| 編號 | 中文名稱 | 英文名稱 |
|---|
| ISO 10101-1-1993
| 天然氣.卡爾.菲舍爾法測定水.第1部分:前言
| Natural gas; determination of water by the Karl Fischer method; part 1: introduction
|
| ISO 10101-2-1993
| 天然氣 卡爾·費休法測定天然氣中的水 第2部分:滴定法
| Natural gas; determination of water by the Karl Fischer method; part 2: titration procedure
|
| ISO 10101-3-1993
| 天然氣 卡爾·費休法測定天然氣中的水 第3部分:庫侖法
| Natural gas; determination of water by the Karl Fischer method; part 3: coulometric procedure
|
| ISO 10400-1993
| 石油和天然氣工業 套管、油管、鉆桿和管線管性能公式與計算
| Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe and line pipe properties
|
| ISO 10405-2000
| 石油和天然氣工業 套管和油管的維護和使用
| Petroleum and natural gas industries - Care and use of casing and tubing
|
| ISO 10407-1993
| 石油和天然氣工業 鉆井和生產設備 鉆柱設計和操作極限
| Petroleum and natural gas industries; drilling and production equipment; drill stem design and operating limits
|
| ISO 10414-1-2001
| 石油和天然氣工業 鉆探油液的現場試驗 第1部分：水基油液
| Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
|
| ISO 10414-2-2002
| 石油和天然氣工業.鉆井液的現場試驗.第2部分:以油為基礎的液體
| Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids
|
| ISO 10416-2002
| 石油和天然氣工業.鉆用沖洗液.實驗室試驗
| Petroleum and natural gas industries - Drilling fluids - Laboratory testing
|
| ISO 10417-2004
| 石油和天然氣工業.井下安全閥系統.設計、安裝、操作和修整
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
|
| ISO 10418-2003
| 石油和天然氣工業.近海生產裝置.基礎表面操作安全系統
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
| ISO 10423-2003
| 石油和天然氣工業.鉆井和開采設備.井口設施和采油樹設備
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment
|
| ISO 10424-1-2004
| 石油和天然氣工業.旋轉鉆孔設備.第1部分:旋轉鉆桿構件
| Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements
|
| ISO 10425-2003
| 石油和天然氣工業用鋼絲繩.最低要求和驗收條件
| Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
|
| ISO 10426-1-2005
| 石油和天然氣工業.油井固井用水泥和材料.第1部分:規范
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification
|
| ISO 10426-2 AMD 1-2005
| 石油和天然氣工業.油井固井用水泥和材料.第2部分:油井用水泥的試驗.修改件1:親水性試驗
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements; Amendment 1: Water-wetting capability testing
|
| ISO 10426-2 Technical Corrigendum 1-2006
| 石油和天然氣工業.油井固井用水泥和材料.第2部分:油井用水泥測試
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements
|
| ISO 10426-2-2003
| 石油和天然氣工業.油井固井用水泥和材料.第2部分:油井用水泥的試驗
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements
|
| ISO 10426-3-2003
| 石油和天然氣工業.油井固井用水泥和材料.第3部分:深水油井水泥成分的測試
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations
|
| ISO 10426-4-2004
| 石油和天然氣工業.油井固井用水泥和材料.第4部分:在大氣壓力下泡沫水泥漿的制備和檢驗
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure
|
| ISO 10426-5-2004
| 石油和天然氣工業.油井固井用水泥和材料.第5部分:在大氣壓力下固井水泥加工制劑的收縮和膨脹的測定
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
|
| ISO 10427-1-2001
| 石油和天然氣工業 套管扶正器 第1部分：弓性彈簧套管扶正器
| Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers
|
| ISO 10427-2-2004
| 石油和天然氣工業.固井用設備.第2部分:扶正器的放置和限動環的檢測
| Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing
|
| ISO 10427-3-2003
| 石油和天然氣工業.固井用設備.第3部分:固井浮動設備的性能試驗
| Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment
|
| ISO 10428-1993
| 石油和天然氣工業 抽油桿(抽油桿短節 光桿 接箍和變徑接箍) 規范
| Petroleum and natural gas industries; sucker rods (pony-rods, polished rods, couplings and sub-couplings); specification
|
| ISO 10431-1993
| 石油和天然氣工業 抽油機 規范
| Petroleum and natural gas industries; pumping units; specification |
| ISO 10432-2004
| 石油和天然氣工業.下降孔設備.地下安全閥設備
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
|
| ISO 10437-2003
| 石油、石油化學和天然氣工業.專用汽輪機設備
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications
|
