| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A48-720-1999 | 建筑物排水用鑄鐵管和配件及其接頭和附件.要求、試驗方法和質量保證 | (Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.) |
| NF A48-801-2002 | 水管用球墨鑄鐵管、配件和附件及其接頭.要求和試驗方法 | (Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods.) |
| NF A48-810-1995 | 燃?xì)夤艿烙们蚰T鐵管、配件、附件及其接頭.要求和試驗方法 | (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.) |
| NF A48-810/A1-1999 | 燃?xì)夤艿烙们蚰T鐵管、配件、附件及其接頭.要求和試驗方法 | (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.) |
| NF A48-820-1994 | 污水排放用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法 | (Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.) |
| NF A48-830-1983 | 鑄制產品.有壓力的飲用水聚氯乙烯管道用球墨鑄鐵接頭 | (Foundry products. Spheroidal graphite cast iron sittings for PVC drinking water pipes under pressure.) |
| NF A48-860-1981 | 鑄造產品.承壓管道用可鍛鑄鐵管道部件.承插系列.GS快速接頭.連接尺寸和連接附件 | (Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.) |
| NF A48-870-1981 | 鑄造產品.承接管道用可鍛鑄鐵管道部件.承插系列.GS標準接頭.連接尺寸和連接附件 | (Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.) |
| NF A49-150-2003 | 包括人類生活用水在內的水成液的傳送用非合金鋼管和管接頭.技術交貨條件 | (Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
| NF A49-191-1975 | 鋼管.毛細管焊接或焊接釬接用鋼或鑄鐵接頭.（尺寸.交貨技術條件.） | (STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-716-1998 | 鋼管.焊接接頭鍍膜配件和管的外結構. | (STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING FOR WELDED JOINT.) |
| NF A72-120-1973 | 鋼鐵廠.氣體管道和大直徑閥.帶法蘭的接頭（PN6） | (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.) |
| NF A80-022-1999 | 焊接.帶說明的多語種接頭術語 | (WELDING. MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS. (EUROPEAN STANDARD EN 12345).) |
| NF A82-104-1-2000 | 電阻焊接設備.電極接頭,外錐度1:10.第1部分:圓錐形接頭,錐度1:10 | (Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.) |
| NF A82-104-2-2001 | 電阻點焊.外錐度1:10電極接頭.第2部分:端推力電極用平行柄接頭 | (Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2 : parallel shank fixing for end-thrust electrodes.) |
| NF A82-104-3-1992 | 電阻點焊.電極帽的活動接頭 | (Resistance spot welding electrode caps.) |
| NF A84-420-1991 | 氣焊設備和有關方法.減壓閥入品接頭.尺寸 | (Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.) |
| NF A84-444-2003 | 氣焊設備.焊接、切割和相關工藝用乙炔復式接頭系統.高壓裝置的安全要求 | (Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices.) |
| NF A87-011-1994 | 帶有電焊條的金屬電弧熔焊、氣體保護金屬弧焊及氣焊.鋼接頭的制備 | (Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel.) |
| NF A87-013-2-1999 | 焊接和相關工藝.接頭的預處理.第2部分:鋼的埋弧焊 | (WELDING AND ALLIED PROCESSES. JOINT PREPARATION. PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN STANDARD EN ISO 9692-2).) |
| NF A87-013-3-2001 | 焊接和相關工藝.接頭預處理的推薦方法.第3部分:鋁和鋁合金的金屬焊條惰性氣體保護焊和鎢極惰性氣體保護焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A89-057-8-2002 | 金屬材料焊接程序規范和鑒定.焊接程序試驗.第8部分:管對管-板接頭的焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.) |
| NF A89-208-1987 | 焊接和有關技術.點焊,凸焊或縫焊搭接接頭 | (WELDING AND ALLIED TECHNIQUES. SPOT,PROJECTION OR SEAM WELDED LAP JOINTS.) |
| NF A89-231-1992 | 鋼的弧焊接頭.質量缺陷等級導則 | (ARC-WELDED JOINTS IN STEEL. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 25817).) |
| NF A89-232-1994 | 鋁和可焊合金的弧焊接頭.質量缺陷等級導則 | (ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).) |
| NF A89-233-1996 | 焊接.電子束和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋼 | (WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).) |
| NF A89-234-2001 | 焊接.電子和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋁及其可焊合金 | (Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.) |
| NF A89-240-1987 | 焊接和有關技術.電阻點焊、凸焊或縫焊搭接接頭.帶解釋的缺陷分類 | (WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.) |
| NF A89-430-2000 | 釬焊.釬焊接頭的無損檢驗 | (Brazing - Non-destructive examination of brazed joints.) |
| NF A89-510-1997 | 焊縫的無損檢驗.焊接接頭的X射線照相檢驗 | (Non-destructive examination of welds. Radiographic examination of welded joints.) |
| NF A89-510/A1-2003 | 焊接無損檢驗.焊接接頭射線照相檢驗 | (Non-destructive examination of welds - Radiographic examination of welded joints.) |
| NF A89-511-1998 | 焊縫的無損檢驗.焊接接頭的X射線照相檢驗.驗收等級 | (Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels.) |
| NF A89-511/A1-2003 | 焊縫的無損檢驗.焊接接頭的X射線照相檢驗.驗收水平 | (Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels.) |
| NF A89-520-1997 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗 | (Non destructive examination of welds. Ultrasonic examination of welded joints.) |
| NF A89-520/A1-2002 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗 | (Non-destructive testing of welds - Ultrasonic testing of welded joints.) |
| NF A89-521-1997 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收等級 | (Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.) |
| NF A89-521/A1-2002 | 焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收等級 | (Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels.) |
| NF A89-810-1-1999 | 熱塑性半成品的焊接接頭試驗.第1部分:彎曲試驗. | (Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.) |
| NF A89-810-3-2000 | 熱塑性半成品的焊接接頭試驗.第3部分:拉伸蠕變?cè)囼?yàn). | (Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.) |
| NF A89-810-4-2002 | 熱塑性半成品的焊接接頭試驗.第4部分:剝離試驗 | (Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.) |
| NF A89-810-5-2000 | 熱塑半成品焊接接頭的試驗.第5部分:宏觀檢驗 | (Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.) |
| NF A89-810-7-2003 | 熱塑性半成品焊接接頭的試驗.第7部分:腰形試驗樣品的抗拉試驗 | (Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.) |
| NF A89-810-8-2002 | 熱塑性半成品的焊接接頭試驗.第8部分:要求 | (Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.) |
| NF B34-001-1976 | 玻璃制儀器、管路及接頭.硼硅3.3玻璃的特性 | (Glass plant, pipeline and fittings. Properties of borosilicate glass 3.3.) |
| NF B34-002-1976 | 玻璃制儀器、管路及接頭.試驗、操作和使用的一般規則 | (Glass plant, pipeline and fittings. General rules for testing, handling and use.) |
| NF B34-003-1999 | 玻璃制儀器、管路及接頭.標稱內徑15-1000mm管與管接頭.兼容性與互換性 | (Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to DN 1000. Compatibility and interchangeability.) |
