| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 5499-1-2002
| 圖形符號和標志.包括消防安全標志在內的安全性標志.幾何圖形、顏色和布置規范
| Graphical symbols and signs - Safety signs, including fire safety signs - Specification for geometric shapes, colours and layout
|
| BS 5499-10-2006
| 包括防火安全標志的安全標志.包括防火安全標志的安全標志使用實施規則
| Safety signs, including fire safety signs - Code of practice for the use of safety signs, including fire safety signs
|
| BS 5499-11-2002
| 圖形符號和標志.安全標志，包括防火安全標志.水域安全性標志
| Graphical symbols and signs - Safety signs, including fire safety signs - Water safety signs
|
| BS 5499-2-1986
| 消防安全標志、通告和圖形符號.第2部分:自發光標記規范
| Fire safety signs, notices and graphic symbols - Specification for self-luminous fire safety signs
|
| BS 5499-4-2000
| 消防安全標志、包括防火災安全符號.逃離路線標記的實施規程
| Safety signs, including fire safety signs - Code of practice for escape route signing
|
| BS 5499-5-2002
| 圖形符號和標志.安全性標志，包括防火安全標志.含有特殊安全性意義的標志
| Graphical symbols and signs - Safety signs, including fire safety signs - Signs with specific safety meanings
|
| BS 5499-6-2002
| 圖形符號和標志.包括防火安全標志的安全標志.用于安全標志的圖形符號的形成和設計.要求
| Graphical symbols and signs - Safety signs, including fire safety signs - Creation and design of graphical symbols for use in safety signs - Requirements
|
| BS 6854-1-1987
| 木工機械安全裝置實用規程.第1部分:一般推薦標準
| Code of practice for safeguarding woodworking machines. General recommendations
|
| BS 6854-2-1988
| 木工機械安全裝置實用規程.第2部分:圓鋸木機(裝有旋轉刀具的圓形鋸木機)
| Code of practice for safeguarding woodworking machines. Circular sawing machines (sawing machines with rotating tools)
|
| BS 6854-3-1989
| 木工機械安全裝置實用規程.第3部分:垂直主軸制模、造模銑和成形機械(用于單面修整的制模機)
| Code of practice for safeguarding woodworking machines. Vertical spindle moulding, routing and shaping machines (moulding machines for one side dressing)
|
| BS 6854-5-1989
| 木工機械安全裝置實用規程.第5部分:窄帶鋸木機
| Code of practice for safeguarding woodworking machines. Narrow band sawing machines
|
| BS 6912-19-1996
| 土方機械安全.機械操作人員座椅的尺寸和要求用規范
| Safety of earth-moving machinery - Specification for dimensions and requirements for operator's seat
|
| BS 6912-20-1996
| 運土機械安全性.操作者控制系統
| Safety of earth-moving machinery - Specification for operator's controls
|
| BS 6912-21-1996
| 運土機械安全性.照明、信號燈和標記燈、以及反射式反射鏡裝置
| Safety of earth-moving machinery - Specification for lighting, signalling and marking lights, and reflex-reflector devices
|
| BS 6912-22.1-1996
| 運土機械安全性.第22部分:駕駛室環境.第1節:綜述和定義
| Safety of earth-moving machinery - Operator enclosure environment - General and definitions
|
| BS 6912-22.2-1996
| 運土機械安全性.第22部分:駕駛室環境.第2節:空氣過濾器試驗
| Safety of earth-moving machinery - Operator enclosure environment - Air filter test
|
| BS 6912-22.3-1996
| 運土機械安全性.第22部分:駕駛室環境.第3節:駕駛室增壓試驗方法
| Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure pressurization test method
|
| BS 6912-22.4-1996
| 運土機械安全性.第22部分:駕駛室環境.第4節:駕駛室的通風、加熱和/或空調試驗法
| Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure ventilation, heating and/or air-conditioning test method
|
| BS 6912-22.5-1996
| 運土機械安全性.第22部分:駕駛室環境.第5節:擋風玻璃解凍系統試驗方法
| Safety of earth-moving machinery - Operator enclosure environment - Windscreen defrosting system test method
|
| BS 6912-22.6-1996
| 運土機械安全性.第22部分:駕駛室環境.第6節:駕駛室上面太陽能加熱效應的測定
| Safety of earth-moving machinery - Operator enclosure environment - Determination of the effect of solar heating on the operator enclosure
|
| BS 6912-23-1996
| 運土機械安全性.第23部分:安全信號和危險圖號.一般原理
| Safety of earth-moving machinery - Safety signs and hazard pictorials - General principles
|
| BS 6912-5-1992
| 運土機械安全性.第5部分:最小入口尺寸推薦標準
| Safety of earth-moving machinery. Recommendations for minimum access dimensions
