| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 1042-1.4-1992
| 封閉管道內液體流量測量.第1部分:壓差器件.第4節:第1和2節規定器件使用指南
| Measurement of fluid flow in closed conduits - Pressure differential devices - Guide to the use of devices specified in Sections 1.1 and 1.2
|
| BS 1042-2.1-1983
| 封閉管道內液體流量測量.第2部分:速度范圍法.第1節:皮托靜壓管法
| Measurement of fluid flow in closed conduits - Velocity area methods - Method using Pitot static tubes
|
| BS 1042-2.2-1983
| 封閉管道內液體流量測量.第2部分:速度范圍法.第2節:管道橫截面某一點的流速測量方法
| Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of velocity at one point of a conduit of circular cross section
|
| BS 1042-2.3-1984
| 封閉管道內液體流量測量.第2部分:速度范圍法.第3節:用流量計或皮托靜壓管在圓形管道中渦流或不平衡流動條件
| Measurement of fluid flow in closed conduits - Velocity area methods - Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
|
| BS 1042-2.4-1989
| 封閉管道內液體流量測量.第2部分:速度范圍法.第4節:正常流動條件下利用全流動導管中的流量計測量清潔水流量
| Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
|
| BS 1306-1975
| 銅與銅合金承壓管道系統規范
| Specification for copper and copper alloy pressure piping systems
|
| BS 1553-1-1977
| 一般工程用圖形符號規范.第1部分:管道系統與裝置
| Specification for graphical symbols for general engineering - Piping systems and plant
|
| BS 1566-2-1984
| 家用銅制間接熱水罐.單管道的間接熱水罐規范
| Copper indirect cylinders for domestic purposes - Specification for single feed indirect cylinders
|
| BS 2598-4-1980
| 玻璃器皿、管道與接頭.第4部分:玻璃器皿零件規范
| Glass plant, pipeline and fittings - Specification for glass plant components
|
| BS 2633-1987
| 輸送流體用鐵素體鋼管道工程的一級電弧焊規范
| Specification for Class I arc welding of ferritic steel pipework for carrying fluids
|
| BS 2782-11 Method 1150B-1998
| 塑料試驗方法.第11部分:熱塑管,接頭和閥門.塑料管道和配件.試驗方法1150D:對接熔融法聚乙烯(PE)管/管或管道
| Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
|
| BS 2971-1991
| 輸送流體用碳鋼管道二級電弧焊規范
| Specification for class II arc welding of carbon steel pipework for carrying fluids
|
| BS 2M 53-1997
| 飛機.液壓系統.管道和管接頭熱沖擊試驗
| Aircraft - Fluid systems - Thermal shock testing of piping and fittings
|
| BS 3680-11A-1992
| 明渠流量測量.第11部分:封閉管道中自由表面流量.第11A節:測量方法
| Measurement of liquid flow in open channels - Free surface flow in closed conduits - Methods of measurement
|
| BS 3680-11B-1992
| 明渠流量測量.第11部分:封閉管道中自由表面流量.第11B節:測量設備安裝和性能規范
| Measurement of liquid flow in open channels - Free surface flow in closed conduits - Specification for performance and installation of equipment for measurement of free surface flow in closed conduits
|
| BS 3M 60-1998
| 液壓系統24度錐形可分管道接頭.通用規范
| Separable tube fittings for fluid systems, 24 ° cone - General specification
|
| BS 4508-1-1986
| 絕熱地下管道.第1部分:有氣隙的外加鋼套管系統規范
| Thermally insulated underground pipelines - Specification for steel cased systems with air gap
|
| BS 4508-4-1977
| 絕熱地下管道.無氣隙的外套管系統專門試驗及檢驗要求
| Thermally insulated underground pipelines - Specific testing and inspection requirements for cased systems without air gap
|
| BS 4515-1-2004
| 陸地和近海鋼管道焊接規范.碳及碳錳鋼管
| Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines
|
| BS 4515-2-1999
| 陸地和近海鋪設的鋼管焊接規范.雙聯法不銹鋼管道
| Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines
|
| BS 4678-1-1971
| 電纜管道.第1部分:鋼制地表管道規范
| Cable trunking - Steel surface trunking
|
| BS 4678-2-1973
| 電纜管道.第2部分:鋼制地板下管道規范
| Cable trunking - Steel underfloor (duct) trunking
|
| BS 4678-4-1982
| 電纜管道.第4部分:絕緣材料制電纜管道規范
| Cable trunking - Specification for cable trunking made of insulating material
|
| BS 476-24-1987
| 建筑材料和結構的燃燒試驗.第24部分:通風管道耐火性的測定方法
| Fire tests on building materials and structures - Method for determination of the fire resistance of ventilation ducts
|
| BS 5422-2001
| 工作溫度范圍為-40℃-+700℃的管道、水箱、容器、管道工程和設備用隔熱材料的規定方法
| Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C
|
| BS 5588 Pt.9-1989
| 建筑物設計、施工和使用中的防火措施.第9部分:通風和空調管道的實用規范
| Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork
|
| BS 5588-9-1999
| 建筑物設計、施工和使用中的防火措施.通風和空調管道工程實施規程
| Fire precautions in the design, construction and use of buildings - Code of practice for ventilation and air conditioning ductwork
|
| BS 5608-1993
| 管道工程和設備隔熱用預成型剛性聚氨基甲酸乙酯(PUR)和聚異氰尿酸酯(PIR)泡沫規范
| Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment
|
| BS 5682-1998
| 醫療用燃?xì)夤艿老到y(tǒng)探測頭(快速連接器)規范
| Specification for probes (quick connectors) for use with medical gas pipeline systems
|
| BS 5857-1.1-1980
| 密封管道中流體流量的示蹤劑測量法.第1部分:水流量測量.第1節:總則
| Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - General
|
| BS 5857-1.2-1980
| 密封管道中流體流量的示蹤劑測量法.第1部分:水流量測量.第2節:非放射性示蹤劑恒速噴射法
| Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Constant rate injection method using non-radioactive tracers
|
| BS 5857-1.3-1980
| 密封管道中流體流量的示蹤劑測量法.第1部分:水流量測量.第3節:放射性示蹤劑恒速噴射法
| Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Constant rate injection method using radioactive tracers
|
| BS 5857-1.4-1980
| 密封管道中流體流量的示蹤劑測量法.第1部分:水流量測量.第4節:非放射性示蹤劑渡越時間法
| Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Transit time method using non-radioactive tracers
|
| BS 5857-1.5-1980
| 密封管道中流體流量的示蹤劑測量法.第1部分:水流量測量.第5節:放射性示蹤劑渡越時間法
| Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Transit time method using radioactive tracers
|
| BS 5857-2.1-1980
| 密封管道中流體流量的示蹤劑測量法.第2部分:氣體流量測量.第1節:總則
| Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of gas flow - General
|
| BS 5857-2.4-1980
| 使用示蹤劑的密封管道中流體流量的測量方法.氣體流量的測量.采用放射性示蹤劑的過渡時間法
| Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of gas flow - Transit time method using radioactive tracers
|
| BS 5864-2004
| 額定輸入凈值不超過70kW的燃?xì)夤艿朗娇諝饧訜崞鞯陌惭b和維修(2類和3類燃?xì)?.規范
| Installation and maintenance of gas-fired ducted air heaters of rated input not exceeding 70 kW net (2nd and 3rd family gases) - Specification
|
| BS 5911-5-2004
| 混凝土管和輔助混凝土制品.帶軟接頭的預應力非壓力管道和配件的規范
| Concrete pipes and ancillary concrete products - Specification for prestressed non-pressure pipes and fittings with flexible joints
|
| BS 5927-1980
| 石棉水泥管道敷設指南
| Guide for laying of asbestos-cement pipelines
|
| BS 5955-6-1980
| 塑料管道工程(熱塑性塑料).第6部分:自重排水和下水道用未增塑聚氯乙烯管道工程安裝慣例
| Plastics pipework (thermoplastics materials) - Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers
|
| BS 5955-8-2001
| 塑料管道工程(熱塑性材料).家用冷、熱水設施和建筑物中加熱系統用的熱塑性塑料管道工程及其配件的安裝規范
| Plastics pipework (thermoplastics materials) - Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
|
| BS 5970-2001
| 溫度范圍從-100℃至+870℃的管道工程及設備隔熱的實施規程
| Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 °C to +870 °C
|
| BS 5M 23-1987
| 管道識別系統規范
| Specification for an identification scheme for pipelines
|
| BS 6100-2.8-1990
| 建筑和土木工程術語.第2部分:土木工程.第8集:管道和導管
| Glossary of building and civil engineering terms - Civil engineering - Pipelines and ducts
|
| BS 6199-1.2-1991
| 用稱重及體積法測定密封管道中流體流量的方法.第1部分:稱重法.第2節:靜態稱重裝置檢驗程序
| Measurement of liquid flow in closed conduits using weighing and volumetric methods - Weighing method - Procedures for checking static weighing systems
|
| BS 6209-1982
| 不加壓熱塑性管道系統用溶劑粘合劑規范
| Specification for solvent cement for non-pressure thermoplastics pipe systems
|
| BS 65-1991
| 只用于地表水管道和配件的陶管、配件、導管和撓性機械接頭規范
| Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
|
| BS 6891-2005
| 家用燃?xì)獾蛪汗艿?R1<=35mm)的安裝規范(2類燃?xì)?
