| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 11851-1998 | 食品,化學和醫藥工業用管接頭.不銹鋼制螺紋管連接件.滾壓和焊接連接的設計 | Fittings for food, chemical and pharmaceutical industry - Stainless steel screwed pipe connections - Design for rolling in and welding-on |
| DIN 11852-2009 | 食品業、化工業用裝置 不銹鋼裝置 焊接用三通管、彎頭和異徑接頭 | Fittings for the food and chemical industries - Fittings of stainless steel - Tees, bends and reducers for welding |
| DIN 11854-1991 | 食品工業用管配件.不銹鋼制軟管.帶螺紋的軟管接頭和軟管錐形接頭 | Food industry fittings; hose unions of stainless steel; threaded hose couplings, conical hose couplings |
| DIN 11865-2003 | 無菌、化學工業和藥業用不銹鋼配件.焊接用三通管、彎頭和異徑接頭 | Stainless steels fittings for aseptic, chemical and pharmaceutical industries - Tees, bends, reducers for welding on |
| DIN 11887-1998 | 食品,化學和醫藥工業用管接頭.圓螺紋連接件.螺紋連接件和錐形連接件的設計 | Fittings for food, chemical and pharmaceutical industry - Round thread connections - Design of threaded and conical connection pieces |
| DIN 12257-1981 | 實驗室玻璃儀器.轉換接頭 | Laboratory glassware; adapters |
| DIN 12263-1963 | 球形磨制接頭用夾子 | Clamps for spherical-ground joints |
| DIN 12784-1984 | 實驗室玻璃儀器.帶可互換磨口接頭的溫度計 | Laboratory glassware; thermometers with interchangeable ground joint |
| DIN 13090-4-1986 | 醫療器械用錐形接頭.（經尿道前列腺）切除器用鎖緊接頭 | Conical fittings for medical equipment; lock fittings for resectoscopes |
| DIN 1380-2001 | 小便池接頭.要求和試驗 | Connectors for urinals - Requirements and testing |
| DIN 14244-2003 | 地上和地下消防用抽水接頭 | Water suction connection for fire fighting - Under and above ground |
| DIN 14307-2-1986 | 抽吸用C型、標稱壓力16帶密封圈的鋁合金剛性接頭 | Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14308-2-1986 | 抽吸用B型、標稱壓力16帶密封圈的鋁合金剛性接頭 | Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14311-1985 | 標稱壓力為16抽吸和壓力用鋁合金消防水龍帶C型管接頭 | Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16 |
| DIN 14341-1986 | 標稱壓力為16的 鋁合金C-D型轉接接頭 | Aluminium alloy C-D-adaptor for nominal pressure 16 |
| DIN 14342-1986 | 標稱壓力為16的 鋁合金B(yǎng)-C型轉接接頭 | Aluminium alloy B-C-adaptor for nominal pressure 16 |
| DIN 14343-1986 | 標稱壓力為16 的鋁合金A-B型轉接接頭 | Aluminium alloy A-B-adaptor for nominal pressure 16 |
| DIN 14640-1974 | 消防設備.噴射器、帶孔軸、接頭的安裝 | Fire fighting equipment; fixing for projectors, boring pivot, joint |
| DIN 15325-1990 | 提升設備和服務提升設備.控制裝置，信號裝置和附加接頭 | Lifts and service lifts; control devices, signals and additional fittings; ISO 4190-5, edition 1987 modified |
| DIN 1565-1997 | 有軌車輛用鋼管配件.短管接頭.雙端短管接頭.過渡接頭 | Steel fittings for railway vehicles - Pipe nipples, double pipe nipples, swadged nipples |
| DIN 1566-1997 | 有軌車輛用鋼管配件.雙過渡接頭.縮徑雙端短管接頭 | Steel fittings for railway vehicles - Double nipples, reduced double nipples |
| DIN 1569-1997 | 有軌車輛用鋼管配件.直角彎頭.叉形接頭 | Steel fittings for railway vehicles - Elbows, Y-fittings |
| DIN 16450-1994 | 未增朔聚氯乙烯壓力管道的套管接頭.符號 | Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols |
| DIN 16867-1982 | 化工管路用玻璃纖維增強式聚酯樹脂管道、配件和接頭.交貨技術條件 | Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions |
| DIN 16872-1993 | 熱塑性塑料管道用管接頭組件.玻璃纖維增強的聚酯樹脂(UP-GE)法蘭.尺寸 | Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions |
| DIN 16928-1979 | 熱塑性塑料管道.管接頭、管道部件、管道敷設.一般說明 | Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions |
| DIN 16962-1-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.對焊用弓形結構彎頭.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions |
| DIN 16962-11-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.用于對焊的車削和壓制減徑管套.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16962-12-1999 | 聚丙烯(PP)制壓力管道用管連接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸緣接頭、法蘭、密 | Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16962-13-1987 | 1型和2型聚丙烯壓力管道用管連接件和接頭.管接頭.尺寸 | Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions |
| DIN 16962-2-1983 | 1型和2型聚丙烯壓力管道用管接頭組件和接頭.用對焊的分段嵌入和減頸方法制造的T型管及支管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16962-3-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.對焊用管成形彎頭.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions |
| DIN 16962-4-1988 | 1型和2型聚丙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16962-6-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑彎頭.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16962-7-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑三通.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 16962-8-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑管套和管帽.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16962-9-1983 | 1型和2型聚丙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-10-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑套筒與帽蓋.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16963-11-1999 | 聚乙烯(PE)制壓力管道用管連接件和零件.PE 80和PE 100.第11部分:承口焊接用凸緣接頭、法蘭、密封圈.尺寸 | Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16963-13-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.對焊用車削的和壓制的縮徑承接件.尺寸 | Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16963-14-1983 | 1型和2型高密度聚乙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-15-1987 | 高密度聚乙烯壓力管道用管連接件和接頭.管接頭.尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions |
| DIN 16963-2-1983 | 1型和2型高密度聚乙烯壓力管道用管接頭組件和配件.用對焊的分段嵌入和縮頸方法制造的T型管及支管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16963-3-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.對焊用彎管.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions |
| DIN 16963-4-1988 | 高密度聚乙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16963-8-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑彎管.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16963-9-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑三通管件.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 16966-2-1982 | 玻璃纖維增強式聚酯樹脂管道配件和接頭.彎管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions |
| DIN 16966-4-1982 | 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.三通噴管嘴尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions |
| DIN 16966-5-1982 | 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.縮徑管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions |
| DIN 16966-6-1982 | 玻璃纖維增強聚酯樹管(UP-GF)管件和接頭組件.卡圈、法蘭、密封圈、尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions |
| DIN 16966-8-1982 | 玻璃纖維增強聚酯管(UP-GF)管件和接頭.層壓塑料接頭.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions |
| DIN 16967-2-1982 | 玻璃纖維增強環氧樹脂(EP-GF)管件和接頭.彎管、三通管、尺寸 | Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions |
| DIN 18195-8-2004 | 建筑物的防水性.第8部分:活動連接接頭的防水性 | Water-proofing of buildings - Part 8: Water-proofing over joints for movements |
| DIN 18318-2006 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).道路建設.接頭易斷裂的方塊鋪石和混凝土路面及環境 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Dry-jointed sett and slab pavements, and surrounds |
