| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF A05-671-2001
| 海底管道的陰極保護
| (Cathodic protection for submarine pipelines.)
|
| NF A48-810-1995
| 燃?xì)夤艿烙们蚰T鐵管、配件、附件及其接頭.要求和試驗方法
| (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
|
| NF A48-810/A1-1999
| 燃?xì)夤艿烙们蚰T鐵管、配件、附件及其接頭.要求和試驗方法
| (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
|
| NF A48-830-1983
| 鑄制產品.有壓力的飲用水聚氯乙烯管道用球墨鑄鐵接頭
| (Foundry products. Spheroidal graphite cast iron sittings for PVC drinking water pipes under pressure.)
|
| NF A48-840-1984
| 鑄造產品.鑄制產品.球墨鑄鐵管道部件.法蘭盤系列.法蘭盤.定義.尺寸.規范
| (FOUNDRY PRODUCTS. SPHEROIDAL GRAPHITE CAST IRON PIPES. FLANGES SERIES. FLANGES DEFINITION. DIMENSIONS. SPECIFICATIONS.)
|
| NF A48-850-1984
| 鑄造產品.溢流管用球墨鑄鐵管道部件.溢流管.承插件系列.技術規范
| (FOUNDRY PRODUCTS. DUCTILE CAST IRON PIPING ELEMENTS FOR PRE-INSULATED PIPELINE. PRE-INSULATED PIPES,SOCKET SERIE. TECHNICAL SPECIFICATION.)
|
| NF A48-851-1985
| 鑄造產品.壓力管道用球墨鑄鐵管.聚氨酯涂層
| (FOUNDRY PRODUCTS. DUCTILE IRON PIPES FOR PRESSURE PIPELINES. POLYURETHAN EXTERNAL COATING.)
|
| NF A48-860-1981
| 鑄造產品.承壓管道用可鍛鑄鐵管道部件.承插系列.GS快速接頭.連接尺寸和連接附件
| (Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.)
|
| NF A48-870-1981
| 鑄造產品.承接管道用可鍛鑄鐵管道部件.承插系列.GS標準接頭.連接尺寸和連接附件
| (Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.)
|
| NF A48-902-1985
| 鑄造產品.壓力管道用球墨鑄鐵管.離心水泥砂漿內飾面.新涂覆砂漿成分的控制
| (Foundry products. Ductile iron pipes for pressure pipelines. Contrifugal cement mortar internal lining. Composition controls of freshly applied mortar.)
|
| NF A49-117-1985
| 鋼管.管道和其他用途光端無縫鋼管.鐵素體和奧氏體不銹鋼.尺寸.交貨技術條件
| (Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-147-1980
| 鋼管.一般用和管道用光端縱向焊接鋼管.奧氏體不銹鋼.（尺寸.交貨技術條件.）
| (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-148-1980
| 鋼管.一般用和管道用光端縱向焊接鋼管.鐵素體不銹鋼.（尺寸.交貨技術條件.）
| (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-170-1-1999
| 對縫焊接管道配件.第1部分:一般使用和無特殊檢驗要求的鍛碳鋼
| (Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general use and without specific inspection requirements.)
|
| NF A49-750-1994
| 地下熱水預絕緣耦合管道系統.鋼制給水管,聚亞胺脂熱絕緣和聚乙烯外套的管道裝置
| (Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
|
| NF A49-751-1994
| 地下熱水管網的預隔熱粘結管道系統.鋼制供水管配件、聚氨基甲酸乙酯熱絕緣材料以及高密度聚乙烯外殼
| (Preinsulated bonded pipe systems for underground hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
|
| NF A51-126-1-2001
| 銅和銅合金.空氣調節和制冷用無縫圓形銅管.第1部分:管道系統用管
| (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems.)
|
| NF A72-120-1973
| 鋼鐵廠.氣體管道和大直徑閥.帶法蘭的接頭（PN6）
| (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.)
|
| NF A91-701-1999
| 表面處理.工廠水箱,管道和設備的識別.安全標志
| (Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.)
|
| NF C30-400-2003
| 地下管道和電纜用電磁波探測器.性能和安全
| (Electromagnetic locators for buried pipes and cables - Performance and safety.)
|
| NF C46-304-1991
| 用于工業過程管道的傳感器.單個系列試驗和檢驗指南
| (Transmitters for use in industrail-process control systems. Guidance for inspection and routing testing.)
|
| NF C68-111/A11-2002
| 電纜管理用管道系統.第2-1部分:剛性管道系統的特殊要求
| (Conduit systems for cable management - Part 2-1 : particular requirements for rigid conduit systems.)
|
| NF C68-112/A11-2002
| 電纜管理用管道系統.第2-2部分:撓性管道系統的特殊要求
| (Conduit systems for cable management - Part 2-2 : particular requirements for pliable conduit systems.)
|
| NF C68-113/A11-2002
| 電纜管理用管道系統.第2-3部分:軟性管道系統的特殊要求
| (Conduit systems for cable management - Part 2-3 : particular requirements for flexible conduit systems.)
|
| NF C68-114/A1-2001
| 電纜管理用電纜安裝管道系統.第2-4部分:地下管道系統的特殊要求
| (Conduit systems for cable management - Part 2-4 : particular requirements for conduit systems buried underground.)
|
| NF C68-120-1997
| 電器設備用電纜中繼系統和電纜管道系統.第1部分:一般要求
| (CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 085-1).)
|
| NF C68-120/A1-2002
| 電氣裝置的電纜干管和管道系統.第1部分:一般要求
| (Cable trunking systems and cable ducting systems for electrical installations - Part 1 : general requirements.)
|
| NF C93-859-1-2001
| 系列規范:用于管道或直接掩埋的光通訊電纜
| (Familly Specification : optical telecommunication cables to be used in ducts or direct buried application.)
|
| NF C93-859-5-2002
| 單膜光纖電纜(管道/直埋設備)
| (Single-mode optical fibre cable (duct/direct buried installation).)
|
| NF D36-103-2001
| 家政學.使用管道氣體燃料的家用器具外部連接用(增強)橡膠軟管
| (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using gaseous fuels by networks.)
|
| NF D36-107-1994
| 家政學.家用管道煤氣裝置連接用的帶機械接頭的11號或12號聚酰胺基未增強軟管
| (Household economy. Flexible piping based on polyamide 11 or 12 for the external connection of domestic appliances using gaseous fuels distributed by networks.)
|
| NF D36-121-1994
| 家庭節約.網絡分配的家用液化氣設備末端聯結的波紋狀金屬柔性管道
| (Household economy. Corrugated metallic flexible piping for the external connection of domestic appliances using gaseous fuels distributed by networks.)
|
| NF D36-210-2001
| 建筑物燃?xì)夤艿拦こ痰穆菁y接頭再密封的方法
| (Means for resealing threaded joints of gas pipework in buildings.)
|
| NF E03-004-1981
| 螺紋密封的(燃?xì)?管道螺紋(錐形外螺紋和圓柱形內螺紋)
| (Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).)
|
| NF E03-005-1981
| 無螺紋密封的(燃?xì)?管道螺紋(圓柱形內螺紋和外螺紋)
| (Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).)
|
| NF E03-161-1982
| 稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.前言
| (Checking of parallel pipe threads with limit gauges. Introduction.)
|
| NF E03-162-1982
| 稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.外螺紋檢查儀
| (Checking of parallel pipe threads with limit gauges. Threaded gauges for screws.)
|
| NF E03-163-1982
| 稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.內螺紋檢查儀
| (Checking of parallel pipe threads with limit gauges. Threaded gauges for nuts.)
|
| NF E03-165-1984
| 稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.螺紋密封的管道螺紋(按標準ＮＦＥ０３－００４)
| (Checking of pipe threads where pressure tight joints are made on the threards with limit gauges (according to NF E 03-004).)
|
| NF E04-118-1-1995
| 技術制圖.管道的簡化表示法.第1部分:通則和正交表示法
| (Technical drawings. Simplified representation of pipelines. Part 1 : general rules and orthogonal representation.)
|
| NF E04-118-2-1995
| 技術制圖.管道的簡化表示法.第2部分:等角投影
| (Technical drawings. Simplified representation of pipelines. Part 2 : isometric projection.)
|
| NF E04-118-3-1996
| 技術制圖.管道的簡化表示法.第3部分:通風和排放系統終端部件
| (TECHNICAL DRAWINGS. SIMPLIFIED REPRESENTATION OF PIPELINES. PART 3 : TERMINAL FEATURES OF VENTILATION AND DRAINAGE SYSTEMS. (EUROPEAN STANDARD EN ISO 6412-3).)