| Installation of low pressure gas pipework of up to 35 mm (R1?) indomestic premises (2nd family gas) - Specification
|
| BS 6911-6-1992
| 運土機械試驗.第6部分:側面帶起重吊桿的管道敷設機和輪式拖拉機或裝載機的升降能力評定方法
| Testing earth-moving machinery - Method for the evaluation of lift capacity of pipelayers and wheel tractors or loaders equipped with side boom
|
| BS 6914-5-1999
| 土方機械術語(包括尺寸和符號的定義).管道鋪設機術語匯編
| Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Glossary for pipelayers
|
| BS 6920-2.2.2-2000
| 通過其對水質的影響確定與人類用水接觸的非金屬產品的適用性.試驗方法.水的氣味和味道.用軟管、合成管及管
| Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes - Section 2.2: Taste of water Sub-section 2.2.2: Method of testing tastes imparted to water by hoses
|
| BS 6946-1988
| 電氣設備用金屬管道電纜支撐系統規范
| Specification for metal channel cable support systems for electrical installations
|
| BS 7121-14-2005
| 起重機安全操作實施規程.起重機側臂管道敷設機
| Code of practice for safe use of cranes - Part 14: Side boom pipelayers
|
| BS 7159-1989
| 特殊工廠或工地用玻璃纖維增強塑料管道系統的設計和建造實用規程
| Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites
|
| BS 7405-1991
| 封閉管道液體流量測量用流量計選擇和應用指南
| Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
|
| BS 7523-1991
| 管道熱絕緣用預成形多孔聚乙烯材料規范
| Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework
|
| BS 7576-1992
| 液化天然氣的輸送管道連續取樣方法
| Method for continuous sampling of liquefied natural gas (LNG) in transfer pipelines
|
| BS 7634-1993
| 醫療用氣體管道系統用氧化濃縮器規范
| Specification for oxygen concentrators for use with medical gas pipeline systems
|
| BS 7677-1993
| 管道接頭用密封圈缺陷分類推薦標準
| Recommendations for classification of imperfections in pipe joint rings
|
| BS 7797-1998
| 使用金屬屏蔽元件的工業管道加熱器規范
| Specification for industrial duct heaters using metal-sheathed elements
|
| BS 7834-1995
| 密閉管道氣流測量用渦輪表規范
| Specification for turbine meters used for the measurement of gas flow in closed conduits
|
| BS 7838-1996
| 直徑達到28 mm的低壓氣體管道系統用的波紋狀不銹鋼半硬式管材和有關配件規范
| Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to 28 mm
|
| BS 7874-1998
| 管道工程和管線系統連接的彈性密封件微生物損害的試驗方法
| Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
|
| BS 8010-2.1-1987
| 管道的實用規程.陸地管道:設計、制造和安裝.可鍛鐵管
| Code of practice for pipelines - Pipelines on land: design, construction and installation - Ductile iron
|
| BS 8010-2.3-1989
| 管道實用規程.陸上管道:設計、制造和安裝.石棉水泥管
| Code of practice for pipelines. Pipelines on land: design, construction and installation. Asbestos cement
|
| BS 8010-2.4-1988
| 管道實用規程.陸上管道:設計、制造和安裝.預應力混凝土承壓管
| Code of practice for pipelines. Pipelines on land: design, construction and installation. Prestressed concreted pressure pipelines
|
| BS 8010-2.5-1989
| 管道的實用規程.第2部分:陸地管道:設計、制造和安裝.第5節:玻璃纖維加強的熱固性塑料制品
| Code of practice for pipelines - Pipelines on land: design, construction and installation - Glass reinforced thermosetting plastics
|
| BS 8010-2.7-1989
| 管道實用規程.陸上管道:設計、制造和安裝.預鑄混凝土管
| Code of practice for pipelines. Pipelines on land: design, construction and installation. Precast concrete
|
| BS 8313-1997
| 建筑物管道使用方便實施實用規程
| Code of practice for accommodation of building services in ducts
|
| BS C 18-1976
| 航空用管道和導管用V形法蘭聯結器規范.公制系列
| Specification for V-flange couplings for aircraft piping and ducting - metric series
|
| BS CP 312-1-1973
| 塑料管道(熱塑性材料)實施規程.一般原則和材料的選擇
| Code of practice for plastics pipework (thermoplastics material) - General principles and choice of material
|
| BS CP 312-2-1973
| 塑料管道(熱塑性材料)實施規程. 承壓下液體輸送用的未增塑的聚氯乙烯(PVC)管道
| Code of practice for plastics pipework (thermoplastics material) - Unplasticized PVC pipework for the conveyance of liquids under pressure
|
| BS DD CEN/TS 12200-2-2003
| 地上外部用塑料雨水管道系統.未增塑聚氯乙烯管.符合性評定指南
| Plastics rainwater piping systems for above ground external use - Unplasticized poly (vinyl chloride) (PVC-U) - Guidance for the assessment of conformity
|
| BS DD CEN/TS 12201-7-2004
| 給水用塑料管道設備.聚乙烯(PE).合格評定指南
| Plastics piping systems for water supply - Polyethylene (PE) - Guidance for the assessment of conformity
|
| BS DD CEN/TS 12666-2-2006
| 非承壓地下排放和污水用塑料管道系統.聚乙烯(PE).符合性評定指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity
|
| BS DD CEN/TS 13244-7-2004
| 排水和污水處理通用地下和地上壓力設備用塑料管道系統.聚乙烯(PE).符合性評定指南
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity
|
| BS DD CEN/TS 1456-2-2003
| 壓力下直埋式和地上排水和排污用塑料管道系統.未增塑聚氯乙烯(PVC-U).合格評定指南
| Plastic piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity
|
| BS DD CEN/TS 14578-2003
| 給水或排水和下水道用塑料管道系統.基于不飽和聚酯樹脂(UP)的玻璃纖維增強熱固性塑料(GPR).安裝的推薦實施
| Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation
|
| BS DD CEN/TS 1555-7-2004
| 供應氣體燃料用塑料管道系統.聚乙烯(PE).合格評定指南
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Guidance for the assessment of conformity
|
| BS DD CEN/TS 1852-3-2003
| 非壓力地下排水和排污塑料管道系統.聚丙烯(PP).安裝指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for installation
|
| BS DD CLC/TS 50430-2005
| 光纜.燃?xì)夤艿离娎|.高壓燃?xì)夤艿离娎|的系列規范
| Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes
|
| BS DD CLC/TS 50431-2005
| 光纜.飲用水管道電纜.飲用水管道電纜的系列規范
| Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes
|
| BS DD ENV 12108-2001
| 塑料管道系統.建筑物內部人消費用冷熱水的壓力系統的安裝指南
| Plastics piping systems - Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
|
| BS DD ENV 1329-2-2001
| 建筑內污物污水排放(高、低溫)用塑料管道系統.未增塑的聚氯乙烯(PVC-U).符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity
|
| BS DD ENV 13801-2001
| 建筑物內污物污水排放(低溫和高溫)用塑料管道系統.熱塑管.推薦的安裝實施規程
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
|
| BS DD ENV 1401-2-2001
| 非承壓地下排放和污水用塑料管道系統.未增塑的聚氯乙烯(PVC-U).符合性評定指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for assessment of conformity
|
| BS DD ENV 1401-3-2001
| 非承壓地下排放和污水用塑料管道系統.未增塑的聚氯乙烯(PVC-U).安裝指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for installation
|
| BS DD ENV 1451-2-2001
| 建筑物內污物和污水排放(高、低溫)用塑料管道系統.聚丙烯(PP).符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Guidance for the assessment of conformity
|
| BS DD ENV 1452-6-2002
| 供水用的塑料管道系統.未增塑的聚氯乙烯(PVC-U).安裝指南
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for installation
|
| BS DD ENV 1452-7-2001
| 供水用的塑料管道系統.未增塑的聚氯乙烯(PVC-U).符合性評定指南
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity
|
| BS DD ENV 1453-2-2001
| 建筑物內污物和廢水排放(高、低溫)用帶結構壁管的塑料管道系統.未增塑的聚氯乙烯(PVC-U).符合性評定指南
| Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity
|
| BS DD ENV 1455-2-2001
| 建筑物內污物污水排放(高、低溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物(ABS).符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene- styrene (ABS) - Guidance for the assessment of conformity
|
| BS DD ENV 1519-2-2001
| 建筑物內污物污水排放(高、低溫)用塑料管道系統.聚乙烯(PE).符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Guidance for the assessment of conformity
|
| BS DD ENV 1565-2-2001
| 建筑物內污物廢水排放(高、低溫)用塑料管道系統.苯乙烯共聚物混合物(SAN + PVC).符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Guidance for the assessment of conformity
|
| BS DD ENV 1566-2-2001
