| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 3156-11.0.2-1998
| 燃?xì)夥治?第11部分:天然氣.第0節:通則.第2小節:天然氣質量命名符號
| Analysis of fuel gases - Methods for non-manufactured gases - General - Quality designation for natural gas
|
| BS 3156-11.1.2-1997
| 燃?xì)夥治?第11部分:天然氣.第1節:碳?xì)浠衔锖投栊詺怏w分析.第2小節:氣體色譜法展開分析
| Analysis of fuel gases - Methods for non-manufactured gases - Hydrocarbons and inert gases - Extended analysis by gas chromatographic method
|
| BS 3156-11.2.3-1986
| 燃?xì)獾姆治?第11部分:天然氣.第2節:潛在液體烴含量測定.第3小節:容積法
| Analysis of fuel gases - Methods for non-manufactured gases - Determination of potential hydrocarbon liquid content - Volumetric method
|
| BS 3156-11.6-1997
| 燃?xì)夥治?第11部分:天然氣.第6節:含水量高壓測定法
| Analysis of fuel gases - Methods for non-manufactured gases - Determination of water content at high pressure
|
| BS 4089-1999
| 液化石油氣和液化天然氣用金屬軟管組件規范
| Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
|
| BS 7576-1992
| 液化天然氣的輸送管道連續取樣方法
| Method for continuous sampling of liquefied natural gas (LNG) in transfer pipelines
|
| BS DD ISO/TS 24817-2007
| 石油、石化和天然氣工業.管道綜合修理.資格認定、設計、安裝、試驗和驗收
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection
|
| BS EN 1160-1997
| 液化天然氣用設施和裝置.液化天然氣的一般特性
| Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas
|
| BS EN 12065-1998
| 液化天然氣設備和安裝.撲滅液化天然氣火焰用生產中高膨脹泡沫和滅火粉末用泡末濃縮物的試驗
| Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
|
| BS EN 12066-1998
| 液化天然氣裝置和設備.液化天然氣蓄水池內用絕緣襯里的試驗
| Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas
|
| BS EN 12308-1998
| 液化天然氣設施和設備.用于液化天然氣管道的法蘭接頭墊圈設計適配性試驗
| Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
|
| BS EN 12567-2000
| 工業閥門.液化天然氣用隔離閥.適用性驗證試驗規范
| Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
|
| BS EN 12838-2000
| 液化天然氣設施和設備.穩定性試驗和液化天然氣取樣系統
| Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
|
| BS EN 13423-2000
| 壓縮天然氣車輛的使用
| Compressed natural gas vehicle operations
|
| BS EN 13645-2002
| 液化天然氣用設備.存儲容量5t至200t之間的港口設備的設計
| Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t
|
| BS EN 13766-2003
| 液化石油氣和液化天然氣輸送用熱塑性多層非硫化軟管和軟管組件.規范
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
|
| BS EN 13942-2003
| 石油和天然氣工業.管道輸送.管道閥
| Petroleum and natural gas industries - Pipeline transportation - Pipeline valves
|
| BS EN 14141-2003
| 天然氣輸送用管道閥.性能要求和試驗
| Valves for natural gas transportation in pipelines - Performance requirements and tests
|
| BS EN 14161-2003
| 石油和天然氣工業.管道輸送系統
| Petroleum and natural gas industries - Pipeline transportation systems
|
| BS EN 14163-2001
| 石油和天然氣工業.管道運輸系統.管道焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
|
| BS EN 1442-2006
| 液化石油天然氣(LPG)設備和附件.液化石油天然氣用可運輸?shù)牟⒖稍偬畛涞暮附愉撈?設計和構造
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
|
| BS EN 1473-2007
| 液化天然氣裝置和設備.岸上裝置的設計
| Installation and equipment for liquefied natural gas - Design of onshore installations
|
| BS EN 1474-1997
| 液化天然氣裝置和設備.裝卸臂的設計和試驗
| Installation and equipment for liquefied natural gas - Design and testing of loading/unloading arms
|
| BS EN 14870-1-2004
| 石油和天然氣工業.管道運輸系統的感應管彎頭、配件和法蘭.感應管彎頭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Induction bends
|