| DIN 19004-1980 | 快門線點動開關螺紋.接頭和插口.連接尺寸 | Screw threads of shutter cable release; tip and socket, connecting dimensions |
| DIN 19560-10-1999 | 建筑物中耐熱的廢水和污物排放系統用聚丙烯(PP)管材和管接頭.第10部分:燃燒特性.質量控制和推薦標準 | Pipes and fittings made of polypropylene (PP) for hot water resistant waste and soil discharge systems inside buildings - Part-10: Fire behaviour, quality control and installation recommendations |
| DIN 19850-2-1996 | 纖維水泥污水管和接頭.第2部分:接頭尺寸 | Fibre cement pipes and fittings for sewers - Part 2: Dimensions of joints |
| DIN 20029-1990 | 軟管管接頭.1:3 錐度量規 | Hose fittings; 1:3 taper gauges |
| DIN 20035-1990 | 軟管管接頭.法蘭管嘴.公稱壓力16 | Hose fittings; flange nozzle; nominal pressure 16 |
| DIN 20036-1990 | 軟管管接頭.圓螺紋的管接頭套管 | Hose fittings; coupling nipples with round thread form |
| DIN 20037-1990 | 軟管管接頭.連接套管.尺寸 | Hose fittings; connecting nipple; dimensions |
| DIN 20038-1990 | 軟管管接頭.接頭管嘴 | Hose fittings; coupling nozzles |
| DIN 20040-1990 | 軟管管接頭.連接套管閥.公稱壓力16 | Hose fittings; nipple valves; nominal pressure 16 |
| DIN 21388-1988 | 繩索裝置.通用接頭 | Rope attachments; universal joints |
| DIN 22110-3-2007 | 輸送帶接頭的測試方法.第3部分:輸送帶接頭耐久性的測定(動態測試法) | Testing methods for conveyor belt joints - Part 3: Determination of time strength for conveyor belt joints (dynamical testing method) |
| DIN 22121-2000 | 煤礦用織物疊層輸送帶.單層或雙層帶的永久性連接接頭.尺寸、要求和標記 | Conveyor belts with textile plies for coalmining - Permanent joints for belts with one or two plies; dimensions, requirements, marking |
| DIN 22418-1989 | 礦山預防潛在的爆炸環境用的電氣設備；螺旋接頭.安全性要求和試驗 | Electrical apparatus for potentially explosive atmospheres for mining; screw plugs; safety requirements and testing |
| DIN 22419-2-2004 | 用于潛在爆炸性環境的采掘電氣裝置.電纜引入線.第2部分:引入線用密封接頭.安全要求和檢驗 | Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 2: Gland adaptors for entries; safety requirements and testing |
| DIN 22434-3-2003 | 無煙煤地下開采照明.照明.技術規劃基礎.第3部分:T 形接頭 | Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 3: T-junctions |
| DIN 2353-1998 | 帶環套的非焊接壓力連接接頭.完全壓連接和概述 | Non-soldering compression fittings with cutting ring - Complete fittings and survey |
| DIN 28030-1-2003 | 容器和加工裝置用法蘭接頭.第1部分:帶法蘭的設備用容器 | Flanged joints for vessels and process apparatus - Part 1: Apparatus flanged vessels |
| DIN 28139-1-1985 | 搪瓷容器的焊接頸.夾緊螺紋接頭的H形主法蘭.尺寸 | Welding necks for glass lined vessels; form H main flanges for clamp screw connections; dimensions |
| DIN 28145-5-1995 | 搪玻璃鋼攪拌容器用焊接件.第5部分:底部泄料孔處絕緣接頭 | Parts welded to glass lined steel agitator vessels - Part 5: Insulation collar at the bottom discharge opening |
| DIN 28601-2000 | 延性鑄鐵管道和配件.螺紋套管接頭.組件、套管、螺絲環、密封環和滑動環 | Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings |
| DIN 28602-2000 | 球墨鑄鐵管及管件.栓接壓蓋密封接頭.組件、套管、中間環、密封圈、螺栓和螺母 | Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts |
| DIN 2880-1999 | 鑄鐵管、鋼管和管接頭的水泥砂漿管襯料的應用 | Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
| DIN 30658-1-1998 | 地下煤氣管道接頭附加密封材料.第1部分:已密封煤氣管道附加密封用塑料薄膜和織物襯套.安全要求和試驗 | Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing |
| DIN 30658-2-1999 | 地下煤氣管道用后續密封材料.第2部分:地下煤氣管道接頭用后續密封材料.安全要求和試驗 | Materials for the subsequent sealing of underground gas mains - Part 2: Materials for the subsequent sealing of joints in underground gas mains; safety requirements and testing |
| DIN 30670-1991 | 鋼管和管接頭的聚乙烯涂層.要求和試驗 | Polyethylen coatings of steel pipes and fittings; requirements and testing |
| DIN 3159-1965 | 標稱壓力25以下的制冷設備接頭法蘭的安裝尺寸 | Assembling dimensions of flanges for fittings for refrigerating installations up to nominal pressure 25 |
| DIN 3281-1988 | 家用供水管道的閥門.公稱壓力10的錐形管子接頭.概述 | Valves for domestic water supply; tapered union nipples nominal pressure 10; survey |
| DIN 3289-1988 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的錐形管子接頭 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples |
| DIN 3292-1-1984 | 家用安裝設備配件.有色金屬活接頭螺母 | Fittings for domestic installation; nonferrous metal union nuts |
| DIN 3292-2-1984 | 家用安裝設備配件.可鍛鑄鐵活接頭螺母 | Fittings for domestic installation; malleable cast iron union nuts |
| DIN 3334-1968 | 帶法蘭接頭的加熱裝置用混合閥.標稱壓力為6、最高溫度110 ℃的三通混合閥、四通混合閥.安裝尺寸 | Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions |
| DIN 3383-4-1991 | 軟管組件和連接配件.煤氣用安全連接配件和試驗室管路用接頭 | Hose assemblies and connection fittings; safety connection fittings for gas and couplings for laboratory tubing |
| DIN 3387-2-1991 | 煤氣管道用帶法蘭接頭的金屬管道管連接件 | Tube connections for metallic tubes having flanged ends for gas pipes |
| DIN 3389-1984 | 進宅供氣和供水管路安裝用商品絕緣接頭.要求和檢驗 | Isolating joints ready for installation into service pipes in gas and water supply; built-in-isolating joints; requirements and tests |
| DIN 3475-1993 | 未處理水和可飲用水用的球墨鑄鐵管閥和管接頭.內部涂搪瓷防腐蝕.質量要求和試驗 | Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing |
| DIN 3476-1996 | 生水和飲用水用閥門和接頭.粉漆及環氧內涂防腐層.要求和檢驗 | Valves and fittings for untreated and potable water - Protection against corrosion by internal epoxy coating of coating powders (P) or liquid varnishes (F) - Requirements and tests |
| DIN 3533-1981 | 煤氣裝置用閥門.帶壓力接頭的角度型旋閥 | Valves for gas installations; angle pattern stop cocks with compression fitting |
| DIN 3534-1982 | 氣體裝置閥.帶壓緊接頭的直通型龍頭 | Valves for gas installations; straight pattern taps with compression fitting |
| DIN 3538-1986 | 煤氣裝置閥門.蝶型閥.內螺紋接頭 | Valves for gas installations; butterfly valves; female threaded ends |
| DIN 3799-1975 | 鐵路及道路車輛集裝箱連接件.接到標稱直徑80至100的螺紋接套上的5.5英寸減徑接頭 | Couplings for railway- and truck containers; reducers adapting 5<(hoch)1>/<(Index)2> inch to nipples nominal size 80 and 100 |
| DIN 3850-1998 | 壓力連接管接頭.概述 | Compression fittings - Summary |
| DIN 3852-11-1994 | 壓合接頭、閥門、螺旋塞和E型螺紋管堵用螺紋管堵和螺紋孔.設計尺寸 | Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions |
| DIN 3853-2001 | 非釬焊和釬焊壓合接頭.與管接螺母使用的雙頭螺栓端部.設計圖 | Non-soldering and soldering compression fittings - Stud ends for use with union nut; Design sheet |
| DIN 3854-1995 | 非釬焊和釬焊壓緊聯軸節.套管接頭用螺紋孔.建造單 | Non-soldering and soldering compression couplings - Tapped holes for socket unions - Construction sheet |
| DIN 3861-2002 | 非焊螺旋活接頭.卡套.設計 | Non-soldering compression fittings - Compression rings - Design |
| DIN 3865-2002 | 壓合接頭.符合 DIN EN ISO 8434-1 的壓接用帶 'O' 型密封圈的24度螺紋接頭 | Compression fittings - Nipple 24° with O-ring - For compression joint according to DIN EN ISO 8434-1 |
| DIN 3866-1990 | 制冷.螺紋堵塞.額定用于40公稱壓力的非釬焊壓緊管接頭的90°擴口法蘭 | Refrigeration; threaded stem; 90° flared flanges for solderless compression couplings rated for PN 40 |
| DIN 3870-2001 | 非釬焊和釬焊壓合接頭.管接螺母系列LL | Non-soldering and soldering compression fittings - Union nuts series LL |
