞組樹脂或清漆浸漬的、裸或漆包扁銅線.修改件2 | Specifications for particular types of winding wires - Part 32: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155; Amendment 2 |
| IEC 60317-33 AMD 2-2005 | 特種繞組線規范.第33部分:溫度指數200、玻璃纖維繞組樹脂或清漆浸漬的、裸或漆包扁銅線.修改件2 | Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200; Amendment 2 |
| IEC 60317-39 AMD 2-2005 | 特種繞組線規范.第39部分:溫度指數180、玻璃纖維聚酯或清漆浸漬的裸或漆包扁銅線.修改件2 | Specifications for particular types of winding wires - Part 39: Glass-fibre resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180; Amendment 2 |
| IEC 60317-40 AMD 2-2005 | 特種繞組線規范.第40部分:溫度指數200、玻璃纖維編織樹脂或清漆浸漬的、裸或漆包扁銅線.修改件2 | Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200; Amendment 2 |
| IEC 60450 Edition 2.1-2007 | 新的和老化的纖維質電絕緣材料平均粘滯聚合度的測量 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| IEC 60450-2004 | 新的和老化的纖維素電氣絕緣材料的粘均聚合度的測量 | Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials |
| IEC 60454-3-10-1995 | 電工用壓敏粘帶 第3部分:單項材料規范 活頁10:涂橡膠熱固性粘合劑的乙酸丁酸纖維素薄膜膠粘帶的要求 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specification for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive |
| IEC 60454-3-11-2007 | 電工用壓敏粘帶.第3部分:單項材料規范.活頁11:帶玻璃長絲、纖維素皺紋紙、聚酯非織布、環氧樹脂和壓敏粘合 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive |
| IEC 60454-3-4-2007 | 電工用壓敏粘帶.第3部分:單項材料規范.活頁4:帶橡膠熱固性粘合劑的纖維素皺紋紙和非皺紋紙 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
| IEC 60454-3-8-2006 | 電工用壓敏膠粘帶.第3部分:單項材料規范.活頁8:涂有基于玻璃纖維、醋酯纖維素或組合有粘膠纖維的壓敏膠粘劑 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre |
| IEC 60554-1 AMD 1-1983 | 電工用纖維素紙規范 第1部分:定義和一般要求 修改1 | Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements |
| IEC 60554-1 Erratum 1-1979 | 電工用纖維素紙規范.第1部分:定義和一般要求 | Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements |
| IEC 60554-1-1977 | 電工用纖維素紙規范 第1部分:定義和一般要求 | Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements |
| IEC 60554-2-2001 | 電工用纖維素紙 第2部分：試驗方法 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| IEC 60554-3-1-1979 | 電工用纖維素紙規范 第3部分:單項材料規范 活頁1:通用電工用紙 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 1: General purpose electrical paper |
| IEC 60554-3-2-1983 | 電工用纖維素紙規范 第3部分:單項材料規范 活頁2:電容器紙 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 2: Capacitor paper |
| IEC 60554-3-3-1980 | 電工用纖維素紙規范 第3部分:單項材料規范 活頁3:皺紋紙 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 3: Crepe paper |
| IEC 60554-3-4-1979 | 電工用纖維素紙規范 第3部分:單項材料規范 活頁4:電解電容器紙 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 4: Electrolytic capacitor paper |
| IEC 60554-3-5-1984 | 電工用纖維素紙規范 第3部分:單項材料規范 活頁5:特殊用途紙 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 5: Special papers |
| IEC 60684-3-300-2002 | 絕緣軟管.第3部分:各種型號軟管規范.第300篇:無涂層的玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated |
| IEC 60684-3-343 to 345-2002 | 絕緣軟管.第3部分:各種型號軟管規范.第343至345篇:無涂層可擴張編織的乙烯三氟氯乙烯纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated |
| IEC 60684-3-400 to 402-2002 | 絕緣軟管.第3部分:各種型號軟管規范.第400至402篇:硅彈性玻璃纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating |
| IEC 60684-3-406 to 408-2003 | 絕緣軟套管.第3部分:各種型號套管的規范要求.第406至408活頁:PVC涂覆層的玻璃纖維編織套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 406 to 408: Glass textile sleeving with PVC coating |
| IEC 60684-3-409-1999 | 絕緣軟管 第3部分:各種型號軟管的規范 活頁409:聚胺酯(PUR)涂覆層的玻璃纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating |
| IEC 60793-1-20-2001 | 光纖 第1-20部分：測量方法和試驗規程 纖維幾何結構 | Optical fibres - Part 1-20: Measurement methods and test procedures; Fibre geometry |
| IEC 60793-1-30-2001 | 光纖 第1-30部分：測量方法和試驗規程 纖維驗證試驗 | Optical fibres - Part 1-30: Measurement methods and test procedures; Fibre proof test |
| IEC 60793-1-34-2006 | 光學纖維.第1-34:部分:測量方法和試驗程序.纖維卷曲 | Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl |
| IEC 60793-1-41-2003 | 光學纖維.第1-41部分:測量方法和試驗程序.頻帶寬度 | Optical fibres - Part 1-41: Measurement methods and test procedures; Bandwidth |
| IEC 60793-1-49-2006 | 光學纖維.第1-49部分:測量方法和試驗程序.差分模延遲 | Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay |
| IEC 60793-1-54-2003 | 光學纖維.第1-54部分:測量方法和試驗規程.Υ幅射 | Optical fibres - Part 1-54: Measurement methods and test procedures; Gamma irradiation |
| IEC 60793-2-10-2007 | 光纖.第2-10部分:產品規范.A1類多模纖維用分規范 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| IEC 60793-2-20-2007 | 光纖.第2-20部分:產品規范.A2類多模纖維的分規范 | Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres |
| IEC 60793-2-30-2007 | 光纖.第2-30部分:產品規范.A3類多模纖維用分規范 | Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres |
| IEC 60793-2-40-2006 | 光學纖維.第2-40部分:產品規范.A4類多模纖維的分規范 | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
| IEC 60793-2-50-2004 | 光學纖維.第2-50部分:產品規范.B級單模光纖分規范 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 60794-1-2-2003 | 光學纖維電纜.第1-2部分:總規范.基礎光纜試驗規程 | Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures |
| IEC 60794-3-10-2002 | 光學纖維電纜.第3-10部分:戶外電纜.管道光纜和直埋通信光纜的系列規范 | Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables |
| IEC 60819-1 AMD 1-1996 | 電工用非纖維素紙 第1部分:定義和一般要求 修改1 | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements; Amendment 1 |
| IEC 60819-1-1995 | 電工用非纖維素紙 第1部分:定義和一般要求 | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements |
| IEC 60819-2-2001 | 電工用非纖維素紙 第2部分：試驗方法 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test |
| IEC 60819-3-1-2001 | 電工用非纖維素紙 第3部分：?jiǎn)雾?xiàng)材料規范 活頁1：填充玻璃紙 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Filled glass paper |
| IEC 60819-3-2-2001 | 電工用非纖維素紙 第3部分：?jiǎn)雾?xiàng)材料規范 活頁2：混合無機 有機紙 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Hybrid inorganic-organic paper |
| IEC 60819-3-3-2006 | 電工用非纖維素紙.第3部分:單項材料規范.活頁3:非填充聚芳酰胺紙 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers |
| IEC 60819-3-4-2001 | 電工用非纖維素紙 第3部分：?jiǎn)雾?xiàng)材料規范 活頁4：含有不多于50%云母顆粒的芳族聚酰胺纖維紙 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles |
| IEC 60869-1-1999 | 纖維光學衰減器 第1部分:總規范 | Fibre optic attenuators - Part 1: Generic specification |
| IEC 60875-1-2000 | 纖維光學分路器 第1部分:總規范 | Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
| IEC 60876-1-2001 | 纖維光學空間開關 總規范 | Fibre optic spatial switches - Part 1: Generic specification |
| IEC 61067-1-1991 | 玻璃和玻璃聚酯纖維編織帶規范 第1部分:定義、分類和一般要求 | Specification for glass and glass polyester fibre woven tapes; part 1: definitions, classification and general requirements |
| IEC 61067-2-1992 | 玻璃和玻璃聚酯纖維編織帶規范 第2部分:試驗方法 | Specification for glass and glass polyester fibre woven tapes; part 2: methods of test |
| IEC 61067-3-1-1995 | 玻璃和玻璃聚酯纖維編織帶 第3部分:單項材料規范 活頁1:1、2、3型織帶 | Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes |
| IEC 61068-1-1991 | 聚酯纖維機織帶規范 第1部分:定義、名稱和一般要求 | Specification for polyester fibre woven tapes; part 1: definitions, designation and general requirements |
| IEC 61068-2-1991 | 聚酯纖維編織帶規范 第2部分:試驗方法 | Specification for polyester fibre woven tapes; part 2: methods of test |
| IEC 61068-3-1 Corrigendum 1-1998 | 聚酯纖維編織帶.第3部分:單項材料規范.活頁1:常規織機或無梭織機編織的帶 | Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms |
| IEC 61068-3-1-1995 | 聚酯纖維編織帶 第3部分:單項材料規范 活頁1:常規織機或無梭織機編織的帶 | Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms |
| IEC 61197-1993 | 絕緣液體 直線火焰蔓延 使用玻璃纖維帶的試驗方法 | Insulating liquids; linear flame propagation; test method using a glass-fibre tape |
| IEC 61202-1-2000 | 纖維光學隔離器 第1部分:總規范 | Fibre optic isolators - Part 1: Generic specification |
| IEC 61249-2-1-2005 | 印制板和其它互連結構用材料.第2-1部分:包被和非包被增強基材.酚醛纖維素紙?jiān)鰪?qiáng)銅包被經濟疊層板 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
| IEC 61249-2-10-2003 | 印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.規定了易燃性的包銅改良或未改良的氰酸酯溴 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad; Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-11-2003 | 印制板和其他互聯結構用材料.第2-11部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化 | Materials for printed boards and other interconnection structures - Part 2-11: Reinforced base materials, clad and unclad; Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-18-2002 | 印制板和其它互連結構用材料.第2-18部分:包被或非包被增強基材.規定了易燃性的覆銅非編織玻璃纖維增強層壓 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad; Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-19-2001 | 印制版和其他互連結構件用材料 第2-19部分：包被和非包被增強基底材料 阻燃（垂直燃燒試驗）型銅包被的環 | Materials for printed boards and other interconnection structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad |
| IEC 61249-2-2-2005 | 印制板和其它互連結構用材料.第2-2部分:包被和非包被增強基材.酚醛纖維素紙?jiān)鰪?qiáng)銅包被電工疊層板 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| IEC 61249-2-21-2003 | 印制板和其他互聯結構用材料.第2-21部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧編 | Materials for printed boards and other interconnection structures - Part 2-21: Reinforced base materials, clad and unclad; Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-22-2005 | 印制板和其他互連結構用材料.第2-22部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的改良的非鹵化 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-23-2005 | 印制板和其他互連結構用材料.第2-23部分:包被和非包被增強基材.銅包被的經濟級非鹵化酚醛纖維素紙?jiān)鰪?qiáng)層壓 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
| IEC 61249-2-26-2005 | 印制板和其他互連結構用材料.第2-26部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的非鹵化環氧非 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-4-2001 | 印制版和其他互連結構件用材料 第2-4部分：包被和非包被增強基材 阻燃（垂直燃燒試驗）型銅包被的聚酯非 | Materials for printed boards and other interconnection structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-5-2003 | 印制板和其他互聯結構用材料.第2-5部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素 | Materials for printed boards and other interconnection structures - Part 2-5: Reinforced base materials, clad and unclad; Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test) copper-clad |
| IEC 61249-2-8-2003 | 印制板和其它互連結構用材料.第2-8部分:包被和非包被增強基材.規定了易燃性的包銅改良溴化環氧編織玻璃纖維 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials clad and unclad; Modified brominated epoxide woven fiberglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-9-2003 | 印制板和其它互連結構用材料.第2-9部分:包被和非包被增強基材.規定了易燃性的包銅二順丁烯二酰亞胺/三嗪改 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad; Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-4-11-2005 | 印制板和其他互連結構用材料.第4-11部分:非包被預浸料的分規范集.阻燃型非鹵化環氧編織E型玻璃纖維預浸料坯 | Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide woven E-glass prepreg of defined flammability |
| IEC 61249-4-12-2005 | 印制板和其他互連結構用材料.第4-12部分:非包被預浸料的分規范集.阻燃型非鹵化多功能環氧編織E型玻璃纖維預 | Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability |
| IEC 61249-4-2-2005 | 印制板和其他互連結構用材料.第4-2部分:非包被預浸料的分規范集.阻燃型多功能環氧編織E型玻璃纖維預浸料坯 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
| IEC 61249-4-5-2005 | 印制板和其他互連結構用材料.第4-5部分:非包被預浸料的分規范集.阻燃型改良和未改良的聚酰亞胺編織E型玻璃 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
| IEC 61269-1-1-1994 | 纖維光學端接裝置 第1-1部分:空白詳細規范 | Fibre optic terminus sets - Part 1-1: Blank detail specification |
| IEC 61274-1-1-2006 | 纖維光學適配器.第1-1部分:空白詳細規范 | Adaptors for fibre optic connectors - Part 1-1: Blank detail specification |
| IEC 61274-1-2007 | 纖維光學轉接器.第1部分:總規范 | Adaptors for fibre optic connectors - Part 1: Generic specification |
| IEC 61280-1-1-1998 | 纖維光學通信子系統基本試驗程序 第1-1部分:一般通信子系統試驗程序 單模光纜發射器光輸出功率測量 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| IEC 61280-1-3-1998 | 纖維光學通信子系統基本試驗程序 第1-3部分:一般通信子系統試驗程序 中心波長和譜寬測量 | Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement |
| IEC 61280-1-4-2003 | 纖維光學通信子系統試驗程序.第1-4部分:一般通信子系統.多模纖維激光發射機用二維近場數據的采集和換算 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters |
| IEC 61280-2-1-1998 | 纖維光學通信子系統基本試驗程序 第2-1部分:數字系統試驗程序 接收器靈敏度和過載測量 | Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement |
| IEC 61280-2-10-2005 | 纖維光學通信子系統試驗程序.第2-10部分:數字系統.激光發射器的時間分辨線性調頻脈沖和α指數測量 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| IEC 61280-2-2-2005 | 纖維光學通信子系統試驗程序.第2-2部分:數字系統.光眼圖、波形和消光比的測量 | Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform, and extinction ratio measurement |
| IEC 61280-2-4-1998 | 纖維光學通信子系統基本試驗程序 第2-4部分:數字系統試驗程序 比特率容差測量 | Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems - Bit-rate tolerance measurement |
| IEC 61280-2-5-1998 | 纖維光學通信子系統基本試驗程序 第2-5部分:數字系統試驗程序 抖動轉移功能測量 | Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement |
| IEC 61280-4-1-2003 | 纖維光學通信子系統試驗程序.第4-1部分:光纜設備及鏈接.多模光纜設備的衰減測量 | Fibre-optic communication subsystem test procedures - Part 4-1: Cable plant and links; Multimode fibre-optic cable plant attenuation measurement |
| IEC 61280-4-2-1999 | 纖維光學通信子系統基本試驗程序 第4-2部分:光纜設施 單模光纜系統設施衰減 | Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant - Single-mode fibre optic cable plant attenuation |
| IEC 61280-4-4-2006 | 纖維光學通信子系統基本試驗程序.第4-4部分:已安裝鏈路的偏振模式色散測量 | Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links |
| IEC 61281-1-1999 | 纖維光學通信子系統 第1部分:總規范 | Fibre optic communication subsystems - Part 1: Generic specification |
| IEC 61290-3-2000 | 光學纖維放大器 基礎規范 第3部分:噪音數字參數的的測量方法 | Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters |
| IEC 61290-6-1-1998 | 光學纖維放大器 基礎規范 第6-1部分:泵浦泄漏參數的測量方法 光解復用器 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer |
| IEC 61300-1-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第1部分:總則和指南 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| IEC 61300-2-1 Corrigendum 1-2004 | 纖維光學互聯器件和無源元件.基本試驗和測量程序.第2-1部分:試驗.振動(正弦).勘誤1 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal); Corrigendum 1 |
| IEC 61300-2-1-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-1部分:試驗.振動(正弦) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) |
| IEC 61300-2-12-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-12部分:試驗.沖擊 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
| IEC 61300-2-14-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-14部分:試驗.光學功率控制和損壞閾特性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization |
| IEC 61300-2-15-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-15部分:試驗 鎖緊機構的扭轉強度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism |
| IEC 61300-2-18-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-18部分:試驗.干熱.高溫耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
| IEC 61300-2-19-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-19部分:試驗.濕熱(穩態) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) |
| IEC 61300-2-2-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-2部分:試驗.配接耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability |
| IEC 61300-2-21-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-21部分:試驗 溫度 濕度組合循環試驗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature-humidity cyclic test |
| IEC 61300-2-22-2007 | 纖維光學互聯器件和無源元件.基本試驗和測量程序.第2-22部分:試驗.溫度變化 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
| IEC 61300-2-23-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-23部分:試驗 非加壓式纖維光學器件外殼密封 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for not-pressurized closures of fibre optic devices |
| IEC 61300-2-24-1999 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-24部分:試驗 陶瓷準直套管篩選(施加應力) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application |
| IEC 61300-2-25-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-25部分:試驗 外殼密封耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests - Sealing endurance for closures |
| IEC 61300-2-27-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-27部分:試驗 灰塵 層流 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow |
| IEC 61300-2-28-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-28部分:試驗 工業大氣(二氧化硫) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide) |
| IEC 61300-2-29-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-29部分:試驗 低氣壓 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure |
| IEC 61300-2-30-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-30部分:試驗 太陽輻照 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-30: Tests - Solar radiation |
| IEC 61300-2-31-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-31部分:試驗 核輻照 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-31: Tests - Nuclear radiation |
| IEC 61300-2-32-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-32部分:試驗 水蒸氣滲透 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-32: Tests - Water vapour permeation |
| IEC 61300-2-33-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-33部分:試驗.外殼組裝和拆卸 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of closures |
| IEC 61300-2-34-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-34部分:試驗 耐溶劑和污染液體 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids |
| IEC 61300-2-37-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-37部分:試驗.光纖包閉用光纜彎形外殼 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures |
| IEC 61300-2-38-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-38部分:試驗.加壓纖維光學器件外殼密封 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures |
| IEC 61300-2-4-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-4部分:試驗 光纖/光纜保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention |
| IEC 61300-2-40-2000 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-40部分:試驗 單模調整式有角度光纖光纜連接器衰減的篩 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-40: Tests; Screen testing of attenuation of single-mode tuned angled optical connectors |