| ISO 10438-1-2003
| 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第1部分:一般要求
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements
|
| ISO 10438-2-2003
| 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第2部分:專用油系統
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems
|
| ISO 10438-3-2003
| 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第3部分:通用油系統
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems
|
| ISO 10438-4-2003
| 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第4部分:自動氣封支撐系統
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems
|
| ISO 10440-1-2007
| 石油、石化和天然氣工業.旋轉型容積式壓縮機.第1部分:加工壓縮機
| Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors
|
| ISO 10440-2-2001
| 石油和天然氣工業 旋轉型容積式壓縮機 第2部分：封裝的空氣壓縮機（無油）
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free)
|
| ISO 10441-2007
| 石油、石化和天然氣工業.機械動力傳輸用撓性聯軸節.特殊應用
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications
|
| ISO 10715-1997
| 天然氣 取樣指南
| Natural gas - Sampling guidelines
|
| ISO 10723 Technical Corrigendum 1-1998
| 天然氣 在線分析系統的性能評定 技術勘誤1
| Natural gas - Performance evaluation for on-line analytical systems; Technical Corrigendum 1
|
| ISO 10723-1995
| 天然氣 在線分析系統的性能評定
| Natural gas - Performance evaluation for on-line analytical systems
|
| ISO 11439-2000
| 氣瓶 車上貯存機動車用天然氣燃料用高壓氣瓶
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| ISO 11541-1997
| 天然氣 高壓下含水量的測定
| Natural gas - Determination of water content at high pressure
|
| ISO 11960 Technical Corrigendum 1-2006
| 石油和天然氣工業.油井套管或油管用鋼管.技術勘誤1
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1
|
| ISO 11960-2004
| 石油和天然氣工業.油井套管和油管用鋼管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
| ISO 11961-1996
| 石油和天然氣工業 鉆井桿用鋼管 規范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
| ISO 12213-1-2006
| 天然氣.壓縮因子的計算.第1部分:介紹和指南
| Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
|
| ISO 12213-2-2006
| 天然氣.計算壓縮因子.第2部分:利用摩爾成分分析計算
| Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis
|
| ISO 12213-3-2006
| 天然氣.壓縮因子計算.第3部分:利用物理特性計算
| Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
|
| ISO 13398-1997
| 冷凍輕烴液 液化天然氣 船上輸油監測方法
| Refrigerated light hydrocarbon fluids - Liquefied natural gas - Procedure for custody transfer on board ship
|
| ISO 13443 Technical Corrigendum 1-1997
| 天然氣.標準參比條件.技術勘誤1
| Natural gas - Standard reference conditions; Technical Corrigendum 1
|
| ISO 13443-1996
| 天然氣 標準參比條件
| Natural gas - Standard reference conditions
|
| ISO 13500-2006
| 石油和天然氣工業.鉆井液體材料.規范和測試
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
|
| ISO 13501-2005
| 石油和天然氣工業.鉆井液.加工系統評價
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
| ISO 13503-1 Technical Corrigendum 1-2005
| 石油和天然氣工業.完井液和材料.第1部分:完井液粘性測量.技術勘誤1
| Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids; Technical Corrigendum 1
|
| ISO 13503-1-2003
| 石油和天然氣工業.完井液和材料.第1部分:完井液粘著特性的測量
| Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids
|
| ISO 13503-2-2006
| 石油和天然氣工業.完井液和材料.第2部分:高壓水砂破裂法和礫石包裝作業用支撐劑性能測定
| Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
|
| ISO 13503-3 Technical Corrigendum 1-2006
| 石油和天然氣工業.完井液和材料.第3部分:重鹽水的試驗.技術勘誤1
| Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines; Technical Corrigendum 1
|
| ISO 13503-3-2005
| 石油和天然氣工業.完井液和材料.第3部分:重鹽水的試驗
| Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines
|
| ISO 13503-4-2006
| 石油和天然氣工業.完井液和材料.第4部分:在靜態條件下測量外部碰擊和砂礫包裝液體泄露程序
| Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
|
| ISO 13503-5-2006
| 石油和天然氣工業.完井液和材料.第5部分：測量重鹽水長期電導率程序.技術勘誤1
| Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants
|
| ISO 13533 Technical Corrigendum 1-2005
| 石油和天然氣工業.鉆井和生產設備.鉆通設備.技術勘誤1
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment; Technical Corrigendum 1
|
| ISO 13533-2001
| 石油和天然氣工業 鉆井和生產設備 鉆井設備
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
|
| ISO 13534-2000
| 石油和天然氣工業 鉆井和生產設備 提升設備的檢查、維護、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment
|
| ISO 13535-2000
| 石油和天然氣工業 鉆井和生產設備 提升設備
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment
|
| ISO 13623-2000
| 石油和天然氣工業.管道輸送系統
| Petroleum and natural gas industries - Pipeline transportation systems
|
| ISO 13625-2002
| 石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings
|
| ISO 13626-2003
| 石油和天然氣工業.鉆井和生產設備.鉆井和井檢修結構
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
|
| ISO 13628-10-2005
| 石油和天然氣工業.水下采油系統的設計和操作.第10部分:連接柔性管規范
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
|
| ISO 13628-11-2007
| 石油和天然氣工業.水底生產系統的設計和運行.第11部分:海底和海上設備用軟管系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications
|
| ISO 13628-2-2006
| 石油和天然氣工業.水下采油系統的設計和操作.第2部分:海底和海洋設備用游離軟管系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications
|
| ISO 13628-3-2000
| 石油和天然氣工業 水下采油系統的設計和操作 第3部分:通流線系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowtime (TFL) systems
|
| ISO 13628-4-1999
| 石油和天然氣工業 水下采油系統的設計和操作 第4部分:井口和采油樹設備
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
|
| ISO 13628-5-2002
| 石油和天然氣工業.水下采油系統的設計和操作.第5部分:水下纜線和管道
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
|
| ISO 13628-6-2006
| 石油和天然氣工業.水下采油系統的設計和操作.第6部分:水下生產控制系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems
|
| ISO 13628-7-2005
| 石油和天然氣工業.水下采油系統的設計和操作.第7部分:完井/修井提升管系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
|
| ISO 13628-8 Technical Corrigendum 1-2005
| 石油和天然氣工業.水下生產系統的設計和操作.第8部分:水下生產系統上的遙控運載工具接口.技術勘誤1
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems; Technical Corrigendum 1
|
| ISO 13628-8-2002
| 石油和天然氣工業.水下生產系統的設計和操作.第8部分:水下生產系統上的遙控運載工具接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
|
| ISO 13628-9-2000
| 石油和天然氣工業 水下采油系統的設計和操作 第9部分:遙控設備干預系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tools (ROT) intervention systems
|
| ISO 13631-2002
| 石油和天然氣工業.包裝用往復式氣體壓縮機
| Petroleum and natural gas industries - Packaged reciprocating gas compressors
|
| ISO 13678 Technical Corrigendum 1-2005
| 石油和天然氣工業.對套管、管道和管線用的螺紋油的評定和試驗.技術勘誤1
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe; Technical Corrigendum 1
|
| ISO 13678-2000
| 石油和天然氣工業 對套管、管道和管線用的螺紋絕緣膏的評價和試驗
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
|
| ISO 13679-2002
| 石油和天然氣工業.套管和管連接的測試程序
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| ISO 13680 Technical Corrigendum 2-2004
| 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件.技術勘誤2
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
|
| ISO 13680-2000
| 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
| ISO 13686-1998
| 天然氣 質量指標
| Natural gas - Quality designation
|
| ISO 13691-2001
| 石油和天然氣工業 特殊用途高速傳動裝置
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
| ISO 13702-1999
| 石油和天然氣工業 對海上開發安裝中著火和爆炸的控制和減弱 要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
|
| ISO 13703 Technical Corrigendum 1-2002
| 石油和天然氣工業.近海生產平臺上管道系統的設計和安裝.技術勘誤1
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms; Technical Corrigendum 1
|
| ISO 13703-2000
| 石油和天然氣工業 海上開采平臺上管道系統的設計和安裝
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms
|
| ISO 13705-2006
| 石油、石化和天然氣工業.一般煉油廠火力加熱器