| BS EN 14870-2-2004
| 石油和天然氣工業.管道運輸系統的吸入管彎頭、配件和法蘭.配件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
|
| BS EN 14870-3-2006
| 石油和天然氣工業.管道運輸系統的吸入管彎頭、配件和法蘭.法蘭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
|
| BS EN 1532-1997
| 液化天然氣設施和設備.船舶與海岸之間的交接
| Installation and equipment for liquefied natural gas - Ship to shore interface
|
| BS EN 1762-2004
| 25巴(2,5MPA)以下液化石油氣(LPG)(液相或氣相)以及天然氣用橡膠軟管和軟管組件.規范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
|
| BS EN 1776-1999
| 燃?xì)夤?yīng).天然氣測量站.功能要求
| Gas supply - Natural gas measuring stations - Functional requirements
|
| BS EN ISO 10101-1-1994
| 天然氣.卡爾費舍爾法測定水含量.介紹
| Natural gas - Determination of water by the Karl Fischer method - Introduction
|
| BS EN ISO 10101-2-1994
| 天然氣.卡爾費舍爾法測定水含量.滴定法
| Natural gas - Determination of water by the Karl Fischer method - Titration procedure
|
| BS EN ISO 10101-3-1994
| 天然氣.卡爾費舍爾法測定水含量.庫侖滴定法
| Natural gas - Determination of water by the Karl Fischer method - Coulometric procedure
|
| BS EN ISO 10417-2004
| 石油和天然氣工業.井下安全閥系統.設計、安裝、操作和矯正
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
|
| BS EN ISO 10418-2003
| 石油和天然氣工業.近海生產裝置.基礎表面操作安全系統
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
| BS EN ISO 10423-2004
| 石油和天然氣工業.鉆井和開采設備.井口設施和采油樹設備(CD-ROM)
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (CD-ROM)
|
| BS EN ISO 10424-1-2004
| 石油和天然氣工業.旋轉鉆探設備.旋轉鉆桿構件
| Petroleum and natural gas industries - Rotary drilling equipment - Rotary drill stem elements
|
| BS EN ISO 10426-1-2006
| 石油和天然氣工業.固井用水泥和材料.規范
| Petroleum and natural gas industries - Cements and materials for well cementing - Specification
|
| BS EN ISO 10426-2-2004
| 石油和天然氣工業.油井固井用水泥和材料.油井用水泥的試驗
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of well cements
|
| BS EN ISO 10426-3-2003
| 石油和天然氣工業.固井用水泥和材料.深水井水泥配方的試驗
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of deepwater well cement formulations
|
| BS EN ISO 10426-4-2005
| 石油和天然氣工業.油井固井用水泥和材料.在大氣壓力下泡沫水泥漿的制備和試驗
| Petroleum and natural gas industries - Cements and materials for well cementing - Preparation and testing of foamed cement slurries at atmospheric pressure
|
| BS EN ISO 10426-5-2006
| 石油和天然氣工業.油井固井用水泥和材料.在大壓力下固井水泥加工制劑的收縮和膨脹的測定
| Petroleum and natural gas industries - Cements and materials for well cementing - Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
|
| BS EN ISO 10427-1-2002
| 石油和天然氣工業.套管扶正器.弓形彈簧套管扶正器
| Petroleum and natural gas industries - Casing centralizers - Bow-spring casing centralizers
|
| BS EN ISO 10427-2-2004
| 石油和天然氣工業.良好膠結設備.扶正器的放置和限動環的檢測
| Petroleum and natural gas industries - Equipment for well cementing - Centralizer placement and stop-collar testing
|
| BS EN ISO 10427-3-2004
| 石油和天然氣工業.固井用設備.浮動式固井設備的性能試驗
| Petroleum and natural gas industries - Equipment for well cementing - Performance testing of cementing float equipment
|
| BS EN ISO 10432-2005
| 石油和天然氣工業.下降孔設備.地下安全閥設備
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
|
| BS EN ISO 10437-2003
| 石油、石油化學和天然氣工業.專用汽輪機設備
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications
|
| BS EN ISO 10438-1-2003
| 石油、石化和天然氣工業.潤滑、油封、控油系統和輔助裝置.一般要求