| NF B35-008-1974 | 實驗室用玻璃器皿.錐形瓶和帶有磨光接頭的有頸錐形瓶 | (LABORATORY GLASSWARE. CONICAL FLASKS. CONICAL FLASKS WITH CONICAL GROUND GLASS JOINT.) |
| NF B35-012-1972 | 實驗室用玻璃器皿.帶互換磨光元件的球形接頭 | (INTERCHANGEABLE SPHERICAL GROUND JOINTS.) |
| NF B35-013-1983 | 實驗室用玻璃器皿.帶互換磨光錐形接頭 | (Laboratory glassware. Interchangeable conical ground joints.) |
| NF B35-022-1977 | 實驗室用玻璃器皿.蒸餾器配件.適配器.轉接器.接頭 | (LABORATORY GLASSWARE. COMPONENTS OF DISTILLATION EQUIPEMENT. ADAPTATORS-EXTENSIONS-UNIONS.) |
| NF C20-131-1974 | 鋁導線用帶導電鍍層的有鋁片或銅片的接頭.規則和尺寸 | (LUGS WITH COPPER OR ALUMINIUM FLATS AND WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.) |
| NF C46-512-1999 | 工業處理控制閥.第3-3部分:尺寸.對焊接的頭尾相接尺寸.兩接頭球型直接式控制閥(歐洲標準EN 60534-3-3) | (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.) |
| NF C52-152-1969 | 變壓器.帶凸緣的滑輪支架叉形接頭和鎖定裝置 | (TRANSFORMERS. DIMENSIONS OF TRAVELLING WHEELS AND ASSOCIATED LOCKING DEVICES.) |
| NF C52-152M1-1970 | 變壓器.帶凸緣的滑輪支架叉形接頭和鎖定裝置 | (TRANSFORMERS DIMENSIONS OF TRAVELLING WHEELS AND ASSOCIATED LOCKING DEVICES.) |
| NF C64-021-1991 | 交流電用高壓設備.管線用的接頭 | (CONNECTORS FOR TUBES.) |
| NF C66-495-1988 | 架空線路用絕緣子和器材.絕緣子鏈元件的球狀頭和球槽接頭.特性尺寸 | (Insulators and fittings for overhead lines. Dimensions of ball and socket couplings of string insulator units.) |
| NF C66-496-1988 | 架空線路用絕緣子和器材.架空線路絕緣體和器材.絕緣子鏈元件的球狀接頭和球槽頭鎖定裝置.第1部分：尺寸和一 | (Isolators and fittings for overhead lines. Locking devices for ball and socket couplings of string insulator units.) |
| NF C66-800-1978 | 架空線路用絕緣子和器材.架空線路連接件.接頭，分接頭和端點連接件 | (INSULATORS AND FITTINGS FOR OVERHEAD LINES. CONNECTION JOINTS FOR OVERHEAD LINES. JUNCTION JOINTS,TEE JOINTS,AND END-JOINTS.) |
| NF C74-347-1993 | 低型接頭式可植入心臟起搏器(EN 50077) | (Low-profile connector implantable cardiac pacemakers.) |
| NF C93-421-1983 | 電子元件.連接元件.ＨＥ７型節距為２·５４mm單面印制電路板用插入式多觸點接頭 | (Electronic components. Connecting devices. Multicontact edge socket and board mounted connectors for single clad printed boards with 2,54 mm spacing. Type he 7. General requirements.) |
| NF C93-422-1977 | 電子元件.連接元件.多觸點圓柱狀接頭.一般規定 | (Electronic components. Connecting devices. Circular multipole connectors.) |
| NF C93-423-1982 | 電子元件.連接元件.ＨＥ９型節距為２·５４mm雙面印刷電路板用插入式多觸點接頭.特殊規范匯編 | (Electronic components. Connecting devices. Multicontact edge socket and board mounted connectors for double clad printed boards with 2,54 mm spacing. Type HE 9. General requirements.) |
| NF C93-424-1982 | 電子元件.連接元件.Ａ型插入式印刷電路板多觸點接頭及其相應的ＨＥ８型節距為１·２７mm的插座.一般規定 | (Electronic components. Connecting devices. Board mounted printed circuits connectors with contact and termination spacing of 1,27 mm. Type HE 8. General requirements.) |
| NF C93-425-1981 | 電子元件.連接元件.帶外殼的支架和板條的多觸點接頭.一般要求 | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. MULTIPOLE CONNECTORS WITH SHELL FOR RACKS AND PANELS. GENERAL REQUIREMENTS.) |
| NF C93-426-1977 | 連接元件.模制件的矩形多觸點接頭.一般規定 | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. MULTIPOLE RECTANGULAR CONNECTORS WITHOUT SHELL. GENERAL REQUIREMENTS.) |
| NF C93-428-1981 | 電子元件. 連接元件.與紗包電纜自動剝離間距為１·２７mm的Ａ型多觸點插入式接頭及其垂直距離為２·５４mm | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. INSULATION DISPLACEMENT CONNECTORS. TYPE HE 10. GENERAL REQUIREMENTS.) |
| NF C93-429-1986 | 質量保證的電子元件.連接元件.間距為２·５４mm的印刷電路板用插入式多觸點接頭.ＨＥ１１型.一般規定 | (Electronic components under quality assessment. Connecting devices. Multicontact board mounted connectors for printed boards with 2,24 mm spacing. Type he 11. General requirements.) |
| NF C93-462-1981 | 電子設備元件.終端連接系統.可移動蠕變式模件.接頭.一般要求 | (Components for electronic equipment. Terminal junction system. Modules with removable crimp-type. Contacts. General requirements.) |
| NF C93-557-2001 | RF接頭、接頭電纜組件和電纜.互調程度測量 | (RF connectors, connector cable assemblies and cables - Intermodulation level measurement.) |
| NF C93-561-1981 | 電子元件.螺釘鎖定的小型同軸接頭.一般規定 | (Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.) |
| NF C93-562-1981 | 電子元件.彈簧栓耦接的小型同軸接頭.一般規定 | (Components for electronic equipment. Miniature coaxial connectors with snap-on coupling. General requirements.) |
| NF C93-564-1981 | 電子元件.接線柱鎖定射頻用同軸接頭（ＫＢＮ系列） | (Electronic components. Miniature coaxial connectors with bayonet coupling (kbn series). General requirements.) |
| NF C93-566-1981 | 電子元件.螺釘鎖定射頻用同軸接頭（ＫＮ系列）.一般規定 | (ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL REQUIREMENTS.) |
| NF C93-570-1986 | 電子元件.射頻同軸接頭.１·６－５·５系列.７５Ω阻抗.ＫＴＢ型 | (RF COAXIAL CONNECTORS 1,6-5,6 SERIE CHARACTERISTIC IMPEDANCE 75 OHMS. TYPE KTB.) |
| NF C93-571-1986 | 電子元件.射頻同軸接頭.１·０－２·３系列.ＫＴＡ型 | (RF COAXIAL CONNECTORS 1,0-2,3 SERIE TYPE KTA.) |
| NF C93-618-3-2002 | 質量評定的石英晶體裝置.第3部分:標準外形線和引線接頭 | (Quartz crystal units for assessed quality - Part 3 : standard outlines and lead connections.) |
| NF C93-711-5-6-2003 | 印制板和印制板組件.設計和使用.第5-6部分:附件(結合區/接頭)考慮.四面帶有J形引線的片狀載體 | (Printed boards and printed board assemblies - Design and use - Part 5-6 : attachment (land/joint) considerations - Chip carriers with J-leads on four sides.) |
| NF C93-867-2-1-2002 | 光纖通信系統中使用的接頭組件和互連元件.產品規范.第2-1部分:端接在IEC 60793-2的B1類單模纖維上的FC-PC型 | (Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1 : type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre.) |
| NF C93-867-3-1-2002 | 光纖通信系統中使用的接頭組件和互連元件.產品規范.第3-1部分:端接在IEC 60793-2的A1a類和A1b類多模纖維上 | (Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1 : type SG terminated on IEC 60793-2 category A1a and A1b multimode fibr) |
| NF C93-909-1-1-2001 | 光纖互連裝置和無源元件性能標準.第1-1部分:總則和指南.互連裝置(接頭) | (Fibre optic interconnecting devices and passive components peformance standard - Part 1-1 : general and guidance - Interconnecting devices (connectors).) |
| NF D36-105-1976 | 燃?xì)庀匆聶C(jī)內部連接用帶機械接頭的軟管 | (FLEXIBLE HOSE WITH MECHANICAL CONNECTORS FOR JOINTS INSIDE GAS-POWERED WASHING MACHINES.) |
| NF D36-107-1994 | 家政學.家用管道煤氣裝置連接用的帶機械接頭的11號或12號聚酰胺基未增強軟管 | (Household economy. Flexible piping based on polyamide 11 or 12 for the external connection of domestic appliances using gaseous fuels distributed by networks.) |
