| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 1119-1996 | 塑料管道系統 玻璃增強熱固塑料管和配件用接頭 撓性和還原接合接頭密封性和耐損傷性試驗方法 | Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints |
| EN 12293-1999 | 塑料管道系統 熱水和冷水用熱塑性塑料管道和接頭 安裝組件耐熱循環性的試驗方法 | Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
| EN 12295-1999 | 塑料管道系統 熱水和冷水用熱塑性塑料管道和接頭 接合處耐壓力循環試驗方法 | Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling |
| EN 12308-1998 | 液化天然裝置和設備 液化天然氣管道中所用的法蘭接頭墊圈設計適配性試驗 | Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping |
| EN 12345-1998 | 焊接 帶圖示的有關焊接接頭的多語種術語 | Welding - Multilingual terms for welded joints with illustrations |
| EN 12512-2001 | 原木結構 試驗方法 機械緊固件形成接頭的循環試驗 | Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners |
| EN 12517-1998 | 焊縫的無損檢驗 焊接接頭放射線檢驗 驗收等級 | Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels |
| EN 12560-1-2001 | 法蘭和其接頭 指定等級的法蘭墊片 第1部分：帶或不帶墊圈的非金屬法蘭墊片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
| EN 12560-2-2001 | 法蘭和其接頭 指定等級的法蘭墊片 第2部分：鋼制法蘭用螺旋形墊片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
| EN 12560-3-2001 | 法蘭和其接頭 指定等級的法蘭墊片 第3部分：非金屬PTFE封套墊片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
| EN 12560-4-2001 | 法蘭和其接頭 指定等級的法蘭墊片 第4部分：鋼法蘭用波紋狀、平或插榫金屬墊片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
| EN 12560-5-2001 | 法蘭和其接頭 指定等級的法蘭墊片 第5部分：鋼法蘭用金屬環接合墊片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metallic ring joint gaskets for use with steel flanges |
| EN 12573-4-2000 | 靜態無壓焊接熱塑料罐 第4部分：法蘭接頭的設計和計算 | Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints |
| EN 1277-1996 | 塑料管道系統 地下無壓用熱塑管道系統 彈性密封環型接頭密封性試驗方法 | Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
| EN 12797-2000 | 銅焊 銅焊接頭的破壞性試驗 | Brazing - Destructive tests of brazed joints |
| EN 12799-2000 | 銅焊 銅焊接頭的破壞性試驗 | Brazing - Non-destructive examination of brazed joints |
| EN 1281-1-1997+A1-1998 | 麻醉和呼吸設備 圓錐形接頭器 第1部分：錐體和錐套 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets |
| EN 1281-2-1995 | 麻醉和呼吸設備 圓錐形接頭 第2部分：螺紋承重連接頭 | Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:1987 modified) |
| EN 12814-1-1999+AC-2003 | 熱塑性塑料半成品的焊接接頭試驗 第1部分：彎曲試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test |
| EN 12814-2-2000 | 熱塑性塑料半成品的焊接接頭試驗 第2部分：拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test |
| EN 12814-3-2000 | 熱塑性塑料半成品的焊接接頭試驗 第3部分：拉伸蠕變?cè)囼?yàn) | Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test |
| EN 12814-4-2001 | 熱塑性塑料半成品的焊接接頭試驗 第4部分：剝落試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test |
| EN 12814-5-2000 | 熱塑性塑料半成品的焊接接頭試驗 第5部分：目測 | Testing of welded joints of thermoplastics semi-finished - Part 5: Macroscopic examination |
| EN 12814-6-2000 | 熱塑性塑料半成品的焊接接頭試驗 第6部分：低溫拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test |
| EN 12814-7-2002 | 熱塑性塑料半成品的焊接接頭試驗 第7部分：采用腰形試樣的拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
| EN 12814-8-2001+AC-2003 | 熱塑性塑料半成品的焊接接頭試驗 第8部分：要求 | Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements |
| EN 13090-2000 | 建筑物中氣體管道螺紋接頭再密封方法 | Means for resealing threaded joints of gas pipework in buildings |
| EN 13100-1-1999 | 熱塑性塑料半成品焊接接頭的無損檢驗 第1部分：外觀檢查 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination |
| EN 1636-5-1997 | 無壓力排水和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第5部分：針對接頭 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints |
| EN 1707-1996 | 注射器、針頭和其它醫療器械用有6%魯爾的錐形接頭 鎖緊接頭 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings |
| EN 1708-1-1999 | 焊接 鋼件的焊接接頭基礎詳細資料 第1部分：壓力用途部件 | Welding - Basic weld joint details in steel - Part 1: Pressurized components |