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft-sealing and control-oil systems and auxiliaries - General requirements
|
| BS EN ISO 10438-2-2003
| 石油和天然氣工業.潤滑、油封、控油系統和輔助裝置.專用油系統
| Petroleum and natural gas industries - Lubrication, shaft sealing and control oil systems and auxiliaries - Special purpose oil systems
|
| BS EN ISO 10438-3-2003
| 石油、石化和天然氣工業.潤滑、油封、控油系統和輔助裝置.通用油系統
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft sealing and control oil systems and auxilliaries - General-purpose oil systems
|
| BS EN ISO 10438-4-2004
| 石油、石化和天然氣工業.潤滑、油封、控油系統和輔助裝置.自動氣封支撐系統
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft-sealing and control-oil systems and auxiliaries - Self-acting gas seal support systems
|
| BS EN ISO 10440-1-2001
| 石油和天然氣工業.旋轉型容積式壓縮機.加工壓縮機(無油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Process compressors (oil-free)
|
| BS EN ISO 10440-2-2002
| 石油和天然氣工業.旋轉型容積式壓縮機.封裝的空氣壓縮機(無油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Packaged air compressors (oil-free)
|
| BS EN ISO 10441-2007
| 石油、石化和天然氣工業.機械動力傳輸用撓性聯軸器.專用設施
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications
|
| BS EN ISO 10715-2001
| 天然氣.取樣指南
| Natural gas - Sampling guidelines
|
| BS EN ISO 10723-1996
| 天然氣.在線分析系統的性能評定
| Natural gas - Performance evaluation for on-line analytical systems
|
| BS EN ISO 11439-2000
| 氣瓶.車上貯存機動車用天然氣燃料用高壓氣瓶
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| BS EN ISO 11541-1997
| 天然氣.高壓下含水量的測定
| Natural gas - Determination of water content at high pressure
|
| BS EN ISO 11960-2005
| 石油和天然氣工業.油井套管或油管用鋼管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
| BS EN ISO 11961-1997
| 石油和天然氣工業.鉆探管用鋼管.規范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
| BS EN ISO 12213-1-1998
| 天然氣.壓縮因子的計算.導言和指導方針
| Natural gas - Calculation of compression factors - Introduction and guidelines
|
| BS EN ISO 12213-2-1998
| 天然氣.壓縮因子的計算.質量合成分析計算
| Natural gas - Calculation of compression factors - Calculation using a molar-composition analysis
|
| BS EN ISO 12213-3-1998
| 天然氣.壓縮因子的計算.物理特性計算
| Natural gas - Calculation of compression factor - Calculation using physical properties
|
| BS EN ISO 13443-1997
| 天然氣.標準參比條件
| Natural gas - Standard reference conditions
|
| BS EN ISO 13500-2006
| 石油和天然氣工業.鉆井液體材料.規范和試驗
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
|
| BS EN ISO 13501-2006
| 石油和天然氣工業.鉆井液.加工系統評估
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
| BS EN ISO 13503-1-2003
| 石油和天然氣工業.完井液和材料.完井液粘性測量
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids
|
| BS EN ISO 13503-2-2006
| 石油和天然氣工業.完井液和材料.水力壓裂和礫石填充作業用支撐劑性能測定
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
|
| BS EN ISO 13503-3-2006
| 石油和天然氣工業.完井液和材料.重鹽水試驗
| Petroleum and natural gas industries - Completion fluids and materials - Testing of heavy brines
|
| BS EN ISO 13503-4-2006
| 石油和天然氣工業.完井液和材料.在靜態條件下測量增產液和礫石填充液滲漏的程序
| Petroleum and natural gas industries - Completion fluids and materials - Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
|
| BS EN ISO 13503-5-2006
| 石油和天然氣工業.完井液和材料.測量重鹽水長期電導率方法