|
| NF E04-202-1-1996
| 工業加工用管道、管道元件和儀器.圖形符號展示.第1部分:基本要求
| (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 1 : basic requirements.)
|
| NF E04-202-2-1996
| 工業加工用管道、管道元件和儀器.圖形符號表示.第2部分:管道和接頭
| (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 2 : pipelines and junctions.)
|
| NF E04-202-3-1996
| 工業加工用管道、管道元件和儀器.圖形符號表示.第3部分:機械傳動和流體驅替元件
| (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 3 : mechanical drive and fluid displacement components.)
|
| NF E04-202-4-1996
| 工業加工用管道、管道元件和儀器.圖形符號表示.第4部分:加熱設備
| (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 4 : heat equipment.)
|
| NF E04-202-8-2003
| 工業加工用管道、管道元件和儀器.圖形符號表示.第8部分:粉碎、成型和其他工藝
| (Pipelines, pipe components and apparatus for industrial processes - Symbolic representation - Part 8 : comminution, shaping and other process.)
|
| NF E04-202-9-2003
| 工業加工用管道、管道元件和儀器.圖形符號表示.第9部分:存儲和搬運
| (Pipelines, pipe components and apparatus for industrial processes - Symbolic representation - Part 9 : storage, handling.)
|
| NF E09-081-6-1999
| 機器的安全.氣載危險物質排放的評定.第6部分:非管道式排放物質的分離效率
| (Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 6 : separation efficiency by mass, unducted outlet.)
|
| NF E09-081-7-1999
| 機器的安全.氣載危險物質排放的評定.第7部分:管道式排放物質的分離效率
| (Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 7 : separation efficiency by mass, ducted outlet.)
|
| NF E17-002-1994
| 封閉管道中水流量的測量.飲用冷水測量計.第1部分:規范
| (Measurement of water flow in closed conduits. Meters for cold potable water. Part 1 : specifications.)
|
| NF E17-006-1986
| 封閉管道中水流量的測量.飲用冷水表.組合表.第1部分:規范
| (Measurement of water flow in closed conduits. Meters for cold potable water. Combination meters. Part 1 : specifications.)
|
| NF E17-007-1988
| 封閉管道中水流量的測定.飲用冷水表.第2部分:安裝要求
| (Measurement of water flow in closed conduits. Meters for cold potable water. Combination meters. Part 2 : installation requirements.)
|
| NF E17-008-1995
| 封閉管道中水流量的測量.冷飲用水表.組合水表.第3部分:試驗方法
| (Measurement of water flow in closed conduits. Meters for cold potable water. Combination meters. Part 3 : test methods.)
|
| NF E29-008-1972
| 管道.壓力和溫度.２３％鎳和４％錳奧氏體球墨合金鑄鐵部件
| (TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 23% NICKEL 4% MANGANESE SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.)
|
| NF E29-009-1972
| 管道.壓力和溫度.２０％鎳和２％鉻奧氏體球墨合金鑄鐵部件
| (TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 20% NICKEL 2% CHROMIUM SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.)
|
| NF E29-011-1983
| 管道的術語和定義
| (PIPEWORK. TERMS AND DEFINITION.)
|
| NF E29-018-1986
| 工業管道.凹面或凸面連接的法蘭盤連接環.ＩＳＯ標準壓力為２．５到５０
| (Industrial pipework. Bracing rings for flanges with female (groove or spigot), or male(tongue or spigot) faces. ISO PN 2,5 to ISO PN 50.)
|
| NF E29-032-1985
| 工業管道.鋼制構件.對焊接頭.準備
| (Industrial pipework. Steel components. Butt welding ends. Preparation.)
|
| NF E29-033-1994
| 地下熱水管道網絡的隔熱管道系統.鋼制供水管道聚氨基甲酸乙酯熱絕緣材料及高密度聚乙烯外殼的連接組件
| (Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
|
| NF E29-041-1994
| 工業管道.減縮的螺栓柄.規范
| (INDUSTRIAL PIPEWORK. REDUCED SHANK BOLTS. SPECIFICATIONS.)
|
| NF E29-043-1990
| 工業管道工程.管道、鍋爐和壓力容器法蘭組件用非合金鋼或合金鋼制螺栓
| (Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.)
|
| NF E29-134-1978
| 家用管道燃?xì)庠O(shè)備用帶節氣閥并與陽端Ｇ１／２相連的雙連式安全開關
| (SAFETY RELEASE DEVICES WITH BUILT-IN STOP TAP AND TWO G 1/2 MALE UNION CONNECTIONS FOR DOMESTIC APPLIANCES USING MAINS GAS FUELS.)
|
| NF E29-204-1992
| 工業管道系統.鍛制鋼法蘭和套圈.材料.機械性能.制造.試驗
| (Industrial pipeworks. Forged steel flanges and collars. Materials. Mechanical properties. Fabrication. Tests.)
|
| NF E29-207-1986
| 工業管道.合金鋼法蘭盤和卡環及復合材料法蘭盤.術語，尺寸，規范
| (INDUSTRIAL PIPEWORK. COPPER ALLOYS FLANGES AND COLLARS AND COMPOSITE FLANGES. TERMINOLOGY. DIMENSIONS. SPECIFICATIONS.)
|
| NF E29-210-1985
| 工業管道.差動壓力裝置用有孔法蘭
| (INDUSTRIAL PIPEWORK. ORIFICE FLANGES FOR DIFFERENTIAL PRESSURE DEVICES.)
|
| NF E29-220-1986
| 工業管道.管道用銜接器和帶法蘭的可調墊圈.規范
| (INDUSTRIAL PIPEWORK. FLANGED ADAPTERS AND DISASSEMBLY SEAL FOR PIPEWORK. SPECIFICATIONS.)
|
| NF E29-251-1972
| 工業管道.不銹鋼制焊接沖壓凸緣（薄型系列）.公稱壓力１０
| (STAMPED STAINLESS-STEEL FILLETS FOR WELDING (THIN SERIES) PN 10)
|
| NF E29-260-1987
| 工業管道.涂PTFE-FEP-PFA碳氟化樹脂的管道構件
| (Industrial pipes. Pipe components with PTFE - FEP - PFA fluorocarbon resin.)
|
| NF E29-302-2-1996
| 工業配件.安裝在帶法蘭的管道中的金屬配件結構長度.第2部分:按級別標識的配件
| (Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. Part 2 : class-designated valves.)
|
| NF E29-480-1994
| 地下熱水管網的預隔熱管道系統.鋼制供水管道、聚氨基甲酸乙酯熱絕緣材料及高密度聚乙烯外殼的鋼閥門組件(歐
| (Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
|
| NF E29-531-1981
| 管道.凸肩對接的螺紋連接管.標準壓力10
| (Pipework. Threaded fittings with gasket on shoulder.)
|
| NF E29-539-1981
| 管道.采暖設備上的球錐連接螺紋連接管部件.標準壓力16
| (Pipework. Screwed connecting part with a spheroconical function for heating plants.)
|
| NF E29-573-1988
| 工業管道.“特快“連接管，公稱壓力”10
| (Industrial pipework. “Express“ connections. Maximum permissible working pressure 1 MPa (10 bar).)
|
| NF E29-577-1978
| 管道.工具和氣動機械用的螺紋連接管
| (PIPEWORKS. SCREWED CONNECTIONS FOR PNEUMATIC TOOLS AND MACHINES.)
|
| NF E29-591-1-1998
| 銅和銅合金.管道配件.第1部分:銅管毛細管終端焊接配件
| (Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.)
|
| NF E29-591-2-1998
| 銅和銅合金.管道配件.第2部分:用于銅管的壓縮終端配件
| (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 2 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES. (EUROPEAN STANDARD EN 1254-2).)
|
| NF E29-591-3-1998
| 銅和銅合金.管道配件.第3部分:用于塑料管的壓縮終端配件
| (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).)
|
| NF E29-591-4-1998
| 銅和銅合金.管道配件.第4部分:用毛細或壓縮終端連接于其它終端的配件
| (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4 : FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS. (EUROPEAN STANDARD EN 1254-4).)
|
| NF E29-591-5-1998
| 銅和銅合金.管道配件.第4部分:銅管毛細管釬焊短末端配件
| (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 5 : FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES. (EUROPEAN STANDARD EN 1254-5).)
|
| NF E29-600-1987
| 工業管道.鋼制連接管和螺塞.插接式焊接連接管.螺紋連接管和螺塞
| (Industrial pipework. Steel fittings and plugs. Socket welding fittings.)