|
| BS 6912-8-1992
| 運土機械安全性.第8部分:鉸接式車架鎖緊裝置的性能要求規范
| Safety of earth-moving machinery - Specification for performance requirements of an articulated frame locking device
|
| BS 7907-1997
| 提高機械安全性的兒童服裝設計和生產實用規程
| Code of practice for the design and manufacture of children's clothing to promote mechanical safety
|
| BS 848-5-1999
| 一般用途風扇.機械安全專用(保護)
| Fans for general purposes - Special for mechanical safety (guarding)
|
| BS DD CLC/TS 50418-2004
| 機械安全.電感防護設備.無源紅外線防護設備(PIPDs)
| Safety of machinery - Electro-sensitive protective equipment - Passive infra-red protective devices (PIPDs)
|
| BS DD CLC/TS 61496-2-2004
| 機械安全.電感防護設備.使用有源光電防護器件的設備的特殊要求
| Safety of machinery - Electro-sensitive protective equipment - Particular requirements for equipment using active opto-electronic protective devices (AOPD)
|
| BS DD CLC/TS 61496-3-2004
| 機械安全.電感防護設備.響應漫反射的有源光電防護設備的特殊要求(AOPDDR)
| Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
|
| BS DD CLC/TS 62046-2005
| 機械安全.檢測時人的防護設備的應用
| Safety of machinery - Application of protective equipment to detect the presence of persons
|
| BS DD ENV 581-2-2000
| 室外家具.野營、家用和工作用桌椅.桌椅的機械安全性要求和試驗方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for seating
|
| BS EN 1005-2-2003
| 機械安全.人體特性.機械和機械元部件的人工搬運
| Safety of machinery - Human physical performance - Manual handling of machinery and component parts of machinery
|
| BS EN 1005-3-2002
| 機械安全.人體特性.機械操作的推薦使用的力極限值
| Safety of machinery - Human physical performance - Recommended force limits for machinery operation
|
| BS EN 1005-4-2005
| 機械安全.人體特性.有關機械的工作姿勢和活動的評價
| Safety of machinery - Human physical performance - Evaluation of working postures and movements in relation to machinery
|
| BS EN 1005-5-2007
| 機械安全.人體特性.高頻率重復操作的風險評估
| Safety of machinery - Human physical performance - Risk assessment for repetitive handling at high frequency
|
| BS EN 1010-1-2004
| 機械安全.印刷和紙加工機械的設計和建造的安全要求.通用要求
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Common requirements
|
| BS EN 1010-2-2006
| 機械安全性.印刷機和換紙機的設計和建造的安全要求.包括預壓機械的印刷機和涂漆機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
|
| BS EN 1010-3-2003
| 機械安全.印刷和紙加工機械的設計和制造的安全要求.切紙機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines
|
| BS EN 1010-4-2004
| 機械安全.設計和生產打印機和紙加工機的安全要求.裝訂機、紙加工機和裝飾機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Bookbinding, paper converting and finishing machines
|
| BS EN 1023-2-2000
| 辦公家具.遮板.機械安全性要求
| Office furniture - Screens - Mechanical safety requirements
|
| BS EN 1034-13-2005
| 機械安全.造紙和整飾機械的設計和建造用安全要求.第13部分:貨物和裝置除線用機器
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
|
| BS EN 1034-14-2005
| 機械安全.造紙機械和精整機設計和結構的安全要求.卷紙切紙機
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter
|
| BS EN 1034-2-2005
| 機械安全.造紙機和修整機的設計和建造的安全要求.第2部分:鼓式剝皮機
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
|
| BS EN 1034-22-2005
| 機械安全.紙張制造和整飾機械設計和建造的安全要求.碎木機
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Woodgrinders
|
| BS EN 1034-4-2005
| 機械安全.造紙機械和精整機設計和結構的安全要求.碎漿機和裝載工具
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities
|
| BS EN 1034-6-2005
| 機械安全.造紙和整飾機械的設計和建造用安全要求.第6部分:砑光機
| Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender
|
| BS EN 1034-7-2005
| 機械安全.紙張制造和整飾機械設計和建造的安全要求.箱
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
|
| BS EN 1088 1995 + A1-1996
| 機械安全.與保護裝置結合的聯鎖裝置.設計和選擇原則
| Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
|
| BS EN 1093-2-2006
| 機械安全.空氣中有害物質排放的評估.特定污染物排放率測量用示蹤氣體法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given pollutant
|
| BS EN 1093-3-2006
