| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 25150-1990
| 有軌車輛.車廂內部.車輛清潔度的設計要求
| Rail vehicles; interior; design requirements for cleaning
|
| DIN 25410-2001
| 核設施.元件表面清潔度
| Nuclear facilities - Surface cleanliness of components
|
| DIN 38402-30-1998
| 德國對水.廢水和淤泥的統一檢驗方法.總則(A組).第30部分:非均質水試樣預處理、調勻和等分
| German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 30: Pretreatment, homogenization and aliquotation of non-homogeneous water samples (A 30)
|
| DIN 4261-1-2002
| 小型污水處理廠.第1部分:廢水預處理廠
| Small sewage treatment plants - Part 1: Plants for waste water pretreatment
|
| DIN 52455-1-2003
| 建筑業密封材料試驗.粘合和膨脹試驗.第1部分:標準氣候、水或高溫預處理
| Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water,or increased temperatures
|
| DIN 80200-1979
| 船舶制造用的鋼制部件.表面預處理、廠內涂漆和底漆涂層的符號
| Steel components for shipbuilding; symbols for surface preparations, shop primers and priming coats
|
| DIN EN 12222-1997
| 鞋.鞋及其部件預處理和檢驗的標準大氣條件
| Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear; German version EN 12222:1997
|
| DIN EN 12255-3-2001
| 污水處理廠.第3部分:預處理(包括技術勘誤AC-2000)
| Wastewater treatment plants - Part 3: Preliminary treatment (includes corrigendum AC:2000); German version EN 12255-3:2000 + AC:2000)
|
| DIN EN 12921-1-2005
| 使用液體或蒸氣的工業產品的表面清潔和預處理機器.第1部分:通用安全要求
| Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements; German version EN 12921-1:2005
|
| DIN EN 12921-2-2005
| 使用液體或蒸氣的工業產品的表面清潔和預處理機器.第2部分:使用水基清潔液的機械安全
| Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids; German version EN 12921-2:2005
|
| DIN EN 12921-3-2005
| 使用液體或蒸氣的工業產品的表面清潔和預處理機器.第3部分:使用易燃清潔液體的機械的安全
| Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids; German version EN 12921-3:2005
|
| DIN EN 12921-4-2005
| 利用液體或蒸汽的工業產品的表面清潔和預處理機器.第4部分:利用鹵化溶劑的機械安全
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents; German version EN 12921-4:2005
|
| DIN EN 13507-2001
| 熱噴涂.熱噴涂金屬部件和元件表面預處理
| Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2001
|
| DIN EN 13946-2003
| 水質.河床硅藻類常規取樣和預處理的指導性標準
| Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers; German version EN 13946:2003
|
| DIN EN 14694-2005
| 防水用柔性薄板.車輛可通過的混凝土船橋甲板和其他混凝土表面的防水.預處理產生損壞后耐動態水壓的測定
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment; German version EN 14694:2005
|
| DIN EN ISO 11125-1-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第1部分:取樣
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
|
| DIN EN ISO 11125-2-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第2部分:粒度分布測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997
|
| DIN EN ISO 11125-3-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第3部分:硬度測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997
|
| DIN EN ISO 11125-4-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸金屬磨料試驗方法.第4部分:表觀密度測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997
|
| DIN EN ISO 11125-5-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第5部分:有缺陷顆粒百分比和微結構的測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN ISO 11125-5:1997
|
| DIN EN ISO 11125-6-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第6部分:外來雜質的測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997
|
| DIN EN ISO 11125-7-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸金屬磨料試驗方法.第7部分:含水量測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997
|
| DIN EN ISO 11126-10-2005
| 涂裝油漆和有關產品前鋼材預處理.非金屬噴砂清理磨料的規范.第10部分:鐵鋁石榴石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004
|
| DIN EN ISO 11126-6-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第6部分:煉鐵爐渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997
|
| DIN EN ISO 11126-7-1999
| 涂裝油漆和相關產品前鋼基體的預處理. 非金屬噴射清理磨料規范.第7部分:熔融氧化鋁
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999
|
| DIN EN ISO 11126-8-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第8部分:橄欖石沙
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997
|
| DIN EN ISO 11126-9-2005
| 涂裝油漆和有關產品前鋼材預處理.非金屬噴砂清理磨料的規范.第9部分:十字石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
|
| DIN EN ISO 11127-1-1997
| 涂裝油漆和相關產品前鋼基體的預處理.非金屬噴射清理用磨料的試驗方法.第1部分:抽樣
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993); German version EN ISO 11127-1:1997
|
| DIN EN ISO 11127-2-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第2部分:粒度分布測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997
|
| DIN EN ISO 11127-3-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第3部分:表觀密度的測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993); German version EN ISO 11127-3:1997