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service
|
| ISO 13706-2005
| 石油、石化和天然氣工業.風冷熱交換器
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
|
| ISO 13707-2000
| 石油和天然氣工業 往復式壓縮機
| Petroleum and natural gas industries - Reciprocating compressors
|
| ISO 13709-2003
| 石油、石油化工和天然氣工業用離心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries
|
| ISO 13710-2004
| 石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡? | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
|
| ISO 13734 Technical Corrigendum 1-1999
| 天然氣 有機硫化物添味劑 要求和試驗方法 技術勘誤1
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods; Technical Corrigendum 1
|
| ISO 13734-1998
| 天然氣 有機硫化物添味劑 要求和試驗方法
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods
|
| ISO 13819-2-1995
| 石油和天然氣工業 海上結構 第2部分:固定的鋼結構
| Petroleum and natural gas industries - Offshore structures - Part 2: Fixed steel structures
|
| ISO 13847 Technical Corrigendum 1-2001
| 石油和天然氣工業.管道輸送系統.管道焊接.技術勘誤1
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines; Technical Corrigendum 1
|
| ISO 13847-2000
| 石油和天然氣工業 管道輸送系統 管道的焊接
| Petroleum and natural gas industrie - Pipeline transportation systems - Welding of pipelines
|
| ISO 13879-1999
| 石油和天然氣工業 功能規范的內容和起草
| Petroleum and natural gas industries - Content and drafting of a functional specification
|
| ISO 13880-1999
| 石油和天然氣工業 技術規范的內容和起草
| Petroleum and natural gas industries - Content and drafting of a technical specification
|
| ISO 14111-1997
| 天然氣 分析溯源性準則
| Natural gas - Guidelines for traceability in analysis
|
| ISO 14224-2006
| 石油、石化產品和天然氣工業.設備可靠性和維修數據的采集與交換
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
|
| ISO 14310-2001
| 石油和天然氣工業 下井設備 封隔器和橋塞
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
|
| ISO 14313-1999
| 石油和天然氣工業 管道輸送系統 管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
|
| ISO 14469-1-2004
| 道路車輛.壓縮天然氣(CNG)加添油連接器.第1部分:20 MPa (200 bar)連接器
| Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 1: 20 MPa (200 bar) connector
|
| ISO 14469-3-2006
| 道路車輛.壓縮天然氣(CNG)填充連接器.第3部分:25 MPa (250 bar)連接器
| Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 3: 25 MPa (250 bar) connector
|
| ISO 14532 Technical Corrigendum 1-2002
| 天然氣.詞匯.技術勘誤1
| Natural gas - Vocabulary; Technical Corrigendum 1
|
| ISO 14532-2001
| 天然氣 詞匯
| Natural gas - Vocabulary
|
| ISO 14691-1999
| 石油和天然氣工業 機械動力傳輸用撓性接箍 一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications
|
| ISO 14692-1-2002
| 石油和天然氣工業.玻璃纖維增強塑料管.第1部分:詞匯、符號、應用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
|
| ISO 14692-2 Technical Corrigendum 1-2005
| 石油和天然氣工業.玻璃增強塑料(GRP)管.第2部分:合格鑒定和制造.技術勘誤1
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture; Technical Corrigendum 1
|
| ISO 14692-2-2002
| 石油和天然氣工業.玻璃纖維增強塑料管.第2部分:合格鑒定和制造
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
|
| ISO 14692-3 Technical Corrigendum 1-2005
| 石油和天然氣工業.玻璃增強塑料(GRP)管.第3部分:系統設計.技術勘誤1
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design; Technical Corrigendum 1
|
| ISO 14692-3-2002
| 石油和天然氣工業.玻璃纖維增強塑料管.第3部分:系統管道
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System piping
|
| ISO 14692-4 Technical Corrigendum 1-2006
| 石油和天然氣工業.玻璃纖維增強塑料管.第4部分:制作、安裝和操作;技術勘誤1
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation; Technical Corrigendum 1
|
| ISO 14692-4-2002
| 石油和天然氣工業.玻璃纖維增強塑料管.第4部分:制作、安裝和操作
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
|
| ISO 14693-2003
| 石油和天然氣工業.鉆井和油井輔助設備
| Petroleum and natural gas industries - Drilling and well-servicing equipment