| 建筑物內污物污水排放(高、低溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Guidance for the assessment of conformity
|
| BS DD ENV 1852-2-2001
| 非承壓地下排放和污水用塑料管道系統.聚丙烯（PP).符合性評定指南
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity
|
| BS DD ENV 1998-4-1999
| 歐洲法規 8:抗地震結構件的設計條例.筒倉、罐和管道
| Eurocode 8: Design provisions for earthquake resistance of structures - Silos, tanks and pipelines
|
| BS DD ENV 737-6-2003
| 醫用氣體管道系統.壓縮醫用氣體終端設備和真空終端設備用探針的尺寸和定位
| Medical gas pipeline systems - Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum
|
| BS EN 10242-1995
| 可鍛鑄鐵的螺紋管道配件
| Threaded pipe fittings in malleable cast iron
|
| BS EN 10253-1-1999
| 對接焊管道接頭.通用和無特殊檢驗要求的鍛制碳鋼
| Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements
|
| BS EN 10288-2002
| 岸上和近海管道用鋼管及配件.外部的雙層擠壓聚乙烯基涂層
| Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
|
| BS EN 10289-2002
| 岸上和近海管道用鋼管和配件.外用液體涂刷的環氧涂料及環氧改性的涂料
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
|
| BS EN 10301-2003
| 岸上及海底管道用鋼管及配件.非腐蝕性氣體的輸送用減少摩擦的內涂層
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
|
| BS EN 10329-2006
| 海上或離岸管道用鋼管和管件.外部連接包覆層
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
|
| BS EN 1053-1996
| 塑料管道系統.無壓力情況下使用的熱塑管道系統.防水性的檢驗方法
| Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test methods for watertightness
|
| BS EN 1054-1996
| 塑料管道系統.建筑物內糞水和污水排放下水道用熱塑管道系統.連接件的氣密性試驗方法
| Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
|
| BS EN 1055-1996
| 塑料管道系統.建筑物內糞水污排放用熱塑制管道系統.耐高溫度循環的試驗方法
| Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
|
| BS EN 1056-1996
| 塑料管道系統.塑料管道和配件.直接(自然)風化的方法
| Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering
|
| BS EN 1092-3-2004
| 法蘭及其連接件.標注PN的管道、閥門、配件和附件用圓形法蘭.銅合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges
|
| BS EN 1092-4-2002
| 法蘭及其連接件.按PN標注的管道、閥門、配件和附件用圓形法蘭.鋁合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges
|
| BS EN 1119-1996
| 塑料管道系統.玻璃增強的熱固塑料管和配件.撓性和還原接合接頭密封性和耐損傷性試驗方法
| Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints
|
| BS EN 1120-1996
| 塑料管道系統.玻璃增強的熱固塑料管和配件.偏離規定條件下部件內部耐化學侵蝕性能的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
|
| BS EN 1124-2-1999
| 廢水系統用插接式縱向焊接不銹鋼管道和配件.系統5.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S. Dimensions
|
| BS EN 12056-2-2000
| 建筑物內部的自流排水系統.衛生管道設計和計算
| Gravity drainage systems inside buildings - Sanitary pipework, layout and calculation
|
| BS EN 12061-1999
| 塑料管道系統.熱塑配件.耐沖擊試驗方法
| Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
|
| BS EN 12095-1997
| 塑料管道系統.雨水管道系統用托架.托架強度試驗方法
| Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength
|
| BS EN 12099-1997
| 塑料管道系統.聚乙烯管材和組件.揮發物價改革含量的測定
| Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
|
| BS EN 12100-1998
| 塑料管道系統.聚乙稀(PE)閥門.閥座間抗彎曲性的試驗方法
| Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
|
| BS EN 12106-1998
| 塑料管道系統.聚乙稀(PE)閥門.擠壓后抗內壓力的試驗方法
| Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
|
| BS EN 12107-1998
| 塑料管道系統.注射模塑熱塑性塑料管件、閥門和輔助設備.注射模塑管道元件用熱塑性材料的長期液壓強度的測定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
|
| BS EN 12117-1998
| 塑料管道系統.管件、閥門和附件.氣體流速與壓降之間關系的測定
| Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
|
| BS EN 12118-1998
| 塑料管道系統.用庫侖分析法測定熱塑性塑料中的水含量
| Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
|
| BS EN 12119-1997
| 塑料管道系統.聚乙烯(PE)閥.耐力熱循環抗性的測試方法
| Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
|
| BS EN 12200-1-2000
| 地上外部用塑料雨水管道系統.未增塑聚氯乙烯.管道、配件和系統規范
| Plastics rainwater piping systems for above ground external use - Unplasticized poly (vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
|
| BS EN 12201-1-2003
| 供水用塑料管道系統.聚乙烯.總則
| Plastic piping systems for water supply - Polyethylene (PE) - General
|
| BS EN 12201-2-2003
| 供水用塑料管道系統.聚乙烯.管道
| Plastic piping systems for water supply - Polyethylene (PE) - Pipes
|
| BS EN 12201-3-2003
| 供水用塑料管道系統.聚乙烯.配件
| Plastic piping systems for water supply - Polyethylene (PE) - Fittings
|
| BS EN 12201-4-2002
| 供水用塑料管道系統.聚乙烯.閥門
| Plastic piping systems for water supply - Polyethylene (PE) - Valves
|
| BS EN 12201-5-2003
| 供水用塑料管道系統.聚乙烯.系統目的的適應性
| Plastic piping systems for water supply - Polyethylene (PE) - Fitness for purpose of the system
|
| BS EN 12220-1998
| 建筑物通風.管道作業.一般通風用圓法蘭
| Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation
|
| BS EN 12236-2002
| 建筑物的通風.管道懸吊裝置和支架.強度要求
| Ventilation for buildings - Ductwork hangers and supports - Requirements for strength
|
| BS EN 12237-2003
| 建筑物的通風.管道系統.圓薄金屬管道的強度和泄漏
| Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
|
| BS EN 1225-1996
| 塑料管道系統.玻璃增強的熱固性塑料管.潮濕條件下蠕變因數的測定和長期特定環狀物剛度的計算
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
|
| BS EN 12256-1998
| 塑料管道系統.熱塑配件.纖維配件機械強度和柔韌性試驗方法
| Plastic piping systems - Thermoplastic fittings - Test method for mechanical strength or flexibility of fabricated fittings
|
| BS EN 1226-1996
| 塑料管道系統.玻璃增強的熱固性塑料管.驗證抗初期環狀物撓曲的試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
|
| BS EN 1227-1998
| 塑料管道系統.玻璃增強熱固性塑料(GRP)管.潮濕條件下長期極限相對環形偏差值的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions
|
| BS EN 1228-1997
| 塑料管道系統.玻璃纖維的增強熱固塑料(GFK).特定初始環狀剛性測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
|
| BS EN 1229-1997
| 塑料管道系統.玻璃增強的熱固性塑料管.驗證短期內部壓力下墻的密封性試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
|
| BS EN 12293-2000
| 塑料管道系統.熱水和冷水用熱塑管和配件.已安裝的組件耐溫度變化性能的試驗方法
| Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
|
| BS EN 12294-2000
| 塑料管道系統.熱水和冷水系統.真空滲漏性試驗方法
| Plastic piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
|
| BS EN 12295-2000
| 塑料管道系統.熱水和冷水用熱塑管和附屬配件.連接件耐壓力變化的試驗方法
| Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
|
| BS EN 12308-1998
| 液化天然氣設施和設備.用于液化天然氣管道的法蘭接頭墊圈設計適配性試驗
| Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
|
| BS EN 12474-2001
| 海底管道的陰極保護
| Cathodic protection for submarine pipelines
|
| BS EN 12514-2-2000
| 油燃燒器供油系統的安裝.安全性要求和試驗.部件、閥門、管道、過濾器、油空氣分離器、油量計
| Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
|
| BS EN 12585-1999
| 玻璃裝置、管道和管件.DN 15至DN 1000的管道和管件.兼容性和可互換性
| Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability
|
| BS EN 12613-2001
| 具有視覺特征的地下電纜和管道用塑料警告裝置
| Plastic warning devices for underground cables and pipelines with visual characteristics
|
| BS EN 12735-1-2001
| 銅和銅合金.空調和制冷用無縫圓銅管.管道系統用管
| Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Tubes for piping systems
|
| BS EN 1277-2004
| 塑料管道系統.地下無壓用熱塑性管道系統.彈性密封環型接頭密封性的試驗方法
| Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
|
| BS EN 12842-2000
| PVC-U或PE管道系統用球墨鑄鐵配件.要求和試驗方法
| Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
|
| BS EN 1295-1-1998
| 不同負荷條件下地下管道的結構設計.一般要求
| Structural design of buried pipelines under various conditions of loading - Part 1:General requirements
|
| BS EN 12954-2001
| 埋于土內或浸于液體的金屬結構的陰極保護.管道應用和一般原則
| Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines
|
| BS EN 13052-1-2001
| 材料對人生活用水的影響.有機物質.管道系統中水的顏色和濁度的測定.試驗方法
| Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Test method
|
| BS EN 13090-2000
| 建筑物內氣體管道的螺紋接頭重新密封方法
| Means for resealing threaded joints of gas pipework in buildings
|
| BS EN 13136-2001
| 滅火系統和熱力泵.釋壓裝置和配套管道.計算方法
| Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
|
| BS EN 13141-8-2006
| 建筑物的通風.住宅通風用部件/產品的性能試驗.獨戶住宅機械通風系統用非管道機械供氣和排氣通風裝置(包括熱
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
|
| BS EN 13220-1999
| 醫用燃?xì)夤艿老到y(tǒng)終端元件連接用流量計裝置
| Flow-metering devices for connection to terminal units of medical gas pipeline systems
|
| BS EN 13244-1-2003
| 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.總則
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - General
|
| BS EN 13244-2-2003
| 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.管道
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Pipes
|
| BS EN 13244-3-2003
| 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.配件
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fittings
|
| BS EN 13244-4-2003
| 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.閥門
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves
|
| BS EN 13244-5-2003
| 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.系統目的的適合性
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fitness for purpose of the system
|
| BS EN 1329-1-2000
| 建筑物結構內糞水和廢水排放(低和高溫)用塑料管道系統.未增塑的聚氯乙烯(PVC-U).管道,配件和系統規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
|
| BS EN 13312-1-2001
| 生物技術.管道和儀表性能標準.一般性能標準
| Biotechnology - Performance criteria for piping and instrumentation - General performance criteria
|
| BS EN 13312-2-2001
| 生物技術.管道和儀表性能標準.耦合
| Biotechnology - Performance criteria for piping and instrumentation - Couplings
|
| BS EN 13312-3-2001
| 生物技術.管道和儀表性能標準.取樣和接種裝置
| Biotechnology - Performance criteria for piping and instrumentation - Sampling and inoculation devices
|
| BS EN 13312-4-2001
| 生物技術.管道和儀表性能標準.管和管道
| Biotechnology - Performance criteria for piping and instrumentation - Tubes and pipes
|
| BS EN 13312-5-2001
| 生物技術.管道和儀表性能標準.閥門
| Biotechnology - Performance criteria for piping and instrumentation - Valves
|
| BS EN 13312-6-2001
| 生物技術.管道和儀表性能標準.設備探頭
| Biotechnology - Performance criteria for piping and instrumentation - Equipment probes
|
| BS EN 13403-2003
| 建筑物通風.非金屬管道.絕緣制管板制成的管道
| Ventilation for buildings - Non metallic ducts - Ductwork made from insulation ductboards
|
| BS EN 13461-2001
| 包裝.圓柱柔性疊層板管道.尺寸和公差
| Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
|
| BS EN 13480-1-2002
| 金屬制工業管道.總則
| Metallic industrial piping - General
|
| BS EN 13480-2-2002
| 金屬制工業管道.材料
| Metallic industrial piping - Materials
|
| BS EN 13480-3-2002
| 金屬工業管道.設計和計算
| Metallic industrial piping - Design and calculation
|
| BS EN 13480-4-2002
| 金屬制工業管道.制造和安裝
| Metallic industrial piping - Fabrication and installation
|
| BS EN 13480-5-2002
| 金屬制工業管道.檢測和試驗
| Metallic industrial piping - Inspection and testing
|
| BS EN 13480-6-2004
| 金屬工業管道.埋管的附加要求
| Metallic industrial piping - Additional requirements for buried piping
|
| BS EN 13544-2-2002
| 呼吸治療設備.管道和連接件
| Respiratory therapy equipment - Tubing and connectors
|
| BS EN 13566-1-2003
| 地下無壓排水管網和污水管網翻新用塑料管道系統.總則
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - General
|
| BS EN 13566-3-2003
| 地下無壓排水管網和污水管網翻新用塑料管道系統.緊密配合管加襯
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with close fit pipes
|
| BS EN 13566-4-2003
| 地下無壓排水管網和污水管網翻新用塑料管道系統.現場加工管襯里
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes
|
| BS EN 13598-1-2003
| 無壓力地下排水和排污用塑料管道系統.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE).第1部分:包括淺層檢
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Specifications for ancillary fittings including shallow inspection chambers
|
| BS EN 13636-2004
| 地下金屬罐和相關管道的陰極保護
| Cathodic protection of buried metallic tanks and related piping
|
| BS EN 1366-1-1999
| 服務設施的耐火試驗.管道
| Fire resistance tests for service installations - Fire resistance tests for service installations - Ducts
|
| BS EN 13675-2004
| 機械安全.管道成型和軋制機及其精整作業線設備的安全要求
| Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
|
| BS EN 13689-2003
| 改建用塑料管道系統的分類和設計指南
| Guidance on the classification and design of plastics piping systems used for renovation
|
| BS EN 1393-1997
| 塑料管道系統.玻璃增強熱固性塑料(GRP)管.初始軸向拉伸特性的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
|
| BS EN 1394-1997
| 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管.外表初始圓周抗拉強度的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
|
| BS EN 13941-2003
| 直接采暖用的粘結預隔熱層管道系統的設計和安裝
| Design and installation of preinsulated bonded pipe systems for direct heating
|
| BS EN 13942-2003
| 石油和天然氣工業.管道輸送.管道閥
| Petroleum and natural gas industries - Pipeline transportation - Pipeline valves
|
| BS EN 1401-1-1998
| 不承壓地下雨水管和污水管用塑料管道系統.未增塑聚氯乙烯(PVC-U).管道、配件和系統規范
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system
|
| BS EN 14125-2005
| 汽油加油站的地下裝置用熱塑柔性金屬管道
| Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
|
| BS EN 14141-2003
| 天然氣輸送用管道閥.性能要求和試驗
| Valves for natural gas transportation in pipelines - Performance requirements and tests
|
| BS EN 14161-2003
| 石油和天然氣工業.管道輸送系統
| Petroleum and natural gas industries - Pipeline transportation systems
|
| BS EN 14163-2001
| 石油和天然氣工業.管道運輸系統.管道焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
|
| BS EN 1420-1-1999
| 有機材料對供人用的水的影響.管道系統中水氣味的測定.第1部分:試驗方法
| Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method
|
| BS EN 14239-2004
| 建筑物通風.管道系統.管道系統表面積的測量
| Ventilation for buildings - Ductwork - Measurement of ductwork surface area
|
| BS EN 1437-2003
| 塑料管道系統.地下排水排污用管道系統.耐組合溫度循環和外加負荷的試驗方法
| Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
|
| BS EN 1444-2001
| 纖維水泥管道.管道敷設和現場施工指南
| Fibre-cement pipelines - Guide for laying and on-site work practices
|
| BS EN 1446-1996
| 塑料管道及保護管系統.熱塑管.環形撓形測定
| Plastics piping and ducting systems.Thermoplastics pipes - Determination of ring flexibility
|
| BS EN 1447-1997
| 塑料管道系統.玻璃增強的熱固性塑料管道.長期耐內壓能力的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
|
| BS EN 1448-1997
| 塑料管道系統.玻璃增強的熱固塑料(GRP)組件.帶彈性密封件的剛性鎖緊插承接合的設計驗證試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals
|
| BS EN 1449-1997
| 塑料管道系統.玻璃纖維增強的熱固性塑料(GRP)元件.混凝土套管插承接合的設計驗證試驗方法
| Plastics piping systems - Glass reinforced thermosetting plastics (GRP) components - Test methods to prove the design of cemented socket-and-spigot joints
|
| BS EN 1450-1997
| 塑料管道系統.玻璃增強的熱固塑料(GRP)布件.螺栓法蘭連接的設計驗證試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints
|
| BS EN 1451-1-2000
| 建筑物結構內糞水和廢水排出(低和高溫)用塑料管道系統.聚丙烯(PP).管道,配件和系統規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Specifications for pipes, fittings and the system
|
| BS EN 1452-1-2000
| 供水塑料管道系統.非增塑的聚氯乙烯(PVC-U).通則