| NF D36-108-1983 | 家用灶具裝配用撓性金屬管內接頭 | (INTERNAL CONNECTION OF DOMESTIC COOKING APPLIANCES BY MEANS OF FLEXIBLE METAL HOSES.) |
| NF D36-210-2001 | 建筑物燃?xì)夤艿拦こ痰穆菁y接頭再密封的方法 | (Means for resealing threaded joints of gas pipework in buildings.) |
| NF E04-202-2-1996 | 工業加工用管道、管道元件和儀器.圖形符號表示.第2部分:管道和接頭 | (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 2 : pipelines and junctions.) |
| NF E22-601-1985 | 聯軸節.工業萬向接頭傳動.定義.特性 | (Couplings. Industrial cardan shaft. Definition. Characteristics.) |
| NF E22-603-1985 | 聯軸節.工業萬向接頭傳動.驗收 | (Couplings. Industrial cardan shaft. Acceptance.) |
| NF E22-604-1985 | 聯軸節.工業萬向接頭傳動.用法蘭盤固定 | (Couplings. Industrial cardan shaft. Flange mounting.) |
| NF E29-032-1985 | 工業管道.鋼制構件.對焊接頭.準備 | (Industrial pipework. Steel components. Butt welding ends. Preparation.) |
| NF E29-042-1-2000 | 法蘭及其接頭.螺栓連接.第1部分:螺栓連接的選擇 | (Flanges and their joints - Bolting - Part 1 : selection of bolting.) |
| NF E29-551-1939 | 鋼制氣體螺距的連接管.雙接頭 | (STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.) |
| NF E29-692-1-2001 | 氣瓶.微電子工業用氣瓶閥接頭.第1部分:輸出口接頭 | (Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1 : outlet connections.) |
| NF E29-692-2-2001 | 氣瓶.微電子工業用氣瓶閥接頭.第2部分:氣瓶閥接頭的規范和型式試驗 | (Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2 : specification and type testing for valve to cylinder connections.) |
| NF E29-901-1-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第1部分:有或無插件的非金屬平墊圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 1 : non-metallic flat gaskets with or without inserts.) |
| NF E29-901-2-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第2部分:與鋼法蘭一起使用的螺旋形繞制墊圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 2 : spiral wound gaskets for use with steel flanges.) |
| NF E29-901-3-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第3部分:非金屬PTFE包封墊圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 3 : non-metallic PTFE envelope gaskets.) |
| NF E29-901-4-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第4部分:與鋼法蘭一起使用的波紋形、平的或帶槽的金屬和嵌條金屬墊圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.) |
| NF E29-901-5-2001 | 法蘭及其接頭.分級標識法蘭用墊圈.第5部分:與鋼法蘭一起使用的金屬環接墊圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 5 : metallic ring-joint gaskets for use with steel flanges.) |
| NF E29-902-1-1997 | 法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第1部分:有或無襯套的非金屬平墊圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 1 : non-metallic flat gaskets with or without inserts.) |
| NF E29-902-2-1997 | 法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第2部分:與鋼法蘭配套使用的螺旋繞線墊圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 2 : spiral wound gaskets for use with steel flanges.) |
| NF E29-902-3-1997 | 法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第3部分:非金屬聚四氟乙烯封裝墊圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 3 : non-metallic PTFE envelope gaskets.) |
| NF E29-902-4-1997 | 法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第4部分:與鋼法蘭配套使用的波紋形、平的或開槽金屬和填充金屬墊圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.) |
| NF E39-012-2003 | 區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯隔熱和聚乙烯外護層的入戶鋼管用接頭組件 | (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies for steel service pipes, polyurethane thermal insulation and outer casing of polye) |
| NF E48-051-1992 | 液壓傳動.進氣口上的步進管螺紋接頭.接頭尺寸 | (Hydraulic fluid power. Pipe threaded connections for supply ports. Connecting dimensions.) |
| NF E48-064-1998 | 液壓傳動和一般用金屬導管的連接.第1部分:24喇叭形壓合接頭 | (Metallic tube connections for fluid power and general use. Part 1 : 24 degrees compression fittings.) |
| NF E49-090-2-2003 | 氣壓傳動.18mm和26mm五氣口方向控制閥.第2部分:帶光學電接頭的安裝面 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.) |
| NF E62-541-1984 | 工具自動變換工具用的連接錐.錐體Ｎ度４０，４５，５０的７／２４錐度工具柄的拉制接頭 | (Tool shank taper rate 7/24 for automatic tool changer. Retention knobs for shanks no 40, 45, 50.) |
| NF E62-542-1990 | 自動更換刀具用的7/24錐度刀柄.NO.30錐體及相應的拉伸接頭.尺寸 | (TOOL SHANKS WITH 7/24 TAPERS FOR AUTOMATIC TOOL CHANGERS. SHANKS NO 30 AND CORRESPONDING RETENTION KNOBS. DIMENSIONS.) |
| NF E86-400-1-2001 | 法蘭和接頭.襯墊環形法蘭連接的設計規則.第1部分:計算方法 | (Flanges and their joints - Design rules for gasketed circular flange connections - Part 1 : calculation method.) |
| NF F00-364-1991 | 通用鐵路設備.與電引線有關的產品.電線接頭的插片尺寸為:2.8×0.5,5×0.8,6.3×0.8mm | (RAILWAY MATERIAL IN GENERAL. PRODUCTS FOR ELECTRICAL CONNECTIONS. 2,8 X 0,5. 5 X 0,8. 6,3 X 0,8 MM.) |
| NF F01-082-1968 | 鐵路車輛.管路. 軟管接頭（非金屬） | (RAILWAY TRANSPORT EQUIPMENT. PIPEWORK. FIXING OF NON-METALLIC FLEXIBLE PIPES.) |
| NF F01-082M-1970 | 鐵路車輛.管路.軟管接頭(非金屬) | () |
| NF F01-810-1990 | 鐵路車輛.非合金鋼或低合金鋼電弧焊和電阻焊接頭.設計與施工規則 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.) |
| NF F01-812-1-1990 | 鐵路車輛.鋼的電弧和電阻焊接接頭.第1部分:對接焊和角接接頭中缺陷驗收準則 | (RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.) |
| NF F01-820-1992 | 鐵路車輛.車身用鋁合金焊接接頭(焊縫) | (RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.) |
| NF F11-013-1984 | 鐵路車輛.壓縮空氣制動. ２５mm自動制動裝置連接頭 | (Railway rolling stock. Compressed-air brake. Coupling head for 25 mm automatic brake pipe.) |
| NF F11-014-1970 | 鐵路車輛.壓縮空氣制動裝置. 直通式自動制動連接頭 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE. DIRECT BRAKE COUPLING HEAD.) |
| NF F11-015-1984 | 鐵路車輛. 空氣導管. ２５mm主要導管的連接頭 | (Railway rolling stock. Air pipes. Coupling head for 25 mm main brake pipe.) |
| NF F11-069-1988 | 鐵路車輛.氣動部件檢驗設備的用接頭 | (ROLLING STOCK. CONNECTIONS FOR PNEUMATIC-GEAR CONTROL EQUIPMENT.) |
| NF F11-101-1994 | 鐵路車輛.有凸緣的氣動要裝置的接頭和密封接觸面 | (Railway rolling stock. Connecting and airtight interfaces for flanged pneumatic apparatuses.) |
| NF F20-028-1950 | 通用鐵路設備.氣爐堵. 接頭 | (RAILWAY MATERIAL IN GENERAL. BUFFER SEALS.) |
| NF F24-005-1968 | 鐵路車輛.輕型器材.管道系統.擺動式管接頭 | (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. SWIVEL CONNECTORS.) |