| IEC 61300-2-41-1998 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-41部分:試驗 單模調整式無角度光纖連接器衰減的篩選 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-41: Tests - Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors |
| IEC 61300-2-42-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-42部分:試驗.連接器靜態側向負荷 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors |
| IEC 61300-2-43-1999 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-43部分:試驗 單模PC光纖連接器回波損耗的篩選 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single mode PC optical fibre connectors |
| IEC 61300-2-44-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-44部分:試驗.纖維光學器件的應力消除的撓曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices |
| IEC 61300-2-45-1999 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-45部分:試驗 浸水耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests - Durability test by water immersion |
| IEC 61300-2-46-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-46部分:試驗.濕氣熱循環 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic |
| IEC 61300-2-47-2006 | 纖維光學互連器件和無源元件.基本試驗測量程序.第2-47部分:試驗.熱沖擊 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks |
| IEC 61300-2-48-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-48部分:試驗.溫度-濕度循環 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests; Temperature-humidity cycling |
| IEC 61300-2-49-2007 | 纖維光學互連器件和無源元件.基礎試驗和測量程序.第2-49部分:試驗.連接器安裝試驗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test |
| IEC 61300-2-5-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-5部分:試驗.扭轉 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion/Twist |
| IEC 61300-2-50-2007 | 纖維光學互連器件和無源元件.基礎試驗和測量程序.第2-50部分:試驗.帶靜載荷的纖維光學連接器檢驗試驗.單模 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode |
| IEC 61300-2-51-2007 | 纖維光學互連器件和無源元件.基礎試驗和測量程序.第2-51部分:試驗.帶外加拉伸負載的傳輸用纖維光學連接器試 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode |
| IEC 61300-2-6-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-6部分:試驗 鎖緊機構抗拉強度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism |
| IEC 61300-2-9-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第2-9部分:試驗 沖擊 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock |
| IEC 61300-3-1-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-1部分:檢查和測量.外觀檢查 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
| IEC 61300-3-10-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-10部分:檢驗和測量.量規保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force |
| IEC 61300-3-11-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-11部分:檢查和測量 連接和分離力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces |
| IEC 61300-3-12-1997 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-12部分:檢驗和測量 單模纖維光學器件衰減偏振函數:矩 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-12: Examinations and measurements - Polarization dependence of attenuation of a single-mode fibre optic component: Matrix calculation method |
| IEC 61300-3-13-1995 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-13部分:檢查和測量 纖維光學開關控制穩定性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch |
| IEC 61300-3-14-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-14部分:檢查和測量.可變光衰減器衰減度的準確性和重復 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator |
| IEC 61300-3-15-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-15部分:檢驗和測量.凸形拋光套管端面圓頂偏心度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface |
| IEC 61300-3-16-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-16部分:檢查和測量.套管球形拋光端面的曲率半徑 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules |
| IEC 61300-3-17-1999 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-17部分:檢查和測量 套管角度拋光端面的曲率角度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules |
| IEC 61300-3-18-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-18部分:檢驗和測量.角端面連接器的鍵控精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-18: Examinations and measurements - Keying accuracy of an angled endface connector |
| IEC 61300-3-19-1997 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-19部分:檢驗和測量 單模纖維光學器件回波損耗偏振依賴 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-19: Examinations and measurements - Polarization dependence of return loss of a single-mode fibre optic component |
| IEC 61300-3-2-1999 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-2部分:檢查和測量 單模纖維光學器件衰減偏振函數 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependence of attenuation in a single-mode fibre optic device |
| IEC 61300-3-20-2001 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-20部分：檢查和測量 纖維光學分支器件的定向性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices |
| IEC 61300-3-21-1998 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-21部分:檢查和測量 切換時間和回跳時間 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements; switching time and bounce time |
| IEC 61300-3-22-1997 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-22部分:檢查和測量 套管壓縮力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force |
| IEC 61300-3-23-1998 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-23部分:檢查和測量 光纖與套管端面間的相對位置 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements; fibre position relative to ferrule endface |
| IEC 61300-3-24-2006 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-24部分:檢查和測量.偏振保持光纖用連接器的鍵入準確度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre |
| IEC 61300-3-25-1997 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-25部分:檢查和測量 套管和裝有光纖套管的同心度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed |
| IEC 61300-3-27-1997 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-27部分:檢查和測量 多芯連接器插頭的孔位測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-27: Examinations and measurements - Measurement method for the hole location of a multiway connector plug |
| IEC 61300-3-29-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-29部分:檢查和測量.表征DWDM元件的光譜傳輸功能振幅的 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components |
| IEC 61300-3-3-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-3部分:檢查和測量.衰減和回波損耗中變化的自動監控 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| IEC 61300-3-30-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-30部分:檢查和測量.單套管多纖連接器上的光纖位置和拋 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors |
| IEC 61300-3-31-2003 | 光纖互連裝置和無源部件.基本試驗和測量程序.第3-34部分:檢驗和測量.纖維光學源的耦合功率比測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources |
| IEC 61300-3-33-1999 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-33部分:檢查和測量 套管分離力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Ferrule withdrawal force |
| IEC 61300-3-34-2001 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-34部分：檢查和測量 隨機插配連接器的衰減 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements; Attenuation of random mated connectors |
| IEC 61300-3-36-2000 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-36部分:檢查和測量 光纖連接器套管內徑和外徑測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules |
| IEC 61300-3-37-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-37部分:檢查和測量.光學纖維角度拋光端面的曲率角度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres |
| IEC 61300-3-39-1997 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-39部分:檢查和測量 PC光連接器基準插頭的選擇 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - PC optical connector reference plug selection |
| IEC 61300-3-4-2001 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-4部分：檢查和測量 衰減 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements; Attenuation |
| IEC 61300-3-40-1998 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-40部分:檢查和測量 帶偏振保持尾纖連接器消光比 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector |
| IEC 61300-3-5-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-5部分:檢查和測量.波長衰減函數 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation |
| IEC 61300-3-6-2005 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-3部分:檢查和測量.回波損耗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
| IEC 61300-3-7-2004 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第3-7部分:檢查和測量.波長衰減函數和回波損耗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss |
| IEC 61300-3-9-1997 | 纖維光學互連器件和無源元件 基本試驗和測量程序 第3-9部分:檢查和測量 遠端串音 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-9: Examinations and measurements - Far-end crosstalk |
| IEC 61314-1-1-2006 | 纖維光學扇形輸出器.第1-1部分:空白詳細規范 | Fibre optic fan-outs - Part 1-1: Blank detail specification |
| IEC 61314-1-2005 | 纖維光學扇形輸出器.第1部分:總規范 | Fibre optic fan-outs - Part 1: Generic specification |
| IEC 61315-2005 | 纖維光學功率計校準 | Calibration of fibre optic power meters |
| IEC 61744-2005 | 纖維光學色散試驗裝置的校準 | Calibration of fibre optic chromatic dispersion test sets |