|
| ISO 14723-2001
| 石油和天然氣工業 管道輸送系統 海底管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
|
| ISO 15136-1-2001
| 石油和天然氣工業用下降孔設備 人工升降機用推進腔體泵系統 第1部分：泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps
|
| ISO 15136-2-2006
| 石油和天然氣工業.人工升降機用推進腔體泵系統.第2部分:表面?zhèn)鲃?dòng)系統
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems
|
| ISO 15138 Technical Corrigendum 1-2001
| 石油和天然氣工業 海上開采裝置 供暖 通風和空氣調節 技術勘誤1
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning; Technical Corrigendum 1
|
| ISO 15138-2000
| 石油和天然氣工業 海上開采裝置 供暖 通風和空氣調節
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
|
| ISO 15156-1 Technical Corrigendum 1-2005
| 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第1部分:耐裂化材料選擇的一般原則.技術勘誤
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials; Technical Corrigendum 1
|
| ISO 15156-1-2001
| 石油和天然氣工業 石油制品和天然氣生產中含硫化氫（H2S）環境下使用的材料 第1部分：耐破裂材料的一般選
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials
|
| ISO 15156-2 Technical Corrigendum 1-2005
| 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳鋼和低合金鋼及鑄鐵的使用.
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons; Technical Corrigendum 1
|
| ISO 15156-2-2003
| 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳和低合金鋼及鑄鐵的使用
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons
|
| ISO 15156-3 Technical Corrigendum 1-2005
| 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第1部分:耐裂化CRAs(防腐蝕合金)和其他合金.
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 1
|
| ISO 15156-3 Technical Corrigendum 2-2005
| 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第1部分:耐裂化CRAs(防腐蝕合金)和其他合金.
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 2
|
| ISO 15156-3-2003
| 石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第3部分:耐裂化CRAs(耐腐蝕合金)和其他合金
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
|
| ISO 15403-1-2006
| 天然氣.汽車用壓縮性燃料天然氣.第1部分:質量標記
| Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
|
| ISO 15463-2003
| 石油和天然氣工業.新套管、管和平端鉆管的現場檢驗
| Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
|
| ISO 15500-1 AMD 1-2003
| 道路車輛.壓縮天然氣(CNG)燃料系統元部件.第1部分:一般要求和定義.修改1
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions; Amendment A1
|
| ISO 15500-1-2000
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第1部分:一般要求和定義
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions
|
| ISO 15500-10-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第10部分:氣流調節器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster
|
| ISO 15500-11-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第11部分:天然氣/空氣混合器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 11: Gas/air mixer
|
| ISO 15500-12-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第12部分:減壓閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)
|
| ISO 15500-13-2001
| 道路車輛 壓縮天然氣（CNG）燃料系統部件 第13部分：減壓器（PRD）
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD)
|
| ISO 15500-14-2002
| 道路車輛.壓縮天然氣(CNG)燃料系統部件.第14部分:溢流閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 14: Excess flow valve
|
| ISO 15500-15-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第15部分:防氣罩和通風軟管
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 15: Gas-tight housing and ventilation hose
|
| ISO 15500-16-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第16部分:硬質燃料管線
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 16: Rigid fuel line
|
| ISO 15500-17-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第17部分:柔性燃料管線
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 17: Flexible fuel line
|
