| 編號 | 中文名稱 | 英文名稱 |
|---|
| GB 17258-1998
| 汽車用壓縮天然氣鋼瓶
| Steel cylinders for the on-board of compressednatural gas as a fuel for vehicles
|
| GB 17820-1999
| 天然氣
| Natural gas
|
| GB 17926-1999
| 車用壓縮天然氣瓶閥
| Valves for compression natural gas cylinders for vehicles
|
| GB 18047-2000
| 車用壓縮天然氣
| Compressed natural gas as vehicle fuel
|
| GB 19158-2003
| 站用壓縮天然氣鋼瓶
| Steel cylinders for the storage of compressed natural gas
|
| GB 19533-2004
| 汽車用壓縮天然氣鋼瓶定期檢驗與評定
| Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel
|
| GB/T 11060.1-1998
| 天然氣中硫化氫含量的測定碘量法
| Natural gas--Determination of hydrogen sulfide content--Iodometric titration method
|
| GB/T 11060.2-1998
| 天然氣中硫化氫含量的測定亞甲藍法
| Natural gas--Determination of hydrogen sulfide content--Methylene blue method
|
| GB/T 11061-1997
| 天然氣中總硫量的測定氧化微庫侖法
| Natural gas--Determination of sulfur--Oxidative microculometry method
|
| GB/T 11062-1998
| 天然氣發熱量、密度、相對密度和沃泊指數的計算方法
| Natural gas--Calculation of calorific values，density，relative density and Wobbe index from composition
|
| GB/T 12234-2007
| 石油、天然氣工業用螺柱連接閥蓋的鋼制閘閥
| Bolted bonnet steel gate valves for petroleum and natural gas industries
|
| GB/T 13609-1999
| 天然氣取樣導則
| Natural Gas--Sampling guidelines
|
| GB/T 13610-2003
| 天然氣的組成分析氣相色譜法
| Analysis of natural gas by gas chromatography
|
| GB/T 14164-2005
| 石油天然氣輸送管用熱軋寬鋼帶
| Hot-rolled wide strips for line pipe of petroleum and natrual gas
|
| GB/T 16781.1-1997
| 天然氣中汞含量的測定原子吸收光譜法
| Natural gas--Determination of mercury--Atomic absorption spectrometry
|
| GB/T 16781.2-1997
| 天然氣中汞含量的測定冷原子熒光分光光度法
| Natural gas--Determination of mercury--Cold atomic fluorescent spectrophotometry
|
| GB/T 16783.1-2006
| 石油天然氣工業 鉆井液現場測試 第1部分： 水基鉆井液
| Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
|
| GB/T 17281-1998
| 天然氣中丁烷至十六烷烴類的測定氣相色譜法
| Natural gas--Determination of hydrocarbons from butane(C4) to hexadecane(C16)--Gas chromato-graphic method
|
| GB/T 17283-1998
| 天然氣水露點的測定冷卻鏡面凝析濕度計法
| Determination of the water dew point of natural gas--Cooled surface condensation hygrometers
|
| GB/T 17676-1999
| 天然氣汽車和液化石油氣汽車標志
| Natural gas vehicle and liquefied petroleumgas vehicle--Identification marks
|
| GB/T 17745-1999
| 石油天然氣工業套管和油管的維護及使用
| Petroleum and natural gas industries--Care and use of casing and tubing
|
| GB/T 17747.1-1999
| 天然氣壓縮因子的計算第1部分:導論和指南
| Natural gas--Calculation of compression factor--Part 1:Introduction and guidelines
|
| GB/T 17747.2-1999
| 天然氣壓縮因子的計算第2部分:用摩爾組成進行計算
| Natural gas--Calculation of compression factor--Part 2:Calculation using molar-composition analysis
|
| GB/T 17747.3-1999
| 天然氣壓縮因子的計算第3部分:用物性值進行計算
| Natural gas--Calculation of compression factor--Part 3:Calculation using physical properties
|
| GB/T 17895-1999
| 天然氣汽車和液化石油氣汽車詞匯
| Natural gas vehicle and liquefied petroleum gas vehicle--Vocabulary
|
| GB/T 18363-2001
| 汽車用壓縮天然氣加氣口