| IEC 61745-1998 | 光學纖維幾何參數測量裝置校準端面影像分析程序 | End-face image analysis procedure for the calibration of optical fibre geometry test sets |
| IEC 61753-021-2-2002 | 纖維光學互連器件和無源元件性能標準.第021-2部分:C類單模光纖連接器終端.控制環境 | Fibre optic interconnecting devices and passive component performance standard - Part 021-2: Fibre optic connectors terminated on single-mode fibre for category C; Controlled environment |
| IEC 61753-021-6-2007 | 纖維光學互連裝置和無源元件性能標準.第021-6部分:O類B/2級單模纖維光學連接器.非控制環境 | Fibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single mode fibre optic connectors for category O - Uncontrolled environment |
| IEC 61753-051-3 Corrigendum 1-2004 | 勘誤1.纖維光學互連器件和無源元件性能標準.第051-3部分:U類單模纖維插入式固定衰減器.非受控環境 | Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for Category U - Uncontrolled environment |
| IEC 61753-051-3-2001 | 纖維光學互連器件和無源元件性能標準 第051-3部分：U類單模纖維插入式固定衰減器 非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U; Uncontrolled environment |
| IEC 61753-052-3-2001 | 纖維光學互連器件和無源元件性能標準.第052-3部分:U類單模光纖帶尾固定衰減器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 052-3: Single-mode fibre pigtailed-style fixed attenuators for category U; Uncontrolled environment |
| IEC 61753-053-3-2004 | 纖維光學互連器件和無源元件性能標準.第053-3部分:U類連續可變衰減器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment |
| IEC 61753-061-3-2004 | 纖維光學互連器件和無源元件性能標準.第061-3部分:U類單模纖維光學有抽頭的隔離器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment |
| IEC 61753-083-2-2007 | 纖維光學互連器件和無源元件性能標準.第083-2部分:C類用非連接器的單模光纖C波段/L波段WDM設備.受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment |
| IEC 61753-084-2-2007 | 纖維光學互連器件和無源元件性能標準.第084-2部分:C類用非連接器的單模980/1550nm WWDM設備.受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment |
| IEC 61753-091-3-2004 | 纖維光學互連器件和無源元件性能標準.第091-3部分:U類單模纖維光學有抽頭的循環器.非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single mode fibre optic pigtailed style circulators for category U - Uncontrolled environment |
| IEC 61753-1-2007 | 纖維光學互連器件和無源元件性能標準.第1部分:性能標準的總則和指南 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| IEC 61753-101-2-2006 | 纖維光學互連器件和無源元件性能標準.第101-2部分:受控環境的C類光纖管理系統 | Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for Category C - Controlled environment |
| IEC 61753-101-3-2006 | 纖維光學互連器件和無源元件性能標準.第101-3部分:不受控環境的U類光纖管理系統 | Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for category U - Uncontrolled environment |
| IEC 61753-2-1-2000 | 纖維光學互連器件和無源元件性能標準 第2-1部分:U類單模端接光纖連接器 非受控環境 | Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment |
| IEC 61753-2-3-2001 | 纖維光學互連器件和無源元件性能標準 第2-3部分：U類不做或連接器的單模1xN及2xN非波長可選分支器件 非受 | Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single-mode 1×N and 2×N non-wavelength-selective branching devices for category U; Uncontrolled environment |
| IEC 61754-1-1996 | 纖維光學連接器接口 第1部分:總則和指南 | Fibre optic connector interfaces - Part 1: General and guidance |
| IEC 61754-10-2005 | 纖維光學連接器接口.第10部分:微型MPO型連接器門類 | Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family |
| IEC 61754-12-1999 | 纖維光學連接器接口 第12部分:FS 型連接器門類 | Fibre optic connector interfaces - Part 12: Type FS connector family |
| IEC 61754-13-2006 | 纖維光學連接器接口.第13部分:FC-PC型連接器 | Fibre optic connector interfaces - Part 13: Type FC-PC connector |
| IEC 61754-15-1999 | 纖維光學連接器接口 第15部分:LSH型連接器門類 | Fibre optic connector interfaces - Part 15: Type LSH connector family |
| IEC 61754-16-1999 | 纖維光學連接器接口 第16部分:PN型連接器門類 | Fibre optic connector interfaces - Part 16: Type PN connector family |
| IEC 61754-18-2001 | 纖維光學連接器接口 第18部分：MT-RJ型連接器門類 | Fibre optic connector interfaces - Part 18: Type MT-RJ connector family |
| IEC 61754-19-2001 | 纖維光學連接器的接口 第19部分：SG型連接器門類 | Fibre optic connector interfaces - Part 19: Type SG connector family |
| IEC 61754-2-1996 | 纖維光學連接器接口 第2部分:BFOC/2.5 型連接器門類 | Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family |
| IEC 61754-20-2002 | 纖維光學連接器接口.第20部分:LC型連接器門類 | Fibre optic connector interfaces - Part 20: Type LC connector family |
| IEC 61754-21-2005 | 纖維光學連接器接口.第21部分:塑料光纖的SMI型連接器系列 | Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre |
| IEC 61754-22-2005 | 纖維光學連接器接口.第22部分:F-SMA型連接器門類 | Fibre optic connector interfaces - Part 22: Type F-SMA connector family |
| IEC 61754-23-2005 | 纖維光學連接器接口.第23部分:LX.5型連接器系列 | Fibre optic connector interfaces - Part 23: Type LX.5 connector family |
| IEC 61754-3-1996 | 纖維光學連接器接口 第3部分:LSA型連接器門類 | Fibre optic connector interfaces - Part 3: Type LSA connector family |
| IEC 61754-4 AMD 1-1999 | 纖維光學連接器接口 第4部分:SC型連接器門類 修改1 | Fibre optic connector interfaces - Part 4: Type SC connector family; Amendment 1 |
| IEC 61754-4 AMD 2-2001 | 纖維光學連接器接口 第4部分:SC型連接器門類 修改2 | Fibre optic connector interfaces - Part 4: Type SC connector family; Amendment 2 |
| IEC 61754-4-1-2003 | 纖維光學連接器接口.第4-1部分:SC型連接器系列.簡化SC-PC連接器接口 | Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptable SC-PC connector interfaces |
| IEC 61754-4-1997 | 纖維光學連接器接口 第4部分:SC型連接器門類 | Fibre optic connector interfaces - Part 4: Type SC connector family |
| IEC 61754-5-2005 | 纖維光學連接器接口.第5部分:MT型連接器門類 | Fibre optic connector interfaces - Part 5: Type MT connector family |
| IEC 61754-6 Corrigendum 1-1997 | 纖維光學連接器接口.第6部分:MU型連接器門類 | Fibre optic connector interfaces - Part 6: Type MU connector family |
| IEC 61754-6-2005 | 纖維光學連接器接口.第6部分:MU 型連接器門類 | Fibre optic connector interfaces - Part 6: Type MU connector family |
| IEC 61754-7-2004 | 纖維光學連接器接口.第7部分:MPO型連接器門類 | Fibre optic connector interfaces - Part 7: Type MPO connector family |
| IEC 61754-8-1996 | 纖維光學連接器接口 第8部分:CF08 型連接器門類 | Fibre optic connector interfaces - Part 8: CF08 connector family |
| IEC 61754-9-1996 | 纖維光學連接器接口 第9部分:DS 型連接器門類 | Fibre optic connector interfaces - Part 9: Type DS connector family |
| IEC 61755-1-2005 | 纖維光學連接器的接口.第1部分:單一模式非散射移位纖維的光學接口.總則和指南 | Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
| IEC 61755-2-1-2006 | 纖維光學連接器的接口.第2-1部分:標準非物理角接觸單模光纖的光學接口 | Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres |
| IEC 61755-2-2-2006 | 纖維光學連接器光學接口.第2-2部分:標準物理角連接單模光纖的光學接口 | Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres |
| IEC 61755-3-1-2006 | 纖維光學連接器的接口.第3-1部分:2.5mm和1.25mm直徑的圓柱形全氧化鋯環形單模光纖的光學接口 | Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical zirconia PC ferrule, single mode fibres |
| IEC 61755-3-2-2006 | 纖維光學連接器的接口.第3-1部分:2.5mm和1.25mm直徑的圓柱形全氧化鋯環形單模光纖的光學接口 | Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres |
| IEC 61755-3-5-2006 | 纖維光學連接器的光接口.第3-5部分:光接口.以銅鎳合金作為纖維環繞材料、單模纖維的直徑2.5mm和1.25mm圓柱 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61755-3-6-2006 | 纖維光學連接器光接口.第3-6部分:光接口.以銅鎳合金作為纖維環繞材料、單模纖維的直徑2.5mm和1.25mm圓柱形8 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61756-1-2006 | 光纖互連設備和無源元器件.纖維管理系統的接口標準.第1部分:總則和指南 | Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance |
| IEC 61757-1-1998 | 纖維光學傳感器 第1部分:總規范 | Fibre optic sensors - Part 1: Generic specification |
| IEC 61977-2001 | 纖維光學濾光器 總規范 | Fibre optic filters - Generic specification |
| IEC 61978-1-2000 | 纖維光學無源分散補償器.第1部分:總規范 | Fibre optic passive dispersion compensators - Part 1: Generic specification |
| IEC 62005-1-2001 | 纖維光學互連器件和無源元件的可靠性 第1部分：引導指南及定義 | Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductory guide and definitions |
| IEC 62005-2-2001 | 纖維光學互連器件和無源元件的可靠性 第2部分：基于加速老化試驗的可靠性定量評估 溫度和濕度：穩態 | Reliability of fibre optic interconnecting devices and passive components - Part 2: Quantitative assessment of reliability based on accelerated ageing tests; Temperature and humidity; Steady state |
| IEC 62005-3-2001 | 纖維光學互連器件和無源元件的可靠性 第3部分：評估無源元件失效模式和失效機理的相關試驗 | Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components |
| IEC 62005-4-1999 | 纖維光學互連器件和無源光學元件可靠性 第4部分:產品篩選 | Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening |
| IEC 62005-7-2004 | 纖維光學互連器件和無源光學元件的可靠性.第7部分:壽命應力模擬試驗 | Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling |
| IEC 62005-9-2-2007 | 纖維光學互連器件和無源光學元件可靠性.第9-2部分:單模纖維光學連接器裝置的可靠性鑒定.單模 | Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for single fibre optic connector sets - Single mode |
| IEC 62007-1-1999 | 纖維光學系統用半導體光電子器件 第1部分:基本額定值和特性 | Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essential ratings and characteristics |
| IEC 62007-2-1999 | 纖維光學系統用半導體光電器件 第2部分:測量方法 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
| IEC 62077-2001 | 纖維光學環行器 總規范 | Fibre optic circulators - Generic specification |
| IEC 62099-2001 | 纖維光學波長開關 總規范 | Fibre optic wavelength switches - Generic specification |