| 機械安全.空氣中有害物質排放的評估.第3部分:特定污染物排放率的測量用試驗臺方法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
|
| BS EN 1093-4-1996
| 機械安全.空氣中有害物質排放的評估.除塵系統的吸收效率.示蹤法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Capture efficiency of an exhaust system - Tracer method
|
| BS EN 12198-1-2000
| 機械安全.評估和降低機器輻射產生的風險.總則
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - General principles
|
| BS EN 12198-2-2002
| 機械安全.由機器輻射而產生的危害的評估和降低.輻射測量規程
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Radiation emission measurement procedure
|
| BS EN 12198-3-2002
| 機械安全.機器輻射而產生的風險的評估和降低.通過衰減或屏蔽降低輻射
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Reduction of radiation by attenuation or screening
|
| BS EN 12750-2001
| 木工機械安全性.四邊造型機
| Safety of woodworking machines - Four-sided moulding machines
|
| BS EN 12779-2005
| 木工機械安全.帶固定裝置的碎屑和灰塵排放裝置.安全相關性能和安全要求
| Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements
|
| BS EN 12786-1999
| 機械安全.安全標準中振動條款編寫指南
| Safety of machinery - Guidance for the drafting of vibration clauses of safety standards
|
| BS EN 13210-2004
| 兒童護理用品.兒童安全背帶、學步繩和類似物品.安全要求和試驗方法
| Child care articles - Children's safety harnesses, reins and similar type articles - Safety requirements and test methods
|
| BS EN 13478-2002
| 機械安全性.防火與消防措施
| Safety of machinery - Fire prevention and protection
|
| BS EN 13675-2004
| 機械安全.管道成型和軋制機及其精整作業線設備的安全要求
| Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
|
| BS EN 13861-2002
| 機械安全.機械設計中人類工效學應用指南
| Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
|
| BS EN 14010-2004
| 機械安全.摩托車的動力傳動停車設備.設計、生產、裝配和交付使用階段的安全和EMC要求
| Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
|
| BS EN 14656-2006
| 機械安全.鋼和有色金屬用擠壓機的安全要求
| Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
|
| BS EN 14673-2006
| 機械安全.鋼和有色金屬鍛制的液壓動力開模熱鍛鍛壓機的安全要求
| Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
|
| BS EN 1746-1999
| 機械安全.安全標準噪聲條款編寫指南
| Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
|
| BS EN 1760-1-1998
| 機械安全.壓力敏感防護裝置.壓力敏感墊和壓力敏感地板的設計和試驗通用規則
| Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
|
| BS EN 1760-2-2001
| 機械安全.壓敏防護裝置.壓敏墊和壓敏樓板設計和試驗通用規則
| Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
|
| BS EN 1760-3-2004
| 機械安全.壓敏防護裝置.壓敏減震器、板材、線材和類似設備的設計和試驗通用規則
| Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
|
| BS EN 1807-1999
| 木工機械安全.帶鋸機械
| Safety of woodworking machines - Band sawing machines
|
| BS EN 1837-1999
| 機械安全.機械的整體照明
| Safety of machinery - Integral lighting of machines
|
| BS EN 1870-1-2007
| 木工機械安全.圓盤鋸機床.圓盤鋸架(帶和不帶滑動臺)、方板鋸和建筑工地用鋸
| Safety of woodworking machines - Circular sawing machines - Circular saw benches (with and without sliding table), dimension saws and building site saws
|
| BS EN 1870-16-2005
| 木工機械安全.圓盤鋸床.V切割用雙斜角鋸床
| Safety of woodworking machines - Circular sawing machines - Double mitre sawing machines for V-cutting
|
| BS EN 1870-3-2001
| 木工機械安全.圓盤鋸床.下橫切鋸、兩用下橫切鋸和圓鋸臺
| Safety of woodworking machines - Circular sawing machines - Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
|
| BS EN 294-1992
| 機械安全.避免上肢可觸及危險區的安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs
|
| BS EN 294-1992
| 機械安全.避免上肢可觸及危險區的安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs
|
| BS EN 349-1993
| 機械安全.避免擠壓人體各部位的最小空間
| Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
|
| BS EN 4057-405-2005
| 導線電纜扎匝.試驗方法.第405部分:羅盤安全距離
| Cable ties for harnesses - Test methods - Part 405: Compass safe distance
|
| BS EN 414-2000
| 機械安全性.安全性標準的起草和報批規則
| Safety of machinery - Rules for the drafting and presentation of safety standards
|
| BS EN 415-5-2006
| 包裝機械安全.包裝機械
