| 編號 | 中文名稱 | 英文名稱 |
|---|
| CR 954-100-1999
| 機械安全 控制系統安全相關部件 第100部分： EN 954-1:1996使用和應用指南
| Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996
|
| EN 1005-1-2001
| 機械安全 人體物理性能 第1部分：術語和定義
| Safety of machinery - Human physical performance - Part 1: Terms and definitions
|
| EN 1005-2-2003
| 機械安全 人體物理性能 第2部分：機械處理和機械元件手冊
| Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
|
| EN 1005-3-2002
| 機械安全 人體物理性能 第3部分：機械操作用推薦力限值
| Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
|
| EN 1010-3-2002
| 機械安全 印刷和紙張轉換機的設計和結構的安全要求 第3部分：切割機
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
|
| EN 1023-2-2000
| 辦公家具 屏風 第2部分：機械安全要求
| Office furniture - Screens - Part 2: Mechanical safety requirements
|
| EN 1034-1-2000
| 機械安全 造紙機械和精整機的設計和建造安全要求 第1部分：通用要求
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
|
| EN 1034-3-1999
| 機械安全 造紙機械和精整機的設計和建造安全要求 第3部分：卷紙機、縱切機和絞合機
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines
|
| EN 1037-1995
| 機械安全 避免意外起動
| Safety of machinery - Prevention of unexpected start-up
|
| EN 1050-1996
| 機械安全 危害評估原則
| Safety of machinery - Principles for risk assessment
|
| EN 1070-1998
| 機械安全 術語
| Safety of machinery - Terminology
|
| EN 1088-1995
| 機械安全 和保護裝置相連的鎖緊裝置 設計和選擇的原則
| Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
|
| EN 1093-1-1998
| 機械安全 空氣中有害物質排放的評估 第1部分：試驗方法的選擇
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
|
| EN 1093-11-2001
| 機械安全 空氣中有害物質排放的評估 第11部分：靜化指數
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
|
| EN 1093-3-1996
| 機械安全 空氣中有害物質排放的評估 第3部分：特定污染的排放率 實際污染物的分組試驗方法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Emission rate of a specified pollutant - Bench test method using the real pollutant
|
| EN 1093-4-1996
| 機械安全 空氣中有害物質排放的評估 第4部分：排氣系統的俘獲效率 示蹤法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
|
| EN 1093-6-1998
| 機械安全 空氣中有害物質排放的評估 第6部分：通過未經管道流出的質量來評價分離離效率
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
|
| EN 1093-7-1998
| 機械安全 空氣中有害物質排放的評估 第7部分：通過經管道流出的質量來評價分離離效率
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
|
| EN 1093-8-1998
| 機械安全 空氣中有害物質排放的評估 第8部分：分組法測定污染物的濃度參數
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
|
| EN 1093-9-1998
| 機械安全 空氣中有害物質排放的評估 第9部分：室內法測定污染物的濃度參數
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
|
| EN 12198-1-2000
| 機械安全 機械發射的輻射產生的危險的評定和減少 第1部分：一般原則
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
|
| EN 12198-2-2002
| 機械安全 機械發射的輻射產生的危險的評定和減少 第2部分：輻射劑量的測量程序
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
|
| EN 12198-3-2002
| 機械安全 機械發射的輻射產生的危險的評定和減少 第3部分：用衰變或屏蔽減少輻射
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
|
| EN 12626-1997
| 機械安全 激光加工機械 安全要求
| Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)
|
| EN 12786-1999
| 機械安全性 安全標準振動條款起草指南
| Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards
|
| EN 13478-2001
| 機械安全性 防火和保護
| Safety of machinery - Fire prevention and protection
|
| EN 13861-2002
| 機械安全性 機械設計中對人機工程學標準的采用指南
| Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
|
| EN 1746-1998
| 機械安全 安全標準的噪聲條款編寫指南
| Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
|
| EN 1760-1-1997
| 機械安全 壓敏防護裝置 第1部分：壓敏墊和壓敏地板的設計和試驗的一般原則
| Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
|
| EN 1760-2-2001
| 機械安全 壓敏防護裝置 第2部分：壓敏邊緣和壓敏棒設計和試驗的一般原則
| Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
|
| EN 292-1-1991
| 機械安全 設計用的基本概念、一般原則 第1部分：基本術語、方法論
| Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology
|
| EN 292-2-1991+A1-1995
| 機械安全 設計用的基本概念、一般原則 第2部分：技術原則和規范
| Safety of machinery; basic concepts, general principles for design; part 2: technical principles and specifications
|
| EN 294-1992
| 機械安全 避免上肢可到達危險區域的安全距離
| Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
|
| EN 294-1992
| 機械安全 避免上肢可到達危險區域的安全距離
| Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
|
| EN 349-1993
| 機械安全 避免擠壓人體各部分的最小間隙
| Safety of machinery; Minimum gaps to avoid crushing of parts of the human body
|
| EN 414-2000
| 機械安全 安全標準的起草和報批規則
| Safety of machinery - Rules for the drafting and presentation of safety standards
|
| EN 415-1-2000
| 包裝機械安全 第1部分：包裝機械及相關設備的術語和分類
| Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment
|
| EN 415-2-1999
| 包裝機械安全 第2部分：預成型剛性容器包裝機械
| Packaging machines safety - Part 2: Pre-formed rigid container packaging machines
|
| EN 415-3-1999
| 包裝機械安全 第3部分：成型、填充和密封機械
| Safety of packaging machines - Part 3: Form, fill and seal machines
|
| EN 415-4-1997+AC-2002
| 包裝機械安全 第4部分：貨盤裝載器和貨盤卸載器
| Safety of packaging machines - Part 4: Palletisers and depalletisers
|
| EN 418-1992
| 機械安全 功能方面的緊急停止設備 設計原則
| Safety of machinery; Emergency stop equipment, functional aspects; Principles for design
|
| EN 457-1992
| 機械安全 聽覺危險信號 一般要求、設計和測試（ISO 7731-1986，修改）
| Safety of machinery; Auditory danger signals; General requirements, design and testing (ISO 7731:1986, modified)
|
| EN 50144-1-1998+A1-2002+A2-2003
| 手持電動工具的安全 第1部分：一般要求
| Safety of hand-held electric motor operated tools - Part 1: General requirements
|
| EN 50144-2-13-2002
| 手持電動工具的安全性 第2-13部分：鏈鋸的特殊要求
| Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws
|
| EN 50144-2-15-2001
| 手持電動工具的安全性 第2-15部分：樹籬修整機的特殊要求
| Safety of hand-held electric motor operated tools - Part 2-15: Particular requirements for hedge trimmers
|
| EN 50144-2-3-2002
| 手持電動工具的安全性 第2-3部分：研磨機、圓盤磨光機和拋光機的特殊要求
| Safety of hand-held electric motor operated tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers
|
| EN 50144-2-7-2000
| 手持電動工具的安全 第2-7部分：噴槍的特殊要求
| Safety of hand-held electric motor operated tools - Part 2-7: Particular requirements for spray guns
|
| EN 527-2-2002
| 辦公家具 工作臺和辦公桌 第2部分：機械安全要求
| Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
|
| EN 547-1-1996
| 機械安全 人體測量 第1部分：確定整個人體進入機械設備通道所需尺寸的原則
| Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
|
| EN 547-2-1996
| 機械安全 人體測量 第2部分：確定進入通道所需尺寸的原則
| Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
|
| EN 547-3-1996
| 機械安全 人體測量 第3部分：人體測量數據
| Safety of machinery - Human body measurements - Part 3: Anthropometric data
|
| EN 563-1994+A1-1999+AC-2000
| 機械安全 可觸摸表面的溫度 確定熱表面溫度極限值的工效學數據
| Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces
|
| EN 574-1996
| 機械安全 雙柄控制設備 功能狀況 設計原則
| Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
|
| EN 581-3-1999
| 戶外家具 野營、家用和訂做的座椅和桌子 第3部分：桌子的機械安全要求和試驗方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables
|
| EN 60204-1-1997
| 機械安全 機械的電氣設備 第1部分：一般要求
| Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:1997)
|
| EN 60204-1/prA1-1998
| 機械安全 機械的電氣設備 第1部分：一般要求 修改prA1
| Amendment 1 to IEC 60204-1: Addition of Annex F (informative)
|
| EN 60204-1/prAA Alternative A-1999
| 機械安全 機械的電氣設備 第1部分：一般要求 修改prAA A
| Safety of machinery - Electrical equipment of machines - Part 1: General requirements; Amendment AA
|
| EN 60204-1/prAA Alternative B-1999
| 機械安全 機械的電氣設備 第1部分：一般要求 修改prAA B
| Safety of machinery - Electrical equipment of machines - Part 1: General requirements; Amendment AA
|
| EN 60204-1/prAA-1998
| 機械安全 機械的電氣設備 第1部分：一般要求 修改prAA
| Safety of machinery - Electrical equipment of machines - Part 1: General requirements
|
| EN 61029-1-2000+A11-2003+A12-2003
| 移動式電動工具的安全 第1部分：一般要求
| Safety of transportable motor-operated electric tools - Part 1: General requirements (IEC 61029-1:1990, modified)
|
| EN 61029-2-1-2002
| 移動式電動工具的安全 第2－1部分：圓鋸的特殊要求
| Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified)
|
| EN 61029-2-4-2003+A1-2003
| 移動式電動工具的安全 第２－４部分：臺式沙輪機的特殊要求
| Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993, modified)
|
| EN 61029-2-5-2002
| 移動式電動工具的安全 第2-5部分：帶狀鋸的特殊要求
| Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified)
|
| EN 61029-2-9-2002
| 移動式電動工具的安全 第2-9部分：斜切鋸的特殊要求
| Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modified)
|
| EN 61310-1-1995
| 機械安全 指示、標記和驅動 第1部分：可視、可聽和可觸覺信號要求
| Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995)
|
| EN 61310-2-1995
| 機械安全 指示、標記和驅動 第2部分：標記要求
| Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking (IEC 61310-2:1995)
|
| EN 61310-3-1999
| 機械安全 指示、標記和驅動 第3部分：驅動器的位置和操作要求
| Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators (IEC 61310-3:1999)
|
| EN 614-1-1995
| 機械安全 人類工程學設計原則 第1部分：術語和一般原則
| Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
|
| EN 614-2-2000
| 機械安全 人類工程學設計原則 第2部分：機械設計和工作任務間的相互作用
| Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
|
| EN 61496-1-1997
| 機械安全 電敏保護設備 第1部分：一般要求和試驗
| Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests (IEC 61496-1:1997) / Note: Includes Corrigendum to french version of September 2001
|
| EN 61496-3-2001
| 機械安全 電敏保護設備 第3部分：易引起漫反射的有源光電子保護器件設備的特殊要求
| Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) (IEC 61496-3:2001)
|
| EN 61965-2001
| 陰極射線管的機械安全
| Mechanical safety of cathode ray tubes (IEC 61965:2000) / Note: Endorsement notice
|
| EN 626-1-1994
| 機械安全 減少機械產生的危險物質對健康造成的危害 第1部分：機械制造原則和規范
| Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
|
| EN 626-2-1996
| 機械安全 減少機械產生的危險物質對健康造成的危害 第2部分：檢驗程序的指導方法
| Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
|
| EN 786-1996
| 花園設備 電動步行手扶剪草機和草地修邊機 機械安全
| Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety
|
| EN 811-1996
| 機械安全 防止被下肢碰撞的危險區安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
|
| EN 811-1996
| 機械安全 防止被下肢碰撞的危險區安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
|
| EN 842-1996
| 機械安全 可視危險信號 一般要求、設計和測試
| Safety of machinery - Visual danger signals - General requirements, design and testing
|
| EN 859-1997
| 木工機械安全 人工加料表面刨床
| Safety of woodworking machines - Handfed surface planing machines
|
| EN 860-1997
| 木工機械安全 單面厚度刨床
| Safety of woodworking machines - One side thickness planing machines
|
| EN 861-1997
| 木工機械安全 表面刨平和厚度機械
| Safety of woodworking machines - Surface planing and thicknessing machines
|
| EN 894-1-1997
| 機械安全 顯示器和控制致動器設計的人類工程學要求 第1部分：人與顯示器和控制致動器相互作用的一般原則
| Safety of machinery - Ergonomic requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
|
| EN 894-2-1997
| 機械安全 顯示器和控制致動器設計的人類工程學要求 第2部分：顯示器
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
|
| EN 894-3-2000
| 機械安全 顯示器和控制致動器設計的人類工程學要求 第3部分：控制致動器
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
|
| EN 953-1997
| 機械安全 防護裝置 固定和移動防護裝置構造和設計的一般要求
| Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
| EN 954-1-1996
| 機械安全 控制系統部件的安全 第1部分：設計的一般原則
| Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
|
| EN 981-1996
| 機械安全 危險信號的視聽系統
| Safety of machinery - System of auditory and visual danger and information signals
|
| EN 983-1996
| 機械安全 流體動力系統及其元件的安全要求 氣壓裝置
| Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
|
| EN 999-1998
| 機械安全 有關與人體部分接近速度的保護設備的位置
| Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
|
| EN ISO 13849-2-2003
| 機械安全 控制系統有關安全部件 第2部分：振動
| Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003)
|
| EN ISO 14738-2002
| 機械安全 機械工作站設計的人體測量要求
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002)
|
| ENV 581-2-2000
| 戶外家具 野營、家用和訂做的座椅和桌子 第2部分：樣品的機械安全要求和試驗方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for sampling
|
| prEN 1005-4-2002