| ISO 15500-18-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第18部分:濾清器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 18: Filter
|
| ISO 15500-19-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第19部分:配件
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 19: Fittings
|
| ISO 15500-2-2001
| 道路車輛 壓縮天然氣（CNG）燃料系統部件 第2部分：性能和一般試驗方法
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performance and general test methods
|
| ISO 15500-20-2007
| 道路車輛.壓縮天然氣(CNG)燃料系統部件.第20部分:非不銹鋼制的硬質燃料管線
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 20: Rigid fuel line in material other than stainless steel
|
| ISO 15500-3-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第3部分:防逆閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve
|
| ISO 15500-4-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第4部分:控閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve
|
| ISO 15500-5-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第5部分:手控氣缸閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve
|
| ISO 15500-6-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第6部分:自動閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 6: Automatic valve
|
| ISO 15500-7-2002
| 道路車輛.壓縮天然氣(CNG)燃料系統元部件.第7部分:氣體噴射器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 7: Gas injector
|
| ISO 15500-8-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第6部分:壓力指示器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 8: Pressure indicator
|
| ISO 15500-9-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第9部分:調壓器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator
|
| ISO 15501-1-2001
| 道路車輛 壓縮天然氣燃料系統 第1部分：安全要求
| Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements
|
| ISO 15501-2-2001
| 道路車輛、壓縮天然氣(CNG)燃料系統.第2部分:試驗方法
| Road vehicles - Compressed natural gas (CNG) fuel systems - Part 2: Test methods
|
| ISO 15544-2000
| 石油和天然氣工業 海上開采裝置 緊急反應的要求和指南
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response
|
| ISO 15546-2007
| 石油和天然氣工業.鋁合金鉆桿
| Petroleum and natural gas industries - Aluminium alloy drill pipe
|
| ISO 15547-1-2005
| 石油、石化和天然氣工業.板式熱交換器.第1部分:板框式熱交換器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers
|
| ISO 15547-2-2005
| 石油、石化和天然氣工業.板式熱交換器.第2部分:銅焊鋁板熱交換器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers
|
| ISO 15589-1-2003
| 石油和天然氣工業.管道運輸系統的陰極保護.第1部分:陸地管線
| Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines
|
| ISO 15589-2-2004
| 石油和天然氣工業.管道運輸系統的陰極保護.第2部分:海上管線
| Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines
|
| ISO 15590-1-2001
| 石油和天然氣工業 管道輸送系統用誘導彎頭、管件和法蘭 第1部分：誘導彎頭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
|
| ISO 15590-2-2003
| 石油和天然氣工業.管道輸送系統用進氣彎管、管件和法蘭.第2部分:管件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
|
| ISO 15590-3-2004
| 石油和天然氣工業.管道輸送系統用進氣彎頭、管件和法蘭.第3部分:法蘭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
|
| ISO 15649-2001
| 石油和天然氣工業 管道
| Petroleum and natural gas industries - Piping
|
| ISO 15663-1-2000
| 石油和天然氣工業 壽命周期成本 第1部分:方法學
| Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology
|
| ISO 15663-2-2001
| 石油和天然氣工業 壽命周期成本 第2部分：方法學應用指南和計算方法
| Petroleum and natural gas industries - Life cycle costing - Part 2: Guidance on application of methodology and calculation methods
|
| ISO 15663-3-2001
| 石油天然氣工業.壽命周期費用分析.第3部分:實施指南
| Petroleum and natural gas industries - Life-cycle costing - Part 3: Implementation guidelines
|
| ISO 15761-2002
| 石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
|
| ISO 16070-2005
| 石油和天然氣工業.下井設備.鎖芯軸和落地接頭