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - General
|
| BS EN 1452-2-2000
| 供水塑料管道系統.非增塑的聚氯乙烯(PVC-U).管材
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Pipes
|
| BS EN 1452-3-2000
| 供水塑料管道系統.非增塑的聚氯乙烯(PVC-U).配件
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Fittings
|
| BS EN 1452-4-2000
| 供水塑料管道系統.非增塑的聚氯乙烯(PVC-U).閥門和附屬設備
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment
|
| BS EN 1452-5-2000
| 供水塑料管道系統.非增塑的聚氯乙烯(PVC-U).對系統的適用性
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Fitness for purpose of the system
|
| BS EN 14525-2005
| 不同材料管道用球墨鑄鐵大公差聯接器和法蘭接頭:球墨鑄鐵、灰鑄鐵、鋼、PVC-U、PE和纖維水泥
| Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
|
| BS EN 1453-1-2000
| 建筑物內糞水和廢水排放(低和高溫)用的結構墻壁管道的塑料管道系統.非增塑的聚氯乙烯(PVC-U)的管道和系統規
| Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly (vinyl chloride) (PVC-U) - Specifications for pipes and the system
|
| BS EN 1455-1-2000
| 建筑物結構內的污物和廢水(低和高溫)排出用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物.管道,配件和系統規范
| Plastics piping systems for soil and waste (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Specifications for pipes, fittings and the system
|
| BS EN 1456-1-2001
| 地下埋設的和地上鋪設的承壓排水和排污用塑料管道系統.未增塑的聚氯乙烯(PVC-U).管道部件和系統的規范
| Plastic piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for piping components and the system
|
| BS EN 14741-2006
| 熱塑管和管道系統.非壓力掩埋用接頭.通過評估密封壓力測定彈性密封件接合處的長期密封性能的試驗方法
| Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure |
| BS EN 14870-1-2004
| 石油和天然氣工業.管道運輸系統的感應管彎頭、配件和法蘭.感應管彎頭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Induction bends
|
| BS EN 14870-2-2005
| 石油和天然氣工業.管道運輸系統的吸入管彎頭、配件和法蘭.配件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Fittings
|
| BS EN 14870-3-2006
| 石油和天然氣工業.管道運輸系統的吸入管彎頭、配件和法蘭.法蘭
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
|
| BS EN 1519-1-2000
| 建筑物結構內糞水和廢水排出(低和高溫)用塑料管道系統.聚乙烯(PE).管道,配件和系統規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Specifications for pipes, fittings and the system
|
| BS EN 1555-1-2004
| 供應氣體燃料用塑料管道系統.聚乙烯(PE).總則
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - General
|
| BS EN 1555-2-2004
| 供應氣體燃料用塑料管道系統.聚乙烯(PE).管道
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Pipes
|
| BS EN 1555-3-2004
| 供應氣體燃料用塑料管道系統.聚乙烯(PE).配件
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Fittings
|
| BS EN 1555-4-2004
| 供應氣體燃料用塑料管道系統.聚乙烯(PE).閥門
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves
|
| BS EN 1555-5-2004
| 供應氣體燃料用塑料管道系統.聚乙烯(PE).系統的適用性
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Fitness for the purpose of the system
|
| BS EN 1565-1-2000
| 建筑物結構內糞水和廢水排放(低和高溫)用塑料管道系統.苯乙烯共聚物混合物(SAN+PVC).管道,配件和系統規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Specifications for pipes, fittings and the system
|
| BS EN 1566-1-2000
| 建筑物結構內的污物和廢水(低和高溫)排放用塑料管道系統.氯化聚偏二氯乙烯(PVC-C).管道,配件和系統規范
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Specification for pipes, fittings and the system
|
| BS EN 1594-2000
| 燃?xì)夤?yīng)系統.最大工作壓力超過16巴的氣體管道.功能要求
| Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements
|
| BS EN 1617-1997
| 一次用滅菌導液管道和輔助裝置.
| Sterile drainage catheters and accessory devices for single use
|
| BS EN 1638-1997
| 塑料管道系統.玻璃增強的熱固塑料管道(GRP).柱狀內壓效果的試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure
|
| BS EN 1680-1997
| 塑料軟管系統.聚乙烯(PE)管道系統用的閥門.彎曲力施加在工作機構上和之后的密封性的檢驗方法
| Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
|
| BS EN 1704-1997
| 塑料管道系統.熱塑料管閥.彎曲情況下溫度循環后閥門完整性的試驗方法
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
|
| BS EN 1705-1997
| 塑料管道系統.熱塑性閥門.經過外部沖擊后閥門的完整性試驗方法
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
|
| BS EN 1716-1997
| 塑料管道系統.聚乙烯(PE)開孔三通件.安裝好的開孔三通上抗沖擊應力檢測方法
| Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee
|
| BS EN 1759-3-2004
| 法蘭及其連接件.標注等級的管道、閥門、配件和附件用圓形法蘭.銅合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges
|
| BS EN 1759-4-2003
| 法蘭及其連接件.標注等級的管道、閥門、配件及附件用圓形法蘭.鋁合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges
|
| BS EN 1775-1998
| 燃?xì)夤?yīng).建筑物中的燃?xì)夤艿?最大工作壓力為5BAR.功能性推薦標準
| Gas supply - Gas pipework in buildings - Maximum operating pressure 5 bar - Functional recommendations
|
| BS EN 1852-1-1998
| 無壓地下排水管和下水道用塑料管道系統.聚丙烯(PP).管道,管配件及系統規范
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Specifications for pipes, fittings and the system
|
| BS EN 1861-1998
| 制冷系統和熱力泵.系統流量圖,管道和設備圖.布局和符號
| Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols
|
| BS EN 1862-1998
| 塑料管道系統.玻璃增強熱固性塑料管(GRP).暴露于化學環境后相關蠕變系數的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment
|
| BS EN 187105-2002
| 單膜光纖電纜(管道/直接掩埋設備)
| Single mode optical cable (duct/direct buried installation)
|
| BS EN 1905-1999
| 塑料管道系統.未增塑聚氯乙烯管、配件和材料.基于氯的總含量評估聚氯乙烯含量的方法
| Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
|
| BS EN 1946-5-2000
| 建筑產品和構件的熱性能.試驗室測量熱傳遞性能評估的特殊標準.通過管道試驗方法測量
| Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Measurements by pipe test methods
|
| BS EN 1979-1999
| 塑料管道和管道系統.熱塑螺旋型結構壁的管道.接縫拉伸強度測定
| Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
|
| BS EN 1989-2000
| 熱塑管道系統.地下埋裝的非承壓污水設施用連接件.通過對密封壓力的估計對帶熱塑彈力密封件的連接件的長期密
| Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
|
| BS EN 24006-1991
| 封閉管道中液體流量測量.詞匯和符號
| Measurement of fluid flow in closed conduits - Vocabulary and symbols
|
| BS EN 24185-1981
| 封閉管道中流體流量測量.稱重法
| Measurement of fluid flow in closed conduits - Weighing method
|
| BS EN 253-2003
| 區域供暖管道.直埋式熱水供應網用預先絕熱包覆的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層的鋼管用組件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN 274-1-2002
| 衛生器具用廢水管道連接件.要求
| Waste fittings for sanitary appliances - Requirements
|
| BS EN 274-3-2002
| 衛生器具用廢水管道連接件.質量控制
| Waste fittings for sanitary appliances - Quality control
|
| BS EN 288-9-1999
| 金屬材料焊接程序的規范和批準.傳輸管道的陸地和海岸現場對焊管道的焊接程序試驗
| Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
|
| BS EN 29104-1991
| 封閉管道中液體流量測量.液體電磁流量計性能評定方法
| Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
|
| BS EN 295-10-2005
| 排水和污水管道用陶土管、配件及管連接件.性能要求
| Vitrified clay pipes and fittings and pipe joints for drains and sewers - Performance requirements
|
| BS EN 448-2003
| 區域供暖管道.直埋式熱水供應網用預先絕熱包覆的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層鋼管用成套配
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN 45510-7-1-2000
| 發電站設備采購指南.管道系統和閥門.高壓管道系統.第1節:高壓管道系統
| Guide for the procurement of power station equipment - Pipework and valves - High pressure piping systems - Section 1: High pressure piping systems
|
| BS EN 45510-7-2-2000
| 發電站設備采購指南.管道系統和閥門.鍋爐和高壓閥門.第2節:鍋爐和高壓閥門
| Guide for the procurement of power station equipment - Pipework and valves - Boiler and high pressure valves - Section 2: Boiler and high pressure valves
|
| BS EN 474-9-1998
| 土方機械.安全性.管道敷設設備的要求
| Earth-moving machinery - Safety - Requirements for pipelayers
|
| BS EN 476-1998