| NF F31-011-1983 | 鐵路車輛.非飲用水貯水箱的注水接頭 | (Rolling stock. Connecting pipe for filling non-drinking water tanks.) |
| NF F36-001-1975 | 鐵路車輛.工業貨車. 標稱直徑為５０的通用“ＡＩＲ“ 調節接頭 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. STANDARD 50 MM AIR COUPLING.) |
| NF F36-002-1974 | 鐵路運輸設備.工業貨車.50MM氣體導徑管接頭 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.) |
| NF F36-003-1977 | 鐵路車輛.工業貨車. 標稱直徑為５０的通用“ＡＩＲ“ 接頭的安裝 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. PLUG FOR STANDARD 50 MM AIR COUPLING.) |
| NF F36-004-1977 | 鐵路車輛.工業貨車. ＧＵＩＬＬＥＭＩＮ系統對稱快速半接頭的安裝 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. ALTERNATIVES FOR FITTING STANDARD 50 MM AIR COUPLING.) |
| NF F38-001-1975 | 鐵路運輸設備.采用最大壓力為2.5bar排空的散裝粉狀產品運輸用氣動排空車.粉導管用統一接頭 | (RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE,FOR CARRYING POWDER GOODS IN BULK WITH DISCHARGE AT MAXIMUM OPERATING PRESSURE OF 2.5 BAR. STANDARD AIR PIPE CONNECTION.) |
| NF F38-002-1971 | 鐵路運輸設備.采用最大壓力為2.5bar排空的散粉狀產品運輸用氣動排空車.散粉導管用統一接頭 | (RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE FOR CARRYING POWDER GOODS IN BULK. DISCHARGE AT MAXIMUM SERVICE PRESSURE OF 2.5 BARS.) |
| NF F38-002M-1976 | 鐵路運輸設備.采用最大壓力為2.5bar的散裝粉狀產品運輸用氣動排空車.排空粉導管用統一接頭 | () |
| NF F61-011-1989 | 鐵路車輛.電氣連接用銅螺旋旋入接頭.緊固扭矩G.紡織和皮革 | (Railway rolling stock. Screwed joint for electrical copper connections driving torque.) |
| NF F61-021-1990 | 鐵路車輛.用于鋁制導電引線的螺紋接頭.上緊力矩 | (RAILWAY ROLLING STOCK. SCREWED JOINT FOR ELECTRICAL ALUMINIUM CONNCECTIONS DRIVING TORQUE.) |
| NF G07-310-1981 | 紡織.縫紉線試驗.接頭拉斷力的測定方法 | (TEXTILES. SEWING THREAD TESTS. METHOD OF DETERMINATION FO BREAKING LOAD OF SNARLING.) |
| NF G38-116-1996 | 土工織物.用大寬度法測定接頭/接縫處的拉伸試驗 | (GEOTEXTILES. TENSILE TEST FOR JOINTS/SEAMS BY WIDE/WIDTH METHOD. (EUROPEAN STANDARD EN ISO 10321).) |
| NF H50-010-2-2000 | 貨架接頭試驗方法.第2部分:貨架釘子和鉤環頭拉伸抗性和回縮特性的測定 | (Methods of test for pallet joints - Part 2 : determination of withdrawal and head pull-through resistance of pallet nails and staples.) |
| NF J33-372-1987 | 游艇.不銹鋼纜用拉緊裝置和活動纜的固定接頭.尺寸 | (Small craft. Rigging screws for stainless steel wire rope. Principal dimensions for forks, connection pins and eye-holes.) |
| NF J43-805-1-1997 | 造船和海上建筑物.飲用水箱注水接頭.第1部分:總要求 | (Shipbuilding and marine structures. Filling connection for drinking water tanks. Part 1 : general requirements.) |
| NF J43-805-2-1997 | 造船和海洋建筑物.飲水罐用裝水接頭.第2部分:組件 | (Shipbuilding and marine structures. Filling connection for drinking water tanks. Part 2 : components.) |
| NF J45-910-1949 | 造船工業.傳話管.接頭 | (SHIPBUILDING. VOICE-PIPES. JOINTS.) |
| NF J82-214-1967 | 造船工業.管道.接頭.分類和應用 | (INLAND NAVIGATION. PIPING. SEALING RINGS. CLASSIFICATION AND USE.) |
| NF L20-026-1995 | 航空航天系列.插銷.尺寸和接頭選擇.設計標準 | (Aerospace series. Spigots. Dimensions and fit selection. Design standard.) |
| NF L31-512-1966 | 球面軸承接頭.(RECH.). | (SPHERICAL BEARING JOINTS. (RECH.).) |
| NF L34-430-1954 | 機載儀表.撓性操縱接頭 | (FLIGHT DECK INSTRUMENTS,FLEXIBLE CONTROL CONNECTIONS. (RECH.).) |
| NF L35-140-1966 | 操縱連桿用叉形接頭.叉尾柄帶螺紋的式樣.(RECH.) | (FORK JOINTS FOR CONTROL LINKAGE. MODEL WITH THREADED END. (RECH.).) |
| NF L35-150-1974 | 滾珠球形接頭.無縱向槽的長螺紋桿.尺寸和負荷 | (ROD-ENDS WITH SELF-ALIGNING BALL BEARINGS. LONG THREADED SHANK WITHOUT KEYWAY. DIMENSIONS AND LOADS.) |
| NF L35-151-1974 | 滾珠球形接頭.有縱向槽的長螺紋桿.尺寸和負荷 | (ROD-ENDS WITH SELF-ALIGNING BALL BEARINGS. LONG THREADED SHANK AND KEYWAY. DIMENSIONS AND LOADS.) |
| NF L35-170-1974 | 有自潤滑裝置的球形接頭.無縱向槽的長螺紋桿.尺寸和負荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK WITHOUT KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-171-1974 | 有自潤滑裝置的球形接頭有縱向槽的長螺紋桿.尺寸和負荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK AND KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-450-1954 | 帶螺紋尾柄型傳動球形接頭 | (BALL JOINTS FOR CONTROLS,THREADED END. (RECH.).) |
| NF L35-451-1967 | 小型控制機構用帶螺紋尾柄的球形接頭 | (BALL JOINTS FOR SMALL CONTROLS,THREADED END (RECH.).) |
| NF L35-452-1980 | 小型傳動裝置用帶頸的螺紋端頭的球形接頭 | (BALL JOINTS FOR SMALL CONTROLS. THREADED END AND UNDERCUT.) |
| NF L36-121-1966 | 纜繩咬合帶孔接頭.(RECH.) | (EYE ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-122-1966 | 纜繩咬合叉形接頭.(RECH.) | (FORK ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-123-1966 | 連接纜繩和鏈的鏈接頭.(RECH.) | (CRIMPING FERRULES FOR ATTACHING CABLES TO CHAINS. (RECH.).) |
| NF L36-124-1966 | 纜繩咬合螺紋接頭.(RECH.) | (SCREWED ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-128-1966 | 纜繩咬合球形接頭.(RECH.) | (BALL ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-135-1971 | 拉緊螺桿叉形接頭 | (SCREWED END FORKS.) |
| NF L36-137-1971 | 轉動拉緊螺桿叉形接頭.技術規范 | (SCREWED END FORKS FOR BALL BEARINGS.) |
| NF L36-139-1971 | 嵌入纜繩的拉緊螺桿接頭 | (SCREWED ENDS FOR SWAGING ON CABLE.) |
| NF L36-141-1971 | 嵌入纜繩的帶孔接頭 | (EYE ENDS FOR SWAGING ON CABLE.) |
| NF L36-142-1971 | 嵌入纜繩的叉形接頭 | (FORK ENDS FOR SWAGING ON CABLE.) |
| NF L36-143-1971 | 嵌入纜繩的轉動叉形接頭 | (FORK ENDS FOR BALL BEARINGS FOR SWAGING ON CABLE.) |
| NF L36-144-1971 | 嵌入纜繩的球形接頭 | (BALL ENDS FOR SWAGING ON CABLE.) |
| NF L36-202-1989 | 航空和航天系列.鋼制抗腐蝕拉緊螺桿用帶眼接頭.尺寸和負載 | (Aerospace series. Eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.) |
| NF L36-203-1989 | 航空和航天系列.鋼制抗腐蝕拉緊螺桿用帶眼接頭.尺寸和負載 | (Aerospace series. Fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.) |
| NF L36-204-1989 | 航空和航天系列.鋼制抗腐蝕軸承用拉緊螺桿叉形接頭.尺寸和負載 | (Aerospace series. Fork-ends, threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads.) |
| NF L36-205-1989 | 航空和航天系列.嵌入操縱纜索的鋼制抗腐蝕拉緊螺桿接頭.尺寸和負載 | (AEROSPACE SERIES. STUD-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CALBLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2357).) |
| NF L36-206-1989 | 航空和航天系列.嵌入操縱纜索的鋼制抗腐蝕帶眼接頭.尺寸和負載 | (AEROSPACE SERIES. EYE-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2358).) |
| NF L36-207-1989 | 航空和航天系列.嵌入操縱纜索的鋼制抗腐蝕叉形接頭.尺寸和負載 | (AEROSPACE SERIES. FORK-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2359).) |