|
| NF E29-726-1974
| 真空技術.真空管道用鋼管.尺寸
| (VACUUM TECHNOLOGY. STEEL TUBES FOR VACUUM PIPES. DIMENSIONS)
|
| NF E29-802-2000
| 聚乙烯管道系統用帶縮終端的可鍛鑄鐵配件
| (Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems.)
|
| NF E29-820-1983
| 管道.金屬軟管.術語
| (Pipeworks. Flexible metal hoses. Terminology.)
|
| NF E29-821-1983
| 管道.咬邊金屬軟管.規范
| (Pipeworks. Flexible interlocked metal hoses. Specifications .)
|
| NF E29-833-1979
| 管道.雙咬邊金屬軟管.(石棉墊片，密封，圓截面，奧氏體不銹鋼制)
| (PIPEWORKS. FLEXIBLE METAL HOSES DOUBLE INTERLOCK,ASBESTOS PACKING,PRESSURE-TIGHT,CIRCULAR SECTION,IN AUSTENITIC STAINLESS STEEL.)
|
| NF E29-834-2003
| 管道工程.波紋狀金屬軟管和軟管組件
| (Pipework - Corrugated metal hoses and hose assemblies.)
|
| NF E29-836-1997
| 管道工程.在爆燃性空氣中電纜保護用皺紋軟金屬管組件(歐洲標準EN ISO 10807)
| (Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere.)
|
| NF E29-850-1974
| 管道支撐.總則
| (PIPE SUPPORTS. GENERAL.)
|
| NF E29-951-1975
| 工業管道.平面和凹凸面法蘭盤的扁豆?fàn)顗|片.標準外形尺寸64到160.尺寸
| (LENSES AND LENS_SHAPED SEALS FOR FLAT OR RAISED FLANGES GN 64 TO GN160.)
|
| NF E29-960-1985
| 工業管道.大氣污染進氣管道.術語和定義
| (Industrial pipework. Suction pipe for atmospheric polluants. Terms and definitions.)
|
| NF E29-961-1985
| 工業管道.大氣污染進氣管道.基本金屬部件.規范
| (Industrial pipework. Suction pipe for atmospheric polluants. Basic metal components . Specifications.)
|
| NF E29-962-1987
| 工業管道.大氣污染物進氣管道.補充金屬部件.規范
| (Industrial pipework. Suction pipe for atmospheric pollutants. Additionnal metal components . Specifications.)
|
| NF E29-963-1988
| 工業管道.吸氣設備.設計要求的特征.技術登計卡樣式
| (Industrial pipework. Suction devices. Design requirements. Model for a technical sheet.)
|
| NF E31-330-2-2000
| 燃油鍋爐用供油系統的安裝. 第2部分:安全要求和試驗.部件,閥門, 管道,過濾器,油充氣器,儀表
| (Installations for oil supply systems for oil burners - Part 2 : safety requirements and tests : parts, valves, pipes, filters, oil de-aerators, meters.)
|
| NF E35-303-1960
| 冷凍設備.水果、蛋類、液體、肉類和屠宰物等用途的管道式冷凍模型
| (REFRIGERATING SYSTEMS. TUNNEL-TYPE FREEZERS FOR FRUIT,EGGS,LIQUIDS,MEAT,GIBLETS,ETC.)
|
| NF E35-413-2001
| 冷卻系統和熱泵.減壓裝置及其相應管道.計算方法
| (Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation.)
|
| NF E35-415-1998
| 冷凍系統和熱泵.系統流程圖和管道及結構圖.流程圖和符號
| (REFRIGERATING SYSTEMS AND HEAT PUMPS. SYSTEM FLOW DIAGRAMS AND PIPING AND INSTRUMENT DIAGRAMS. LAYOUT AND SYMBOLS. (EUROPEAN STANDARD EN 1861).)
|
| NF E39-011-2003
| 區域供暖管道.直埋式熱水供暖網用預隔熱連接的管道系統.聚氨酯熱絕緣和聚乙烯外覆層的用戶鋼管組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene)
|
| NF E39-012-2003
| 區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯隔熱和聚乙烯外護層的入戶鋼管用接頭組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies for steel service pipes, polyurethane thermal insulation and outer casing of polye)
|
| NF E39-013-2003
| 區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯隔熱和聚乙烯外覆層進宅鋼管用鋼閥門組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of pol)
|
| NF E39-014-2003
| 區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯隔熱和聚乙烯外覆層的進宅鋼管用接合組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of poluethyl)
|
| NF E48-392-2-2001
| 液壓傳動.元件和系統中液載噪音特性的測定.第2部分:管道液流中聲音速度的測量
| (Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe.)
|
| NF E49-300-2000
| 氣流動力.通過管道庫測定空氣借記特性的方法
| (Pneumatic fluid power - Method of characterization of air debit coefficients by drains reservoir.)
|
| NF E51-708-2002
| 建筑物的通風.管道工程.軟管的尺寸和機械要求
| (Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts.)
|
| NF E51-717-2003
| 建筑物的通風.管道系統.環形薄金屬管道的強度和泄漏
| (Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts.)
|
| NF E51-720-1998
| 建筑物通風.管道作業.一般通風用圓形法蘭的尺寸
| (Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation.)
|
| NF E51-721-2002
| 建筑物通風.管道懸吊裝置和支撐物.強度要求
| (Ventilation for buildings - Ductwork hangers and supports - Requirements for strength.)
|
| NF E51-733-2003
| 建筑物通風.非金屬管.絕緣制管板材制成的管道設施
| (Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards.)
|
| NF E58-125-1998
| 土方機械.安全性.第9部分:管道鋪設機的要求
| (EARTH-MOVING MACHINERY. SAFETY. PART 9 : REQUIREMENTS FOR PIPELAYERS. (EUROPEAN STANDARD EN 474-9).)
|
| NF E66-153-1990
| 煤氣管道圓柱螺紋手用和機用圓螺絲板牙
| (Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)
|
| NF E66-154-1990
| 煤氣管道錐形螺紋手用和機用圓螺紋板牙
| (Hand- and machine-operated circular screwing dies for taper pipe threads. R series.)
|
| NF E86-700-1-2002
| 金屬工業管道.第1部分:總則
| (Metallic industrial piping - Part 1 : general.)
|
| NF E86-700-2-2002
| 金屬工業管道.第2部分:材料
| (Metallic industrial piping - Part 2 : materials.)
|
| NF E86-700-3-2002
| 金屬工業管道.第3部分:設計和計算
| (Metallic industrial piping - Part 3 : design and calculation.)
|
| NF E86-700-4-2002
| 金屬工業管道.第4部分:制造和安裝
| (Metallic industrial piping - Part 4 : fabrication and installation.)
|
| NF E86-700-5-2002
| 金屬工業管道.第5部分:檢測和試驗
| (Metallic industrial piping - Part 5 : inspection and testing.)
|
| NF F24-003-1968
| 鐵路車輛.輕型器材.管道系統.帶復曲支承面套筒和尾端的可拆卸管和前端連接器
| (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.)
|
| NF F24-004-1968
| 鐵路車輛.輕型器材.管道系統.由三個工件組成的帶復曲支承面套筒和尾端的可拆卸管和前端連接器
| (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. 3-PIECE REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.)
|
| NF F24-005-1968
| 鐵路車輛.輕型器材.管道系統.擺動式管接頭
| (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. SWIVEL CONNECTORS.)
|
| NF J24-020-1957
| 造船工業.軟管.船用管道軟管的連接.使用總表
| (SHIPBUILDING. FLEXIBLE PIPING. METHODS OF CONNECTING TO SHIPBOARD PIPELINES. GENERAL TABLE.)
|
| NF J40-003-1-2002
| 船和造船技術.管道系統容量的識別顏色.第1部分:主顏色和媒介
| (Ships and marine technology - Identification colour for the content of piping systems - Part 1 : main colours and media.)
|
| NF J41-012-1975
| 造船工業.海水管道系統.減少腐蝕的測量
| (SHIPBUILDING. SEA WATER PIPING SYSTEMS. MEASURES FOR CORROSION REDUCTION.)
|
| NF J82-000-1967
| 造船工業.管道.標準表
| (INLAND NAVIGATION. PIPING. STANDARDS LIST.)
|
| NF J82-214-1967
| 造船工業.管道.接頭.分類和應用
| (INLAND NAVIGATION. PIPING. SEALING RINGS. CLASSIFICATION AND USE.)
|
| NF L40-100-1966
| 飛行器的液體裝置.管道接頭基本尺寸
| (INSTALLATION OF FLUIDS ABOARD AIRCRAFT. BASIC DIMENSIONS OF HOSE CONNECTIONS.)
