| 編號 | 中文名稱 | 英文名稱 |
|---|
| ISO 10418-2003
| 石油和天然氣工業.近海生產裝置.基礎表面操作安全系統
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
| ISO 10517-1993
| 便攜式電動樹 籬修剪機 定義、機械安全要求和試驗
| Portable powered hedge trimmers; definitions, mechanical safety requirements and tests
|
| ISO 11161-2007
| 機械安全.集成制造系統.基本要求
| Safety of machinery - Integrated manufacturing systems - Basic requirements
|
| ISO 11553-1-2005
| 機械安全.激光加工機械.第1部分:一般安全要求
| Safety of machinery - Laser processing machines - Part 1: General safety requirements
|
| ISO 11553-2-2007
| 機械安全.激光加工機械.第2部分:手持激光加工裝置的安全性要求
| Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices
|
| ISO 11684-1995
| 拖拉機、農林機械、動力草坪和園藝設備 安全標志和危險圖示 通用規則
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles
|
| ISO 12100-1-2003
| 機械安全.基本概念和設計通則.第1部分:基本術語、方法學
| Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology
|
| ISO 12100-2-2003
| 機械安全.基本概念和設計通則.第2部分:技術原理
| Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles
|
| ISO 12499-1999
| 工業風機 風機的機械安全裝置 護罩
| Industrial fans - Mechanical safety of fans - Guarding
|
| ISO 13200-1995
| 起重機 安全標志和危險圖示 總則
| Cranes - Safety signs and hazard pictorials - General principles
|
| ISO 13849-1-2006
| 機械安全.控制系統的相關安全部分.第1部分:設計用一般原理
| Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
|
| ISO 13849-2-2003
| 機械安全.控制系統的安全相關部件.第2部分:驗證
| Safety of machinery - Safety-related parts of control systems - Part 2: Validation
|
| ISO 13850-2006
| 機械安全.事故停機.設計原則
| Safety of machinery - Emergency stop - Principles for design
|
| ISO 13851-2002
| 機械安全.雙手控制器.功能問題和設計原理
| Safety of machinery - Two-hand control devices - Functional aspects and design principles
|
| ISO 13852-1996
| 機械安全 防止上肢觸及危險區的安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs
|
| ISO 13852-1996
| 機械安全 防止上肢觸及危險區的安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs
|
| ISO 13853-1998
| 機械安全 防止下肢觸及危險區的安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
|
| ISO 13853-1998
| 機械安全 防止下肢觸及危險區的安全距離
| Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
|
| ISO 13854-1996
| 機械安全 避免人體部分擠壓的最小間距
| Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
|
| ISO 13855-2002
| 機械安全.保護設備相對于人體部位接近速度的定位
| Safety of machinery - Positioning of protective equipment with respect to the approach speeds of parts of the human body
|
| ISO 13856-1-2001
| 機械安全 壓敏保護裝置 第1部分：壓敏墊和壓敏地板的設計和試驗一般原則
| Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
|
| ISO 13856-2-2005
| 機械安全.壓敏保護裝置.第2部分:壓敏邊緣和壓敏條的設計和試驗的一般原則
| Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars
|
| ISO 13856-3-2006
| 機械安全.壓敏保護裝置.第3部分:壓敏減震器、壓敏平板和壓敏帶和類似裝置設計和測試用一般原則
| Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices
|
| ISO 14118-2000
| 機械安全 防止意外啟動
| Safety of machinery - Prevention of unexpected start-up
|
| ISO 14119 AMD 1-2007
| 機械安全.與保護裝置結合的聯鎖裝置.設計和選擇原則.修改件1:最小化失敗可能性的設計
| Safety of machinery - Interlocking devices associated with guards - Principles for design and selection; Amendment 1: Design to minimize defeat possibilities
|
| ISO 14119-1998
| 機械安全 帶有聯鎖裝置的保護裝置 設計和選擇原則
| Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
|
| ISO 14120-2002
| 機械安全.保護裝置.固定和可移動保護裝置的設計和制造的一般要求
| Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
| ISO 14121-1-2007
| 機械安全.危險評估.第1部分:原理
| Safety of machinery - Risk assessment - Part 1: Principles
|
| ISO 14122-1-2001
| 機械安全 接近機械的固定方式 第1部分：兩層間通道的固定方式的選擇
| Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels
|
| ISO 14122-2-2001
| 機械安全 接近機械的固定方式 第2部分：工作臺和通道
| Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
|
| ISO 14122-3-2001
| 機械安全 接近機械的固定方式 第3部分：樓梯、活梯和護欄
| Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
|
| ISO 14122-4-2004
| 機械安全.接近機械的固定方式.第4部分:固定梯
| Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
|
| ISO 14123-1-1998
| 機械安全 減小用油機械排放的危害性物質對健康的風險 第1部分:用于機械制造商的原則和規范
| Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
|
| ISO 14123-2-1998
| 機械安全 減小用油機械排放的危害性物質對健康的風險 第2部分:產品驗證程序的方法學
| Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
|
| ISO 14159-2002
| 機械安全.機械設計的衛生要求
| Safety of machinery - Hygiene requirements for the design of machinery
|
| ISO 14738 Technical Corrigendum 1-2003
| 機械安全.機械工作臺設計的人類工效學要求.技術勘誤1
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery; Technical Corrigendum 1
|
| ISO 14738 Technical Corrigendum 2-2005
| 機械安全.機械旁工作臺設計的人體測量學要求.技術勘誤2
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery; Technical Corrigendum 2
|
| ISO 14738-2002
| 機械安全.機械旁工作臺設計的人類工效學要求
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery
|
| ISO 14943-2004
| 核燃料技術.核臨界安全的相關管理標準
| Nuclear fuel technology - Administrative criteria related to nuclear criticality safety
|
| ISO 15534-1-2000
| 機械安全工效學設計 第1部分:人體進入機械入孔開口的尺寸測定原則
| Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
|
| ISO 15534-2-2000
| 機械安全工效學設計 第2部分:進入入孔開口所要求的尺寸測定原則
| Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings
|
| ISO 15534-3-2000
| 機械安全工效學設計 第3部分:人體測量數據
| Ergonomic design for the safety of machinery - Part 3: Anthropometric data
|
| ISO 15870-2000
| 機動工業車輛 安全標志和危險圖示 一般原則
| Powered industrial trucks - Safety signs and hazard pictorials - General principles
|
| ISO 16069-2004
| 圖形符號.安全標志.安全路徑指示系統
| Graphical symbols - Safety signs - Safety way guidance systems (SWGS)
|
| ISO 17080-2005
| 便攜式農林業機械和電動草坪園藝設備.單片式產品安全標簽的設計原理
| Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels
|
| ISO 17398-2004
| 安全色和安全標志.安全標志的分類、性能和耐久性
| Safety colours and safety signs - Classification, performance and durability of safety signs
|
| ISO 19353-2005
| 機械安全.防火
| Safety of machinery - Fire prevention and protection
|
| ISO 20712-2-2007
| 水域安全標志和沙灘安全標志.第2部分:沙灘安全標志用規范.顏色、形狀、含義和性能
| Water safety signs and beach safety flags - Part 2: Specifications for beach safety flags - Colour, shape, meaning and performance
|
| ISO 21469-2006
| 機械安全.與附屬產品接觸的潤滑劑.衛生要求
| Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
|
| ISO 3864-1-2002
| 圖形符號.安全色和安全標志.第1部分:在工作場所和公共領域中的安全標志設計原理
| Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs in workplaces and public areas
|
| ISO 3864-2-2004
| 圖形符號.安全色和安全標志.第2部分:產品安全標簽的設計原理
| Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels
|
| ISO 3864-2-2004
| 圖形符號.安全色和安全標志.第2部分:產品安全標簽的設計原理
| Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels
|
| ISO 3864-3-2006
| 圖形符號.安全色和安全標志.第3部分:用于安全標簽的圖形符號的設計原理
| Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs
|
| ISO 3864-3-2006
| 圖形符號.安全色和安全標志.第3部分:用于安全標簽的圖形符號的設計原理
| Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs
|
| ISO 6309-1987
| 火災防護措施 安全標志 兩種語言版
| Fire protection; Safety signs Bilingual edition
|
| ISO 7010 AMD 1-2006
| 圖形符號.安全顏色和安全標志.用于工作地點及公共場所的安全標志
| Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas
|
| ISO 7010 AMD 2-2007
| 圖形符號.安全色和安全標志.工作場所和公共場所用安全標志.修改件2
| Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas; Amendment 2
|
| ISO 7010-2003
| 圖形符號.安全顏色和安全標志.用于工作地點及公共場所的安全標志
| Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas
|
| ISO/IEC Guide 50-1987
| 兒童安全和標準 一般指南
| Child safety and standards; general guidelines
|
| ISO/TR 13849-100-2000
| 機械安全 控制系統有關安全部件 第100部分:ISO 13849-1的使用指南
| Safety of machinery - Safety-related parts of control systems - Part 100: Guidelines for the use and application of ISO 13849-1
|
| ISO/TR 18569-2004
| 機械安全.機械安全標準的理解和使用指南
| Safety of machinery - Guidelines for the understanding and use of safety of machinery standards
|
| 編號 | 中文名稱 | 英文名稱 |
|---|