| Filling receptacle of CNG vehicle
|
| GB/T 18437.1-2001
| 燃?xì)馄?chē)改裝技術要求壓縮天然氣汽車
| The technical criterion of refitting for vehicle by using gas--Compressed natural gas for vehicle(CNGV)
|
| GB/T 18603-2001
| 天然氣計量系統技術要求
| Technical requirements of measuring systems fornatural gas
|
| GB/T 18604-2001
| 用氣體超聲流量計測量天然氣流量
| Measurement of natural gas flow by ultrasonic flow meter
|
| GB/T 18605.1-2001
| 天然氣中硫化氫含量的測定第1部分:醋酸鉛反應速率雙光路檢測法
| Natural gas--Determination of hydrogen sulfide content--Part 1:Lead acetate reaction ratedual photo path method
|
| GB/T 18605.2-2001
| 天然氣中硫化氫含量的測定第2部分:醋酸鉛反應速率單光路檢測法
| Natural gas--Determination of hydrogen sulfide content--Part 2:Lead acetate reaction ratesingle photo path method
|
| GB/T 18619.1-2002
| 天然氣中水含量的測定卡爾費休法-庫侖法
| Natural gas--Determination ofwater by the Karl fischer method--Coulometric procedure
|
| GB/T 18975.1-2003
| 工業自動化系統與集成流程工廠(包括石油和天然氣生產設施)生命周期數據集成第1部分:綜述與基本原理
| Industrial automation systems and integration--Integration of life-cycle data for process plants including oil and gas production facilities--Part 1: Overview and fundamental principles
|
| GB/T 19190-2003
| 石油天然氣工業鉆井和采油提升設備
| Petroleum and natural gas industries--Drilling and production equipment--Hoisting equipment
|
| GB/T 19204-2003
| 液化天然氣的一般特性
| General characteristics of liquefied natural gas
|
| GB/T 19205-2003
| 天然氣標準參比條件
| Natural gas--Standard reference conditions
|
| GB/T 19206-2003
| 天然氣用有機硫化合物加臭劑的要求和測試方法
| Natural gas--Organic sulfurcompounds used as odorants--Requirements and test methods
|
| GB/T 19207-2003
| 天然氣中總硫的測定氫解-速率計比色法
| Natural gas--Determination of total sulfur content--Hydrogenolysis and rateometric colorimetry method
|
| GB/T 19236-2003
| 壓縮天然氣加氣機加氣槍
| Fueling nozzle for CNG dispenser
|
| GB/T 19237-2003
| 汽車用壓縮天然氣加氣機
| Compressed natural gas dispenser for vehicle
|
| GB/T 19240-2003
| 壓縮天然氣汽車專用裝置的安裝要求
| Mounting requirements of special equipment for compressed natural gas vehicles
|
| GB/T 19492-2004
| 石油天然氣資源/儲量分類
| Classifications for petroleum resources/reserves
|
| GB/T 19829.1-2005
| 石油天然氣工業壽命周期費用分析第1部分:方法論
| Petroleum and natural gas industries-Life cycle costing-Part 1:Methodology
|
| GB/T 19829.2-2005
| 石油天然氣工業壽命周期費用分析第2部分:方法論和計算方法應用指南
| Petroleum and natural gas industries-Life cycle costing-Part 2:Guidance on application of methodology and calculation methods
|
| GB/T 19829.3-2006
| 石油天然氣工業壽命周期費用分析第3部分：實施指南
| Petroleum and natural gas industries - Life cycle costing - Part 3: Implementation guidelines
|
| GB/T 19830-2005
| 石油天然氣工業油氣井套管或油管用鋼管
| Petroleum and natural gas industries-Steel pipes for use as casing or tubing for wells
|
| GB/T 19831.1-2005
| 石油天然氣工業套管扶正器第1部分弓形彈簧套管扶正器
| Petroleum and natural gas industries-Casing centralizers-Part 1:Bow-spring casing centralizers
|
| GB/T 19832-2005
| 石油天然氣工業鉆井和采油提升設備的檢驗、維護、修理和改造
