| 編號 | 中文名稱 | 英文名稱 |
|---|
| FZ/T 90074-2004
| 紡織機械產品涂裝
| ()
|
| FZ/T 91007-2004
| 紡織機械產品涂裝工藝
| ()
|
| GB 12367-2006
| 涂裝作業安全規程靜電噴漆工藝安全
| Safety code for painting - Safety for electrostatic spray painting process
|
| GB 12942-2006
| 涂裝作業安全規程有限空間作業安全技術要求
| Safety code for painting - Technical requirements of safety for working in confined spaces
|
| GB 14443-1993
| 涂裝作業安全規程涂層烘干室安全技術規定
| Safety code for painting--Safety rules for paint drying oven
|
| GB 14443-2007
| 涂裝作業安全規程 涂層烘干室安全技術規定
| ()
|
| GB 14444-2006
| 涂裝作業安全規程噴漆室安全技術規定
| Safety code for painting - Safety rules for spraying booth
|
| GB 14773-1993
| 涂裝作業安全規程靜電噴槍及其輔助裝置安全技術條件
| Safety code for painting--Safety specification for electrostatic spray guns and associated apparatus
|
| GB 14773-2007
| 涂裝作業安全規程 靜電噴槍及其輔助裝置安全技術條件
| ()
|
| GB 15607-1995
| 涂裝作業安全規程粉末靜電噴涂工藝安全
| Safety code for painting--Safety for electrostatic powder spraying process
|
| GB 17750-1999
| 涂裝作業安全規程浸涂工藝安全
| Safety code for painting--Safety for dipping process
|
| GB 20101-2006
| 涂裝作業安全規程 有機廢氣凈化裝置安全技術規定
| Safety code for painting - Safety rules for purification equipment of exhaust organic gas
|
| GB 6514-1995
| 涂裝作業安全規程涂漆工藝安全及其通風凈化
| Safety code for painting--Safety，ventilation and air clean-up for painting process
|
| GB 7691-2003
| 涂裝作業安全規程安全管理通則
| Safety code for painting--Safety management general rule
|
| GB 7692-1999
| 涂裝作業安全規程涂漆前處理工藝安全及其通風凈化
| Safety code for painting--Safety，ventilation and air clean-up for pretreatment process of painting
|
| GB/T 11373-1989
| 熱噴涂金屬件表面預處理通則
| The general principle of surface preparation of metallic substrate for thermal spraying
|
| GB/T 13288-1991
| 涂裝前鋼材表面粗糙度等級的評定 (比較樣塊法)
| The assessment of profile grades of steel surface before application of paint and related products--Comparator
|
| GB/T 14441-1993
| 涂裝作業安全規程術語
| Safety code for painting--Terminology
|
| GB/T 18178-2000
| 水性涂料涂裝體系選擇通則
| General rules of the selection for painting system of water paint
|
| GB/T 18570.10-2005
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗第10部分：水溶性氯化物的現場滴定測定法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride
|
| GB/T 18570.2-2001
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗清理過的表面上氯化物的實驗室測定
| Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces
|
| GB/T 18570.3-2005
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗第3部分：涂覆涂料前鋼材表面的灰塵評定(壓敏粘帶法)
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method)
|
| GB/T 18570.4-2001
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗涂覆涂料前凝露可能性的評定導則
| Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application
|
| GB/T 18570.5-2005
