| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI B5.11-1964 | 多軸鉆頭用軸頭和可調接頭 | Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads |
| ANSI J-STD-002-1992 | 元件引線、接線端、焊片、接頭和金屬絲的軟釬焊性試驗 | Solderability tests for component leads, terminations, lugs, terminals and wires |
| ANSI PH3.101-1983 | 攝影(照相機).美國照相機用三角架接頭(1/4英寸-20牙) | Photography (Cameras) - Tripod Connections for American Cameras (1/4-Inch-20 Thread) |
| ANSI/API SPEC14L-2007 | 鎖緊心軸和落地螺紋接頭的規范 | Specification for Lock Mandrels and Landing Nipples |
| ANSI/ASAE S366.2-2004 | 農業拖拉機和機械.一般用途快速液壓接頭 | Agricultural tractors and machinery - General purpose quick-action hydraulic couplers |
| ANSI/ASME A112.18.3-2002 | 泵固定件接頭中防回流裝置和系統的性能要求 | Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings |
| ANSI/ASME B107.2-2002 | 電動沖擊式延伸、接合及萬向接頭套筒扳手(英制) | Socket Wrenches, Extensions, Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series) |
| ANSI/ASME MFC-3Ma-2007 | 用孔板、管接頭和文杜利管測量管道中的液體流量 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle and Venturi |
| ANSI/ASTM D2609-2002 | 聚乙烯塑料管塑料插入接頭規范 | Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe |
| ANSI/ASTM D2672a-1996 | 使用溶解粘固劑的IPS PVC管用接頭規范 | Specification for Joints for IPS PVC Pipe Using Solvent Cement |
| ANSI/ASTM D3138-2004 | 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液狀粘固劑規范 | Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ANSI/ASTM D3212-2007 | 使用軟質人造橡膠密封料制塑料排水管和污水管用接頭的規范 | Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
| ANSI/ASTM D5677-2005 | 用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM F1365-1991 | 采用柔性合成橡膠密封件的塑料地下管道接頭耐水滲透性試驗方法 | Test Method For Water Infiltration Resistance Of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals |
| ANSI/ASTM F1429-1999 | 用柔性合成橡膠密封件固定在套桶中的塑料地下管道接頭組合力試驗方法 | Test Method For Assembly Force Of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located In The Bell |
| ANSI/ASTM F1986-2001 | 冷熱飲用水系統用2型多層管壓合配件和壓合接頭的規范 | Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-water Systems |
| ANSI/ASTM F1987-2001 | 循環加熱系統用2型多層管、壓合配件和壓合接頭的規范 | Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems |
| ANSI/ASTM F2014-2000 | 管道非增強擠制T形接頭規范 | Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ANSI/ASTM F2634-2007 | 用拉力沖擊法的聚乙烯(PE)熔接接頭的實驗室測試用試驗方法 | Test Method for Laboratory Testing of Polyethylene(pe) Butt Fusion Joints Using Tensile-impact Method |
| ANSI/ASTM F682a-1982 | 鍛制碳素鋼套管接頭規范 | Specification for Wrought Carbon Steel Sleeve-type Pipe Couplings |
| ANSI/ASTM F704-1997 | 管道系統法蘭接頭用螺栓長度的選用慣例 | Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ANSI/ASTM F722-1982 | 船上管道系統用焊接接頭規范 | Specification for Welded Joints for Shipboard Piping Systems |
| ANSI/ASTM F905-2004 | 聚乙烯鞍形熔融接頭合格鑒定的實施規范 | Practice for Qualification of Polyethylene Saddle Fusion Joints |
| ANSI/AWS C3.2M/C 3.2-2008 | 評定硬釬焊接頭強度的標準方法 | Standard Methods for Evaluating the Strength of Brazed Joints |
| ANSI/AWS D14.4/D 14.4M-2005 | 機械和設備焊接接頭規范 | Specification for Welded Joints in Machinery and Equipment |
| ANSI/AWWA C111-2006 | 韌性鑄鐵壓力管和配件的橡膠墊接頭 | Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings |
| ANSI/CSA LC7-2009 | 管接頭密封化合物和材料 | Pipe Joint Sealing Compounds and Materials |