| Safety of packaging machines - Wrapping machines
|
| BS EN 415-7-2006
| 包裝機械安全.組件和二次包裝機械
| Safety of packaging machines - Group and secondary packaging machines
|
| BS EN 474-3-1996
| 土方機械安全性.第3部分:裝載機的要求
| Earth-moving machinery - Safety - Requirements for loaders
|
| BS EN 474-4-1996
| 土方機械安全性.第4部分:反鏟裝載機的要求
| Earth-moving machinery - Safety - Requirements for backhoe loaders
|
| BS EN 50144-2-15-2001
| 手持電動工具的安全.樹籬修剪機的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for hedge trimmers
|
| BS EN 50144-2-16-2003
| 手持電動工具的安全.用平頭釘釘東西的工具的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for tackers
|
| BS EN 50144-2-3-2002
| 手持電動工具的安全.研磨機、圓盤砂輪機和拋光機的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers
|
| BS EN 50144-2-7-2001
| 手持電動工具的安全性.噴槍專門要求
| Safety of hand-held electric motor operated tools - Particular requirements for spray guns
|
| BS EN 527-2-2003
| 辦公家具.工作臺和寫字臺.機械安全要求
| Office furniture - Work tables and desks - Mechanical safety requirements
|
| BS EN 574-1997
| 機械安全性.雙柄控制裝置.功能特性.設計原理
| Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
|
| BS EN 581-3-2007
| 戶外家具.野營、家用和辦公用座椅和桌子.桌子的機械安全要求和試驗方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for tables
|
| BS EN 60204-1-2006
| 機械安全性.機械用電氣設備.一般要求
| Safety of machinery - Electrical equipment of machines - General requirements
|
| BS EN 60204-32-1998
| 機械安全性.機械用電氣設備.提升機要求
| Safety of machinery - Electrical equipment of machines - Requirements for hoisting machines
|
| BS EN 60745-2-1-2003
| 手持式電動工具的安全.電鉆和沖擊鉆的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for drills and impact drills
|
| BS EN 60745-2-11-2003
| 手持式電動工具的安全.往復鋸(曲線鋸和刀鋸)的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)
|
| BS EN 60745-2-12-2003
| 手持式電動工具的安全.混凝土振搗器的特殊要求
| Hand-held motor-operated electric tools - Safety Part 2-12:Particular requirements for concrete vibrators
|
| BS EN 60745-2-17-2003
| 手持式電動工具的安全.木銑和修整機的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers
|
| BS EN 60745-2-2-2003
| 手持式電動工具的安全.電動旋具和沖擊扳手的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for screwdrivers and impact wrenches
|
| BS EN 60745-2-4-2003
| 手持式電動工具的安全.盤式除外的砂輪機和拋光機的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type
|
| BS EN 60745-2-5-2003
| 手持式電動工具的安全.圓盤鋸的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for circular saws
|
| BS EN 60745-2-9-2003
| 手持式電動工具的安全.攻絲機的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for tappers
|
| BS EN 61029-2-11-2003
| 移動式電動工具的安全.組合橫切鋸和臺鋸的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for combined mitre and bench saws
|
| BS EN 61029-2-4-2003
| 移動式電動工具的安全.臺式磨床的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for bench grinders
|
| BS EN 61029-2-8-2003
| 移動式電動工具的安全.單芯軸垂直模壓機的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for single spindle vertical moulders
|
| BS EN 61029-2-9-2003
| 移動式電動工具的安全.斜切鋸的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for mitre saws
|
| BS EN 61310-1-1995
| 機械安全.指示,標志和活動.第1部分:可視,可聽和可觸模信號要求
| Safety of machinery - Indication, marking and actuation - Requirements for visual, auditory and tactile signals
|
| BS EN 61310-2-1995
| 機械安全性.指示,標志和作動.第2部分:標志要求
| Safety of machinery - Indication, marking and actuation - Requirements for marking
|
| BS EN 61310-3-1999
| 機械安全性.指示、標志和作動.作動位置和操作要求
| Safety of machinery - Indication, marking and actuation - Requirements for the location and operation of actuators
|
| BS EN 61472-2005
| 帶電作業.電壓范圍為72.5 kV至800 kV的交流系統的最小安全距離.計算方法
| Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
|
| BS EN 61496-1-2004
| 機械安全.電敏保護設備.一般要求和試驗