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗第5部分：涂覆涂料前鋼材表面的氯化物測定(離子探測管法)
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method)
|
| GB/T 18570.6-2005
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗第6部分：可溶性雜質的取樣 Bresle法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 6:Extraction of soluble contaminants for analysis-The Bresle method
|
| GB/T 18570.8-2005
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗第8部分：濕氣的現場折射測定法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture
|
| GB/T 18570.9-2005
| 涂覆涂料前鋼材表面處理表面清潔度的評定試驗第9部分：水溶性鹽的現場電導率測定法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts
|
| GB/T 18593-2001
| 熔融結合環氧粉末涂料的防腐蝕涂裝
| Anti-corrosive painting of fusion bonded epoxy coating powders
|
| GB/T 19349-2003
| 金屬和其他無機覆蓋層為減少氫脆危險的鋼鐵預處理
| Metallic and other inorganic coatings--Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
| GB/T 20110-2006
| 液壓傳動零件和元件的清潔度與污染物的收集、分析和數據報告相關的檢驗文件和準則
| Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection,analysis and data reporting
|
| GB/T 20217-2006
| 保證氧用工業過程測量和控制裝置清潔度的程序
| Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
|
| GB/T 2951.9-1997
| 電纜絕緣和護套材料通用試驗方法第4部分:聚乙烯和聚丙烯混合料專用試驗方法第2節:預處理后斷裂伸長率試驗--
| Common test methods for insulating and sheathing materials of electric cables--Part 4:Methods specific to polyethylene and polypropylene compounds--Section two:Elongation at break after pre-conditioning--Wrapping test after pre-conditioning--Wrapping tes
|
| GB/T 3821-2005
| 中小功率內燃機清潔度測定方法
| Small and medium power internal combustion engines-Cleanliness measurement
|
| GB/T 5476-1996
| 離子交換樹脂預處理方法
| Methods for pretreating ion exchange resins
|
| GB/T 6807-2001
| 鋼鐵工件涂裝前磷化處理技術條件
| Specifications for phosphating treatment of iron and steel parts before painting
|
| GB/T 8264-1987
| 涂裝技術術語
| Glossary of painting terms
|
| GB/T 8923-1988
| 涂裝前鋼材表面銹蝕等級和除銹等級
| Rust grades and preparation grades ofsteel surfaces before application of paints and related products
|
| GB/Z 19848-2005
| 液壓元件從制造到安裝達到和控制清潔度的指南
| Hydraulic fluid power-Component cleanliness-Guidelines for achieving and controlling cleanliness of components from manufacture to installation
|
| GB/Z 20423-2006
| 液壓系統總成清潔度檢驗
| Hydraulic fluid power―Assembled systems―Verification of cleanliness
|
| HG/T 20587-1996
| 化工建筑涂裝設計規定
| ()
|
| JB/T 10151-1999
| 普通磨料 清潔度的測定
| ()
|
| JB/T 10223-2001
| 工程機械液力變矩器清潔度 檢測方法及指標
| ()
|
| JB/T 10240-2001
| 靜電粉末涂裝設備
| ()
|
| JB/T 10242-2001
| 陰極電泳涂裝通用技術條件
| ()
|
| JB/T 10394.1-2002
| 涂裝設備通用技術條件 第1部分：鈑金件
| ()
|
| JB/T 10394.2-2002
| 涂裝設備通用技術條件 第2部分：焊接件
| ()
|
| JB/T 10394.3-2002
| 涂裝設備通用技術條件 第3部分：涂層
| ()
|