| IEC 62148-12-2004 | 纖維光學有源元件和器件.包裝和接口標準.第12部分:帶同軸RF連接器的激光傳輸器 | Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector |
| IEC 62148-2 Corrigendum 1-2003 | 纖維光學有源元件和器件.包裝和接口標準.第2部分:SFF MT-RJ 10針無線電收發信機 | Fibre optic active components and devices - Package interface standards - Part 2: SFF MT-RJ 10-pin transceivers |
| IEC 62148-6-2003 | 纖維光學有源元件和器件.包裝和接口標準.第6部分:ATM-PON無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers |
| IEC 62148-9 Corrigendum 1-2003 | 纖維光學有源元件和器件.包裝和接口標準.第9部分:SFF MU雙工10針無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers |
| IEC 62149-1 Corrigendum 1-2004 | 纖維光學有源元件和器件.性能標準.第1部分:總則和指南.勘誤1 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance; Corrigendum 1 |
| IEC 62149-1-2004 | 纖維光學有源元件和器件.性能標準.第1部分:總則和指南 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance |
| IEC 62149-3-2004 | 纖維光學有源元件和器件.性能標準.第3部分:2.5Gbit/s調制器-集成激光二極管發射機 | Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters |
| IEC 62149-4 Corrigendum 1-2003 | 纖維光學有源元件和器件.性能標準.第4部分:千兆比特以太網用1300nm纖維光學無線電收發信機 | Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application |
| IEC 62149-4-2003 | 纖維光學有源元件和器件.性能標準.第4部分:千兆比特以太網用1300nm纖維光學無線電收發兩用機 | Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application |
| IEC 62150-1-2005 | 纖維光學有源元件和器件.試驗和測量程序.第1部分:總則和指南 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance |
| IEC 62150-2-2004 | 纖維光學有源元件和器件.試驗和測量規程.第2部分: ATM-POM無線電收發信機 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers |
| IEC/PAS 61300-3-43-2006 | 纖維光學互連器件和無源元件.基本試驗和測量規程.第3-43部分:檢驗和測量.纖維光學源的模式轉換功能測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources |
| IEC/PAS 61753-081-2-2005 | 纖維光學互連器件和無源元件性能標準.第081-2部分:C類非連接式單模光纖中型1 Pt N DWDM設備.控制環境 | Fibre optic interconnecting devices and passive components performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 × N DWDM devices for category C - Controlled environments |
| IEC/PAS 61755-3-31-2007 | 纖維光學連接器光學接口.第3-31部分:光學接口.8度角PC端面PPS矩形金屬環單模纖維 | Fibre optic connector optical interfaces - Part 3-31: Optical interface - 8 degrees angled PC end-face PPS rectangular ferrule, single mode fibre |
| IEC/PAS 61755-3-32-2007 | 纖維光學連接器的光學接口.第3-32部分:光學接口.單模纖維、矩形8度角PC端面熱固性金屬套圈 | Fibre optic connector optical interfaces - Part 3-32: Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres |
| IEC/PAS 62074-1-2007 | 纖維光學WDM裝置.第1部分:一般規范 | Fibre optic WDM devices - Part 1: Generic specification |
| IEC/TR 61282-1-2000 | 纖維光學通信系統的設計指南 第1部分:單模數字系統和模擬系統 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
| IEC/TR 61282-2-2003 | 纖維光學通信系統設計指南.第2部分:多模和單模Gbit/s設備.吉位以太網模型 | Fibre optic communication system design guides - Part 2: Multimode and single-mode Gbit/s applications; Gigabit ethernet model |
| IEC/TR 61282-3-2006 | 纖維光學通信系統設計指南.第3部分:偏振模散射計算 | Fibre optic communication system design guides - Part 3: Calculation of polarisation mode dispersion |
| IEC/TR 61282-4-2003 | 纖維光學通信系統設計指南.第4部分:非線性效應的調節和利用 | Fibre optic communication system design guides - Part 4: Accomodation and utilization of non-linear effects |
| IEC/TR 61282-6-2003 | 纖維光學通信系統的設計指南.第6部分:并行光學互連系統的非對稱設計 | Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems |
| IEC/TR 61282-7-2003 | 纖維光學通信系統的設計指南.第7部分:顏色色散的統計計算 | Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion |
| IEC/TR 61282-8-2006 | 纖維光學通信系統設計指南.第8部分:根據測出的時間變化啁啾數據計算色散罰值 | Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data |
| IEC/TR 61282-9-2006 | 纖維光學通信系統設計指南.第9部分:偏振模散射計量和理論 | Fibre optic communication system design guides - Part 9: Guidance on polarisation mode dispersion measurements and theory |
| IEC/TR 61292-1-1998 | 纖維光學 放大器元件參數 | Fibre optics - Parameters of amplifier components |
| IEC/TR 62283-2003 | 核輻射.纖維光學指南 | Nuclear radiation - Fibre optic guidance |
| IEC/TR 62349-2005 | 光學纖維的偏振串音測試指南 | Guidance for polarization crosstalk measurement of optical fibre |
| IEC/TR3 61930-1998 | 纖維光學圖形符號 | Fibre optic graphical symbology |
| IEC/TR3 61931-1998 | 纖維光學 術語 | Fibre optic - Terminology |
| IEC/TS 62033-2000 | 光學纖維衰減均勻性 | Attenuation uniformity in optical fibres |
| ISO 10119-2002 | 碳纖維密度的測定 | Carbon fibre - Determination of density |
| ISO 10306-1993 | 紡織品 棉纖維 成熟度的氣流法評定 | Textiles; cotton fibres; evaluation of maturity by the air flow method |
| ISO 10312-1995 | 環境空氣 石棉纖維的測定 直接傳遞電子顯微鏡法 | Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method |
| ISO 10350-2-2001 | 塑料 可比單點數據的采集和表示 第2部分：長纖維增強塑料 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics |
| ISO 10352-1997 | 纖維增強塑料 模塑料和預浸料 單位面積質量的測定 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area |
| ISO 10397-1993 | 固定源排放 石棉廠排放物的測定 纖維計數測量法 | Stationary source emissions; determination of asbestos plant emissions; method by fibre count measurement |
| ISO 10466-1997 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材 耐初始環狀變形可能性試驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection |
| ISO 105-F07-2001 | 紡織品 色牢度試驗 第F07部分：再生醋酸纖維貼襯織物規范 | Textiles - Tests for colour fastness - Part F07: Specification for secondary acetate adjacent fabric |
| ISO 105-F10-1989 | 紡織品 色牢度試驗 第F10部分:貼襯織物規范:多纖維 | Textiles; tests for colour fastness; part F10: specification for adjacent fabric: multifibre |
| ISO 105-Z03-1996 | 紡織品 色牢度試驗 第Z03部分:聚丙烯腈纖維用堿性染料的互溶性 | Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres |
| ISO 10548-2002 | 碳纖維.尺寸的測定 | Carbon fibre - Determination of size content |
| ISO 1061-1990 | 塑料 未增塑的乙酸纖維素 游離酸度的測定 | Plastics; unplasticized cellulose acetate; determination of free acidity |
| ISO 10618-2004 | 碳纖維.樹脂浸漬紗拉伸性能的測定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn |
| ISO 10635-1999 | 耐火制品 陶瓷纖維制品的試驗方法 | Refractory products - Methods of test for ceramic fibre products |
| ISO 10928-1997 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材和管件 回歸分析及其使用方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use |
| ISO 10952-1999 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材和管件 在變形條件下斷面內部耐化學腐蝕性的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| ISO 11119-3-2002 | 混合結構氣瓶.規范和試驗方法.第3部分:無負載共用金屬或非金屬襯里的全纏繞纖維增強混合氣瓶 | Gas cylinders of composite construction - Specification and test methods - Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners |
| ISO 1130-1975 | 紡織纖維 試驗用的幾種取樣方法 | Textile fibres; Some methods of sampling for testing |
| ISO 1136-1976 | 羊毛 纖維平均直徑的測定 透氣性法 | Wool; Determination of mean diameter of fibres; Air permeability method |
| ISO 1140-2004 | 纖維繩索.聚酰胺繩索.3、4 和8股絞繩 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes |
| ISO 1141-2004 | 纖維繩索.聚酯繩索.3、4 和8股絞繩 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes |
| ISO 11566-1996 | 碳纖維 單長絲試樣拉伸性能的測定 | Carbon fibre - Determination of the tensile properties of single-filament specimens |
| ISO 11567-1995 | 碳纖維 長絲直徑和橫截面積的測定 | Carbon fibre - Determination of filament diameter and cross-sectional area |
| ISO 11667-1997 | 纖維增強塑料 模塑料和預浸料 樹脂、增強纖維和礦物質填料含量的測定 溶解法 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods |
| ISO 1172-1996 | 紡織玻璃纖維增強塑料、預浸料、模塑料和層壓塑料 紡織玻璃纖維和礦物質填料含量的測定 煅燒法 | Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods |
| ISO 11721-1-2001 | 紡織品 纖維素紡織品抗菌性的測定 土埋試驗 第1部分:防腐處理的評定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms; Soil burial test - Part 1: Assessment of rot-retardant finishing |
| ISO 11721-2-2003 | 紡織品.纖維素紡織品抗菌性的測定.土埋試驗.第2部分:防腐處理長期有效性的鑒定 | Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish |
| ISO 1181-2004 | 纖維繩索.馬尼拉麻和西沙爾麻繩索.3、4和8股繩 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes |
| ISO 11861-1999 | 鋪地織物 椰殼粗纖維墊 類型和規范 | Textile floor coverings - Coir mats - Types and specification |
| ISO 11923-1997 | 水質 玻璃纖維過濾器過濾法測定懸浮物 | Water quality - Determination of suspended solids by filtration through glass-fibre filters |
| ISO 12114-1997 | 纖維增強塑料 熱固性模壓塑料和預浸料 固化特性的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics |
| ISO 12115 Technical Corrigendum 1-1998 | 纖維增強塑料 熱固性模壓塑料和預浸料 流動性、熟化期和適用期的測定 技術勘誤1 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life; Technical Corrigendum 1 |
| ISO 12115-1997 | 纖維增強塑料 熱固性模壓塑料和預浸料 流動性、熟化期和適用期的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life |
| ISO 12215-1-2000 | 小艇 船體結構和尺寸 第1部分:材料:熱固性樹脂、玻璃纖維增強材料、基準層壓板 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| ISO 1268-1-2001 | 纖維增強塑料 試驗板制造方法 第1部分：一般條件 | Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions |
| ISO 1268-10-2005 | 纖維增強塑料.試驗板的生產方法.第10部分:BMC和其他長纖維模塑化合物的注模.多用途試樣的模制和一般原則 | Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens |
| ISO 1268-11-2005 | 纖維增強塑料.試驗板的生產方法.第11部分:BMC和其他長纖維模塑化合物的注模.小型試驗板 | Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