| Safety of machinery - Electro-sensitive protective equipment - General requirements and tests
|
| BS EN 61496-3-2001
| 機械安全性.電敏防護設備.防漫反射有源光電子保護器件專門要求
| Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
|
| BS EN 61965-2003
| 陰極射線管的機械安全
| Mechanical safety of cathode ray tubes
|
| BS EN 62061-2005
| 機械安全.與安全有關的電氣、電子和可編程序電子控制系統的功能安全
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
|
| BS EN 811-1997
| 機械的安全性.預防被低處部件碰撞的危險區安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
|
| BS EN 848-1-2007
| 木工機械安全.帶旋轉刀具的單面鏤銑機.第1部分:單軸立式鏤銑機
| Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
|
| BS EN 848-2-2007
| 木工機械安全.帶旋轉刀具的單面鏤銑機.第2部分:單軸手動進料/一體進料鏤銑機
| Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
|
| BS EN 848-3-2007
| 木工機械安全.旋轉刀具單面模壓機械.數控鏜床和靠模銑床
| Safety of woodworking machines - One side moulding machines with rotating tools - Numerically controlled (NC) boring and routing machines
|
| BS EN 859-1998
| 木工機械安全.手送表面刨平機械
| Safety of woodworking machines - Handfed surface planing machines
|
| BS EN 860-2007
| 木工機械安全.單面厚度刨床
| Safety of woodworking machines - One side thickness planing machines
|
| BS EN 861-2007
| 木工機械安全.平面刨床和增厚機
| Safety of woodworking machines - Surface planing and thicknessing machines
|
| BS EN 953-1998
| 機械安全的性.防護裝置.固定和移動防護裝置的設計和構造的一般要求
| Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
| BS EN ISO 10418-2003
| 石油和天然氣工業.近海生產裝置.基礎表面操作安全系統
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
| BS EN ISO 11161-2007
| 機械安全.集成制造系統.基本要求
| Safety of machinery - Integrated manufacturing systems - Basic requirements
|
| BS EN ISO 11553-1-2005
| 機械安全.激光加工機械.一般安全要求
| Safety of machinery - Laser processing machines - General safety requirements
|
| BS EN ISO 11553-2-2007
| 機械安全.激光加工機械.手持式激光加工設備的安全要求
| Safety of machinery - Laser processing machines - Safety requirements for hand-held laser processing devices
|
| BS EN ISO 12100-1-2003
| 機械安全.設計基本概念和一般原理.基本術語和方法
| Safety of machinery - Basic concepts, general principles for design - Basic terminology, methodology
|
| BS EN ISO 12100-2-2003
| 機械安全.設計基本概念和一般原理.技術原理
| Safety of machinery - Basic concepts, general principles for design - Technical principles
|
| BS EN ISO 13849-1-2006
| 機械安全.安全相關的控制系統部件.一般設計原則
| Safety of machinery - Safety-related parts of control systems - General principles for design
|
| BS EN ISO 13849-2-2003
| 機械安全.控制系統有關安全部分.確認
| Safety of machinery - Safety-related parts of control systems - Validation
|
| BS EN ISO 13850-2007
| 機械安全.緊急停止.設計原則
| Safety of machinery - Emergency stop - Principles for design
|
| BS EN ISO 14121-1-2007
| 機械安全.危險評估.原則
| Safety of machinery - Risk assessment - Principles
|
| BS EN ISO 14159-2004
| 機械安全.機械設計的衛生要求
| Safety of machinery - Hygiene requirements for the design of machinery
|
| BS EN ISO 21469-2006
| 機械安全.附帶產品接觸的潤滑劑.衛生要求
| Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
|
| BS ISO 15870-2001
| 工業用機動卡車.安全標志和危險圖示.一般原則
| Powered industrial trucks - Safety signs and hazard pictorials - General principles
|
| BS ISO 16069-2004
| 圖形符號.安全標志.安全路徑指示系統(SWGS)
| Graphical symbols - Safety signs - Safety way guidance systems (SWGS)
|
| BS ISO 17080-2007
| 手持便攜式農業和林業機械與電動草坪和園藝設備.單面產品安全標簽的設計原則
| Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels
|
| DD ENV 581-2-2000
| 戶外家具.野營、家用和訂做的座椅和桌子.座椅的機械安全要求和試驗方法
| Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for seating
|
| FD E09-027-1999
| 機械安全性.控制系統與安全相關的零部件.第100部分:EN 954-1-1996的應用指南
| Safety of machinery - Safety-related parts of control systems - Part 100 : guide on the use and application of EN 954-1:1996.
|
| KT 8-1999
| 機械安全性
| Safety of machinery
|
| 編號 | 中文名稱 | 英文名稱 |
|---|