| Petroleum and natural gas industries-Drilling and production equipment-Inspection,maintenance,repair and remanufacture of hoisting equipment
|
| GB/T 20172-2006
| 石油天然氣工業設備可靠性和維修數據的采集與交換
| Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
|
| GB/T 20173-2006
| 石油天然氣工業管道輸送系統管道閥門
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
|
| GB/T 20174-2006
| 石油天然氣工業鉆井和采油設備鉆通設備
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
|
| GB/T 20322-2006
| 石油及天然氣工業用往復壓縮機
| Petroleum and natural gas industries - Reciprocating compressors
|
| GB/T 20368-2006
| 液化天然氣（LNG) 生產、儲存和裝運
| Production,storage and handling of Liquefied Natural Gas (LNG)
|
| GB/T 20603-2006
| 冷凍輕烴流體 液化天然氣的取樣 連續法
| Refrigerated light hydrocarbon fluids - Sampling of liquefied natural gas - Continuous method
|
| GB/T 20604-2006
| 天然氣詞匯
| Natural gas - Vocabulary
|
| GB/T 20656-2006
| 石油天然氣工業 新套管、油管和平端鉆桿現場檢驗
| Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
|
| GB/T 20657-2006
| 石油天然氣工業 套管、油管、鉆桿和管線管性能公式及計算
| Petroleum and natural gas industries - formulae and calculation for casing, tubing, drill pipe and line pipe properties
|
| GB/T 20659-2006
| 石油天然氣工業 鋁合金鉆桿
| Petroleum and natural gas industries - Aluminium alloy drill pipe
|
| GB/T 20660-2006
| 石油天然氣工業 海上生產設施火災、爆炸的控制和削減措施 要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
|
| GB/T 20661-2006
| 石油和天然氣工業 用于海底和海洋立管的撓性管系統
| Petroleum and natural gas industries - Flexible pipe systems for subsea and marine riser applications
|
| GB/T 20662-2006
| 石油天然氣工業 產品、過程和服務的分級與合格評定
| Petroleum and natural gas industries - Classification and conformity assessment of products processes and services
|
| GB/T 20734-2006
| 液化天然氣汽車專用裝置安裝要求
| Mounting requirements for liquefied natural gas vehicle special equipment
|
| GB/T 20735-2006
| 汽車用壓縮天然氣減壓調節器
| pressure regulator of CNG vehicles
|
| GB/T 20970-2007
| 石油天然氣工業 井下工具 封隔器和橋塞
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
|
| GB/T 20971-2007
| 石油天然氣工業 固井設備 注水泥浮動裝置性能測試
| Petroleum and natural gas industries - Equipment for well cementing - Performance testing of cementing float equipment
|
| GB/T 20972.1-2007
| 石油天然氣工業 油氣開采中用于含硫化氫環境的材料 第1部分：選擇抗裂紋材料的一般原則
| Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General principles for selection of cracking-resistant materials
|
| GB/T 21068-2007
| 液化天然氣密度計算模型規范
| Standard specification for LNG density calculation models
|
| GB/T 21069-2007
| 天然氣 高壓下水含量的測定
| Natural gas - Determination of water content at high pressure
|
| GB/T 21237-2007
| 石油天然氣輸送管用寬厚鋼板
| Wide and heavy plates for line pipe of petroleum and natural gas
|
| GB/T 21267-2007
| 石油天然氣工業 套管及油管螺紋連接試驗程序
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| GB/T 21391-2008
| 用氣體渦輪流量計測量天然氣流量
| ()
|
| GB/T 21410-2008
| 石油天然氣工業 井下工具 鎖定心軸與定位接頭
| ()
|
| GB/T 21411.1-2008
| 石油天然氣工業井下設備 人工舉升用螺桿泵系統 第1部分: 泵
| ()
|
| GB/T 21412.4-2008
| 石油天然氣工業 水下生產系統的設計與操作 第4部分：水下井口裝置和采油樹設備