|
| NF L40-201-1988
| 管道鑒定方法
| (AEROSPACE. PIPELINES. IDENTIFICATION.)
|
| NF L41-210-1983
| 液體系統.軟管、管道和接頭的脈沖試驗
| (Fluid systems. Impulse testing of hose, tubing and fittings.)
|
| NF L43-711-1976
| 管道連接用Ｖ形法蘭.外形尺寸
| (V BAND COUPLINGS FOR DUCTING AND PIPING. PROFILE DIMENSIONS.)
|
| NF M50-009-2000
| 燃?xì)夤?yīng)系統.最大工作壓力達(和包括)16巴的燃?xì)夤艿?功能要求
| (Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements.)
|
| NF M51-007-1998
| 液化天然氣裝置和設備.為液化天然氣管道上用法蘭連接設計的墊圈的適配性測試
| (INSTALLATIONS AND EQUIPMENT FOR LNG. SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING. (EUROPEAN STANDARD EN 12308).)
|
| NF M82-011-1987
| 煤礦器材和工具.煤礦器材.風扇型通風管軟管道.規范
| (Mining equipment. Flexible venting ducts. Ventubes of the blowing type. Specifications.)
|
| NF M82-013-1987
| 煤礦器材和工具.煤礦器材.吸入型通風管軟管道.規范
| (MINING EQUIPMENT. FLEXIBLE VENTING DUCTS. VENTUBES OF THE SUCTION TYPE. SPECIFICATIONS.)
|
| NF M87-217-2003
| 石油和天然氣工業.海上建設平臺管道系統的設計和安裝
| (Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms.)
|
| NF M87-222-2002
| 石油和天然氣工業.管道運輸系統.管道寬度
| (Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines.)
|
| NF M87-240-2002
| 石油和天然氣工業.作外殼、管道和連接材料用的耐腐蝕合金無縫管.交貨技術條件
| (Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions.)
|
| NF P16-101-1999
| 用于液壓交換管道,排水系統和廢水組份測定的一般要求.(歐洲標志EN773)
| (General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers.)
|
| NF P16-103-1999
| 用于氣壓交換管道,排水系統和廢水組份測定的一般要求.(歐洲標志EN1293)
| (General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers.)
|
| NF P16-120-1998
| 在各種負載條件下地下管道的結構設計.第1部分:一般要求(EN 1295-1)
| (Structural design of buried pipelines under various conditions of loading. Part 1 : general requirements.)
|
| NF P16-125-1997
| 下水管道的鋪設和檢驗
| (Construction and testing of drains and sewers.)
|
| NF P16-126-2000
| 非挖溝結構和管道及排水管的試驗
| (Trenchless construction and testing of drains and sewers.)
|
| NF P16-150-7-1998
| 建筑物外管道和污水系統.第6部分:維修和操作(歐洲標準EN 752-7)
| (DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 7 : MAINTENANCE AND OPERATIONS. (EUROPEAN STANDARD EN 752-7).)
|
| NF P16-250-2-2000
| 建筑物內的重力排水系統.第2部分:衛生管道,布局和計算
| (Gravity drainage systems inside buildings - Part 2 : sanitary pipework, layout and calculation.)
|
| NF P16-250-3-2000
| 建筑物內的重力排水系統.第3部分:屋頂管道,布局和計算
| (Gravity drainage systems inside buildings - Part 3 : roof drainage, layout and calculation.)
|
| NF P16-304-1997
| 地下排水管道用纖維水泥管.第1部分:重力循環系統用管子、接頭和配件(歐洲標準EN 588-1)
| (Fibre-cement pipes for sewers and drains. Part 1 : pipes, joints and fittings for gravity systems.)
|
| NF P16-321-1/A3-1999
| 雨水和污水管道用陶土管、配件及管連接件.第1部分:要求
| (Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1 : requirements.)
|
| NF P16-321-3-1992
| 雨水管和污水管用陶土管、配件和管道連接件.第3部分:試驗方法(EN 295-3)
| (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 3 : test methods.)
|
| NF P16-321-5-1994
| 排水及污水用陶土管道,配件和管接頭.第5部分:多孔陶土管道和配件的要求(EN 295-5)
| (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.)
|
| NF P16-321-6-1996
| 排水及污水用陶土管道.配件和管接頭.第6部分:陶土管道的出入水孔的要求
| (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.)
|
| NF P16-321-7-1996
| 排水及污水用陶土管道.配件和管接頭.第7部分:陶土管道和管道插孔用連接件的要求
| (Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.)
|
| NF P16-325-1-1999
| 廢水系統有插端和管座的徑向焊接熱浸電鍍鋼管管道和配件.第1部分:要求,試驗和質量控制(EN1123-1)
| (Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.)
|
| NF P16-325-2-1999
| 廢水系統有插端和管座的徑向焊接熱浸電鍍鋼管管道和配件.第2部分:尺寸(EN1123-2)
| (Pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 2 : dimensions.)
|
| NF P16-342-1990
| 排水.排水管道上的混凝土制觀察孔用的在工廠加工構件.定義、規范、試驗方法、標記、驗收條件
| (DRAINAGE,SEWERAGE. PRECAST CONCRETE ELEMENTS OF MANHOLES FOR SEWAERAGE NETWORKS. DEFINITIONS SPECIFICATIONS,TESTING METHODS,MARKING,BASIS FOR ACCEPTANCE.)
|
| NF P16-345-1-2003
| 非加筋、鋼筋和加筋混凝土管道和配件
| (Concrete pipes and fittings, unreinforced, steel fibre and reinforced.)
|
| NF P16-345-2-2003
| 非加筋、鋼筋和加筋混凝土管道和配件.第2部分:國家規范
| (Concrete pipes and fittings, unreinforced, steel fibre and reinforced - Part 2 : national specification.)
|
| NF P16-351-1998
| 塑料.民用機械用亞地表地下塑料管道系統.規范
| (Plastics. Plastics piping system for civil engineering subsoil drainage. Specification.)
|
| NF P16-352-1-1998
| 非壓力地下管道和廢水用塑料管道系統.非塑化聚(乙烯,氯乙烯)(PVC-D).第1部分:管道規范,配件和系統
| (Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Part 1 : specifications for pipes, fittings and the system.)
|
| NF P16-357-1-1997
| 無壓地下排水系統用塑料管道系統.聚丙烯(PP).第1部分:管道、配件和系統的規范
| (Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1 : specifications for pipes, fittings and the system.)
|
| NF P16-357-1/A1-2002
| 無壓地下排水系統用塑料管道系統.聚丙烯(PP).第1部分:管道、配件和系統的規范
| (Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.)
|
| NF P16-358-1-2001
| 地下和地上排水和排污用塑料壓力管道系統.未增塑聚氯乙烯(PVC-U).第1部分:管道元件和系統規范
| (Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for piping components and the system.)
|
| NF P16-360-2002
| 塑料管道系統.無壓地下排水系統用管道系統.耐熱循環和外部負載的試驗方法
| (Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.)
|
| NF P16-361-3-1997
| 無壓地下排水系統用塑料管道系統.不飽和聚酯樹脂(UP)基礎上的玻璃增強熱固塑料(GRP).第3部分:配件
| (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.)
|
| NF P16-361-5-1997
| 無壓地下排水系統用塑料管道系統.不飽和聚酯樹脂(UP)基礎上的玻璃增強熱固塑料(GRP).第5部分:接頭的適用性
| (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.)
|
| NF P16-361-6-1997
| 無壓地下排水系統用塑料管道系統.不飽和聚酯樹脂(UP)基礎上的玻璃增強熱固塑料(GRP).第6部分:安裝實施規程
| (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.)
|
| NF P16-364-1-2003
| 地下非壓力排水和污水管網更新用塑料管道系統.第1部分:總則
| (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general.)
|
| NF P16-364-3-2003
| 地下非壓力排水和污水管網更新用塑料管道系統.第3部分:緊配合管用襯層
| (Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.)
|
| NF P16-364-4-2003
| 地下非壓力排水和污水網用塑料管道系統.第4部分:現場固化管用的管襯
| (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.)
|
| NF P36-411-1-2000
| 地上外部用塑料雨水管道系統.第1部分:非塑化聚氯乙烯(PVC-U)管道系統.第1部分:管,配件和系統規范
| (Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes, fittings and the system.)
|
| NF P40-201/A1-1999
| DTU 60.1.建筑工程.人居住的建筑物內的衛生管道.技術規范
| (DTU 60.1 - Building works - Sanitary plumbing in residencial buildings - Technical specifications.)
|
| NF P40-201/A2-2000
| DTU 60.1.建筑工程.人居住的建筑物內的衛生管道.技術規范
| (DTU 60.1 - Building works - Sanitary plumbing in residential buildings - Technical specifications.)