| DIN 3871-1995 | 非釬焊和釬焊壓緊聯軸節.套管接頭 | Non-soldering and soldering compression couplings - Socket unions |
| DIN 3872-2003 | 非焊接壓緊聯軸節.對接結構活接頭螺母 | Non-soldering compression couplings - Union nuts for butt joints |
| DIN 3901-2001 | 帶切割環的非釬焊壓合接頭.鈍端A型帶平行螺紋的雙鈍端接頭 | Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel thread for stub ends type A |
| DIN 3904-1987 | 橢圓形壓接管接頭.螺柱式插接肘節管 | Olive type compression couplings; male stud elbows |
| DIN 3907-1987 | 橢圓形壓接管接頭..螺柱式插接三通管接頭（螺柱分管） | Olive type compression couplings; male stud tees (stud branch) |
| DIN 3914-1987 | 橢圓形壓接管接頭.螺柱式插接三通管接頭（螺柱插接） | Olive type compression couplings; male stud tees (stud run) |
| DIN 3942-2002 | 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用可調節的帶24度錐形聯接器和 'O' 型密 | Non-soldered compression fittings - Swivel elbows with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3943-2002 | 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用可調節的帶24度錐形聯接器和 'O' 型密 | Non-soldered compression fittings - Swivel branch tees with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3944-2002 | 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用可調節的帶24度錐形聯接器和 'O' 型密 | Non-soldered compression fittings - L-adaptors with 24° cone connectors and O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3945-2002 | 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用帶24度錐形聯接器和 'O' 型密封圈的直 | Non-soldered compression fittings - Straight stud swivel adaptor with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3946-2002 | 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用帶24度錐形聯接器和 'O' 型密封圈的直 | Non-soldered compression fittings - Straight reducing swivel adaptors with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3955-2001 | 帶切割環的非釬焊壓合接頭.柱螺栓端A型帶平行螺紋和軸桿的雙頭螺栓連接端 | Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel threads and shaft for stud ends type A |
| DIN 4000-80-2005 | 事物特性表.第80部分:螺紋接頭、冷成型絲錐和螺紋板牙 | Tabular layouts of properties - Part 80: Screwing tabs, cold forming taps and screwing dies |
| DIN 4060-1998 | 帶彈性密封件的下水道和污水管用接頭.對彈性密封件的接頭的要求和試驗 | Joints of sewer and drain pipes with elastomeric seals - Requirements and testing on joints with elastomeric seals |
| DIN 41652-3-1990 | φ1mm的圓形觸點、梯形機柜連接器.A型結構尺寸.室外布線用釬焊接頭 | Rack and panel connectors, trapezoidal, round contacts 1 mm; dimensions of type A; solder termination for free wiring |
| DIN 42017-1984 | 小型電動機線路接頭的配置和標記 | Marking and coordination of the connecting leads for small motors |
| DIN 42021-1-1976 | 步進電機.安裝尺寸、銘牌、電氣接頭 | Step motors; mounting dimensions, type plate, electrical connection |
| DIN 46199-5-1976 | 第5部分:定時繼電器的接頭標記 | Terminal markings of specified-time relays |
| DIN 46199-6-1974 | 電器開關設備.第6部分:壓力和溫度開關設備的接頭標記 | Electrical switchgear; terminal markings for pressure and temperature, sensitive devices |
| DIN 46228-2-1992 | 帶及不帶絕緣夾的壓接式端部接頭 | Crimp-type end-splices, with and without insulation grip |
| DIN 46228-3-1992 | 不帶絕緣夾的導線端部環繞接頭 | Conductor-embracing end-splices, without insulation grip |
| DIN 46267-1-1985 | 銅導線用非耐張力的壓制接頭 | Non tension-proof compression joints for copper conductors |
| DIN 46267-2-1985 | 鋁導線用非耐張力的壓制接頭 | Non tension-proof compression joints for aluminium conductors |
| DIN 46276-1-1991 | 第1部分:層狀柔性母線和扁接線端用膨脹接頭 | Expansion joints for busbars and flat terminals; lamellar flexible |
| DIN 46276-2-1991 | 第2部分:層狀高柔性母線和扁接線端用膨脹接頭 | Expansion joints for busbars and flat terminals; lamellar high flexible |
| DIN 46329-1983 | 鋁導線用環形壓接的電纜接頭耳 | Cable lugs; for compression connections, ring type, for aluminium conductors |
| DIN 46330-2-1981 | 接頭規格為２·８的無絕緣套的短插座 | Short receptacles; without insulating sleeve, for tab size 2,8 |
| DIN 46340-1-1981 | 接頭規格為２·８的快速插入插座 | Snap-in receptacles for tab size 2,8 |
| DIN 46340-3-1981 | 接頭規格為6·３的快速插入插座 | Snap-in receptacles for tab size 6,3 |
| DIN 46340-4-1981 | 接頭規格為９·５的快速插入插座 | Snap-in receptacles for tab size 9,5 |
| DIN 46340-5-1981 | 接頭規格為７·7的快速插入插座 | Snap-in receptacles for tab size 7,7 |
| DIN 47619-1-1979 | 通信電纜接頭.對稱多股絞合電纜 | Splicing of telecommunication cables; cable with symmetrical stranding components |
| DIN 47633-1984 | 通信電纜的同軸電纜接頭.要求和試驗 | Coaxial splices in telecommunication cables; requirements, tests |
| DIN 47635-1973 | 鑄造金屬電纜接頭用墊片槽和褶皺 | Gasket grooves and folds for cast-metal cable fittings |
| DIN 477-5-2002 | 氣瓶閥.第5部分:最大試驗壓力為450巴.出口接頭 | Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections |
| DIN 48069-2-1980 | 架空線路用帶保護接頭的雙環 | Double eyes with protective fitting, for overhead power lines |
| DIN 48085-1-1985 | 架空線路用銅導線的全拉力壓制接頭 | Full tension compression joints, for copper conductors, for overhead lines |
| DIN 48085-2-1985 | 架空線路用鋁導線的全拉力壓制接頭 | Compression connectors, restistant to high tensile stresses, for aluminium-conductors |
| DIN 48085-3-1985 | 架空線路用ACSR導線的全拉力壓制接頭 | Full tension compression joints, for ACSR-conductors, for overhead lines |
| DIN 48207-3-2005 | 額定電壓超過1KV的架空線.導體安裝的方法和設備.第3部分:帶球形接頭的電纜連接件 | Overhead lines with nominal voltages exceeding 1 kV - Methods and equipment for the installation of conductors - Part 3: Cable couples with spherical joint |
| DIN 49017-2-1981 | 電氣設備用導管和管接頭.剛性非火焰擴散絕緣導管和管接頭.輕壓力強度用帶接頭的光滑導管和帶接頭的彎頭 | Conduits and fittings for electrical installation; rigid nonflame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for light pressure strength |
| DIN 49020-1959 | 電線導管.帶螺紋鋼制導管、普通導管和管接頭 | Conduit for Electrical Wiring; Screwed Steel Conduit, Plain Conduit, Couplers |
| DIN 49023-1975 | 電氣設備用導管和接頭.柔性波紋鋼管 | Conduits and fittings for electrical installation; flexible corrugated conduits of steel |
| DIN 49360-3-1986 | D型熔斷器.第16部分:管接頭螺釘扳手用帶功能尺寸的 E 16 測量環 | D-type fuses; E 16 gauge rings with functional dimensions for adapter screw fitters |
| DIN 49985-1971 | 電照明接頭（發光設備）.玻璃燈泡的橡膠連接件 | Electric lighting fittings (luminaires); rubber joint for glass-globes |
| DIN 54455-1984 | 金屬粘合劑和金屬粘結接頭的檢驗.扭剪試驗 | Testing of adhesives for metals and of bonded metal joints; torsional shear test |
| DIN 5466-1-2000 | 花鍵接頭,載荷能力計算.第1部分:一般基礎 | Splined joints, calculation of load capacity - Part 1: General basis |
| DIN 57220-3-1977 | ≤1kV電力電纜設備中帶單個和多個絕緣件電纜接頭規范 | Specifications for single- and multiple cable clamps with insulating parts in electrical power cable installations up to 1000 V |
| DIN 58300-1982 | 外科器械接頭 | Joints for surgical instruments |
| DIN 58736-3-2001 | 光學加工.定心罩.第3部分:外連接用圓柱形接頭.尺寸12mm和25mm | Production in optical engineering - Centering bells - Part 3: With cylindrical fitting dimension 12 mm and 25 mm for outer connection |
| DIN 65030-1997 | 航空航天.帶截環的管螺紋接頭.交貨技術條件.對新設計無效 | Aerospace - Solderless tube fittings with coupling sleeves, flaveless - Technical specification; inactive for new design |