| 機械安全 人體物理性能 第4部分：與機械有關的工作狀態和移動評估
| Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
|
| prEN 12044-1998
| 鞋類、皮革及仿皮革制品制造機械 切割及沖壓機械安全要求
| Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
|
| prEN 12937-1997
| 機械安全性 可動和升降機械的技術原理和指標
| Safety of machinery - Technical principles and specifications for mobility and for lifting
|
| prEN 13451-9-1998
| 泳池設備 第9部分：安全標志
| Swimming pool equipment - Part 9: Safety signs
|
| prEN 13675-1999
| 機械安全性 軋管和滾軋機及線材加工設備的安全要求
| Safety of machinery - Safety requirements for tube forming and rolling mills and finishing line equipment
|
| prEN 14010-2003
| 機械安全 機械化汽車停車場設備 設計 制造 安裝和經營階段的電磁兼容性（EMC）要求和安全
| Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
|
| prEN 14386-2002
| 機械安全 移動機械可操作性的人類工效學設計原則
| Safety of machinery - Ergonomic design principles for the operability of mobile machinery
|
| prEN 1743-2-1994
| 家具 家用、承包和野營用戶外餐桌 第2部分：機械安全要求和試驗
| Furniture - Outdoor tables for domestic, contract and camping use - Part 2: Mechanical safety requirements and test methods
|
| prEN 2349-601-2000
| 航空航天系列 繼電器和接觸器要求和試驗程序 第601部分：周?chē)踩嚯x
| Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance
|
| prEN 60745-2-12-2002
| 手持式電動工具的安全 第２－１２部分：混凝土震動器的特殊要求 草案
| IEC 60745-2-12, Ed. 2: Safety of hand-held motor-operated electric tools - Part 2-12: Particular requirements for concrete vibrators
|
| prEN 60745-2-18-2003
| 手持式電動工具的安全 第２－１８部分：打包工具的特殊要求 草案
| Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified)
|
| prEN 60745-2-19-2002
| 手持式電動工具的安全 第２－１９部分：長刨的特殊要求 草案
| Safety of hand-held motor-operated electric tools - Part 2-19: Particular requirements for jointers
|
| prEN 60745-2-21-2001
| 手持式電動工具的安全 第２－２１部分：排水溝清理機的特殊要求 草案
| IEC 60745-2-21, Ed. 1.0: Safety of hand-held motor-operated electric tools - Part 2-21: Particular requirements for drain cleaners
|
| prEN 61029-2-11-2001
| 移動式電動工具的安全 第２－１１部分：４５度角斜面接口椅的特殊要求
| Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws (IEC 61029-2-11:2001, modified)
|
| prEN 61029-2-2-1997
| 移動式電動工具的安全 第２－２部分：旋臂鋸的特殊要求
| Safety of transportable motor-operated electric tools - Part 2: Particular requirements for radial arm saws (IEC 61029-2-2:1993, modified)
|
| prEN 61029-2-3-1997
| 移動式電動工具的安全 第２－３部分：刨和刨板機的特殊要求
| Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993, modified)
|
| prEN 61029-2-6-1992
| 移動式電動工具的安全 第２－６部分：注水金剛石鉆的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply
|
| prEN 61029-2-7-1992
| 移動式電動工具的安全 第２－７部分：注水金剛石鋸的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply
|
| prEN 61029-2-8-2002
| 移動式電動工具的安全 第２－８部分：?jiǎn)涡据S垂直模壓機的特殊要求
| Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995 + A1:1999 + A2:2001, modified)
|
| prEN 61472-2003
| 帶電作業 最小安全距離 計算方法
| IEC 61472, Ed. 2.0: Live working - Minimum approach distances for A.C. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
|
| prEN 61496-1-2003
| 機械安全 電敏保護設備 第1部分：一般要求和試驗
| IEC 61496-1: Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
|
| prEN 61965-2003
| 陰級射線管的機械安全
| IEC 61965, Ed. 2: Mechanical safety of cathode ray tubes
|
| prEN 954-2-1999
| 機械安全 控制系統部件的安全 第2部分：確認
| Safety of machinery - Safety-related parts of control systems - Part 2: Validation
|
| prEN ISO 11553-1-2002
| 機械安全 激光加工機械 安全要求
| Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02).
|
| prEN ISO 12100-1-2003
| 機械安全 設計用的基本概念、一般原則 第1部分：基本術語、方法論
| Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO/FDIS 12100-1:2003)
|
| prEN ISO 12100-2-2003
| 機械安全 設計用的基本概念、一般原則 第2部分：技術原則
| Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO/FDIS 12100-2:2003)
|
| prEN ISO 4126-4-2003
| 保護額外壓力的安全設備 第4部分：飛行員操作安全閥
| Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|