| Petroleum and natural gas industries - Completion fluids and materials - Procedures for measuring the long term conductivity of proppants
|
| BS EN ISO 13533-2002
| 石油和天然氣工業.鉆探和生產設備.鉆孔設備
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
|
| BS EN ISO 13534-2001
| 石油和天然氣工業.鉆＃和生產設備.提升設備的檢查、維護、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and re-manufacture of hoisting equipment
|
| BS EN ISO 13535-2001
| 石油和天然氣工業.鉆井和生產設備.提升設備
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment - Hoisting equipment
|
| BS EN ISO 13625-2003
| 石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings
|
| BS EN ISO 13626-2004
| 石油和天然氣工業.鉆井和生產設備.鉆井和油井輔助裝置
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
|
| BS EN ISO 13628-1-2005
| 石油和天然氣工業.水下采油系統的設計和操作.一般要求和建議
| Petroleum and natural gas industries - Design and operation of subsea production systems - General requirements and recommendations
|
| BS EN ISO 13628-10-2006
| 石油和天然氣工業.水下采油系統的設計和操作.連接柔性管規范
| Petroleum and natural gas industries - Design and operation of subseaprod uction systems - Specification for bonded flexible pipe
|
| BS EN ISO 13628-2-2006
| 石油和天然氣工業.海底采油系統的設計和操作.海底和海洋設備用未結合軟管系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Unbonded flexible pipe systems for subsea and marine applications
|
| BS EN ISO 13628-3-2001
| 石油和天然氣工業.水下生產系統的設計和操作.貫通流線系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Through flowline (TFL) systems
|
| BS EN ISO 13628-4-1999
| 石油和天然氣工業.水下采油系統的設計和操作.井口和采油樹設備
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea wellhead and tree equipment
|
| BS EN ISO 13628-6-2006
| 石油和天然氣工業.水下采油系統的設計和操作.水下生產控制系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea production control systems
|
| BS EN ISO 13628-7-2005
| 石油和天然氣工業.水下采油系統的設計和操作.完井/修井提升系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems
|
| BS EN ISO 13628-8-2002
| 石油和天然氣工業.水下采油系統設計和操作.水下采油系統的遙控潛水器(ROV)接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
|
| BS EN ISO 13628-9-2001
| 石油和天然氣工業.水下采油系統設計和操作.遙控設備(ROT)干涉系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems
|
| BS EN ISO 13631-2002
| 石油和天然氣工業.組合的往復式氣體壓縮機
| Petroleum and natural gas industries - Packaged reciprocating gas compressors
|
| BS EN ISO 13679-2003
| 石油和天然氣工業.套管和管連接的測試程序
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| BS EN ISO 13680-2002
| 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
| BS EN ISO 13686-1998
| 天然氣.質量指標
| Natural gas - Quality designation
|
| BS EN ISO 13691-2002
| 石油和天然氣工業.專用高速齒輪組件
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
| BS EN ISO 13702-1999
| 石油和天然氣工業.海上生產設備著火和爆炸的控制和減弱.要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
|
| BS EN ISO 13703-2001
| 石油和天然氣工業.近海生產平臺管道系統設計和安裝
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms
|
| BS EN ISO 13705-2006
| 石油、石化和天然氣工業.一般精煉廠用火加熱器
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service
|
| BS EN ISO 13706-2006
| 石油、石油化工和天然氣工業.風冷式熱交換器
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
|
| BS EN ISO 13709-2003
| 石油、石化和天然氣工業用離心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries
|
| BS EN ISO 13710-2004
| 石油、石化和天然氣工業.往復式變?nèi)菡婵毡? | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
|