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
|
| ISO 16708-2006
| 石油和天然氣工業.管道傳輸系統.基于可靠性的極限狀態法
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
|
| ISO 16812-2007
| 石油、石化和天然氣工業.殼管式熱交換器
| Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
|
| ISO 17078-1-2004
| 石油和天然氣工業.鉆井和生產設備.第1部分:偏心軸
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels
|
| ISO 17776-2000
| 石油和天然氣工業 海上開采裝置 危險識別和風險評估用方法和技術指南
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment
|
| ISO 18453-2004
| 天然氣.水含量和水露點的相關性
| Natural gas - Correlation between water content and water dew point
|
| ISO 19078-2006
| 儲氣瓶.氣瓶安裝檢測和天然氣作燃料機動車路上儲存用高壓儲氣瓶鑒定
| Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| ISO 19739-2004
| 天然氣.用氣相色譜法測定硫化合物的含量
| Natural gas - Determination of sulfur compounds using gas chromatography
|
| ISO 19900-2002
| 石油和天然氣工業.近海結構的一般要求
| Petroleum and natural gas industries - General requirements for offshore structures
|
| ISO 19901-1-2005
| 石油和天然氣工業.海上建筑物的特殊要求.第1部分:Metocean設計和運行研究
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
|
| ISO 19901-2-2004
| 石油和天然氣工業.近海建筑物的特殊要求.第2部分:地震設計規程和標準
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria
|
| ISO 19901-4-2003
| 石油和天然氣工業.近海建筑物的特殊要求.第4部分:土工和基礎設計考慮
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations
|
| ISO 19901-5-2003
| 石油和天然氣工業.海上建筑物的特殊要求.第5部分:設計和施工過程中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction
|
| ISO 19901-7-2005
| 石油和天然氣工業.海上建筑物的特殊要求.第7部分:浮動式海上建筑物和移動式海上設備用保持系統
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
|
| ISO 19903-2006
| 石油和天然氣工業.海上固定的混凝土建筑物
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
| ISO 19904-1-2006
| 石油和天然氣工業.漂浮離岸設施.第1部分:單體船、半潛水船和輕甲板船
| Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars
|
| ISO 20765-1-2005
| 天然氣.熱力學性質計算.第1部分:傳輸和分配設施的氣相特性
| Natural gas - Calculation of thermodynamic properties - Part 1: Gas phase properties for transmission and distribution applications
|
| ISO 21329-2004
| 石油和天然氣工業.管道運輸系統.機械連接器的試驗過程
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
|
| ISO 23251 Technical Corrigendum 1-2007
| 石油、石化和天然氣工業.壓力釋放和降壓系統.技術勘誤1
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems; Technical Corrigendum 1
|
| ISO 23251-2006
| 石油、石化和天然氣工業.壓力.緩解和減少系統
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
|
| ISO 23874-2006
| 天然氣.碳露點計算用氣相色譜法要求
| Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation
|
| ISO 2928-2003
| 25巴(2.5MPa)及以下的天然氣和液相或氣相液化石油氣用橡膠軟管和軟管組件.規范
| Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) - Specification
|
| ISO 3183-2007
| 石油和天然氣工業.管道運輸系統用鋼管
| Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
|
| ISO 3183-3 Technical Corrigendum 1-2000
| 石油和天然氣工業.管道鋼管.交貨技術條件.第3部分:C級鋼管的要求.技術勘誤1
| Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1
|
| ISO 3962-1977
| 石油和天然氣工業用材料和設備.油井或天然氣井用鋼鉆桿的鉆具接頭
| Materials and equipment for petroleum and natural gas industries; Tool joints for steel drill pipe for oil or natural gas wells
|
| ISO 3977-5-2001
| 燃?xì)廨啓C(jī) 采購 第5部分：在石油和天然氣工業中的應用
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
|
| ISO 5226-1985
| 石油和天然氣工業用材料和設備.油井或天然氣井用鋁合金鉆管
| Materials and equipment for petroleum and natural gas industries; Aluminium alloy drill pipe for oil or natural gas wells
|
| ISO 6326-1-2007
| 天然氣.硫化合物測定.第1部分:一般介紹
| Natural gas - Determination of sulfur compounds - Part 1: General introduction
|
| ISO 6326-3-1989
| 天然氣 硫化物的測定 第3部分:用電勢分析法對硫化氫、硫醇硫和硫化羰基硫的測定
| Natural gas; determination of sulfur compounds; part 3: determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry
|
| ISO 6326-5-1989
| 天然氣 硫化物的測定 第5部分:林格聶爾燃燒法
| Natural gas; determination of sulfur compounds; part 5: Lingener combustion method
|
| ISO 6327-1981
| 氣體分析 天然氣水露點的測定 用表面冷凝濕度計測定
| Gas analysis; Determination of the water dew point of natural gas; Cooled surface condensation hygrometers
|
| ISO 6570-2001
| 天然氣 烴液潛在含量的測定 比重法
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods
|
| ISO 6974-1-2000
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第1部分:簡明分析導則
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis
|
| ISO 6974-2-2001
| 天然氣 用氣相色譜法測定具有規定的不確定度的組分 第2部分：測量系統特性和數據處理的統計
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data
|
| ISO 6974-3-2000
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第3部分:用兩填充柱測定氫、氦、氧、氮、二氧化碳和碳至C<下
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C<(Index)8> using two packed columns
|
| ISO 6974-4-2000
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第4部分:用兩柱測定實驗室和在線測量系統用的氮、二氧化碳和
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxyde and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line measuring system using two columns
|
| ISO 6974-5-2000
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第5部分:用三柱測定實驗室和在線處理用的氮、二氧化碳和碳<
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line process application using three columns
|
| ISO 6974-6 Technical Corrigendum 1-2003
| 天然氣.用氣相色譜法測定規定了不確定度的組分.第6部分:用三個毛細管柱測定氫、氦、氧、氮、二氧化碳和C1到
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns; Technical Corrigendum 1
|
| ISO 6974-6-2002
| 天然氣.用氣相色譜法測定規定的不確定度的組分.第6部分:用三個毛細管柱測定氫、氦、氧、氮、二氧化碳和C<下
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C<(Index)1> to C<(Index)8> hydrocarbons using three capillary columns
|
| ISO 6975-1997
| 天然氣 延伸分析 氣相色譜法
| Natural gas - Extended analysis - Gas-chromatographic method
|
| ISO 6976 Technical Corrigendum 1-1997
| 天然氣.熱值、密度和相對密度及化合物沃泊指數的計算.技術勘誤1
| Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 1
|
| ISO 6976 Technical Corrigendum 2-1997
| 天然氣 熱值、密度和相對密度及化合物沃泊指數的計算 技術勘誤2
| Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 2
|
| ISO 6976 Technical Corrigendum 3-1999
| 天然氣 熱值、密度和相對密度及化合物沃泊指數的計算 技術勘誤3
| Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 3
|
| ISO 6978-1-2003
| 天然氣.汞的測定.第1部分:用碘化學吸附法對汞的采樣
| Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine
|
| ISO 6978-2 Technical Corrigendum 2-2006
| 天然氣.汞的測定.第2部分:用金/鉑合金混汞法對汞的采樣.技術勘誤2
| Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy; Technical Corrigendum 2
|
| ISO 6978-2-2003
| 天然氣.汞的測定.第2部分:用碘/鉑合金混汞法對汞的采樣
| Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy
|
| ISO 8943-2007
| 冷凍輕質烴液.液化天然氣的取樣.連續法和間歇法
| Refrigerated light hydrocarbon fluids - Sampling of liquefied natural gas - Continuous and intermittent methods
|
| ISO/TR 13881-2000
| 石油和天然氣工業 產品、加工和服務的分類和合格評定
| Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services
|
| ISO/TR 24094-2006
| 天然氣分析.氣態標準物質的證實方法
| Analysis of natural gas - Validation methods for gaseous reference materials
|
| ISO/TS 15926-4-2007
| 工業自動化系統和集成.包括石油和天然氣生產設施的加工設備使用壽命數據的集成.第4部分:原始參考數據
| Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 4: Initial reference data
|
| ISO/TS 16922-2002
| 天然氣.添味氣體用導則
| Natural gas - Guidelines for odorizing gases
|
| ISO/TS 24817-2006
| 石油、石化和天然氣工業.管件用復合材料檢修. 資格鑒定和設計、安裝、試驗和檢驗
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection
|
| ISO/TS 29001-2003
| 石油、化工和天然氣工業.部門專用質量管理系統.產品和服務機構的要求
| Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations
|
| 編號 | 中文名稱 | 英文名稱 |
|---|