|
| NF P41-030-1999
| 有機材料對飲用水的影響.管道系統中水味道的測定.第1部分:試驗方法
| (Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1 : test method.)
|
| NF P41-031-1-2002
| 有機物質對人類生活用水的影響.有機物質.管道系統中水的顏色和濁度的測定.第1部分:試驗方法
| (Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Part 1 : test method.)
|
| NF P41-211/A1-2000
| DTU 60.31.建筑工程.非塑化聚氯乙烯管道安裝.壓力下冷水.技術規范
| (DTU 60.31 - Building works - Unplasticized polyvinyl chloride piping installation - Cold water under pressure - Technical specifications.)
|
| NF P41-212/A1-2000
| DTU 60.32.建筑工程.非塑化聚氯乙烯管道安裝.雨水下水管道.技術規范
| (DTU 60.32 - Building works - Unplasticized polivinyl chloride piping installation - Rainwater downpipes - Technical specifications.)
|
| NF P41-213-1993
| DTU 60-32.建筑工程.未增塑聚氯乙烯管道安裝.廢水排放.技術規范
| (DTU 60.33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.)
|
| NF P41-213/A1-2000
| DTU 60.33.建筑工程.非塑化聚氯乙烯管道安裝.廢水排水管.技術規范
| (DTU 60.33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.)
|
| NF P41-220/A1-1999
| DTU 60.2.建筑工程.土壤水,雨水,廢水排水鑄鐵管道的技術規范
| (DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.)
|
| NF P41-220/A2-2000
| DTU 60.2.建筑工程.土壤水,雨水,廢水排水鑄鐵管道的技術規范
| (DTU 60.2 - Building works - Cast iron for soil water, rain water and waste water drainage - Technical specifications.)
|
| NF P41-221/A1-1999
| DTU 60.5.建筑工程.銅管道.家用冷熱水供應管道.廢水,雨水排放管和空調安裝管.技術規范
| (DTU 60.5 - Building works - Copper piping. Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditioning installations - Technical specifications.)
|
| NF P41-221/A2-2000
| DTU 60.5.建筑工程.銅管道.家用冷熱水供應管道.廢水,雨水排放管和空調安裝管.技術規范
| (DTU 60.5 - Building works - Coper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditioning installations - Technical specifications.)
|
| NF P41-302-1994
| 纖維水泥制品.壓力管道和接頭(歐洲標準EN 512)
| (Fibre-cement products. Pressure pipes and joints.)
|
| NF P45-200-1998
| 燃?xì)夤?yīng).燃?xì)夤艿拦こ毯徒ㄖ?大于或等于5Bar的最大操作壓力.功能推薦
| (Gas supply - Gas pipework for buildings - Maximum operating pressure inferior or equal to 5 bar - Functional recommendations.)
|
| NF P45-200/A1-2000
| 燃?xì)夤?yīng).建筑物的燃?xì)夤艿拦こ?小于或等于5巴的最大操作壓力.功能推薦
| (Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations.)
|
| NF P45-200/A2-2002
| 燃?xì)夤?yīng).建筑物的燃?xì)夤艿拦こ?高達和包括5巴的最大操作壓力.功能推薦
| (Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations.)
|
| NF P50-749-5-2000
| 建筑物產品和元件的熱性能.實驗室測量熱傳輸性能的評價的特殊標準.第5部分:管道實驗方法測量
| (Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5 : measurements by pipe test methods.)
|
| NF P52-305-1/A1-1999
| DTU 65.10.建筑工程.建筑物內雨水和廢水排空用冷熱壓力水用管道.排空的一般規則.第1部分:技術規范
| (DTU 65.10 - Building works - Piping used for cold and hot pressure water and piping for evacuation waste water and rain water inside buildings - General rules of execution - Part 1 : technical specifications.)
|
| NF P52-305-1/A2-2000
| DTU 65.10.建筑工程.建筑物內雨水和廢水排空用冷熱壓力水用管道.排空的一般規則.第1部分:技術規范
| (DTU 65.10 - Building works - Piping used for cold and hot pressure water and piping for evacuation waste water and rain water inside buildings - General rules of execution - Part 1 : technical specifi)
|
| NF P52-305-2-1993
| DTU 65-10.建筑工程.個人合同.用于冷和熱壓力水和建筑物內排除廢水和雨水的管道的鋪設.排除的一般規則.第2
| (DTU 65-10. BUILDING WORKS. PRIVATE CONTRACTS. PIPING USED FOR COLD AND HOT PRESSURE WATER AND PIPING FOR EVACUATION WASTE WATER AND RAIN WATER INSIDE BUILDINGS. GENERAL RULES OF EXECUTION. PART 2 : SPECIAL CLAUSES.)
|
| NF R95-403-1970
| 雙錐套管道接頭.連接尺寸
| (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.)
|
| NF R95-404-1968
| 錐頸雙拼式管道接頭
| (PIPE FITTINGS IN TWO PARTS WITH TAPERED BEARING.)
|
| NF R95-405-1970
| 雙錐套管道接頭.插入件
| (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. INSERTS.)
|
| NF S31-063-2003
| 聲學.風機和其他風動設備輻射入管道中的聲功率的測定.管道法
| (Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method.)
|
| NF S95-154-1998
| 醫用氣體管道系統.第2部分:麻醉氣體清除處理系統.基本要求
| (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.)
|
| NF S95-154/A1-2000
| 醫用輸氣管道系統.第2部分:麻醉氣體清除處置系統.基本要求
| (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.)
|
| NF S95-155-2000
| 醫用氣體管道系統.第3部分:壓縮醫用氣體管道和真空管道
| (Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.)
|
| NF S95-162-1998
| 醫用氣體管道系統.第1部分:醫用壓縮氣體和真空裝置的終端元件
| (Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.)
|
| NF S95-163-1998
| 醫用氣體管道系統.第4部分:麻醉氣體清除系統的終端元件
| (Medical gas pipeline systems. Part 4 : terminal units for anaesthetic gas scavenging systems.)
|
| NF S95-169-1999
| 與醫用氣體管道系統終端元件連接的流量測量設備
| (Flow-metering devices for connection to terminal units of medical gas pipeline systems.)
|
| NF T47-301-1972
| 橡膠.管道接頭用壓制和模制合成橡膠墊圈和型材.材料的一般特性
| (RUBBER MOLDED AND EXTRUDED SEALING RINGS AND PROFILES FOR PIPE WORK. GENERAL SPECIFICATIONS OF MATERIALS.)
|
| NF T47-305-1/A2-2003
| 彈性密封件.給水排水用管道連接密封件的材料要求.第1部分:硫化橡膠
| (Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 1 : vulcanized rubber.)
|
| NF T47-305-2/A1-2003
| 彈性密封件.給水排水用管道連接密封件的材料要求.第2部分:熱塑彈性體
| (Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 2 : thermoplastic elastomers.)
|
| NF T47-305-3/A1-2003
| 彈性密封件.給水排水用管道連接密封件的材料要求.第3部分:硫化橡膠多孔材料
| (Elastomeric seals - Material requirements for joint seals used in water and drainage applications - Part 3 : cellular materials of vulcanized rubber.)
|
| NF T47-305-4/A1-2003
| 彈性密封件.給水排水用管道連接密封件的材料要求.第4部分:聚氨酯密封鑄件
| (Elastomeric seals - Material requirements for pipe joint seals in water and drainage applications - Part 4 : cast polyurethane sealing elements.)
|
| NF T47-306-2003
| 彈性密封件.輸送氣體和碳?xì)湟后w的管道和配件用密封件的材料要求
| (Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.)
|
| NF T54-006-2003
| 塑料管道系統.未增塑聚氯乙烯管.檢驗規定溫度下抗二氯甲烷的試驗方法
| (Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).)
|
| NF T54-007-1994
| 塑料管道系統.壓力管和配件的機械接合.在恒定應力下抗拔出性能的試驗方法
| (THERMOPLASTICS PIPING SYSTMES. END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS. TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE. (EUROPEAN STANDARD EN 712).)
|
| NF T54-008-1994
| 塑料管道系統.配件和聚烯烴壓力管的機械接合.在彎曲時內部壓力引起的密封性的試驗方法
| (PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING. (EUROPEAN STANDARD EN 713).)
