| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC/PAS 62182 Edition 1.0-2000
| 可靠度檢驗之前的不密閉的表面安裝器件的預處理
| Preconditioning of nonhermetic surface mount devices prior to reliability testing
|
| ISO 11124-1-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第1部分:一般介紹及分類
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification
|
| ISO 11124-2-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第2部分:冷硬鑄鐵丸
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit
|
| ISO 11124-3-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第3部分:高碳鑄鋼丸和砂
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit
|
| ISO 11124-4-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第4部分:低碳鑄鋼丸
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot
|
| ISO 11125-1-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第1部分:抽樣
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
|
| ISO 11125-2-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution
|
| ISO 11125-3-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第3部分:硬度測定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness
|
| ISO 11125-4-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第4部分:表觀密度測定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density
|
| ISO 11125-5-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第5部分:缺陷顆粒的百分比和微結構的測定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure
|
| ISO 11125-6-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第6部分:外來雜質測定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter
|
| ISO 11125-7-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第7部分:含水量測定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
|
| ISO 11126-1 Technical Corrigendum 1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1
|
| ISO 11126-1 Technical Corrigendum 2-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤2
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2
|
| ISO 11126-1-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification
|
| ISO 11126-10-2000
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第10部分:鐵鉛石榴石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne
|
| ISO 11126-3-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第3部分:銅精煉渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag
|
| ISO 11126-4-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第4部分:煤爐渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag
|
| ISO 11126-5-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第5部分:鎳精煉渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag
|
| ISO 11126-6-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第6部分:煉鐵爐渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag
|
| ISO 11126-7 Technical Corrigendum 1-1999
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁 技術勘誤1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1
|
| ISO 11126-7-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
|
| ISO 11126-8-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第8部分:橄欖石砂
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand
|
| ISO 11126-9-1999
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第9部分:十字石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
|
| ISO 11127-1-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第1部分:抽樣
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling
|
| ISO 11127-2-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution
|
| ISO 11127-3-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第3部分:表觀密度測定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density
|
| ISO 11127-4-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第4部分:通過玻璃載片試驗評定硬度
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test
|
| ISO 11127-5-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第5部分:含水量測定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture
|
| ISO 11127-6-1993
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第6部分:通過測量電導率測定水溶性雜質
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement
|
| ISO 11127-7-1993
| 涂裝油漆和有關產品前鋼材預處理 非金屬噴沙清理磨料的試驗方法 第7部分:水溶性氯化物的測定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides
|
| ISO 11218-1993
| 航空航天 液壓油液清潔度分級
| Aerospace; cleanliness classification for hydraulic fluids
|
| ISO 11464-2006
| 土壤質量.物理化學分析用樣品的預處理
| Soil quality - Pretreatment of samples for physico-chemical analysis
|
| ISO 11998-2006
| 色漆和清漆.測定涂層的耐濕性和清潔度
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
|
| ISO 12345-2002
| 柴油發動機.燃料噴射設備的清潔度評定
| Diesel engines - Cleanliness assessment of fuel injection equipment
|
| ISO 14507-2003
| 土質.測定有機污物用試樣的預處理
| Soil quality - Pretreatment of samples for determination of organic contaminants
|
| ISO 14952-1-2003
| 航天系統.流體系統的表面清潔度.第1部分:詞匯
| Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary
|
| ISO 14952-2-2003
| 航天系統.流體系統的表面清潔度.第2部分:清潔度等級
| Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness levels
|
| ISO 14952-3-2003
| 航天系統.流體系統的表面清潔度.第3部分:非揮發性殘余物和粒子濃度的測定用分析方法
| Space systems - Surface cleanliness of fluid systems - Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination
|
| ISO 14952-4-2003
| 航天系統.流體系統的表面清潔度.第4部分:初步清潔過程
| Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes
|
| ISO 14952-5-2003
| 航天系統.流體系統的表面清潔度.第5部分:干燥過程
| Space systems - Surface cleanliness of fluid systems - Part 5: Drying processes
|
| ISO 14952-6-2003
| 航天系統.流體系統的表面清潔度.第6部分:精細清潔過程
| Space systems - Surface cleanliness of fluid systems - Part 6: Precision-cleaning processes
|
| ISO 15388-2004
| 空間系統.污染和清潔度控制
| Space systems - Contamination and cleanliness control
|
| ISO 16720-2005
| 土質.連續分析用試樣的凍干法預處理
| Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
|
| ISO 18413-2002
| 液壓傳動.部件和元件的清潔度.與污物收集、分析和數據報告相關的檢驗文件和原則
| Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting
|
| ISO 6761-1981
| 鋼管 焊接用管端和配件的預處理
| Steel tubes; Preparation of ends of tubes and fittings for welding
|
| ISO 8501-1 Supplement-1994
| 涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分的補充信息:用不同磨料噴砂處理時鋼表面變
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
|
| ISO 8501-1-1988
| 涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分:未涂覆鋼襯底和已有覆層全部除去后鋼襯底
| Preparation of steel substrates before application of paints and related products; visual assessment of surface cleanliness; part 1: rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
| ISO 8501-2-1994
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分:局部去除原有涂層后鋼材的除銹等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
| ISO 8501-3-2006
| 涂裝油漆和有關產品前鋼材的預處理.表面清潔度的目視評定.第3部分:焊接、切邊及其它表面缺陷區域的處理等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
|
| ISO 8502-11-2006
| 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第11部分:水溶性硫酸鹽濁度測定的現場方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
|
| ISO 8502-12-2003
| 使用涂料和相關產品之前鋼基質的制備.表面清潔度評定試驗.第12部分:滴定測定水溶鐵離子的現場試驗方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrrous ions
|
| ISO 8502-2-2005
| 涂覆油漆和相關產品前鋼材襯底的預處理.表面清潔度的評定試驗.第2部分:潔凈表面氯化物的測定
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
|
| ISO 8502-3-1992
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第3部分:油漆前預處理后的鋼材表面上的灰塵評定(壓
| Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
| ISO 8502-4-1993
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第4部分:油覆前凝露可能性的評定導則
| Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application
|
| ISO 8502-5-1998
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第5部分:涂裝前鋼材表面上氯化物測定(離子探測管法)
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
|
| ISO 8502-6-2006
| 油漆和相關產品用前鋼材的預處理.表面清潔度的評定試驗.第6部分:提取分析用可溶性雜質.Bresle法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method
|
| ISO 8502-8-2001
| 涂裝油漆和有關產品前鋼材的預處理 表面清潔度評定試驗 第8部分：現場水分折射測定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture
|
| ISO 8502-9-1998
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第9部分:水溶性鹽的現場電導測定法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts
|
| ISO 8503-1-1988
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第1部分:磨料噴射清理表面粗糙度的ISO評定
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
| ISO 8503-2-1988
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分:磨料噴射清理表面的粗糙度定級方法
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure
|
| ISO 8503-3-1988
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第3部分:ISO表面輪廓比較儀的校準方法和表
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure |
| ISO 8503-4-1988
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第4部分:ISO表面輪廓比較儀的校準方法和表
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure
|
| ISO 8503-5-2003
| 涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
|
| ISO 8504-1-2000
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第1部分:總則
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
|
| ISO 8504-2-2000
| 涂裝油漆和有關產品前鋼材預處理.表面預處理方法.第2部分:磨料噴射清理
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
|
| ISO 8504-3-1993
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分:手工和動力工具清洗
| Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning
|
| ISO 9587-1999
| 金屬和其他無機覆蓋層 鋼鐵為減少氫脆危險的預處理
| Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
| ISO/TR 10949-2002
| 液壓傳動.元件清潔度.從生產到安裝的過程中元件清潔度的取得和控制指南
| Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture to installation
|
| ISO/TR 15235-2001
| 涂裝油漆和有關產品前鋼材的預處理 收集的有關溶水鹽污染水平的影響的信息
| Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
|
| ISO/TS 16431-2002
| 液壓傳動.配件系統.清潔度的鑒定
| Hydraulic fluid power - Assembled systems - Verification of cleanliness
|
| 編號 | 中文名稱 | 英文名稱 |
|---|