| NF L36-208-1989 | 航空和航天系列.抗嵌入操縱纜索的鋼制抗腐蝕球體端面接頭.尺寸和負載 | (AEROSPACE SERIES. FORK-ENDS,FOR ROLLING BEARINGS IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2360).) |
| NF L36-209-1989 | 航空和航天系列.嵌入操縱纜索的鋼制抗腐蝕球端面接頭.尺寸和負載 | (AEROSPACE SERIES. BALL-ENDS,DOUBLE SHANK IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2361).) |
| NF L36-210-1989 | 航空和航天系列.嵌入操縱纜索的鋼制抗腐蝕球面接頭.尺寸和負載 | (AEROSPACE SERIES. BALL-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2362).) |
| NF L36-211-1989 | 航空系列.操縱纜索的拉緊螺桿接頭.尺寸 | (AEROSPACE SERIES. LOCKING CLIPS FOR TURNBUCKLES OF CONTROL CABLES. DIMENSIONS. (EUROPEAN STANDARD EN 2363).) |
| NF L36-222-1991 | 航空和航天系列.帶自潤滑油封和螺紋安裝桿的球形可調接頭:螺紋直徑1.5.尺寸和負荷.(歐洲標準EN 2790) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK WITH ENGAGEMENT : 1,5 THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2790).) |
| NF L36-223-1991 | 航空和航天系列.帶自潤滑油封和螺紋安裝桿的單包邊可調接頭:螺紋直徑1.5.尺寸和負荷.(歐洲標準EN 2791) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SINGLE FORK AND THREADED SHANK WITH ENGAGEMENT : 1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2791).) |
| NF L36-224-1991 | 航空和航天系列.帶自潤滑油封和螺紋安裝桿的雙包邊可調接頭.螺紋直徑1.5.尺寸和負荷.(歐洲標準EN 2792) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,DOUBLE FORK AND THREADED SHANK WITH ENGAGEMENT :1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2792).) |
| NF L40-100-1966 | 飛行器的液體裝置.管道接頭基本尺寸 | (INSTALLATION OF FLUIDS ABOARD AIRCRAFT. BASIC DIMENSIONS OF HOSE CONNECTIONS.) |
| NF L40-101-1974 | 軸向密封接頭.ＩＳＯ米制陰螺紋剖面的凹端和BNAE公差 | (CONNECTORS,AXIAL SEALING. INTERNAL THREAD BOSSES,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L40-102-1966 | 飛機的液體裝置.國際單位米制螺紋凸端的軸向密封接頭 | (AIRCRAFT FLUID INSTALLATIONS. CONNECTORS,AXIAL SEALING,MALE THREAD FITTINGS. SIM THREAD. (RECH.).) |
| NF L40-103-1974 | 軸向密封接頭.ISO米制螺紋剖面的凸端和BNAE公差 | (CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L40-104-1973 | 軸向密封接頭.ISO米制螺紋剖面的凸端和ISO米制螺紋公差 | (CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L40-105-1973 | 軸向密封接頭.ISO 米制陰螺紋剖面凸端和ISO米制螺紋公差 | (CONNECTORS,AXIAL SEALING. INTERNAL THREAD BOSSES,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L40-112-1987 | 航空和航天.經向密封接頭.陽螺紋剖面和ISO 米制螺紋公差.尺寸 | (Aerospace fitting joint assembly, radial sealing. Male thread fittings. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-113-1987 | 航空和航天.經向密封接頭.陰螺紋剖面和ISO 米制螺紋公差.尺寸 | (Aerospace fitting joint assembly, radial sealing. Internal thread bosses. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-114-1987 | 航空和航天.徑向密封接頭.環形接頭.尺寸 | (Aerospace fitting joint assembly, radial sealing. O-rings. Dimensions.) |
| NF L40-120-1983 | 液壓系統.米制接頭的接觸面 | (FLUID SYSTEMS. INTERFACE OF METRIC COUPLINGS.) |
| NF L41-210-1983 | 液體系統.軟管、管道和接頭的脈沖試驗 | (Fluid systems. Impulse testing of hose, tubing and fittings.) |
| NF L41-212-1983 | 液壓系統.管子和接頭的熱沖擊試驗 | (FLUID SYSTEMS. THERMAL SHOCK TESTING OF PIPING AND FITTINGS.) |
| NF L41-230-1985 | 飛行器.液壓管路組裝和接頭.旋轉彎曲試驗 | (AIRCRAFT. HYDRAULIC TUBING JOINTS AND FITTINGS. ROTARY FLEXURE TEST.) |
| NF L43-110-1966 | 飛行器的液體裝置.軟管用插入接頭 | (AIRCRAFT FLUID INSTALLATIONS. PLUG-IN UNIONS FOR FLEXIBLE HOSES.) |
| NF L43-210-1973 | 環形接頭（RT）、一般互換條件、ISO 米制螺紋剖面和BNAE公差 | (CYLINDRICAL UNION. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L43-211-1973 | 環形接頭用陽螺紋部件 | (MALE PARTS FOR CYLINDRICAL UNION.) |
| NF L43-212-1973 | 環形接頭用連接螺母 | (UNION NUTS FOR CYLINDRICAL UNION.) |
| NF L43-213-1973 | 環形接頭的雙外螺絲接頭 | (DOUBLE UNIONS FOR CYLINDRICAL UNION.) |
| NF L43-215-1973 | 環形接頭（RT）.一般互換條件.ISO 米制螺紋剖面和公差 | (CYLINDRICAL UNION. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-310-1973 | 可旋轉管接頭（RO）.一般互換條件.ISO 米制螺紋剖面和BNAE公差 | (SWIVEL CONNECTORS. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L43-311-1973 | 低壓旋轉接頭的環形部分 | (SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,ANNULAR PART.) |
| NF L43-312-1973 | 低壓旋轉接頭的空心螺栓 | (SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,BANJO BOLT.) |
| NF L43-315-1973 | 旋轉接頭（RO）.一般互換條件.ISO 米制螺紋剖面和公差 | (SWIVEL CONNECTORS. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-360-2002 | 航空航天系列.鈦合金管聯接器8°30'.帶螺紋的管端彎接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded, end, threaded.) |
| NF L43-362-2002 | 航空航天系列. 8°30'鈦合金管連接件.直接頭 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight.) |
| NF L43-363-2002 | 航空航天系列. 8°30'鈦合金管連接件.直減徑接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, straight, reducer.) |
| NF L43-364-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔壁直角管接頭 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight bulkhead.) |
| NF L43-365-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔壁直角彎接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, welded end.) |
| NF L43-366-2002 | 航空航天系列.鈦合金管聯接器8°30'.帶密封環的異徑管端接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors, reduced pipe end, with lockring.) |
| NF L43-390-2002 | 航空航天系列.8°30'鈦合金管聯接件. 長型隔壁直通接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long.) |
| NF L43-391-2002 | 航空航天系列.8°30'鈦合金管聯接件. 長型隔壁直通接頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long, welded end.) |
| NF L43-396-2002 | 航空航天系列.鈦合金管聯接器8°30'.十字T形管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, cross.) |
| NF L43-407-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用焊接端部的悶頭管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead welded end, for repair.) |
| NF L43-408-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用長的焊接端部的悶頭管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead long welded end, for repair.) |
| NF L43-409-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用焊接端加螺紋的管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded end threaded for repair.) |
| NF L43-550-1988 | 航空航天輪機設備.快卸低壓接頭.一般互換條件 | (AEROSPACE. CABIN EQUIPMENTS. LOW PRESSURE QUICK DISCONNECT COUPLING. GENERAL CHARACTERISTICS.) |
| NF L43-581-1967 | 飛行器的液體裝置.管端插入接頭.(RECH.) | (AIRCRAFT FLUID INSTALLATIONS. PLUG-IN UNIONS,TUBE END. (RECH.).) |