| DIN 65053-1992 | 航空航天.操縱鋼纜接頭.技術規范.不適用于新設計 | Aerospace; control cable fittings; technical specification; inactive for new design |
| DIN 6660-1996 | 風動管道系統.無增塑劑聚氯乙烯(硬聚氯乙烯)傳送管,傳送管彎頭和接頭 | Pneumatic tube systems - Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U) |
| DIN 68140-1-1998 | 木制指形接頭.第1部分:承載結構用軟木的指形接頭 | Wood finger-jointing - Part 1: Finger jointing of softwood for load-bearing structures |
| DIN 68601-2002 | 膠粘的木制品接頭.術語和定義 | Bonded wood joints - Terms and definitions |
| DIN 71428-1989 | 橢圓形壓接連接的管接頭.用聯管螺母連接的圓柱形螺紋旋入連接管 | Compression couplings with olives; cylindrical thread nipples for use with union nuts |
| DIN 71429-1989 | 橢圓形壓接連接的管接頭.用聯螺母連接的悶頭壓接聯接器的小螺柱和肘節管接頭 | Compression couplings with olives; bulkhead compression couplings small stud and elbow fittings for use with union nuts |
| DIN 71430-1989 | 橢圓形壓接連接的管接頭.用聯管螺母旋轉連的管接頭 | Compression couplings with olives; swiveling fittings for use with union nuts |
| DIN 71433-1989 | 橢圓形壓接連接的管接頭.用聯螺母連接的的三通管接頭和肘節管接頭 | Compression couplings with olives; T-fittings and elbow fittings for use with union nuts |
| DIN 71436-1989 | 橄欖形壓緊聯接器.與管接頭配用的空心螺釘管接頭和環形管接頭 | Compression couplings with olives; hollow screw fittings and ring connection fittings for use with union nuts |
| DIN 71752-1994 | 叉形接頭.叉頭 | Fork joints; yokes |
| DIN 71802-1992 | 帶開口簧環或不帶開口簧環的球形接頭 | Ball joints with or without circlips |
| DIN 71985-1-1982 | 控制裝置用纜索的內接頭.儲柜的內接頭 | Nipples for cables for controls; receiver nipple |
| DIN 71985-2-1982 | 控制裝置用纜索的管接頭.釬焊管接頭 | Nipples for cables for controls; nipples for soldering |
| DIN 71985-3-1982 | 控制裝置用纜索的內接頭.夾緊內接頭 | Nipples for cables for controls; clamping nipples |
| DIN 71985-4-1982 | 繩索傳動裝置的內接頭.第4部分:擠壓內接頭 | Nipples for cables for controls; nipples for swaging |
| DIN 71991-1982 | 控制裝置電纜用帶螺紋的接頭 | Threaded end-fittings for cables for controls |
| DIN 72535-1979 | 點火線圈和點火分電器用高壓接頭 | High tension connection for ignition coils and distributors |
| DIN 73353-1977 | 帶圓柱接頭的油浴式空氣濾清器 | Oil-wetted airfilters with cylindrical connection |
| DIN 74225-1991 | 液壓制動軟管組件.制動用軟管接頭.制動軟管夾 | Brake hose assemblies; brake hose fittings; brake hose clips |
| DIN 74304-1987 | 壓接管接頭.軟管接頭 | Compression coupling; hose coupling |
| DIN 74313-1-1994 | 非焊接壓縮管接頭.漸縮管.A型和B型 | Non-soldering compression fittings; reducers; type A and B |
| DIN 74313-2-1994 | 非焊接壓縮管接頭.漸縮管.C型和D型 | Non-soldering compression fittings; reducers; type C and D |
| DIN 7588-1994 | 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶內螺紋,另一端帶鋼管噴嘴、銅管噴嘴或套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7589-1994 | 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶外螺紋,另一端帶鋼管噴嘴、銅管噴嘴和套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7601-1998 | 帶球形襯套的壓接接頭.完整接頭和概述 | Compression couplings with ball-type nipples - Complete unions and survey |
| DIN 7632-1985 | 帶球面襯套的壓緊連軸器.變徑接頭 | Compression couplings with spherical liner; reducers |
| DIN 7633-2003 | 帶球襯的壓合接頭.釬焊用管接頭 | Compression fittings with spherical liners - Adapters for brazing |
| DIN 7637-1985 | 帶球形襯的壓接管接頭.焊接轉接器 | Compression fittings with spherical liners; adaptars for welding |
| DIN 7638-1985 | 帶球形襯的壓接管接頭.等長度彎管 | Compression couplings with spherical liner; equal elbows |
| DIN 7639-1985 | 帶球形襯的壓接管接頭.等長度三通連接管 | Compression couplings with spherical liner; equal tees |
| DIN 7640-1985 | 帶球形襯的壓接管接頭.等長度四通連接管 | Compression couplings with spherical liner; equal crosses |
| DIN 7642-1997 | 管螺紋連接.釬焊連接環形管接頭 | Compression couplings - Ring type nipples for brazed connection |
| DIN 7644-1985 | 帶球形襯的壓接管接頭.環形套管的插樁式鼓形螺栓 | Compression couplings with spherical liner; male studed banjo bolts for ring type nipples |
| DIN 7647-1995 | 帶球形襯里的壓緊聯軸節.平行旋入式接頭 | Compression couplings with spherical liners - Adaptors with parallel screwed-in ends |
| DIN 8063-1-1986 | 未增塑聚氯乙烯壓力管道用管連接組件和接頭.承口彎頭尺寸 | Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends |
| DIN 8063-10-2002 | 加壓管道用未增塑聚氯乙烯的管道連接件和部件.第10部分:管壁支架彎管接頭.尺寸 | Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 10: Wall bracket elbows; Dimensions |
| DIN 8063-12-1987 | 未增塑聚氯乙烯壓力管道的管連接組件和接頭.帶法蘭的和承口接頭的尺寸 | Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings |
| DIN 8063-3-2002 | 加壓管道用未增塑聚氯乙烯的管道連接件和部件.第3部分:管接頭:尺寸 | Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 3: Unions; Dimensions |
| DIN 8063-4-1983 | 未增塑聚氯乙烯壓力管道用管連接組件和接頭.內外螺母、法蘭盤、密封件.尺寸 | Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions |
| DIN 8063-5-1999 | 未增塑聚氯乙烯壓力管道用管接頭和元件(PVC-U).第5部分:一般質量要求、試驗 | Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure - Part 5: General quality requirements, testing |
| DIN 8063-8-2002 | 加壓管道用未增塑聚氯乙烯的管道連接件和部件.第8部分:溶劑粘結用噴射模塑套管、帽和管接頭.尺寸 | Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 8: Injection-moulded sockets, caps and nipples for solvent cementing; Dimensions |
| DIN 808-1984 | 機床.萬向接頭.規格、連接尺寸、負載能力、安裝 | Machine tools; cardan joints; sizes, connecting dimensions, loading, installation |
| DIN 82004-1-2008 | 帶橢圓孔眼、雙耳和圓孔眼接頭配件的松緊螺絲扣.第1部分:非合金質量鋼 | Turnbuckles with oval eyes, double lugs and round eyes head fittings - Part 1: Non-alloy quality steel |
| DIN 82004-2-2008 | 帶橢圓形孔眼、雙耳和圓形孔眼接頭配件的松緊螺絲扣.第2部分:不銹鋼 | Turnbuckles with oval eyes, double lugs and round eyes head fittings - Part 2: Stainless steel |
| DIN 82006-1-2008 | 帶螺紋柄的橢圓形孔眼接頭配件.第1部分:旋轉接頭和松緊螺絲扣用非合金質量鋼 | Oval eye head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel |
| DIN 82006-2-2008 | 帶螺紋柄的橢圓形孔眼接頭配件.第2部分:松緊螺絲扣用不銹鋼 | Oval eye head fittings with threaded shank - Part 2: For turnbuckles, stainless steel |
| DIN 82008-1-2008 | 帶螺紋柄的雙耳接頭配件.第1部分:旋轉接頭和松緊螺絲扣用非合金質量鋼 | Double lug head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel |
| DIN 82008-2-2008 | 帶螺紋柄的雙耳接頭配件.第2部分:松緊螺絲扣用不銹鋼 | Double lug head fittings with threaded shank - Part 2: For turnbuckles, stainless steel |
| DIN 82010-1-2008 | 帶螺柄的螺柱孔眼配件.第1部分:旋轉接頭和松緊螺絲扣用非合金質量鋼 | Stud-eye head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel |
| DIN 82048-1990 | 跨距萬向接頭雙叉件 | Double yoke pieces for span trunnion |
| DIN 8526-1977 | 釬焊接頭檢驗.接縫釬焊接頭、剪切試驗、蠕變剪切試驗 | Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test |
| DIN 86041-2-1996 | 焊接法蘭.第2部分:舷外接頭.公稱壓力10、16、40 | Welding flanges - Part 2: Outboard connections, nominal pressure 10, 16, 40 |
| DIN 86103-1996 | 公制細螺紋和惠氏管螺紋管接頭用分岔接管 | Sockets for screwed ends with metric fine thread and Whitworth pipe thread |
| DIN 86126-2000 | 船舶用壓合接頭.公制螺紋24級接頭.類型和尺寸 | Compression fittings for shipboard use - 24° fittings with metric thread - Types and dimensions |
| DIN 86127-2000 | 艦船用壓縮式接頭.米制螺紋24級接頭.技術規范 | Compression fittings for shipboard use - 24 fittings with metric thread - Technical specification |