| ISO 1268-2-2001 | 纖維增強塑料 試驗板的制備方法 第2部分：接觸和噴涂壓塑法 | Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding |
| ISO 1268-3-2000 | 纖維增強塑料 試驗板的制備方法 第3部分:濕壓塑 | Fibre-reinforced plastics - Methods of producing test plates - Part 3: Wet compression moulding |
| ISO 1268-4-2005 | 纖維增強塑料.試驗板制造方法.第4部分:預浸料坯的模制 | Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs |
| ISO 1268-5-2001 | 纖維增強塑料 試驗板的制備方法 第5部分：繞絲法 | Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding |
| ISO 1268-6-2002 | 纖維增強塑料.試驗用板材的生產方法.第6部分:Pultrusion 鑄造品 | Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding |
| ISO 1268-7-2001 | 纖維增強塑料 試驗板的制備方法 第7部分：樹脂傳遞模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding |
| ISO 1268-8-2004 | 纖維增強塑料.試驗板的制備方法.第8部分:SMC和BMC的壓縮模制 | Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC |
| ISO 1268-9-2003 | 纖維增強塑料.試驗板的制備方法.第9部分:GMT/STC模制 | Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC |
| ISO 13002-1998 | 碳纖維 長絲紗命名體系 | Carbon fibre - Designation system for filament yarns |
| ISO 13003-2003 | 纖維增強塑料.周期性荷載條件下疲勞特性的測定 | Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions |
| ISO 1346-2004 | 纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3)繩索.3、4和8股繩索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes |
| ISO 13586 AMD 1-2003 | 塑料.斷裂韌性的測定G<上標IC>)和K<上標IC>.線彈性斷裂力學法.修改件1:含不連續增強纖維的注塑成形塑料的試 | Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>); Linear elastic fracture mechanics (LEFM) approach - Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinous reinforcing fibres |
| ISO 137-1975 | 羊毛 纖維直徑的測定 投影顯微鏡法 | Wool; Determination of fibre diameter; Projection microscope method |
| ISO 13794-1999 | 環境空氣 石棉纖維的測定 間接傳遞電子顯微鏡法 | Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method |
| ISO 14125 Technical Corrigendum 1-2001 | 纖維增強塑料復合材料 彎曲性能的測定 技術勘誤1 | Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1 |
| ISO 14125-1998 | 纖維增強塑料復合材料 彎曲性能的測定 | Fibre-reinforced plastic composites - Determination of flexural properties |
| ISO 14126 Technical Corrigendum 1-2001 | 纖維增強塑料復合材料 平面方向壓縮性的測定 技術勘誤1 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction; Technical corrigendum 1 |
| ISO 14126-1999 | 纖維增強塑料復合材料 平面方向壓縮性的測定 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
| ISO 14129-1997 | 纖維增強塑料復合材料 用±45°張力試驗法測定平面剪應力/剪應變特性,包括平面切變模量和剪切強度 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ?45° tension test method |
| ISO 14130 Technical Corrigendum 1-2003 | 纖維增強塑料復合材料.用短試片法測定表觀層間粘合剪切強度.技術勘誤1 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method; Technical Corrigendum 1 |
| ISO 14130-1997 | 纖維增強塑料復合材料 用短試片法測定表觀層間粘合剪切強度 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method |
| ISO 14446-1999 | 色漆和清漆用粘合劑 工業乙酸纖維素溶液粘度測定及此類溶液的分類 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
| ISO 14692-1-2002 | 石油和天然氣工業.玻璃纖維增強塑料管.第1部分:詞匯、符號、應用和材料 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials |
| ISO 14692-2-2002 | 石油和天然氣工業.玻璃纖維增強塑料管.第2部分:合格鑒定和制造 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture |
| ISO 14692-3-2002 | 石油和天然氣工業.玻璃纖維增強塑料管.第3部分:系統管道 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System piping |
| ISO 14692-4 Technical Corrigendum 1-2006 | 石油和天然氣工業.玻璃纖維增強塑料管.第4部分:制作、安裝和操作;技術勘誤1 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation; Technical Corrigendum 1 |
| ISO 14692-4-2002 | 石油和天然氣工業.玻璃纖維增強塑料管.第4部分:制作、安裝和操作 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation |
| ISO 14828-2003 | 玻璃纖維增強熱固性塑料管.潮濕條件下長期特定環形松馳硬度的測定和濕松弛因數的計算 | Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor |
| ISO 14966 Technical Corrigendum 1-2007 | 環境空氣.無機纖維顆粒數值濃度的測定.掃描電子顯微鏡法.技術勘誤1 | Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1 |
| ISO 14966-2002 | 環境空氣.無機纖維顆粒的數值濃度的測定.掃描電子顯微鏡檢查法 | Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
| ISO 15024-2001 | 纖維增強塑料復合材料 間接增強材料的模型I層間摩擦粗糙度的測定 | Fibre-reinforced plastic composites - Determination of Mode I interlaminar fracture toughness, G<(Index)IC>, for unidirectionally reinforced materials |
| ISO 15100-2000 | 塑料 增強纖維 短切原絲 體積密度的測定 | Plastics - Reinforcement fibres - Chopped strands; Determination of bulk density |
| ISO 15310-1999 | 纖維增強塑料復合材料 用板捻法測定內剪模量 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method |
| ISO 15598-1999 | 茶葉 粗纖維含量的測定 | Tea - Determination of crude fibre content |
| ISO 15630-2-2002 | 混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric |
| ISO 15733-2001 | 精細陶瓷（高級陶瓷，先進技術陶瓷） 連續纖維增強復合材料的室溫拉申應力特性的試驗方法 | Fine ceramics (advanced ceramis, advanced technical ceramics) - Test method for tensile stress-strain behaviour of continuous, fibre-reinforced composites at room temperature |
| ISO 15840-2004 | 船舶和海上技術.用于海上設備的熱固性樹脂纖維管道和裝置的標準規范 | Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| ISO 1598-1990 | 塑料 乙酸纖維素 不溶物的測定 | Plastics; cellulose acetate; determination of insoluble particles |
| ISO 1599-1990 | 塑料 乙酸纖維素 模塑時粘度降低的測定 | Plastics; cellulose acetate; determination of viscosity loss on moulding |
| ISO 1600-1990 | 塑料 乙酸纖維素 利用熱的不同循環在生產模制樣品中光吸收量的測定 | Plastics; cellulose acetate; determination of light absorption on moulded specimens produced using different periods of heating |
| ISO 16000-7-2007 | 室內空氣.第7部分:空氣中石棉纖維濃度測定用取樣策略 | Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations |
| ISO 16057-2002 | 涂覆磨料.硫化纖維砂輪 | Coated abrasives - Vulcanized fibre discs |
| ISO 16065-1-2001 | 紙漿 用自動光學分析法測定纖維長度 第1部分：偏振光法 | Pulps - Determination of fibre length by automated optical analysis - Part 1: Polarized light method |
| ISO 16065-2-2007 | 紙漿.用自動光學分析法對纖維長度的測定.第2部分:非偏振光法 | Pulps - Determination of fibre length by automated optical analysis - Part 2: Unpolarized light method |
| ISO 16472-2006 | 動物飼料.精制淀粉酶中性清潔劑纖維(aNDF)含量的測定 | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) |
| ISO 16549-2004 | 紡織物.纖維繩的不均勻性.容量法 | Textiles - Unevenness of textile strands - Capacitance method |
| ISO 17064-2004 | 木基板材.纖維板、碎料板和定向絞合板(OSB).詞匯 | Wood-based panels - Fibreboard, particleboard and oriented strand board (OSB) - Vocabulary |
| ISO 17504-1999 | 鋪地織物 用磨損儀測定羊毛纖維的完整性 | Textile floor coverings - Determination of wool fibre integrity using an abrasion machine |
| ISO 17771-2003 | 塑料.熱固性模塑料.片狀成型料(SMC)中玻璃纖維浸潤度的測定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC |
| ISO 1833 AMD 1-1980 | 紡織品 雙組分纖維混合物 定量化學分析 修改1 | Textiles; binary fibre mixtures; quantitative chemical analysis; amendment 1 |
| ISO 1833-10-2006 | 紡織品.定量化學分析.第10部分:三醋酸酯或聚交酯和某些其它纖維的混合(二氯甲法) | Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) |
| ISO 1833-11-2006 | 紡織品.定量化學分析.第11部分:纖維素和聚酯纖維的混合（硫酸法） | Textiles - Quantitative chemical analysis - Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) |
| ISO 1833-12-2006 | 紡織品.定量化學分析.第12部分:丙烯酸、某些改良丙烯酸、某些聚氯乙烯系纖維、某些彈性烷及某些其它纖維的 | Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) |
| ISO 1833-13-2006 | 紡織品.定量化學分析.第13部分:某聚氯乙烯系纖維和某些其它纖維的混合（二硫化碳/丙酮法） | Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) |
| ISO 1833-14-2006 | 紡織品.定量化學分析.第14部分:乙酸酯和某些聚氯乙烯系纖維的混合（乙酸法） | Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) |
| ISO 1833-15-2006 | 紡織品.定量化學分析.第15部分:黃麻和某些動物纖維的混合（氮含量測定法） | Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) |
| ISO 1833-16-2006 | 紡織品.定量化學分析.第16部分:聚丙烯和某些其它纖維的混合（二甲苯法） | Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) |
| ISO 1833-17-2006 | 紡織品.定量化學分析.第17部分:含氯纖維（氯乙烯的均聚物) 和某些其它纖維的混合（硫磺酸法） | Textiles - Quantitative chemical analysis - Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) |
| ISO 1833-19-2006 | 紡織品.定量化學分析.第19部分:纖維素纖維和石棉的混合（加熱法） | Textiles - Quantitative chemical analysis - Part 19: Mixtures of cellulose fibres and asbestos (method by heating) |
| ISO 1833-1977 | 紡織品 雙組分纖維混合物 定量化學分析 | Textiles; Binary fibre mixtures; Quantitative chemical analysis |
| ISO 1833-2-2006 | 紡織品.定量化學分析.第2部分:三組分纖維混合物 | Textiles - Quantitative chemical analysis - Part 2: Ternary fibre mixtures |
| ISO 1833-21-2006 | 紡織品.定量化學分析.第21部分:聚氯乙烯系纖維、某些改良丙烯酸、某些彈性烷、乙酸酯、三醋酸酯和某些其它 | Textiles - Quantitative chemical analysis - Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) |
| ISO 1833-3-2006 | 紡織品.定量化學分析.第3部分:乙酸酯和某些其它纖維的混合(用丙酮法) | Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone) |
| ISO 1833-4-2006 | 紡織品.定量化學分析.第4部分:固定纖維蛋白質和其他固定纖維混紡織品（使用次氯酸鹽法） | Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) |
| ISO 1833-5-2006 | 紡織品.定量化學分析.第5部分:粘膠纖維、銅氨纖維或莫代爾纖維和棉纖維的混合（鋅酸鈉法） | Textiles - Quantitative chemical analysis - Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) |
| ISO 1833-6-2007 | 紡織材料.定量化學分析.第6部分:粘膠纖維或特定類型銅氨纖維或高溫模量粘膠纖維或溶解性纖維素纖維和棉纖維 | Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) |