| ()
|
| GB/T 21445.2-2008
| 石油天然氣工業 海底生產系統的設計和操作 第2部分：用于海底和海上的撓性管系統
| ()
|
| GB/T 21446-2008
| 用標準孔板流量計測量天然氣流量
| ()
|
| GB/T 3215-2007
| 石油、重化學和天然氣工業用離心泵
| centrifugal pumps for petroleum petrochemical and natural gas industries
|
| GB/T 9253.2-1999
| 石油天然氣工業套管、油管和管線管螺紋的加工、測量和檢驗
| Petroleum andnatural gas industries--Threading，gauging，and threadinspection of casing，tubing and line pipe threads
|
| GB/T 9711.1-1997
| 石油天然氣工業輸送鋼管交貨技術條件第1部分:A級鋼管
| Petroleum and natural gas industries--Steel pipe for pipelines--Technical delivery conditions--Part 1:Pipes of requirements class A
|
| GB/T 9711.2-1999
| 石油天然氣工業輸送鋼管交貨技術條件第2部分:B級鋼管
| Petroleum and natural gas industries--Steel pipe for pipelines--Technical delivery conditions--Part 2:Pipes of requirement class B
|
| GB/T 9711.3-2005
| 石油天然氣工業輸送鋼管交貨技術條件第3部分:C級鋼管
| Petroleum and natural gas industries-Steel pipe for pipelines-Technical delivery conditions-Part 3:Pipes of requirements class C
|
| HG 2273.1-2004
| 天然氣一段轉化催化劑
| ()
|
| HG 2273.2-2004
| 天然氣二段轉化催化劑
| ()
|
| HG 2273.3-2004
| 天然氣二段轉化熱保護劑
| ()
|
| HG/T 2273.4-1994
| 天然氣一、二段轉化催化劑試驗方法
| ()
|
| HG/T 2273.4-2006
| 天然氣一、二段轉化催化劑試驗方法
| Test method of natural gas reforming catalyst for primary and secondary reformer
|
| HG/T 3543-2006
| 天然氣轉化催化劑化學成份分析方法
| Analytical method of chemical composition in natural gas reforming catalyst
|
| JB/T 10298-2001
| 汽車加氣站用天然氣壓縮機
| ()
|
| JB/T 4780-2002
| 液化天然氣罐式集裝箱
| ()
|
| JB/T 5297-1991
| 石油工業用容積式天然氣壓縮機 基本參數
| ()
|
| JB/T 7551-1994
| 天然氣分離與液化設備術語
| ()
|
| JB/T 9078.1-1999
| 天然氣分離設備 技術條件
| ()
|
| JB/T 9078.2-1999
| 天然氣分離設備 性能試驗方法
| ()
|
| QC/T 257-1998(2005)
| 壓縮天然氣汽車定型試驗規程
| ()
|
| QC/T 674-2007
| 汽車用壓縮天然氣電磁閥
| Solenoid valve of CNG vehicles
|
| QC/T 691-2002
| 車用天然氣單燃料發動機技術條件
| ()
|
| QC/T 692-2002
| 汽油/天然氣兩用燃料發動機技術條件
| ()
|
| QC/T 694-2002
| 柴油/壓縮天然氣雙燃料發動機技術條件
| ()
|
| QC/T 746-2006
| 壓縮天然氣汽車高壓管路
| High pressure pipelines for compressed natural vehicles
|
| QC/T 754-2006
| 液化天然氣汽車定型試驗規程
| Specifications for liquefied natural gas vehicle
|
| QC/T 755-2006
| 液化天然氣(LNG)汽車專用裝置技術條件
| Technologe requirements of special equipment for LNG vehicle
|
| SY 0092-1998
| 汽車用壓縮天然氣加氣站設計規范
| ()
|
| SY 0402-2000
| 石油天然氣站內工藝管道工程施工及驗收規范
| ()
|
| SY 0466-1997
| 天然氣集輸管道施工及驗收規范
| ()
|
| SY 0466-1997(2005)
| 天然氣集輸管道施工及驗收規范
| ()
|
| SY 0470-2000
| 石油天然氣管道跨越工程施工及驗收規范
| ()
|
| SY 4200-2007
| 石油天然氣建設工程施工質量驗收規范 通則
| Code for quality acceptance of oil and gas construction engineering General rule
|
| SY 4201.1-2007
| 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第1部分：機泵類設備
| Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 1:Mechanism and pump device
|
| SY 4201.2-2007
| 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第2部分：塔類設備
| Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 2:Tower device
|
| SY 4201.3-2007
| 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第3部分：容器類設備
| Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 3:Container equipments
|
| SY 4201.4-2007
| 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第4部分：爐類設備
| Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 4:Boiler device
|
| SY 4202-2007
| 石油天然氣建設工程施工質量驗收規范 儲罐工程
| Code for quality acceptance of oil and gas construction engineering storage tank project
|
| SY 4203-2007
| 石油天然氣建設工程施工質量驗收規范 站內工藝管道工程
| Code for quality acceptance of oil and gas construction engineering station procedure pipeline project
|
| SY 4204-2007
| 石油天然氣建設工程施工質量驗收規范 油氣田集輸管道工程
| Code for quality acceptance of oil and gas construction engineering oil-gas field gathering and transportation pipeline engineering
|
| SY 4205-2007
| 石油天然氣建設工程施工質量驗收規范 自動化儀表工程
| Code for quality acceptance of oil and gas construction engineering automation instrumentation engineering
|
| SY 4206-2007
| 石油天然氣建設工程施工質量驗收規范 電氣工程
| Code for quality acceptance of oil and gas construction engineering
|
| SY 4207-2007
| 石油天然氣建設工程施工質量驗收規范 管道穿跨越工程
| Code for quality acceptance of oil and gas construction engineering pipeline crossing and aerial crossing engineering
|
| SY 5742-2007
| 石油與天然氣井井控安全技術考核管理規則
| Assessment specification for petroleum and gas well control safety technologies
|
| SY 5853-1993
| 石油工業車用壓縮天然氣氣瓶安全管理規定
| ()
|
| SY 6186-2007
| 石油天然氣管道安全規程
| Safety specification for crude oil & natural gas pipelines
|
| SY 6355-1998
| 石油天然氣生產專用安全標志
| ()
|
| SY/T 0003-2003
| 石油天然氣工程制圖標準
| ()
|
| SY/T 0011-2007
| 天然氣凈化廠設計規范
| Code for design of natural gas conditioning plant
|
| SY/T 0015.1-1998(2006年確認)
| 原油和天然氣輸送管道穿跨越工程設計規范 穿越工程
| ()
|
| SY/T 0015.2-1998(2006年確認)
| 原油和天然氣輸送管道穿跨越工程設計規范 跨越工程
| ()
|
| SY/T 0076-2003
| 天然氣脫設計規范
| ()
|
| SY/T 0077-2003
| 天然氣凝液回收設計規范
| ()
|
| SY/T 0082.1-2006
| 石油天然氣工程初步設計內容規范 第1部分：油氣田地面工程
| Code for preliminary design of petroleum & natural gas engineering oil & gas field surface engineering
|
| SY/T 0327-2003
| 石油天然氣鋼質管道對接環焊縫全自動超聲波檢測
| ()
|
| SY/T 0452-2002
| 石油天然氣金屬管道焊接工藝評定
| ()
|
| SY/T 0460-2000
| 天然氣凈化裝置設備與管道安裝工程施工及驗收規范
| ()
|
| SY/T 0599-2006
| 天然氣地面設施抗硫化物應力開裂和抗應力腐蝕開裂的金屬材料要求
| Metallic material requirements-Resistance to sulfide stress cracking and stress corrosion cracking for gas surface equipment
|
| SY/T 0602-2005
| 甘醇型天然氣脫水裝置規范
| ()
|
| SY/T 11-1996
| 氣田天然氣凈化廠設計規范
| ()
|
| SY/T 4079-1995
| 石油天然氣管道穿越工程施工及驗收規范
| ()
|
| SY/T 4109-2005
| 石油天然氣鋼質管道無損檢測
| ()
|
| SY/T 4111-2007
| 天然氣壓縮機（組）安裝工程施工技術規范
| Code for construction specification of natural gas compressor set installation
|
| SY/T 4112-2007
| 石油天然氣鋼質管道對接環焊縫全自動超聲波檢測試塊
| Mechanized ultrasonic examination block of girth butt welds in oil ang gas steel pipeline
|
| SY/T 5030-2006
| 石油天然氣工業用柴油機
| The diesel engine for the petroleum and natrual gas industry
|
| SY/T 5170-1998(2005)
| 石油天然氣工業用鋼絲繩規范
| ()
|
| SY/T 5225-2005
| 石油天然氣鉆井、開發、儲運防火防爆安全生產技術規程