|
| NF T54-009-1994
| 熱塑料管道系統.壓力管和模塑配件的合成橡膠密封環型接合.在無軸向推力時內部流體靜力學壓力下密封性的試驗
| (THERMOPLASTICS PIPING SYSTEMS. NON-END-LOAD-BEARING ELASTOMERIC SEALING RING TYPE JOINTS BETWEEN PRESSURE PIPES AND MOULDED FITTINGS. TEST METHOD FOR LEAKIGHTNESS UNDER INTERNAL HYDROSTATIC PRESSURE WITHOUT END THRUST. (EUROPEAN STANDARD EN 714).)
|
| NF T54-010-1994
| 塑料管道系統.壓力管和配件的機械和膠合接合.在包含軸向推力的內部水壓下密封性的試驗方法
| (THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING JOINTS BETWEEN SMALL DIAMETER PRESSURE PIPES AND FITTINGS. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL WATER PRESSURE, INCLUDING END THRUST. (EUROPEAN STANDARD EN 715).)
|
| NF T54-012-1995
| 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭.外部液壓條件下防漏密封試驗方法
| (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).)
|
| NF T54-015-1997
| 塑料管道系統.熱塑閥門.抗內壓和防泄漏的試驗方法
| (Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.)
|
| NF T54-016-1-1999
| 供水用塑料管道系統.未增塑聚氯乙烯(PVC-U).第1部分:概述
| (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general.)
|
| NF T54-016-2-1999
| 供水用塑料管道系統.未增塑聚氯乙烯(PVC-U).第2部分:管子
| (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes.)
|
| NF T54-016-3-1999
| 供水用塑料管道系統.未增塑聚氯乙烯(PVC-U).第3部分:配件
| (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3 : fittings.)
|
| NF T54-016-4-1999
| 供水用塑料管道系統.未增塑聚氯乙烯.第4部分:管件和附件
| (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.)
|
| NF T54-016-5-1999
| 供水用塑料管道系統.未增塑聚氯乙烯(PVC-U).第5部分:系統使用的適用性
| (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5 : fitness for purpose of the system.)
|
| NF T54-017-1-1999
| 建筑物內土壤和廢物排放用塑料管道系統(低溫和高溫).未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系統的規
| (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the system.)
|
| NF T54-019-1995
| 塑料管道和導管系統.未增塑聚氯乙烯(PVC-U)管和配件.粘度值的測定和K值的計算的樣品制備
| (PLASTICS PIPING AND DUCTING SYSTEMS. PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE. (EUROPEAN STANDARD EN 922).)
|
| NF T54-024-1994
| 塑料管道系統.熱塑塑料管和配件.維卡軟化點的測定
| (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).)
|
| NF T54-025-1995
| 塑料管道系統.熱塑塑料管.恒定低溫度下耐內壓性能的測定
| (Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.)
|
| NF T54-036-1994
| 塑料管道和導管系統.注模熱塑配件.熱效應目視評定的試驗方法
| (Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.)
|
| NF T54-037-1981
| 塑料.未增塑聚氯乙烯管道元件.生活污水無壓排放設備用密封圈接頭.使 用特性
| (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.)
|
| NF T54-041-1994
| 塑料管道系統.壓力管道用彈性密封圈型接頭的熱注塑料配件.耐無軸向力短暫內壓力性能的試驗方法
| (Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.)
|
| NF T54-042-1994
| 塑料管道系統.壓力管道用溶劑-水泥膠合接頭的注模承窩配件
| (Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.)
|
| NF T54-045-1994
| 塑料管道和導管系統.壓力管道系統用熱注塑料配件.最大變形的擠撞試驗法
| (Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.)
|
| NF T54-051-1979
| 聚乙烯管道.機械接頭的載荷減小.試驗方法與規
| (Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.)
|
| NF T54-052-2001
| 人類飲用水輸送用塑料管道系統.遷移評定.塑料管和配件及其接頭遷移值的測定
| (Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.)
|
| NF T54-054-1997
| 塑料管道系統.未增塑聚氯乙烯端點負載軸承雙插座連接件.當彎曲和受到內壓時測定其防漏性和強度的試驗方法
| (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.)
|
| NF T54-059-1995
| 壓力管道和配件用熱塑性塑料.分類和名稱與符號.總體設備的設計系數
| (Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service (design) coefficient.)
|
| NF T54-062-1-1999
| 建筑物內污物和污水排放(低、高溫)用塑料管道系統.聚丙烯(PP).第1部分:管道、配件和系統規范
| (Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.)
|
| NF T54-063-1-2003
| 供水用塑料管道系統.聚乙烯.第1部分:總則
| (Plastics piping systems for water supply - Polyethylene (PE) - Part 1 : general.)
|
| NF T54-063-2-2003
| 供水用塑料管道系統.聚乙烯.第2部分:管道
| (Plastics piping systems for water supply - Polyethylene (PE) - Part 2 : pipes.)
|
| NF T54-063-3-2003
| 供水用塑料管道系統.聚乙烯.第3部分:配件
| (Plastics piping systems for water supply - Polyethylene (PE) - Part 3 : fittings.)
|
| NF T54-063-4-2003
| 供水用塑料管道系統.聚乙烯(PE).第4部分:閥
| (Plastics piping systems for water supply - Polyethylene (PE) - Part 4 : valves.)
|
| NF T54-063-5-2003
| 供水用塑料管道系統.聚乙烯.第5部分:系統適用性
| (Plastics piping systems for water supply - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
|
| NF T54-065-1-2003
| 氣體燃料的塑料管道供應系統.聚乙烯(PE).第1部分:總則
| (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.)
|
| NF T54-065-2-2003
| 氣體燃料的塑料管道供應系統.聚乙烯(PE).第2部分:管道
| (Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.)
|
| NF T54-065-3-2003
| 氣體燃料的塑料管道供應系統.聚乙烯(PE).第3部分:配件
| (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.)
|
| NF T54-065-4-2003
| 氣體燃料的塑料管道供應系統.聚乙烯(PE).第4部分:閥門
| (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.)
|
| NF T54-065-5-2003
| 氣體燃料的塑料管道供應系統.聚乙烯(PE).第5部分:系統的配合
| (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
|
| NF T54-075-1997
| 塑料管和管道系統.聚烯烴管和配件.氧化時間的測定(歐洲標準EN 728)
| (Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.)
|
| NF T54-076-1992
| 塑料.聚乙烯塑料管道系統.標稱外徑125以上導管的耐緩慢龜裂性.試驗方法
| (Plastics. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter over 125. Test method.)
|
| NF T54-077-1992
| 塑料.聚乙烯塑料管道系統.標稱外徑125及其以下導管的耐緩慢龜裂性.試驗方法
| (Plastic. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter up to 125. Test method.)
|
| NF T54-078-1992
| 塑料.塑料管道系統用聚乙烯.極限應力強度因數的測定.試驗方法
| (Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.)
|
| NF T54-087-1993
| 塑料管道系統.交聯聚乙烯(PE-X)管.溶劑萃取法測定交聯度
| (PLASTICS PIPING SYSTEMS. CROSSLINKED POLYETHYLENE (PE-X) PIPES. DETERMINATION OF DEGREE OF CROSSLINKING BY SOLVENT EXTRACTION. (EUROPEAN STANDARD EN 579).)
|
| NF T54-097-1995
| 塑料管道系統.熱塑管.耐連續吹風的試驗方法
| (Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.)
|
| NF T54-100-1997
| 塑料管道系統.熱塑閥門.外部送風后閥門完好性的測試方法
| (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.)
|
| NF T54-300-1-2003
| 普通用水、排水、污水地上和地下壓力系統用塑料管道系統.聚乙烯(PE).第1部分:總則
| (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.)
|
| NF T54-300-2-2003
| 普通用水、排水、污水地上和地下壓力系統用塑料管道系統.聚乙烯(PE).第2部分:管道
| (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.)
|
| NF T54-300-3-2003
| 普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第3部分:管件
| (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.)
|
| NF T54-300-4-2003
| 普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第4部分:閥門
| (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.)
|
| NF T54-300-5-2003
| 普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第5部分:系統的適用性
| (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
|
| NF T54-900-2003
| 塑料管道和導管系統.用外推法測定熱塑性塑料管道的長期靜液壓強度
| (Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.)
|
| NF T54-901-1995
| 塑料管道系統.非壓力設備用熱塑管道系統.不透水性試驗方法(歐洲標準EN 1053)
| (Plastics piping systems. Thermoplastics piping systems for non-pressure applications. Test method for watertightness.)
|
| NF T54-902-1995
| 塑料管道系統.土壤和廢料排出用熱塑管道系統.粘接處密封度試驗方法
| (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.)
|
| NF T54-903-1996
| 塑料管道系統.建筑物內排水管用熱塑制管道系統.可載溫度負荷的檢驗方法
| (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.)