| NF L43-582-1966 | 飛行器液體裝置.橡膠管接頭.(RECH.) | (AIRCRAFT FLUID INSTALLATIONS. CONNECTORS FOR RUBBER HOSE. (RECH.).) |
| NF L43-586-1972 | 螺釘固定光滑接頭.ISO 螺紋剖面和公差 | (PLUG-IN UNIONS,TUBE END. ISO THREAD PROFILE AND TOLERANCES.) |
| NF L43-587-1973 | 橡膠管接頭.ISO 米制螺紋剖面和公差 | (RUBBER HOSE CONNECTIONS. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-601-1974 | 帶法蘭的接頭.連接法蘭 | (FLANGED CONNECTIONS - FLANGES FOR UNIONS.) |
| NF L43-602-1974 | 帶法蘭的接頭.凹端 | (FLANGED CONNECTIONS - INTERNAL BOSSES.) |
| NF L43-603-1974 | 帶法蘭的接頭.環形接頭 | (FLANGED CONNECTIONS. O-RINGS.) |
| NF L43-611-1977 | 不銹鋼制釬接帶法蘭的直接頭 | (FLANGED STRAIGHT UNIONS,SOLDER TYPE,STAINLESS STEEL.) |
| NF L43-618-2003 | 航空航天系列.耐熱鋼制37度管接頭.轉動螺套.英制 | (Aerospace series - Pipe coupling 37 o, in heat resisting steel - Swivel nuts - Inch series.) |
| NF L43-619-2003 | 航空航天系列.耐熱鋼制37度管接頭.焊接端直通接管頭.英制 | (Aerospace series - Pipe couplings, 37 o, spherical, in heat resisting steel - Straight nipples, welded end - Inch series.) |
| NF L43-620-2003 | 航空航天系列.60度鈦合金管接頭.油口接頭 | (Aerospace series - Pipe couplings, 60 o, in titanium alloy - Port connection.) |
| NF L43-621-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.直通轉動螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight.) |
| NF L43-626-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.拉力張線用轉動螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire.) |
| NF L43-627-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.焊接的90度彎頭 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.) |
| NF L43-628-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.鋼FE-PA13制拉力張線 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA13.) |
| NF L43-629-2003 | 航空航天系列.耐熱鋼制37度球形管接頭.端部焊接的90度彎管接頭.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Elbow 90 o nipples, welded end - Inch series.) |
| NF L43-630-2003 | 航空航天系列.耐熱鋼制37度球形管接頭.加螺紋直活管節.英制 | (erospace series - Pipe coupling 37 o, spherical, in heat resisting steel - Straight unions, threaded - Inch series.) |
| NF L43-631-2003 | 航空航天系列.耐熱鋼制37度球形管接頭.端部焊接的箍.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - ferrules, welded end - Inch series.) |
| NF L43-632-2003 | 航空航天系列.耐熱鋼制37度管接頭.管套組件.英制 | (Aerospace series - Pipe coupling, 37 o, in heat resisting steel - Cap assemblies - Inch series.) |
| NF L43-633-2003 | 航空航天系列.耐熱鋼制37度球形管接頭.端部焊接的三通接頭.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.) |
| NF L43-634-2003 | 航空航天系列.高達21000 kPa的37度球形管接頭.英制.技術規范 | (Aerospace series - Pipe coupling, 37 o, spherical, up to 21 000 kPa - Inch series - Technical specification.) |
| NF L43-635-2003 | 航空航天系列.耐熱鋼制焊接管接頭.90度彎頭.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.) |
| NF L43-636-2003 | 航空航天系列.耐熱鋼制焊接管接頭.減速器.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.) |
| NF L43-637-2003 | 航空航天系列.耐熱鋼制焊接管接頭.三通管.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series.) |
| NF L44-070-1979 | 空中加油.接頭的尺寸特性和功能 | (IN-FLIGHT REFUELLING EQUIPMENT. DIMENSIONAL AND FUNCTIONAL CHARACTERISTICS OF CONNECTIONS.) |
| NF L44-511-1985 | 飛機的地面供給.小流量接頭 | (Ground supply. Low flow connection.) |
| NF L44-512-1973 | 低壓接頭.ISO 米制螺紋剖面和BNAE公差 | (AIRCRAFT GROUND SUPPLY. LOW PRESSURE CONNECTION. ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES. (RECH.).) |
| NF L44-514-1975 | 低壓氣動起動接頭 | (Low pressure compressed air starting connections.) |
| NF L44-515-1989 | 航空和航天流體裝置里的供氧接頭 | (Aerospace. Gaseous oxygen replenishment for use in fluid systems (old type). Dimensions (inch series).) |
| NF L44-516-1979 | 液氧流入接頭 | (Liquid oxygen replenishment couplings.) |
| NF L44-517-1980 | ISO 米制螺紋剖面和公差低壓接頭 | (Low pressure connections, ISO metric thread profile and tolerances.) |
| NF L44-518-1990 | 機艙地面增壓試驗用接頭 | (Aircraft. Ground pressure testing connections for pressure cabins. Dimensions (inch series).) |
| NF L44-519-1984 | 氧氣面罩和氧氣源的接頭 | (Joints for connecting crew member`S regulators masks to oxygen sources.) |
| NF L44-520-1974 | 空調用２００mm接頭 | (200 mm air-conditioning connections.) |
| NF L44-521-1974 | 空調用１３０mm接頭 | (130 mm air-conditioning connections.) |
| NF L44-532-1977 | 飛機地面給養.加壓飲用水源接頭 | (AIRCRAFT GROUND SUPPLY. CONNECTIONS FOR DRINKING WATER SUPPLIED UNDER PRESSURE.) |
| NF L44-540-1974 | 甲醇水壓力供水接頭.標定尺寸19mm | (Water-methanol pressure connections. Nominal dimension 19 mm.) |
| NF L44-541-1974 | 甲醇水壓力供水接頭.標定尺寸38mm | (Water-methanol pressure connections. Nominal dimension 38 mm.) |
| NF L44-550-1978 | 潤滑油壓力注入接頭 | (Pressure re-oiling connection.) |
| NF L44-570-1980 | 飛機地面給養.燃料加壓注入接頭 | (Aircraft ground supply. Pressure refuelling connections.) |
| NF L44-615-1989 | 航空和航天.液體系統用的液態氧的.注入接頭尺寸(英制) | (Aerospace. Gaseous oxygen replenishment for use in fluid systems (new type). Dimensions (inch series).) |
| NF L46-012-1986 | 環形接頭.６４Ｃ８氧烴橡膠.精確度Ａ驗.質量分類 | (O-RINGS. FLUOROCARBON RUBBER 64C8. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-013-1986 | 環形接頭.２１Ａ７丙烯丁二烯--晴橡膠.精確度Ａ級.質量３級 | (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 21A7. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-014-1986 | 環形接頭.２０Ａ８丙烯丁二烯－晴橡膠.精確度Ａ級.質量３級 | (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20A8. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-015-1987 | 環形接頭.２０Ｂ８丙烯丁二烯- 晴橡膠.精確度Ａ級.性能３級 | (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20B8. PRECISION CLASS A. PERFORMANCE CLASS 3.) |
| NF L46-016-1987 | 環形接頭.４１Ｂ８丁烯丙烯橡膠.精確度Ａ級.性能３級 | (O-RINGS. ETHYLENE-PROPYLENE RUBBER 41B8. PRECISION CLASS A. PERFORMANCE CLASS 3.) |
| NF L46-322-1980 | NFL ４０- １０４和類似型式接頭陽螺紋端用金屬保護外殼.ISO 米制螺紋剖面和公差 | (PROTECTIVE,METALLIC,CAP,FOR NF L 40-104 MALE FITTINGS AND SIMILAR TYPES. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L46-331-2002 | 航空航天系列.8°30'鈦合金管接頭.壓合栓 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Pressure plugs.) |
| NF L46-332-2002 | 航空航天系列.鈦合金 8°30'管接頭.帶動態梁密封端的單頭卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, blind, with dynamic beam seal end.) |