| ISO 1833-7-2006 | 紡織品.定量化學分析.第7部分:聚酰胺和某些其它纖維的混合（甲酸法） | Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) |
| ISO 1833-8-2006 | 紡織品.定量化學分析.第8部分:乙酸酯和三醋酸纖維的混合（丙酮法） | Textiles - Quantitative chemical analysis - Part 8: Mixtures of acetate and triacetate fibres (method using acetone) |
| ISO 1833-9-2006 | 紡織品.定量化學分析.第9部分:乙酸酯和三醋酸混紡纖維(芐醇法） | Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) |
| ISO 1856-2000 | 可塑纖維素聚合材料 拉伸強度和斷裂伸長的測定 | Flexible cellular polymeric materials - Determination of compression set |
| ISO 18692-2007 | 海上看守崗用纖維繩.聚酯 | Fibre ropes for offshore stationkeeping - Polyester |
| ISO 1875-1982 | 塑料 增塑的乙酸纖維素 乙醚萃取物測定 | Plastics; Plasticized cellulose acetate; Determination of matter extractable by diethyl ether |
| ISO 1887-1995 | 紡織玻璃纖維 易燃物質含量的測定 | Textile glass - Determination of combustible-matter content |
| ISO 1888-2006 | 紡織玻璃纖維.短纖維或長絲.平均直徑的測定 | Textile glass - Staple fibres or filaments - Determination of average diameter |
| ISO 1968-2005 | 纖維繩索和繩索制品.詞匯 | Fibre ropes and cordage - Vocabulary |
| ISO 1969-2004 | 纖維繩索.聚乙烯.3和4股繩索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes |
| ISO 1973-1995 | 紡織纖維 線密度的測定 稱重和振動法 | Textiles fibres - Determination of linear density - Gravimetric method and vibroscope method |
| ISO 20504-2006 | 精細陶瓷(高級陶瓷、高級工業陶瓷).在室溫下連續纖維增強復合材料的壓縮特性試驗方法 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature |
| ISO 20505-2005 | 精密陶瓷(高級陶瓷、高級工業陶瓷).用雙凹口試件擠壓和Iosipescu試驗在環境溫度下連續纖維增強復合材料層間 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test |
| ISO 20506-2005 | 細陶瓷(高級陶瓷、高級工業陶瓷).在室溫下用Iosipescu試驗測定連續纖維增強復合材料的面內剪切強度 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test |
| ISO 2076-1999 | 紡織品 人造纖維 屬名 | Textiles - Man-made fibres - Generic names |
| ISO 2078-1993 | 紡織玻璃纖維 紗線 名稱 | Textile glass; yarns; designation |
| ISO 2113 Technical Corrigendum 1-2003 | 增強纖維.機織物.基本規范.技術勘誤1 | Reinforcement fibres - Woven fabrics - Basis for a specification; Technical Corrigendum 1 |
| ISO 2113-1996 | 增強纖維 機織物 基本規范 | Reinforcement fibres - Woven fabrics - Basis for a specification |
| ISO 22198-2006 | 紡織物.纖維.測定寬度和長度 | Textiles - Fabrics - Determination of width and length |
| ISO 22306-2007 | 重力系統纖維增強水泥管、接縫和管件 | Fibre-reinforced cement pipe, joints and fittings for gravity systems |
| ISO 22314-2006 | 塑料.玻璃纖維增強產品.纖維長度測定 | Plastics - Glass-fibre-reinforced products - Determination of fibre length |
| ISO 2307-2005 | 纖維繩索.特定物理和機械性能的測定 | Fibre ropes - Determination of certain physical and mechanical properties |
| ISO 2370-1980 | 紡織品 亞麻纖維細度的測定 透氣法 | Textiles; Determination of fineness of flax fibres; Permeametric methods |
| ISO 23713-2005 | 紙漿.用自動光學分析測定纖維粗度.偏振光法 | Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method |
| ISO 2403-1972 | 紡織品 棉纖維 馬克隆值的測定 | Textiles; Cotton fibres; Determination of micronaire value |
| ISO 2558-1974 | 增強塑料用玻璃纖維短切原絲氈 粘合劑在苯乙烯中溶解時間的測定 | Textile glass chopped-strand mats for reinforcement of plastics; Determination of time of dissolution of the binder in styrene |
| ISO 2559-2000 | 紡織玻璃纖維 墊(由短線或連續膠捻線制成) 名稱和基本規范 | Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications |
| ISO 2646-1974 | 羊毛 使用纖維長度分析儀測定在精梳系統上加工的纖維長度 | Wool; Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine |
| ISO 2647-1973 | 羊毛 用投影顯微鏡測定有髓纖維的百分率 | Wool; Determination of percentage of medullated fibres by the projection microscope |
| ISO 2648-1974 | 羊毛 纖維長度分布參數的測定 電子法 | Wool; Determination of fibre length distribution parameters; Electronic method |
| ISO 2695-1976 | 建筑用纖維板 一般用途硬質和中質板:質量規范 外觀、形狀和尺寸公差 | Fibre building boards; Hard and medium boards for general purposes; Quality specifications; Appearance, shape and dimensional tolerances |
| ISO 2696-1976 | 建筑用纖維板 一般用途硬質和中質板:質量規范 吸水性和厚度膨脹 | Fibre building boards; Hard and medium boards for general purposes; Quality specifications; Water absorption and swelling in thickness |
| ISO 2797-1986 | 紡織玻璃纖維 粗紗 基本規范 | Textile glass; Rovings; Basis for a specification |
| ISO 3037-2007 | 瓦楞紙纖維板. 邊緣抗壓強度的測定(邊緣未浸臘法) | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) |
| ISO 3060-1974 | 紡織品 棉纖維 束纖維斷裂強度的測定 | Textiles; Cotton fibres; Determination of breaking tenacity of flat bundles |
| ISO 3340-1976 | 建筑用纖維板 含砂量的測定 | Fibre building boards; Determination of sand content |
| ISO 3341-2000 | 紡織玻璃纖維 紗線 斷裂強力和斷裂伸長的測定 | Textile glass - Yarns - Determination of breaking force and breaking elongation |
| ISO 3342-1995 | 紡織玻璃纖維 氈 拉伸斷裂強力的測定 | Textile glass - Mats - Determination of tensile breaking force |
| ISO 3343-1984 | 紡織玻璃纖維 紗線 捻度平衡指數的測定 | Textile glass; Yarns; Determination of twist balance index |
| ISO 3375-1975 | 紡織玻璃纖維 粗紗硬挺度的測定 | Textile glass; Determination of stiffness of rovings |
| ISO 3451-3-1984 | 塑料 灰分的測定 第3部分:未增塑的乙酸纖維素 | Plastics; Determination of ash; Part 3 : Unplasticized cellulose acetate |
| ISO 3505-1975 | 繩索和繩索制品 系船用的天然纖維繩索和化學纖維繩索的等效性 | Ropes and cordage; Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels |
| ISO 3546-1976 | 建筑用纖維板 表面光潔度(粗糙度)的測定 | Fibre building boards; Determination of surface finish (roughness) |
| ISO 3597-1-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.第1部分:棒材的一般考慮和制備 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods |
| ISO 3597-2-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.第2部分:彎曲強度的測度 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength |
| ISO 3597-3-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.第3部分:壓縮強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength |
| ISO 3597-4-2003 | 紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.第4部分:表觀層間剪切強度的測定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength |
| ISO 3598-1986 | 紡織玻璃纖維 紗線 基本規范 | Textile glass; Yarns; Basis for a specification |
| ISO 36-2005 | 硫化或熱塑性橡膠.紡織纖維粘著強度的測定 | Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics |
| ISO 3616-2001 | 紡織玻璃纖維 氈 平均厚度、加載厚度和加載后復原厚度的測定 | Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression |
| ISO 3729-1976 | 建筑用纖維板 表面穩定性的測定 | Fibre building boards; Determination of surface stability |
| ISO 390-1993 | 纖維增強水泥制品 抽樣和檢驗 | Products in fibre-reinforced cement; sampling and inspection |
| ISO 3914-5-1994 | 紡織機械與附件 圓柱形筒管 第5部分:合成纖維長絲筒管的尺寸、公差和標記 | Textile machinery and accessories - Cylindrical tubes - Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns |
| ISO 4345-1988 | 鋼絲繩 纖維主芯 規范 | Steel wire ropes; fibre main cores; specification |
| ISO 4603-1993 | 紡織玻璃纖維 機織物 厚度的測定 | Textile glass; woven fabrics; determination of thickness |
| ISO 4604-1978 | 紡織玻璃纖維 機織物 普通彎曲硬挺度的測定 固定角彎曲計法 | Textile glass; Woven fabrics; Determination of conventional flexural stiffness; Fixed angle flexometer method |
| ISO 4606-1995 | 紡織玻璃纖維 機織物 用條樣法測定拉伸斷裂強力和斷裂伸長 | Textile glass - Woven fabric - Determination of tensile breaking force and elongation at break by the strip method |
| ISO 4899-1993 | 紡織玻璃纖維 增強熱固性塑料 性能和試驗方法 | Textile-glass reinforced thermosetting plastics; properties and test methods |
| ISO 4900-1990 | 紡織玻璃纖維 氈和織物 手工覆模性的測定 | Textile glass; mats and fabrics; determination of contact mouldability |
| ISO 4911-1980 | 紡織品 棉纖維 原棉分級室用設備和人造光源 | Textiles; Cotton fibres; Equipment and artificial lighting for cotton classing rooms |
| ISO 4912-1981 | 紡織品 棉纖維 成熟度的測量 顯微鏡法 | Textiles; Cotton fibres; Evaluation of maturity; Microscopic method |
| ISO 4913-1981 | 紡織品 棉纖維 長度(跨距長度)和整齊度指數的測定 | Textiles; Cotton fibres; Determination of length (span length) and uniformity index |
| ISO 5079-1995 | 紡織纖維 單纖維斷裂強力和伸長率的測定 | Textile fibres - Determination of breaking force and elongation at break of individual fibres |
| ISO 527-4-1997 | 塑料 拉伸性能的測定 第4部分:各向同性及各向異性纖維增強塑料復合材料試驗條件 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| ISO 527-5-1997 | 塑料 拉伸性能的測定 第5部分:單向纖維增強塑料復合材料試驗條件 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
| ISO 5350-3-1997 | 紙漿 塵埃和纖維束的估算 第3部分:通過反射光檢驗 | Pulps - Estimation of dirt and shives - Part 3: Inspection by reflected light |
| ISO 5498-1981 | 農產食品 粗纖維含量的測定 一般方法 | Agricultural food products; Determination of crude fibre content; General method |
| ISO 585-1990 | 塑料 未增塑的乙酸纖維素 水分含量的測定 | Plastics; unplasticized cellulose acetate; determination of moisture content |
| ISO 6541-1981 | 農產食品 粗纖維含量的測定 改進的沙勒法 | Agricultural food products; Determination of crude fibre content; Modified Scharrer method |
| ISO 6741-1-1989 | 紡織品 纖維和紗線 交付貨物商業質量的測定 第1部分:質量的測定和計算 | Textiles; fibres and yarns; determination of commercial mass of consignments; part 1: mass determination and calculations |
