| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 1160-1996
| 液化天然氣用設備和裝置 液化天然氣的一般性能
| Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas
|
| EN 12065-1997
| 液化天然氣設備和安裝 為產生液化天然氣火焰滅火粉末及產生中高膨脹泡沫的泡沫濃縮物的試驗
| Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
|
| EN 12066-1997
| 液化天然氣設備和安裝 液化天然氣蓄氣區域用絕緣套管的試驗
| Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas
|
| EN 12308-1998
| 液化天然裝置和設備 液化天然氣管道中所用的法蘭接頭墊圈設計適配性試驗
| Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
|
| EN 12838-2000
| 液化天然氣（LNG）裝置和設備 LNG采樣系統適用性檢驗
| Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
|
| EN 13423-2000
| 壓縮天然氣車輛操作
| Compresses natural gas vehicle operations
|
| EN 13942-2003
| 石油和天然氣工業 管道運輸系統 管道閥門
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999, modified)
|
| EN 14163-2001
| 石油和天然氣工業 管道運輸系統 管道的焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified)
|
| EN 1473-1997
| 液化天然氣的安裝和設備 近海安裝的設計
| Installation and equipment for liquefied natural gas - Design of onshore installations
|
| EN 1474-1997
| 液化天然氣安裝和設備 裝卸臂設計和檢測
| Installation and equipment for liquefied natural gas - Design and testing of loading/unloading arms
|
| EN 1532-1997
| 液化天然氣的安裝和設備 船一岸接口
| Installation and equipment for liquefied natural gas - Ship to shore interface
|
| EN 1762-1997
| 氣壓為25bar(2.5MPa)及以下的液化石油氣LPG(液相或氣相)及天然氣用橡膠軟管和軟管組件 規范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
|
| EN 1776-1998
| 供氣 天然氣測量站 功能要求
| Gas supply systems - Natural gas measuring stations - Functional requirements
|
| EN ISO 10101-1-1998
| 天然氣 卡爾·費休法測定天然氣中的水 第1部分：介紹
| Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction (ISO 10101-1:1993)
|
| EN ISO 10101-2-1998
| 天然氣 卡爾·費休法測定天然氣中的水 第2部分：滴水法
| Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure (ISO 10101-2:1993)
|
| EN ISO 10101-3-1998
| 天然氣 卡爾·費休法測定天然氣中的水 第3部分：庫侖法
| Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993)
|
| EN ISO 10423-2001
| 石油和天然氣工業 鉆井及開采設備 井口及圣誕樹形設備
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2001)
|
| EN ISO 10426-1-2000+A1-2002
| 石油和天然氣工業 油井固井用水泥和材料 第1部分：規范
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000)
|
| EN ISO 10427-1-2001
| 石油和天然氣工業 套管找中器 第1部分：弓簧套管找中器
| Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001)
|
| EN ISO 10432-1999
| 石油和天然氣工業 下降孔設備 地下安全閥設備
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999)
|
| EN ISO 10437-2003
| 石油，石油化工和天然氣工業 汽輪機 特殊用途設備
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
|
| EN ISO 10439-2002
| 石油，石油化工和天然氣工業 離心壓縮機
| Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)
|
| EN ISO 10440-1-2000
| 石油和天然氣工業 旋轉型容積式壓縮機 第1部分：加工壓縮機(無油)
| Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1: Process compressors (oil-free) (ISO 10440-1:2000)
|
| EN ISO 10440-2-2001
| 石油和天然氣工業 旋轉型容積式壓縮機 第2部分：整裝空氣壓縮機(無油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
|
| EN ISO 10441-1999
| 石油和天然氣工業 機械動力傳輸用撓性接箍 特殊應用
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - Special purpose applications (ISO 10441:1999)
|
| EN ISO 10442-2002
| 石油，石油化工和天然氣工業 整裝齒輪離心空氣壓縮機
| Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
|
| EN ISO 10715-2000
| 天然氣 取樣指南
| Natural gas - Sampling guidelines (ISO 10715:1997)
|
| EN ISO 10723-2002
| 天然氣 在線分析系統的性能評定
| Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995)
|
| EN ISO 11439-2000
| 氣瓶 車上貯存機動車用天然氣燃料用高壓氣瓶
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000)
|
| EN ISO 11541-2002
| 天然氣 高壓下含水量的測定/注：認可通知
| Natural gas - Determination of water content at high pressure (ISO 11541:1997)
|
| EN ISO 11960-2001+AC-2002
| 石油和天然氣工業 油井套管和油管用鋼管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)
|
| EN ISO 11961-1996
| 石油和天然氣工業 鉆井桿用鋼管 規范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996)
|
| EN ISO 13500-1998
| 石油和天然氣工業 鉆井液體材料 規范和測試
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998)
|
| EN ISO 13533-2001
| 石油和天然氣工業 鉆井和生產設備 鉆孔設備
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001)
|
| EN ISO 13534-2000
| 石油和天然氣工業 鉆井和生產設備 提升設備的檢查、維護、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000)
|
| EN ISO 13535-2000
| 石油和天然氣工業 鉆井和生產設備 提升設備
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000)
|
| EN ISO 13625-2002
| 石油和天然氣工業 鉆探和開采設備 海洋鉆機提升機聯結器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
|
| EN ISO 13628-1-1999
| 石油和天然氣工業 水下采油系統的設計和操作 第1部分：一般要求和建議
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999)
|
| EN ISO 13628-2-2000
| 石油和天然氣工業 水下采油系統的設計和操作 第2部分：海底和海洋設備用軟管系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000)
|
| EN ISO 13628-3-2000
| 石油和天然氣工業 水下采油系統的設計和操作 第3部分：通流線系統
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000)
|
| EN ISO 13628-4-1999
| 石油和天然氣工業 水下采油系統的設計和操作 第4部分：井口和采油樹設備
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999)
|
| EN ISO 13631-2002
| 石油和天然氣工業 整裝往復式氣體壓縮機
| Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
|
| EN ISO 13680-2001
| 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000)
|
| EN ISO 13691-2002
| 石油和天然氣工業 特殊用途高速齒輪裝置
| Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001)
|
| EN ISO 13702-1999
| 石油和天然氣工業 對海上開發安裝中著火和爆炸的控制和減弱要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999)
|
| EN ISO 13703-2000
| 石油和天然氣工業 海上開采平臺上管道系統的設計和安裝
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000)
|
| EN ISO 13705-2001
| 石油和天然氣工業 一般煉油廠的燒火的加熱器
| Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001)
|
| EN ISO 13706-2000
| 石油和天然氣工業 風冷熱交換器
| Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000)
|
| EN ISO 13734-2000
| 天然氣 有機硫化物添味劑 要求和試驗方法
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods (ISO 13734:1998)
|
| EN ISO 14111-1999
| 天然氣 分析溯源性準則
| Natural gas - Guidelines for traceability in analysis (ISO 14111:1997)
|
| EN ISO 14310-2001
| 石油和天然氣工業 井下設備 裝填器和橋狀砂堵
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001)
|
| EN ISO 14691-2000
| 石油和天然氣工業 機械動力傳輸撓性接箍 一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999)
|
| EN ISO 14692-1-2002
| 石油和天然氣工業 玻璃纖維增強塑料管 第1部分：詞匯、符號、設備和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002)
|
| EN ISO 14692-2-2002
| 石油和天然氣工業 玻璃纖維增強塑料管 第2部分：資格和制造
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002)
|
| EN ISO 14692-3-2002
| 石油和天然氣工業 玻璃纖維增強塑料管 第3部分：系統設計
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002)
|
| EN ISO 14692-4-2002
| 石油和天然氣工業 玻璃纖維增強塑料管 第4部分：制造 、安裝和運行
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002)
|
| EN ISO 14723-2001
| 石油和天然氣工業 管道輸送系統 海底管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001)