| ANSI/EIA 364-07B-1998 | 電連接件.壓合接頭變形試驗程序 | Electric Connectors - Crimp Contact Deformation Test Procedure |
| ANSI/EIA 5150000-1986 | 光學纖維和光纜接頭的一般規范 | Generic Specification for Optical Fiber and Cable Splices |
| ANSI/EIA 540ABAA-1991 | 引線間隙為0.635mm(0.25英寸)的塑料方形平接頭用片載插孔的詳細規范 | Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing) |
| ANSI/EIA 540ADAA-1992 | 電子設備用針狀格子排列插孔的適配器-載體方形平接頭的詳細規范 | Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for |
| ANSI/EIA 677-1997 | 小型電源接頭銷尺寸規范 | Specification for Small Form Factor Power Connector Pin Dimensions |
| ANSI/EIA-364-93-2009 | 電氣連接器用絕緣置換觸點(IDC)的重復線接頭和斷開試驗程序 | Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors |
| ANSI/IEEE 1511-2004 | 額定電壓為5kV至46 kV的系統上電力電纜、接頭和終端故障的調查和分析指南 | Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV |
| ANSI/IEEE 404-2006 | 額定電壓為2500-500000V的擠壓介質電纜接頭和層壓介質電纜接頭 | Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500 V - 500 000 V |
| ANSI/IEEE 592-2007 | 高壓電纜接頭和可拆分連接器用暴露半導體護套的標準 | Standard for Exposed Semiconducting Shields on High Voltage Cable Joints and Separable Connectors |
| ANSI/ISO 5675-1992 | 農業拖拉機和機械.一般用途快速液壓接頭 | Agricultural tractors and machinery - General purpose quick-action hydraulic couplers |
| ANSI/SAE J1036-1993 | 農用拖拉機圓柱形液壓系統管接頭的尺寸標準 | Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors |
| ANSI/SAE J512-1994 | 汽車管接頭 | Fittings, Automotive Tube |
| ANSI/SAE J513-1994 | 制冷用管接頭(ANSI/SAE J513F的修訂版) | Refrigeration Tube Fittings |
| ANSI/SAE J518-1993 | 四螺栓拼合法蘭型液壓法蘭管、管道及軟管接頭 | Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type |
| ANSI/SAE J530-1994 | 汽車管件接頭 | Automotive Pipe Fittings |
| ANSI/SCTE 116-2006 | 5/8-24端口、內螺紋接頭的規范 | Specification for 5/8-24 Port, Female Adapters |
| ANSI/SCTE 59-2003 | 電介質接頭上的中心對接 | Center Conductor Bond to Dielectric Bond |
| ANSI/TIA-455-8-2000 | 使用光時域反射計(OTDR)測量接頭損耗或連接器損耗和反射比 | Measurement of Splice or Connector Loss and Reflectance Using an OTDR |
| ANSI/TIA/EIA 102BAAA-1-1999 | 項目25， FDMA共用氣體管道接頭，補充件1 | Project 25 FDMA Common Air Interface Addendum 1 |
| ANSI/UL 181-2008 | 工廠制通風管和通風管接頭的安全標準 | Standard for Safety for Factory-Made Air Ducts and Air Connectors |
| ANSI/UL 181B-2008 | 與柔性風管和風管接頭一起使用的密閉系統的安全標準 | Standard for Safety for Closure Systems for Use With Flexible Air Ducts and Air Connectors |
| ASME B16.29-2001 | DWV類可鍛銅和可鍛銅合金釬焊連接排水管接頭 | (Wrought copper and wrought copper alloy solder joint drainage fittings - DWV) |
| ASME B16.39-1998 | 可鍛鐵螺紋管活接頭:等級150、250和300 | (Malleable iron threaded pipe unions; Classes 150, 250, and 300) |
| ASME MFC-3M Errata-1990 | 用孔板,管接頭和文丘里管測量管道中的流量.正誤表 | (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi; Errata) |
| ASME MFC-3M-1989 | 用孔板,管接頭和文丘里管測量管道中的液體流量. | (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi) |
| ASTM A865/A865M-2006 | 鋼管連接用黑色或鍍鋅(電鍍)焊接或無縫鋼螺紋接頭標準規范 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ASTM B687-1999(2005)e1 | 鍍黃銅、鍍銅和鍍鉻管接頭標準規范 | Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples |
| ASTM C443M-2007 | 用橡膠墊圈(米制)的混凝土管道和檢修孔用接頭的標準規范 | Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric) |
| ASTM C505-2005a | 帶橡膠墊圈接頭的無鋼筋混凝土灌溉水管標準規范 | Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints |
| ASTM C505M-2005a | 帶橡膠墊圈接頭的無鋼筋混凝土灌溉水管標準規范(米制) | Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric] |
| ASTM D1101-1997a(2006) | 室外用層壓結構木制品的膠合接頭完整性的標準試驗方法 | Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
| ASTM D2855-1996(2002) | 聚氯乙烯管和配件的溶劑粘固接頭制作的標準實施規程 | Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings |
| ASTM D2918-1999(2005) | 受撕裂應力的膠粘接頭耐用性的標準試驗方法 | Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
| ASTM D3138-2004 | 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液態粘結劑的標準規范 | Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ASTM D3164-2003 | 用拉伸負荷法測定膠粘劑粘接塑料搭接接頭剪切強度特性的標準試驗方法 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D3164M-2003 | 用拉伸負荷法測定膠粘劑粘接塑料搭接接頭剪切強度性能的試驗方法(米制) | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D3212-2007 | 使用彈性柔性密封料制塑料排水管和污水管用接頭的標準規范 | Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
| ASTM D3433-1999(2005) | 粘結接頭中膠粘劑的斷裂強度的標準試驗方法 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
| ASTM D3632-1998(2004) | 用氧壓法加速粘結接頭老化的試驗方法 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D4161-2001(2005) | 使用撓性彈性體密封件的"玻璃鋼"(玻璃纖維增強熱固樹脂)管接頭標準規范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
| ASTM D4502-1992(2004) | 木材粘結接頭耐熱和耐水性的標準試驗方法 | Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
| ASTM D5249-1995(2006) | 硅酸鹽水泥混凝土和地瀝青接頭加熱和制冷接縫密封膠襯墊材料的標準規范 | Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
| ASTM D5656-2004e1 | 拉伸載荷法測定剪切中膠粘劑應力-應變性能用厚被粘物金屬搭接-剪切接頭的標準試驗方法 | Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
| ASTM D6383-1999(2005) | 由EPDM屋頂膜材料制造的膠粘劑接頭的失效時間(蠕變破裂)的標準操作規程 | Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D7174-2005 | 混凝土面層和結構建造用預制閉孔聚烯烴伸縮接頭填充料的標準規范 | Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction |
| ASTM E677-1994(2004) | 可互換的圓球形接頭 | Standard Specification for Interchangeable Spherical Ground Joints |
| ASTM F1674-2005 | 與PVC管一起使用的接頭約束裝置的標準試驗方法 | Standard Test Method for Joint Restraint Products for Use with PVC Pipe |
| ASTM F1986-2001(2006) | 冷熱飲用水系統用2型多層管、壓合配件和壓合接頭的標準規范 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
| ASTM F2014-2000(2006) | 管道系統用非增強擠制T形接頭標準規范 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F2634-2007 | 通過拉力沖擊法實驗室測試聚乙烯(PE)熔接接頭的用標準試驗方法 | Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method |
| ASTM F905-2004 | 聚乙烯鞍形熔融接頭的合格證明的標準實施規程 | Standard Practice for Qualification of Polyethylene Saddle-Fused Joints |
| IEEE 404-2000 | 額定電壓2500V-500000V的擠壓和層壓介質鎧裝電纜接頭 | (Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V) |
| IEEE 592-1990 | 高壓電纜接頭和可分離絕緣連接器的外露半導體護套 | (Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors) |
| UL 1363-1996 | 重新配置的臨時電源接頭 | (Relocatable temporary power taps ) |
| UL 194-1996 | 防火用球墨鑄鐵和灰鑄鐵壓力管和配件加墊圈的接頭 | (Gasketed joints for ductile-iron pipe and fittings for fire protection service ) |
| UL 218A-2004 | 柴油機中驅動離心點火泵用電池接頭標準 | (Standard for battery contactors for use in diesel engines driving centrifugal fire pumps ) |
| UL 310-2003 | 電氣快速聯接接頭 | (Electrical quick-connect terminals) |
| UL 498A-1999 | 電流分接頭和適配器 | (Current taps and adapters ) |
| UL 860-2001 | 易燃和可燃流體與消防用管接頭 | (Pipe unions for flammable and combustible fluids and fire-protection service ) |
| 編號 | 中文名稱 | 英文名稱 |