| DIN 86200-1989 | 滅火和甲板沖洗設備.軟管接頭.管件.軟管.附件.造船用各類管件產品概要 | Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding |
| DIN 86204-1993 | 船舶用黃銅制公稱壓力16的C型整體消防軟管接頭 | Solid fire hose coupling type C, PN 16; made of brass, for use on ships |
| DIN 86205-1993 | 船舶用黃銅制公稱壓力16的B型整體消防軟管接頭 | Solid fire hose coupling type B, PN 16; made of brass for use on ships |
| DIN 86211-1991 | 公稱壓力（PN）16、帶C或B型消防軟管管接頭和帶法蘭連接的滅火閥 | Fire valves for PN 16, with fire hose couplings type C or B and with flange connection |
| DIN 86284-1997 | 飲用水、滅火水、污水、油和含油混合劑的輸送和接受用管接頭類型.概要 | Types of joints for disposal and refuelling of drinking water, fire fighting water, sewage, oil and oily mixtures - Synopsis |
| DIN 86287-1999 | 船舶和海上建筑結構的管道.帶插接口和插套的鋼管和管接頭.鋪設和處理 | Pipework on ships and marine structures - Steel pipes and fittings with spigot and socket - Laying and treatment |
| DIN 87343-1976 | 手動帶傳動管的遙控傳動裝置.焊入接頭的叉形聯桿 | Remote control gear with transmission tubing for manual operation; fork links for welding-in connection |
| DIN 8906-1990 | 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭 | PN 40 flared flange solderless compression couplings for use in refrigerating systems |
| DIN 8912-1990 | 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭用的接頭螺母和螺紋堵塞 | Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems |
| DIN 8914-1990 | 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭用的90°錐體密封環和密封蓋 | 90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems |
| DIN 9798-1980 | 食品加工機械.灌香腸機.灌料管和灌料接頭 | Food equipment; sausage stuffers, filling horns and connections |
| DIN EN 10242-1995 | 可鍛鑄鐵螺紋管管接頭 | Threaded pipe fittings in malleable cast iron; German version EN 10242:1994 |
| DIN EN 10242/A1-1999 | 可鍛鑄鐵螺紋管管接頭.修正A1 | Threaded pipe fitting in malleable cast iron; Amendment A1; German version EN 10242:1994/A1:1999 |
| DIN EN 10311-2005 | 水和其他含水液體傳送用鋼管和配件的連接用接頭 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids; German version EN 10311:2005 |
| DIN EN 1075-2000 | 木質構件.試驗方法.金屬板沖壓緊固件連接接頭 | Timber structures - Test methods - Joints made with punched metal plate fasteners; German version EN 1075:1999 |
| DIN EN 12061-1999 | 塑料管道系統.熱塑管接頭.耐沖擊性能試驗方法 | Plastics piping systems - Thermoplastics fittings - Test method for impact resistance; German version EN 12061:1999 |
| DIN EN 12295-1999 | 塑料管道系統.熱水和冷水用熱塑性塑料管和相關管件.管接頭耐循環壓力的檢測方法 | Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999 |
| DIN EN 12512-2005 | 木結構.試驗方法.機械緊固件接頭的循環試驗 | Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners; English version of DIN EN 12512:2001 + A1:2005 |
| DIN EN 12517-1-2006 | 焊接連接的無損試驗.第1部分:通過X光透視評定鋼、鎳、鈦及其合金焊接接頭.允許極限 | Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels; English version of DIN EN 12517-1:2006-06 |
| DIN EN 12517-2-2008 | 接頭的無損檢驗.第2部分:通過射線照相術評估鋁及鋁合金的焊接接頭.驗收等級 | Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels; English version of DIN EN 12517-2:2008-12 |
| DIN EN 1254-4-1998 | 銅和銅合金.管配件.第4部分:把其它連接端頭和毛細管或壓力接頭相連接的管件 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998 |
| DIN EN 12560-1-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第1部分:有或無插件的非金屬平墊圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 12560-1:2001 |
| DIN EN 12560-2-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第2部分:鋼法蘭用繞制螺旋形密封墊 | Flanges and their joints - Gaskets for class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges; German version EN 12560-2:2001 |
| DIN EN 12560-3-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第3部分:非金屬PTFE包封墊圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 12560-3:2001 |
| DIN EN 12560-4-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第4部分:鋼法蘭用波紋形、平的或開槽的金屬和嵌條金屬墊圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; German version EN 12560-4:2001 |
| DIN EN 12560-5-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第5部分:鋼法蘭用金屬環接頭墊圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; German version EN 12560-5:2001 |
| DIN EN 12560-6-2004 | 法蘭及其接頭.分級標示法蘭用墊圈.第6部分:鋼法蘭用涂覆的有鋸齒金屬墊圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 12560-6:2003 |
| DIN EN 12560-7-2004 | 法蘭及其接頭.等級標示法蘭用墊圈.第7部分:與鋼法蘭一起使用的金屬涂覆有套墊圈 | Flanges and their joints - Gaskets for Class designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges; German version EN 12560-7:2004 |
| DIN EN 12797-2000 | 釬焊.釬焊接頭的破壞試驗 | Brazing - Destructive tests of brazed joints; German version EN 12797:2000 |
| DIN EN 12799-2000 | 釬焊.釬焊接頭的無損檢驗 | Brazing - Non-destructive examination of brazed joints; German version EN 12799:2000 |
| DIN EN 12814-1-1999 | 熱塑性塑料半成品焊接接頭的試驗.第1部分:彎曲試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999 |
| DIN EN 12814-2-2000 | 熱塑性塑料半成品的焊接接頭試驗.第2部分:拉伸試驗.德文版本EN 12814-2:2000 | Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2000 |
| DIN EN 12814-3-2005 | 熱塑性半成品的焊接接頭試驗.第3部分:拉伸蠕變試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (including amendment A1:2005); English version of DIN EN 12814-3:2000 + A1:2005 |
| DIN EN 12814-4-2001 | 熱塑性半成品焊接接頭試驗.第4部分:剝離試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2001 |
| DIN EN 12814-5-2000 | 熱塑性塑料半成品的焊接接頭試驗.第5部分:宏觀檢查 | Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000 |
| DIN EN 12814-6-2000 | 熱塑性塑料半成品的焊接接頭試驗.第6部分:低溫拉伸試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000 |
| DIN EN 12814-7-2003 | 熱塑半成品焊接接頭試驗.第7部分:腰形試驗樣品抗拉試驗 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002 |
| DIN EN 12814-8 Berichtigung 1-2004 | 熱塑性半成品焊接接頭的檢驗.第8部分:要求 | Testing of welded joints of thermoplastic semi-finished products - Part 8: Requirements; German version EN 12814-8:2001 |
| DIN EN 12814-8-2001 | 熱塑性半成品焊接接頭試驗.第8部分:要求 | Testing of welded joints of thermoplastic semi-finished products - Part 8: Requirements; German version EN 12814-8:2001 |
| DIN EN 1306-1996 | 內河航運船只.污水排放接頭 | Inland navigation vessels - Connections for the discharge of waste water; German version EN 1306:1996 |
| DIN EN 13090-2001 | 建筑物燃?xì)夤艿缆菁y接頭再密封方法 | Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000 |
| DIN EN 13100-1-2000 | 熱塑性塑料半成品焊接接頭的無損檢驗.第1部分:外觀檢驗 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:1999 |
| DIN EN 13100-2-2005 | 熱塑性半成品焊接接頭的無損檢驗.第2部分:X射線照相檢驗 | Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German version EN 13100-2:2004 |
| DIN EN 13100-3-2005 | 熱塑性半成品焊接接頭的無損檢驗.第3部分:超聲檢驗 | Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing; German version EN 13100-3:2004 |
| DIN EN 14325-2004 | 化學防護服.化學防護服材料、接縫、接頭及總體的試驗方法和性能分類 | Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages; German version EN 14325:2004 |