| JB/T 10394.4-2002
| 涂裝設備通用技術條件 第4部分：安裝
| ()
|
| JB/T 10536-2005
| 涂裝供漆系統 技術條件
| ()
|
| JB/T 10560-2006
| 滾動軸承 防銹油、清洗劑 清潔度及評定方法
| ()
|
| JB/T 4041-1994
| 鑿巖機械與氣動工具 產品清潔度 通用檢測方法
| ()
|
| JB/T 4058-1999
| 汽輪機清潔度
| ()
|
| JB/T 5000.12-2007
| 重型機械通用技術條件 第12部分：涂裝
| Heavy mechanical general techniques and standards-Part 12:Paint
|
| JB/T 5243-2005
| 收獲機械傳動箱 清潔度測定方法
| ()
|
| JB/T 5288.2-1991
| 擺線針輪減速機 清潔度測定方法
| ()
|
| JB/T 5365.1-1991
| 鑄造機械清潔度測定方法 重量法
| ()
|
| JB/T 5365.2-1991
| 鑄造機械清潔度測定方法 顯微鏡法
| ()
|
| JB/T 5946-1991
| 工程機械 涂裝通用技術條件
| ()
|
| JB/T 6002-2007
| 渦輪增壓器 清潔度限值及測定方法
| Turbochargers-Limit values and measurement methods for cleanliness
|
| JB/T 6418-1992
| 分離機械 清潔度測定方法
| ()
|
| JB/T 6886-1993
| 通風機 涂裝技術條件
| ()
|
| JB/T 6896-2007
| 空氣分離設備表面清潔度
| ()
|
| JB/T 6913-1993
| 泵產品清潔度
| ()
|
| JB/T 6978-1993
| 涂裝前表面準備 酸洗
| ()
|
| JB/T 7050-2005
| 滾動軸承 清潔度評定方法
| ()
|
| JB/T 7157-1993
| 工程機械 燃油箱清潔度測定方法
| ()
|
| JB/T 7158-1993
| 工程機械 零部件清潔度測定方法
| ()
|
| JB/T 7217-1994
| 分離機械 涂裝通用技術條件
| ()
|
| JB/T 7455-2007
| 機床涂裝用不飽和聚酯膩子
| Unsaturated polyester putty for decorating of machine tool
|
| JB/T 7504-1994
| 靜電噴涂裝備 技術條件
| ()
|
| JB/T 7661-2004
| 柴油機油泵油嘴產品清潔度 限值及測定方法
| ()
|
| JB/T 7663.2-2007
| 容積式壓縮機 涂裝技術條件
| Coating specifications for displacement compressors
|
| JB/T 7858-2006
| 液壓元件清潔度評定方法及液壓元件清潔度指標
| Method to determine cleanliness and acceptance criterions for hydraulic components
|
| JB/T 7929-1999
| 齒輪傳動裝置清潔度
| ()
|
| JB/T 9058-1999
| 制冷設備清潔度測定方法
| ()
|
| JB/T 9062-1999
| 采暖通風與空氣調節設備涂裝技術條件
| ()
|
| JB/T 9591.1-1999
| 燃氣輪機 油系統清潔度
| ()
|
| JB/T 9591.2-1999
| 燃氣輪機 油系統清潔度測試取樣
| ()
|
| JB/T 9591.3-1999
| 燃氣輪機 油系統清潔度測試用顯微鏡計數法測定油液中固體顆粒污染度
| ()
|
| JB/T 9774-2005
| 中小功率內燃機 清潔度限值
| ()
|
| JB/T 9877-1999
| 金屬切削機床 清潔度的測定
| ()
|
| JB/T 9954-1999
| 鍛壓機械液壓系統 清潔度
| ()
|
| QB/T 1896-1993
| 自行車粉末涂裝技術條件
| ()
|
| QB/T 2183-1995
| 自行車電泳涂裝技術條件
| ()
|
| QB/T 2528-2001
| 縫紉機涂裝技術條件
| ()
|
| QC/T 512-1999(2005)
| 汽車柴油機用噴油泵及噴油器清潔度測定方法及限值
| ()
|
| QC/T 546-1999(2005)
| 汽車筒式減振器 清潔度限值及測定方法
| ()
|
| QC/T 571-1999(2005)
| 汽車清潔度工作導則 名詞、術語
| ()
|
| QC/T 572-1999(2005)
| 汽車清潔度工作導則 測定方法
| ()
|
| QC/T 573-1999(2005)
| 汽車清潔度工作導則 人、物和環境
| ()
|
| QC/T 574-1999(2005)
| 汽車清潔度工作導則 抽樣規則
| ()
|
| QC/T 575-1999(2005)
| 汽車清潔度工作導則 雜質的分析方法
| ()
|
| QC/T 683-2002
| 摩托車和輕便摩托車發動機清潔度限值及測量方法
| ()
|
| SY/T 0407-1997
| 涂裝前鋼材表面預處理規范
| ()
|
| SY/T 0407-1997(2005)
| 涂裝前鋼材表面預處理規范
| ()
|
| YB/T 036.19-1992(2005)
| 冶金設備制造通用技術條件 涂裝
| ()
|
| YB/T 164-1999
| 鐵水預處理用Al2O3-SiC-C磚
| ()
|
| YB/T 3220.11-1987(2005)
| 寶鋼二高爐設備制造通用技術條件 涂裝
| ()
|
| YB/T 9256-1996
| 鋼結構、管道涂裝工程技術規范
| ()
|
| YS/T 450-2002
| 冰箱用高清潔度銅管
| ()
|
| 編號 | 中文名稱 | 英文名稱 |
|---|