| BS EN ISO 13734-2001
| 天然氣.用做增味劑的有機硫化物.要求和試驗方法
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods
|
| BS EN ISO 14224-2007
| 石油天然氣工業.設備可靠性和維修數據的采集和交換
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
|
| BS EN ISO 14310-2002
| 石油和天然氣工業.下孔設備.裝填器和沙橋卡鉆
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
|
| BS EN ISO 14532-2001
| 天然氣.詞匯
| Natural gas - Vocabulary
|
| BS EN ISO 14691-2000
| 石油和天然氣工業.機械動力傳輸用柔性接頭.一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications
|
| BS EN ISO 14692-1-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.詞匯、符號、應用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials
|
| BS EN ISO 14692-2-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.合格評定和生產
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture
|
| BS EN ISO 14692-3-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.系統設計
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design
|
| BS EN ISO 14692-4-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.制造、安裝和運行
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation
|
| BS EN ISO 14693-2004
| 石油和天然氣工業.鉆井和油井輔助設備
| Petroleum and natural gas industries - Drilling and well-servicing equipment
|
| BS EN ISO 14723-2002
| 石油和天然氣工業.管道輸送系統.海下管道閥門
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
|
| BS EN ISO 15136-1-2001
| 石油和天然氣工業的鉆孔設備.人工提升用步進式空腔泵系統.泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps
|
| BS EN ISO 15136-2-2006
| 石油和天然氣工業.人工升降機用推進式腔體泵系統.表面?zhèn)鲃?dòng)系統
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Surface drive systems
|
| BS EN ISO 15138-2001
| 石油和天然氣工業.海上開采設備.加熱、通風和空調設備
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
|
| BS EN ISO 15156-1-2002
| 石油和天然氣工業.在含有HDOWN2S的油氣生產環境中使用的材料.防裂材料選擇的一般原則
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - General principles for selection of cracking-resistant materials
|
| BS EN ISO 15156-2-2003
| 石油、石化和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.耐裂化碳和低合金鋼及鑄鐵的使用
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking resistant carbon and low alloy steels, and the use of cast irons
|
| BS EN ISO 15156-3-2003
| 石油、石化和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.耐裂化CRAs(耐腐蝕合金)和其他合金
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
|
| BS EN ISO 15546-2007
| 石油和天然氣工業.鋁合金鉆桿
| Petroleum and natural gas industries - Aluminium alloy drill pipe
|
| BS EN ISO 15547-1-2006
| 石油、石化和天然氣工業.板式熱交換器.板框式熱交換器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Plate-and-frame heat exchangers
|
| BS EN ISO 15547-2-2005
| 石油、石化和天然氣工業.板式熱交換器.銅焊鋁板熱交換器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Brazed aluminium plate-fin heat exchangers
|
| BS EN ISO 15663-1-2001
| 石油和天然氣工業.壽命周期成本計算.方法論
| Petroleum and natural gas industries - Life cycle costing - Methodology
|
| BS EN ISO 15761-2003
| 石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
|
| BS EN ISO 16070-2006
| 石油和天然氣工業.下降孔設備.鎖緊芯軸和落地螺紋接頭
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
|
| BS EN ISO 16708-2006
| 石油和天然氣工業.管道傳輸系統.基于可靠性的極限狀態法
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
|
| BS EN ISO 16812-2007
| 石油、石化和天然氣工業.殼管式熱交換器
| Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
|
| BS EN ISO 17078-1-2005
| 石油和天然氣工業.鉆井和生產設備.偏心軸
| Petroleum and natural gas industries - Drilling and production equipment - Side-pocket mandrels
|
| BS EN ISO 17776-2001
| 石油和天然氣工業.海上開采裝置.危險識別和風險評定用工具和技術導則
| Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment
|
| BS EN ISO 18453-2006
| 天然氣.水含量和水露點的相關性
| Natural gas - Correlation between water content and water dew point
|
| BS EN ISO 19739-2004
| 天然氣.用氣相色譜法測定硫化合物
| Natural gas - Determination of sulfur compounds using gas chromatography
|
| BS EN ISO 19900-2003
| 石油和天然氣工業.海上構筑物的一般要求
| Petroleum and natural gas industries - General requiremenents for offshore structures
|
| BS EN ISO 19901-1-2006
| 石油和天然氣工業.海上建筑物的特殊要求.Metocean設計和運行研究
| Petroleum and natural gas industries - Specific requirements for offshore structures - Metocean design and operating considerations
|
| BS EN ISO 19901-2-2005
| 石油和天然氣工業.近海建筑物的特殊要求.地震設計規程和標準
| Petroleum and natural gas industries - Specific requirements for offshore structures - Seismic design procedures and criteria
|
| BS EN ISO 19901-4-2003
| 石油和天然氣工業.海上建筑物特殊要求.土質和基礎設計考慮
| Petroleum and natural gas industries - Specific requirements for offshore structures - Geotechnical and foundation design considerations
|
| BS EN ISO 19901-5-2003
| 石油和天然氣工業.海上建筑物的特殊要求.工程設計和建筑中重量的控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Weight control during engineering and construction
|
| BS EN ISO 19901-7-2006
| 石油和天然氣工業.海上建筑物的特殊要求.浮動式海上建筑物和移動式海上設備的定位系統
| Petroleum and natural gas industries - Specific requirements for offshore structures - Stationkeeping systems for floating offshore structures and mobile offshore units
|
| BS EN ISO 19903-2007
| 石油和天然氣工業.海上固定混凝土結構
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
| BS EN ISO 19904-1-2006
| 石油和天然氣工業.浮式海上結構.單體船、半潛水船和船柱
| Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars
|
| BS EN ISO 21329-2004
| 石油和天然氣工業.管道運輸系統.機械連接件的試驗程序
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
|
| BS EN ISO 23251-2006
| 石油、石化和天然氣工業.壓力釋放和降壓系統
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems |
| BS EN ISO 3977-5-2002
| 燃?xì)廨啓C(jī).采購.石油和天然氣工業用設施
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
| BS EN ISO 6570-2002
| 天然氣.烴液潛在含量的測定.比重法
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods
|
| BS EN ISO 6974-1-2000
| 天然氣.用氣相色譜法測定規定的不確定度的組分.簡明分析導則
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis
|
| BS EN ISO 6974-2-2001
| 天然氣.用氣相色譜法測定規定的不確定度的組分.測量.系統特性和數據處理統計
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data
|
| BS EN ISO 6974-3-2000
| 天然氣.用氣相色譜法測定規定不確定度組分.利用兩個封裝柱進行氫、氦、氧、氮、二氧化碳和 C8 碳?xì)浠衔锏? | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium , oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
|
| BS EN ISO 6974-4-2000
| 天然氣.用氣相色譜法測定規定的不確定度組分.利用兩個封裝柱對實驗室和在線測量系統進行氮、二氧化碳和C1
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
|
| BS EN ISO 6974-5-2000
| 天然氣.用氣相色譜法測定規定的不確定度組分.利用三個封裝柱對實驗室和在線過程應用系統進行氮、二氧化碳和
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
|
| BS EN ISO 6975-1997
| 天然氣.延伸分析.氣相色譜法
| Natural gas - Extended analysis - Gas chromatographic method