| DIN EN 1435-2002 | 焊縫的無損檢驗.焊接接頭的X光照相檢驗; 德文版本 EN 1435:1997 + A1:2002 | Non-destructive testing of welds - Radiographic testing of welded joints; German version EN 1435:1997 + A1:2002 |
| DIN EN 14420-4-2007 | 帶夾具的軟管配件.第4部分:法蘭接頭 | Hose fittings with clamp units - Part 4: Flange connections; English version of DIN EN 14420-4:2007-04 |
| DIN EN 14420-6-2007 | 帶夾具的軟管配件.第6部分:TW油罐車接頭 | Hose fittings with clamp units - Part 6: TW tank truck couplings (includes Amendment A1:2007); English version of DIN EN 14420-6:2004+A1:2007-04 |
| DIN EN 14420-7-2007 | 帶夾件的軟管配件.第7部分:凸輪鎖緊接頭 | Hose fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007); English version of DIN EN 14420-7:2007-04 |
| DIN EN 14420-8-2007 | 帶夾具的軟管配件.第8部分:對稱半節管接頭(吉爾曼系統) | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) (includes Amendment A1:2007); English version of DIN EN 14420-8:2007-04 |
| DIN EN 14454-2005 | 防飲用水回流污染的裝置.軟管接頭防回流裝置DN 15至DN 32. A型H系列 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A; German version EN 14454:2005 |
| DIN EN 1451-1-1999 | 建筑物結構體中的廢水和污物排放系統用塑料管道系統(低溫和高溫).聚丙烯(PP).第1部分:管、管接頭和管道系統 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998 |
| DIN EN 14525-2005 | 不同材料(球墨鑄鐵、灰鑄鐵、鋼、PVC-U、PE和纖維水泥)管道用球墨鑄鐵大公差聯接器和法蘭接頭 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004 |
| DIN EN 14741-2006 | 熱塑管和管道系統.地下非壓力設施用接頭.通過評估密封壓力測定彈性密封件接頭的長期密封性能的試驗方法 | Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure English version of DIN EN 14741:2006-05 |
| DIN EN 15096-2008 | 飲用水防回流污染的裝置.水龍帶接頭反真空閥.DN15～DN25包括家用H、B和D型.通用技術規范 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification; English version of DIN EN 15096:2008-04 |
| DIN EN 1591-1 Bb.1-2001 | 法蘭及其接頭.密封圈法蘭接頭設計規則.背景信息 | Flanges and their joints - Design rules for gasketed circular flange connections - Background information |
| DIN EN 1591-2-2008 | 法蘭及其接頭.帶襯墊的圓形法蘭接頭設計規則.第2部分:襯墊參數 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters; English version of DIN EN 1591-2:2008-09 |
| DIN EN 1712-2002 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收標準; 德文版本 EN 1712:1997 + A1:2002 | Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels; German version EN 1712:1997 + A1:2002 |
| DIN EN 1714-2002 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗; 德文版本 EN 1714:1997 + A1:2002 | Non-destructive testing of welds - Ultrasonic testing of welded joints; German version EN 1714:1997 + A1:2002 |
| DIN EN 175301-803-2007 | 詳細規范:不可分的0.8mm 厚自鎖螺紋的扁接頭矩形連接器 | Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable; German version EN 175301-803:2006 |
| DIN EN 1759-3-2004 | 法蘭及其接頭.等級標示的管、閥、配件和附件用圓形法蘭.第3部分:銅合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004 |
| DIN EN 1759-4-2003 | 法蘭及其接頭.指定類別的管、閥、配件和附件用圓形法蘭.第4部分:鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003 |
| DIN EN 1993-1-8-2005 | 歐洲法規3:鋼結構的設計.第1-8部分:接頭的設計 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German Version EN 1993-1-8;2005 |
| DIN EN 205-2003 | 膠粘劑.非結構上用木材膠粘劑.搭接接頭的抗拉伸剪切強度的測定 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2003 |
| DIN EN 2290-1-1998 | 航空航天系列.可調節控制桿端部接頭的鋁合金飛行控制桿體.第1部分:尺寸和負載 | Aerospace series - Rod bodies flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads; German version EN 2290-1:1998 |
| DIN EN 2569-1992 | 航空航天系列.操縱鋼纜接頭和松緊螺絲扣.技術規范 | Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991 |
| DIN EN 2591-512-2003 | 航空航天系列.光電連接元件.試驗方法.第512部分:密封連接器外殼固定接頭有效性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002 |
| DIN EN 274-1-2002 | 潔具下水管接頭.第1部分:要求 | Waste fittings for sanitary appliances - Part 1: Requirements; German version EN 274-1:2002 |
| DIN EN 274-2-2002 | 潔具下水管接頭.第2部分:試驗方法 | Waste fittings for sanitary appliances - Part 2: Test methods; German version EN 274-2:2002 |
| DIN EN 274-3-2002 | 潔具下水管接頭.第3部分:質量控制 | Waste fittings for sanitary appliances - Part 3: Quality control; German version EN 274-3:2002 |
| DIN EN 295-4-1995 | 排水和污水用陶土管和配件及管接頭.第4部分:專用配件、轉換接頭和相容附件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adapters and compatible accessories; German version EN 295-4:1995 |
| DIN EN 295-7-1995 | 陶土污水管.配件及管連接件.第7部分:陶土管和管接頭前移要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking; German version EN 295-7:1995 |
| DIN EN 301006-1-2000 | 模擬和綜合業務數字網(ISDN)用戶線路的電路試驗用局域交換Q3接口.第1部分:Q3接頭規范 | Q3 interface at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) subscriber lines - Part 1: Q3 interface specification (Endorsement of the English version EN 301006-1 V 1.2.3 (1998-10) as German Standard) |
| DIN EN 3080-2007 | 航空航天系列.鈦合金8°30'管接頭.帶有推力線螺母的縮短三通 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006 |
| DIN EN 3082-2004 | 航空航天系列.鈦合金管連接件8°30'.修理用悶頭焊接活接頭 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead welded end, for repair; German and English version EN 3082:2001 + AC:2003 |
| DIN EN 3083-2004 | 航空航天系列.鈦合金管連接件8°30'.修理用悶頭長焊接端頭活接頭 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long welded end, for repair; German and English version EN 3083:2001 + AC:2003 |
| DIN EN 3084-2004 | 航空航天系列.鈦合金管連接件8°30'.修理用焊接端頭螺紋活接頭 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded end threaded for repair; German and English version EN 3084:2001 + AC:2003 |
| DIN EN 3244-2002 | 航空航天系列.鈦合金8°30'管連接件.雙端管接頭 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, double ended; German version EN 3244:2001 |
| DIN EN 3245-2002 | 航空航天系列.鈦合金8°30'管連接件.異徑管接頭; 德文版本 EN 3245:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, reducer; German version EN 3245:2001 |
| DIN EN 3246-2002 | 航空航天系列.鈦合金8°30'管連接件.悶頭管接頭; 德文版本 EN 3246:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead; German version EN 3246:2001 |
| DIN EN 3247-2002 | 航空航天系列.鈦合金8°30'管連接件.焊接端的悶頭管接頭; 德文版本 EN 3247:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, welded end; German version EN 3247:2001 |
| DIN EN 3269-2006 | 航空航天系列.8°30'鈦合金管接頭.帶動態梁密封端的單頭卡套.德文和英文版本EN 3269-2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001 |
| DIN EN 3272-2006 | 航空航天系列.8°30'管接頭.焊接箍用動態梁密封端.幾何構型.德文和英文版本EN 3272-2001 | Aerospace series - Pipe coupling 8°30' - Dynamic beam seal end for ferrule, welded - Geometric configuration; German and English version EN 3272:2001 |
| DIN EN 3373-001-2008 | 航空航天系列.導電體壓接端頭和內嵌式接頭.第001部分:技術規范 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 001: Technical specification; German and English version EN 3373-001:2007 |
| DIN EN 3566-2004 | 航空航天系列.鈦合金管連接件8°30'.帶鎖緊環的接頭 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Adaptors with lockring; German and English version EN 3566:2001 + AC:2003 |
| DIN EN 3690-2004 | 航空航天系列.鈦合金管連接件8°30'.長悶頭活接頭 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long; German and English version EN 3690:2001 + AC:2003 |