|
| NF T54-904-1996
| 塑料管線和管道系統.塑料管和配件.暴露在直接(自然)風化的方法
| (PLASTICS PIPING AND DUCTING SYSTEMS. PLASTICS PIPES AND FITTINGS. METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING. (EUROPEAN STANDARD EN 1056).)
|
| NF T54-905-2002
| 塑料管道系統.熱塑性壓力管用端部承載或非端部承載組件和接頭.內部水壓下長期無漏損的試驗方法
| (Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.)
|
| NF T54-906-1996
| 塑料管道系統.埋置非壓管道設備用熱塑管道系統.彈性密封環型接頭耐泄漏性試驗方法
| (Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test methods for leaktightness of elastomeric sealing ring type joints.)
|
| NF T54-911-1995
| 熱塑管道.潛伸率的測定
| (THERMOPLASTICS PIPES. DETERMINATION OF CREEP RATIO. (EUROPEAN STANDARD EN ISO 9967).)
|
| NF T54-912-1995
| 熱塑.管道.環硬性的測量
| (THERMOPLASTICS. PIPES. DETERMINATION OF RING STIFFNESS. (EUROPEAN STANDARD EN ISO 9969).)
|
| NF T54-913-1996
| 塑料管道及保護管系統.熱塑管.環形撓形測定
| (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. DETERMINATION OF RING FLEXIBILITY. (EUROPEAN STANDARD EN 1446).)
|
| NF T54-914-1-2000
| 建筑物內污物和污水排放(低、高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道,配件和系統規
| (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : requirements for pipes, fittings and th)
|
| NF T54-915-1-2000
| 建筑物內土和廢物排放(高溫和低溫)用結構壁管的塑料管道系統.未增塑聚氯乙烯管(PVC-U).第1部分:管道和系統
| (Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for p)
|
| NF T54-917-1-2000
| 建筑物內污物和污水排放(低、高溫)用塑料管道系統.聚乙烯(PE).第1部分:管道,配件和系統規范
| (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.)
|
| NF T54-918-1-1999
| 建筑物內污物和污水排放(低、高溫)用塑料管道系統.苯乙烯共聚物混合物(SAN+PVC).第1部分:管道,配件和系統規
| (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Part 1 : specifications for pipes, fittings and the system.)
|
| NF T54-919-1-1999
| 建筑物內污物和污水排放(低、高溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).第1部分:管道,配件和系統規范
| (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : specifications for pipes, fittings and the system.)
|
| NF T54-920-1997
| 塑料管道系統.聚乙烯管道系統用閥門.在工作機構彎頭處和彎頭之后的防漏試驗方法(歐洲標準EN 1680)
| (Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.)
|
| NF T54-921-1997
| 塑料管道系統.熱塑閥門.彎曲下溫度周期變化后閥門完好性的測試方法
| (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.)
|
| NF T54-922-1997
| 塑料管道系統.聚乙烯放液T形管.組裝放液T形管耐沖擊的試驗方法(歐洲標準EN 1716)
| (Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee.) |
| NF T54-923-2000
| 塑料管道系統.與未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯彈性密封環式套筒接頭.負壓下密封試驗法
| (Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.)
|
| NF T54-924-1999
| 塑料管道系統.未增塑聚(氯乙烯)(PVC-U)配件和材料.依據總氯含量的PVC含量的估計方法(EN 1905)
| (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content.)
|
| NF T54-925-1999
| 塑料管道系統.熱塑螺旋成型承重管道.接縫處抗拉強度的測定
| (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES. DETERMINATION OF THE TENSILE STRENGTH OF A SEAM. (EUROPEAN STANDARD EN 1979).)
|
| NF T54-926-2000
| 熱塑性管道系統.地下常壓排污設施用接頭.用密封壓力評定法測定帶熱塑性彈性體(TPE)密封件接頭的長期密封性
| (Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the)
|
| NF T54-927-1999
| 塑料管道系統.熱塑配件.沖擊強度的試驗方法(EN 12061)
| (PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. (EUROPEAN STANDARD EN 12061).)
|
| NF T54-928-1997
| 塑料管道系統.雨水排放管道系統用托架.托架強度的測試方法 12095)
| (Plastics piping system. Brackets for rainwater piping systems. Test method for bracket strength.)
|
| NF T54-929-1997
| 塑料管道系統:聚乙烯管用材料和元件.揮發物含量測定
| (Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content.)
|
| NF T54-930-1997
| 塑料管道系統.聚乙烯(PE)閥.支架間耐彎曲試驗方法
| (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.)
|
| NF T54-931-1997
| 塑料管道系統.聚乙烯(PE)管.擠出后耐內壓試驗方法
| (PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF. (EUROPEAN STANDARD EN 12106).)
|
| NF T54-932-1997
| 塑料管道系統.注模熱塑配件配件、閥和附屬設備.管道元件注模用熱塑材料長期液壓強度的測定
| (Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.)
|
| NF T54-934-1997
| 塑料管道系統.管件,閥和附件.氣流率/壓降關系的測定
| (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)
|
| NF T54-935-1997
| 塑料管道系統.比色法測定熱塑材料的含水量
| (Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.)
|
| NF T54-936-1997
| 塑料管道系統.聚乙烯(PE)閥.耐熱循環試驗方法(歐洲標準EN 12119)
| (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling.)
|
| NF T54-937-2000
| 塑料管道系統.與未增塑聚氯乙烯管一起使用的彈性密封環式套筒接頭.內壓下角度偏轉密封試驗法
| (Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang)
|
| NF T54-939-1998
| 塑料管道系統.熱塑塑料配件.組裝配件的機械拉伸強度或柔韌性的試驗方法
| (Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.)
|
| NF T54-940-1999
| 塑料管道系統.冷熱水輸送用熱塑性管和配件.安裝組件耐溫度循環的試驗方法
| (PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS FOR HOT AND COLD WATER. TEST METHOD FOR THE RESISTANCE OF MOUNTED ASSEMBLIES TO TEMPETARURE CYCLING. (EUROPEAN STANDARD EN 12293).)
|
| NF T54-941-1999
| 塑料管道系統.熱水和冷水系統.真空密封性的檢驗方法
| (Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.)
|
| NF T54-942-1999
| 塑料管道系統.輸送熱水和冷水用的熱塑管和附屬配件.連接件對壓力變化負載的穩定性的檢測方法
| (Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling.)
|
| NF T54-946-2003
| 工業用塑料管道系統.聚丁烯(PE)、聚乙烯(PE)和聚丙烯(PP).元件和系統規范.米制系列
| (Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series.)
|
| NF T54-949-2003
| 翻新用塑料管道系統的分類和設計指南
| (Guidance on the classification and design of plastics piping systems used for renovation.)
|
| NF T54-956-2003
| 塑料管道系統.塑料管道和配件.暴露于自然風化下的方法
| (Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (naturel) weathering.)
|
| NF T54-965-2003
| 氣態燃料供應用塑料管道系統.聚乙烯(PE).管的包裝、存儲、搬運和運輸用規范
| (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Specifications for the packaging, the storage, the handling and the transportation of the pipes.)
|
| NF T57-204-1996
| 塑料管道系統.玻璃增強熱固性塑料(GRP)管.耐長期內部壓力性能的測定
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of long-term resistance to internal pressure.)
|
| NF T57-210-1994
| 塑料管道系統.玻璃纖維增強塑料部件.用重力法測定組分用量
| (Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method.)
|
| NF T57-211-1994
| 塑料管道系統.玻璃增強熱固性塑料管和配件.回歸分析及其使用方法
| (Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use.)
|
| NF T57-212-1994
| 塑料管道系統.玻璃增強熱固性管子.干燥條件蠕變系數的測定
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.)
|
| NF T57-214-1-1998
| 地下排水系統和壓力下污水排放的塑料管道系統.基于不飽和聚酯 樹脂(UP)的玻璃增強熱固塑料.第1部分:一般性(
| (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.)
|
| NF T57-214-3-1996
| 壓力下地下排水系統用塑料管道系統.不飽和聚酯樹脂基玻璃增強熱固塑料.第3部分:配件
| (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.)
|
| NF T57-214-5-1996
| 壓力下地下排水系統用塑料管道系統.不飽和聚酯樹脂基玻璃增強熱固塑料.第5部分:接頭的適用性
| (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.)
|
| NF T57-215-1996
| 塑料管道系統.玻璃增強熱固性塑料管和配件接頭.撓性和鉸鏈接頭耐泄漏和損傷試驗方法
| (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.)
|
| NF T57-216-1996
| 塑料管道系統.玻璃增強熱固塑料管和配件.撓曲條件下部件內部耐化學侵蝕性的測定
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition.)
