| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60204-1-2005
| 機械安全.機器的電氣設備.第1部分:一般要求
| Safety of machinery - Electrical equipment of machines - Part 1: General requirements
|
| IEC 60745-2-13-2006
| 手持式電動工具的安全 第2-13部:鏈鋸的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
|
| IEC 60745-2-14 AMD 1-2006
| 手持式電動工具的安全.第2-14部分:刨刀的特殊要求.修改件1
| Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers; Amendment 1
|
| IEC 60745-2-14 Edition 2.1-2006
| 手持式電動工具的安全.第2-14部分:刨刀的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
|
| IEC 60745-2-14-2003
| 手持式電動工具的安全.第2-14部分:電刨的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
|
| IEC 60745-2-16-1993
| 手持式電動工具的安全 第2-16部分:鉚釘機的特殊要求
| Safety of hand-held motor-operated electric tools; part 2: particular requirements for tackers
|
| IEC 60745-2-17-2003
| 手持式電動工具的安全.第2-17部分:木銑和修整機的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
|
| IEC 60745-2-18-2003
| 手持式電動工具的安全.第2-18部分:打包工具的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
|
| IEC 60745-2-20-2003
| 手持式電動工具的安全.第2-20部分:帶鋸的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
|
| IEC 60745-2-3-2006
| 手持式電動工具的安全 第2-3部分:電動砂輪機、拋光機和盤式砂光機的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
|
| IEC 60745-2-4-2006
| 手持式電動工具的安全.第2-4部分:盤式除外的砂輪機和拋光機的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
|
| IEC 60745-2-6-2005
| 手持式電動工具的安全.第2-6部分:電錘的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
|
| IEC 60745-2-7-1989
| 手持式電動工具的安全 第2-7部分:不可燃液體用噴槍的特殊要求
| Safety of hand-held motor-operated electric tools; part 2: particular requirements for spray guns for non-flammable liquids
|
| IEC 60745-2-8-2003
| 手持式電動工具的安全.第2-8部分:金屬板剪和步?jīng)_輪廓機的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for sheet metal shears and nibblers
|
| IEC 60745-2-9-2003
| 手持式電動工具的安全.第2-9部分:攻絲機的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
|
| IEC 60960-1988
| 核電站安全參數顯示系統的功能設計準則
| Functional design criteria for a safety parameter display system for nuclear power stations
|
| IEC 61029-1-1990
| 移動式電動工具的安全 第1部分:一般要求
| Safety of transportable motor-operated electric tools; part 1: general requirements
|
| IEC 61029-2-1 AMD 1-1999
| 移動式電動工具的安全 第2-1部分:園鋸的特殊要求 修改1
| Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws; Amendment 1
|
| IEC 61029-2-1 AMD 2-2001
| 移動式電動工具的安全 第2-1部分:圓鋸的特殊要求 修改2
| Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws; Amendment 2
|
| IEC 61029-2-1-1993
| 移動式電動工具的安全 第2-1部分:圓鋸的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for circular saws
|
| IEC 61029-2-10-1998
| 移動式電動工具的安全 第2-10部分:切割砂輪機的特殊要求
| Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
|
| IEC 61029-2-11-2001
| 移動或電動工具的安全 第2-11部分：斜角 臺式鋸的特殊要求
| Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws
|
| IEC 61029-2-2-1993
| 移動式電動工具的安全 第2-2部分:旋臂鋸的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for radial arm saws
|
| IEC 61029-2-3 AMD 1-2001
| 移動式電動工具的安全 第2-3部分:刨和刨板機的特殊要求 修改1
| Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers; Amendment 1
|
| IEC 61029-2-3-1993
| 移動式電動工具的安全 第2-3部分:刨和刨板機的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for planers and thicknessers
|
| IEC 61029-2-4 AMD 1-2001
| 移動式電動工具的安全 第2-4部分:臺式砂輪機的特殊要求 修改1
| Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders; Amendment 1
|
| IEC 61029-2-4-1993
| 移動式電動工具的安全 第2-4部分:臺式砂輪機的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for bench grinders
|
| IEC 61029-2-5 AMD 1-2001
| 移動式電動工具的安全 第2-5部分:帶鋸的特殊要求 修改1
| Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws; Amendment 1
|
| IEC 61029-2-5-1993
| 移動式電動工具的安全 第2-5部分:帶鋸的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for band saws
|
| IEC 61029-2-6-1993
| 移動式電動工具的安全 第2-6部分:注水金剛石鉆的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply
|
| IEC 61029-2-7-1993
| 移動式電動工具的安全 第2-7部分:注水金剛石鋸的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply
|
| IEC 61029-2-8 AMD 1-1999
| 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 修改1
| Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 1
|
| IEC 61029-2-8 AMD 2-2001
| 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 修改2
| Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 2
|
| IEC 61029-2-8-1995
| 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求
| Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders
|
| IEC 61029-2-9-1995
| 移動式電動工具的安全 第2-9部分:斜面鋸的特殊要求
| Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitre saws |
| IEC 61310-1-2007
| 機械安全.指示、標記和傳動.第1部分:視覺、聽覺和觸覺信號的要求
| Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
|
| IEC 61310-2-2007
| 機械安全.指示、標記和傳動.第2部分:標記的要求
| Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
|
| IEC 61310-3-2007
| 機械安全.指示、標記和傳動.第3部分:傳動裝置位置和操作的要求
| Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
|
| IEC 61472 Corrigendum 1-2005
| 帶電作業.電壓范圍為72.5 kV至800 kV的交流系統的最小安全距離.計算方法.勘誤1
| Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation; Corrigendum 1
|
| IEC 61472 Corrigendum 2-2006
| 帶電作業.電壓范圍為72.5kV至800kV的交流系統的最小安全距離.一種計算方法.技術勘誤2
| Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation; Corrigendum 2
|
| IEC 61472-2004
| 帶電作業.電壓范圍為72.5 kV至800 kV的交流系統的最小安全距離.計算方法
| Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
|
| IEC 61496-1 AMD 1-2007
| 機械安全.電敏保護設備.第1部分:一般要求和試驗.修改件1
| Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests; Amendment 1
|
| IEC 61965-2003
| 陰極射線管的機械安全
| Mechanical safety of cathode ray tubes
|
| IEC 62061 Corrigendum 1-2005
| 機械安全.與安全有關的電氣、電子和可編程序電子控制系統的功能安全.勘誤1
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems; Corrigendum 1
|
| IEC 62061-2005
| 機械安全.與安全有關的電氣、電子和可編程序電子控制系統的功能安全
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
|
| IEC/TS 62046-2004
| 機械安全.人體檢測用防護設備的應用
| Safety of machinery - Application of protective equipment to detect the presence of persons
|
| 編號 | 中文名稱 | 英文名稱 |
|---|