| DIN EN 3691-2004 | 航空航天系列.鈦合金管連接件8°30'.焊接端長悶頭活接頭 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long, welded end; German and English version EN 3691:2001 + AC:2003 |
| DIN EN 3851-2004 | 航空航天系列.鈦合金TI-P64001的60球面管子接頭.直轉動螺套 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nut, straight; German and English version EN 3851:2003 |
| DIN EN 3852-2004 | 航空航天系列.鈦合金TI-P64001的60球面管子接頭.有螺紋的焊接直活管節 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded; German and English version EN 3852:2002 |
| DIN EN 3853-2004 | 航空航天系列.鈦合金TI-P64001的60球面管子接頭.有螺紋直活管節 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, threaded; German and English version EN 3853:2002 |
| DIN EN 3854-2004 | 航空航天系列.鈦合金TI-P64001的60球面管子接頭.焊接套圈 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Ferrules, welded; German and English version EN 3854:2002 |
| DIN EN 3855-2004 | 航空航天系列.鈦合金TI-P64001的60球面管子接頭.帽 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Caps; German and English version EN 3855:2002 |
| DIN EN 3856-2004 | 航空航天系列.鈦合金TI-P64001的60球面管子接頭.推力線用轉動螺套 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire; German and English version EN 3856:2002 |
| DIN EN 3857-2004 | 航空航天系列.鈦合金TI-P64001的60球面管子接頭.90焊接彎頭 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Elbows 90°, welded; German and English version EN 3857:2002 |
| DIN EN 387-2002 | 膠合板.大尺寸指形接頭.性能要求和最低生產要求 | Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements; German version EN 387:2001 |
| DIN EN 4020-2006 | 航空航天系列. 8°30'鈦合金管接頭.帶推進線螺母的90°彎頭焊接端 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end with thrust wire nut; German and English version EN 4020:2001 |
| DIN EN 4025-2006 | 航空航天系列. 8°30'鈦合金管接頭.45°凸檐彎頭 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 45°, bulkhead; German and English version EN 4025:2001 |
| DIN EN 4028-2008 | 航空航天系列.鈦合金中8°30′管接頭.運轉中帶止推金屬絲螺母的三通管 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees with thrust wire nut on run; German and English version EN 4028:2001 |
| DIN EN 4051-2003 | 航空航天系列.鈦合金TI-P64001、球形、60度管連接器.油口接頭 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Port connection; German and English version EN 4051:2002 |
| DIN EN 4186-2002 | 航空航天系列.鈦合金管連接件 8°30'.十字形管接頭; 德文版本 EN 4186:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, cross; German version EN 4186:2001 |
| DIN EN 4187-2006 | 航空航天系列.8°30'鈦合金管接頭.90°悶頭長彎管 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 90° bulkhead, long; German and English version EN 4187:2001 |
| DIN EN 4233-2002 | 航空航天系列.鈦合金管連接件 8°30'.帶螺紋的焊接管接頭; 德文版本 EN 4233:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded, threaded; German version EN 4233:2001 |
| DIN EN 4550-3-2004 | 航空航天系列.管道連接件37設計構造.英制.第3部分:端口接頭 | Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 3: Port connections; German and English version EN 4550-3:2003 |
| DIN EN 4552-2004 | 航空航天系列.耐熱鋼制37球面管子接頭.焊接端直螺紋接頭.英制系列 | Aerospace series - Pipe coupling, 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series; German and English version EN 4552:2003 |
| DIN EN 4553-2004 | 航空航天系列.耐熱鋼制37球面管子接頭.焊接端90彎管螺紋接頭.英制系列 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Elbow 90° nipples, welded end - Inch series; German and English version EN 4553:2003 |
| DIN EN 4554-2004 | 航空航天系列.耐熱鋼制37球面管子接頭.加螺紋直活管節.英制系列 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight unions, threaded - Inch series; German and English version EN 4554:2003 |
| DIN EN 4555-2004 | 航空航天系列.耐熱鋼制37球面管子接頭.焊接端套圈.英制系列 | Aerospace series - Pipe coupling 37°, in heat resisting steel - Ferrules, welded end - Inch series; German and English version EN 4555:2003 |
| DIN EN 4556-2004 | 航空航天系列.耐熱鋼制37球面管子接頭.帽組件.英制系列 | Aerospace series - Pipe coupling 37°, in heat resisting steel - Cap assemblies - Inch series; German and English version EN 4556:2003 |
| DIN EN 4557-2004 | 航空航天系列.耐熱鋼制37球面管子接頭.焊接端T形螺紋接頭.英制系列 | Aerospace series - Pipe couplings, 37°, spherical, in heat resisting steel - Tees nipples, welded end - Inch series; German and English version EN 4557:2003 |
| DIN EN 4561-2004 | 航空航天系列.耐熱鋼制焊接管子接頭.90彎管.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90° - Inch series; German and English version EN 4561:2003 |
| DIN EN 4562-2004 | 航空航天系列.耐熱鋼制焊接管子接頭.異徑管.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series; German and English version EN 4562:2003 |
| DIN EN 4563-2004 | 航空航天系列.耐熱鋼制焊接管子接頭.三通.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series; German and English version EN 4563:2003 |
| DIN EN 50377-2-1-2002 | 光纖通信系統接頭組件和互連元件.產品規范.第2-1部分:端接在IEC 60793-2 B1類單模纖維上的FC-PC型接頭組件 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1: Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre; German version EN 50377-2-1:2001 |
| DIN EN 512/A1-2002 | 纖維水泥制品.壓力管道和接頭.修改件A1:2001; 德文版本 EN 512:1994/A1:2001 | Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 |
| DIN EN 545-2007 | 水管用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; English version of DIN EN 545:2007-02 |
| DIN EN 60512-16-13-2009 | 電子設備用連接器.試驗和測量.第16-13部分:觸點和終端的機械試驗.試驗16m:無釬焊纏繞接頭的退繞能力 | Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections (IEC 60512-16-13:2008); German version EN 60512-16-13:2008 |
| DIN EN 61466-1-1997 | 額定電壓超過1KV的架空線用復合絕緣子串組合件.第1部分:標準強度等級和端接頭 | Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 1: Standard strength classes and end fittings (IEC 61466-1:1997); German version EN 61466-1:1997 |
| DIN EN 639-1994 | 包括管接頭和配件的混凝土承壓管通用要求 | Common requirements for concrete pressure pipes, including joints and fittings; German version EN 639:1994 |
| DIN EN 712-1994 | 熱塑塑料管道系統.壓力管和管接頭之間承載端部的機械連接.恒定縱向作用力下抗拉出力的試驗方法 | Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993 |
| DIN EN 713-1994 | 塑料管道系統.管接頭和聚烯烴壓力管間的機械連接.在內壓和彎曲下密封性的試驗方法 | Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993 |
| DIN EN 715-1994 | 熱塑塑料管道系統.小直徑壓力管和管接頭之間承載端部的連接.在水內壓力下（包括端頭推力）密封試驗方法 | Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994 |
| DIN EN 728-1997 | 塑料管和管道系統.聚烯烴管和接頭.氧化感應時間測定 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997 |
| DIN EN 876-1995 | 金屬材料焊接的破壞試驗.有熔焊接頭的焊接金屬的縱向拉伸試驗 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints; German version EN 876:1995 |
| DIN EN 911-1995 | 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭的連接.外部靜力液壓條件下的防漏試驗方法; | Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995 |
| DIN EN ISO 10042-2006 | 焊接.鋁和鋁合金的弧焊接頭.缺陷質量分級 (ISO 10042-2005).德文版本 EN ISO 10042-2005 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005); English version of DIN EN ISO 10042:2006-02 |
| DIN EN ISO 10321-2008 | 土工布.用寬條法對接頭/接縫處的拉伸試驗 | Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008 |