|
| EN ISO 15136-1-2001
| 石油和天然氣的井下設備 人工升降梯的空腔泵系統 第1部分：泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001)
|
| EN ISO 15138-2000
| 石油和天然氣工業 海上開采裝置 供暖 通風和空氣調節
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2000)
|
| EN ISO 15156-1-2001
| 石油和天然氣工業 在石油和天然氣生產中用于硫化氫環境的材料 第1部分：耐裂材料選擇的一般原則
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001)
|
| EN ISO 15546-2002
| 石油和天然氣工業 鋁合鉆管
| Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002)
|
| EN ISO 15547-2001
| 石油和天然氣工業 板式熱交換器
| Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000)
|
| EN ISO 15761-2002
| 石油及天然氣工業用DN100及較小的鋼閘閥 、球閥和防逆閥
| Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002)
|
| EN ISO 16070-2001
| 石油和天然氣工業 井下設備 閉鎖心軸和落地短接管
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001)
|
| EN ISO 17776-2002
| 石油和天然氣工業 海上生產裝置 危險識別和風險評定用工具和技術的指南
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000)
|
| EN ISO 19900-2002
| 石油和天然氣工業 海上結構的一般要求
| Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002)
|
| EN ISO 19901-4-2003
| 石油和天然氣工業 海上結構的特殊要求 第4部分：土工技術和基礎設計的考慮內容
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003)
|
| EN ISO 19901-5-2003
| 石油和天然氣工業 海上結構的特殊要求 第5部分：設計和施工中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003)
|
| EN ISO 3977-5-2003
| 燃?xì)廨啓C(jī) 采購 第5部分：石油與天然氣工業的應用
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
|
| EN ISO 6326-3-1997
| 天然氣 硫化物的測定 第3部分：用電勢分析法對硫化氫、硫醇硫和硫化羰基硫的測定
| Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989)
|
| EN ISO 6326-5-1997
| 天然氣 硫化物的測定 第5部分：林格聶爾燃燒法
| Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989)
|
| EN ISO 6974-1-2001
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第1部分：簡明分析導則
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1-2000)
|
| EN ISO 6974-2-2002
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第2部分：測量系統的特性和數據處理的統計
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001)
|
| EN ISO 6974-3-2001
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第3部分：用兩填充柱測定氫、氦、氧、氮、二氧化碳和C8的
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000)
|
| EN ISO 6974-4-2001
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第4部分：用兩柱測定實驗室和在線測量系統用的氮、二氧化
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:20
|
| EN ISO 6974-5-2001
| 天然氣 用氣相色譜法測定規定的不確定度的組分 第5部分：用三柱測定實驗室和在線外處理用的氮、二氧化碳
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974
|
| prEN 14141-2003
| 天然氣管道輸送閥 試驗和性能要求
| Valves for natural gas transportation in pipelines - Performance requirements and tests
|
| prEN 14161-2003
| 石油和天然氣工業 管道運輸系統
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified)
|
| prEN 1762-2003
| 氣壓為25bar(2.5MPa)液化石油氣LPG(液相或氣相)及天然氣用橡膠軟管和軟管組件 規范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification / Note: Intended as replacement for EN 1762 (1997-10).
|
| prEN ISO 10434-2002
| 石油和天然氣工業用螺栓帽狀鋼閘閥
| Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002)
|
| prEN ISO 13707-2000
| 石油和天然氣工業 往復式壓縮機
| Petroleum and natural gas industries - Reciprocating compressors (ISO/FDIS 13707:2000)
|
| prEN ISO 15156-3-2003
| 石油和天然氣工業 在石油和天然氣生產中用于硫化氫環境的材料 第3部分：耐裂合金(CRAs)(耐蝕合金)和其他
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2003)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|