|
| BS EN ISO 6978-1-2003
| 天然氣.汞的測定.用碘化學吸附法進行汞的采樣
| Natural gas - Determination of mercury - Sampling of mercury by chemisorption on iodine
|
| BS EN ISO 6978-2-2003
| 天然氣.汞的測定.用碘/鉑合金混和法采樣汞
| Natural gas - Determination of mercury - Sampling of mercury by amalgamation on gold/platinum alloy
|
| BS ISO 10414-1-2001
| 石油和天然氣工業.鉆探油液的現場試驗.水基油液
| Petroleum and natural gas industries - Field testing of drilling fluids - Water-based fluids - Part 1: Water-based fluids
|
| BS ISO 10414-2-2002
| 石油和天然氣工業.鉆井流體的現場試驗.油基的液體
| Petroleum and natural gas industries - Field testing of drilling fluids - Oil-based fluids
|
| BS ISO 10416-2002
| 石油和天然氣工業.鉆井液.實驗室試驗
| Petroleum and natural gas industries - Drilling fluids - Laboratory testing
|
| BS ISO 10425-2003
| 石油和天然氣工業用鋼絲繩.最低要求和驗收條件
| Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
|
| BS ISO 10426-3-2003
| 石油和天然氣工業.油井固井用水泥和材料.深水油井水泥成分的測試
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of deepwater well cement formulations
|
| BS ISO 12213-1-1998
| 天然氣.壓縮因數的計算.介紹和指南
| Natural gas - Calculation of compression factors - Introduction and guidelines
|
| BS ISO 12213-2-1998
| 天然氣.壓縮因數的計算.第2部分:使用摩爾成分分析法計算
| Natural gas - Calculation of compression factors - Calculation using a molar composition analysis
|
| BS ISO 12213-3-1998
| 天然氣.壓縮因數的計算.采用實測物理性能計算
| Natural gas - Calculation of compression factors - Calculation using measured physical properties
|
| BS ISO 13443-1997
| 天然氣.標準參考條件
| Natural gas - Standard reference conditions
|
| BS ISO 13501-2006
| 石油和天然氣工業.鉆井液.作業系統評估
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
| BS ISO 13503-1-2003
| 石油和天然氣工業.完井液和材料.完井液粘性的測量
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids
|
| BS ISO 13628-5-2002
| 石油和天然氣工業.海底開采系統的設計和操作.海底開采控制系統聯系纜
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals
|
| BS ISO 13628-7-2005
| 石油和天然氣工業.水下采油系統的設計和操作.完井/修井提升管系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems
|
| BS ISO 13628-8-2002
| 石油和天然氣工業.海底采油系統的設計和操作.海底開采控制系統的遙控運送裝置的接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
|
| BS ISO 13628-9-2001
| 石油和天然氣工業.海底開采系統的設計和運行.遠程操作工具(ROT)介入系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems
|
| BS ISO 13678-2001
| 石油和天然氣工業.與鑄件、管材和管道一起使用的螺紋復合物制件的評價和試驗
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
|
| BS ISO 13679-2003
| 石油和天然氣工業.套管和管道連接的檢驗規程
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| BS ISO 13691-2002
| 石油和天然氣工業.高速專用齒輪裝置
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
| BS ISO 13704-2002
| 石油和天然氣工業.煉油廠中加熱器管厚度的校準
| Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries
|
| BS ISO 13879-2000
| 石油和天然氣工業.功能規范的內容和起草
| Petroleum and natural gas industries - Content and drafting of functional specifications
|
| BS ISO 13880-2000
| 石油和天然氣工業.技術規范的內容和起草
| Petroleum and natural gas industries - Content and drafting of a technical specification
|
| BS ISO 14469-3-2006
| 道路車輛.壓縮天然氣(CNG)填充連接器.25 MPa (250 bar)連接器
| Road vehicles - Compressed natural gas (CNG) refuelling connector - 25 MPa (250 bar) connector
|
| BS ISO 14532-2001
| 天然氣,詞匯
| Natural gas - Vocabulary
|
| BS ISO 15403-2000
| 天然氣.作為車輛壓縮燃料使用的天然氣質量牌號
| Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles
|
| BS ISO 15544-2001
| 石油和天然氣工業.海上開采裝置.緊急響應的要求和指南
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response - Requirements and guidelines for emergency response
|
| BS ISO 15649-2001
| 石油和天然氣工業.管道
| Petroleum and natural gas industries - Piping
|
| BS ISO 15663-1-2001
| 石油和天然氣工業.壽命周期成本.方法學
| Petroleum and natural gas industries - Life cycle costing - Methodology
|
| BS ISO 15663-2-2001
| 石油和天然氣工業.壽命周期成本.方法論的應用和計算方法指南
| Petroleum and natural gas industries - Life cycle costing - Guidance on application of methodology and calculation methods
|
| BS ISO 15663-3-2001
| 石油和天然氣工業.生命周期成本.實施指南
| Petroleum and natural gas industries - Life cycle costing - Implementation guidelines - Part 3: Implementation guidelines
|
| BS ISO 17776-2001
| 石油和天然氣工業.近海生產裝置.危險識別和風險評估用工具和技術指南
| Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment
|
| BS ISO 19078-2007
| 儲氣瓶.機動車輛用天然氣道上燃料儲氣瓶裝置檢驗和高壓儲氣瓶的合格鑒定
| Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| BS ISO 19739-2004
| 天然氣.用氣相色譜法測定硫化合物的含量
| Natural gas - Determination of sulfur compounds using gas chromatography
|
| BS ISO 19903-2007
| 石油和天然氣工業.固定混凝土海上平臺
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
| BS ISO 19904-1-2006
| 石油和天然氣工業.漂浮海上設施.單體船、半潛水船和輕甲板船
| Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars
|
| BS ISO 23251-2006
| 石油、石化和天然氣工業.釋放壓力和解壓系統
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
|
| BS ISO 23874-2007
| 天然氣.碳?xì)浠衔锫饵c(diǎn)計算用氣相色譜法的要求
| Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation
|
| BS ISO 3977-5-2002
| 燃?xì)廨啓C(jī).采購.供石油和天然氣工業應用
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
| BS ISO 6570-2002
| 天然氣.潛在烴液含量的測定.測重法
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods
|
| BS ISO 6974-1-2000
| 天然氣.用氣相色譜法測定規定的不確定度的組分.第1部分:簡明分析導則
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis
|
| BS ISO 6974-2-2001
| 天然氣.用氣相色譜法測定規定的不確定度的組分.測量系統特性和數據處理的穩定性用定性和統計巡飭肯低廠
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data
|
| BS ISO 6974-3-2000
| 天然氣.用氣相色譜法測定規定的不確定度的組分.用兩個填充柱測定氫、氦、氧、氮、二氧化碳和達到C8的烴類
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
|
| BS ISO 6974-4-2000
| 天然氣.用氣相色譜法測定規定的不確定度的組分.第4部分:用兩柱測定實驗室和在線測量系統用的氮、二氧化碳和
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
|
| BS ISO 6974-5-2000
| 天然氣.用氣相色譜法測定規定的不確定度的組分.用三柱測定實驗室和在線處理用的氮、二氧化碳和C<下標1>到C<
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
|
| BS ISO 6974-6-2002
| 天然氣.用氣相色譜法測定具有規定不定度的成分.用三毛細管柱測定氫、氦、氧、氮、二氧化碳和CDOWN1 至 CDOW
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium , oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
|
| BS ISO 6978-1-2003
| 天然氣.汞的測定.用碘化學吸附法對汞的采樣
| Natural gas - Determination of mercury - Sampling of mercury by chemisorption on iodine
|
| BS ISO 6978-2-2003
| 天然氣.汞的測定.用金/鉑合金混汞法對汞的采樣
| Natural gas - Determination of mercury - Sampling of mercury by amalgamation on gold/platinum alloy
|
| BS ISO/TS 16922-2002
| 天然氣.添味氣體的導則
| Natural gas - Guidelines for odorizing gases
|
| PD ISO/TR 13881-2001
| 石油和天然氣工業.產品、加工和服務的分類和符合性評定
| Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services
|
| 編號 | 中文名稱 | 英文名稱 |
|---|