| 排水管道的部件、重力系統的排水管和下水管的一般要求
| General requirements for components used in discharge pipes, drains and sewers for gravity systems
|
| BS EN 488-2003
| 區域供暖管道.直埋式熱水供應網用預先絕熱包覆的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層鋼管用鋼閥門
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN 489-2003
| 區域供暖管道.直埋式熱水管網用預先絕熱有包覆管層的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層的鋼管用
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN 50085-2-3-2001
| 電氣裝置用電纜導管和電纜管道系統.配電箱內安裝的線槽電纜主干系統專門要求.第3節:配電箱內開槽
| Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets
|
| BS EN 50086-2-4-1994
| 電氣裝置用導管系統規范.第2-4部分:地下管道系統專門要求
| Specification for conduit systems for cable management - Particular requirements - Conduit systems buried underground
|
| BS EN 50249-2003
| 地下管道和電纜用電磁波監測器.性能和安全
| Electromagnetic locators for buried pipes and cables - Performance and safety
|
| BS EN 50406-2-2004
| 高比特率電信網絡用端用戶多組電纜.管道和地下電纜
| End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables
|
| BS EN 512-1995
| 纖維水泥制品.壓力管道和接頭
| Fibre-cement products - Pressure pipes and joints
|
| BS EN 545-2002
| 水管道用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法
| Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
|
| BS EN 579-1994
| 塑料管道系統.交聯聚乙烯(PE-X)管.用溶劑萃取法測定交聯密度
| Plastics piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction
|
| BS EN 580-2003
| 塑料管道系統.未增塑聚氯乙烯(PVC-U)管.特定溫度下耐二氯甲烷的試驗方法
| Plastics piping Systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test methods for the resistance to dichloromethane at a specified temperature (DCMT)
|
| BS EN 588-1-1997
| 下水管和排水道用纖維水泥管.第1部分:重力管路系統用管道、管連接件和管配件
| Fibre-cement pipes for sewers and drains - Pipes, joints and fittings for gravity systems
|
| BS EN 637-1995
| 塑料管道系統.玻璃纖維增強塑料部件.用重量法測定組分量
| Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
|
| BS EN 642-1995
| 包括接頭、配件和管道預應力鋼特殊要求的圓柱型和非圓柱型預應力混凝土壓力管
| Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
|
| BS EN 705-1995
| 塑料管道系統.玻璃增強熱固性(GRP)塑料管和配件.回歸分析及其使用方法
| Plastics piping systems - Glass-reinforced thermosetting (GRP) pipes and fittings - Methods for regression analyses and their use
|
| BS EN 712-1995
| 熱塑管道系統.壓力管和配件之間端部承載的機械接合.在恒定徑向力下抗拔出性能的試驗方法
| Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
|
| BS EN 713-1995
| 塑料管道系統.管件和聚烯烴壓力管的機械連接.組件承受彎曲作用時內部壓力密封性的試驗方法
| Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
|
| BS EN 714-1995
| 熱塑管道系統.壓力管和模塑管件的無端負荷彈性密封環型連接件.在無軸向推力時內部流體靜壓力下密封性的試驗
| Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust
|
| BS EN 715-1995
| 熱塑管道系統.小直徑壓力管和配件間端部負荷軸承接頭.在包含端推力的內部水壓下密封性的試驗方法
| Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
|
| BS EN 723-1996
| 銅和銅合金.銅管道和接頭的內表面積碳測定的燃燒方法
| Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings
|
| BS EN 727-1995
| 塑料管道和管道系統.熱塑性塑料管和配件.維卡(vicat)軟化溫度的測定
| Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
|
| BS EN 728-1997
| 塑料管和管道系統.聚烯烴管和配件.氧化誘導時間的測定
| Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
|
| BS EN 737-1-1998
| 醫療氣體管道系統.壓縮醫療氣體用和真空用終端設備
| Medical gas pipeline systems - Terminal units for compressed medical gases and vacuum
|
| BS EN 737-2-1998
| 醫療氣體管道系統.麻醉氣體凈化處理系統.基本要求
| Medical gas pipeline systems - Anaesthetic gas scavenging disposal systems - Basic requirements
|
| BS EN 737-3-2000
| 醫療用氣體管道系統.壓縮醫療氣體和真空管道
| Medical gas pipeline systems - Pipelines for compressed medical gases and vacuum
|
| BS EN 737-4-1998
| 醫療氣體管道系統.麻醉氣體凈化系統的端部設備
| Medical gas pipeline systems - Terminal units for anaesthetic gas scavenging systems
|
| BS EN 738-2-1999
| 醫用氣體用的壓力調節器.供氣支管壓力調節器和輸氣管道壓力調節器
| Pressure regulators for use with medical gases - Manifold and line pressure regulators
|
| BS EN 744-1996
| 塑料管道和導管系統.熱塑管.抗日夜外部連續沖擊應力的試驗方法
| Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
|
| BS EN 761-1995
| 塑料管道系統.玻璃纖維增強熱固性塑料管.干燥條件下蠕變系數的測定
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
|
| BS EN 773-1999
| 液壓壓力排氣管、排水管和污水管道中使用部件的一般要求
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
|
| BS EN 802-1995
| 塑料管和管道系統.壓力管道系統的注射鑄造熱塑性部件.最大擠壓變形試驗方法
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
|
| BS EN 803-1995
| 塑料管道系統.壓力管道的彈性密封圈式連接件用注模制熱塑塑料性配件.耐無部端推力的快速內壓的試驗方法
| Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
|
| BS EN 804-1995
| 塑料管道系統.壓力管道溶劑膠粘接頭的注射模塑承口連接管件.短期內部液壓壓力的試驗方法
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
|
| BS EN 852-1-1996
| 用于輸送人用水的塑料管道系統.游動性評定.游動值的確定
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes
|
| BS EN 911-1996
| 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭.外部流體靜壓條件下防漏密封試驗方法
| Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
|
| BS EN 917-1997
| 塑料管道系統.熱塑閥門.抗內壓和泄漏密封性的試驗方法
| Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
|
| BS EN 922-1995
| 塑料管和管道系統.未增塑聚氯乙烯管道和配件.粘度系數測定和K值計算的樣品準備
| Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the k-value
|
| BS EN 969-1996
| 煤氣管道用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法
| Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
|
| BS EN ISO 10380-2003
| 管道系統.波紋狀金屬軟管和軟管組件
| Pipework - Corrugated metal hoses and hose assemblies
|
| BS EN ISO 10472-3-1998
| 工業洗衣機的安全要求.第3部分：管道式洗滌線及組合機械
| Safety requirements for industrial laundry machinery - Washing tunnel lines including component machines
|
| BS EN ISO 10806-2004
| 管道工程.波紋狀金屬軟管用配件
| Pipework - Fittings for corrugated metal hoses
|
| BS EN ISO 10807-1997
| 管道工程.在爆燃性大氣中電纜保護用皺紋軟金屬管組件
| Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
|
| BS EN ISO 11691-1997
| 聲學.無氣流管道消聲器插入的損耗測量.實驗室調查法
| Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method
|
| BS EN ISO 12162-1996
| 壓力用熱塑性塑料管道和管件.分類和設計.總體使用（設計）系數
| Thermoplastics materials for pipes and fittings for pressure applications - Classification and design - Overall service (design) coefficient
|
| BS EN ISO 13703-2001
| 石油和天然氣工業.近海生產平臺管道系統設計和安裝
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms
|
| BS EN ISO 13783-1998
| 塑料管道系統.硬聚氯乙烯(PVC-U)端部承受負荷的雙承口連接件.密封和承受彎曲內壓的試驗方法
| Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure
|
| BS EN ISO 13844-2000
| 塑料管道系統.與未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯彈性密封環式套筒接頭.負壓下的密封性試驗方法
| Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
|
| BS EN ISO 13845-2000
| 塑料管道系統.與未增塑聚氯乙烯管一起使用的彈性密封環式套筒接頭.內壓下角度偏轉密封試驗
| Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
|
| BS EN ISO 13846-2001
| 塑料管道系統.熱塑性壓力管用端負載和無端負載支承組件和接頭.內部水壓下長期密封性的試驗方法
| Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure
|
| BS EN ISO 14692-1-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.詞匯、符號、應用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials
|
| BS EN ISO 14692-2-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.合格評定和生產
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture
|
| BS EN ISO 14692-3-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.系統設計