|
| NF T57-217-1996
| 塑料管道系統.玻璃纖維增強熱固性塑料管.潮濕條件下蠕變因子的測定和長期指定環的硬度的計算
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness.)
|
| NF T57-218-1996
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK).檢驗原有環撓曲的試驗方法
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection.)
|
| NF T57-219-1999
| 塑料管道系統. 玻璃增強的熱固塑料管(GRP).在潮濕條件下長臨界相關環變形的測定(EN 1227)
| (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions.)
|
| NF T57-220-1996
| 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管.測定指定環初始硬度
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.)
|
| NF T57-221-1996
| 塑料管道系統.玻璃纖維增強熱固塑料管和配件.短期內部壓力下管壁密封性的檢驗的試驗方法
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure.)
|
| NF T57-222-1996
| 塑料管道系統.玻璃纖維增強熱固塑料管.初始縱向拉伸性能的測定
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties.)
|
| NF T57-223-1996
| 塑料管道系統.玻璃增強熱固性塑料(GRP)管.初期表面抗拉強度的測定
| (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength.)
|
| NF T57-224-1997
| 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)構件.檢驗帶有彈性密封件的剛性鎖定的管套筒接頭設計的試驗方法
| (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.)
|
| NF T57-225-1997
| 塑料管道系統.玻璃纖維增強熱固性塑料元件.驗證膠合管套筒接頭設計的測試方法
| (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.)
|
| NF T57-226-1996
| 塑料管道系統.玻璃增強熱固性塑料元部件.栓結法蘭聯軸節的設計驗證試驗方法
| (Plastics piping systems. Glas-reinforced thermosetting plastics (grp) components. Test methods to prove the design of bolted flange joints.)
|
| NF T57-227-1997
| 塑料管道系統.玻璃增強熱固性塑料(GRP)管.周期性內部壓力影響的試驗方法
| (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure.)
|
| NF T57-229-1997
| 塑料管道系統.玻璃纖維增強熱固性塑料管.在化學環境下存放后相對彎曲蠕變系數的測定
| (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.)
|
| NF T76-320-2003
| 熱塑性管道系統用膠粘劑.膠粘劑熱穩定性測定的試驗方法
| (Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives.)
|
| NF X08-101-1978
| 管道通用顏色.管道通用顏色的幾種基本顏料一覽表
| (CONVENTIONAL COLOURS FOR PIPING. TABLE OF BASIC PIGMENTS FOR USE IN THE PRODUCTION OF CONVENTIONAL COLOURS FOR PIPING.)
|
| NF X08-104-1987
| 顏色.鋼鐵工廠.管道系統的標記
| (Colours. Iron and stellfactories. Marking of fluids in pipes.)
|
| NF X08-105-1986
| 顏色.化學工廠.管道系統的標記
| (Colours. Chemical factories. Marking of fluids in pipes.)
|
| NF X10-100-1993
| 封閉管道中流體流量的測量.詞匯和符號
| (Measurement of fluid flow in closed conduits. Vocabulary and symbols.)
|
| NF X10-102-1-2003
| 用插入圓截面滿載管道中的壓差裝置測量流體流量.第1部分:一般原理和要求
| (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1 : general principles and requirements.)
|
| NF X10-102-2-2003
| 用插入圓截面管道中的壓差裝置測量流體流量.第2部分:節流孔板
| (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2 : orifice plates.)
|
| NF X10-102-3-2003
| 用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴
| (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3 : nozzles and Venturi nozzles.)
|
| NF X10-102-4-2003
| 用插入圓截面管道中的壓差裝置測量流體流量.第4部分:文杜利管
| (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4 : Venturi tubes.)
|
| NF X10-112-1977
| 密封管道中液體流量的測定.均勻流量速度場的雙皮托管測量法
| (MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITES.VELOCITY AREA METHOD USING PITOT STATIC TUBES.)
|
| NF X10-113-1982
| 圓截面密封管道中液體流量的測定.剖面上一點流速的測定方法
| (DETERMINATION OF FLOWRATE OF FLUIDS IN CLOSED CONDUITS OF CIRCULAR CROSS-SECTION. METHOD OF VELOCITY MEASUREMENT AT ONE POINT OF THE CROSS-SECTION.)
|
| NF X10-121-1993
| 封閉管道中流體流量的測量.液體電磁流量計的性能評定法
| (Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.)
|
| NF X10-131-1974
| 密封管道中水流量的測定.示蹤法.第1部分：綜合
| (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS.TRACER METHODS PART I:GENERAL)
|
| NF X10-132-1975
| 密封管道中水流量的測定.示蹤法.第2部分：使用非放射性示蹤物的恒流量噴射法
| (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS PART II : CONSTANT RATE INJECTION METHOD USING NON-RADIOACTIVE TRACERS)
|
| NF X10-133-1977
| 密封管道中水流量的測定.示蹤法.第3部分：放射性示蹤物恒流量噴射法
| (MEASUREMENT OF WATER FLOW RATE IN CLOSED CONDUITS. TRACER METHODS. PART III: CONSTANT RATE INJECTION METHOD USING RADIOACTIVE TRACERS.)
|
| NF X10-136-1977
| 密封管道中水流量的測定.示蹤法.第6部分：非放射性示蹤物的過渡時間法
| (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS-PAR VI:TRANSIT TIME METHOD USING NON-RADIOACTIVE TRACERS.)
|
| NF X10-137-1977
| 密封管道中水流量的測定.示蹤法.第7部分：放射性示蹤物的過渡時間法
| (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS. PART VII:TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.)
|
| NF X10-141-1982
| 密封管道中氣體流量的測定.示蹤法.第1部分：綜合
| (Measurement of gas flow in conduits. Tracer methods. Part 1 general.)
|
| NF X10-144-1982
| 密封管道中氣體流量的測定.示蹤法.第4部分：放射性示蹤物的過渡時間法
| (MEASUREMENT OF GAS FLOW IN CONDUITS. TRACER METHODS. PART 4 : TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.)
|
| NF X10-145-1991
| 稱重法測量封閉管道里的流體流量.測量裝置的檢驗.第1部分:靜態裝置
| (MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS BY THE WEIGHING METHOD. PROCEDURES FOR CHECKING INSTALLATIONS. PART 1 : STATIC WEIGHING SYSTEM.)
|
| NF X42-119-2001
| 生物技術.管道和儀表的性能標準.第1部分:一般性能標準
| (Biotechnology - Performance criteria for piping and instrumentation - Part 1 : general performance criteria.)
|
| NF X42-125-2001
| 生物技術.管道和儀表的性能標準.第2部分:耦合
| (Biotechnology - Performance criteria for piping and instrumentation - Part 2 : couplings.)
|
| NF X42-127-2001
| 生物技術.管道和儀表的性能標準.第3部分:取樣和接種裝置
| (Biotechnology - Performance criteria for piping and instrumentation - Part 3 : sampling and inoculation devices.)
|
| NF X42-128-2001
| 生物技術.管道和儀表的性能標準.第4部分:管和管道
| (Biotechnology - Performance criteria for piping and instrumentation - Part 4 : tubes and pipes.)
|
| NF X42-129-2001
| 生物技術.管道和儀表的性能標準.第5部分:閥門
| (Biotechnology - Performance criteria for piping and instrumentation - Part 5 : valves.)
|
| NF X42-132-2001
| 生物技術.管道和儀表的性能標準.第6部分:設備探頭
| (Biotechnology - Performance criteria for piping and instrumentation - Part 6 : equipment probes.)
|
| NF X43-285-1997
| 工作場地的大氣環境.短期探測器管道測量系統.要求和測試方法
| (WORKPLACE ATMOSPHERES. SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1231).)
|
| NF X50-001-7-1-2000
| 動力站設備和系統的征購指南.第7部分:管道和閥門.第1節:高壓管道系統
| (Guide for procurement of power station plant, equipement and systems - Part 7 : pipework and valves - Section 1 : high pressure piping systems.)
|
| NF X50-001-7-2-2000
| 動力站設備和系統的征購指南.第7部分:管道和閥門.第2節:鍋爐和高壓管道閥門
| (Guide for procurement of power station plant, equipment and systems - Part 7 : pipework and valves - Section 2 : boiler and high pressure piping valves.)
|
| XP T54-034-1999
| 塑料.在液態食物,熱水,工業用液體壓力下傳輸用未增塑聚(氯乙烯)(PVC-U)管道.增壓液體用減速規則的制定和規
| (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) piping for conveyance under pressure of liquid foodstuffs, thermal water and industrial liquids - Specifications and setting of the derating rules for pressurized liquids.)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|