| EN 1708-2-2000 | 焊接 鋼件的焊接接頭基礎詳細資料 第2部分：無內部壓力用途部件 | Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components |
| EN 1712-1997 | 焊接無損檢驗 焊接接頭超聲波檢測 驗收水平 | Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels |
| EN 1714-1997 | 焊接無損檢驗 焊接接頭超聲檢驗 | Non destructive examination of welds - Ultrasonic examination of welded joints |
| EN 1736-2000 | 制冷系統和熱泵 軟管元件 振動隔離器和伸縮接頭 要求、設計和安裝 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation |
| EN 1737-1998 | 高壓多孔混凝土或開放結構輕集料混凝土預制件用鋼筋板或框架焊接接頭剪切強度的測定 | Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1739-1998 | 高壓多孔混凝土或開放結構的輕集料混凝土制預制件之間接頭內面力的剪切強度的測定 | Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1741-1998 | 高壓多孔混凝土或開放結構的輕集料混凝土制預制件之間接頭的外面力的剪切強度的測定 | Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 175201-804-1999 | 詳細規范：圓形連接器 螺紋接頭直徑為1.6mm的圓接觸件 | Detail specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
| EN 1759-3-2003 | 法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第2部分：銅合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges |
| EN 1759-4-2003 | 法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第4部分：鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 1989-2000 | 熱塑性管道系統 埋地?zé)o壓污水用接頭 通過估計密封壓力對熱塑彈性塑料(TPE)密封接頭的長時間密封性能的試 | Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
| EN 20594-1-1993+A1-1997+AC-1996 | 注射器、針頭及其他醫療器械為6%（魯爾）的錐形接頭 第1部分：一般要求 | Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment; part 1: general requirements (ISO 594-1:1986) |
| EN 25817-1992 | 鋼弧焊接頭 缺點質量分級指南 | Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992) |
| EN 25821-1991 | 電阻點焊電極帽接頭 | Resistance spot welding, electrode caps (ISO 5821:1979) |
| EN 2591-217-2002 | 航空航天系列 光電連接元件 試驗方法 第217部分：.在規定接線接片和在線接頭電流內的電壓降 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices |
| EN 2591-218-2002 | 航空航天系列 光電連接元件 試驗方法 第２１８部分：溫度和電流循環變化使接線按片和在線接頭引起老化 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling |
| EN 2591-219-2002 | 航空航天系列 光電連接元件 試驗方法 第２１９部分：絕緣接線按片和在線接頭電壓強度 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices |
| EN 26891-1991 | 木材結構 機械緊固件接頭 強度和變形特性測定的一般原則 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
| EN 26922-1993 | 粘合劑 對接頭抗拉強度的測定 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987) |
| EN 28430-1-1992 | 電阻點焊 電極夾具 第1部分：錐形接頭錐度1:10 | Resistance spot welding- Electrode holders- Part 1: Taper fixing 1:10 (ISO 8430-1:1988) |
| EN 28970-1991 | 木材結構 機械緊固件接頭的試驗 對木材密度要求 | Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:1989) |
| EN 295-1-1991+AA1-1996+A2-1996+A3-1999 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第1部分：要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 1: requirements |
| EN 295-2-1991+A1-1999 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第2部分：質量控制和取樣 | Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 2: quality control and sampling |
| EN 295-3-1991+A1-1998 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第3部分：試驗方法 | Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 3: test methods |
| EN 295-4-1995+AC-1998 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第4部分：專用配件、管接頭和配套附件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adaptors and compatible accessories |
| EN 295-5-1994+A1-1999 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第5部分：帶孔的陶瓷粘土管及配件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated virtrified clay pipes and fittings |
| EN 295-6-1995 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第6部分：陶瓷粘土檢修孔的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes |
| EN 295-7-1995 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第7部分：管托起用陶瓷粘土管和接頭的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking |
| EN 30042-1994 | 鋁和鋁焊合金弧焊接頭 缺陷質量分級指南 | Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992) |
| EN 3082-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′修理用焊接端的艙壁管接頭 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, bulkhead welded end, for repair |
| EN 3083-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′修理用長焊接端艙壁管接頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded end, for repair |
| EN 3084-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′修理用焊接端螺紋管接頭 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, welded end threaded for repair |
| EN 3244-2001 | 航空航天系列 鈦合金管連接件8°30′雙端口管接頭 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, double ended |
| EN 3245-2001 | 航空航天系列 鈦合金管連接件8°30′ 異徑管接頭 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, reducer |
| EN 3246-2001 | 航空航天系列 鈦合金管連接件8°30′艙壁管接頭 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead |
| EN 3247-2001 | 航空航天系列 鈦合金管連接件8°30′艙壁焊接端管接頭 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead welded end |
| EN 3248-2001 | 航空航天系列 鈦合金管連接件8°30′帶鎖異徑管端管接頭 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Adaptors, reduced pipe end, with lockring |
| EN 3273-2001 | 航空航天系列 鈦合金管連接件8°30′ 帶動態梁密封端的彎管、十字管和三通接頭 幾何結構 | Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for elbows, tees and crosses; Geometric configuration |
| EN 3566-2001+AC-2003 | 航空航天系列 鈦合金管連接件8°30′具有鎖環的管接頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Adaptors with lockring |
| EN 3690-2001+AC-2003 | 航空航天系列 鈦合金管連接8°30′長艙壁管接頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long |
| EN 3691-2001+AC-2003 | 航空航天系列 鈦合金管連接8°30′長焊艙壁管接頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded |
| EN 4026-2001 | 航空航天系列 鈦合金管連接 8°30′三通接頭 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees |
| EN 4186-2001 | 航空航天系列 鈦合金管連接8°30′四通管接頭 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, cross |
| EN 4233-2001 | 航空航天系列 鈦合金管連接 8°30′ 焊接螺紋管接頭 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, welded, threaded |
| EN 4552-2003 | 航空航天系列 耐熱鋼37度球形聯管節 焊接直接頭 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight nipples, welded end; Inch series |
| EN 4553-2003 | 航空航天系列 耐熱鋼37度球形聯管節 焊接90度彎接頭 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Elbow 90?nipples, welded end; Inch series |
| EN 4554-2003 | 航空航天系列 耐熱鋼37度球形聯管節 直螺紋管接頭 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight unions, threaded; Inch series |
| EN 4557-2003 | 航空航天系列 耐熱鋼37度球形聯管節 焊末端T形接頭 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Tees nipples, welded end; Inch series |
| EN 4563-2003 | 航空航天系列 耐熱鋼焊接聯管節 T形接頭 英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees; Inch series |
| EN 489-2003 | 熱水分配管道 地下熱水網用預隔熱包覆的管道系統 成套鋼鐵管道設備的接頭組件、聚氨酯熱絕緣和聚乙烯外 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 512-1994+A1-2001 | 纖維水泥制品 壓力管道和接頭 | Fibre-cement products - Pressure pipes and joints |
| EN 514-2000 | 門窗建造用未增塑聚氯乙烯型材 焊接彎頭和T型接頭強度的測定 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T joints |
| EN 545-2002 | 給水管道用球墨鑄鐵管、配件、附件及其接頭 要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 598-1994 | 污水工程用球墨鑄鐵管、配件、附件和其它接頭 要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods |
| EN 60239-1997 | 電弧爐用帶螺紋座的圓柱形機制石墨電極和接頭的標稱尺寸 | Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces (IEC 60239:1997) |