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design
|
| BS EN ISO 14692-4-2003
| 石油和天然氣工業.玻璃纖維增強塑料(GRP)管道.制造、安裝和運行
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation
|
| BS EN ISO 14723-2002
| 石油和天然氣工業.管道輸送系統.海下管道閥門
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
|
| BS EN ISO 14726-1-2000
| 船舶和航海技術.管道系統內含物的識別顏色.主要顏色和介質
| Ships and marine technology - Identification colours for the content of piping systems - Main colours and media
|
| BS EN ISO 15465-2004
| 管道.帶繞金屬軟管和軟管組件
| Pipework - Stripwound metal hoses and hose assemblies
|
| BS EN ISO 15493-2003
| 工業用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).元
| Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series
|
| BS EN ISO 15494-2003
| 工業用塑料管道系統.聚丁烯(PB)、聚乙烯(PE)和聚丙烯(PP).元件和系統的規范.米制系列
| Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series
|
| BS EN ISO 15749-2-2004
| 船舶和海上技術.船舶和海上結構物的排水系統.重力系統用衛生排水和排水管道
| Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, drain piping for gravity system
|
| BS EN ISO 15749-3-2004
| 船舶和海上技術.船舶和海上結構物的排水系統.真空系統用衛生排水和排水管道
| Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, drain piping for vacuum system
|
| BS EN ISO 15874-1-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).總則
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - General
|
| BS EN ISO 15874-2-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).管
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Pipes
|
| BS EN ISO 15874-3-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).配件
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Fittings
|
| BS EN ISO 15874-5-2004
| 冷熱水裝置用塑料管道系統.聚丙烯(PP).系統的適用性
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Fitness for purpose of the system
|
| BS EN ISO 15875-1-2004
| 冷熱水裝置用塑料管道系統.交聯聚乙烯.總則
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General
|
| BS EN ISO 15875-2-2004
| 冷熱水裝置用塑料管道系統.交聯聚乙烯.管道
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Pipes
|
| BS EN ISO 15875-3-2004
| 冷熱水裝置用塑料管道系統.交聯聚乙烯.配件
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings
|
| BS EN ISO 15875-5-2004
| 冷熱水裝置用塑料管道系統.交聯聚乙烯.系統的適用性
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system
|
| BS EN ISO 15876-1-2004
| 冷熱水裝置用塑料管道系統.聚丁烯.總則
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - General
|
| BS EN ISO 15876-2-2004
| 冷熱水裝置用塑料管道系統.聚丁烯.管道
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Pipes
|
| BS EN ISO 15876-3-2004
| 冷熱水裝置用塑料管道系統.聚丁烯.配件
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Fittings
|
| BS EN ISO 15876-5-2004
| 冷熱水裝置用塑料管道系統.聚丁烯.系統的適用性
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Fitness for purpose of the system
|
| BS EN ISO 15877-1-2004
| 冷熱水裝置用塑料管道系統.氯化聚氯乙烯.總則
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - General
|
| BS EN ISO 15877-2-2004
| 冷熱水裝置用塑料管道系統.氯化聚氯乙烯.管道
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Pipes
|
| BS EN ISO 15877-3-2004
| 冷熱水裝置用塑料管道系統.氯化聚氯乙烯.配件
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Fittings
|
| BS EN ISO 15877-5-2004
| 冷熱水裝置用塑料管道系統.氯化聚氯乙烯.系統的適用性
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Fitness for purpose of the system
|
| BS EN ISO 15908-2003
| 熱塑塑料管道系統用膠粘劑.膠粘劑熱穩定性測定的試驗方法
| Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
|
| BS EN ISO 16871-2003
| 塑料管道系統.塑料管道和配件.直接(自然)風化法
| Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering
|
| BS EN ISO 21329-2004
| 石油和天然氣工業.管道運輸系統.機械連接件的試驗程序
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
|
| BS EN ISO 3171-1999
| 液態石油.自動管道取樣
| Methods of test for petroleum and its products - BS 2000-476: Petroleum liquids - Automatic pipeline sampling
|
| BS EN ISO 5136-2003
| 聲學.風機和其他鼓風裝置吹到管道中的聲功率的測定.管道法
| Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method
|
| BS EN ISO 5167-1-2003
| 用插入圓截面管道中的壓差裝置測量流體流量.一般原理和要求
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - General principles and requirements
|
| BS EN ISO 5167-2-2003
| 用插入圓截面管道中的壓差裝置測量流體流量.節流孔板
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Orifice plates
|
| BS EN ISO 5167-3-2003
| 用插入圓截面管道中的壓差裝置測量流體流量.噴嘴和文杜利噴嘴
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Nozzles and Venturi nozzles
|
| BS EN ISO 5167-4-2003
| 用插入圓截面管道中的壓差裝置測量流體流量.文杜利管
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Venturi tubes
|
| BS EN ISO 580-2005
| 塑料管和管道系統.噴射模鑄熱塑性配件.熱效應直觀評估法
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
|
| BS EN ISO 6412-1-1995
| 技術制圖.管道的簡化表示法.總規則和直角表示法
| Technical drawings - Simplified representation of pipelines - General rules and orthogonal representation
|
| BS EN ISO 6412-2-1995
| 技術制圖.管道的簡化表示法.第2部分:等角投影
| Technical drawings - Simplified representation of pipelines - Isometric projection
|
| BS EN ISO 6412-3-1996
| 技術制圖.管道的簡化表示法.第3部分:通風和排放系統終端部件
| Technical drawings - Simplified representation of pipelines - Terminal features of ventilation and drainage systems
|
| BS EN ISO 6817-1993
| 封閉管道中導電液體流量測量.電磁流量計測量法
| Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
|
| BS EN ISO 7235-2003
| 聲學.管道消音器和氣體終端設備的實驗室測量步驟.插入損失、流動噪聲和總壓損失
| Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss
|
| BS EN ISO 7369-2004
| 管道.金屬軟管和軟管組件.詞匯
| Pipework - Metal hoses and hose assemblies - Vocabulary
|
| BS EN ISO 8316-1988
| 封閉管道內液體流量的測量.容積測量箱的液體收集法
| Method of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
|
| BS EN ISO 8795-2002
| 用于輸送供人消耗用水的塑料管道系統.析出物滲移量的車測定.塑料管道、管件和連接件的析出物滲移量的測定
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints
|
| BS EN ISO 9080-2003
| 塑料管道和導管系統.用外推法測定熱塑塑料管道的長期靜液壓強度
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
| BS EN ISO 9311-2-2002
| 熱塑性塑料管道系統用膠粘劑.剪切強度的測定
| Adhesives for thermoplastic piping systems - Determination of shear strength
|
| BS EN ISO 9311-3-2005
| 熱塑性管道系統用膠粘劑.測定耐內壓力性的試驗方法
| Adhesives for thermoplastic piping systems - Test method for the determination of resistance to internal pressure
|
| BS ISO 10405-2001
| 石油和天燃?xì)夤I(yè).套管和管道的維護和使用
| Petroleum and natural gas industries - Care and use of casing and tubing
|
| BS ISO 10790-1999
| 封閉管道中液體流量的測量.可里奧利計選擇、安裝和使用的指南(流量、密度和容積流量的測定)
| Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
|
| BS ISO 10838-1-2001
| 燃?xì)庥镁垡蚁┕艿老到y(tǒng)的機械管件.標稱外徑小于或等于63mm的管道用金屬管件
| Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
|
| BS ISO 10838-2-2001
| 燃?xì)庥镁垡蚁┕艿老到y(tǒng)的機械式管件.標稱外徑大于63mm的管道用金屬管件
| Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter greater than 63mm
|
| BS ISO 10838-3-2001
| 燃?xì)庥镁垡蚁┕艿老到y(tǒng)的機械式管件.標稱外徑小于或等于63mm的管道用熱塑性塑料管件
| Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
|
| BS ISO 10931-1-1997
| 工業用塑料管道系統.聚氟乙二烯(PVDF).綜述
| Plastics piping systems for industrial applications - Poly (vinylidene fluoride) - General
|
| BS ISO 10931-2-1997
| 工業用塑料管道系統.聚氟乙二烯(PVDF).管道
| Plastics piping systems for industrial applications - Poly (vinylidene fluoride) - Pipes
|
| BS ISO 10931-3-1997