| ISO 6741-2-1987 | 紡織品 纖維和紗線 交付貨物商業質量的測定 第2部分:實驗室取樣法 | Textiles; Fibres and yarns; Determination of commercial mass of consignments; Part 2 : Methods for obtaining laboratory samples |
| ISO 6741-3-1987 | 紡織品 纖維和紗線 交付貨物商業質量的測定 第3部分:樣品凈化規程 | Textiles; Fibres and yarns; Determination of commercial mass of consignments; Part 3 : Specimen cleaning procedures |
| ISO 6865-2000 | 動物飼料 粗纖維含量的測定 中級過濾法 | Animal feeding stuffs - Determination of crude fibre content - Method with intermediate fibration |
| ISO 6888-2 AMD 1-2003 | 食品和動物飼料的微生物學.凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法.第2部分:兔血漿纖維 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium; Amendment 1: Inclusion of precision date |
| ISO 6888-2-1999 | 食品和動物飼料的微生物學 凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法 第2部分: 兔血漿纖 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium |
| ISO 6938-1984 | 紡織品 天然纖維 屬名和定義 | Textiles; Natural fibres; Generic names and definitions |
| ISO 6989-1981 | 紡織纖維 短纖維長度和長度分布的測定(單纖維測定) | Textile fibres; Determination of length and length distribution of staple fibres (by measurement of single fibres) |
| ISO 7370-1983 | 玻璃纖維增強熱固性塑料(GRP)管材和管件 公稱直徑、規定直徑和標準長度 | Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths |
| ISO 7432-2002 | 玻璃纖維增強熱固性塑料管道和管配件.檢驗設計帶彈性體密封件的鎖緊套筒連接件,包括雙插孔連接件的試驗方法 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals |
| ISO 75-3-2004 | 塑料.載荷下?lián)锨鷾囟鹊臏y(cè)定.第3部分:高強度熱固性疊層板和長纖維增強塑料 | Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
| ISO 7509-2000 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材 持續內壓力下破壞時間的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure |
| ISO 7510-1997 | 塑料管道系統 玻璃纖維增強塑料(GRP)元件 重量法測定成分 | Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method |
| ISO 7511-1999 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材和管件 確定短期內壓下管壁密封性的檢驗方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure |
| ISO 7684-1997 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材 干燥條件下蠕變系數的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
| ISO 7685-1998 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材 初始有效環剛度的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| ISO 769-1972 | 建筑用纖維板 硬質和中質板:浸水后吸水性和厚度膨脹的測定 | Fibre building boards; Hard and medium boards; Determination of water absorption and of swelling in thickness after immersion in water |
| ISO 7822-1990 | 玻璃纖維增強塑料 孔隙率的測定 燒失量、機械粉碎和靜態計數法 | Textile glass reinforced plastics; determination of void content; loss on ignition, mechanical disintegration and statistical counting methods |
| ISO 7884-3-1987 | 玻璃 粘度和粘度固定點 第3部分:用纖維伸長粘度計測定粘度 | Glass; Viscosity and viscometric fixed points; Part 3 : Determination of viscosity by fibre elongation viscometer |
| ISO 8115-2-1994 | 包 第2部分:人造短纖維包 尺寸 | Bales - Part 2: Bales of man-made staple fibres - Dimensions |
| ISO 8159-1987 | 紡織品 纖維和紗線的形態 詞匯 兩種語言版 | Textiles; Morphology of fibres and yarns; Vocabulary Bilingual edition |
| ISO 8335-1987 | 水泥膠結顆粒板 木質纖維粒增強波特蘭水泥或相類似的水泥板 | Cement-bonded particleboards; Boards of Portland or equivalent cement reinforced with fibrous wood particles |
| ISO 8336 AMD 1-2004 | 纖維水泥平板.修改件1 | Fibre-cement flat sheets; Amendment 1 |
| ISO 8336 Technical Corrigendum 1-2005 | 纖維水泥平板.技術勘誤1 | Fibre-cement flat sheets; Technical Corrigendum 1 |
| ISO 8336-1993 | 纖維水泥平板 | Fibre-cement flat sheets |
| ISO 8513-2000 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材 縱向抗拉特性的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longitudinal tensile properties |
| ISO 8516-1987 | 紡織玻璃纖維 膨體紗 基本規范 | Textile glass; Textured yarns; Basis for a specification |
| ISO 8521-1998 | 塑料管道系統 玻璃纖維增強熱固性塑料(GRP)管材 表面內周拉伸強度的測定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
| ISO 8572-1991 | 玻璃纖維增強熱塑性塑料管材和管件 與壓力有關的定義,包括它們之間關系,以及安裝和連接的術語 | Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing |
| ISO 8605-2001 | 玻璃纖維增強塑料 片狀模塑料(SMC) 基本規范 | Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for a specification |
| ISO 8672-1993 | 空氣質量 用相差光學顯微鏡法測定空氣無機纖維濃度 濾膜法 | Air quality; determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy; membrane filter method |
| ISO 9073-10-2003 | 紡織品.非織造布的試驗方法.第10部分:干燥狀態下纖維戎和其它粒子生成物 | Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state |
| ISO 9125 AMD 1-2004 | 纖維水泥板和配件.修改件1 | Fibre-cement slates and fittings - Amendment 1 |
| ISO 9125 Technical Corrigendum 1-1993 | 纖維水泥板和配件 技術勘誤1 | Fibre-cement slates and fittings; technical corrigendum 1 |
| ISO 9125 Technical Corrigendum 2-2005 | 纖維水泥平板.技術勘誤2 | Fibre-cement slates and fittings; Technical Corrigendum 2 |
| ISO 9125-1990 | 纖維水泥板和配件 | Fibre-cement slates and fittings |
| ISO 9163-2005 | 玻璃纖維無捻粗紗 浸膠紗試樣的制作和拉伸強度的測定 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| ISO 9184-1-1990 | 紙漿、紙和紙板 纖維組成分析 第1部分:通用方法 | Paper, board and pulps; fibre furnish analysis; part 1: general method |
| ISO 9184-2-1990 | 紙漿、紙和紙板 纖維組成分析 第2部分:染色指南 | Paper, board and pulps; fibre furnish analysis; part 2: staining guide |
| ISO 9184-3-1990 | 紙漿、紙和紙板 纖維組成分析 第3部分:赫伯格染色試驗 | Paper, board and pulps; fibre furnish analysis; part 3: Herzberg staining test |
| ISO 9184-4-1990 | 紙漿、紙和紙板 纖維組成分析 第4部分:格拉夫“C”染色試驗 | Paper, board and pulps; fibre furnish analysis; part 4: Graff "C" staining test |
| ISO 9184-5-1990 | 紙漿、紙和紙板 纖維組成分析 第5部分:洛夫頓-梅里特染色試驗 | Paper, board and pulps; fibre furnish analysis; part 5: Lofton-Merritt staining test (modification of Wisbar) |
| ISO 9184-6-1994 | 紙漿、紙和紙板 纖維組成分析 第6部分:纖維粗度測定 | Paper, board and pulps - Fibre furnish analysis - Part 6: Determination of fibre coarseness |
| ISO 9184-7-1994 | 紙漿、紙和紙板 纖維組成分析 第7部分:權重因數測定 | Paper, board and pulps - Fibre furnish analysis - Part 7: Determination of weight factor |
| ISO 920-1976 | 羊毛 使用梳片分析器測定纖維長度(巴布長度和豪特長度) | Wool; Determination of fibre length (barbe and hauteur) using a comb sorter |
| ISO 9383 AMD 1-2004 | 纖維增強水泥制品.屋面用小波瓦或非對稱截面瓦和配件.修改件1 | Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing; Amendment 1 |
| ISO 9383 Technical Corrigendum 1-2005 | 纖維增強水泥制品.屋面用小波瓦或非對稱截面瓦和配件.技術勘誤1 | Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing; Technical Corrigendum 1 |
| ISO 9383-1995 | 纖維增強水泥制品 屋面用小波瓦或非對稱截面瓦和配件 | Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing |
| ISO 9384 AMD 1-2004 | 纖維水泥背瓦.修改件1 | Fibre-cement siding shingles; Amendment 1 |
| ISO 9384 Technical Corrigendum 1-2005 | 纖維水泥背瓦.技術勘誤1 | Fibre-cement siding shingles; Technical Corrigendum 1 |
| ISO 9384-1991 | 纖維水泥背瓦 | Fibre-cement siding shingles |
| ISO 9554-2005 | 纖維繩索.一般規范 | Fibre ropes - General specifications |
| ISO 9933 AMD 1-2004 | 纖維增強水泥制品.屋面和覆蓋用大波瓦或非對稱截面瓦和配件.修改件1 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Amendment 1 |
| ISO 9933 Technical Corrigendum 1-1999 | 纖維增強水泥制品 屋面和覆蓋用大波瓦或非對稱截面瓦和配件 技術勘誤1 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Technical corrigendum 1 |
| ISO 9933 Technical Corrigendum 2-2005 | 纖維增強水泥制品.屋面和覆蓋用大波瓦或非對稱截面瓦和配件.技術勘誤2 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Technical Corrigendum 2 |
| ISO 9933-1995 | 纖維增強水泥制品 屋面和覆蓋用大波瓦或非對稱截面瓦和配件 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding |
| ISO/ASTM 51650-2005 | 醋酸纖維素劑量測定系統使用規程 | Practice for use of a cellulose triacetate dosimetry system |
| ISO/IEC 14776-222-2005 | 信息技術.小型計算機系統接口(SCSI).第222部分:SCSI的纖維信道協議.第二版(FCP-2) | Information technology - Small Computer System Interface (SCSI) - Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2) |
| ISO/IEC TR 14165-117-2007 | 信息技術.纖維通道.第117部分:跳動和信號質量(MJSQ)方法論 | Information technology - Fibre Channel - Part 117: Methodologies for jitter and signal quality (MJSQ) |
| ISO/PAS 11856-2003 | 鋪地織物.纖維捆綁物測定的試驗方法 | Textile floor coverings - Test methods for the determination of fibre bind |
| ISO/TR 10465-2-2007 | 基于非飽和聚酯樹脂的柔性玻璃纖維增強管材的地下安裝.第2部分:靜態計算方法的比較 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 2: Comparison of static calculation methods |
| ISO/TR 10465-3-2007 | 基于非飽和聚酯樹脂的柔性玻璃纖維增強管材(GRP-UP)的地下安裝.第3部分:安裝參數和應用限值 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 3: Installation parameters and application limits |
| ISO/TR 1896-1991 | 纖維增強水泥制品 絕熱和防火用非燃性硅酸鈣或水泥纖維增強板 | Products in fibre-reinforced cement; non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection |
| ISO/TR 6741-4-1987 | 紡織品 纖維和紗線 交付貨物商業質量的測定 第4部分:用于商業允貼和商業回潮率的評估 | Textiles; Fibres and yarns; Determination of commercial mass of consignments; Part 4 : Values used for the commercial allowances and the commercial moisture regains |
| ISO/TR 7469-1981 | 硬質纖維板的尺寸穩定性 | Dimensional stability of hardboards |
| 編號 | 中文名稱 | 英文名稱 |