| NF L46-334-2002 | 航空航天系列.8°30'管接頭.螺母防護帽 | (Aerospace series - Pipe coupling 8 o30' - Protective caps.) |
| NF L46-335-2002 | 航空航天系列.8°30'接頭.外螺紋防護栓 | (Aerospace series - Pipe coupling 8 o30' - Protective plugs with external threads.) |
| NF L46-336-2002 | 航空航天系列.8°30'接頭.內螺紋防護栓 | (Aerospace series - Pipe coupling 8 o30' - Protective caps with internal threads.) |
| NF L48-135-1972 | 燃料計量器、燃料泵等接頭的使用互換性（ISO 螺紋剖面和公差） | (IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (ISO THREAD PROFILE AND TOLERANCES).) |
| NF L54-191-1988 | 航空器材.后部非密封的閉鎖的,帶塑料箱的,使用溫度55℃-175℃的密封矩形電接頭 | (CONNECTORS,ELECTRICAL,RECTANGULAR,WITH SEALED AND NON SEALED REAR,PLASTIC SHELL,LOCKING DEVICE AND OPERATING TEMPERATURES. 55 DEGREES C TO 175 DEGREES C.) |
| NF L92-311-1966 | 機上起重支墊用回轉接頭.(RECH.) | (SWIVEL JOINTS FOR AIRCRAFT JACKING PADS. (RECH.).) |
| NF M82-237-1955 | 煤礦器材和工具.煤礦器材和工具.壓縮空氣管.變徑管接頭 | (MINING EQUIPMENT. COMPRESSED AIR PIPES. CONICAL REDUCTION COUPLINGS.) |
| NF M82-426-1987 | 煤礦器材.液壓傳送接頭.尺寸和特性 | (Coal mine equipment. Connections for hydraulic transmissions. Sizes and characteristics.) |
| NF M88-081-1974 | 道路油罐車.液態化學產品金屬油罐.排放裝置.快速接頭 | (ROAD TANKERS. METAL TANKERS FOR LIQUID CHEMICAL PRODUCTS. DISCHARGE DEVICES : QUICK-ACTION COUPLINGS.) |
| NF M88-768-1980 | 液化烴容器裝置.氣態物質用接頭軟管 | (INSTALLATIONS FOR LIQUEFIED HYDROCARBONS IN CONTAINERS. FLEXIBLE COUPLINGS FOR GAS PHASE.) |
| NF M88-769-1977 | 商用丙烷可動容器裝置.接頭.自動換向裝置.制造.功能.試驗 | (COMMERCIAL PROPANE INSTALLATIONS IN MOVABLE CONTAINERS. AUTOMATIC COUPLER-REVERSER. CONSTRUCTION-OPERATION-TESTS.) |
| NF M88-770-1986 | 商用丁烷鋼瓶裝置.接頭.自動換向裝置.制造.功能.試驗 | (COMMERCIAL BUTANE INSTALLATIONS IN CYLINDERS. AUTOMATIC CHANGEOVER. CONSTRUCTION. OPERATION. TESTS.) |
| NF P12-602-2000 | 圬工輔助成份的試驗方法.第2部分:灰漿粘結處預制床接頭增強的粘結強度的測定 | (Methods of test for ancillary components for masonry - Part 2 : determination of bond strength of prefabricated bed joint reinforcement in mortar joints.) |
| NF P16-304-1997 | 地下排水管道用纖維水泥管.第1部分:重力循環系統用管子、接頭和配件(歐洲標準EN 588-1) | (Fibre-cement pipes for sewers and drains. Part 1 : pipes, joints and fittings for gravity systems.) |
| NF P16-321-1-1996 | 排水排污用陶管、配件和管接頭.第1部分:要求(歐洲標準EN 295-1) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 1 : requirements.) |
| NF P16-321-4-1995 | 排水管和污水管用的陶土管和配件及管接頭.第4部分:專用配件、轉換接頭和可互換附件的要求(EN 295-4) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 4 : requirements for special fittings, adaptors and compatible accessories.) |
| NF P16-321-5-1994 | 排水及污水用陶土管道,配件和管接頭.第5部分:多孔陶土管道和配件的要求(EN 295-5) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.) |
| NF P16-321-6-1996 | 排水及污水用陶土管道.配件和管接頭.第6部分:陶土管道的出入水孔的要求 | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.) |
| NF P16-321-7-1996 | 排水及污水用陶土管道.配件和管接頭.第7部分:陶土管道和管道插孔用連接件的要求 | (Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.) |
| NF P16-361-5-1997 | 無壓地下排水系統用塑料管道系統.不飽和聚酯樹脂(UP)基礎上的玻璃增強熱固塑料(GRP).第5部分:接頭的適用性 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.) |
| NF P21-380-2002 | 木結構.試驗方法.機械緊固件用接頭的循環試驗 | (Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners.) |
| NF P24-505-2000 | 門窗制造用未增塑聚氯乙烯型材.焊接彎頭和T接頭強度的測定 | (Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints.) |
| NF P41-302-1994 | 纖維水泥制品.壓力管道和接頭(歐洲標準EN 512) | (Fibre-cement products. Pressure pipes and joints.) |
| NF P41-400-1995 | 包括接頭和配件的混凝土壓力管的共同要求 | (Common requirements for concrete pressure pipes including joints and fittings.) |
| NF P41-401-1995 | 包括接頭和配件的非圓柱型加筋混凝土壓力管 | (Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings.) |
| NF P41-402-1995 | 包括接頭和配件的圓柱型加筋混凝土壓力管 | (Reinforced concrete pressure pipes, cylinder type, including joints and fittings.) |
| NF P41-403-1995 | 包括接頭和配件的圓柱型和非圓柱型預應力混凝土壓力管及管用預應力鋼的具體要求 | (Prestressed concrete pressure pipes, cylcinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes.) |
| NF P85-210-1-2002 | DTU 44.1.建筑工程.使用密封劑的密封接頭面.第1部分:技術條款 | (DTU 44.1 - Building works - Sealing joint front by implementation of sealants - Part 1 : technical clauses.) |
| NF P85-210-2-2002 | DTU 44.1.建筑工程.個人合同.使用密封劑的密封接頭面.第2部分:特殊條款 | (DTU 44.1 - Building works - Private contracts - Sealing joint front by implementation of sealants - Part 2 : special clauses.) |
| NF R12-636-1998 | 道路車輛.液壓制動系統.導管、螺紋孔、外螺紋接頭和軟管管端接頭 | (Road vehicles. Hydraulic braking systems. Simple flare pipes, tapped holes, male fittings and hose end fittings.) |
| NF R13-439-1998 | 道路車輛.電子線路板的成組配線裝置.第1部分:單極聯接接頭標記.尺寸與特殊要求 | (Road vehicules. Connections for on-board electrical wiring harnesses. Part 1 : tabs for single-pole connections. Dimensions and specific requirements.) |
| NF R13-702-1984 | 道路車輛.報警插頭.接頭.機械特性 | (ROAD VEHICLES. DIAGNOSTIC PLUG. CONNECTOR. MECHANICAL CHARACTERISTICS.) |
| NF R16-207-1955 | 平圓柱形接頭軟管 | (FLEXIBLE PIPES WITH SMOOTH CYLINDRICAL ENDS.) |
| NF R16-208-1955 | 不對稱接頭軟管 | (FLEXIBLE PIPES WITH ASYMMETRICAL ENDS.) |
| NF R16-307-1988 | 小量操縱球形接頭 | (ROAD VEHICLES. KNUCKLE JOINTS FOR SMALLE CONTROLS. DIMENSIONAL CHARACTERISTICS.) |
| NF R16-326-1986 | 道路車輛.空氣濾清器接頭.A型和B型.尺寸 | (ROAD VEHICLES. AIR FILTER CONNECTIONS. TYPES A AND B. DIMENSIONS.) |
| NF R95-403-1970 | 雙錐套管道接頭.連接尺寸 | (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.) |
| NF R95-404-1968 | 錐頸雙拼式管道接頭 | (PIPE FITTINGS IN TWO PARTS WITH TAPERED BEARING.) |
| NF R95-405-1970 | 雙錐套管道接頭.插入件 | (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. INSERTS.) |
| NF R95-406-1975 | 能量?jī)?chǔ)備制動系統.螺旋連接接頭和彈性墊圈 | (ENERGY RESERVE BRAKE SYSTEMS. COUPLINGS WITH THREAD-CONNECTIONS AND FLEXIBLE GASKETS.) |
| NF R99-021-1953 | 柔性接頭墊圈 | (RINGS FOR FLEXIBLE JOINTS.) |
| NF S61-704-1966 | 消防設備.壓力輸送用40和65mm自動關閉對稱半接頭 | (FIRE FIGHTING EQUIPMENT. SELF-SEALING SYMMETRICAL HALF COUPLINGS,SIZES 40 AND 65.) |
| NF S61-705-1966 | 消防設備.AR型100mm自動關閉對稱半接頭 | (FIRE FIGHTING EQUIPMENT. SELF-SEALING SYMMETRICAL HALF COUPLINGS,SIZE 100. TYPE AR.) |