| EN 60512-11-13-2002 | 電子設備用連接器 試驗和測量 第11-13部分：氣候試驗 試驗11n:氣密 無焊包封接頭 | Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test 11n: Gas tightness, solderless wrapped connections (IEC 60512-11-13:2002) |
| EN 60874-17-1997 | 光纖和電纜的接頭 第１７部分：纖維光學接頭的部分規范 F-05型(磨擦鎖定) | Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996) |
| EN 61073-1-2000 | 光纖光纜機械式接頭和熔接式接頭保護盒 第1部分：通用規范 | Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification (IEC 61073-1:1999) |
| EN 639-1994 | 包括接頭和配件的混凝土壓力管的通用要求 | Common requirements for concrete pressure pipes including joints and fittings |
| EN 640-1994 | 包括接頭和配件的鋼筋混凝土壓力管和分布式鋼筋混凝土壓力管(非圓柱型) | Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings |
| EN 641-1994 | 包括接頭和配件的圓柱型鋼筋混凝土壓力管 | Reinforced concrete pressure pipes, cylinder type, including joints and fittings |
| EN 642-1994 | 包括接頭、配件的圓柱型和非圓柱型預應力混凝土壓力管和預應力鋼管的特殊要求 | Prestressed concrete pressure pipes, cylinder and non-cylinder type, including joints, fittings and specific requirement for prestressing steel for pipes |
| EN 74-1988 | 用于由鋼管制造的工作腳手架和工作架的管接頭、活動套管和底板 要求和試驗程序 | Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes; Requirements and test procedures |
| EN 751-1-1996 | 接觸第1、2、3家庭用燃?xì)夂蜔崴慕饘俾菁y接頭的密封材料 第1部分：氣密連接 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| EN 751-2-1996 | 接觸第1、2、3家庭用燃?xì)夂蜔崴慕饘俾菁y接頭的密封材料 第2部分：非硬化連接 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| EN 751-3-1996+AC-1997 | 接觸第1、2、3家庭用燃?xì)夂蜔崴慕饘俾菁y接頭的密封材料 第3部分：非燒結過的聚四氟乙烯密封帶 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
| EN 804-1994 | 塑料管道系統 壓力管道溶焊接頭的噴射鑄造插接部件 瞬時內部液壓阻力的試驗方法 | Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
| EN 850-1996+A1-2000+AC-1998 | 可移動氣瓶 醫用樞接軛狀閥門出口接頭 | Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use |
| EN 876-1995 | 金屬材料焊接的破壞試驗 熔焊接頭中焊接金屬的縱向拉伸試驗 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| EN 877-1999 | 建筑物排水用鑄鐵管和配件及其接頭和附件 要求、試驗方法和質量保證 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance |
| EN 911-1995 | 塑料管道系統 熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭 外部液壓條件下防漏密封試驗方法 | Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
| EN 969-1995+A1-1998 | 煤氣管道用球墨鑄鐵管、配件、附件及其接頭 要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| EN ISO 10321-1996 | 土工布 寬條樣法對接頭/接縫的拉身試驗 | Geotextiles - Tensile test for joints/seams by wide-width method (ISO 10321:1992) |
| EN ISO 10692-1-2001 | 氣瓶 微電子工業用氣瓶閥接頭 第1部分：出口接頭 | Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001) |
| EN ISO 10692-2-2001 | 氣瓶 微電子工業用氣瓶閥接頭 第2部分：氣瓶閥接頭的規范和定型試驗 | Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001) |
| EN ISO 11144-1996 | 牙科設備 供水及排水管接頭 | Dental equipment - Connections for supply and waste lines (ISO 11144:1995) |
| EN ISO 1120-2002 | 輸送帶 機械接頭的強度測定 靜態試驗法 | Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002) |
| EN ISO 11446-2002 | 乘用車和具有12伏電壓系統的輕型商用車 牽引車和掛車之間的13極連接器的尺寸和接頭的分布 | Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation (ISO 11446:1995 and Amd. 1:1997) / Note: To be replaced by prEN ISO 11446 (2003-10). |
| EN ISO 13919-1-1996 | 焊接 電子束和激光焊接頭 缺陷的質量分級指南 第1部分：鋼 | Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
| EN ISO 13919-2-2001 | 焊接 電子束和激光焊接頭 缺陷的質量分級指南 第2部分：鋁及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 15614-8-2002 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第8部分：管對管板接頭焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) |
| EN ISO 15785-2002 | 技術制圖 粘接接頭、折疊接頭和壓接頭的符號表示與標示 | Technical drawings - Symbolic presentation and indication of adhesive, folded and pressed joints (ISO 15785:2002) |
| EN ISO 5183-1-2000 | 電阻焊設備 外錐度1:10電極接頭 第1部分：錐度1:10圓錐形接頭 | Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998) |