| ()
|
| SY/T 5238-1991(2005)
| 天然氣中氫碳氧同位素制樣方法
| ()
|
| SY/T 5398-1991(2007)
| 原油天然氣和穩定輕烴交接計量站計量器具配備規范
| ()
|
| SY/T 5517-1992(2007)
| 野外石油天然氣地質調查規范
| ()
|
| SY/T 5615-2004
| 石油天然氣地質編圖規范及圖式
| ()
|
| SY/T 5719-2006
| 天然氣凝液安全規范
| Safety prescription for gas liquids
|
| SY/T 5752-1996
| 石油及天然氣探井信息代碼
| ()
|
| SY/T 5922-2003
| 天然氣管道運行規范
| ()
|
| SY/T 5979-1994(2007)
| 石油天然氣藏（田）命名規定
| ()
|
| SY/T 6137-2005
| 含硫化氫的油氣生產和天然氣處理裝置作業推薦作法
| ()
|
| SY/T 6143-2004
| 用標準孔板流量計測量天然氣流量
| ()
|
| SY/T 6161-1995
| 天然氣層測井解釋規程
| ()
|
| SY/T 6186-1996
| 石油天然氣管道安全規程
| ()
|
| SY/T 6194-2003
| 石油天然氣工業 油氣井套管或油管用鋼管
| ()
|
| SY/T 6230-1997(2005)
| 石油天然氣加工 工藝危害管理
| ()
|
| SY/T 6233-2002
| 天然氣管道試運投產規范
| ()
|
| SY/T 6276-1997(2005)
| 石油天然氣工業 健康、安全與環境管理體系
| ()
|
| SY/T 6283-1997(2005)
| 石油天然氣鉆井健康、安全與環境管理體系指南
| ()
|
| SY/T 6328-1997(2005)
| 石油天然氣工業-套管、油管、鉆桿和管線管性能計算
| ()
|
| SY/T 6362-1998(2007)
| 石油天然氣井下作業健康、安全與環境管理體系
| ()
|
| SY/T 6423.1-1999(2007)
| 石油天然氣工業 承壓鋼管無損檢測方法 埋弧焊鋼管焊縫缺欠的射線檢測
| ()
|
| SY/T 6423.2-1999(2007)
| 石油天然氣工業 承壓鋼管無損檢測方法 電阻焊和感應焊鋼管焊縫縱向缺欠的超聲波檢測
| ()
|
| SY/T 6423.3-1999(2007)
| 石油天然氣工業 承壓鋼管無損檢測方法 埋弧焊鋼管焊縫縱向和/或橫向缺欠的超聲波檢測
| ()
|
| SY/T 6423.4-1999(2007)
| 石油天然氣工業 承壓鋼管無損檢測方法 焊接鋼管焊縫附近分層缺欠的超聲波檢測
| ()
|
| SY/T 6423.5-1999(2007)
| 石油天然氣工業 承壓鋼管無損檢測方法 焊接鋼管制造用鋼帶/鋼板分層缺欠的超聲波檢測
| ()
|
| SY/T 6423.6-1999(2007)
| 石油天然氣工業 承壓鋼管無損檢測方法 無縫和焊接（埋弧焊除外）鋼管分層缺欠的超聲波檢測
| ()
|
| SY/T 6423.7-1999(2007)
| 石油天然氣工業 承壓鋼管無損檢測方法 無縫和焊接鋼管管端分層缺欠的超聲波檢測
| ()
|
| SY/T 6537-2002
| 天然氣凈化廠氣體及溶液分析方法
| ()
|
| SY/T 6567-2003
| 天然氣輸送管道系統節能經濟運行規范
| ()
|
| SY/T 6580-2003
| 石油天然氣勘探開發常用量和單位
| ()
|
| SY/T 6583-2003
| 石油天然氣探明儲量報告編制細則
| ()
|
| SY/T 6612-2005
| 石油天然氣探明儲量報告附圖表內容與格式
| ()
|
| SY/T 6628-2005
| 陸上石油天然氣生產環境保護推薦作法
| ()
|
| SY/T 6638-2005
| 天然氣長輸管道和地下儲氣庫工程設計節能技術規范
| ()
|
| SY/T 6650-2006
| 石油、化學和天然氣工業用往復式壓縮機
| Reciprocating compressors for petroleum,chemical and gas industry services
|
| SY/T 6651-2006
| 石油、化學和天然氣工業用軸流和離心壓縮機及膨脹機 壓縮機
| Axial and centrifugal compressors and expander-compressors for petroleum,chemical and gas industry services
|
| SY/T 6658-2006
| 用旋進旋渦流量計測量天然氣流量
| Measurement of Natural Gas Flow by Vortex Precession Meter
|
| SY/T 6659-2006
| 用科里奧利質量流量計測量天然氣流量
| Measurement of Natural Gas by Coriolis Meter
|
| SY/T 6660-2006
| 用旋轉容積式氣體流量計測量天然氣流量
| Measurement of natural Gas flow by Rotary displacement gas meters
|
| SY/T 6662-2006
| 石油天然氣工業用鋼骨架增強聚乙烯復合管
| Steel skeleton reinforced polythene composite pipes for petroleum and natural gas industry
|
| SY/T 6666-2006
| 石油天然氣工業用鋼絲繩的選用和維護的推薦作法
| Recommended practice on application, Care,and use of wire rope for petroleum & natural gas industry service
|
| SY/T 6672-2006
| 天然氣處理廠保護環境的推薦作法
| Natural gas processing plant recommended practices for protection of the environment
|
| SY/T 7506-1996
| 天然氣中二氧化碳含量的測定 氫氧化鋇法
| ()
|
| SY/T 7507-1997(2005)
| 天然氣中水含量的測定 電解法
| ()
|
| 編號 | 中文名稱 | 英文名稱 |
|---|