|
| DIN EN ISO 11127-4-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第4部分:通過玻璃劃痕試驗評定硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993); German version EN ISO 11127-4:1997
|
| DIN EN ISO 11127-5-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第5部分:含水量測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993); German version EN ISO 11127-5:1997
|
| DIN EN ISO 11127-6-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第6部分:通過測量電導率測定水溶性雜質
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993); German version EN ISO 11127-6:1997
|
| DIN EN ISO 11127-7-1997
| 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第7部分:水溶性氯化物的測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993); German version EN ISO 11127-7:1997
|
| DIN EN ISO 14644-1-1999
| 潔凈室和相關控制環境.第1部分:空氣清潔度分級 (ISO 14644-1:1999); 德文版本 EN ISO 14644-1:1999
| Cleanroom and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999); German version EN ISO 14644-1:1999
|
| DIN EN ISO 8501-1 Bb.1-2002
| 使用涂料和相關產品前鋼基材預處理.表面清潔度目視評定.對第1部分的參考性補充:不同磨料噴射清潔造成鋼材表
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives (ISO 8501-1:1988/Suppl:1994); German version EN ISO 8501-1:2001/Supplement:2001 (Endorsement of EN ISO 8501-1:2001/Supplement:2001)
|
| DIN EN ISO 8501-1-2002
| 使用涂料和相關產品前鋼基材預處理.表面清潔度目視評定.第1部分:未涂覆和徹底清除原有涂層后鋼材的銹蝕等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:1988); German version EN ISO 8501-1:2001 (Endorsement of EN ISO 8501-1:2001 as German Standard)
|
| DIN EN ISO 8501-2-2002
| 使用涂料和相關產品前鋼基材準備.表面清潔度目視評定.第2部分:原有覆層局部除去后鋼基材準備等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994); German version EN ISO 8501-2:2001 (Endorsement of EN ISO 8501-2:2001 as German Standard)
|
| DIN EN ISO 8502-11-2006
| 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第11部分:水溶性硫酸鹽的現場滴定測定方法(ISO 8502
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006); German version EN ISO 8502-11:2006
|
| DIN EN ISO 8502-12-2005
| 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第12部分:水溶性鐵離子的現場滴定測定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003); German version EN ISO 8502-12:2004
|
| DIN EN ISO 8502-2-2006
| 使用油漆涂料和相關產品之前鋼基材的清理處理.表面清潔度的評定試驗.第2部分:已清潔的表面上氯化物的實驗室
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005); German version EN ISO 8502-2:2005
|
| DIN EN ISO 8502-3-1999
| 使用油漆涂料和相關產品之前鋼基材的清理處理.表面清潔度的評定試驗.第3部分:為涂漆料而清理處理的鋼表面上
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992); German version EN ISO 8502-3:1999
|
| DIN EN ISO 8502-4-1999
| 使用涂層材料前鋼基材表面清理準備.表面清潔度評定檢驗.第4部分:涂層前凝露概率估算指南
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993); German version EN ISO 8502-4:1999
|
| DIN EN ISO 8502-5-2005
| 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第5部分:涂裝前鋼材表面上氯化物測定(離子探測管法)
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998); German version EN ISO 8502-5:2004
|
| DIN EN ISO 8502-8-2005
| 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第8部分:水分的現場折射測定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture (ISO 8502-8:2001); German version EN ISO 8502-8:2004
|
| DIN EN ISO 8502-9-2001
| 使用涂料和有關產品前鋼底材的制備.表面清潔度評定試驗.第9部分:水溶性鹽熱導測定的現場方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998); German version EN ISO 8502-9:2000
|
| DIN EN ISO 8503-5-2005
| 涂裝油漆和有關產品前鋼材預處理.噴砂清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003); German version EN ISO 8503-5:2004
|
| DIN EN ISO 9692-2-1999
| 焊接和相關工藝.接頭的預處理.第2部分:鋼的埋弧焊（ISO 9692-2-1998,包括技術勘誤AC-1999)
| Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998, includes Corrigendum AC:1999); German version EN ISO 9692-2:1998 + AC:1999
|
| DIN ISO 11464-1996
| 土質.理化分析試樣預處理
| Soil quality - Pretreatment of samples for physico-chemical analysis (ISO 11464:1994)
|
| DIN ISO 14507-2004
| 土壤質量.有機污染物測定用樣品的預處理
| Soil quality - Pretreatment of samples for determination of organic contaminants (ISO 14507:2003)
|
| DIN ISO 16720-2005
| 土質.連續分析用試樣的凍干法預處理
| Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005)
|
| DIN ISO 98-2001
| 紡織機械和附件.紡前預處理機械和紡紗機械.上羅拉的包紗主要尺寸
| Textile machinery and accessories - Spinning preparatory and machinery - Main dimensions of coverings for top rollers
|
| DIN VDE 0745-200-1992
| 涂漆和涂裝用非可燃材料用靜電手持噴涂設備規范
| Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing; german version EN 50059:1990
|
| 編號 | 中文名稱 | 英文名稱 |
|---|