| EN ISO 5183-2-2001 | 電阻點焊設備 外錐度1:10電極接頭 第2部分：端推力電極用平行柄接頭 | Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000) |
| EN ISO 5620-1-1996 | 造船及海上結構物 飲水艙的注水接頭 第1部分：一般要求 | Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements (ISO 5620-1:1992) |
| EN ISO 5620-2-1996 | 造船及海上結構物 飲水艙的注水接頭 第2部分：零件 | Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components (ISO 5620-2:1992) |
| EN ISO 5828-2001 | 電阻焊設備 連接水冷接頭的二次連接電纜 尺寸及特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001) |
| EN ISO 8092-1-1998 | 道路車輛 車載電氣線束的連接 第1部分：?jiǎn)螛O連接接頭 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996) |
| EN ISO 8092-3-1999 | 道路車輛 車載電氣線束的連接 第3部分：多極連接接頭 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996) |
| EN ISO 8434-1-1997 | 用于流體傳動和一般用途的金屬管接頭 第1部分：24度縮式管接頭 | Metallic tube connections for fluid power and general use - Part 1: 24 degrees compression fittings (ISO 8434-1:1994) |
| EN ISO 8434-4-2000 | 用于流體傳動和一般用途的金屬管接頭 第4部分：帶O形圈焊接接頭體的24度錐形管接頭 | Metallic tube connections for fluid power and general use - Part 4: 24?degrees cone connectors with O-ring weld-on nipples (ISO 8434-4:1995) |
| EN ISO 9692-2-1998 | 焊接和相關工藝 接頭的制備 第2部分：鋼的埋弧焊 | Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) |
| EN ISO 9692-3-2001 | 焊接和相關工藝 接頭制備的建議 第3部分：鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| EN ISO 9692-4-2003 | 焊接和相關工藝 接頭制備的建議 第4部分：復合鋼 | Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003) |
| prEN 1016-1993 | 塑料管道系統 非可塑聚氯乙烯一端受載的雙孔接頭 彎曲和內部壓力時的密封性和強度試驗方法 | Plastics piping systems; unplasticized poly(vinyl chloride) (PVC-U) end-load bearing double socket joints; test method for leaktightness and strength while subjected to bending and internal pressure |
| prEN 10311-1999 | 傳送人類消耗的含水液體（包括水）的鋼管和接頭間的連接件 | Joints for the connection of steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption |
| prEN 10329-2002 | 岸上和海上管路鋼管及配件 外表安裝接頭涂層 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| prEN 1115-2-1997 | 壓力下地下排水和排污裝置用塑料管道系統 基于非飽和聚酯樹脂的玻璃增強熱固性塑料（GRP） 第2部分：具撓 | Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| prEN 12560-6-2003 | 法蘭和其接頭 指定等級的法蘭墊片 第６部分：鋼法蘭用有鋸齒的金屬墊片 | Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for uses with steel flanges |
| prEN 12560-7-2001 | 法蘭和其接頭 指定等級的法蘭墊片 第７部分：鋼法蘭用有金屬套的墊片 | Flanges and their joints - Dimensions of gaskets for Class designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
| prEN 12927-1-1997 | 索道客運的安全要求 鋼索 第1部分：鋼索及其端部接頭的選擇準則 | Safety requirements for passenger transport by rope - Ropes - Part 1: Selection criteria for ropes and their end fixings |
| prEN 12927-4-2001 | 索道客運的安全要求 鋼索 第4部分：端部接頭 | Safety requirements for passenger transportation by rope - Ropes - Part 4: End fixing |
| prEN 13100-2-2002 | 熱塑性塑料半成品焊接接頭的無損檢驗 第2部分：X射線檢查法 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing |
| prEN 13100-3-2002 | 熱塑性塑料半成品焊接接頭的無損檢驗 第3部分：超聲檢測 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 3: Ultrasonic testing |
| prEN 1336-1993 | 塑料管道系統 熱塑性壓力管道用終端承載和無承開組件和接頭 內部水壓力下長期密封性試驗方法 | Plastics piping systems; end-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping; test method for long-term leaktightness under internal water pressure |
| prEN 13476-1-2002 | 非壓力地下排水和污水熱塑性塑料管道系統 聚氯乙烯（PVC-U）、聚丙烯（PP）)和聚已烯（PE）的結構墻管道系 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for pipes, fittings and the syste |
| prEN 13763-7-2003 | 民用炸藥 雷管和繼電器 第7部分：引線、沖擊管、接頭、卷邊和封閉機械強度的測定方法 | Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures |
| prEN 14257-2001 | 粘合劑 木材粘合劑 高溫下搭接頭的拉力強度的測定 | Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT91) |
| prEN 14258-2001 | 粘合劑 在特殊溫度條件下接頭長時和短時期暴露的機械性能 | Adhesives - Mechanical behaviour of joints subjected to short and long terms exposure at specified conditions of temperature |
| prEN 14364-2002 | 有或無壓排水和排污塑料管線系統 玻璃纖維增強的未飽和的聚酯樹脂基熱固塑料管 塑料管管件及接頭規范 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| prEN 1636-2-1996 | 無壓力排水道和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第2部分：帶有撓 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| prEN 1759-1-2000 | 法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第1部分：鋼法蘭NPS1/2到24 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| prEN 1763-2-2000 | 供氣相丙烷和丁烷使用的撓性軟管、管道及組裝件 第2部分：對管咀接頭及組裝件的要求 | Flexible hose, tubing and assemblies for use with propane and butane in the vapour phase - Part 2: Requirements for nozzles, couplings and assemblies |
| prEN 1796-2-1995 | 有或無壓力供水用塑料管道系統 非飽和性聚脂樹脂基玻璃增強熱固性塑料 第2部分：帶撓性、縮口活節或剛性 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| prEN 185000-1992 | 通用規范：光學接頭和光纜用光纖接頭硬件 | Generic specification: fibre optic splice hardware for optical splices and cables |
| prEN 2591-220-2000 | 航空航天系列 光電連接元件 試驗方法 第２２０部分：電流和溫度循環變化使接觸端／導線接頭老化 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| prEN 2608-1999 | 航空航天系列 鎖環螺紋式8°0′管接頭的安裝和拆卸要求 | Aerospace series - Installation and removal requirements for 8?0 adaptoros, threaded with lockring |
| prEN 295-10-2001 | 排水管和下水道用陶瓷粘土管和管配件及管接頭 第10部分：強制要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Mandated requirements |
| prEN 3079-1999 | 航空航天系列 管連接件8°30′ 直到 28000 kPa 異形接頭米制系列 技術規范 | Aerospace series - Pipe coupling 8?30 up to 28000 kPa - Adaptors - Metric series - Technical specifiations |
| prEN 60603-7-4-2003 | 電氣設備接頭 第7-4部分：用于數據傳輸頻率高達 250 MHz (第 6類, 未屏蔽)的8道活動和固定接頭的技術規范 | IEC 60603-7-4, Ed. 1.0: Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| prEN 61076-2-101-2003 | 電子設備用連接器 第2-101部分：低壓、開關和控制裝置用帶有M8和M12螺旋接頭以及彈簧鎖的圓形連接器的空白 | Connectors for electronic equipment - Part 2-101: Circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications |
| prEN 630-1992 | 鋁及其焊接合金中的電弧焊接頭 缺陷質量級別指南 | Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections (ISO/DIS 10042 modified) |
| prEN 762-1995 | 塑料管道和導管系統 熱塑系統用彈性密封接頭 密封環保持力和損壞的試驗方法 | Plastics piping and ducting systems - Joints with elastomeric seals for thermoplastic systems - Test method for retention of, and damage to, sealing rings |
| prEN ISO 14617-3-2002 | 圖表用圖形符號 第3部分：接頭及相關裝置 | Graphical symbols for diagrams - Part 3: Connections and related devices (ISO/FDIS 14617-3:2002) |
| prEN ISO 15236-4-2000 | 鋼芯傳輸帶 第4部分：硫化橡膠傳輸帶接頭、設計、尺寸、要求、標記 | Steel cord conveyor belts - Part 4: Vulcanized belt joints; Design, dimensions, requirements, marking (ISO/DIS 15236-4:2000) |
| prEN ISO 15875-3-2002 | 冷熱水塑料管道系統 交聯聚乙稀（ PE - X ） 第3部分：接頭 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO/FDIS 15875-3:2002) |
| prEN ISO 15876-3-2002 | 冷熱水塑料管道系統 聚丁稀（ PB ） 第3部分：接頭 | Plastics piping systems for hot and cold water installations - Polybutylen (PB) - Part 3: Fittings (ISO/FDIS 15876-3:2002) |
| prEN ISO 15877-3-2002 | 冷熱水用塑料管道系統 氯化聚氯乙烯（PVC-C）第3部分：接頭 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO/FDIS 15877-3:2002) |
| prEN ISO 9018-2003 | 金屬材料焊縫的破壞性試驗 十字形與重疊 形接頭的拉力試驗 | Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO/FDIS 9018:2003) |
| prEN ISO 9692-1-2003 | 焊接和相關工藝 接頭制備的推薦工藝 第1部分：鋼的人工電弧焊、氣體保護金屬電弧焊、氣焊和束焊 | Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO/FDIS 9692-1:2003) |
| 編號 | 中文名稱 | 英文名稱 |