| NF S61-706-1966 | 消防設備.GUILLEMIN型自動關閉對稱接頭半殼體或制動片的定位 | (FIRE FIGHTING EQUIPMENT. POSITIONING OF THE LUGS OR JAWS ON GUILLEMIN-TYPE AND SELF-SEALING SYMMETRICAL COUPLINGS.) |
| NF S61-707-1973 | 消防設備.名義直徑300救火通風用半接頭 | (FIRE FIGHTING EQUIPMENT. VENTILATION. TYPE SEMI-COUPLINGS FOR FIRE USE : DN 300.) |
| NF S76-024-1-2000 | 呼吸保護裝置.氣瓶閥.插入式連接器用螺紋接頭 | (Respiratory protective devices - Gas cylinder valves - Part 1 : thread connections for insert connector.) |
| NF S76-024-2-1999 | 呼吸保護裝置.氣瓶閥.插座接頭 | (RESPIRATORY PROTECTIVE DEVICES. GAS CYLINDER VALVES. PART 2 : OUTLET CONNECTIONS. (EUROPEAN STANDARD EN 144-2).) |
| NF S90-110-1996 | 便攜式氣瓶.醫用指針指示馬蹄型閥門排出口接頭 | (Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use.) |
| NF S90-425-1989 | 外科植入物.矯形外科用的附件接頭.一般規范 | (IMPLANTS FOR SURGERY. STAPLES WITH PARALLEL LEGS FOR ORTHOPAEDIC USE. GENERAL REQUIREMENTS.) |
| NF S91-313-1997 | 牙科設備.給排水管接頭 | (Dental equipment. Connections for supply and waste lines.) |
| NF T47-301-1972 | 橡膠.管道接頭用壓制和模制合成橡膠墊圈和型材.材料的一般特性 | (RUBBER MOLDED AND EXTRUDED SEALING RINGS AND PROFILES FOR PIPE WORK. GENERAL SPECIFICATIONS OF MATERIALS.) |
| NF T47-305-1-1996 | 彈性密封.排水設施用管接頭密封用材料的要求.第1部分:硫化橡膠 | (Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications. Part 1 : vulcanized rubber.) |
| NF T47-305-2-2000 | 彈性密封件.水和排水設施用管接頭密封件材料的要求.第2部分:熱塑性彈性材料 | (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2 : thermoplastic elastomers.) |
| NF T47-305-3-2000 | 彈性密封件.水和排水設施用管接頭密封件材料的要求.第3部分:硫化橡膠泡沫材料 | (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3 : cellular material of vulcanized rubber.) |
| NF T47-305-4-2000 | 彈性密封件.水和排水設施用管接頭密封件材料的要求.第4部分:鑄造聚氨基甲酸乙酯密封元件 | (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4 : cast polyurethane sealing elements.) |
| NF T54-012-1995 | 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭.外部液壓條件下防漏密封試驗方法 | (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).) |
| NF T54-029-1981 | 塑料.未增塑聚氯乙烯模制接頭.壓力系列.規范 | (Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.) |
| NF T54-037-1981 | 塑料.未增塑聚氯乙烯管道元件.生活污水無壓排放設備用密封圈接頭.使 用特性 | (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.) |
| NF T54-038-1981 | 裝配有壓力管用密封圈的未增塑聚氯乙烯管和接頭.尺寸特性 | (Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Dimensional caracteristics.) |
| NF T54-039-1988 | 塑料.未增塑聚氯乙烯壓力管用密封圈的固定接頭.使用特性.規范 | (Plastics. Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Fitness for use.) |
| NF T54-041-1994 | 塑料管道系統.壓力管道用彈性密封圈型接頭的熱注塑料配件.耐無軸向力短暫內壓力性能的試驗方法 | (Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.) |
| NF T54-042-1994 | 塑料管道系統.壓力管道用溶劑-水泥膠合接頭的注模承窩配件 | (Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.) |
| NF T54-044-1978 | 塑料.聚乙烯管與接頭.按標定密度和熱融流動指數命名的聚乙烯的名稱 | (POLYETHYLENE (PE) PIPES AND FITTINGS. DESIGNATION OF POLYETHYLENE BASED ON NOMINAL DENSITY AND MELT FLOW INDEX.) |
| NF T54-051-1979 | 聚乙烯管道.機械接頭的載荷減小.試驗方法與規 | (Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.) |
| NF T54-052-2001 | 人類飲用水輸送用塑料管道系統.遷移評定.塑料管和配件及其接頭遷移值的測定 | (Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.) |
| NF T54-090-1976 | 塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接頭顏色 | (PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.) |
| NF T54-095-1985 | 塑料.未增塑聚氯乙烯管件接頭粘合溶劑.使用特性 | (Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.) |
| NF T54-905-2002 | 塑料管道系統.熱塑性壓力管用端部承載或非端部承載組件和接頭.內部水壓下長期無漏損的試驗方法 | (Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.) |
| NF T54-906-1996 | 塑料管道系統.埋置非壓管道設備用熱塑管道系統.彈性密封環型接頭耐泄漏性試驗方法 | (Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test methods for leaktightness of elastomeric sealing ring type joints.) |
| NF T54-923-2000 | 塑料管道系統.與未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯彈性密封環式套筒接頭.負壓下密封試驗法 | (Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.) |
| NF T54-926-2000 | 熱塑性管道系統.地下常壓排污設施用接頭.用密封壓力評定法測定帶熱塑性彈性體(TPE)密封件接頭的長期密封性 | (Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the) |
| NF T54-937-2000 | 塑料管道系統.與未增塑聚氯乙烯管一起使用的彈性密封環式套筒接頭.內壓下角度偏轉密封試驗法 | (Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang) |
| NF T57-214-5-1996 | 壓力下地下排水系統用塑料管道系統.不飽和聚酯樹脂基玻璃增強熱固塑料.第5部分:接頭的適用性 | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.) |
| NF T57-215-1996 | 塑料管道系統.玻璃增強熱固性塑料管和配件接頭.撓性和鉸鏈接頭耐泄漏和損傷試驗方法 | (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.) |
| NF T57-224-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)構件.檢驗帶有彈性密封件的剛性鎖定的管套筒接頭設計的試驗方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.) |
| NF T57-225-1997 | 塑料管道系統.玻璃纖維增強熱固性塑料元件.驗證膠合管套筒接頭設計的測試方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.) |
| NF T76-119-2003 | 膠粘劑.非結構應用中的木材膠粘劑.搭接接頭的抗拉伸剪切強度的測定 | (Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints.) |
| NF T81-101-1975 | 液態化學制品和帶1６型旋轉同步額定壓力的烴類對稱半接頭(吉爾曼體系)(ＧＵＩＬＬＥＭＩＮ)的運輸和裝卸 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS AND HYDROCARBONS-HALF SYMETRIC COUPLING(GUILLEMIN SYSTEM)WITH ROTATING LOCK-NOMINALPRESSURE 16.) |
| NF T81-106-1976 | 噴霧狀產品的運輸.最大壓力２．５bar氣動排空的道路罐車.接頭 | (TRANSPORTATION OF POWDERY PRODUCTS. ROAD TANKERS WITH PNEUMATIC DISCHARGE UNDER MAXIMUM PRESSURE 2.5 BAR. COUPLING.) |
| NF T81-125-1987 | 冷凍液化氣容器.沉淀分離器.Ｎ2 Ｏ或冷凍液ＣＯ2 的接頭 | (REFRIGERATED LIQUEFIED GAS CONTAINERS. TRANSFER DEVICES. COUPLINGS FOR REFRIGERATED N2O OR CO2.) |
| NF T81-126-1987 | 冷凍液化氣容器.沉淀分離器.冷凍液態氧或氮的ＤＮ４０接頭 | (REFRIGERATED LIQUEFIED GAS CONTAINERS. TRANSFER DEVICES. DN 40 COUPLINGS FOR REFRIGERATED O2 OR N2.) |
| NF U14-406-1992 | 農業拖拉機和機械.通用快速動作液壓接頭 | (Agricultural trators and machinery. General purpose quick-action hydraulic couplers.) |
| NF Z85-506-1-2002 | 模擬和綜合業務數字網(ISDN)用戶線路的電路試驗用局域交換Q3接口.第1部分:Q3接頭規范 | (Q3 interface exchange at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) suscriber lines - Part 1 : Q3 interface specification.) |
| XP P98-090-1999 | 與膨脹節有關的試驗.瀝青插塞接頭的永久變形.輪轍試驗 | (Tests relating to expansion joints - Asphalt plug joint permanent deformation - Wheel tracking test.) |
| 編號 | 中文名稱 | 英文名稱 |