| DIN EN ISO 10692-1-2003 | 儲氣瓶.微電子工業用儲氣瓶閥接頭.第1部分:輸出口接頭 | Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 1: Outlet connections (ISO 10692-1:2001); German version EN ISO 10692-1:2001 |
| DIN EN ISO 10692-2-2003 | 儲氣瓶.微電子工業用儲氣瓶閥接頭.第2部分:儲氣瓶閥接頭規范和型式試驗 | Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001 |
| DIN EN ISO 11144-1996 | 牙科設備.給排水管接頭 | Dental equipment - Connections for supply and waste lines (ISO 11144:1995); German version EN ISO 11144:1996 |
| DIN EN ISO 1167-1-2006 | 流體傳輸用熱塑管、接頭和組件.抗內壓力的測定.第1部分:通用方法 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); English version of DIN EN ISO 1167-1:2006-05 |
| DIN EN ISO 1167-2-2006 | 流體傳輸用熱塑管、接頭和組件.抗內壓力的測定.第2部分:管試件的準備 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); English version of DIN EN ISO 1167-2:2006-05 |
| DIN EN ISO 13919-1-1996 | 焊接.電子和激光束焊接接頭.質量缺陷等級指南.第1部分:鋼 | Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996 |
| DIN EN ISO 13919-2-2001 | 焊接.電子和激光束焊接接頭.質量缺陷等級導則.第1部分:鋁及可焊鋁合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001 |
| DIN EN ISO 14324-2003 | 電阻點焊.焊接的有損檢驗.點焊接頭的疲勞試驗方法 | Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003); German version EN ISO 14324:2003 |
| DIN EN ISO 15236-4-2004 | 襯鋼絲繩芯傳送帶.第4部分:硬化帶接頭 | Steel cord conveyor belts - Part 4: Vulcanized belt joints (ISO 15236-4:2004); German Version EN ISO 15236-4:2004 |
| DIN EN ISO 16070-2006 | 石油和天然氣工業.下井設備.鎖芯軸和落地接頭 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005); English version EN ISO 16070:2005 |
| DIN EN ISO 17659-2005 | 焊接.圖示焊接接頭的多語種術語 | Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002); Trilingual version EN ISO 17659:2004 |
| DIN EN ISO 17660-1 Berichtigung 1-2007 | 焊接.鋼筋焊接.第1部分:承載焊接接頭(ISO 17660-1-2006) | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006); German version EN ISO 17660-1:2006, Corrigenda to DIN EN ISO 17660-1:2006-12 |
| DIN EN ISO 17660-2 Berichtigung 1-2007 | 焊接.鋼筋焊接.第2部分:非承載焊接接頭(ISO 17660-2-2006) | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006); German version EN ISO 17660-2:2006, Corrigenda to DIN EN ISO 17660-2:2006-12 |
| DIN EN ISO 18279-2004 | 銅焊.銅焊接頭的缺陷 | Brazing - Imperfections in brazed joints (ISO 18279:2003); German version EN ISO 18279:2003 |
| DIN EN ISO 5183-1-2000 | 電阻焊接設備.外錐度1:10電極接頭.第1部分:錐度1:10圓錐形接頭 | Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998); German version EN ISO 5183-1:2000 |
| DIN EN ISO 5183-2-2002 | 電阻點焊.外錐度1:10電極接頭.第2部分:軸端推力電極用平行柄接頭(ISO 5183-2:2000); 德文版本 EN ISO 5183- | Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002 |
| DIN EN ISO 5356-1-2004 | 麻醉和呼吸設備.圓錐形接頭.第1部分:錐體和錐套 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004); German version EN ISO 5356-1:2004 |
| DIN EN ISO 5817 Berichtigung 1-2007 | 焊接.鋼、鎳、鈦及其合金的熔焊接頭(束焊除外).缺陷的質量等級.技術勘誤DIN EN ISO 5817-2006 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003 + Cor. 1:2006); German version EN ISO 5817:2003 + AC:2006, Corrigenda to DIN EN ISO 5817:2006-10 |
| DIN EN ISO 5817-2006 | 焊接.鋼、鎳、鈦及其合金的熔焊接頭(束焊除外).缺陷的質量等級(ISO 5817-2003 + Cor.1-2006) | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003 + Cor. 1:2006); German version EN ISO 5817:2007 |
| DIN EN ISO 6149-1-2007 | 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第1部分:锪孔溝槽中裝 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006)English version of DIN EN ISO 6149-1:2007-05 |
| DIN EN ISO 6149-2-2007 | 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第2部分:重型(S系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)English version of DIN EN ISO 6149-2:2007-05 |
| DIN EN ISO 6149-3-2007 | 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第3部分:輕型(L系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)English version of DIN EN ISO 6149-3:2007-05 |
| DIN EN ISO 8092-3-1999 | 道路車輛.車載電氣線束的連接.第3部分:多極連接接頭,尺寸和特殊要求 | Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999 |
| DIN EN ISO 8434-1-2008 | 液壓傳動和通用金屬管連接件.第1部分:24°錐形接頭 | Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007 |
| DIN EN ISO 8795-2001 | 人類生活用水的塑料輸水管道系統.偏移評定.塑料管、配件及其接頭偏移值測定 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001 |
| DIN EN ISO 9093-1-1998 | 小型船舶.船底閥和船體外殼管接頭.第1部分:金屬件 | Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997 |
| DIN EN ISO 9142-2004 | 膠粘劑.粘接接頭測試用標準試驗室老化條件的選擇指南 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003 |
| DIN EN ISO 9692-2-1999 | 焊接和相關工藝.接頭的預處理.第2部分:鋼的埋弧焊（ISO 9692-2-1998,包括技術勘誤AC-1999) | Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998, includes Corrigendum AC:1999); German version EN ISO 9692-2:1998 + AC:1999 |
| DIN EN ISO 9692-4-2003 | 焊接和相關工藝.接頭準備的推薦標準.第4部分:復合鋼 | Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003); German version EN ISO 9692-4:2003 |
| DIN ISO 10583-1998 | 航空航天流體系統.管/管接頭組件的試驗方法 | Aerospace fluid systems - Test methods for tube/fitting assemblies (ISO 10583:1993) |
| DIN ISO 12151-2-2004 | 液壓傳動和通用連接件.軟管接頭.第2部分:帶ISO 8434-1和8434-4 24°錐形連接件末端和O形圈的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003) |
| DIN ISO 12151-3-2004 | 液壓傳動和通用連接件.軟管接頭.第3部分:帶ISO 6162法蘭末端的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999) |
| DIN ISO 15171-1-2004 | 流體傳動和一般用途管接頭.診斷用液壓管接頭.第1部分:非壓力下連接的管接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
| DIN ISO 15171-2-2004 | 流體傳動和一般用途管接頭.診斷用液壓管接頭.第2部分:帶M12 2螺紋端的壓力連接接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000) |
| DIN ISO 15407-1-2003 | 氣壓傳動.五氣口方向控制閥、規格18mm和26mm.第1部分:無電氣接頭的安裝面 | Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000) |
| DIN ISO 16030-2007 | 氣壓傳動.接頭.端口和柱頭螺栓端頭.(ISO 16030-2001+修改件1-2005) | Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005)English version of DIN ISO 16030-2007-05 |
| DIN ISO 22826-2008 | 金屬材料焊縫的破壞性試驗.使用激光和電子束焊接的窄接頭硬度試驗(維氏和努氏硬度試驗) | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
| DIN ISO 5599-1-2005 | 氣壓傳動.五氣口方向控制閥.第1部分:不帶電接頭的安裝面 | Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector (ISO 5599-1:2001);English version of DIN ISO 5599-1:2005 |
| DIN ISO 5620-1-1994 | 造船和船舶結構.飲用水箱注水接頭.第1部分:一般要求; 等同采用 ISO 5620-1:1992 | Shipbuilding and marine structures; filling connection for drinking water tanks; general requirements; identical with ISO 5620-1:1992 |
| DIN ISO 5620-2-1994 | 造船和船舶結構.飲用水箱注水接頭.第2部分:部件; 等同采用 ISO 5620-2:1992 | Shipbuilding and marine structures; filling connection for drinking water tanks; components; identical with ISO 5620-2:1992 |
| DIN ISO 7803-1995 | 商用公路車輛.轉向球形接頭; 等同采用 ISO 7803:1987 | Commercial road vehicles - Steering ball joints; identical with ISO 7803:1987 |
| DIN VDE 0710-11-1968 | 工作電壓低于1kV的照明配件規范.第11部分:嵌入式信號燈接頭規范規則 | Specifications for lighting fittings with service voltages below 1000 V; Specification rules for flush-fitting signal-light fittings |
| 編號 | 中文名稱 | 英文名稱 |