| 工業用聚氟乙二烯(PVDF)塑料管道系統.第3部分:配件
| Plastics piping systems for industrial applications - Poly (vinylidene fluoride) - Fittings
|
| BS ISO 11563-2003
| 原油和石油產品.散貨運輸.實現管道滿度的指南
| Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for achieving the fullness of pipelines
|
| BS ISO 13359-1998
| 封閉管道傳導性液體流量的測量.法蘭電磁流量計.總長
| Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
|
| BS ISO 13678-2001
| 石油和天然氣工業.與鑄件、管材和管道一起使用的螺紋復合物制件的評價和試驗
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
|
| BS ISO 13679-2003
| 石油和天然氣工業.套管和管道連接的檢驗規程
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| BS ISO 13953-2001
| 聚乙烯管道和配件.根據對焊接頭對試樣的抗拉強度和斷裂模式的測定
| Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
|
| BS ISO 14164-1999
| 穩定源排放.管道中氣流容積流量比率的測定.自動配置方法
| Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
|
| BS ISO 14511-2002
| 封閉管道流體流量測量.熱質量流量計
| Measurement of fluid flow in closed conduits - Thermal mass flowmeters
|
| BS ISO 14531-1-2003
| 塑料管道和配件.氣體燃料輸送用交聯聚乙烯(PE-X)管道系統.米制系列.管規范
| Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Pipes
|
| BS ISO 14726-1-2000
| 船舶技術.管道系統容量的識別顏色.主要顏色和媒介
| Ships and marine technology. Identification colours for the content of piping systems. Main colours and media
|
| BS ISO 14743-2004
| 氣壓傳動.熱塑性管道用插入式連接件
| Pneumatic fluid power - Push-in connectors for thermoplastic tubes
|
| BS ISO 15086-2-2000
| 液壓流體動力.部件和系統液載噪音特性的測定.管道流體聲速的測量
| Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe
|
| BS ISO 15348-2002
| 管道工程.金屬波紋管膨脹節.總則
| Pipework - Metal bellows expansion joints - General
|
| BS ISO 15649-2001
| 石油和天然氣工業.管道
| Petroleum and natural gas industries - Piping
|
| BS ISO 15741-2002
| 油漆和清漆.岸上和近海鋪設的無腐蝕氣體鋼管道內側的減小摩擦涂層
| Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
|
| BS ISO 15837-2006
| 船舶和海上技術.管道系統中使用的有墊圈機械聯接件.性能規范
| Ships and marine technology - Gasketed mechanical couplings for use in piping systems - Performance specification
|
| BS ISO 15838-2004
| 船舶與海上技術.管道設施中使用的帶密封襯墊的機械耦合配件.性能規范
| Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications - Performance specification
|
| BS ISO 19921-2006
| 船舶和海上技術.帶有回彈性和彈性密封件的耐火金屬管道組件.試驗方法
| Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods
|
| BS ISO 19922-2006
| 船舶和海上技術.帶回彈性和彈性密封件的金屬管道組件的耐火性.試驗臺的要求
| Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements on the test bench
|
| BS ISO 3183-3-1999
| 石油和天然氣工業.管道用鋼管的技術交貨條件.C級要求的鋼管
| Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Pipes of requirement class C
|
| BS ISO 4179-2005
| 壓力和非壓力管道用球墨鑄鐵管和配件.水泥灰漿內襯
| Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
|
| BS ISO 5667-5-2006
| 水質.取樣.從水處理站和管道分配系統采樣飲用水的指南
| Water quality - Sampling - Guidance on sampling of drinking water from treatment works and piped distribution systems
|
| BS ISO 7278-4-1999
| 液態烴.動態測量.容積式流量計校驗系統.管道校驗儀操作者指南
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers
|
| BS ISO 7967-4-2005
| 往復式內燃機.零部件和系統詞匯.增壓及進/排氣管道系統
| Reciprocating internal combustion engines - Vocabulary of components and systems - Pressure charging and air/exhaust gas ducting systems
|
| BS ISO 9349-2005
| 預絕緣球墨鑄鐵管道系統
| Preinsulated ductile iron pipeline systems
|
| BS ISO 9631-2004
| 橡膠密封件.溫度為110℃及以下的熱水供給、排水和污水管道用連接環.材料規范
| Rubber seals - Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C - Specifications for the material
|
| BS ISO TR 12764-1998
| 封閉管道中液體流量的測量.在圓形截面導管中插入渦流流量計來測量流率
| Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
|
| BS ISO TR 3313-1998
| 密封管道中液體流量的測量.脈動流動對流量測量?jī)x器影響的指南
| Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
|
| BS ISO/TR 12765-1999
| 封閉式管道中液體流量的測量.使用轉接-時間超聲流量計法
| Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
|
| BS M 62-1987
| 軸線調準的液壓系統管道的夾緊裝置的設計和評定試驗規范
| Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment - Metric series
|
| BS M 64-1987
| 流體管道裝置"Ω"形卡箍(鞍形夾)尺寸規范
| Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations
|
| BS MA 49-1986
| 船舶管道系統用碳鋼管的摘要和應用
| Summary and application of carbon steel tubes for marine pipework systems
|
| BS MA 60-1986
| 船舶管道系統用銅及銅合金管摘要和應用
| Summary and application of copper and copper alloy tubes for ships' pipework systems
|
| BS MA 9-1970
| 柴油機和鍋爐上風煙道用廢氣管道法蘭、螺栓和密封墊
| Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes
|
| CP 312-1-1973
| 塑料管道(熱塑材料)實用規程.第1部分:一般原理和材料選擇
| Code of practice for plastics pipework (thermoplastics material). General principles and choice of material
|
| CP 312-2-1973
| 塑料管道(熱塑材料)實用規程.第2部分:壓力液體輸送用非增塑PVC管
| Code of practice for plastics pipework (thermoplastics material). Unplasticized PVC pipework for the conveyance of liquids under pressure
|
| DD ENV 12097-1997
| 建筑物的通風設備.管道系統.便于維護管道系統的管道系統部件要求
| Ventilation for buildings. Ductwork. Requirements for ductwork components to facilitate maintenance of ductwork systems
|
| DD ENV 12108-2001
| 塑料管道系統.建筑物內部的人用冷熱水壓力管道系統的安裝指南
| Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
|
| DD ENV 1329-2-2001
| 建筑物內糞水和廢物排放的塑料管道系統(低溫和高溫).未增塑聚氯乙烯（PVC－U）.符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
|
| DD ENV 13801-2001
| 建筑物內土壤和廢物排放用塑料管道系統(低和高溫).熱塑性.安裝推薦方法
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
|
| DD ENV 1401-2-2001
| 非壓力地下廢水排放和污水系統的塑料管道系統.非增塑聚氯乙烯.符合性評定指南
| Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity
|
| DD ENV 1401-3-2001
| 非壓力地下廢水和排水系統的塑料管道系統.非增塑聚氯乙烯（PVC－U）.安裝指南
| Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for installation
|
| DD ENV 1451-2-2001
| 建筑物內糞水和廢物排放的塑料管道系統(低溫和高溫).聚丙烯.符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
|
| DD ENV 1452-6-2002
| 供水用塑料管道系統.未增塑聚氯乙烯(PVC-U).安裝指南
| Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for installation
|
| DD ENV 1452-7-2001
| 供水用塑料管道系統.未增塑聚氯乙烯.合格評定指南
| Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
|
| DD ENV 1453-2-2001
| 建筑物內的糞水和廢物排放用的帶結構壁管道的塑料管道系統（低溫和高溫）.非增塑聚氯乙烯.一致性評價指南
| Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
|
| DD ENV 1455-2-2001
| 建筑物內糞和廢物排放的塑料管道系統(低溫和高溫).丙烯腈-丁二烯-苯乙烯共聚物.符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS). Guidance for the assessment of conformity
|
| DD ENV 1519-2-2001
| 建筑物內土壤和廢物排放的塑料管道系統(低溫和高溫).聚乙烯.符合性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
|
| DD ENV 1565-2-2001
| 建筑結構內低溫和高溫糞水和廢物排放的塑料管道系統.苯乙烯共聚物.符合性評價指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for the assessment of conformity
|
| DD ENV 1566-2-2001
| 建筑結構內低溫和高溫土壤和廢物排放的塑料管道系統.聚氯乙烯.一致性評定指南
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity
|
| DD ENV 1852-2-2001
| 非壓力地下廢水排放和污水系統的塑料管道系統.聚丙烯.符合性評定指南
| Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity
|
| DD ENV 1998-4-1999
| 歐洲規程8:防地震結構的設計條例.貯倉、水箱和管道
| Eurocode 8: Design provisions for earthquake resistance of structures. Silos, tanks and pipelines
|
| KIT 110-2002
| 金屬工業管道系統
| Metallic industrial piping kit
|
| KIT 142-2004
| 管道實用規程匯編
| Code of practice for pipelines kit
|
| 編號 | 中文名稱 | 英文名稱 |
|---|